Bug#587703: linux-image-2.6-686: System hangs at boot with PCIE Mini WiFi card attached
Package: linux-image-2.6-686
Version: 2.6.32+27
Severity: critical
Tags: upstream
Justification: breaks the whole system (system unbootable)
Whenever I attach a PCI-E mini Intel 5300 Wifi card to my system,
the Debian kernel 2.6.32 hangs at boot with the following error messages:
[ 1.045815] ACPI Error: No handler or method for GPE[10], disabling event (2)
[ 1.049798] ACPI Error: No handler or method for GPE[11], disabling event (2)
[ 1.049798] ACPI Error: No handler or method for GPE[12], disabling event (2)
[ 1.049798] ACPI Error: No handler or method for GPE[13], disabling event (2)
[ 1.049798] ACPI Error: No handler or method for GPE[14], disabling event (2)
[ 1.049798] ACPI Error: No handler or method for GPE[15], disabling event (2)
[ 1.049798] ACPI Error: No handler or method for GPE[16], disabling event (2)
[ 1.049798] ACPI Error: No handler or method for GPE[17], disabling event (2)
Following is the entire dmesg log that I have been able to caputure using serial console (console=ttyS0,115200n8):
***************************************************************************
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-15) (ben@decadent.org.0
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c400 (usable)
[ 0.000000] BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003d5db400 (usable)
[ 0.000000] BIOS-e820: 000000003d5db400 - 000000003d5dfc00 (ACPI data)
[ 0.000000] BIOS-e820: 000000003d5dfc00 - 000000003d5e0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003d5e0000 - 000000003de00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.1 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around .
[ 0.000000] last_pfn = 0x3d5db max_arch_pfn = 0x100000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
[ 0.000000] RAMDISK: 377de000 - 37fef3a5
[ 0.000000] Allocated new RAMDISK: 00100000 - 009113a5
[ 0.000000] Move RAMDISK from 00000000377de000 - 0000000037fef3a4 to 00100004
[ 0.000000] ACPI: RSDP 000fa140 00024 (v02 PTECH )
[ 0.000000] ACPI: XSDT 3d5db67d 00044 (v01 PTECH OEM00001 00000001 MSFT 0FE)
[ 0.000000] ACPI: FACP 3d5db400 000F4 (v04 PTECH OEM00001 00000001 MSFT 0FE)
[ 0.000000] ACPI: DSDT 3d5db6c1 04208 (v01 PTECH DSDT0001 00000001 MSFT 020)
[ 0.000000] ACPI: FACS 3d5dfc00 00040
[ 0.000000] ACPI: SLIC 3d5db5a1 00024 (v01 PTECH SLIC 00000001 MSFT 020)
[ 0.000000] ACPI: APIC 3d5db5c5 0005C (v02 PTECH OEM00001 00000001 MSFT 0FE)
[ 0.000000] ACPI: BOOT 3d5db621 00028 (v01 PTECH OEM00001 00000001 MSFT 0FE)
[ 0.000000] 97MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 0 - 373fe000
[ 0.000000] node 0 low ram: 00000000 - 373fe000
[ 0.000000] node 0 bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 ]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 ]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 ]
[ 0.000000] #3 [0001000000 - 00014c3154] TEXT DATA BSS ==> [0001000000 ]
[ 0.000000] #4 [000009c400 - 0000100000] BIOS reserved ==> [000009c400 ]
[ 0.000000] #5 [00014c4000 - 00014ca173] BRK ==> [00014c4000 ]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 ]
[ 0.000000] #7 [0000100000 - 00009113a5] NEW RAMDISK ==> [0000100000 ]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 ]
[ 0.000000] found SMP MP-table at [c009c490] 9c490
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0003d5db
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009c
[ 0.000000] 0: 0x00000100 -> 0x0003d5db
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 3de00000 (gap: 3de00000:a22)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2000000 s34136 r0 d23208 u2097152
[ 0.000000] pcpu-alloc: s34136 r0 d23208 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pa5
[ 0.000000] Kernel command line: root=/dev/sda7 ro vga=791 console=ttyS0,1158
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Initializing HighMem for node 0 (000373fe:0003d5db)
[ 0.000000] Memory: 982456k/1005420k available (2490k kernel code, 22000k re)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.000000] .init : 0xc13b9000 - 0xc1416000 ( 372 kB)
[ 0.000000] .data : 0xc126e965 - 0xc13b81e0 (1318 kB)
[ 0.000000] .text : 0xc1000000 - 0xc126e965 (2490 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, 1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2266.625 MHz processor.
[ 0.012003] Calibrating delay loop (skipped), value calculated using timer f)
[ 0.020010] Security Framework initialized
[ 0.024004] SELinux: Disabled at boot.
[ 0.028006] Mount-cache hash table entries: 512
[ 0.032086] Initializing cgroup subsys ns
[ 0.036004] Initializing cgroup subsys cpuacct
[ 0.040005] Initializing cgroup subsys devices
[ 0.044003] Initializing cgroup subsys freezer
[ 0.048003] Initializing cgroup subsys net_cls
[ 0.052017] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.060003] CPU: L2 cache: 3072K
[ 0.063210] CPU: Physical Processor ID: 0
[ 0.064003] CPU: Processor Core ID: 0
[ 0.068005] mce: CPU supports 6 MCE banks
[ 0.072007] CPU0: Thermal monitoring enabled (TM1)
[ 0.076004] using mwait in idle threads.
[ 0.080005] Performance Events: Core2 events, Intel PMU driver.
[ 0.085654] ... version: 2
[ 0.088003] ... bit width: 40
[ 0.092003] ... generic registers: 2
[ 0.096003] ... value mask: 000000ffffffffff
[ 0.100003] ... max period: 000000007fffffff
[ 0.104003] ... fixed-purpose events: 3
[ 0.108003] ... event mask: 0000000700000003
[ 0.112005] Checking 'hlt' instruction... OK.
[ 0.133501] ACPI: Core revision 20090903
[ 0.141944] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.144313] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.189308] CPU0: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping 0a
[ 0.200001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.016000] Initializing CPU#1
[ 0.016000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.016000] CPU: L2 cache: 3072K
[ 0.016000] CPU: Physical Processor ID: 0
[ 0.016000] CPU: Processor Core ID: 1
[ 0.016000] CPU1: Thermal monitoring enabled (TM1)
[ 0.300051] CPU1: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping 0a
[ 0.309228] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.312039] Brought up 2 CPUs
[ 0.316004] Total of 2 processors activated (9066.99 BogoMIPS).
[ 0.320650] devtmpfs: initialized
[ 0.324171] regulator: core version 0.5
[ 0.328038] NET: Registered protocol family 16
[ 0.332067] ACPI: bus type pci registered
[ 0.336294] PCI: PCI BIOS revision 2.10 entry at 0xff601, last bus=5
[ 0.340002] PCI: Using configuration type 1 for base access
[ 0.344243] bio: create slab <bio-0> at 0
[ 0.354510] ACPI: SSDT 3d5db4f4 000AD (v01 PTECH Legacy 00000001 MSFT 020)
[ 0.360351] ACPI: Interpreter enabled
[ 0.364008] ACPI: (supports S0 S1)
[ 0.368552] ACPI: Using IOAPIC for interrupt routing
[ 0.376936] ACPI: No dock devices found.
[ 0.380030] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.384044] DMAR: Forcing write-buffer flush capability
[ 0.392057] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.396005] pci 0000:00:1a.7: PME# disabled
[ 0.400077] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.404004] pci 0000:00:1b.0: PME# disabled
[ 0.408056] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.412004] pci 0000:00:1c.0: PME# disabled
[ 0.416058] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.420005] pci 0000:00:1c.1: PME# disabled
[ 0.424059] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.428004] pci 0000:00:1c.3: PME# disabled
[ 0.432058] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.436004] pci 0000:00:1c.4: PME# disabled
[ 0.444057] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.448005] pci 0000:00:1d.7: PME# disabled
[ 0.452507] pci 0000:02:00.0: PME# supported from D0 D3hot
[ 0.456007] pci 0000:02:00.0: PME# disabled
[ 0.468286] pci 0000:03:00.0: PME# supported from D0 D3hot
[ 0.472007] pci 0000:03:00.0: PME# disabled
[ 0.484270] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.488007] pci 0000:04:00.0: PME# disabled
[ 0.500155] pci 0000:00:1e.0: transparent bridge
[ 0.508814] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 *11)
[ 0.513124] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 *11)
[ 0.520088] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *11)
[ 0.525117] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 11)
[ 0.529117] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 *9 11)
[ 0.533125] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 *9 11)
[ 0.537089] ACPI: PCI Interrupt Link [LNKG] (IRQs *9)
[ 0.544500] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 *9 11)
[ 0.549081] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mee
[ 0.552012] vgaarb: loaded
[ 0.556047] PCI: Using ACPI for IRQ routing
[ 0.560149] Switching to clocksource tsc
[ 0.565100] pnp: PnP ACPI init
[ 0.568152] ACPI: bus type pnp registered
[ 0.572917] pnp: PnP ACPI: found 9 devices
[ 0.576999] ACPI: ACPI bus type pnp unregistered
[ 0.581601] PnPBIOS: Disabled by ACPI PNP
[ 0.620381] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[ 0.626283] pci 0000:00:1c.0: IO window: disabled
[ 0.631146] pci 0000:00:1c.0: MEM window: disabled
[ 0.636093] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.641475] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[ 0.647376] pci 0000:00:1c.1: IO window: 0xf000-0xffff
[ 0.652671] pci 0000:00:1c.1: MEM window: 0xdff00000-0xdfffffff
[ 0.658745] pci 0000:00:1c.1: PREFETCH window: 0x00000040000000-0x00000040f
[ 0.666312] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03
[ 0.672212] pci 0000:00:1c.3: IO window: 0xe000-0xefff
[ 0.677507] pci 0000:00:1c.3: MEM window: 0xdfe00000-0xdfefffff
[ 0.683595] pci 0000:00:1c.3: PREFETCH window: 0x00000040200000-0x00000040f
[ 0.691142] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:04
[ 0.697041] pci 0000:00:1c.4: IO window: 0x1000-0x1fff
[ 0.702335] pci 0000:00:1c.4: MEM window: 0xdfd00000-0xdfdfffff
[ 0.708409] pci 0000:00:1c.4: PREFETCH window: 0x00000040400000-0x00000040f
[ 0.715956] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.721855] pci 0000:00:1e.0: IO window: disabled
[ 0.726718] pci 0000:00:1e.0: MEM window: disabled
[ 0.731666] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.737056] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.743874] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.750561] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.757248] pci 0000:00:1c.4: enabling device (0006 -> 0007)
[ 0.762888] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.769627] NET: Registered protocol family 2
[ 0.774028] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.781351] TCP established hash table entries: 131072 (order: 8, 1048576 by)
[ 0.789032] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.795770] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.802360] TCP reno registered
[ 0.805539] NET: Registered protocol family 1
[ 0.810034] Unpacking initramfs...
[ 1.021913] Freeing initrd memory: 8260k freed
[ 1.030143] Simple Boot Flag at 0x34 set to 0x1
[ 1.034936] audit: initializing netlink socket (disabled)
[ 1.040327] type=2000 audit(1277754996.040:1): initialized
[ 1.045815] ACPI Error: No handler or method for GPE[10], disabling event (2)
[ 1.049798] ACPI Error: No handler or method for GPE[11], disabling event (2)
[ 1.049798] ACPI Error: No handler or method for GPE[12], disabling event (2)
[ 1.049798] ACPI Error: No handler or method for GPE[13], disabling event (2)
[ 1.049798] ACPI Error: No handler or method for GPE[14], disabling event (2)
[ 1.049798] ACPI Error: No handler or method for GPE[15], disabling event (2)
[ 1.049798] ACPI Error: No handler or method for GPE[16], disabling event (2)
[ 1.049798] ACPI Error: No handler or method for GPE[17], disabling event (2)
[ 1.115398] highmem bounce pool size: 64 pages
[ 1.119865] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.127357] VFS: Disk quotas dquot_6.5.2
[ 1.131311] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.137887] msgmni has been set to 1740
[ 1.141862] alg: No test for stdrng (krng)
[ 1.145981] Block layer SCSI generic (bsg) driver version 0.4 loaded (major )
[ 1.153353] io scheduler noop registered
[ 1.157263] io scheduler anticipatory registered
[ 1.161863] io scheduler deadline registered
[ 1.166144] io scheduler cfq registered (default)
[ 1.171421] vesafb: framebuffer at 0xc0000000, mapped to 0xf7c80000, using 3k
[ 1.180005] vesafb: mode is 1024x768x16, linelength=2048, pages=20
[ 1.186163] vesafb: scrolling: redraw
[ 1.189813] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 1.207669] Console: switching to colour frame buffer device 128x48
[ 1.226024] fb0: VESA VGA frame buffer device
[ 1.230398] isapnp: Scanning for PnP cards...
[ 1.420083] ACPI Error: No handler or method for GPE[19], disabling event (2)
[ 1.422878] ACPI Error: No handler or method for GPE[1A], disabling event (2)
[ 1.422878] ACPI Error: No handler or method for GPE[1B], disabling event (2)
[ 1.422878] ACPI Error: No handler or method for GPE[1D], disabling event (2)
[ 1.422878] ACPI Error: No handler or method for GPE[1E], disabling event (2)
[ 1.590146] isapnp: No Plug & Play device found
[ 1.595676] Linux agpgart interface v0.103
[ 1.599826] agpgart-intel 0000:00:00.0: Intel Mobile Intel�® GM45 Express Cht
[ 1.608243] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
[ 1.634925] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 1.641759] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.648103] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.654187] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.660423] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 ir2
[ 1.670505] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.675468] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.680579] mice: PS/2 mouse device common for all mice
[ 1.685827] ACPI Error: Could not disable RealTimeClock events (20090903/evx)
[ 1.694216] rtc_cmos 00:06: RTC can wake from S4
[ 1.698858] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.705101] rtc0: alarms up to one day, 242 bytes nvram
[ 1.710315] cpuidle: using governor ladder
[ 1.714398] cpuidle: using governor menu
[ 1.1]
***************************************************************************
and the system hangs abruptly everytime with the above messages.
The problem only happens with version 2.6.32 and onwards. The Debian kernel
2.6.30 boots fine and the Wifi card also works. I have verified that it works
with 2.6.31 kernel also. It seems that some ACPI/power managment code got
changed going from 2.6.31 to 2.6.32 which causes the system to hang.
Also I have been able to reproduce this failure with a vanilla kernel
also i.e.:
2.6.30, 2.6.31 - Boots fine with Wifi card attached
2.6.32, 2.6.33 and 2.6.34 - Hangs at boot with Wifi card attached
Since "squeeze" might ship with 2.6.32 kernel I thought I would get this bug
report in before it is finalized.
Please let me know if you want any other kind of logs or if you would like me
to do some additional testing.
Thanks
Kushal Koolwal
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.30-2-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6-686 depends on:
ii linux-image-2.6.32-5-686 2.6.32-15 Linux 2.6.32 for modern PCs
linux-image-2.6-686 recommends no packages.
linux-image-2.6-686 suggests no packages.
-- no debconf information
Reply to: