Bug#588433: linux-image-2.6.32-5-686: tries to run update-grub, although grub isn't installed anymore
Package: linux-2.6
Version: 2.6.32-16
Severity: normal
Hi,
today the linux-image-2.6.32-5-686 (2.6.32-16) package failed for me during the
configuration phase. When the postinst script is run manually, the following
happens:
$ sudo LANG=C /var/lib/dpkg/info/linux-image-`uname -r`.postinst configure
Running depmod.
Running update-initramfs.
update-initramfs: Generating /boot/initrd.img-2.6.32-5-686
initrd.img(/boot/initrd.img-2.6.32-5-686
) points to /boot/initrd.img-2.6.32-5-686
(/boot/initrd.img-2.6.32-5-686) -- doing nothing at /var/lib/dpkg/info/linux-
image-2.6.32-5-686.postinst line 379.
vmlinuz(/boot/vmlinuz-2.6.32-5-686
) points to /boot/vmlinuz-2.6.32-5-686
(/boot/vmlinuz-2.6.32-5-686) -- doing nothing at /var/lib/dpkg/info/linux-
image-2.6.32-5-686.postinst line 379.
Running update-grub.
User postinst hook script [update-grub] failed to execute: No such file or
directory
So it fails to start update-grub, which is expected as I have purged all grub
packages from my system and replaced it with the extlinux bootloader instead.
However, grub-pc is still set as postinst_hook in /etc/kernel-img.conf:
$ grep grub /etc/kernel-img.conf
postinst_hook = update-grub
postrm_hook = update-grub
Please note that I have never ever touched this file. It should not blindly
rely the existance of update-grub.
Cheers,
Fabian
-- Package-specific info:
** Version:
Linux version 2.6.32-5-686 (Debian 2.6.32-16) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Tue Jul 6 14:57:57 UTC 2010
** Command line:
initrd=/boot/initrd.img-2.6.32-5-686 root=UUID=e6445315-c5bf-4e2c-b011-3ed84748fd53 ro quiet BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686
** Not tainted
** Kernel log:
[ 1.267887] ehci_hcd 0000:00:0b.0: irq 19, io mem 0xf0805000
[ 1.273371] libata version 3.00 loaded.
[ 1.276165] ehci_hcd 0000:00:0b.0: USB 2.0 started, EHCI 1.00
[ 1.276207] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.276208] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.276210] usb usb1: Product: EHCI Host Controller
[ 1.276212] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 1.276213] usb usb1: SerialNumber: 0000:00:0b.0
[ 1.276533] usb usb1: configuration #1 chosen from 1 choice
[ 1.276596] hub 1-0:1.0: USB hub found
[ 1.276602] hub 1-0:1.0: 8 ports detected
[ 1.278578] ata_piix 0000:00:01.1: version 2.13
[ 1.278925] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.283457] scsi0 : ata_piix
[ 1.283803] scsi1 : ata_piix
[ 1.284000] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
[ 1.284002] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
[ 1.284297] ohci_hcd 0000:00:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.284348] ohci_hcd 0000:00:06.0: OHCI Host Controller
[ 1.284366] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 2
[ 1.284443] ohci_hcd 0000:00:06.0: irq 22, io mem 0xf0804000
[ 1.340199] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.340202] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.340203] usb usb2: Product: OHCI Host Controller
[ 1.340205] usb usb2: Manufacturer: Linux 2.6.32-5-686 ohci_hcd
[ 1.340206] usb usb2: SerialNumber: 0000:00:06.0
[ 1.340284] usb usb2: configuration #1 chosen from 1 choice
[ 1.340302] hub 2-0:1.0: USB hub found
[ 1.340360] hub 2-0:1.0: 8 ports detected
[ 1.440679] ata2.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
[ 1.440943] ata1.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
[ 1.440945] ata1.00: 16777216 sectors, multi 128: LBA
[ 1.441587] ata2.00: configured for UDMA/33
[ 1.441766] ata1.00: configured for UDMA/33
[ 1.441985] scsi 0:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
[ 1.442390] scsi 1:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
[ 1.478171] sd 0:0:0:0: [sda] 16777216 512-byte logical blocks: (8.58 GB/8.00 GiB)
[ 1.478202] sd 0:0:0:0: [sda] Write Protect is off
[ 1.478204] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.478216] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.478336] sda: sda1 sda2 <sr0: scsi3-mmc drive: 32x/32x xa/form2 tray
[ 1.481173] Uniform CD-ROM driver Revision: 3.20
[ 1.481428] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.485832] sda5 sda6 >
[ 1.493719] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.533184] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.533486] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.765793] PM: Starting manual resume from disk
[ 1.765795] PM: Resume from partition 8:5
[ 1.765796] PM: Checking hibernation image.
[ 1.765982] PM: Error -22 checking image file
[ 1.765983] PM: Resume from disk failed.
[ 1.802971] kjournald starting. Commit interval 5 seconds
[ 1.802979] EXT3-fs: mounted filesystem with ordered data mode.
[ 2.812132] udev: starting version 158
[ 3.528405] pci 0000:00:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 3.530095] vboxguest: major 0, IRQ 20, I/O port d040, MMIO at 00000000f0400000 (size 0x400000)
[ 3.530098] vboxguest: Successfully loaded version 3.2.2 (interface 0x00010004)
[ 3.530701] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 3.536741] ACPI: AC Adapter [AC] (on-line)
[ 3.539764] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 3.539767] ACPI: Power Button [PWRF]
[ 3.539896] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input3
[ 3.539898] ACPI: Sleep Button [SLPF]
[ 3.551673] parport_pc 00:05: reported by Plug and Play ACPI
[ 3.581994] piix4_smbus 0000:00:07.0: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
[ 3.592721] processor LNXCPU:00: registered as cooling_device0
[ 3.595793] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[ 4.385565] Intel ICH 0000:00:05.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 4.708109] intel8x0_measure_ac97_clock: measured 55694 usecs (9915 samples)
[ 4.708111] intel8x0: measured clock 178026 rejected
[ 5.068082] intel8x0_measure_ac97_clock: measured 55042 usecs (7739 samples)
[ 5.068084] intel8x0: measured clock 140601 rejected
[ 5.428081] intel8x0_measure_ac97_clock: measured 55880 usecs (7693 samples)
[ 5.428083] intel8x0: measured clock 137670 rejected
[ 5.428084] intel8x0: clocking to 48000
[ 6.096787] Adding 329292k swap on /dev/sda5. Priority:-1 extents:1 across:329292k
[ 6.273279] EXT3 FS on sda1, internal journal
[ 6.399830] loop: module loaded
[ 7.155785] kjournald starting. Commit interval 5 seconds
[ 7.156075] EXT3 FS on sda6, internal journal
[ 7.156078] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.182150] vboxsf: Successfully loaded version 3.2.2 (interface 0x00010004)
[ 9.483847] Bluetooth: Core ver 2.15
[ 9.492068] NET: Registered protocol family 31
[ 9.492070] Bluetooth: HCI device and connection manager initialized
[ 9.492071] Bluetooth: HCI socket layer initialized
[ 9.557754] Bluetooth: L2CAP ver 2.14
[ 9.557756] Bluetooth: L2CAP socket layer initialized
[ 9.706885] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 9.706887] Bluetooth: BNEP filters: protocol multicast
[ 9.730550] Bridge firewalling registered
[ 9.744947] eth0: link up
[ 9.911442] Bluetooth: SCO (Voice Link) ver 0.6
[ 9.911444] Bluetooth: SCO socket layer initialized
[ 12.999521] [drm] Initialized drm 1.1.0 20060810
[ 13.001043] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 13.001401] [drm] Initialized vboxvideo 1.0.0 20090303 for 0000:00:02.0 on minor 0
[ 19.825250] eth0: no IPv6 routers present
[ 1761.884014] hrtimer: interrupt took 7998187 ns
** Model information
not available
** Loaded modules:
Module Size Used by
vboxvideo 1073 1
drm 112020 2 vboxvideo
cpufreq_powersave 602 0
cpufreq_stats 1940 0
cpufreq_conservative 4018 0
cpufreq_userspace 1480 0
sco 5857 2
bridge 32987 0
stp 996 1 bridge
bnep 7444 2
l2cap 21705 3 bnep
crc16 1027 1 l2cap
bluetooth 36327 5 sco,bnep,l2cap
rfkill 10264 3 bluetooth
vboxsf 25952 1
loop 9757 0
snd_intel8x0 19523 0
snd_ac97_codec 79148 1 snd_intel8x0
ac97_bus 710 1 snd_ac97_codec
snd_pcm_oss 28671 0
snd_mixer_oss 10461 1 snd_pcm_oss
snd_pcm 47214 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_seq_midi 3576 0
snd_rawmidi 12505 1 snd_seq_midi
snd_seq_midi_event 3684 1 snd_seq_midi
snd_seq 35463 2 snd_seq_midi,snd_seq_midi_event
snd_timer 12258 2 snd_pcm,snd_seq
snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq
snd 34363 9 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
i2c_piix4 7076 0
soundcore 3450 1 snd
parport_pc 15799 0
processor 26599 0
button 3598 0
evdev 5609 7
ac 1640 0
parport 22554 1 parport_pc
pcspkr 1207 0
i2c_core 12696 2 drm,i2c_piix4
snd_page_alloc 5045 2 snd_intel8x0,snd_pcm
psmouse 44657 0
vboxguest 97409 7 vboxsf
serio_raw 2916 0
ext3 94204 2
jbd 32169 1 ext3
mbcache 3762 1 ext3
sg 15968 0
sr_mod 10770 0
cdrom 26487 1 sr_mod
sd_mod 25869 4
crc_t10dif 1012 1 sd_mod
ata_generic 2019 0
ohci_hcd 16880 0
ata_piix 17640 3
ehci_hcd 27851 0
thermal 9206 0
libata 115721 2 ata_generic,ata_piix
floppy 40923 0
thermal_sys 9378 2 processor,thermal
pcnet32 22226 0
mii 2714 1 pcnet32
usbcore 98402 3 ohci_hcd,ehci_hcd
nls_base 4541 2 vboxsf,usbcore
scsi_mod 101401 4 sg,sr_mod,sd_mod,libata
** Network interface configuration:
auto lo
iface lo inet loopback
** Network status:
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 1104 8 0 0 0 0 0 0 1104 8 0 0 0 0 0 0
eth0: 25950 106 0 0 0 0 0 0 15607 142 0 0 0 0 0 0
pan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
72 total packets received
2 with invalid addresses
0 forwarded
0 incoming packets discarded
70 incoming packets delivered
131 requests sent out
32 dropped because of missing route
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
5 active connections openings
0 passive connection openings
0 failed connection attempts
0 connection resets received
0 connections established
39 segments received
38 segments send out
0 segments retransmited
0 bad segments received.
1 resets sent
Udp:
31 packets received
0 packets to unknown port received.
0 packet receive errors
91 packets sent
UdpLite:
TcpExt:
2 delayed acks sent
14 packet headers predicted
5 acknowledgments not containing data payload received
5 predicted acknowledgments
IpExt:
InMcastPkts: 9
OutMcastPkts: 11
InOctets: 25693
OutOctets: 11232
InMcastOctets: 2469
OutMcastOctets: 2549
*** Device features:
eth0: 0x0
lo: 0x13865
pan0: 0xff3865
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 440FX - 82441FX PMC [Natoma] [8086:1237] (rev 02)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:01.0 ISA bridge [0601]: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] [8086:7000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] (rev 01) (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at d000 [size=16]
Kernel driver in use: ata_piix
00:02.0 VGA compatible controller [0300]: InnoTek Systemberatung GmbH VirtualBox Graphics Adapter [80ee:beef] (prog-if 00 [VGA controller])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 18
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=32M]
Expansion ROM at <unassigned> [disabled]
00:03.0 Ethernet controller [0200]: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] [1022:2000] (rev 10)
Subsystem: Advanced Micro Devices [AMD] PCnet - Fast 79C971 [1022:2000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1500ns min, 63750ns max)
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at d020 [size=32]
Region 1: Memory at f0000000 (32-bit, non-prefetchable) [size=4K]
Region 2: Memory at f0080000 (32-bit, non-prefetchable) [size=512K]
Kernel driver in use: pcnet32
00:04.0 System peripheral [0880]: InnoTek Systemberatung GmbH VirtualBox Guest Service [80ee:cafe]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at d040 [size=32]
Region 1: Memory at f0400000 (32-bit, non-prefetchable) [size=4M]
Region 2: Memory at f0800000 (32-bit, prefetchable) [size=16K]
00:05.0 Multimedia audio controller [0401]: Intel Corporation 82801AA AC'97 Audio Controller [8086:2415] (rev 01)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at d100 [size=256]
Region 1: I/O ports at d200 [size=64]
Kernel driver in use: Intel ICH
00:06.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid USB [106b:003f] (prog-if 10 [OHCI])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 22
Region 0: Memory at f0804000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:07.0 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 08)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin ? routed to IRQ 9
00:0b.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (prog-if 20 [EHCI])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f0805000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ehci_hcd
** USB devices:
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (501, 'unstable'), (101, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/1 CPU core)
Locale: LANG=de_DE.utf8, LC_CTYPE=de_DE.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-686 depends on:
ii debconf [debconf-2.0] 1.5.32 Debian configuration management sy
ii initramfs-tools [linux-initra 0.97.2 tools for generating an initramfs
ii linux-base 2.6.32-16 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-686 recommends:
ii firmware-linux-free 2.6.32-16 Binary firmware for various driver
ii libc6-i686 2.11.2-2 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.32-5-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
ii firmware-linux-nonfree 0.26 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: true
linux-image-2.6.32-5-686/prerm/would-invalidate-boot-loader-2.6.32-5-686: true
linux-image-2.6.32-5-686/postinst/bootloader-test-error-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/bootloader-error-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false
linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686:
Reply to: