Bug#589855: linux-image-2.6.32-bpo.5-amd64: p54pci doesn't work with ISL3890 based card
Package: linux-2.6
Version: 2.6.32-15~bpo50+1
Severity: important
This card worked with the original prism54 driver. The p54pci driver
causes problems. I have tried different versions of the firmware (see
the kernel log below) with the same error message: 'phyX: device does not
respond!'
As advised @ http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=497873
I am filing a new bug against 2.6.32.
Is there any workaround, except for enabling PRISM54?
-- Package-specific info:
** Version:
Linux version 2.6.32-bpo.5-amd64 (Debian 2.6.32-15~bpo50+1) (norbert@tretkowski.de) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP Fri Jun 11 08:42:31 UTC 2010
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-bpo.5-amd64 root=/dev/mapper/vg1-lvroot ro
** Not tainted
** Kernel log:
[ 14.544299] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 14.544355] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 14.544408] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 14.544456] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 14.544514] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 14.544566] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 14.544617] cfg80211: Calling CRDA for country: US
[ 14.582886] parport_pc 00:08: reported by Plug and Play ACPI
[ 14.582973] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 14.714351] alloc irq_desc for 20 on node -1
[ 14.714354] alloc kstat_irqs on node -1
[ 14.714361] p54pci 0000:03:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 14.714460] p54pci 0000:03:00.0: firmware: requesting isl3886pci
[ 15.094039] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[ 15.096509] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 15.537927] p54pci 0000:03:00.0: Cannot find firmware (isl3886pci)
[ 15.537982] p54pci 0000:03:00.0: firmware: requesting isl3886
[ 15.541913] p54pci 0000:03:00.0: PCI INT A disabled
[ 15.541972] p54pci: probe of 0000:03:00.0 failed with error -2
[ 17.040407] EXT3 FS on dm-1, internal journal
[ 17.712759] loop: module loaded
[ 19.214173] kjournald starting. Commit interval 5 seconds
[ 19.244415] EXT3 FS on md0, internal journal
[ 19.244483] EXT3-fs: mounted filesystem with ordered data mode.
[ 19.604744] kjournald starting. Commit interval 5 seconds
[ 19.644375] EXT3 FS on dm-3, internal journal
[ 19.644444] EXT3-fs: mounted filesystem with ordered data mode.
[ 20.779403] tun: Universal TUN/TAP device driver, 1.6
[ 20.779472] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 20.841492] Bridge firewalling registered
[ 20.845808] device tap10 entered promiscuous mode
[ 20.852680] device tap11 entered promiscuous mode
[ 20.855180] device eth0 entered promiscuous mode
[ 20.856311] alloc irq_desc for 26 on node -1
[ 20.856314] alloc kstat_irqs on node -1
[ 20.856327] atl1c 0000:02:00.0: irq 26 for MSI/MSI-X
[ 20.856422] atl1c 0000:02:00.0: atl1c: eth0 NIC Link is Up<1000 Mbps Full Duplex>
[ 20.858874] br0: port 3(eth0) entering learning state
[ 20.858921] br0: port 2(tap11) entering learning state
[ 20.858964] br0: port 1(tap10) entering learning state
[ 30.860011] br0: no IPv6 routers present
[ 30.864090] eth0: no IPv6 routers present
[ 30.992017] tap10: no IPv6 routers present
[ 31.644019] tap11: no IPv6 routers present
[ 35.856507] br0: port 3(eth0) entering forwarding state
[ 35.856558] br0: port 2(tap11) entering forwarding state
[ 35.856605] br0: port 1(tap10) entering forwarding state
[ 112.560011] tap0: no IPv6 routers present
[ 4094.553141] p54pci 0000:03:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 4094.553254] p54pci 0000:03:00.0: firmware: requesting isl3886pci
[ 4094.556691] p54pci 0000:03:00.0: Cannot find firmware (isl3886pci)
[ 4094.556731] p54pci 0000:03:00.0: firmware: requesting isl3886
[ 4094.560454] p54pci 0000:03:00.0: PCI INT A disabled
[ 4094.560496] p54pci: probe of 0000:03:00.0 failed with error -2
[ 4382.629133] p54pci 0000:03:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 4382.629214] p54pci 0000:03:00.0: firmware: requesting isl3886pci
[ 4382.643339] phy2: p54 detected a LM86 firmware
[ 4382.643367] p54: rx_mtu reduced from 3240 to 2376
[ 4382.643392] phy2: FW rev 2.17.2.0 - Softmac protocol 7.6
[ 4382.643418] phy2: cryptographic accelerator WEP:YES, TKIP:YES, CCMP:YES
[ 4383.752033] phy2: device does not respond!
[ 4383.752125] p54pci 0000:03:00.0: PCI INT A disabled
[ 4383.752161] p54pci: probe of 0000:03:00.0 failed with error -16
[ 4488.917054] p54pci 0000:03:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 4488.917135] p54pci 0000:03:00.0: firmware: requesting isl3886pci
[ 4488.931262] phy3: p54 detected a LM86 firmware
[ 4488.931290] p54: rx_mtu reduced from 3240 to 2376
[ 4488.931316] phy3: FW rev 2.13.22.0 - Softmac protocol 5.9
[ 4488.931342] phy3: cryptographic accelerator WEP:YES, TKIP:YES, CCMP:YES
[ 4490.036012] phy3: device does not respond!
[ 4490.036111] p54pci 0000:03:00.0: PCI INT A disabled
[ 4490.036149] p54pci: probe of 0000:03:00.0 failed with error -16
[ 4842.733163] p54pci 0000:03:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 4842.733243] p54pci 0000:03:00.0: firmware: requesting isl3886pci
[ 4842.747415] phy4: p54 detected a LM86 firmware
[ 4842.747443] p54: rx_mtu reduced from 3240 to 2376
[ 4842.747468] phy4: FW rev 2.13.12.0 - Softmac protocol 5.9
[ 4842.747495] phy4: cryptographic accelerator WEP:YES, TKIP:YES, CCMP:YES
[ 4843.852508] phy4: device does not respond!
[ 4843.852594] p54pci 0000:03:00.0: PCI INT A disabled
[ 4843.852632] p54pci: probe of 0000:03:00.0 failed with error -16
[518222.680053] usb 3-1: USB disconnect, address 2
[549189.957065] p54pci 0000:03:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[549189.957148] p54pci 0000:03:00.0: firmware: requesting isl3886pci
[549189.971151] phy5: p54 detected a LM86 firmware
[549189.971180] p54: rx_mtu reduced from 3240 to 2376
[549189.971205] phy5: FW rev 2.13.12.0 - Softmac protocol 5.9
[549189.971232] phy5: cryptographic accelerator WEP:YES, TKIP:YES, CCMP:YES
[549191.076012] phy5: device does not respond!
[549191.076111] p54pci 0000:03:00.0: PCI INT A disabled
[549191.076149] p54pci: probe of 0000:03:00.0 failed with error -16
[558584.977056] p54pci 0000:03:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[558584.977137] p54pci 0000:03:00.0: firmware: requesting isl3886pci
[558584.991180] phy6: p54 detected a LM86 firmware
[558584.991208] p54: rx_mtu reduced from 3240 to 2376
[558584.991234] phy6: FW rev 2.17.2.0 - Softmac protocol 7.6
[558584.991260] phy6: cryptographic accelerator WEP:YES, TKIP:YES, CCMP:YES
[558586.096014] phy6: device does not respond!
[558586.096101] p54pci 0000:03:00.0: PCI INT A disabled
[558586.096138] p54pci: probe of 0000:03:00.0 failed with error -16
** Model information
sys_vendor: Gigabyte Technology Co., Ltd.
product_name: G31M-ES2L
product_version:
chassis_vendor: Gigabyte Technology Co., Ltd.
chassis_version:
bios_vendor: Award Software International, Inc.
bios_version: FH
board_vendor: Gigabyte Technology Co., Ltd.
board_name: G31M-ES2L
board_version: x.x
** Loaded modules:
Module Size Used by
p54pci 7408 0
bridge 39470 0
stp 1440 1 bridge
tun 10796 6
loop 11751 0
snd_hda_codec_realtek 235506 1
p54common 20407 1 p54pci
led_class 2433 1 p54common
mac80211 136076 2 p54pci,p54common
parport_pc 18855 0
parport 27938 1 parport_pc
tpm_tis 7336 0
tpm 9917 1 tpm_tis
tpm_bios 4521 1 tpm
cfg80211 100776 2 p54common,mac80211
rfkill 12964 1 cfg80211
evdev 7352 0
i2c_i801 7830 0
pcspkr 1699 0
snd_hda_intel 19875 0
i2c_core 15680 1 i2c_i801
processor 30119 0
button 4650 0
snd_hda_codec 54244 2 snd_hda_codec_realtek,snd_hda_intel
atl1c 26108 0
snd_hwdep 5380 1 snd_hda_codec
rng_core 2990 0
snd_pcm 60471 2 snd_hda_intel,snd_hda_codec
snd_timer 15534 1 snd_pcm
snd 46414 6 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore 4598 1 snd
snd_page_alloc 6169 2 snd_hda_intel,snd_pcm
sha256_generic 8692 2
aes_x86_64 7340 2
aes_generic 25698 1 aes_x86_64
cbc 2539 1
ext3 106118 3
jbd 36861 1 ext3
mbcache 5050 1 ext3
dm_crypt 10427 1
dm_mirror 10891 0
dm_region_hash 6648 1 dm_mirror
dm_log 7381 2 dm_mirror,dm_region_hash
dm_snapshot 18449 0
dm_mod 53530 14 dm_crypt,dm_mirror,dm_log,dm_snapshot
raid456 44452 2
md_mod 73584 3 raid456
async_raid6_recov 5138 1 raid456
async_pq 3447 2 raid456,async_raid6_recov
raid6_pq 77179 2 async_raid6_recov,async_pq
async_xor 2414 3 raid456,async_raid6_recov,async_pq
xor 4380 1 async_xor
async_memcpy 1198 2 raid456,async_raid6_recov
async_tx 1702 5 raid456,async_raid6_recov,async_pq,async_xor,async_memcpy
usb_storage 39353 0
sd_mod 29697 9
crc_t10dif 1276 1 sd_mod
ata_piix 20964 6
ata_generic 2983 0
libata 133216 2 ata_piix,ata_generic
ehci_hcd 30815 0
uhci_hcd 18457 0
scsi_mod 121845 3 usb_storage,sd_mod,libata
usbcore 121751 4 usb_storage,ehci_hcd,uhci_hcd
nls_base 6361 1 usbcore
thermal 11674 0
fan 3346 0
thermal_sys 11942 3 processor,thermal,fan
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
iface eth0 inet manual
auto br0
iface br0 inet static
address 10.66.0.13
network 10.66.0.0
netmask 255.255.255.0
gateway 10.66.0.254
broadcast 10.66.1.255
bridge_ports tap10 tap11 eth0
bridge_maxwait 0
pre-up openvpn --mktun --dev tap10
pre-up openvpn --mktun --dev tap11
post-down openvpn --rmtun --dev tap10
post-down openvpn --rmtun --dev tap11
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 6c:f0:49:57:28:c4 brd ff:ff:ff:ff:ff:ff
inet6 fe80::6ef0:49ff:fe57:28c4/64 scope link
valid_lft forever preferred_lft forever
3: tap10: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 100
link/ether ca:f3:fd:c5:90:cb brd ff:ff:ff:ff:ff:ff
inet6 fe80::c8f3:fdff:fec5:90cb/64 scope link
valid_lft forever preferred_lft forever
4: tap11: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 100
link/ether 32:25:1f:6d:c9:d6 brd ff:ff:ff:ff:ff:ff
inet6 fe80::3025:1fff:fe6d:c9d6/64 scope link
valid_lft forever preferred_lft forever
5: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN
link/ether 32:25:1f:6d:c9:d6 brd ff:ff:ff:ff:ff:ff
inet 10.66.0.13/24 brd 10.66.1.255 scope global br0
inet6 fe80::3025:1fff:fe6d:c9d6/64 scope link
valid_lft forever preferred_lft forever
6: tap0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 100
link/ether de:b8:e4:0e:f1:4d brd ff:ff:ff:ff:ff:ff
inet 10.66.1.101/24 brd 10.66.1.255 scope global tap0
inet6 fe80::dcb8:e4ff:fe0e:f14d/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 21689 226 0 0 0 0 0 0 21689 226 0 0 0 0 0 0
eth0:43402313 150511 0 0 0 0 0 23843 10098754 95816 0 0 0 0 1 0
tap10: 0 0 0 0 0 0 0 0 10851293 51120 0 3 0 0 0 0
tap11: 0 0 0 0 0 0 0 0 10851293 51120 0 3 0 0 0 0
br0:41080799 150336 0 0 0 0 0 47765 9843895 95847 0 0 0 0 0 0
tap0: 309016 1572 0 0 0 0 0 0 1232324 3437 0 0 0 0 0 0
*** Protocol statistics:
Ip:
131568 total packets received
0 forwarded
0 incoming packets discarded
118540 incoming packets delivered
85159 requests sent out
14 reassemblies required
7 packets reassembled ok
Icmp:
28 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 16
echo requests: 5
echo replies: 7
29 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 17
echo request: 7
echo replies: 5
IcmpMsg:
InType0: 7
InType3: 16
InType8: 5
OutType0: 5
OutType3: 17
OutType8: 7
Tcp:
62 active connections openings
7 passive connection openings
23 failed connection attempts
17 connection resets received
1 connections established
21677 segments received
12676 segments send out
12 segments retransmited
0 bad segments received.
43 resets sent
Udp:
74182 packets received
2 packets to unknown port received.
0 packet receive errors
72462 packets sent
UdpLite:
TcpExt:
8 ICMP packets dropped because they were out-of-window
13 TCP sockets finished time wait in fast timer
168 delayed acks sent
Quick ack mode was activated 54 times
167 packets directly queued to recvmsg prequeue.
183436 bytes directly received in process context from prequeue
16285 packet headers predicted
116 packets header predicted and directly queued to user
139 acknowledgments not containing data payload received
2705 predicted acknowledgments
4 congestion windows recovered without slow start after partial ack
11 other TCP timeouts
54 DSACKs sent for old packets
10 DSACKs received
1 connections reset due to unexpected data
15 connections reset due to early user close
1 connections aborted due to timeout
TCPDSACKIgnoredOld: 4
TCPDSACKIgnoredNoUndo: 1
IpExt:
InMcastPkts: 4488
InBcastPkts: 25317
OutBcastPkts: 3198
InOctets: 39074972
OutOctets: 9305132
InMcastOctets: 125664
InBcastOctets: 5221427
OutBcastOctets: 750052
*** Device features:
br0: 0x111809
eth0: 0x110989
lo: 0x13865
tap0: 0x0
tap10: 0x0
tap11: 0x0
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 10)
Subsystem: Giga-byte Technology Device [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 82G33/G31 Express Integrated Graphics Controller [8086:29c2] (rev 10) (prog-if 00 [VGA controller])
Subsystem: Giga-byte Technology Device [1458:d000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 3
Region 0: Memory at fdf00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at ff00 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at fdc00000 (32-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
Kernel modules: i915
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 01)
Subsystem: Giga-byte Technology Device [1458:a002]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fdff8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fd900000-fd9fffff
Prefetchable memory behind bridge: 00000000fd800000-00000000fd8fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fde00000-fdefffff
Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at fe00 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at fd00 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at fc00 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at fb00 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Device [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fdfff000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fdb00000-fdbfffff
Prefetchable memory behind bridge: 00000000fda00000-00000000fdafffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01)
Subsystem: Giga-byte Technology Device [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: intel-rng, iTCO_wdt
00:1f.2 IDE interface [0101]: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller [8086:27c0] (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Giga-byte Technology Device [1458:b002]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at f800 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_generic, ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 01)
Subsystem: Giga-byte Technology GA-8I945PG-RH Mainboard [1458:5001]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
02:00.0 Ethernet controller [0200]: Attansic Technology Corp. Device [1969:1063] (rev c0)
Subsystem: Giga-byte Technology Device [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 26
Region 0: Memory at fdec0000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at bf00 [size=128]
Capabilities: <access denied>
Kernel driver in use: atl1c
Kernel modules: atl1c
03:00.0 Network controller [0280]: Intersil Corporation ISL3890 [Prism GT/Prism Duette]/ISL3886 [Prism Javelin/Prism Xbow] [1260:3890] (rev 01)
Subsystem: Standard Microsystems Corp [SMC] SMC2802W Wireless PCI Adapter [10b8:2802]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fdbfe000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel modules: p54pci
** USB devices:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 058f:6362 Alcor Micro Corp. Hi-Speed 21-in-1 Flash Card Reader/Writer (Internal/External)
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 5.0.4
APT prefers stable
APT policy: (700, 'stable'), (650, 'testing'), (600, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-bpo.5-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.32-bpo.5-amd64 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux 0.92o tools for generating an initramfs
ii linux-base 2.6.32-15~bpo50+1 Linux image base package
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-bpo.5-amd64 recommends:
ii firmware-linux-free 2.6.32-15~bpo50+1 Binary firmware for various driver
Versions of packages linux-image-2.6.32-bpo.5-amd64 suggests:
ii grub-pc [grub] 1.96+20080724-16 GRand Unified Bootloader, version
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-bpo.5-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-bpo.5-amd64/prerm/removing-running-kernel-2.6.32-bpo.5-amd64: true
linux-image-2.6.32-bpo.5-amd64/prerm/would-invalidate-boot-loader-2.6.32-bpo.5-amd64: true
linux-image-2.6.32-bpo.5-amd64/postinst/missing-firmware-2.6.32-bpo.5-amd64:
linux-image-2.6.32-bpo.5-amd64/postinst/bootloader-error-2.6.32-bpo.5-amd64:
linux-image-2.6.32-bpo.5-amd64/postinst/depmod-error-initrd-2.6.32-bpo.5-amd64: false
linux-image-2.6.32-bpo.5-amd64/postinst/bootloader-test-error-2.6.32-bpo.5-amd64:
Reply to: