Your message dated Fri, 25 Jun 2010 02:44:07 +0100 with message-id <1277430247.26161.217.camel@localhost> and subject line Re: Bug#583482: linux-image-2.6.32: please apply patch for the intel hda regression has caused the Debian Bug report #583482, regarding linux-image-2.6.32: please apply patch for the intel hda regression to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 583482: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=583482 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.32: please apply patch for the intel hda regression
- From: Pedro Celestino dos Reis Rodrigues <reis@fc.ul.pt>
- Date: Thu, 27 May 2010 09:09:58 +0100
- Message-id: <201005270909.58836.reis@fc.ul.pt>
Package: linux-2.6 Version: 2.6.32-9 Severity: important File: linux-image-2.6.32 Tags: squeeze A patch for a kernel bug that eats 25% of the cpu resources in machines with hda intel is available http://marc.info/?l=linux- kernel&m=126177838017002&w=4 and is applied to the mainline kernel 2.6.34 As I know, version 2.6.32 will be in squeeze at release time and is affected by this bug, please apply the patch to it. -- Package-specific info: ** Version: Linux version 2.6.32-3-686 (Debian 2.6.32-9) (maks@debian.org) (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Thu Feb 25 06:14:20 UTC 2010 ** Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-3-686 root=UUID=2f835e28-115a-4a19-9868-936d2fea1d5b ro quiet ** Tainted: P (1) * Proprietary module has been loaded. ** Kernel log: [21848.811398] scsi23 : SCSI emulation for USB Mass Storage devices [21848.811728] usb-storage: device found at 8 [21848.811733] usb-storage: waiting for device to settle before scanning [21849.928170] usb 4-3: new full speed USB device using ohci_hcd and address 31 [21850.112593] usb 4-3: device descriptor read/64, error -62 [21850.400067] usb 4-3: device descriptor read/64, error -62 [21850.680151] usb 4-3: new full speed USB device using ohci_hcd and address 32 [21850.860141] usb 4-3: device descriptor read/64, error -62 [21851.144092] usb 4-3: device descriptor read/64, error -62 [21851.424151] usb 4-3: new full speed USB device using ohci_hcd and address 33 [21851.832138] usb 4-3: device not accepting address 33, error -62 [21852.008190] usb 4-3: new full speed USB device using ohci_hcd and address 34 [21852.416134] usb 4-3: device not accepting address 34, error -62 [21852.416181] hub 4-0:1.0: unable to enumerate USB device on port 3 [21852.684158] usb 4-3: new full speed USB device using ohci_hcd and address 35 [21852.868082] usb 4-3: device descriptor read/64, error -62 [21853.156576] usb 4-3: device descriptor read/64, error -62 [21853.436674] usb 4-3: new full speed USB device using ohci_hcd and address 36 [21853.620092] usb 4-3: device descriptor read/64, error -62 [21853.839453] usb-storage: device scan complete [21853.904178] usb 4-3: device descriptor read/64, error -62 [21854.240679] usb 4-3: new full speed USB device using ohci_hcd and address 37 [21854.648130] usb 4-3: device not accepting address 37, error -62 [21854.824157] usb 4-3: new full speed USB device using ohci_hcd and address 38 [21855.232090] usb 4-3: device not accepting address 38, error -62 [21855.232143] hub 4-0:1.0: unable to enumerate USB device on port 3 [21855.232307] usb 2-1: USB disconnect, address 8 [21855.500095] usb 4-3: new full speed USB device using ohci_hcd and address 39 [21855.680077] usb 4-3: device descriptor read/64, error -62 [21855.964144] usb 4-3: device descriptor read/64, error -62 [21856.244104] usb 4-3: new full speed USB device using ohci_hcd and address 40 [21856.424084] usb 4-3: device descriptor read/64, error -62 [21856.708147] usb 4-3: device descriptor read/64, error -62 [21856.988085] usb 4-3: new full speed USB device using ohci_hcd and address 41 [21857.396128] usb 4-3: device not accepting address 41, error -62 [21857.572151] usb 4-3: new full speed USB device using ohci_hcd and address 42 [21857.980079] usb 4-3: device not accepting address 42, error -62 [21857.980136] hub 4-0:1.0: unable to enumerate USB device on port 3 [21858.248157] usb 4-3: new full speed USB device using ohci_hcd and address 43 [21858.432142] usb 4-3: device descriptor read/64, error -62 [21858.716074] usb 4-3: device descriptor read/64, error -62 [21858.996128] usb 4-3: new full speed USB device using ohci_hcd and address 44 [21859.176093] usb 4-3: device descriptor read/64, error -62 [21859.460153] usb 4-3: device descriptor read/64, error -62 [21859.740153] usb 4-3: new full speed USB device using ohci_hcd and address 45 [21860.148080] usb 4-3: device not accepting address 45, error -62 [21860.324096] usb 4-3: new full speed USB device using ohci_hcd and address 46 [21860.732078] usb 4-3: device not accepting address 46, error -62 [21860.732113] hub 4-0:1.0: unable to enumerate USB device on port 3 [21860.972052] usb 2-1: new high speed USB device using ehci_hcd and address 9 [21861.117372] usb 2-1: New USB device found, idVendor=12d1, idProduct=140c [21861.117384] usb 2-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [21861.117394] usb 2-1: Product: HUAWEI Mobile [21861.117401] usb 2-1: Manufacturer: HUAWEI Technology [21861.117677] usb 2-1: configuration #1 chosen from 1 choice [21861.128191] option 2-1:1.0: GSM modem (1-port) converter detected [21861.128625] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0 [21861.136194] option 2-1:1.1: GSM modem (1-port) converter detected [21861.136486] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1 [21861.140658] option 2-1:1.2: GSM modem (1-port) converter detected [21861.140921] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2 [21861.144618] option 2-1:1.3: GSM modem (1-port) converter detected [21861.144852] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB3 [21861.155454] scsi28 : SCSI emulation for USB Mass Storage devices [21861.156680] usb-storage: device found at 9 [21861.156687] usb-storage: waiting for device to settle before scanning [21861.158599] scsi29 : SCSI emulation for USB Mass Storage devices [21861.163046] usb-storage: device found at 9 [21861.163054] usb-storage: waiting for device to settle before scanning [21861.340084] usb 4-3: new full speed USB device using ohci_hcd and address 47 [21861.524095] usb 4-3: device descriptor read/64, error -62 [21861.812285] usb 4-3: device descriptor read/64, error -62 [21862.092059] usb 4-3: new full speed USB device using ohci_hcd and address 48 [21862.272108] usb 4-3: device descriptor read/64, error -62 [21862.556103] usb 4-3: device descriptor read/64, error -62 [21862.836099] usb 4-3: new full speed USB device using ohci_hcd and address 49 [21863.244076] usb 4-3: device not accepting address 49, error -62 [21863.420095] usb 4-3: new full speed USB device using ohci_hcd and address 50 [21863.828084] usb 4-3: device not accepting address 50, error -62 [21863.828132] hub 4-0:1.0: unable to enumerate USB device on port 3 [21864.096111] usb 4-3: new full speed USB device using ohci_hcd and address 51 [21864.280094] usb 4-3: device descriptor read/64, error -62 [21864.564065] usb 4-3: device descriptor read/64, error -62 [21864.844088] usb 4-3: new full speed USB device using ohci_hcd and address 52 [21865.024122] usb 4-3: device descriptor read/64, error -62 [21865.312094] usb 4-3: device descriptor read/64, error -62 [21865.592085] usb 4-3: new full speed USB device using ohci_hcd and address 53 [21866.000086] usb 4-3: device not accepting address 53, error -62 [21866.160914] usb-storage: device scan complete [21866.162732] scsi 28:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [21866.169513] usb-storage: device scan complete [21866.172634] scsi 29:0:0:0: Direct-Access HUAWEI MMC Storage 2.31 PQ: 0 ANSI: 2 [21866.176165] usb 4-3: new full speed USB device using ohci_hcd and address 54 [21866.192186] sr0: scsi-1 drive [21866.192566] sr 28:0:0:0: Attached scsi CD-ROM sr0 [21866.192803] sr 28:0:0:0: Attached scsi generic sg1 type 5 [21866.193376] sd 29:0:0:0: Attached scsi generic sg2 type 0 [21866.221077] sd 29:0:0:0: [sdb] Attached SCSI removable disk [21866.584090] usb 4-3: device not accepting address 54, error -62 [21866.584125] hub 4-0:1.0: unable to enumerate USB device on port 3 ** Model information not available ** Loaded modules: Module Size Used by cpufreq_stats 1940 0 ppp_deflate 2790 0 zlib_deflate 15822 1 ppp_deflate bsd_comp 4120 0 ppp_async 5305 1 crc_ccitt 1039 1 ppp_async ppp_generic 16359 7 ppp_deflate,bsd_comp,ppp_async slhc 3691 1 ppp_generic sg 15964 0 sr_mod 10770 0 cdrom 26487 1 sr_mod option 13211 1 usbserial 21843 4 option usb_storage 29805 0 sco 5837 0 bridge 32983 0 stp 996 1 bridge bnep 7444 0 rfcomm 25131 0 l2cap 21677 4 bnep,rfcomm fuse 43750 1 loop 9753 0 snd_hda_codec_nvhdmi 2567 1 snd_hda_codec_idt 35245 1 snd_hda_intel 16427 5 snd_hda_codec 46002 3 snd_hda_codec_nvhdmi,snd_hda_codec_idt,snd_hda_intel arc4 974 2 snd_hwdep 4054 1 snd_hda_codec ecb 1405 2 snd_pcm_oss 28671 0 snd_mixer_oss 10461 1 snd_pcm_oss b43 132479 0 snd_pcm 47362 4 snd_hda_intel,snd_hda_codec,snd_pcm_oss rng_core 2178 1 b43 snd_seq_midi 3576 0 snd_rawmidi 12505 1 snd_seq_midi mac80211 122750 1 b43 snd_seq_midi_event 3684 1 snd_seq_midi nvidia 9820792 40 snd_seq 35459 2 snd_seq_midi,snd_seq_midi_event btusb 7997 0 cfg80211 87581 2 b43,mac80211 uvcvideo 45194 0 bluetooth 36327 5 sco,bnep,rfcomm,l2cap,btusb snd_timer 12258 3 snd_pcm,snd_seq videodev 25541 1 uvcvideo v4l1_compat 10250 2 uvcvideo,videodev snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq rfkill 10260 2 cfg80211,bluetooth agpgart 19516 1 nvidia snd 34363 19 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device shpchp 21220 0 i2c_nforce2 4464 0 video 14605 0 soundcore 3450 1 snd psmouse 44413 0 i2c_core 12648 3 nvidia,videodev,i2c_nforce2 output 1204 1 video led_class 1757 1 b43 pci_hotplug 18065 1 shpchp wmi 3575 0 battery 3782 0 snd_page_alloc 5041 2 snd_hda_intel,snd_pcm serio_raw 2916 0 pcspkr 1207 0 evdev 5609 21 ac 1640 0 button 3598 0 processor 26571 2 ext4 254909 1 mbcache 3762 1 ext4 jbd2 56059 1 ext4 crc16 1027 2 l2cap,ext4 sd_mod 25781 3 crc_t10dif 1012 1 sd_mod ohci_hcd 16904 0 ssb 33443 1 b43 ahci 26966 2 mmc_core 38491 2 b43,ssb libata 114408 1 ahci pcmcia 17442 2 b43,ssb thermal 9206 0 forcedeth 40773 0 pcmcia_core 20446 3 b43,ssb,pcmcia ehci_hcd 27574 0 scsi_mod 101297 5 sg,sr_mod,usb_storage,sd_mod,libata usbcore 98126 8 option,usbserial,usb_storage,btusb,uvcvideo,ohci_hcd,ehci_hcd nls_base 4541 1 usbcore thermal_sys 9378 3 video,processor,thermal ** PCI devices: 00:00.0 Host bridge [0600]: nVidia Corporation MCP79 Host Bridge [10de:0a82] (rev b1) Subsystem: Hewlett-Packard Company Device [103c:3651] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:00.1 RAM memory [0500]: nVidia Corporation MCP79 Memory Controller [10de:0a88] (rev b1) Subsystem: Hewlett-Packard Company Device [103c:3651] Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:03.0 ISA bridge [0601]: nVidia Corporation MCP79 LPC Bridge [10de:0aae] (rev b3) Subsystem: Hewlett-Packard Company Device [103c:3651] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:03.1 RAM memory [0500]: nVidia Corporation MCP79 Memory Controller [10de:0aa4] (rev b1) Subsystem: Hewlett-Packard Company Device [103c:3651] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:03.2 SMBus [0c05]: nVidia Corporation MCP79 SMBus [10de:0aa2] (rev b1) Subsystem: Hewlett-Packard Company Device [103c:3651] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at 3080 [size=64] Region 4: I/O ports at 3040 [size=64] Region 5: I/O ports at 3000 [size=64] Capabilities: <access denied> Kernel driver in use: nForce2_smbus 00:03.3 RAM memory [0500]: nVidia Corporation MCP79 Memory Controller [10de:0a89] (rev b1) Subsystem: Hewlett-Packard Company Device [103c:3651] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:03.5 Co-processor [0b40]: nVidia Corporation MCP79 Co-processor [10de:0aa3] (rev b1) Subsystem: Hewlett-Packard Company Device [103c:3651] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 21 Region 0: Memory at feb80000 (32-bit, non-prefetchable) [size=512K] Kernel driver in use: nvidia 00:04.0 USB Controller [0c03]: nVidia Corporation MCP79 OHCI USB 1.1 Controller [10de:0aa5] (rev b1) (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company Device [103c:3651] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 23 Region 0: Memory at 53108000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ohci_hcd 00:04.1 USB Controller [0c03]: nVidia Corporation MCP79 EHCI USB 2.0 Controller [10de:0aa6] (rev b1) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device [103c:3651] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 23 Region 0: Memory at 53109200 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:06.0 USB Controller [0c03]: nVidia Corporation MCP79 OHCI USB 1.1 Controller [10de:0aa7] (rev b1) (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company Device [103c:3651] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 22 Region 0: Memory at 53107000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ohci_hcd 00:06.1 USB Controller [0c03]: nVidia Corporation MCP79 EHCI USB 2.0 Controller [10de:0aa9] (rev b1) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device [103c:3651] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 22 Region 0: Memory at 53109100 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:08.0 Audio device [0403]: nVidia Corporation MCP79 High Definition Audio [10de:0ac0] (rev b1) Subsystem: Hewlett-Packard Company Device [103c:3651] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (500ns min, 1250ns max) Interrupt: pin A routed to IRQ 23 Region 0: Memory at 53100000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 00:09.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Bridge [10de:0aab] (rev b1) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:0a.0 Ethernet controller [0200]: nVidia Corporation MCP79 Ethernet [10de:0ab0] (rev b1) Subsystem: Hewlett-Packard Company Device [103c:3651] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (250ns min, 5000ns max) Interrupt: pin A routed to IRQ 21 Region 0: Memory at 53106000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at 30e0 [size=8] Region 2: Memory at 53109000 (32-bit, non-prefetchable) [size=256] Region 3: Memory at 53109300 (32-bit, non-prefetchable) [size=16] Capabilities: <access denied> Kernel driver in use: forcedeth 00:0b.0 SATA controller [0106]: nVidia Corporation MCP79 AHCI Controller [10de:0ab9] (rev b1) (prog-if 01 [AHCI 1.0]) Subsystem: Hewlett-Packard Company Device [103c:3651] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 26 Region 0: I/O ports at 30d8 [size=8] Region 1: I/O ports at 30ec [size=4] Region 2: I/O ports at 30d0 [size=8] Region 3: I/O ports at 30e8 [size=4] Region 4: I/O ports at 30c0 [size=16] Region 5: Memory at 53104000 (32-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: ahci 00:10.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Express Bridge [10de:0aa0] (rev b1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: 52000000-52ffffff Prefetchable memory behind bridge: 0000000040000000-0000000051ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:15.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Express Bridge [10de:0ac6] (rev b1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: 53000000-530fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:16.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Express Bridge [10de:0ac7] (rev b1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 02:00.0 VGA compatible controller [0300]: nVidia Corporation ION LE VGA [10de:087f] (rev b1) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:3651] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 0: Memory at 52000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at 40000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at 50000000 (64-bit, prefetchable) [size=32M] Region 5: I/O ports at 2000 [size=128] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: nvidia 03:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01) Subsystem: Hewlett-Packard Company Device [103c:365e] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at 53000000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: b43-pci-bridge ** USB devices: Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 009: ID 12d1:140c Huawei Technologies Co., Ltd. Bus 002 Device 002: ID 090c:637b Feiya Technology Corp. Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.32-3-686 (SMP w/2 CPU cores) Locale: LANG=pt_PT.UTF-8, LC_CTYPE=pt_PT.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.32-3-686 depends on: ii debconf [debconf-2.0] 1.5.32 Debian configuration management sy ii initramfs-tools [linux-initr 0.94.4 tools for generating an initramfs ii module-init-tools 3.12~pre2-3 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-3-686 recommends: ii firmware-linux-free 2.6.32-9 Binary firmware for various driver ii libc6-i686 2.10.2-9 GNU C Library: Shared libraries [i Versions of packages linux-image-2.6.32-3-686 suggests: pn grub | lilo <none> (no description available) pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-3-686 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) ii firmware-linux 0.24 Binary firmware for various driver ii firmware-linux-nonfree 0.24 Binary firmware for various driver pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) -- debconf information: shared/kernel-image/really-run-bootloader: true linux-image-2.6.32-3-686/postinst/bootloader-error-2.6.32-3-686: linux-image-2.6.32-3-686/postinst/depmod-error-initrd-2.6.32-3-686: false linux-image-2.6.32-3-686/postinst/bootloader-test-error-2.6.32-3-686: linux-image-2.6.32-3-686/postinst/missing-firmware-2.6.32-3-686: linux-image-2.6.32-3-686/prerm/removing-running-kernel-2.6.32-3-686: true linux-image-2.6.32-3-686/prerm/would-invalidate-boot-loader-2.6.32-3-686: true
--- End Message ---
--- Begin Message ---
- To: 583482-done@bugs.debian.org
- Subject: Re: Bug#583482: linux-image-2.6.32: please apply patch for the intel hda regression
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Fri, 25 Jun 2010 02:44:07 +0100
- Message-id: <1277430247.26161.217.camel@localhost>
- In-reply-to: <201005270909.58836.reis@fc.ul.pt>
- References: <201005270909.58836.reis@fc.ul.pt>
On Thu, 2010-05-27 at 09:09 +0100, Pedro Celestino dos Reis Rodrigues wrote: > Package: linux-2.6 > Version: 2.6.32-9 > Severity: important > File: linux-image-2.6.32 > Tags: squeeze > > > > A patch for a kernel bug that eats 25% of the cpu resources in machines > with > hda intel is available http://marc.info/?l=linux- > kernel&m=126177838017002&w=4 > and is applied to the mainline kernel 2.6.34 > As I know, version 2.6.32 will be in squeeze at release time and is affected > by this bug, please apply the patch to it. [...] Thanks, but the bug was introduced after 2.6.32 so we don't need this fix. Ben. -- Ben Hutchings Once a job is fouled up, anything done to improve it makes it worse.Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---