Bug#589778: linux-image-2.6.32-5-686: prism2.5: hostap loads 90s

[Sten Heinze <sten.heinze@gmx.de>]

On Wednesday 21 July 2010 01:32:38 Ben Hutchings wrote:
> On Wed, 2010-07-21 at 01:04 +0200, Sten Heinze wrote:
> > Package: linux-2.6
> > Version: 2.6.32-15 and 2.6.32-17
> > Severity: minor
> > 
> > 
> > After upgrading from Lenny to Squeeze loading the hostap* modules for the
> > built-in prism2.5 wireless network card need ~90s to load (I think
> > loading is done by udev) and thus extend the boot process by this time.
> > It is quite annoying to have to wait twice as long as the boot process
> > usually takes, e.g. if the orinoco module for this card is loaded (but
> > no connection is possible with the orinoco module).
> 
> [...]
> 
> Please send the file /etc/udev/rules.d/70-persistent-net.rules from this
> system.

Attached.

Sten

# This file was automatically generated by the /lib/udev/write_net_rules
# program, probably run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single line.
# MAC addresses must be written in lowercase.

# PCI device 0x8086:0x1031 (e100)
SUBSYSTEM=="net", DRIVERS=="?*", ATTR{address}=="00:d0:59:c1:49:b3", NAME="eth1"

# PCI device 0x1260:0x3873 (orinoco_pci)
SUBSYSTEM=="net", DRIVERS=="?*", ATTR{address}=="00:20:e0:8c:d5:6a", NAME="eth0"

# PCI device 0x1260:0x3873 (orinoco_pci)
SUBSYSTEM=="net", DRIVERS=="?*", ATTR{address}=="00:20:e0:8d:ea:db", NAME="eth2"

# PCI device 0x168c:0x0013 (ath5k_pci)
SUBSYSTEM=="net", DRIVERS=="?*", ATTR{address}=="00:15:6d:10:33:bd", ATTR{type}=="1", NAME="wlan0"

# PCI device 0x1260:0x3890 (p54pci)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:09:5b:c9:5c:d3", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan1"