--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.30-1-686: pcspeaker mute
- From: Erwan David <erwan@rail.eu.org>
- Date: Wed, 02 Sep 2009 14:07:10 +0200
- Message-id: <20090902120710.18277.20658.reportbug@anticosti.trusted-logic.fr>
Package: linux-image-2.6.30-1-686
Version: 2.6.30-6
Severity: normal
Since upgrading to 2.6.30, my pcspeaker is mute, instead beeps are
sent to the soundcard which is a regeression since my sound card
usually has no speaker, only a headphone from time to time.
-- Package-specific info:
** Version:
Linux version 2.6.30-1-686 (Debian 2.6.30-6) (waldi@debian.org) (gcc version 4.3.4 (Debian 4.3.4-1) ) #1 SMP Sat Aug 15 19:11:58 UTC 2009
** Command line:
root=/dev/md0 ro quiet
** Tainted: P (1)
** Kernel log:
[ 5.329538] sdb:<6> sda:<6>input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input1
[ 5.330024] generic-usb 0003:413C:2003.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.0-2/input0
[ 5.330036] usbcore: registered new interface driver usbhid
[ 5.330038] usbhid: v2.6:USB HID core driver
[ 5.331877] sdb1 sdb2 < sda1 sda2 < sdb5 sda5 sdb6 >
[ 5.363651] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 5.372319] sda6 >
[ 5.372461] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.374536] Driver 'sr' needs updating - please use bus_type methods
[ 5.378892] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.378895] Uniform CD-ROM driver Revision: 3.20
[ 5.378960] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 5.383578] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.383601] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 5.383621] sr 2:0:0:0: Attached scsi generic sg2 type 5
[ 5.614038] md: raid1 personality registered for level 1
[ 5.620351] md: md0 stopped.
[ 5.639410] md: bind<sdb1>
[ 5.639562] md: bind<sda1>
[ 5.640629] raid1: raid set md0 active with 2 out of 2 mirrors
[ 5.640891] md: md1 stopped.
[ 5.640964] md0: unknown partition table
[ 5.657994] md: bind<sdb6>
[ 5.658127] md: bind<sda6>
[ 5.659168] raid1: raid set md1 active with 2 out of 2 mirrors
[ 5.659406] md1: unknown partition table
[ 5.792181] kjournald starting. Commit interval 5 seconds
[ 5.792185] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.803413] udev: starting version 141
[ 8.356574] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 8.358551] parport_pc 00:06: reported by Plug and Play ACPI
[ 8.358602] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 8.374009] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 8.380258] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 8.380283] ACPI: Power Button [PWRF]
[ 8.380334] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 8.380354] ACPI: Power Button [VBTN]
[ 8.437266] processor ACPI_CPU:00: registered as cooling_device0
[ 8.437325] processor ACPI_CPU:01: registered as cooling_device1
[ 8.443791] EDAC MC: Ver: 2.1.0 Aug 15 2009
[ 8.456479] x38: mmio space beyond accessible range (0xbfeda0000)
[ 8.467168] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 20 (level, low) -> IRQ 20
[ 8.980482] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.980502] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 9.401327] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[ 10.319399] EXT3 FS on md0, internal journal
[ 10.516221] loop: module loaded
[ 10.588921] coretemp coretemp.0: Using relative temperature scale!
[ 10.588956] coretemp coretemp.1: Using relative temperature scale!
[ 10.638969] usbcore: registered new interface driver usbserial
[ 10.638981] USB Serial support registered for generic
[ 10.638996] usbcore: registered new interface driver usbserial_generic
[ 10.638998] usbserial: USB Serial Driver core
[ 10.647918] USB Serial support registered for Handspring Visor / Palm OS
[ 10.647928] USB Serial support registered for Sony Clie 3.5
[ 10.647938] USB Serial support registered for Sony Clie 5.0
[ 10.647953] usbcore: registered new interface driver visor
[ 10.647955] visor: USB HandSpring Visor / Palm OS driver
[ 10.725372] device-mapper: uevent: version 1.0.3
[ 10.725537] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 11.555067] padlock: VIA PadLock not detected.
[ 11.576678] padlock: VIA PadLock Hash Engine not detected.
[ 24.866763] fuse init (API version 7.11)
[ 25.064183] kjournald starting. Commit interval 5 seconds
[ 25.095326] EXT3 FS on dm-2, internal journal
[ 25.095426] EXT3-fs: mounted filesystem with ordered data mode.
[ 25.180572] Adding 2931820k swap on /dev/mapper/sda5_crypt. Priority:-1 extents:1 across:2931820k
[ 25.212833] Adding 2931820k swap on /dev/mapper/sdb5_crypt. Priority:-2 extents:1 across:2931820k
[ 27.957711] tg3 0000:03:00.0: PME# disabled
[ 27.958037] tg3 0000:03:00.0: irq 29 for MSI/MSI-X
[ 28.013142] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 29.638712] tg3: eth0: Link is up at 100 Mbps, full duplex.
[ 29.638775] tg3: eth0: Flow control is on for TX and on for RX.
[ 29.638983] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 39.728380] eth0: no IPv6 routers present
[ 57.717733] lp0: using parport0 (interrupt-driven).
[ 57.724947] ppdev: user-space parallel port driver
[ 61.369277] Linux agpgart interface v0.103
[ 61.628022] nvidia: module license 'NVIDIA' taints kernel.
[ 61.628027] Disabling lock debugging due to kernel taint
[ 61.880035] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 61.880042] nvidia 0000:01:00.0: setting latency timer to 64
[ 61.880149] NVRM: loading NVIDIA UNIX x86 Kernel Module 185.18.36 Fri Aug 14 17:18:04 PDT 2009
[ 61.880642] NVRM: API mismatch: the client has the version 173.14.09, but
[ 61.880643] NVRM: this kernel module has the version 185.18.36. Please
[ 61.880645] NVRM: make sure that this kernel module and all NVIDIA driver
[ 61.880646] NVRM: components have the same version.
[ 62.913402] NVRM: API mismatch: the client has the version 173.14.09, but
[ 62.913403] NVRM: this kernel module has the version 185.18.36. Please
[ 62.913404] NVRM: make sure that this kernel module and all NVIDIA driver
[ 62.913405] NVRM: components have the same version.
[ 63.977128] NVRM: API mismatch: the client has the version 173.14.09, but
[ 63.977130] NVRM: this kernel module has the version 185.18.36. Please
[ 63.977131] NVRM: make sure that this kernel module and all NVIDIA driver
[ 63.977132] NVRM: components have the same version.
[ 65.010474] NVRM: API mismatch: the client has the version 173.14.09, but
[ 65.010476] NVRM: this kernel module has the version 185.18.36. Please
[ 65.010477] NVRM: make sure that this kernel module and all NVIDIA driver
[ 65.010478] NVRM: components have the same version.
[ 282.599396] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
** Loaded modules:
Module Size Used by
nvidia 9576396 26
agpgart 30836 1 nvidia
ppdev 6348 0
lp 8012 0
fuse 47752 1
sha256_generic 11216 0
aes_i586 8092 6
aes_generic 27436 1 aes_i586
cbc 3012 3
dm_crypt 11092 3
dm_snapshot 21604 0
dm_mirror 12580 0
dm_region_hash 10668 1 dm_mirror
dm_log 8464 2 dm_mirror,dm_region_hash
dm_mod 49992 10 dm_crypt,dm_snapshot,dm_mirror,dm_log
visor 13812 0
usbserial 27456 1 visor
coretemp 5176 0
loop 13324 0
snd_hda_codec_analog 53456 1
snd_hda_intel 22192 0
snd_hda_codec 63580 2 snd_hda_codec_analog,snd_hda_intel
snd_hwdep 6120 1 snd_hda_codec
snd_pcm_oss 32232 0
snd_mixer_oss 12368 1 snd_pcm_oss
snd_pcm 62420 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_midi 5688 0
snd_rawmidi 18596 1 snd_seq_midi
snd_seq_midi_event 6212 1 snd_seq_midi
snd_seq 42436 2 snd_seq_midi,snd_seq_midi_event
snd_timer 17436 2 snd_pcm,snd_seq
snd_seq_device 6136 3 snd_seq_midi,snd_rawmidi,snd_seq
snd 49060 11 snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 6184 1 snd
i2c_i801 8564 0
x38_edac 4040 0
snd_page_alloc 8180 2 snd_hda_intel,snd_pcm
psmouse 37528 0
edac_core 35128 1 x38_edac
i2c_core 20844 2 nvidia,i2c_i801
processor 34504 0
button 5060 0
pcspkr 2104 0
evdev 8028 6
parport_pc 22420 1
dcdbas 6736 0
parport 31144 3 ppdev,lp,parport_pc
serio_raw 4560 0
ext3 107172 2
jbd 41036 1 ext3
mbcache 6924 1 ext3
raid1 18476 2
md_mod 77780 3 raid1
sg 20296 0
sr_mod 13264 0
cdrom 30316 1 sr_mod
sd_mod 28748 8
crc_t10dif 1632 1 sd_mod
usbhid 31568 0
hid 34528 1 usbhid
ahci 30068 6
uhci_hcd 19132 0
libata 150904 1 ahci
scsi_mod 131800 4 sg,sr_mod,sd_mod,libata
tg3 91244 0
libphy 19552 1 tg3
ehci_hcd 29680 0
usbcore 126004 6 visor,usbserial,usbhid,uhci_hcd,ehci_hcd
thermal 12580 0
fan 4044 0
thermal_sys 13140 3 processor,thermal,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82X38/X48 Express DRAM Controller [8086:29e0]
Subsystem: Dell Device [1028:0214]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 82X38/X48 Express Host-Primary PCI Express Bridge [8086:29e1] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fa000000-fdefffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:06.0 PCI bridge [0604]: Intel Corporation 82X38/X48 Express Host-Secondary PCI Express Bridge [8086:29e9] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0214]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at ff20 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0214]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at ff00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0214]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at ecc0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0214]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 0: Memory at fdffbc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 02)
Subsystem: Dell Device [1028:0214]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fdffc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: f9f00000-f9ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Memory behind bridge: f9e00000-f9efffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0214]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at ff80 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0214]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at ff60 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0214]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at ff40 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0214]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at ff980800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801IR (ICH9R) LPC Interface Controller [8086:2916] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA AHCI Controller [8086:2922] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Device [1028:0214]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 28
Region 0: I/O ports at fe00 [size=8]
Region 1: I/O ports at fe10 [size=4]
Region 2: I/O ports at fe20 [size=8]
Region 3: I/O ports at fe30 [size=4]
Region 4: I/O ports at fec0 [size=32]
Region 5: Memory at ff970000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02)
Subsystem: Dell Device [1028:0214]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 20
Region 0: Memory at fdffbb00 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at ece0 [size=32]
Kernel driver in use: i801_smbus
01:00.0 VGA compatible controller [0300]: nVidia Corporation G84 [Quadro FX 570] [10de:040e] (rev a1) (prog-if 00 [VGA controller])
Subsystem: nVidia Corporation Device [10de:0474]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at dc80 [size=128]
[virtual] Expansion ROM at fde00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
03:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5721 Gigabit Ethernet PCI Express [14e4:1659] (rev 21)
Subsystem: Broadcom Corporation NetXtreme BCM5721 Gigabit Ethernet PCI Express [14e4:1659]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 29
Region 0: Memory at f9ff0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3
04:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5754 Gigabit Ethernet PCI Express [14e4:167a] (rev 02)
Subsystem: Dell Precision T3400 [1028:0214]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f9ef0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable'), (500, 'stable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.30-1-686 (SMP w/2 CPU cores)
Locale: LANG=C, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.30-1-686 depends on:
ii debconf [debconf-2.0] 1.5.27 Debian configuration management sy
ii initramfs-tools [linux-initra 0.93.4 tools for generating an initramfs
ii module-init-tools 3.10-3 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.30-1-686 recommends:
ii libc6-i686 2.9-25 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.30-1-686 suggests:
ii grub 0.97-56 GRand Unified Bootloader (dummy pa
ii grub-legacy [grub] 0.97-56 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.30 <none> (no description available)
-- debconf information:
linux-image-2.6.30-1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.30-1-686/postinst/create-kimage-link-2.6.30-1-686: true
linux-image-2.6.30-1-686/prerm/would-invalidate-boot-loader-2.6.30-1-686: true
linux-image-2.6.30-1-686/preinst/overwriting-modules-2.6.30-1-686: true
linux-image-2.6.30-1-686/postinst/old-dir-initrd-link-2.6.30-1-686: true
linux-image-2.6.30-1-686/preinst/failed-to-move-modules-2.6.30-1-686:
linux-image-2.6.30-1-686/preinst/initrd-2.6.30-1-686:
linux-image-2.6.30-1-686/prerm/removing-running-kernel-2.6.30-1-686: true
linux-image-2.6.30-1-686/postinst/kimage-is-a-directory:
linux-image-2.6.30-1-686/preinst/abort-overwrite-2.6.30-1-686:
linux-image-2.6.30-1-686/preinst/bootloader-initrd-2.6.30-1-686: true
linux-image-2.6.30-1-686/postinst/depmod-error-initrd-2.6.30-1-686: false
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.30-1-686/postinst/old-initrd-link-2.6.30-1-686: true
linux-image-2.6.30-1-686/postinst/depmod-error-2.6.30-1-686: false
linux-image-2.6.30-1-686/postinst/old-system-map-link-2.6.30-1-686: true
linux-image-2.6.30-1-686/preinst/lilo-initrd-2.6.30-1-686: true
linux-image-2.6.30-1-686/postinst/bootloader-test-error-2.6.30-1-686:
linux-image-2.6.30-1-686/preinst/abort-install-2.6.30-1-686:
linux-image-2.6.30-1-686/postinst/bootloader-error-2.6.30-1-686:
linux-image-2.6.30-1-686/preinst/elilo-initrd-2.6.30-1-686: true
--- End Message ---