Bug#592943: Can't connect to WEP network: "eth1: Lucent/Agere firmware doesn't support manual roaming"
Package: linux-2.6
Version: 2.6.32-18
Severity: normal
I cannot connect to a WEP network. The kde network manager
keeps asking me for the password. This is after a complete
reinstall of Debian Squeeze. Connecting to the very same
network worked when the machine was still running Lenny.
One other way to connect is to use the kernel shipped with
Ubuntu 10.4. The firmware-linux-nonfree package needs to
be removed for this---I guess they ship their own firmware.
In case you wonder about the linux-base package from
experimenal: it was pulled in when I installed the 2.6.35
kernel from experimental. That did not appear to change
anything, but I am too scared to downgrade again.
-- Package-specific info:
** Version:
Linux version 2.6.32-5-686 (Debian 2.6.32-18) (ben@decadent.org.uk) (gcc
version 4.3.5 (Debian 4.3.5-2) ) #1 SMP Sat Jul 24 02:27:10 UTC 2010
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686
root=UUID=2b4fbfbd-8cd8-4da5-b90c-7b281a41435b ro quiet
** Not tainted
** Kernel log:
[ 7.901738] intel_rng: FWH not detected
[ 7.925838] dcdbas dcdbas: Dell Systems Management Base Driver
(version 5.6.0-3.2)
[ 8.036778] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input7
[ 8.037020] ACPI: Video Device [GRFX] (multi-head: yes rom: yes
post: no)
[ 8.100735] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.889669] [drm] Initialized drm 1.1.0 20060810
[ 8.970529] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI
10 (level, low) -> IRQ 10
[ 9.125816] pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 10
(level, low) -> IRQ 10
[ 9.125833] pci 0000:00:02.0: setting latency timer to 64
[ 9.138369] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on
minor 0
[ 9.412976] yenta_cardbus 0000:02:03.0: CardBus bridge found [1028:0122]
[ 9.541048] yenta_cardbus 0000:02:03.0: ISA IRQ mask 0x00b8, PCI irq 10
[ 9.541061] yenta_cardbus 0000:02:03.0: Socket status: 30000006
[ 9.541081] yenta_cardbus 0000:02:03.0: pcmcia: parent PCI bridge I/O
window: 0xa000 - 0xafff
[ 9.541093] pcmcia_socket pcmcia_socket0: cs: IO port probe
0xa000-0xafff: clean.
[ 9.542535] yenta_cardbus 0000:02:03.0: pcmcia: parent PCI bridge
Memory window: 0xe0200000 - 0xe02fffff
[ 9.542547] yenta_cardbus 0000:02:03.0: pcmcia: parent PCI bridge
Memory window: 0x18000000 - 0x21ffffff
[ 9.543151] yenta_cardbus 0000:02:07.0: CardBus bridge found [12a3:ab01]
[ 9.543175] yenta_cardbus 0000:02:07.0: Enabling burst memory read
transactions
[ 9.543186] yenta_cardbus 0000:02:07.0: Using CSCINT to route CSC
interrupts to PCI
[ 9.543194] yenta_cardbus 0000:02:07.0: Routing CardBus interrupts to PCI
[ 9.543204] yenta_cardbus 0000:02:07.0: TI: mfunc 0x01000002, devctl 0x60
[ 9.773048] yenta_cardbus 0000:02:07.0: ISA IRQ mask 0x0000, PCI irq 10
[ 9.773061] yenta_cardbus 0000:02:07.0: Socket status: 30000010
[ 9.773072] pci_bus 0000:02: Raising subordinate bus# of parent bus
(#02) from #04 to #07
[ 9.773097] yenta_cardbus 0000:02:07.0: pcmcia: parent PCI bridge I/O
window: 0xa000 - 0xafff
[ 9.773110] pcmcia_socket pcmcia_socket1: cs: IO port probe
0xa000-0xafff: clean.
[ 9.774549] yenta_cardbus 0000:02:07.0: pcmcia: parent PCI bridge
Memory window: 0xe0200000 - 0xe02fffff
[ 9.774560] yenta_cardbus 0000:02:07.0: pcmcia: parent PCI bridge
Memory window: 0x18000000 - 0x21ffffff
[ 10.234342] pcmcia_socket pcmcia_socket0: cs: IO port probe
0x100-0x3af: clean.
[ 10.235355] pcmcia_socket pcmcia_socket0: cs: IO port probe
0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 10.235854] pcmcia_socket pcmcia_socket0: cs: IO port probe
0x820-0x8ff: clean.
[ 10.236399] pcmcia_socket pcmcia_socket0: cs: IO port probe
0xc00-0xcf7: clean.
[ 10.237180] pcmcia_socket pcmcia_socket0: cs: IO port probe
0xa00-0xaff: clean.
[ 10.412083] pcmcia_socket pcmcia_socket1: pccard: PCMCIA card
inserted into slot 1
[ 10.528166] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 10
(level, low) -> IRQ 10
[ 10.528206] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 10.576068] pcmcia_socket pcmcia_socket1: cs: memory probe
0xe0200000-0xe02fffff: excluding 0xe0200000-0xe020ffff
[ 10.585810] pcmcia 1.0: pcmcia: registering new device pcmcia1.0
[ 10.594737] pcmcia_socket pcmcia_socket1: cs: IO port probe
0x100-0x3af: clean.
[ 10.595748] pcmcia_socket pcmcia_socket1: cs: IO port probe
0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 10.596585] pcmcia_socket pcmcia_socket1: cs: IO port probe
0x820-0x8ff: clean.
[ 10.597015] pcmcia_socket pcmcia_socket1: cs: IO port probe
0xc00-0xcf7: clean.
[ 10.597793] pcmcia_socket pcmcia_socket1: cs: IO port probe
0xa00-0xaff: clean.
[ 10.903008] cfg80211: Using static regulatory domain info
[ 10.903016] cfg80211: Regulatory domain: US
[ 10.903023] (start_freq - end_freq @ bandwidth), (max_antenna_gain,
max_eirp)
[ 10.903032] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 10.903041] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 10.903051] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 10.903059] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 10.903068] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 10.903077] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 10.903789] cfg80211: Calling CRDA for country: US
[ 11.342873] orinoco 0.15 (David Gibson
<hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
[ 11.396322] orinoco_cs 0.15 (David Gibson
<hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
[ 11.478151] orinoco_cs 1.0: Hardware identity 0005:0004:0005:0000
[ 11.478271] orinoco_cs 1.0: Station identity 001f:0001:0008:000a
[ 11.478281] orinoco_cs 1.0: Firmware determined as Lucent/Agere 8.10
[ 11.505283] orinoco_cs 1.0: firmware: requesting agere_sta_fw.bin
[ 11.680700] orinoco_cs 1.0: Hardware identity 0005:0004:0005:0000
[ 11.680832] orinoco_cs 1.0: Station identity 001f:0002:0009:0030
[ 11.680842] orinoco_cs 1.0: Firmware determined as Lucent/Agere 9.48
[ 11.680849] orinoco_cs 1.0: Ad-hoc demo mode supported
[ 11.680855] orinoco_cs 1.0: IEEE standard IBSS ad-hoc mode supported
[ 11.680862] orinoco_cs 1.0: WEP supported, 104-bit key
[ 11.680868] orinoco_cs 1.0: WPA-PSK supported
[ 11.736062] intel8x0_measure_ac97_clock: measured 53241 usecs (2558
samples)
[ 11.736073] intel8x0: clocking to 48000
[ 11.738639] Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] ->
GSI 10 (level, low) -> IRQ 10
[ 11.738689] Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
[ 13.215256] Adding 1100412k swap on /dev/sda5. Priority:-1 extents:1
across:1100412k
[ 13.649720] EXT3 FS on sda1, internal journal
[ 13.892941] loop: module loaded
[ 16.496916] fuse init (API version 7.13)
[ 18.622102] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input8
[ 22.443290] eth0: setting half-duplex.
[ 22.443473] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.458534] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 24.845814] apm: BIOS not found.
[ 26.924599] Bluetooth: Core ver 2.15
[ 26.924761] NET: Registered protocol family 31
[ 26.924767] Bluetooth: HCI device and connection manager initialized
[ 26.924776] Bluetooth: HCI socket layer initialized
[ 27.370439] Bluetooth: L2CAP ver 2.14
[ 27.370448] Bluetooth: L2CAP socket layer initialized
[ 27.489265] Bluetooth: RFCOMM TTY layer initialized
[ 27.489279] Bluetooth: RFCOMM socket layer initialized
[ 27.489285] Bluetooth: RFCOMM ver 1.11
[ 27.552180] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 27.552190] Bluetooth: BNEP filters: protocol multicast
[ 27.763804] Bridge firewalling registered
[ 27.873814] Bluetooth: SCO (Voice Link) ver 0.6
[ 27.873825] Bluetooth: SCO socket layer initialized
[ 29.246729] lp: driver loaded but no devices found
[ 29.493411] ppdev: user-space parallel port driver
[ 136.176757] eth1: Lucent/Agere firmware doesn't support manual roaming
[ 141.489899] eth1: Lucent/Agere firmware doesn't support manual roaming
[ 146.841274] eth1: Lucent/Agere firmware doesn't support manual roaming
[ 152.141743] eth1: Lucent/Agere firmware doesn't support manual roaming
** Model information
not available
** Loaded modules:
Module Size Used by
speedstep_ich 1765 0
speedstep_lib 2468 1 speedstep_ich
cpufreq_conservative 4018 0
cpufreq_stats 1940 0
cpufreq_userspace 1480 0
cpufreq_powersave 602 0
parport_pc 15799 0
ppdev 4058 0
lp 5570 0
parport 22554 3 parport_pc,ppdev,lp
sco 5857 2
bridge 32987 0
stp 996 1 bridge
bnep 7444 2
rfcomm 25167 0
l2cap 21705 4 bnep,rfcomm
crc16 1027 1 l2cap
bluetooth 36327 6 sco,bnep,rfcomm,l2cap
binfmt_misc 4907 1
uinput 4796 1
fuse 43758 1
loop 9757 0
michael_mic 1506 4
orinoco_cs 8013 1
orinoco 47577 1 orinoco_cs
cfg80211 87601 1 orinoco
rfkill 10264 3 bluetooth,cfg80211
snd_intel8x0m 8100 0
snd_intel8x0 19523 2
snd_ac97_codec 79148 2 snd_intel8x0m,snd_intel8x0
ac97_bus 710 1 snd_ac97_codec
snd_pcm_oss 28671 0
snd_mixer_oss 10461 1 snd_pcm_oss
pcmcia 17442 1 orinoco_cs
snd_pcm 47214 4
snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_seq_midi 3576 0
snd_rawmidi 12505 1 snd_seq_midi
yenta_socket 16403 4
snd_seq_midi_event 3684 1 snd_seq_midi
rsrc_nonstatic 7057 1 yenta_socket
snd_seq 35463 2 snd_seq_midi,snd_seq_midi_event
pcmcia_core 20450 4
orinoco_cs,pcmcia,yenta_socket,rsrc_nonstatic
i915 220208 1
i2c_i801 6462 0
drm_kms_helper 18305 1 i915
snd_timer 12258 2 snd_pcm,snd_seq
drm 112020 3 i915,drm_kms_helper
snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq
i2c_algo_bit 3497 1 i915
i2c_core 12696 5
i915,i2c_i801,drm_kms_helper,drm,i2c_algo_bit
snd 34363 14
snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
joydev 6771 0
shpchp 21220 0
video 14605 1 i915
dcdbas 3892 0
rng_core 2178 0
ac 1640 0
output 1204 1 video
battery 3782 0
evdev 5609 21
container 1833 0
pci_hotplug 18065 1 shpchp
processor 26599 1
soundcore 3450 1 snd
snd_page_alloc 5045 3 snd_intel8x0m,snd_intel8x0,snd_pcm
pcspkr 1207 0
psmouse 44657 0
button 3598 1 i915
serio_raw 2916 0
ext3 94204 1
jbd 32169 1 ext3
mbcache 3762 1 ext3
sd_mod 25869 3
crc_t10dif 1012 1 sd_mod
ata_generic 2019 0
ata_piix 17640 2
firewire_ohci 16509 0
thermal 9206 0
uhci_hcd 16057 0
libata 115721 2 ata_generic,ata_piix
3c59x 25040 0
floppy 40923 0
ehci_hcd 27851 0
firewire_core 31187 1 firewire_ohci
crc_itu_t 1035 1 firewire_core
thermal_sys 9378 3 video,processor,thermal
usbcore 98402 3 uhci_hcd,ehci_hcd
mii 2714 1 3c59x
scsi_mod 101401 2 sd_mod,libata
nls_base 4541 1 usbcore
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
#allow-hotplug eth0
#iface eth0 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast
state DOWN qlen 1000
link/ether 00:06:5b:89:aa:2d brd ff:ff:ff:ff:ff:ff
3: eth1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast
state DORMANT qlen 1000
link/ether 00:02:2d:59:33:e2 brd ff:ff:ff:ff:ff:ff
4: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
link/ether 5a:0e:5d:c5:1f:37 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed
multicast|bytes packets errs drop fifo colls carrier compressed
lo: 12644 190 0 0 0 0 0 0
12644 190 0 0 0 0 0 0
eth0: 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0
eth1: 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0
pan0: 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
144 total packets received
0 forwarded
0 incoming packets discarded
144 incoming packets delivered
144 requests sent out
12 outgoing packets dropped
Icmp:
20 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 20
20 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 20
IcmpMsg:
InType3: 20
OutType3: 20
Tcp:
51 active connections openings
5 passive connection openings
46 failed connection attempts
0 connection resets received
0 connections established
142 segments received
142 segments send out
0 segments retransmited
0 bad segments received.
46 resets sent
Udp:
8 packets received
20 packets to unknown port received.
0 packet receive errors
28 packets sent
UdpLite:
TcpExt:
5 TCP sockets finished time wait in fast timer
0 packet headers predicted
15 acknowledgments not containing data payload received
5 predicted acknowledgments
IpExt:
InOctets: 9424
OutOctets: 9424
*** Device features:
eth0: 0x803
eth1: 0x2000
lo: 0x13865
pan0: 0xff3865
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82830 830 Chipset Host
Bridge [8086:3575] (rev 04)
Subsystem: Dell Device [1028:0122]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at <unassigned> (32-bit, prefetchable)
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 82830 CGC
[Chipset Graphics Controller] [8086:3577] (rev 04) (prog-if 00 [VGA
controller])
Subsystem: Dell Device [1028:0122]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at e0000000 (32-bit, non-prefetchable) [size=512K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
00:02.1 Display controller [0380]: Intel Corporation 82830 CGC [Chipset
Graphics Controller] [8086:3577]
Subsystem: Dell Device [1028:0122]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (2500ns max)
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at e0080000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1d.0 USB Controller [0c03]: Intel Corporation 82801CA/CAM USB
Controller #1 [8086:2482] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0122]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 4: I/O ports at 8c80 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801CA/CAM USB
Controller #2 [8086:2484] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0122]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at 8ca0 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801CA/CAM USB
Controller #3 [8086:2487] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0122]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 11
Region 4: I/O ports at 8cc0 [size=32]
Kernel driver in use: uhci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev 42) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=07, sec-latency=168
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: e0200000-e02fffff
Prefetchable memory behind bridge: 18000000-21ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1f.0 ISA bridge [0601]: Intel Corporation 82801CAM ISA Bridge (LPC)
[8086:248c] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.1 IDE interface [0101]: Intel Corporation 82801CAM IDE U100
Controller [8086:248a] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Dell Device [1028:0122]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 9000 [size=16]
Region 5: Memory at 22000000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801CA/CAM SMBus Controller
[8086:2483] (rev 02)
Subsystem: Dell Device [1028:0122]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 10
Region 4: I/O ports at 8ce0 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 Multimedia audio controller [0401]: Intel Corporation
82801CA/CAM AC'97 Audio Controller [8086:2485] (rev 02)
Subsystem: Dell Device [1028:0122]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 10
Region 0: I/O ports at 8400 [size=256]
Region 1: I/O ports at 80c0 [size=64]
Kernel driver in use: Intel ICH
00:1f.6 Modem [0703]: Intel Corporation 82801CA/CAM AC'97 Modem
Controller [8086:2486] (rev 02) (prog-if 00 [Generic])
Subsystem: PCTel Inc Dell Inspiron 2100 internal modem [134d:4c21]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 10
Region 0: I/O ports at 8800 [size=256]
Region 1: I/O ports at 8c00 [size=128]
Kernel driver in use: Intel ICH Modem
02:03.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c475 [1180:0475] (rev b8)
Subsystem: Dell Device [1028:0122]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e0201000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=03, sec-latency=176
Memory window 0: 18000000-1bfff000 (prefetchable)
Memory window 1: 24000000-27fff000
I/O window 0: 0000a400-0000a4ff
I/O window 1: 0000a800-0000a8ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+
PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
02:03.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C551 IEEE 1394
Controller [1180:0551] (prog-if 10 [OHCI])
Subsystem: Dell Device [1028:0122]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max)
Interrupt: pin B routed to IRQ 11
Region 0: Memory at e0200000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
02:05.0 Ethernet controller [0200]: 3Com Corporation 3c905C-TX/TX-M
[Tornado] [10b7:9200] (rev 78)
Subsystem: Dell Device [1028:0122]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 80 (2500ns min, 2500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at a000 [size=128]
Region 1: Memory at e0200800 (32-bit, non-prefetchable) [size=128]
[virtual] Expansion ROM at 20000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: 3c59x
02:07.0 CardBus bridge [0607]: Texas Instruments PCI1410 PC card Cardbus
Controller [104c:ac50] (rev 01)
Subsystem: Lucent Technologies Device [12a3:ab01]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e0202000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=04, subordinate=07, sec-latency=176
Memory window 0: 1c000000-1ffff000 (prefetchable)
Memory window 1: 28000000-2bfff000
I/O window 0: 0000ac00-0000acff
I/O window 1: 00001000-000010ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt-
PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
** USB devices:
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/1 CPU core)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-686 depends on:
ii debconf [debconf 1.5.33 Debian configuration
management sy
ii initramfs-tools 0.97.2 tools for generating an
initramfs
ii linux-base 2.6.35-1~experimental.1 Linux image base package
ii module-init-tool 3.12-1 tools for managing Linux
kernel mo
Versions of packages linux-image-2.6.32-5-686 recommends:
pn firmware-linux-free <none> (no description available)
ii libc6-i686 2.11.2-2 GNU C Library: Shared
libraries [i
Versions of packages linux-image-2.6.32-5-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
ii firmware-linux-nonfree 0.26 Binary firmware for various
driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: true
linux-image-2.6.32-5-686/prerm/would-invalidate-boot-loader-2.6.32-5-686: true
linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false
linux-image-2.6.32-5-686/postinst/ignoring-do-bootloader-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/bootloader-test-error-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/bootloader-error-2.6.32-5-686:
* linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686:
Reply to: