Bug#585770: a collection of NULL pointer dereference [ipv6 and vlans?]
Package: linux-2.6
Version: 2.6.32-15
Severity: normal
Hi,
cimarosa.d.o runs linux-image-2.6.32-bpo.3-amd64 (from 2.6.32-9) just
fine.
However, it does not boot with linux-image-2.6.32-bpo.5-amd64
(2.6.32-15):
During boot up, when init brings up the network we get various different
kernel NULL pointer dereferences. Cimarosa has a lo, an eth0 and an
eth0.221 vlan device. If the eth0.221 is not configured to be brought
up on boot then the system boots correctly, and bringing up the
interface later also appears to work without any ill effects. So
there might be some racy thing going on.
It'd be pretty sweet if cimarosa could be made to work with a recent
debian kernel.
[I can re-run these tests with the real debian.org 2.6.32-5 instead of
the bpo one, but given that the serial console on this monster is very
unreliably and only works once every 10 to 20 tries for grub purposes
I'd rather not unless you feel it's important.]
Longish serial console logs to follow:
Version where the vlan is brought up later:
| Will now restart.
| [71428.321635] Restarting system.
| [71428.379115] machine restart
| [0m[ 0.000000] Initializing cgroup subsys cpuset
| [ 0.000000] Initializing cgroup subsys cpu
| [ 0.000000] Linux version 2.6.32-bpo.5-amd64 (Debian 2.6.32-15~bpo50+1) (norbert@tretkowski.de) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP Fri Jun 11 08:42:31 UTC 2010
| [ 0.000000] Command line: root=/dev/sda1 ro console=tty0 console=ttyS0,9600n8
| [ 0.000000] KERNEL supported cpus:
| [ 0.000000] Intel GenuineIntel
| [ 0.000000] AMD AuthenticAMD
| [ 0.000000] Centaur CentaurHauls
| [ 0.000000] BIOS-provided physical RAM map:
| [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009a000 (usable)
| [ 0.000000] BIOS-e820: 000000000009a000 - 00000000000a0000 (reserved)
| [ 0.000000] BIOS-e820: 00000000000ce000 - 0000000000100000 (reserved)
| [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dff60000 (usable)
| [ 0.000000] BIOS-e820: 00000000dff60000 - 00000000dff70000 (ACPI data)
| [ 0.000000] BIOS-e820: 00000000dff70000 - 00000000dff80000 (ACPI NVS)
| [ 0.000000] BIOS-e820: 00000000dff80000 - 00000000e0000000 (reserved)
| [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec03000 (reserved)
| [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
| [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
| [ 0.000000] BIOS-e820: 0000000100000000 - 0000000220000000 (usable)
| [ 0.000000] DMI present.
| [ 0.000000] last_pfn = 0x220000 max_arch_pfn = 0x400000000
| [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
| [ 0.000000] last_pfn = 0xdff60 max_arch_pfn = 0x400000000
| [ 0.000000] init_memory_mapping: 0000000000000000-00000000dff60000
| [ 0.000000] init_memory_mapping: 0000000100000000-0000000220000000
| [ 0.000000] RAMDISK: 37982000 - 37fefec8
| [ 0.000000] ACPI: RSDP 00000000000f7540 00024 (v02 AMD )
| [ 0.000000] ACPI: XSDT 00000000dff6c1ca 00054 (v01 AMD XSDT 06040000 TFSM 00000000)
| [ 0.000000] ACPI: FACP 00000000dff6c316 000F4 (v03 AMD BLAST 06040000 MSFT 0200000B)
| [ 0.000000] ACPI: DSDT 00000000dff6c40a 038CA (v01 AMD BLAST 06040000 MSFT 0100000E)
| [ 0.000000] ACPI: FACS 00000000dff7bfc0 00040
| [ 0.000000] ACPI: SRAT 00000000dff6fcd4 00110 (v01 AMD HAMMER 06040000 AMD 00000001)
| [ 0.000000] ACPI: SSDT 00000000dff6fde4 0009D (v01 AMD BLAST 06040000 AMD 00000001)
| [ 0.000000] ACPI: SSDT 00000000dff6fe81 0009D (v01 AMD BLAST 06040000 AMD 00000001)
| [ 0.000000] ACPI: APIC 00000000dff6ff1e 00092 (v01 AMD BLAST 06040000 MSFT 0200000B)
| [ 0.000000] ACPI: SPCR 00000000dff6ffb0 00050 (v01 PTLTD $UCRTBL$ 06040000 PTL 00000001)
| [ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0
| [ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0
| [ 0.000000] SRAT: PXM 1 -> APIC 2 -> Node 1
| [ 0.000000] SRAT: PXM 1 -> APIC 3 -> Node 1
| [ 0.000000] SRAT: Node 0 PXM 0 0-a0000
| [ 0.000000] SRAT: Node 0 PXM 0 100000-e0000000
| [ 0.000000] SRAT: Node 0 PXM 0 100000000-120000000
| [ 0.000000] SRAT: Node 1 PXM 1 120000000-220000000
| [ 0.000000] Bootmem setup node 0 0000000000000000-0000000120000000
| [ 0.000000] NODE_DATA [0000000000015440 - 000000000001d43f]
| [ 0.000000] bootmap [000000000001e000 - 0000000000041fff] pages 24
| [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0120000000]
| [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
| [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
| [ 0.000000] #2 [0001000000 - 000167c314] TEXT DATA BSS ==> [0001000000 - 000167c314]
| [ 0.000000] #3 [0037982000 - 0037fefec8] RAMDISK ==> [0037982000 - 0037fefec8]
| [ 0.000000] #4 [000009a000 - 0000100000] BIOS reserved ==> [000009a000 - 0000100000]
| [ 0.000000] #5 [000167d000 - 000167d10c] BRK ==> [000167d000 - 000167d10c]
| [ 0.000000] #6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
| [ 0.000000] #7 [000000c000 - 0000011000] PGTABLE ==> [000000c000 - 0000011000]
| [ 0.000000] #8 [0000011000 - 0000015440] MEMNODEMAP ==> [0000011000 - 0000015440]
| [ 0.000000] Bootmem setup node 1 0000000120000000-0000000220000000
| [ 0.000000] NODE_DATA [0000000120000000 - 0000000120007fff]
| [ 0.000000] bootmap [0000000120008000 - 0000000120027fff] pages 20
| [ 0.000000] (9 early reservations) ==> bootmem [0120000000 - 0220000000]
| [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page
| [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE
| [ 0.000000] #2 [0001000000 - 000167c314] TEXT DATA BSS
| [ 0.000000] #3 [0037982000 - 0037fefec8] RAMDISK
| [ 0.000000] #4 [000009a000 - 0000100000] BIOS reserved
| [ 0.000000] #5 [000167d000 - 000167d10c] BRK
| [ 0.000000] #6 [0000008000 - 000000c000] PGTABLE
| [ 0.000000] #7 [000000c000 - 0000011000] PGTABLE
| [ 0.000000] #8 [0000011000 - 0000015440] MEMNODEMAP
| [ 0.000000] found SMP MP-table at [ffff8800000f75c0] f75c0
| [ 0.000000] [ffffea0003f00000-ffffea0003ffffff] potential offnode page_structs
| [ 0.000000] Zone PFN ranges:
| [ 0.000000] DMA 0x00000000 -> 0x00001000
| [ 0.000000] DMA32 0x00001000 -> 0x00100000
| [ 0.000000] Normal 0x00100000 -> 0x00220000
| [ 0.000000] Movable zone start PFN for each node
| [ 0.000000] early_node_map[4] active PFN ranges
| [ 0.000000] 0: 0x00000000 -> 0x0000009a
| [ 0.000000] 0: 0x00000100 -> 0x000dff60
| [ 0.000000] 0: 0x00100000 -> 0x00120000
| [ 0.000000] 1: 0x00120000 -> 0x00220000
| [ 0.000000] Detected use of extended apic ids on hypertransport bus
| [ 0.000000] Detected use of extended apic ids on hypertransport bus
| [ 0.000000] ACPI: PM-Timer IO Port: 0x508
| [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
| [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
| [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
| [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
| [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
| [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-15
| [ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec01000] gsi_base[16])
| [ 0.000000] IOAPIC[1]: apic_id 5, version 17, address 0xfec01000, GSI 16-31
| [ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec02000] gsi_base[32])
| [ 0.000000] IOAPIC[2]: apic_id 6, version 17, address 0xfec02000, GSI 32-47
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
| [ 0.000000] Using ACPI (MADT) for SMP configuration information
| [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
| [ 0.000000] PM: Registered nosave memory: 000000000009a000 - 00000000000a0000
| [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
| [ 0.000000] PM: Registered nosave memory: 00000000000ce000 - 0000000000100000
| [ 0.000000] PM: Registered nosave memory: 00000000dff60000 - 00000000dff70000
| [ 0.000000] PM: Registered nosave memory: 00000000dff70000 - 00000000dff80000
| [ 0.000000] PM: Registered nosave memory: 00000000dff80000 - 00000000e0000000
| [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000fec00000
| [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec03000
| [ 0.000000] PM: Registered nosave memory: 00000000fec03000 - 00000000fee00000
| [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
| [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff80000
| [ 0.000000] PM: Registered nosave memory: 00000000fff80000 - 0000000100000000
| [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1ec00000)
| [ 0.000000] Booting paravirtualized kernel on bare hardware
| [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:2
| [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880005400000 s90008 r8192 d20584 u1048576
| [ 0.000000] pcpu-alloc: s90008 r8192 d20584 u1048576 alloc=1*2097152
| [ 0.000000] pcpu-alloc: [0] 0 1 [1] 2 3
| [ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 2066308
| [ 0.000000] Policy zone: Normal
| [ 0.000000] Kernel command line: root=/dev/sda1 ro console=tty0 console=ttyS0,9600n8
| [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
| [ 0.000000] Initializing CPU#0
| [ 0.000000] Checking aperture...
| [ 0.000000] No AGP bridge found
| [ 0.000000] Node 0: aperture @ 20000000 size 32 MB
| [ 0.000000] Aperture pointing to e820 RAM. Ignoring.
| [ 0.000000] Your BIOS doesn't leave a aperture memory hole
| [ 0.000000] Please enable the IOMMU option in the BIOS setup
| [ 0.000000] This costs you 64 MB of RAM
| [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000
| [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
| [ 0.000000] Memory: 8190980k/8912896k available (3060k kernel code, 525336k absent, 196580k reserved, 1869k data, 584k init)
| [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=2
| [ 0.000000] Hierarchical RCU implementation.
| [ 0.000000] NR_IRQS:4352 nr_irqs:848
| [ 0.000000] Extended CMOS year: 2000
| [ 0.000000] Console: colour VGA+ 80x25
| [ 0.000000] console [tty0] enabled
| [ 0.000000] console [ttyS0] enabled
| [ 0.000000] Fast TSC calibration using PIT
| [ 0.000000] Detected 2194.862 MHz processor.
| [ 0.012005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.72 BogoMIPS (lpj=8779448)
| [ 0.020026] Security Framework initialized
| [ 0.024006] SELinux: Disabled at boot.
| [ 0.028721] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
| [ 0.038937] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
| [ 0.045380] Mount-cache hash table entries: 256
| [ 0.048188] Initializing cgroup subsys ns
| [ 0.052005] Initializing cgroup subsys cpuacct
| [ 0.056005] Initializing cgroup subsys devices
| [ 0.060004] Initializing cgroup subsys freezer
| [ 0.064004] Initializing cgroup subsys net_cls
| [ 0.068027] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
| [ 0.072003] CPU: L2 Cache: 1024K (64 bytes/line)
| [ 0.076004] CPU 0/0x0 -> Node 0
| [ 0.080005] CPU: Physical Processor ID: 0
| [ 0.084003] CPU: Processor Core ID: 0
| [ 0.088004] mce: CPU supports 5 MCE banks
| [ 0.092011] Performance Events: AMD PMU driver.
| [ 0.100005] ... version: 0
| [ 0.104003] ... bit width: 48
| [ 0.108003] ... generic registers: 4
| [ 0.112003] ... value mask: 0000ffffffffffff
| [ 0.116003] ... max period: 00007fffffffffff
| [ 0.120003] ... fixed-purpose events: 0
| [ 0.124003] ... event mask: 000000000000000f
| [ 0.128656] ACPI: Core revision 20090903
| [ 0.140068] Setting APIC routing to flat
| [ 0.144755] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
| [ 0.187897] CPU0: Dual Core AMD Opteron(tm) Processor 275 stepping 02
| [ 0.200001] Booting processor 1 APIC 0x1 ip 0x6000
| [ 0.016000] Initializing CPU#1
| [ 0.016000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
| [ 0.016000] CPU: L2 Cache: 1024K (64 bytes/line)
| [ 0.016000] CPU 1/0x1 -> Node 0
| [ 0.016000] CPU: Physical Processor ID: 0
| [ 0.016000] CPU: Processor Core ID: 1
| [ 0.292040] CPU1: Dual Core AMD Opteron(tm) Processor 275 stepping 02
| [ 0.304092] Booting processor 2 APIC 0x2 ip 0x6000
| [ 0.016000] Initializing CPU#2
| [ 0.016000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
| [ 0.016000] CPU: L2 Cache: 1024K (64 bytes/line)
| [ 0.016000] CPU 2/0x2 -> Node 1
| [ 0.016000] CPU: Physical Processor ID: 1
| [ 0.016000] CPU: Processor Core ID: 0
| [ 0.400090] CPU2: Dual Core AMD Opteron(tm) Processor 275 stepping 02
| [ 0.412087] Booting processor 3 APIC 0x3 ip 0x6000
| [ 0.016000] Initializing CPU#3
| [ 0.016000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
| [ 0.016000] CPU: L2 Cache: 1024K (64 bytes/line)
| [ 0.016000] CPU 3/0x3 -> Node 1
| [ 0.016000] CPU: Physical Processor ID: 1
| [ 0.016000] CPU: Processor Core ID: 1
| [ 0.508039] CPU3: Dual Core AMD Opteron(tm) Processor 275 stepping 02
| [ 0.520016] Brought up 4 CPUs
| [ 0.524004] Total of 4 processors activated (17557.76 BogoMIPS).
| [ 0.528738] devtmpfs: initialized
| [ 0.538968] regulator: core version 0.5
| [ 0.540059] NET: Registered protocol family 16
| [ 0.544109] run of slot in ranges
| [ 0.548004] TOM: 00000000e0000000 aka 3584M
| [ 0.552015] TOM2: 0000000220000000 aka 8704M
| [ 0.556027] ACPI: bus type pci registered
| [ 0.560062] PCI: Using configuration type 1 for base access
| [ 0.564531] bio: create slab <bio-0> at 0
| [ 0.574577] ACPI: Interpreter enabled
| [ 0.576006] ACPI: (supports S0 S4 S5)
| [ 0.592006] ACPI: Using IOAPIC for interrupt routing
| [ 0.604963] ACPI: No dock devices found.
| [ 0.608704] ACPI: PCI Root Bridge [PCI0] (0000:00)
| [ 0.612080] pci 0000:00:01.0: Enabling HT MSI Mapping
| [ 0.616531] pci 0000:00:03.2: PME# supported from D0 D1 D2 D3hot
| [ 0.620006] pci 0000:00:03.2: PME# disabled
| [ 0.624779] pci 0000:04:04.0: PME# supported from D3hot D3cold
| [ 0.628004] pci 0000:04:04.0: PME# disabled
| [ 0.632058] pci 0000:04:04.1: PME# supported from D3hot D3cold
| [ 0.636004] pci 0000:04:04.1: PME# disabled
| [ 0.645840] ACPI: PCI Root Bridge [PCI1] (0000:ff)
| [ 0.648166] ACPI: PCI Interrupt Link [LNKU] (IRQs *10 11)
| [ 0.664071] ACPI: PCI Interrupt Link [LNKW] (IRQs 10 11) *0, disabled.
| [ 0.685852] ACPI: PCI Interrupt Link [LNKS] (IRQs 5 7 10 11) *0, disabled.
| [ 0.712071] ACPI: PCI Interrupt Link [LN00] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 0.756099] ACPI: PCI Interrupt Link [LN01] (IRQs 3 4 *5 7 10 11 12 14 15)
| [ 0.790890] ACPI: PCI Interrupt Link [LN02] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 0.825845] ACPI: PCI Interrupt Link [LN03] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 0.861877] ACPI: PCI Interrupt Link [LN04] (IRQs 9 11) *0, disabled.
| [ 0.877830] ACPI: PCI Interrupt Link [LN05] (IRQs 9 11) *0, disabled.
| [ 0.896100] ACPI: PCI Interrupt Link [LN06] (IRQs 3 4 5 7 10 *11 12 14 15)
| [ 0.930957] ACPI: PCI Interrupt Link [LN07] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 0.965909] ACPI: PCI Interrupt Link [LN08] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.001831] ACPI: PCI Interrupt Link [LN09] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.037881] ACPI: PCI Interrupt Link [LN0A] (IRQs 3 4 5 *7 10 11 12 14 15)
| [ 1.068100] ACPI: PCI Interrupt Link [LN0B] (IRQs 3 4 5 7 *10 11 12 14 15)
| [ 1.101857] ACPI: PCI Interrupt Link [LN0C] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.137854] ACPI: PCI Interrupt Link [LN0D] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.176072] ACPI: PCI Interrupt Link [LN0E] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.220072] ACPI: PCI Interrupt Link [LN0F] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.260073] ACPI: PCI Interrupt Link [LN10] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.300072] ACPI: PCI Interrupt Link [LN11] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.340073] ACPI: PCI Interrupt Link [LN12] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.380073] ACPI: PCI Interrupt Link [LN13] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.417717] ACPI: PCI Interrupt Link [LN24] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.453815] ACPI: PCI Interrupt Link [LN15] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.489840] ACPI: PCI Interrupt Link [LN16] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.525838] ACPI: PCI Interrupt Link [LN17] (IRQs 3 4 5 7 10
| [ 1.536009] Clocksource tsc unstable (delta = 783745432 ns)
| [ 1.540005] 11 12 14 15) *0, disabled.
| [ 1.565856] ACPI: PCI Interrupt Link [LN18] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.601855] ACPI: PCI Interrupt Link [LN19] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.637878] ACPI: PCI Interrupt Link [LN1A] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.676073] ACPI: PCI Interrupt Link [LN1B] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.720073] ACPI: PCI Interrupt Link [LN1C] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.760074] ACPI: PCI Interrupt Link [LN1D] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.800075] ACPI: PCI Interrupt Link [LN1E] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.840074] ACPI: PCI Interrupt Link [LN1F] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.880092] vgaarb: device added: PCI:0000:00:04.0,decodes=io+mem,owns=io+mem,locks=none
| [ 1.884013] vgaarb: loaded
| [ 1.888044] PCI: Using ACPI for IRQ routing
| [ 1.896289] pnp: PnP ACPI init
| [ 1.900014] ACPI: bus type pnp registered
| [ 1.910142] pnp: PnP ACPI: found 9 devices
| [ 1.912006] ACPI: ACPI bus type pnp unregistered
| [ 1.916017] system 00:07: ioport range 0x40b-0x40b has been reserved
| [ 1.920006] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
| [ 1.924006] system 00:07: ioport range 0x4d6-0x4d6 has been reserved
| [ 1.928006] system 00:07: ioport range 0x500-0x560 has been reserved
| [ 1.932006] system 00:07: ioport range 0x558-0x55b has been reserved
| [ 1.936006] system 00:07: ioport range 0x580-0x58f has been reserved
| [ 1.940006] system 00:07: ioport range 0x590-0x593 has been reserved
| [ 1.944006] system 00:07: ioport range 0x600-0x61f has been reserved
| [ 1.948006] system 00:07: ioport range 0x620-0x623 has been reserved
| [ 1.952006] system 00:07: ioport range 0x700-0x703 has been reserved
| [ 1.956006] system 00:07: ioport range 0xc00-0xc01 has been reserved
| [ 1.960006] system 00:07: ioport range 0xc06-0xc08 has been reserved
| [ 1.964006] system 00:07: ioport range 0xc14-0xc14 has been reserved
| [ 1.968006] system 00:07: ioport range 0xc49-0xc4a has been reserved
| [ 1.972006] system 00:07: ioport range 0xc50-0xc53 has been reserved
| [ 1.976006] system 00:07: ioport range 0xc6c-0xc6c has been reserved
| [ 1.980006] system 00:07: ioport range 0xc6f-0xc6f has been reserved
| [ 1.984006] system 00:07: ioport range 0xcd6-0xcd7 has been reserved
| [ 1.988007] system 00:07: ioport range 0xcf9-0xcf9 could not be reserved
| [ 1.992007] system 00:07: ioport range 0xf50-0xf58 has been reserved
| [ 1.996007] system 00:07: ioport range 0xca2-0xca3 has been reserved
| [ 2.007566] Switching to clocksource acpi_pm
| [ 2.008214] pci 0000:01:0d.0: PCI bridge, secondary bus 0000:02
| [ 2.078375] pci 0000:01:0d.0: IO window: disabled
| [ 2.136571] pci 0000:01:0d.0: MEM window: disabled
| [ 2.196161] pci 0000:01:0d.0: PREFETCH window: disabled
| [ 2.260381] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
| [ 2.331082] pci 0000:00:01.0: IO window: disabled
| [ 2.389290] pci 0000:00:01.0: MEM window: disabled
| [ 2.448914] pci 0000:00:01.0: PREFETCH window: disabled
| [ 2.513102] pci 0000:00:06.0: PCI bridge, secondary bus 0000:03
| [ 2.583806] pci 0000:00:06.0: IO window: disabled
| [ 2.642109] pci 0000:00:06.0: MEM window: 0xe0000000-0xe00fffff
| [ 2.714917] pci 0000:00:06.0: PREFETCH window: 0x000000ec000000-0x000000efffffff
| [ 2.805679] pci 0000:00:07.0: PCI bridge, secondary bus 0000:04
| [ 2.876132] pci 0000:00:07.0: IO window: disabled
| [ 2.934332] pci 0000:00:07.0: MEM window: 0xe8100000-0xe81fffff
| [ 3.007143] pci 0000:00:07.0: PREFETCH window: disabled
| [ 3.071647] pci 0000:00:08.0: PCI bridge, secondary bus 0000:05
| [ 3.142352] pci 0000:00:08.0: IO window: disabled
| [ 3.200656] pci 0000:00:08.0: MEM window: disabled
| [ 3.260181] pci 0000:00:08.0: PREFETCH window: disabled
| [ 3.324468] pci 0000:00:09.0: PCI bridge, secondary bus 0000:06
| [ 3.395072] pci 0000:00:09.0: IO window: disabled
| [ 3.453377] pci 0000:00:09.0: MEM window: disabled
| [ 3.512911] pci 0000:00:09.0: PREFETCH window: disabled
| [ 3.577088] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:07
| [ 3.647794] pci 0000:00:0a.0: IO window: disabled
| [ 3.706097] pci 0000:00:0a.0: MEM window: disabled
| [ 3.765712] pci 0000:00:0a.0: PREFETCH window: disabled
| [ 3.829812] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:08
| [ 3.900617] pci 0000:00:0b.0: IO window: disabled
| [ 3.958820] pci 0000:00:0b.0: MEM window: disabled
| [ 4.018395] pci 0000:00:0b.0: PREFETCH window: disabled
| [ 4.082740] NET: Registered protocol family 2
| [ 4.134945] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
| [ 4.224523] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
| [ 4.317424] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
| [ 4.396390] TCP: Hash tables configured (established 524288 bind 65536)
| [ 4.474472] TCP reno registered
| [ 4.512096] NET: Registered protocol family 1
| [ 4.564077] pci 0000:00:02.0: disabled boot interrupts on device [1166:0205]
| [ 5.057058] pci 0000:00:08.0: Found enabled HT MSI Mapping
| [ 5.120789] pci 0000:00:09.0: Found enabled HT MSI Mapping
| [ 5.186315] pci 0000:00:0a.0: Found enabled HT MSI Mapping
| [ 5.251837] pci 0000:00:0b.0: Found enabled HT MSI Mapping
| [ 5.317468] Unpacking initramfs...
| [ 5.613407] Freeing initrd memory: 6583k freed
| [ 5.671390] PCI-DMA: Disabling AGP.
| [ 5.711023] PCI-DMA: aperture base @ 20000000 size 65536 KB
| [ 5.785233] PCI-DMA: using GART IOMMU.
| [ 5.828151] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
| [ 5.906202] audit: initializing netlink socket (disabled)
| [ 5.969323] type=2000 audit(1276451847.968:1): initialized
| [ 6.035720] HugeTLB registered 2 MB page size, pre-allocated 0 pages
| [ 6.112944] VFS: Disk quotas dquot_6.5.2
| [ 6.158015] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
| [ 6.234904] msgmni has been set to 16010
| [ 6.282098] alg: No test for stdrng (krng)
| [ 6.330681] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
| [ 6.419052] io scheduler noop registered
| [ 6.465823] io scheduler anticipatory registered
| [ 6.520950] io scheduler deadline registered
| [ 6.571945] io scheduler cfq registered (default)
| [ 6.629772] Linux agpgart interface v0.103
| [ 6.677020] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 6.751679] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
| [ 6.822909] input: Macintosh mouse button emulation as /devices/virtual/input/input0
| [ 6.915227] PNP: No PS/2 controller found. Probing ports directly.
| [ 6.990652] serio: i8042 KBD port at 0x60,0x64 irq 1
| [ 7.048280] serio: i8042 AUX port at 0x60,0x64 irq 12
| [ 7.108376] mice: PS/2 mouse device common for all mice
| [ 7.170756] rtc_cmos 00:03: RTC can wake from S4
| [ 7.226170] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
| [ 7.298738] rtc0: alarms up to one year, y3k, 114 bytes nvram
| [ 7.367320] cpuidle: using governor ladder
| [ 7.416464] cpuidle: using governor menu
| [ 7.463269] No iBFT detected.
| [ 7.498695] TCP cubic registered
| [ 7.537244] NET: Registered protocol family 10
| [ 7.590771] lo: Disabled Privacy Extensions
| [ 7.640114] Mobile IPv6
| [ 7.668929] NET: Registered protocol family 17
| [ 7.722350] registered taskstats version 1
| [ 7.771509] rtc_cmos 00:03: setting system clock to 2010-06-13 17:57:48 UTC (1276451868)
| [ 7.867943] Initalizing network drop monitor service
| [ 7.927182] Freeing unused kernel memory: 584k freed
| [ 7.986816] Write protecting the kernel read-only data: 4192k
Loading, please wait...
| Begin: Loading essential drivers ... done.
| Begin: Running /scripts/init-premount ... [ 8.333622] usbcore: registered new interface driver usbfs
| [ 8.359109] SCSI subsystem initialized
| [ 8.393217] Adaptec aacraid driver 1.1-5[2461]-ms
| [ 8.593716] usbcore: registered new interface driver hub
| [ 8.593745] tg3.c:v3.102 (September 1, 2009)
| [ 8.593780] tg3 0000:04:04.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26
| [ 8.897754] aacraid 0000:03:02.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
| [ 8.897801] usbcore: registered new device driver usb
| [ 8.899632] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
| [ 8.901927] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
| [ 8.901930] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
| [ 9.517128] ACPI: PCI Interrupt Link [LNKU] enabled at IRQ 10
| [ 9.623306] ohci_hcd 0000:00:03.0: PCI INT A -> Link[LNKU] -> GSI 10 (level, low) -> IRQ 10
| [ 9.777766] ohci_hcd 0000:00:03.0: OHCI Host Controller
| [ 9.874721] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
| [ 10.016989] eth0: Tigon3 [partno(BCM95780) rev 8003] (PCIX:133MHz:64-bit) MAC address 00:11:25:c4:5a:7c
| [ 10.190577] eth0: attached PHY is 5780 (10/100/1000Base-T Ethernet) (WireSpeed[1])
| [ 10.331410] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
| [ 10.449803] eth0: dma_rwctrl[76144000] dma_mask[40-bit]
| [ 10.546617] ohci_hcd 0000:00:03.0: irq 10, io mem 0xe8011000
| [ 10.652239] tg3 0000:04:04.1: PCI INT B -> GSI 27 (level, low) -> IRQ 27
| [ 10.781050] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
| [ 10.906610] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
| [ 11.041074] usb usb1: Product: OHCI Host Controller
| [ 11.131424] usb usb1: Manufacturer: Linux 2.6.32-bpo.5-amd64 ohci_hcd
| [ 11.250636] usb usb1: SerialNumber: 0000:00:03.0
| [ 11.337259] usb usb1: configuration #1 chosen from 1 choice
| [ 11.440456] hub 1-0:1.0: USB hub found
| [ 11.515021] eth1: Tigon3 [partno(BCM95780) rev 8003] (PCIX:133MHz:64-bit) MAC address 00:11:25:c4:5a:7d
| [ 11.688703] eth1: attached PHY is 5780 (10/100/1000Base-T Ethernet) (WireSpeed[1])
| [ 11.829550] eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
| [ 11.947930] eth1: dma_rwctrl[76144000] dma_mask[40-bit]
| [ 12.044748] hub 1-0:1.0: 2 ports detected
| [ 12.119276] ehci_hcd 0000:00:03.2: PCI INT A -> Link[LNKU] -> GSI 10 (level, low) -> IRQ 10
| [ 12.273829] IRQ 22/aacraid: IRQF_DISABLED is not guaranteed on shared IRQs
| [ 12.402036] ehci_hcd 0000:00:03.2: EHCI Host Controller
| [ 12.498757] ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 2
| [ 12.660034] ehci_hcd 0000:00:03.2: irq 10, io mem 0xe8013000
| [ 12.768234] AAC0: kernel 4.1-0[8195]
| [ 12.835967] AAC0: monitor 4.1-0[8195]
| [ 12.903973] AAC0: bios 4.1-0[8195]
| [ 12.905029] usb 1-1: new low speed USB device using ohci_hcd and address 2
| [ 13.096027] AAC0: serial CB7060
| [ 13.155433] scsi0 : aacraid
| [ 13.207204] ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00
| [ 13.313730] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
| [ 13.317057] hub 1-0:1.0: unable to enumerate USB device on port 1
| [ 13.552037] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
| [ 13.686496] usb usb2: Product: EHCI Host Controller
| [ 13.776849] usb usb2: Manufacturer: Linux 2.6.32-bpo.5-amd64 ehci_hcd
| [ 13.896063] usb usb2: SerialNumber: 0000:00:03.2
| [ 13.982579] usb usb2: configuration #1 chosen from 1 choice
| [ 13.983896] scsi 0:0:0:0: Direct-Access Adaptec 2410SA Mirror V1.0 PQ: 0 ANSI: 2
| [ 13.990710] scsi 0:1:2:0: Direct-Access Hitachi HDS721616PLA380 P22O PQ: 0 ANSI: 2
| [ 13.991875] scsi 0:1:3:0: Direct-Access Hitachi HDS721616PLA380 P22O PQ: 0 ANSI: 2
| [ 14.018167] sd 0:0:0:0: [sda] 312497920 512-byte logical blocks: (159 GB/149 GiB)
| [ 14.018186] sd 0:0:0:0: [sda] Write Protect is off
| [ 14.018220] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
| [ 14.018395] sda: sda1 sda2 < sda5 sda6 sda7 >
| [ 15.017836] hub 2-0:1.0: USB hub found
| [ 15.018014] sd 0:0:0:0: [sda] Attached SCSI removable disk
| [ 15.190613] hub 2-0:1.0: 4 ports detected
| [ 15.265847] scsi1 : pata_serverworks
| [ 15.333158] scsi2 : pata_serverworks
| [ 15.400558] ata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0x2000 irq 14
| [ 15.528675] ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0x2008 irq 15
| [ 15.656910] ohci_hcd 0000:00:03.1: PCI INT A -> Link[LNKU] -> GSI 10 (level, low) -> IRQ 10
| [ 15.811489] ohci_hcd 0000:00:03.1: OHCI Host Controller
| [ 15.908478] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
| [ 16.046379] ata1.00: ATAPI: HL-DT-ST GCR-8240N, 1.06, max UDMA/33
| [ 16.161699] ohci_hcd 0000:00:03.1: irq 10, io mem 0xe8012000
| [ 16.288968] ata1.00: configured for UDMA/33
| [ 16.368476] scsi 1:0:0:0: CD-ROM HL-DT-ST CD-ROM GCR-8240N 1.06 PQ: 0 ANSI: 5
| [ 16.370671] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
| [ 16.370674] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
| [ 16.370676] usb usb3: Product: OHCI Host Controller
| [ 16.370678] usb usb3: Manufacturer: Linux 2.6.32-bpo.5-amd64 ohci_hcd
| [ 16.370680] usb usb3: SerialNumber: 0000:00:03.1
| [ 16.370771] usb usb3: configuration #1 chosen from 1 choice
| [ 16.370800] hub 3-0:1.0: USB hub found
| [ 16.370814] hub 3-0:1.0: 2 ports detected
| [ 17.376032] usb 1-1: new low speed USB device using ohci_hcd and address 3
| [ 17.499941] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
| [ 17.499945] Uniform CD-ROM driver Revision: 3.20
| [ 17.513552] sd 0:0:0:0: Attached scsi generic sg0 type 0
| [ 17.514063] scsi 0:1:2:0: Attached scsi generic sg1 type 0
| [ 17.514823] scsi 0:1:3:0: Attached scsi generic sg2 type 0
| [ 17.515331] sr 1:0:0:0: Attached scsi generic sg3 type 5
| done.
| Begin: Mounting root file system ... Begin: Running /scripts/loc[ 18.187078] kjournald starting. Commit interval 5 seconds
| al-top ... done.
| Begin: Running[ 18.187089] EXT3-fs: mounted filesystem with ordered data mode.
| /scripts/local-premount ... done.
| Begin: Running /scripts/local-bottom ... done.
| done.
| Begin: Running /scrip[ 18.536819] usb 1-1: New USB device found, idVendor=0a81, idProduct=0205
| ts/init-bottom ... done.
| [ 18.682967] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
| [ 18.838893] usb 1-1: Product: PS2 to USB Converter
| [ 18.928540] usb 1-1: Manufacturer: CHESEN
[ 19.003008] usb 1-1: configuration #1 chosen from 1 choice
INIT:version 2.86 booting
| Starting the hotplug events dispatcher: udevd[ 20.149819] udevd version 125 started
| .
| Synthesizing the initial hotplug events...done.
| Waiting for /dev to be fully populated...[ 20.456721] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
| [ 20.624029] piix4_smbus 0000:00:02.0: SMBus Host Controller at 0x580, revision 0
| [ 20.805059] input: PC Speaker as /devices/platform/pcspkr/input/input1
| [ 20.844228] EDAC MC: Ver: 2.1.0 Jun 11 2010
| [ 21.027188] EDAC amd64_edac: Ver: 3.2.0 Jun 11 2010
| [ 21.134576] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:0c/PNP0C0C:00/input/input2
| [ 21.346598] EDAC amd64: ECC is enabled by BIOS.
| [ 21.381747] processor LNXCPU:00: registered as cooling_device0
| [ 21.382431] processor LNXCPU:01: registered as cooling_device1
| [ 21.383085] processor LNXCPU:02: registered as cooling_device2
| [ 21.383728] processor LNXCPU:03: registered as cooling_device3
| [ 21.496598] ACPI: Power Button [PWRB]
| [ 21.496691] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
| [ 21.496718] ACPI: Power Button [PWRF]
| [ 22.143691] usbcore: registered new interface driver hiddev
| [ 22.219965] Error: Driver 'pcspkr' is already registered, aborting...
| [ 22.366024] EDAC amd64: ECC is enabled by BIOS.
| [ 22.374575] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:03.0/usb1/1-1/1-1:1.0/input/input4
| [ 22.375523] generic-usb 0003:0A81:0205.0001: input,hidraw0: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:03.0-1/input0
| [ 22.386595] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:03.0/usb1/1-1/1-1:1.1/input/input5
| [ 22.388054] generic-usb 0003:0A81:0205.0002: input,hidraw1: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:03.0-1/input1
| [ 22.388080] usbcore: registered new interface driver usbhid
| [ 22.388709] usbhid: v2.6:USB HID core driver
| [ 23.483527] EDAC MC0: Giving out device to 'amd64_edac' 'RevF': DEV 0000:00:18.2
| [ 23.621403] EDAC MC1: Giving out device to 'amd64_edac' 'RevF': DEV 0000:00:19.2
| [ 23.623596] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
| [ 23.884368] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
| done.
| %@Setting parameters of disc: (none).
| Setting the system clock.
| Activating swap...[ 25.185276] Adding 1108444k swap on /dev/sda5. Priority:-1 extents:1 across:1108444k
| done.
| Checking root file system...fsck 1.41.3 (12-Oct-2008)
| /dev/sda1: clean, 80616/1269760 [ 25.721655] EXT3 FS on sda1, files, 668495/50internal journal
| 74524 blocks
| done.
| Setting the system clock.
| Cleaning up ifupdown....
| Loading kernel modules...[ 26.329852] uhci_hcd: USB Universal Host Controller Interface driver
| done.
| Checking file systems...fsck 1.41.3 (12-Oct-2008)
| /dev/sda7: clean, 3279703/8060928 files, 22104226/32220357 blocks
| /dev/sda6: clean, 14955/373152 files, 1028562/1490020 blocks
| done.
| Setting kernel variables (/etc/sysctl.conf)...done.
| Setting kernel variables (/etc/sysctl.d/mmap_min_addr.[ 27.430938] kjournald starting. Commit interval 5 seconds
| conf)...done.
| Mounting local fi[ 27.560146] EXT3 FS on sda7, lesystems...internal journal
| [ 27.680819] EXT3-fs: mounted filesystem with ordered data mode.
| [ 27.812586] kjournald starting. Commit interval 5 seconds
| [ 27.816540] EXT3 FS on sda6, internal journal
| [ 27.816546] EXT3-fs: mounted filesystem with ordered data mode.
| done.
| Activating swapfile swap...done.
| Setting up networking....
| Configuring network interfaces...[ 29.078012] ADDRCONF(NETDEV_UP): eth0: link is not ready
| Starting portmap daemon....
| Starting NFS common utilities: statd.
| [ 31.515255] tg3: eth0: Link is up at 1000 Mbps, full duplex.
| [ 31.518571] tg3: eth0: Flow control is on for TX and on for RX.
| [ 31.518571] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
| mount.nfs: mount to NFS server '192.168.2.5' failed: System Error: No route to host
| mount.nfs: mount to NFS server '192.168.2.5' failed: timed out, retrying
| ^CStarting portmap daemon...Already running..
| Starting NFS common utilities: statd.
| Setting sensors limits.
| Setting console screen modes and fonts.
| ]Rcannot (un)set powersave mode
| [9;30][14;30]
INIT: Entering runlevel: 2
| Starting system logging: syslog-ng.
| Starting OpenBSD Secure Shell server: sshd.
| Starting PostgreSQL 8.4 database server: wanna-build.
| Starting file integrity checker: samhain.
| Starting MTA: exim4.
| Setting up Machine Check Exceptions trigger... done.
| Running Machine Check Exceptions decoder... done.
| Starting nagios-nrpe: nagios-nrpe.
| Starting NFS common utilities: statd.
| Starting NTP server: ntpd.
| Starting deferred execution scheduler: atd[ 58.353704] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
| .
| Starting periodic command scheduler: crond.
| Starting web server: apache2.
| Starting Munin-Node: done.
| Updating the system logo...done.
| Starting uptime daemon: upStarting monit daemon
| Monit started
|
| Debian GNU/Linux 5.0 cimarosa ttyS0
|
| cimarosa login:
| Debian GNU/Linux 5.0 cimarosa ttyS0
|
| cimarosa login:
| Debian GNU/Linux 5.0 cimarosa ttyS0
|
[bringing up vlan eth0.221 on an ssh session]
| cimarosa login: [ 94.277640] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
| [ 94.402990] All bugs added by David S. Miller <davem@redhat.com>
| [ 94.672184] RPC: Registered udp transport module.
| [ 94.759310] RPC: Registered tcp transport module.
| [ 94.846492] RPC: Registered tcp NFSv4.1 backchannel transport module.
| [ 95.011225] Slow work thread pool: Starting up
| [ 95.094575] Slow work thread pool: Ready
| [ 95.168182] FS-Cache: Loaded
| [ 95.272924] FS-Cache: Netfs 'nfs' registered for caching
| [ 95.374642] svc: failed to register lockdv1 RPC service (errno 97).
|
| Debian GNU/Linux 5.0 cimarosa ttyS0
|
| cimarosa login:
| Debian GNU/Linux 5.0 cimarosa ttyS0
|
| cimarosa login:
Stopping web server: apache2 ... waiting .
| Stopping deferred execution scheduler: atd.
| Stopping file integrity checker: samhain.
| Stopping MTA: exim4_listener.
| Stopping fan speed regulator: fancontrol.
| Stopping Munin-Node: done.
| Stopping nagios-nrpe: nagios-nrpe.
| Stopping NFS common utilities: statd.
| Stopping rsync daemon: rsync.
| Stopping PostgreSQL 8.4 database server: wanna-build.
| Stopping NTP server: ntpd.
| Saving the system clock.
| Stopping system logging: syslog-ng.
| Stopping uptime daemon: uptimed.
| Asking all remaining processes to terminate...done.
| All processes ended within 2 seconds....done.
| Stopping portmap daemon....
| Deconfiguring network interfaces...[ 187.372215] tg3 0000:04:04.0: PME# enabled
| [ 187.459306] pci 0000:00:07.0: wake-up capability enabled by ACPI
| Removed VLAN -:eth0.221:-
| done.
| Cleaning up ifupdown....
| Unmounting temporary filesystems...done.
| Deactivating swap...done.
| Unmounting local filesystems...done.
| Will now restart.
| [ 191.256434] Restarting system.
| [ 191.313999] machine restart
This time things blow up:
| [ 0.000000] Initializing cgroup subsys cpu
| [ 0.000000] Linux version 2.6.32-bpo.5-amd64 (Debian 2.6.32-15~bpo50+1) (norbert@tretkowski.de) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP Fri Jun 11 08:42:31 UTC 2010
| [ 0.000000] Command line: root=/dev/sda1 ro console=tty0 console=ttyS0,9600n8
| [ 0.000000] KERNEL supported cpus:
| [ 0.000000] Intel GenuineIntel
| [ 0.000000] AMD AuthenticAMD
| [ 0.000000] Centaur CentaurHauls
| [ 0.000000] BIOS-provided physical RAM map:
| [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009a000 (usable)
| [ 0.000000] BIOS-e820: 000000000009a000 - 00000000000a0000 (reserved)
| [ 0.000000] BIOS-e820: 00000000000ce000 - 0000000000100000 (reserved)
| [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dff60000 (usable)
| [ 0.000000] BIOS-e820: 00000000dff60000 - 00000000dff70000 (ACPI data)
| [ 0.000000] BIOS-e820: 00000000dff70000 - 00000000dff80000 (ACPI NVS)
| [ 0.000000] BIOS-e820: 00000000dff80000 - 00000000e0000000 (reserved)
| [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec03000 (reserved)
| [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
| [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
| [ 0.000000] BIOS-e820: 0000000100000000 - 0000000220000000 (usable)
| [ 0.000000] DMI present.
| [ 0.000000] last_pfn = 0x220000 max_arch_pfn = 0x400000000
| [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
| [ 0.000000] last_pfn = 0xdff60 max_arch_pfn = 0x400000000
| [ 0.000000] init_memory_mapping: 0000000000000000-00000000dff60000
| [ 0.000000] init_memory_mapping: 0000000100000000-0000000220000000
| [ 0.000000] RAMDISK: 37982000 - 37fefec8
| [ 0.000000] ACPI: RSDP 00000000000f7540 00024 (v02 AMD )
| [ 0.000000] ACPI: XSDT 00000000dff6c1ca 00054 (v01 AMD XSDT 06040000 TFSM 00000000)
| [ 0.000000] ACPI: FACP 00000000dff6c316 000F4 (v03 AMD BLAST 06040000 MSFT 0200000B)
| [ 0.000000] ACPI: DSDT 00000000dff6c40a 038CA (v01 AMD BLAST 06040000 MSFT 0100000E)
| [ 0.000000] ACPI: FACS 00000000dff7bfc0 00040
| [ 0.000000] ACPI: SRAT 00000000dff6fcd4 00110 (v01 AMD HAMMER 06040000 AMD 00000001)
| [ 0.000000] ACPI: SSDT 00000000dff6fde4 0009D (v01 AMD BLAST 06040000 AMD 00000001)
| [ 0.000000] ACPI: SSDT 00000000dff6fe81 0009D (v01 AMD BLAST 06040000 AMD 00000001)
| [ 0.000000] ACPI: APIC 00000000dff6ff1e 00092 (v01 AMD BLAST 06040000 MSFT 0200000B)
| [ 0.000000] ACPI: SPCR 00000000dff6ffb0 00050 (v01 PTLTD $UCRTBL$ 06040000 PTL 00000001)
| [ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0
| [ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0
| [ 0.000000] SRAT: PXM 1 -> APIC 2 -> Node 1
| [ 0.000000] SRAT: PXM 1 -> APIC 3 -> Node 1
| [ 0.000000] SRAT: Node 0 PXM 0 0-a0000
| [ 0.000000] SRAT: Node 0 PXM 0 100000-e0000000
| [ 0.000000] SRAT: Node 0 PXM 0 100000000-120000000
| [ 0.000000] SRAT: Node 1 PXM 1 120000000-220000000
| [ 0.000000] Bootmem setup node 0 0000000000000000-0000000120000000
| [ 0.000000] NODE_DATA [0000000000015440 - 000000000001d43f]
| [ 0.000000] bootmap [000000000001e000 - 0000000000041fff] pages 24
| [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0120000000]
| [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
| [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
| [ 0.000000] #2 [0001000000 - 000167c314] TEXT DATA BSS ==> [0001000000 - 000167c314]
| [ 0.000000] #3 [0037982000 - 0037fefec8] RAMDISK ==> [0037982000 - 0037fefec8]
| [ 0.000000] #4 [000009a000 - 0000100000] BIOS reserved ==> [000009a000 - 0000100000]
| [ 0.000000] #5 [000167d000 - 000167d10c] BRK ==> [000167d000 - 000167d10c]
| [ 0.000000] #6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
| [ 0.000000] #7 [000000c000 - 0000011000] PGTABLE ==> [000000c000 - 0000011000]
| [ 0.000000] #8 [0000011000 - 0000015440] MEMNODEMAP ==> [0000011000 - 0000015440]
| [ 0.000000] Bootmem setup node 1 0000000120000000-0000000220000000
| [ 0.000000] NODE_DATA [0000000120000000 - 0000000120007fff]
| [ 0.000000] bootmap [0000000120008000 - 0000000120027fff] pages 20
| [ 0.000000] (9 early reservations) ==> bootmem [0120000000 - 0220000000]
| [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page
| [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE
| [ 0.000000] #2 [0001000000 - 000167c314] TEXT DATA BSS
| [ 0.000000] #3 [0037982000 - 0037fefec8] RAMDISK
| [ 0.000000] #4 [000009a000 - 0000100000] BIOS reserved
| [ 0.000000] #5 [000167d000 - 000167d10c] BRK
| [ 0.000000] #6 [0000008000 - 000000c000] PGTABLE
| [ 0.000000] #7 [000000c000 - 0000011000] PGTABLE
| [ 0.000000] #8 [0000011000 - 0000015440] MEMNODEMAP
| [ 0.000000] found SMP MP-table at [ffff8800000f75c0] f75c0
| [ 0.000000] [ffffea0003f00000-ffffea0003ffffff] potential offnode page_structs
| [ 0.000000] Zone PFN ranges:
| [ 0.000000] DMA 0x00000000 -> 0x00001000
| [ 0.000000] DMA32 0x00001000 -> 0x00100000
| [ 0.000000] Normal 0x00100000 -> 0x00220000
| [ 0.000000] Movable zone start PFN for each node
| [ 0.000000] early_node_map[4] active PFN ranges
| [ 0.000000] 0: 0x00000000 -> 0x0000009a
| [ 0.000000] 0: 0x00000100 -> 0x000dff60
| [ 0.000000] 0: 0x00100000 -> 0x00120000
| [ 0.000000] 1: 0x00120000 -> 0x00220000
| [ 0.000000] Detected use of extended apic ids on hypertransport bus
| [ 0.000000] Detected use of extended apic ids on hypertransport bus
| [ 0.000000] ACPI: PM-Timer IO Port: 0x508
| [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
| [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
| [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
| [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
| [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
| [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-15
| [ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec01000] gsi_base[16])
| [ 0.000000] IOAPIC[1]: apic_id 5, version 17, address 0xfec01000, GSI 16-31
| [ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec02000] gsi_base[32])
| [ 0.000000] IOAPIC[2]: apic_id 6, version 17, address 0xfec02000, GSI 32-47
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
| [ 0.000000] Using ACPI (MADT) for SMP configuration information
| [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
| [ 0.000000] PM: Registered nosave memory: 000000000009a000 - 00000000000a0000
| [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
| [ 0.000000] PM: Registered nosave memory: 00000000000ce000 - 0000000000100000
| [ 0.000000] PM: Registered nosave memory: 00000000dff60000 - 00000000dff70000
| [ 0.000000] PM: Registered nosave memory: 00000000dff70000 - 00000000dff80000
| [ 0.000000] PM: Registered nosave memory: 00000000dff80000 - 00000000e0000000
| [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000fec00000
| [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec03000
| [ 0.000000] PM: Registered nosave memory: 00000000fec03000 - 00000000fee00000
| [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
| [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff80000
| [ 0.000000] PM: Registered nosave memory: 00000000fff80000 - 0000000100000000
| [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1ec00000)
| [ 0.000000] Booting paravirtualized kernel on bare hardware
| [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:2
| [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880005400000 s90008 r8192 d20584 u1048576
| [ 0.000000] pcpu-alloc: s90008 r8192 d20584 u1048576 alloc=1*2097152
| [ 0.000000] pcpu-alloc: [0] 0 1 [1] 2 3
| [ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 2066308
| [ 0.000000] Policy zone: Normal
| [ 0.000000] Kernel command line: root=/dev/sda1 ro console=tty0 console=ttyS0,9600n8
| [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
| [ 0.000000] Initializing CPU#0
| [ 0.000000] Checking aperture...
| [ 0.000000] No AGP bridge found
| [ 0.000000] Node 0: aperture @ 20000000 size 32 MB
| [ 0.000000] Aperture pointing to e820 RAM. Ignoring.
| [ 0.000000] Your BIOS doesn't leave a aperture memory hole
| [ 0.000000] Please enable the IOMMU option in the BIOS setup
| [ 0.000000] This costs you 64 MB of RAM
| [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000
| [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
| [ 0.000000] Memory: 8190980k/8912896k available (3060k kernel code, 525336k absent, 196580k reserved, 1869k data, 584k init)
| [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=2
| [ 0.000000] Hierarchical RCU implementation.
| [ 0.000000] NR_IRQS:4352 nr_irqs:848
| [ 0.000000] Extended CMOS year: 2000
| [ 0.000000] Console: colour VGA+ 80x25
| [ 0.000000] console [tty0] enabled
| [ 0.000000] console [ttyS0] enabled
| [ 0.000000] Fast TSC calibration using PIT
| [ 0.000000] Detected 2194.578 MHz processor.
| [ 0.012005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.15 BogoMIPS (lpj=8778312)
| [ 0.020026] Security Framework initialized
| [ 0.024006] SELinux: Disabled at boot.
| [ 0.028721] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
| [ 0.041926] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
| [ 0.048372] Mount-cache hash table entries: 256
| [ 0.052180] Initializing cgroup subsys ns
| [ 0.056005] Initializing cgroup subsys cpuacct
| [ 0.060005] Initializing cgroup subsys devices
| [ 0.064004] Initializing cgroup subsys freezer
| [ 0.068003] Initializing cgroup subsys net_cls
| [ 0.072025] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
| [ 0.076003] CPU: L2 Cache: 1024K (64 bytes/line)
| [ 0.080004] CPU 0/0x0 -> Node 0
| [ 0.084005] CPU: Physical Processor ID: 0
| [ 0.088003] CPU: Processor Core ID: 0
| [ 0.092004] mce: CPU supports 5 MCE banks
| [ 0.096011] Performance Events: AMD PMU driver.
| [ 0.104005] ... version: 0
| [ 0.108003] ... bit width: 48
| [ 0.112003] ... generic registers: 4
| [ 0.116003] ... value mask: 0000ffffffffffff
| [ 0.120003] ... max period: 00007fffffffffff
| [ 0.124003] ... fixed-purpose events: 0
| [ 0.128003] ... event mask: 000000000000000f
| [ 0.132657] ACPI: Core revision 20090903
| [ 0.144066] Setting APIC routing to flat
| [ 0.148755] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
| [ 0.194183] CPU0: Dual Core AMD Opteron(tm) Processor 275 stepping 02
| [ 0.208001] Booting processor 1 APIC 0x1 ip 0x6000
| [ 0.016000] Initializing CPU#1
| [ 0.016000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
| [ 0.016000] CPU: L2 Cache: 1024K (64 bytes/line)
| [ 0.016000] CPU 1/0x1 -> Node 0
| [ 0.016000] CPU: Physical Processor ID: 0
| [ 0.016000] CPU: Processor Core ID: 1
| [ 0.300080] CPU1: Dual Core AMD Opteron(tm) Processor 275 stepping 02
| [ 0.312090] Booting processor 2 APIC 0x2 ip 0x6000
| [ 0.016000] Initializing CPU#2
| [ 0.016000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
| [ 0.016000] CPU: L2 Cache: 1024K (64 bytes/line)
| [ 0.016000] CPU 2/0x2 -> Node 1
| [ 0.016000] CPU: Physical Processor ID: 1
| [ 0.016000] CPU: Processor Core ID: 0
| [ 0.408056] CPU2: Dual Core AMD Opteron(tm) Processor 275 stepping 02
| [ 0.420085] Booting processor 3 APIC 0x3 ip 0x6000
| [ 0.016000] Initializing CPU#3
| [ 0.016000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
| [ 0.016000] CPU: L2 Cache: 1024K (64 bytes/line)
| [ 0.016000] CPU 3/0x3 -> Node 1
| [ 0.016000] CPU: Physical Processor ID: 1
| [ 0.016000] CPU: Processor Core ID: 1
| [ 0.516098] CPU3: Dual Core AMD Opteron(tm) Processor 275 stepping 02
| [ 0.528016] Brought up 4 CPUs
| [ 0.532004] Total of 4 processors activated (17556.96 BogoMIPS).
| [ 0.536738] devtmpfs: initialized
| [ 0.547069] regulator: core version 0.5
| [ 0.548062] NET: Registered protocol family 16
| [ 0.552109] run of slot in ranges
| [ 0.556004] TOM: 00000000e0000000 aka 3584M
| [ 0.560015] TOM2: 0000000220000000 aka 8704M
| [ 0.564027] ACPI: bus type pci registered
| [ 0.568062] PCI: Using configuration type 1 for base access
| [ 0.572536] bio: create slab <bio-0> at 0
| [ 0.582722] ACPI: Interpreter enabled
| [ 0.584006] ACPI: (supports S0 S4 S5)
| [ 0.600006] ACPI: Using IOAPIC for interrupt routing
| [ 0.612961] ACPI: No dock devices found.
| [ 0.616704] ACPI: PCI Root Bridge [PCI0] (0000:00)
| [ 0.620080] pci 0000:00:01.0: Enabling HT MSI Mapping
| [ 0.624530] pci 0000:00:03.2: PME# supported from D0 D1 D2 D3hot
| [ 0.628006] pci 0000:00:03.2: PME# disabled
| [ 0.632778] pci 0000:04:04.0: PME# supported from D3hot D3cold
| [ 0.636004] pci 0000:04:04.0: PME# disabled
| [ 0.640058] pci 0000:04:04.1: PME# supported from D3hot D3cold
| [ 0.644004] pci 0000:04:04.1: PME# disabled
| [ 0.654057] ACPI: PCI Root Bridge [PCI1] (0000:ff)
| [ 0.656168] ACPI: PCI Interrupt Link [LNKU] (IRQs *10 11)
| [ 0.672072] ACPI: PCI Interrupt Link [LNKW] (IRQs 10 11) *0, disabled.
| [ 0.693975] ACPI: PCI Interrupt Link [LNKS] (IRQs 5 7 10 11) *0, disabled.
| [ 0.720072] ACPI: PCI Interrupt Link [LN00] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 0.764100] ACPI: PCI Interrupt Link [LN01] (IRQs 3 4 *5 7 10 11 12 14 15)
| [ 0.798915] ACPI: PCI Interrupt Link [LN02] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 0.833765] ACPI: PCI Interrupt Link [LN03] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 0.869897] ACPI: PCI Interrupt Link [LN04] (IRQs 9 11) *0, disabled.
| [ 0.888025] ACPI: PCI Interrupt Link [LN05] (IRQs 9 11) *0, disabled.
| [ 0.908100] ACPI: PCI Interrupt Link [LN06] (IRQs 3 4 5 7 10 *11 12 14 15)
| [ 0.942976] ACPI: PCI Interrupt Link [LN07] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 0.977836] ACPI: PCI Interrupt Link [LN08] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.013858] ACPI: PCI Interrupt Link [LN09] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.049907] ACPI: PCI Interrupt Link [LN0A] (IRQs 3 4 5 *7 10 11 12 14 15)
| [ 1.080100] ACPI: PCI Interrupt Link [LN0B] (IRQs 3 4 5 7 *10 11 12 14 15)
| [ 1.113868] ACPI: PCI Interrupt Link [LN0C] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.149874] ACPI: PCI Interrupt Link [LN0D] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.185902] ACPI: PCI Interrupt Link [LN0E] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.228073] ACPI: PCI Interrupt Link [LN0F] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.268073] ACPI: PCI Interrupt Link [LN10] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.308073] ACPI: PCI Interrupt Link [LN11] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.348073] ACPI: PCI Interrupt Link [LN12] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.388073] ACPI: PCI Interrupt Link [LN13] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.425823] ACPI: PCI Interrupt Link [LN24] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.461835] ACPI: PCI Interrupt Link [LN15] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.497862] ACPI: PCI Interrupt Link [LN16] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.533867] ACPI: PCI Interrupt Link [LN17] (IRQs 3 4 5 7 10
| [ 1.544009] Clocksource tsc unstable (delta = 795109272 ns)
| [ 1.548005] 11 12 14 15) *0, disabled.
| [ 1.573685] ACPI: PCI Interrupt Link [LN18] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.609876] ACPI: PCI Interrupt Link [LN19] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.645908] ACPI: PCI Interrupt Link [LN1A] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.681820] ACPI: PCI Interrupt Link [LN1B] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.720074] ACPI: PCI Interrupt Link [LN1C] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.764074] ACPI: PCI Interrupt Link [LN1D] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.804074] ACPI: PCI Interrupt Link [LN1E] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.844074] ACPI: PCI Interrupt Link [LN1F] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.884092] vgaarb: device added: PCI:0000:00:04.0,decodes=io+mem,owns=io+mem,locks=none
| [ 1.888013] vgaarb: loaded
| [ 1.892043] PCI: Using ACPI for IRQ routing
| [ 1.900640] pnp: PnP ACPI init
| [ 1.904013] ACPI: bus type pnp registered
| [ 1.914436] pnp: PnP ACPI: found 9 devices
| [ 1.916006] ACPI: ACPI bus type pnp unregistered
| [ 1.920017] system 00:07: ioport range 0x40b-0x40b has been reserved
| [ 1.924006] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
| [ 1.928006] system 00:07: ioport range 0x4d6-0x4d6 has been reserved
| [ 1.932006] system 00:07: ioport range 0x500-0x560 has been reserved
| [ 1.936006] system 00:07: ioport range 0x558-0x55b has been reserved
| [ 1.940006] system 00:07: ioport range 0x580-0x58f has been reserved
| [ 1.944006] system 00:07: ioport range 0x590-0x593 has been reserved
| [ 1.948006] system 00:07: ioport range 0x600-0x61f has been reserved
| [ 1.952006] system 00:07: ioport range 0x620-0x623 has been reserved
| [ 1.956006] system 00:07: ioport range 0x700-0x703 has been reserved
| [ 1.960006] system 00:07: ioport range 0xc00-0xc01 has been reserved
| [ 1.964006] system 00:07: ioport range 0xc06-0xc08 has been reserved
| [ 1.968006] system 00:07: ioport range 0xc14-0xc14 has been reserved
| [ 1.972006] system 00:07: ioport range 0xc49-0xc4a has been reserved
| [ 1.976006] system 00:07: ioport range 0xc50-0xc53 has been reserved
| [ 1.980006] system 00:07: ioport range 0xc6c-0xc6c has been reserved
| [ 1.984006] system 00:07: ioport range 0xc6f-0xc6f has been reserved
| [ 1.988006] system 00:07: ioport range 0xcd6-0xcd7 has been reserved
| [ 1.992007] system 00:07: ioport range 0xcf9-0xcf9 could not be reserved
| [ 1.996006] system 00:07: ioport range 0xf50-0xf58 has been reserved
| [ 2.000007] system 00:07: ioport range 0xca2-0xca3 has been reserved
| [ 2.011978] Switching to clocksource acpi_pm
| [ 2.012214] pci 0000:01:0d.0: PCI bridge, secondary bus 0000:02
| [ 2.082396] pci 0000:01:0d.0: IO window: disabled
| [ 2.140597] pci 0000:01:0d.0: MEM window: disabled
| [ 2.200166] pci 0000:01:0d.0: PREFETCH window: disabled
| [ 2.264403] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
| [ 2.335205] pci 0000:00:01.0: IO window: disabled
| [ 2.393310] pci 0000:00:01.0: MEM window: disabled
| [ 2.452949] pci 0000:00:01.0: PREFETCH window: disabled
| [ 2.517223] pci 0000:00:06.0: PCI bridge, secondary bus 0000:03
| [ 2.587828] pci 0000:00:06.0: IO window: disabled
| [ 2.646035] pci 0000:00:06.0: MEM window: 0xe0000000-0xe00fffff
| [ 2.718839] pci 0000:00:06.0: PREFETCH window: 0x000000ec000000-0x000000efffffff
| [ 2.809683] pci 0000:00:07.0: PCI bridge, secondary bus 0000:04
| [ 2.880151] pci 0000:00:07.0: IO window: disabled
| [ 2.938356] pci 0000:00:07.0: MEM window: 0xe8100000-0xe81fffff
| [ 3.011164] pci 0000:00:07.0: PREFETCH window: disabled
| [ 3.075669] pci 0000:00:08.0: PCI bridge, secondary bus 0000:05
| [ 3.146374] pci 0000:00:08.0: IO window: disabled
| [ 3.204585] pci 0000:00:08.0: MEM window: disabled
| [ 3.264260] pci 0000:00:08.0: PREFETCH window: disabled
| [ 3.328389] pci 0000:00:09.0: PCI bridge, secondary bus 0000:06
| [ 3.399095] pci 0000:00:09.0: IO window: disabled
| [ 3.457300] pci 0000:00:09.0: MEM window: disabled
| [ 3.516916] pci 0000:00:09.0: PREFETCH window: disabled
| [ 3.581113] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:07
| [ 3.651815] pci 0000:00:0a.0: IO window: disabled
| [ 3.710120] pci 0000:00:0a.0: MEM window: disabled
| [ 3.769659] pci 0000:00:0a.0: PREFETCH window: disabled
| [ 3.833831] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:08
| [ 3.904551] pci 0000:00:0b.0: IO window: disabled
| [ 3.962941] pci 0000:00:0b.0: MEM window: disabled
| [ 4.022404] pci 0000:00:0b.0: PREFETCH window: disabled
| [ 4.086675] NET: Registered protocol family 2
| [ 4.138864] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
| [ 4.228545] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
| [ 4.321456] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
| [ 4.400387] TCP: Hash tables configured (established 524288 bind 65536)
| [ 4.478496] TCP reno registered
| [ 4.516120] NET: Registered protocol family 1
| [ 4.568094] pci 0000:00:02.0: disabled boot interrupts on device [1166:0205]
| [ 5.061059] pci 0000:00:08.0: Found enabled HT MSI Mapping
| [ 5.124804] pci 0000:00:09.0: Found enabled HT MSI Mapping
| [ 5.190319] pci 0000:00:0a.0: Found enabled HT MSI Mapping
| [ 5.255845] pci 0000:00:0b.0: Found enabled HT MSI Mapping
| [ 5.321467] Unpacking initramfs...
| [ 5.617193] Freeing initrd memory: 6583k freed
| [ 5.675180] PCI-DMA: Disabling AGP.
| [ 5.714823] PCI-DMA: aperture base @ 20000000 size 65536 KB
| [ 5.789065] PCI-DMA: using GART IOMMU.
| [ 5.831946] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
| [ 5.909952] audit: initializing netlink socket (disabled)
| [ 5.973129] type=2000 audit(1276452171.972:1): initialized
| [ 6.039518] HugeTLB registered 2 MB page size, pre-allocated 0 pages
| [ 6.116743] VFS: Disk quotas dquot_6.5.2
| [ 6.161810] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
| [ 6.238527] msgmni has been set to 16010
| [ 6.285907] alg: No test for stdrng (krng)
| [ 6.334472] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
| [ 6.422844] io scheduler noop registered
| [ 6.469618] io scheduler anticipatory registered
| [ 6.524881] io scheduler deadline registered
| [ 6.575741] io scheduler cfq registered (default)
| [ 6.633636] Linux agpgart interface v0.103
| [ 6.680912] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 6.755599] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
| [ 6.826815] input: Macintosh mouse button emulation as /devices/virtual/input/input0
| [ 6.919167] PNP: No PS/2 controller found. Probing ports directly.
| [ 6.994550] serio: i8042 KBD port at 0x60,0x64 irq 1
| [ 7.052180] serio: i8042 AUX port at 0x60,0x64 irq 12
| [ 7.112301] mice: PS/2 mouse device common for all mice
| [ 7.174677] rtc_cmos 00:03: RTC can wake from S4
| [ 7.230064] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
| [ 7.302559] rtc0: alarms up to one year, y3k, 114 bytes nvram
| [ 7.371243] cpuidle: using governor ladder
| [ 7.420365] cpuidle: using governor menu
| [ 7.467170] No iBFT detected.
| [ 7.502574] TCP cubic registered
| [ 7.541141] NET: Registered protocol family 10
| [ 7.594685] lo: Disabled Privacy Extensions
| [ 7.643947] Mobile IPv6
| [ 7.672851] NET: Registered protocol family 17
| [ 7.726251] registered taskstats version 1
| [ 7.775402] rtc_cmos 00:03: setting system clock to 2010-06-13 18:03:12 UTC (1276452192)
| [ 7.871833] Initalizing network drop monitor service
| [ 7.931082] Freeing unused kernel memory: 584k freed
| [ 7.990720] Write protecting the kernel read-only data: 4192k
Loading, please wait...
| Begin: Loading essential drivers ... done.
| Begin: Running /scripts/init-premount ... [ 8.296762] SCSI subsystem initialized
| [ 8.398243] usbcore: registered new interface driver usbfs
| [ 8.432793] tg3.c:v3.102 (September 1, 2009)
| [ 8.432832] tg3 0000:04:04.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26
| [ 8.437666] Adaptec aacraid driver 1.1-5[2461]-ms
| [ 8.792814] aacraid 0000:03:02.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
| [ 8.792835] usbcore: registered new interface driver hub
| [ 8.792901] usbcore: registered new device driver usb
| [ 8.794714] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
| [ 8.796844] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
| [ 8.796846] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
| [ 9.511778] ACPI: PCI Interrupt Link [LNKU] enabled at IRQ 10
| [ 9.618080] ohci_hcd 0000:00:03.0: PCI INT A -> Link[LNKU] -> GSI 10 (level, low) -> IRQ 10
| [ 9.777453] eth0: Tigon3 [partno(BCM95780) rev 8003] (PCIX:133MHz:64-bit) MAC address 00:11:25:c4:5a:7c
| [ 9.950875] eth0: attached PHY is 5780 (10/100/1000Base-T Ethernet) (WireSpeed[1])
| [ 10.091713] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
| [ 10.210102] eth0: dma_rwctrl[76144000] dma_mask[40-bit]
| [ 10.306932] ohci_hcd 0000:00:03.0: OHCI Host Controller
| [ 10.403723] tg3 0000:04:04.1: PCI INT B -> GSI 27 (level, low) -> IRQ 27
| [ 10.528616] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
| [ 10.666273] ohci_hcd 0000:00:03.0: irq 10, io mem 0xe8011000
| [ 10.772038] IRQ 22/aacraid: IRQF_DISABLED is not guaranteed on shared IRQs
| [ 10.904339] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
| [ 11.029746] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
| [ 11.164203] usb usb1: Product: OHCI Host Controller
| [ 11.254558] usb usb1: Manufacturer: Linux 2.6.32-bpo.5-amd64 ohci_hcd
| [ 11.373770] usb usb1: SerialNumber: 0000:00:03.0
| [ 11.464606] eth1: Tigon3 [partno(BCM95780) rev 8003] (PCIX:133MHz:64-bit) MAC address 00:11:25:c4:5a:7d
| [ 11.638222] eth1: attached PHY is 5780 (10/100/1000Base-T Ethernet) (WireSpeed[1])
| [ 11.779057] eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
| [ 11.897451] eth1: dma_rwctrl[76144000] dma_mask[40-bit]
| [ 11.994366] usb usb1: configuration #1 chosen from 1 choice
| [ 12.097652] hub 1-0:1.0: USB hub found
| [ 12.167887] hub 1-0:1.0: 2 ports detected
| [ 12.242243] AAC0: kernel 4.1-0[8195]
| [ 12.310247] AAC0: monitor 4.1-0[8195]
| [ 12.378250] AAC0: bios 4.1-0[8195]
| [ 12.442288] AAC0: serial CB7060
| [ 12.500794] ehci_hcd 0000:00:03.2: PCI INT A -> Link[LNKU] -> GSI 10 (level, low) -> IRQ 10
| [ 12.655151] ehci_hcd 0000:00:03.2: EHCI Host Controller
| [ 12.751909] ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 2
| [ 12.889740] scsi0 : aacraid
| [ 12.942036] scsi 0:0:0:0: Direct-Access Adaptec 2410SA Mirror V1.0 PQ: 0 ANSI: 2
| [ 12.964032] ehci_hcd 0000:00:03.2: irq 10, io mem 0xe8013000
| [ 13.064026] usb 1-1: new low speed USB device using ohci_hcd and address 2
| [ 13.076031] ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00
| [ 13.076050] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
| [ 13.076052] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
| [ 13.076054] usb usb2: Product: EHCI Host Controller
| [ 13.076056] usb usb2: Manufacturer: Linux 2.6.32-bpo.5-amd64 ehci_hcd
| [ 13.076058] usb usb2: SerialNumber: 0000:00:03.2
| [ 13.076123] usb usb2: configuration #1 chosen from 1 choice
| [ 13.076154] hub 2-0:1.0: USB hub found
| [ 13.076161] hub 2-0:1.0: 4 ports detected
| [ 13.077204] scsi1 : pata_serverworks
| [ 13.077284] scsi2 : pata_serverworks
| [ 13.077542] ata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0x2000 irq 14
| [ 13.077544] ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0x2008 irq 15
| [ 13.077962] ohci_hcd 0000:00:03.1: PCI INT A -> Link[LNKU] -> GSI 10 (level, low) -> IRQ 10
| [ 13.133542] hub 1-0:1.0: unable to enumerate USB device on port 1
| [ 13.242395] ata1.00: ATAPI: HL-DT-ST GCR-8240N, 1.06, max UDMA/33
| [ 13.258398] ata1.00: configured for UDMA/33
| [ 13.258696] scsi: waiting for bus probes to complete ...
| [ 15.186129] ohci_hcd 0000:00:03.1: OHCI Host Controller
| [ 15.192881] scsi 0:1:2:0: Direct-Access Hitachi HDS721616PLA380 P22O PQ: 0 ANSI: 2
| [ 15.194040] scsi 0:1:3:0: Direct-Access Hitachi HDS721616PLA380 P22O PQ: 0 ANSI: 2
| [ 15.205792] scsi 1:0:0:0: CD-ROM HL-DT-ST CD-ROM GCR-8240N 1.06 PQ: 0 ANSI: 5
| [ 15.734234] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
| [ 15.741740] sd 0:0:0:0: [sda] 312497920 512-byte logical blocks: (159 GB/149 GiB)
| [ 15.741760] sd 0:0:0:0: [sda] Write Protect is off
| [ 15.741796] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
| [ 15.741976] sda: sda1 sda2 < sda5 sda6 sda7 >
| [ 16.352675] ohci_hcd 0000:00:03.1: irq 10, io mem 0xe8012000
| [ 16.352852] sd 0:0:0:0: [sda] Attached SCSI removable disk
| [ 16.360785] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
| [ 16.360789] Uniform CD-ROM driver Revision: 3.20
| [ 16.376192] sd 0:0:0:0: Attached scsi generic sg0 type 0
| [ 16.376981] scsi 0:1:2:0: Attached scsi generic sg1 type 0
| [ 16.377483] scsi 0:1:3:0: Attached scsi generic sg2 type 0
| [ 16.377944] sr 1:0:0:0: Attached scsi generic sg3 type 5
| [ 17.165591] hub 2-0:1.0: unable to enumerate USB device on port 1
| [ 17.224028] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
| [ 17.224031] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
| [ 17.224033] usb usb3: Product: OHCI Host Controller
| [ 17.224035] usb usb3: Manufacturer: Linux 2.6.32-bpo.5-amd64 ohci_hcd
| [ 17.224037] usb usb3: SerialNumber: 0000:00:03.1
| [ 17.224114] usb usb3: configuration #1 chosen from 1 choice
| [ 17.224142] hub 3-0:1.0: USB hub found
| [ 17.224155] hub 3-0:1.0: 2 ports detected
| [ 18.397022] usb 1-1: new low speed USB device using ohci_hcd and address 3
| done.
| Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.[ 18.602560] kjournald starting. Commit interval 5 seconds
|
| Begin: Running /scripts/local-[ 18.604050] EXT3-fs: mounted filesystem with ordered data mode.
| premount ... don[ 18.737372] usb 1-1: New USB device found, idVendor=0a81, idProduct=0205
| e.
| [ 18.737375] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
| [ 18.737378] usb 1-1: Product: PS2 to USB Converter
| [ 18.737380] usb 1-1: Manufacturer: CHESEN
| [ 18.737487] usb 1-1: configuration #1 chosen from 1 choice
| [ 18.763326] usbcore: registered new interface driver hiddev
| [ 18.769691] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:03.0/usb1/1-1/1-1:1.0/input/input1
| [ 18.769752] generic-usb 0003:0A81:0205.0001: input,hidraw0: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:03.0-1/input0
| [ 18.780775] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:03.0/usb1/1-1/1-1:1.1/input/input2
| [ 18.780880] generic-usb 0003:0A81:0205.0002: input,hidraw1: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:03.0-1/input1
| [ 18.780918] usbcore: registered new interface driver usbhid
| [ 18.780921] usbhid: v2.6:USB HID core driver
| Begin: Running /scripts/local-bottom ... done.
| done.
| Begin: Running /scripts/init-bottom ... done.
|
INIT: version 2.86 boot
| Starting the hotplug events dispatcher: udevd[ 22.031629] udevd version 125 started
| .
| Synthesizing the initial hotplug events...done.
| Waiting for /dev to be fully populated...[ 22.397974] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
| [ 22.406043] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:0c/PNP0C0C:00/input/input3
| [ 22.406053] ACPI: Power Button [PWRB]
| [ 22.406128] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
| [ 22.406131] ACPI: Power Button [PWRF]
| [ 22.478651] processor LNXCPU:00: registered as cooling_device0
| [ 22.478695] processor LNXCPU:01: registered as cooling_device1
| [ 22.478735] processor LNXCPU:02: registered as cooling_device2
| [ 22.478776] processor LNXCPU:03: registered as cooling_device3
| [ 22.488245] piix4_smbus 0000:00:02.0: SMBus Host Controller at 0x580, revision 0
| [ 22.767185] EDAC MC: Ver: 2.1.0 Jun 11 2010
| [ 22.795958] EDAC amd64_edac: Ver: 3.2.0 Jun 11 2010
| [ 22.837069] EDAC amd64: ECC is enabled by BIOS.
| [ 22.885443] EDAC amd64: ECC is enabled by BIOS.
| [ 23.030567] input: PC Speaker as /devices/platform/pcspkr/input/input5
| [ 23.147889] Error: Driver 'pcspkr' is already registered, aborting...
| [ 24.123378] EDAC MC0: Giving out device to 'amd64_edac' 'RevF': DEV 0000:00:18.2
| [ 24.261511] EDAC MC1: Giving out device to 'amd64_edac' 'RevF': DEV 0000:00:19.2
| [ 24.263146] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
| [ 24.523962] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
| [ 24.762703] Error: Driver 'pcspkr' is already registered, aborting...
| done.
| %@Setting parameters of disc: (none).
| Setting the system clock.
| Activating swap...[ 26.183109] Adding 1108444k swap on /dev/sda5. Priority:-1 extents:1 across:1108444k
| done.
| Checking root file system...fsck 1.41.3 (12-Oct-2008)
| /dev/sda1: clean, 80616/1269760 [ 26.695879] EXT3 FS on sda1, files, 668495/50internal journal
| 74524 blocks
| done.
| Setting the system clock.
| Cleaning up ifupdown....
| Loading kernel modules...[ 27.362393] uhci_hcd: USB Universal Host Controller Interface driver
| done.
| Checking file systems...fsck 1.41.3 (12-Oct-2008)
| /dev/sda7: clean, 3279703/8060928 files, 22104226/32220357 blocks
| /dev/sda6: clean, 14954/373152 files, 1028653/1490020 blocks
| done.
| Setting kernel variables (/etc/sysctl.conf)...done.
| Setting kernel variables (/etc/sysctl.[ 28.400650] kjournald starting. Commit interval 5 seconds
| d/mmap_min_addr.[ 28.524122] EXT3 FS on sda7, conf)...done.
| Minternal journal
| ounting local fi[ 28.632862] EXT3-fs: mounted filesystem with ordered data mode.
| lesystems...[ 28.803261] kjournald starting. Commit interval 5 seconds
| [ 28.905705] EXT3 FS on sda6, internal journal
| [ 28.987255] EXT3-fs: mounted filesystem with ordered data mode.
| done.
| Activating swapfile swap...done.
| Setting up networking....
| Configuring network interfaces...[ 29.954016] ADDRCONF(NETDEV_UP): eth0: link is not ready
| if-up.d/mountnfs[eth0]: waiting for interface eth0.221 before doing NFS mounts (warning).
| WARNING: Could not open /proc/net/vlan/config. Maybe you need [ 30.351860] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
| to load the 8021[ 30.496634] All bugs added by David S. Miller <davem@redhat.com>
| q module, or maybe you are not using PROCFS??
| Set name-type for VLAN subsystem.[ 30.676029] Virtual device eth0.221 asks to queue packet!
| Should be visib[ 30.802271] BUG: unable to handle kernel le in /proc/net/paging requestvlan/config
| Add at 00000000815eab98
| ed VLAN with VID[ 30.806244] IP: == 221 to IF -: [<ffffffff812b7581>] ip6_output2+0x2c/0x28b
| eth0:-
| [ 30.806244] PGD 0
| [ 30.806244] Thread overran stack, or stack corrupted
| [ 30.806244] Oops: 0000 [#1] SMP
| [ 30.806244] last sysfs file: /sys/devices/virtual/net/eth0.221/dev_id
| [ 30.806244] CPU 0
| [ 30.806244] Modules linked in: 8021q garp stp uhci_hcd shpchp tpm_tis tpm tpm_bios snd_pcsp psmouse snd_pcm snd_timer serio_raw snd soundcore snd_page_alloc amd64_edac_mod edac_core edac_mce_amd k8temp evdev processor i2c_piix4 i2c_core button pci_hotplug usbhid hid ext3 jbd mbcache sg sr_mod cdrom sd_mod crc_t10dif pata_serverworks ehci_hcd ohci_hcd ata_generic aacraid libata tg3 usbcore nls_base libphy scsi_mod thermal fan thermal_sys [last unloaded: scsi_wait_scan]
| [ 30.806244] Pid: 0, comm: swapper Not tainted 2.6.32-bpo.5-amd64 #1 IBM eServer 326m -[796966U]-
| [ 32.307829] tg3: eth0: Link is up at 1000 Mbps, full duplex.
| [ 32.307833] tg3: eth0: Flow control is on for TX and on for RX.
| [ 32.309540] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
| [ 30.806244] RIP: 0010:[<ffffffff812b7581>] [<ffffffff812b7581>] ip6_output2+0x2c/0x28b
| [ 30.806244] RSP: 0018:ffff880005403bf0 EFLAGS: 00010202
| [ 30.806244] RAX: ffff88011ef5c500 RBX: ffff88021e25e400 RCX: 00000000815eab80
| [ 30.806244] RDX: 0000000000000000 RSI: ffff880005403d18 RDI: ffff88011e7c0900
| [ 30.806244] RBP: ffff88011e7c0900 R08: 0000000000000000 R09: ffffffff8144b200
| [ 30.806244] R10: 000000009ad7942b R11: ffff88011ef5c500 R12: ffff88011e7c0900
| [ 30.806244] R13: ffff88021edec800 R14: ffffffff816763a0 R15: ffff880005403d20
| [ 30.806244] FS: 00007f3dc5f476e0(0000) GS:ffff880005400000(0000) knlGS:0000000000000000
| [ 30.806244] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
| [ 30.806244] CR2: 00000000815eab98 CR3: 0000000001001000 CR4: 00000000000006f0
| [ 30.806244] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
| [ 30.806244] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
| [ 30.806244] Process swapper (pid: 0, threadinfo ffffffff81422000, task ffffffff814571f0)
| [ 30.806244] Stack:
| [ 30.806244] ffff88021fac2f40 ffff88021e25e400 ffff88011e7c0900 ffff88011e7c0900
| [ 30.806244] <0> 0000000000000000 ffffffff812b853c 0000000000000000 ffff88021edec800
| [ 30.806244] <0> ffff880005403e20 0000000000000010 ffffffff8149d894 0000001081254a36
| [ 30.806244] Call Trace:
| [ 30.806244] <IRQ>
| [ 30.806244] [<ffffffff812b853c>] ? ip6_output+0xd5c/0xd74
| [ 30.806244] [<ffffffff812c6c55>] ? ndisc_send_skb+0x196/0x2d1
| [ 30.806244] [<ffffffff812c8333>] ? ndisc_send_ns+0x81/0xa3
| [ 30.806244] [<ffffffff8105aa26>] ? __mod_timer+0x141/0x153
| [ 30.806244] [<ffffffff812bbc6a>] ? addrconf_dad_timer+0x0/0x110
| [ 30.806244] [<ffffffff812bbd54>] ? addrconf_dad_timer+0xea/0x110
| [ 30.806244] [<ffffffff8105a257>] ? run_timer_softirq+0x1c9/0x268
| [ 30.806244] [<ffffffff810539d1>] ? __do_softirq+0xdd/0x1a0
| [ 30.806244] [<ffffffff81024d62>] ? lapic_next_event+0x18/0x1d
| [ 30.806244] [<ffffffff81011cac>] ? call_softirq+0x1c/0x30
| [ 30.806244] [<ffffffff81013903>] ? do_softirq+0x3f/0x7c
| [ 30.806244] [<ffffffff81053840>] ? irq_exit+0x36/0x76
| [ 30.806244] [<ffffffff81025827>] ? smp_apic_timer_interrupt+0x87/0x95
| [ 30.806244] [<ffffffff81011673>] ? apic_timer_interrupt+0x13/0x20
| [ 30.806244] <EOI>
| [ 30.806244] [<ffffffff8102c574>] ? native_safe_halt+0x2/0x3
| [ 30.806244] [<ffffffff81017cc5>] ? default_idle+0x34/0x51
| [ 30.806244] [<ffffffff8100feb1>] ? cpu_idle+0xa2/0xda
| [ 30.806244] [<ffffffff814e8140>] ? early_idt_handler+0x0/0x71
| [ 30.806244] [<ffffffff814e8cd1>] ? start_kernel+0x3dc/0x3e8
| [ 30.806244] [<ffffffff814e83b7>] ? x86_64_start_kernel+0xf9/0x106
| [ 30.806244] Code: 55 41 54 55 48 89 fd 53 48 83 ec 08 48 8b 47 28 8b 8f c0 00 00 00 48 03 8f d0 00 00 00 4c 8b 68 18 66 c7 47 7e 86 dd 4c 89 6f 20 <80> 79 18 ff 0f 85 01 02 00 00 48 8b 47 10 31 d2 48 85 c0 74 07
| [ 30.806244] RIP [<ffffffff812b7581>] ip6_output2+0x2c/0x28b
| [ 30.806244] RSP <ffff880005403bf0>
| [ 30.806244] CR2: 00000000815eab98
| [ 37.912810] ---[ end trace 92c25082da12cbfb ]---
| [ 37.999256] Kernel panic - not syncing: Fatal exception in interrupt
| [ 38.117663] Pid: 0, comm: swapper Tainted: G D 2.6.32-bpo.5-amd64 #1
| [ 38.248872] Call Trace:
| [ 38.294436] <IRQ> [<ffffffff812f8955>] ? panic+0x86/0x141
| [ 38.398449] [<ffffffff81011673>] ? apic_timer_interrupt+0x13/0x20
| [ 38.513696] [<ffffffff811b6ca1>] ? vgacon_cursor+0x0/0x140
| [ 38.616871] [<ffffffff81014a3b>] ? oops_end+0x64/0xb4
| [ 38.712909] [<ffffffff81014a7e>] ? oops_end+0xa7/0xb4
| [ 38.808962] [<ffffffff81032258>] ? no_context+0x1e9/0x1f8
| [ 38.911326] [<ffffffff8103240d>] ? __bad_area_nosemaphore+0x1a6/0x1ca
| [ 39.032941] [<ffffffff812fab85>] ? page_fault+0x25/0x30
| [ 39.132147] [<ffffffff812b7581>] ? ip6_output2+0x2c/0x28b
| [ 39.234598] [<ffffffff812b853c>] ? ip6_output+0xd5c/0xd74
| [ 39.336965] [<ffffffff812c6c55>] ? ndisc_send_skb+0x196/0x2d1
| [ 39.445774] [<ffffffff812c8333>] ? ndisc_send_ns+0x81/0xa3
| [ 39.548950] [<ffffffff8105aa26>] ? __mod_timer+0x141/0x153
| [ 39.652158] [<ffffffff812bbc6a>] ? addrconf_dad_timer+0x0/0x110
| [ 39.764199] [<ffffffff812bbd54>] ? addrconf_dad_timer+0xea/0x110
| [ 39.876980] [<ffffffff8105a257>] ? run_timer_softirq+0x1c9/0x268
| [ 39.989788] [<ffffffff810539d1>] ? __do_softirq+0xdd/0x1a0
| [ 40.092994] [<ffffffff81024d62>] ? lapic_next_event+0x18/0x1d
| [ 40.201838] [<ffffffff81011cac>] ? call_softirq+0x1c/0x30
| [ 40.304244] [<ffffffff81013903>] ? do_softirq+0x3f/0x7c
| [ 40.403457] [<ffffffff81053840>] ? irq_exit+0x36/0x76
| [ 40.499464] [<ffffffff81025827>] ? smp_apic_timer_interrupt+0x87/0x95
| [ 40.621081] [<ffffffff81011673>] ? apic_timer_interrupt+0x13/0x20
| [ 40.736281] <EOI> [<ffffffff8102c574>] ? native_safe_halt+0x2/0x3
| [ 40.853064] [<ffffffff81017cc5>] ? default_idle+0x34/0x51
| [ 40.955503] [<ffffffff8100feb1>] ? cpu_idle+0xa2/0xda
| [ 41.051513] [<ffffffff814e8140>] ? early_idt_handler+0x0/0x71
| [ 41.160319] [<ffffffff814e8cd1>] ? start_kernel+0x3dc/0x3e8
| [ 41.265927] [<ffffffff814e83b7>] ? x86_64_start_kernel+0xf9/0x106
and again:
| [ 0.000000] Initializing cgroup subsys cpu
| [ 0.000000] Linux version 2.6.32-bpo.5-amd64 (Debian 2.6.32-15~bpo50+1) (norbert@tretkowski.de) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP Fri Jun 11 08:42:31 UTC 2010
| [ 0.000000] Command line: root=/dev/sda1 ro console=tty0 console=ttyS0,9600n8
| [ 0.000000] KERNEL supported cpus:
| [ 0.000000] Intel GenuineIntel
| [ 0.000000] AMD AuthenticAMD
| [ 0.000000] Centaur CentaurHauls
| [ 0.000000] BIOS-provided physical RAM map:
| [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009a000 (usable)
| [ 0.000000] BIOS-e820: 000000000009a000 - 00000000000a0000 (reserved)
| [ 0.000000] BIOS-e820: 00000000000ce000 - 0000000000100000 (reserved)
| [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dff60000 (usable)
| [ 0.000000] BIOS-e820: 00000000dff60000 - 00000000dff70000 (ACPI data)
| [ 0.000000] BIOS-e820: 00000000dff70000 - 00000000dff80000 (ACPI NVS)
| [ 0.000000] BIOS-e820: 00000000dff80000 - 00000000e0000000 (reserved)
| [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec03000 (reserved)
| [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
| [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
| [ 0.000000] BIOS-e820: 0000000100000000 - 0000000220000000 (usable)
| [ 0.000000] DMI present.
| [ 0.000000] last_pfn = 0x220000 max_arch_pfn = 0x400000000
| [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
| [ 0.000000] last_pfn = 0xdff60 max_arch_pfn = 0x400000000
| [ 0.000000] init_memory_mapping: 0000000000000000-00000000dff60000
| [ 0.000000] init_memory_mapping: 0000000100000000-0000000220000000
| [ 0.000000] RAMDISK: 37982000 - 37fefec8
| [ 0.000000] ACPI: RSDP 00000000000f7540 00024 (v02 AMD )
| [ 0.000000] ACPI: XSDT 00000000dff6c1ca 00054 (v01 AMD XSDT 06040000 TFSM 00000000)
| [ 0.000000] ACPI: FACP 00000000dff6c316 000F4 (v03 AMD BLAST 06040000 MSFT 0200000B)
| [ 0.000000] ACPI: DSDT 00000000dff6c40a 038CA (v01 AMD BLAST 06040000 MSFT 0100000E)
| [ 0.000000] ACPI: FACS 00000000dff7bfc0 00040
| [ 0.000000] ACPI: SRAT 00000000dff6fcd4 00110 (v01 AMD HAMMER 06040000 AMD 00000001)
| [ 0.000000] ACPI: SSDT 00000000dff6fde4 0009D (v01 AMD BLAST 06040000 AMD 00000001)
| [ 0.000000] ACPI: SSDT 00000000dff6fe81 0009D (v01 AMD BLAST 06040000 AMD 00000001)
| [ 0.000000] ACPI: APIC 00000000dff6ff1e 00092 (v01 AMD BLAST 06040000 MSFT 0200000B)
| [ 0.000000] ACPI: SPCR 00000000dff6ffb0 00050 (v01 PTLTD $UCRTBL$ 06040000 PTL 00000001)
| [ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0
| [ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0
| [ 0.000000] SRAT: PXM 1 -> APIC 2 -> Node 1
| [ 0.000000] SRAT: PXM 1 -> APIC 3 -> Node 1
| [ 0.000000] SRAT: Node 0 PXM 0 0-a0000
| [ 0.000000] SRAT: Node 0 PXM 0 100000-e0000000
| [ 0.000000] SRAT: Node 0 PXM 0 100000000-120000000
| [ 0.000000] SRAT: Node 1 PXM 1 120000000-220000000
| [ 0.000000] Bootmem setup node 0 0000000000000000-0000000120000000
| [ 0.000000] NODE_DATA [0000000000015440 - 000000000001d43f]
| [ 0.000000] bootmap [000000000001e000 - 0000000000041fff] pages 24
| [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0120000000]
| [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
| [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
| [ 0.000000] #2 [0001000000 - 000167c314] TEXT DATA BSS ==> [0001000000 - 000167c314]
| [ 0.000000] #3 [0037982000 - 0037fefec8] RAMDISK ==> [0037982000 - 0037fefec8]
| [ 0.000000] #4 [000009a000 - 0000100000] BIOS reserved ==> [000009a000 - 0000100000]
| [ 0.000000] #5 [000167d000 - 000167d10c] BRK ==> [000167d000 - 000167d10c]
| [ 0.000000] #6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
| [ 0.000000] #7 [000000c000 - 0000011000] PGTABLE ==> [000000c000 - 0000011000]
| [ 0.000000] #8 [0000011000 - 0000015440] MEMNODEMAP ==> [0000011000 - 0000015440]
| [ 0.000000] Bootmem setup node 1 0000000120000000-0000000220000000
| [ 0.000000] NODE_DATA [0000000120000000 - 0000000120007fff]
| [ 0.000000] bootmap [0000000120008000 - 0000000120027fff] pages 20
| [ 0.000000] (9 early reservations) ==> bootmem [0120000000 - 0220000000]
| [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page
| [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE
| [ 0.000000] #2 [0001000000 - 000167c314] TEXT DATA BSS
| [ 0.000000] #3 [0037982000 - 0037fefec8] RAMDISK
| [ 0.000000] #4 [000009a000 - 0000100000] BIOS reserved
| [ 0.000000] #5 [000167d000 - 000167d10c] BRK
| [ 0.000000] #6 [0000008000 - 000000c000] PGTABLE
| [ 0.000000] #7 [000000c000 - 0000011000] PGTABLE
| [ 0.000000] #8 [0000011000 - 0000015440] MEMNODEMAP
| [ 0.000000] found SMP MP-table at [ffff8800000f75c0] f75c0
| [ 0.000000] [ffffea0003f00000-ffffea0003ffffff] potential offnode page_structs
| [ 0.000000] Zone PFN ranges:
| [ 0.000000] DMA 0x00000000 -> 0x00001000
| [ 0.000000] DMA32 0x00001000 -> 0x00100000
| [ 0.000000] Normal 0x00100000 -> 0x00220000
| [ 0.000000] Movable zone start PFN for each node
| [ 0.000000] early_node_map[4] active PFN ranges
| [ 0.000000] 0: 0x00000000 -> 0x0000009a
| [ 0.000000] 0: 0x00000100 -> 0x000dff60
| [ 0.000000] 0: 0x00100000 -> 0x00120000
| [ 0.000000] 1: 0x00120000 -> 0x00220000
| [ 0.000000] Detected use of extended apic ids on hypertransport bus
| [ 0.000000] Detected use of extended apic ids on hypertransport bus
| [ 0.000000] ACPI: PM-Timer IO Port: 0x508
| [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
| [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
| [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
| [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
| [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
| [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-15
| [ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec01000] gsi_base[16])
| [ 0.000000] IOAPIC[1]: apic_id 5, version 17, address 0xfec01000, GSI 16-31
| [ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec02000] gsi_base[32])
| [ 0.000000] IOAPIC[2]: apic_id 6, version 17, address 0xfec02000, GSI 32-47
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
| [ 0.000000] Using ACPI (MADT) for SMP configuration information
| [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
| [ 0.000000] PM: Registered nosave memory: 000000000009a000 - 00000000000a0000
| [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
| [ 0.000000] PM: Registered nosave memory: 00000000000ce000 - 0000000000100000
| [ 0.000000] PM: Registered nosave memory: 00000000dff60000 - 00000000dff70000
| [ 0.000000] PM: Registered nosave memory: 00000000dff70000 - 00000000dff80000
| [ 0.000000] PM: Registered nosave memory: 00000000dff80000 - 00000000e0000000
| [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000fec00000
| [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec03000
| [ 0.000000] PM: Registered nosave memory: 00000000fec03000 - 00000000fee00000
| [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
| [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff80000
| [ 0.000000] PM: Registered nosave memory: 00000000fff80000 - 0000000100000000
| [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1ec00000)
| [ 0.000000] Booting paravirtualized kernel on bare hardware
| [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:2
| [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880005400000 s90008 r8192 d20584 u1048576
| [ 0.000000] pcpu-alloc: s90008 r8192 d20584 u1048576 alloc=1*2097152
| [ 0.000000] pcpu-alloc: [0] 0 1 [1] 2 3
| [ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 2066308
| [ 0.000000] Policy zone: Normal
| [ 0.000000] Kernel command line: root=/dev/sda1 ro console=tty0 console=ttyS0,9600n8
| [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
| [ 0.000000] Initializing CPU#0
| [ 0.000000] Checking aperture...
| [ 0.000000] No AGP bridge found
| [ 0.000000] Node 0: aperture @ 20000000 size 32 MB
| [ 0.000000] Aperture pointing to e820 RAM. Ignoring.
| [ 0.000000] Your BIOS doesn't leave a aperture memory hole
| [ 0.000000] Please enable the IOMMU option in the BIOS setup
| [ 0.000000] This costs you 64 MB of RAM
| [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000
| [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
| [ 0.000000] Memory: 8190980k/8912896k available (3060k kernel code, 525336k absent, 196580k reserved, 1869k data, 584k init)
| [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=2
| [ 0.000000] Hierarchical RCU implementation.
| [ 0.000000] NR_IRQS:4352 nr_irqs:848
| [ 0.000000] Extended CMOS year: 2000
| [ 0.000000] Console: colour VGA+ 80x25
| [ 0.000000] console [tty0] enabled
| [ 0.000000] console [ttyS0] enabled
| [ 0.000000] Fast TSC calibration using PIT
| [ 0.000000] Detected 2194.471 MHz processor.
| [ 0.012005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4388.94 BogoMIPS (lpj=8777884)
| [ 0.020026] Security Framework initialized
| [ 0.024006] SELinux: Disabled at boot.
| [ 0.028721] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
| [ 0.038931] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
| [ 0.045347] Mount-cache hash table entries: 256
| [ 0.048175] Initializing cgroup subsys ns
| [ 0.052005] Initializing cgroup subsys cpuacct
| [ 0.056005] Initializing cgroup subsys devices
| [ 0.060004] Initializing cgroup subsys freezer
| [ 0.064003] Initializing cgroup subsys net_cls
| [ 0.068026] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
| [ 0.072003] CPU: L2 Cache: 1024K (64 bytes/line)
| [ 0.076003] CPU 0/0x0 -> Node 0
| [ 0.080005] CPU: Physical Processor ID: 0
| [ 0.084003] CPU: Processor Core ID: 0
| [ 0.088004] mce: CPU supports 5 MCE banks
| [ 0.092011] Performance Events: AMD PMU driver.
| [ 0.100005] ... version: 0
| [ 0.104004] ... bit width: 48
| [ 0.108003] ... generic registers: 4
| [ 0.112003] ... value mask: 0000ffffffffffff
| [ 0.116003] ... max period: 00007fffffffffff
| [ 0.120003] ... fixed-purpose events: 0
| [ 0.124003] ... event mask: 000000000000000f
| [ 0.132098] ACPI: Core revision 20090903
| [ 0.144067] Setting APIC routing to flat
| [ 0.148748] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
| [ 0.193254] CPU0: Dual Core AMD Opteron(tm) Processor 275 stepping 02
| [ 0.208001] Booting processor 1 APIC 0x1 ip 0x6000
| [ 0.016000] Initializing CPU#1
| [ 0.016000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
| [ 0.016000] CPU: L2 Cache: 1024K (64 bytes/line)
| [ 0.016000] CPU 1/0x1 -> Node 0
| [ 0.016000] CPU: Physical Processor ID: 0
| [ 0.016000] CPU: Processor Core ID: 1
| [ 0.300080] CPU1: Dual Core AMD Opteron(tm) Processor 275 stepping 02
| [ 0.312094] Booting processor 2 APIC 0x2 ip 0x6000
| [ 0.016000] Initializing CPU#2
| [ 0.016000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
| [ 0.016000] CPU: L2 Cache: 1024K (64 bytes/line)
| [ 0.016000] CPU 2/0x2 -> Node 1
| [ 0.016000] CPU: Physical Processor ID: 1
| [ 0.016000] CPU: Processor Core ID: 0
| [ 0.408045] CPU2: Dual Core AMD Opteron(tm) Processor 275 stepping 02
| [ 0.420086] Booting processor 3 APIC 0x3 ip 0x6000
| [ 0.016000] Initializing CPU#3
| [ 0.016000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
| [ 0.016000] CPU: L2 Cache: 1024K (64 bytes/line)
| [ 0.016000] CPU 3/0x3 -> Node 1
| [ 0.016000] CPU: Physical Processor ID: 1
| [ 0.016000] CPU: Processor Core ID: 1
| [ 0.516103] CPU3: Dual Core AMD Opteron(tm) Processor 275 stepping 02
| [ 0.528016] Brought up 4 CPUs
| [ 0.532004] Total of 4 processors activated (17556.72 BogoMIPS).
| [ 0.536738] devtmpfs: initialized
| [ 0.547086] regulator: core version 0.5
| [ 0.548061] NET: Registered protocol family 16
| [ 0.552109] run of slot in ranges
| [ 0.556004] TOM: 00000000e0000000 aka 3584M
| [ 0.560015] TOM2: 0000000220000000 aka 8704M
| [ 0.564027] ACPI: bus type pci registered
| [ 0.568063] PCI: Using configuration type 1 for base access
| [ 0.572537] bio: create slab <bio-0> at 0
| [ 0.582688] ACPI: Interpreter enabled
| [ 0.584006] ACPI: (supports S0 S4 S5)
| [ 0.600006] ACPI: Using IOAPIC for interrupt routing
| [ 0.613050] ACPI: No dock devices found.
| [ 0.616698] ACPI: PCI Root Bridge [PCI0] (0000:00)
| [ 0.620080] pci 0000:00:01.0: Enabling HT MSI Mapping
| [ 0.624520] pci 0000:00:03.2: PME# supported from D0 D1 D2 D3hot
| [ 0.628006] pci 0000:00:03.2: PME# disabled
| [ 0.632764] pci 0000:04:04.0: PME# supported from D3hot D3cold
| [ 0.636004] pci 0000:04:04.0: PME# disabled
| [ 0.640057] pci 0000:04:04.1: PME# supported from D3hot D3cold
| [ 0.644004] pci 0000:04:04.1: PME# disabled
| [ 0.653976] ACPI: PCI Root Bridge [PCI1] (0000:ff)
| [ 0.656164] ACPI: PCI Interrupt Link [LNKU] (IRQs *10 11)
| [ 0.672072] ACPI: PCI Interrupt Link [LNKW] (IRQs 10 11) *0, disabled.
| [ 0.693893] ACPI: PCI Interrupt Link [LNKS] (IRQs 5 7 10 11) *0, disabled.
| [ 0.720071] ACPI: PCI Interrupt Link [LN00] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 0.764099] ACPI: PCI Interrupt Link [LN01] (IRQs 3 4 *5 7 10 11 12 14 15)
| [ 0.798927] ACPI: PCI Interrupt Link [LN02] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 0.833891] ACPI: PCI Interrupt Link [LN03] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 0.870010] ACPI: PCI Interrupt Link [LN04] (IRQs 9 11) *0, disabled.
| [ 0.885865] ACPI: PCI Interrupt Link [LN05] (IRQs 9 11) *0, disabled.
| [ 0.904100] ACPI: PCI Interrupt Link [LN06] (IRQs 3 4 5 7 10 *11 12 14 15)
| [ 0.938894] ACPI: PCI Interrupt Link [LN07] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 0.973851] ACPI: PCI Interrupt Link [LN08] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.009874] ACPI: PCI Interrupt Link [LN09] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.045920] ACPI: PCI Interrupt Link [LN0A] (IRQs 3 4 5 *7 10 11 12 14 15)
| [ 1.076100] ACPI: PCI Interrupt Link [LN0B] (IRQs 3 4 5 7 *10 11 12 14 15)
| [ 1.109890] ACPI: PCI Interrupt Link [LN0C] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.145892] ACPI: PCI Interrupt Link [LN0D] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.184072] ACPI: PCI Interrupt Link [LN0E] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.228072] ACPI: PCI Interrupt Link [LN0F] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.268073] ACPI: PCI Interrupt Link [LN10] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.308073] ACPI: PCI Interrupt Link [LN11] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.348073] ACPI: PCI Interrupt Link [LN12] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.388073] ACPI: PCI Interrupt Link [LN13] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.425801] ACPI: PCI Interrupt Link [LN24] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.461852] ACPI: PCI Interrupt Link [LN15] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.497870] ACPI: PCI Interrupt Link [LN16] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.533898] ACPI: PCI Interrupt Link [LN17] (IRQs 3 4 5 7 10
| [ 1.544009] Clocksource tsc unstable (delta = 783814385 ns)
| [ 1.548005] 11 12 14 15) *0, disabled.
| [ 1.573897] ACPI: PCI Interrupt Link [LN18] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.609894] ACPI: PCI Interrupt Link [LN19] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.645632] ACPI: PCI Interrupt Link [LN1A] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.681839] ACPI: PCI Interrupt Link [LN1B] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.724073] ACPI: PCI Interrupt Link [LN1C] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.764074] ACPI: PCI Interrupt Link [LN1D] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.804074] ACPI: PCI Interrupt Link [LN1E] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.844074] ACPI: PCI Interrupt Link [LN1F] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
| [ 1.884092] vgaarb: device added: PCI:0000:00:04.0,decodes=io+mem,owns=io+mem,locks=none
| [ 1.888013] vgaarb: loaded
| [ 1.892044] PCI: Using ACPI for IRQ routing
| [ 1.900480] pnp: PnP ACPI init
| [ 1.904013] ACPI: bus type pnp registered
| [ 1.914282] pnp: PnP ACPI: found 9 devices
| [ 1.916006] ACPI: ACPI bus type pnp unregistered
| [ 1.920018] system 00:07: ioport range 0x40b-0x40b has been reserved
| [ 1.924006] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
| [ 1.928006] system 00:07: ioport range 0x4d6-0x4d6 has been reserved
| [ 1.932006] system 00:07: ioport range 0x500-0x560 has been reserved
| [ 1.936006] system 00:07: ioport range 0x558-0x55b has been reserved
| [ 1.940006] system 00:07: ioport range 0x580-0x58f has been reserved
| [ 1.944006] system 00:07: ioport range 0x590-0x593 has been reserved
| [ 1.948006] system 00:07: ioport range 0x600-0x61f has been reserved
| [ 1.952006] system 00:07: ioport range 0x620-0x623 has been reserved
| [ 1.956006] system 00:07: ioport range 0x700-0x703 has been reserved
| [ 1.960006] system 00:07: ioport range 0xc00-0xc01 has been reserved
| [ 1.964006] system 00:07: ioport range 0xc06-0xc08 has been reserved
| [ 1.968006] system 00:07: ioport range 0xc14-0xc14 has been reserved
| [ 1.972006] system 00:07: ioport range 0xc49-0xc4a has been reserved
| [ 1.976007] system 00:07: ioport range 0xc50-0xc53 has been reserved
| [ 1.980006] system 00:07: ioport range 0xc6c-0xc6c has been reserved
| [ 1.984006] system 00:07: ioport range 0xc6f-0xc6f has been reserved
| [ 1.988006] system 00:07: ioport range 0xcd6-0xcd7 has been reserved
| [ 1.992007] system 00:07: ioport range 0xcf9-0xcf9 could not be reserved
| [ 1.996006] system 00:07: ioport range 0xf50-0xf58 has been reserved
| [ 2.000007] system 00:07: ioport range 0xca2-0xca3 has been reserved
| [ 2.011779] Switching to clocksource acpi_pm
| [ 2.012220] pci 0000:01:0d.0: PCI bridge, secondary bus 0000:02
| [ 2.082416] pci 0000:01:0d.0: IO window: disabled
| [ 2.140611] pci 0000:01:0d.0: MEM window: disabled
| [ 2.200166] pci 0000:01:0d.0: PREFETCH window: disabled
| [ 2.264329] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
| [ 2.335222] pci 0000:00:01.0: IO window: disabled
| [ 2.393333] pci 0000:00:01.0: MEM window: disabled
| [ 2.452907] pci 0000:00:01.0: PREFETCH window: disabled
| [ 2.517141] pci 0000:00:06.0: PCI bridge, secondary bus 0000:03
| [ 2.587946] pci 0000:00:06.0: IO window: disabled
| [ 2.646049] pci 0000:00:06.0: MEM window: 0xe0000000-0xe00fffff
| [ 2.718858] pci 0000:00:06.0: PREFETCH window: 0x000000ec000000-0x000000efffffff
| [ 2.809681] pci 0000:00:07.0: PCI bridge, secondary bus 0000:04
| [ 2.880074] pci 0000:00:07.0: IO window: disabled
| [ 2.938374] pci 0000:00:07.0: MEM window: 0xe8100000-0xe81fffff
| [ 3.011284] pci 0000:00:07.0: PREFETCH window: disabled
| [ 3.075589] pci 0000:00:08.0: PCI bridge, secondary bus 0000:05
| [ 3.146392] pci 0000:00:08.0: IO window: disabled
| [ 3.204603] pci 0000:00:08.0: MEM window: disabled
| [ 3.264174] pci 0000:00:08.0: PREFETCH window: disabled
| [ 3.328408] pci 0000:00:09.0: PCI bridge, secondary bus 0000:06
| [ 3.399114] pci 0000:00:09.0: IO window: disabled
| [ 3.457325] pci 0000:00:09.0: MEM window: disabled
| [ 3.516916] pci 0000:00:09.0: PREFETCH window: disabled
| [ 3.581129] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:07
| [ 3.651835] pci 0000:00:0a.0: IO window: disabled
| [ 3.710038] pci 0000:00:0a.0: MEM window: disabled
| [ 3.769670] pci 0000:00:0a.0: PREFETCH window: disabled
| [ 3.833853] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:08
| [ 3.904561] pci 0000:00:0b.0: IO window: disabled
| [ 3.962859] pci 0000:00:0b.0: MEM window: disabled
| [ 4.022399] pci 0000:00:0b.0: PREFETCH window: disabled
| [ 4.086896] NET: Registered protocol family 2
| [ 4.138893] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
| [ 4.228570] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
| [ 4.321728] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
| [ 4.400600] TCP: Hash tables configured (established 524288 bind 65536)
| [ 4.478713] TCP reno registered
| [ 4.516245] NET: Registered protocol family 1
| [ 4.568209] pci 0000:00:02.0: disabled boot interrupts on device [1166:0205]
| [ 5.061059] pci 0000:00:08.0: Found enabled HT MSI Mapping
| [ 5.124899] pci 0000:00:09.0: Found enabled HT MSI Mapping
| [ 5.190426] pci 0000:00:0a.0: Found enabled HT MSI Mapping
| [ 5.255948] pci 0000:00:0b.0: Found enabled HT MSI Mapping
| [ 5.321578] Unpacking initramfs...
| [ 5.617280] Freeing initrd memory: 6583k freed
| [ 5.675292] PCI-DMA: Disabling AGP.
| [ 5.714861] PCI-DMA: aperture base @ 20000000 size 65536 KB
| [ 5.789079] PCI-DMA: using GART IOMMU.
| [ 5.831944] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
| [ 5.910073] audit: initializing netlink socket (disabled)
| [ 5.973149] type=2000 audit(1276452689.972:1): initialized
| [ 6.039512] HugeTLB registered 2 MB page size, pre-allocated 0 pages
| [ 6.116746] VFS: Disk quotas dquot_6.5.2
| [ 6.161815] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
| [ 6.238553] msgmni has been set to 16010
| [ 6.285898] alg: No test for stdrng (krng)
| [ 6.334475] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
| [ 6.422845] io scheduler noop registered
| [ 6.469617] io scheduler anticipatory registered
| [ 6.524746] io scheduler deadline registered
| [ 6.575742] io scheduler cfq registered (default)
| [ 6.633749] Linux agpgart interface v0.103
| [ 6.680804] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 6.755519] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
| [ 6.826769] input: Macintosh mouse button emulation as /devices/virtual/input/input0
| [ 6.919024] PNP: No PS/2 controller found. Probing ports directly.
| [ 6.994441] serio: i8042 KBD port at 0x60,0x64 irq 1
| [ 7.052085] serio: i8042 AUX port at 0x60,0x64 irq 12
| [ 7.112220] mice: PS/2 mouse device common for all mice
| [ 7.174594] rtc_cmos 00:03: RTC can wake from S4
| [ 7.229958] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
| [ 7.302478] rtc0: alarms up to one year, y3k, 114 bytes nvram
| [ 7.371061] cpuidle: using governor ladder
| [ 7.420261] cpuidle: using governor menu
| [ 7.467066] No iBFT detected.
| [ 7.502541] TCP cubic registered
| [ 7.541048] NET: Registered protocol family 10
| [ 7.594573] lo: Disabled Privacy Extensions
| [ 7.643863] Mobile IPv6
| [ 7.672669] NET: Registered protocol family 17
| [ 7.726145] registered taskstats version 1
| [ 7.775303] rtc_cmos 00:03: setting system clock to 2010-06-13 18:11:50 UTC (1276452710)
| [ 7.871732] Initalizing network drop monitor service
| [ 7.930978] Freeing unused kernel memory: 584k freed
| [ 7.990602] Write protecting the kernel read-only data: 4192k
Loading, please wait...
| Begin: Loading essential drivers ... done.
| Begin: Running /scripts/init-premount ... [ 8.339244] SCSI subsystem initialized
| [ 8.410744] usbcore: registered new interface driver usbfs
| [ 8.411107] tg3.c:v3.102 (September 1, 2009)
| [ 8.411142] tg3 0000:04:04.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26
| [ 8.432620] Adaptec aacraid driver 1.1-5[2461]-ms
| [ 8.805255] aacraid 0000:03:02.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
| [ 8.805345] usbcore: registered new interface driver hub
| [ 8.805397] usbcore: registered new device driver usb
| [ 8.807529] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
| [ 8.809308] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
| [ 9.363893] ACPI: PCI Interrupt Link [LNKU] enabled at IRQ 10
| [ 9.470036] ehci_hcd 0000:00:03.2: PCI INT A -> Link[LNKU] -> GSI 10 (level, low) -> IRQ 10
| [ 9.624496] ehci_hcd 0000:00:03.2: EHCI Host Controller
| [ 9.721278] ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1
| [ 9.872801] eth0: Tigon3 [partno(BCM95780) rev 8003] (PCIX:133MHz:64-bit) MAC address 00:11:25:c4:5a:7c
| [ 10.046503] eth0: attached PHY is 5780 (10/100/1000Base-T Ethernet) (WireSpeed[1])
| [ 10.187339] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
| [ 10.305730] eth0: dma_rwctrl[76144000] dma_mask[40-bit]
| [ 10.402529] ehci_hcd 0000:00:03.2: irq 10, io mem 0xe8013000
| [ 10.508191] tg3 0000:04:04.1: PCI INT B -> GSI 27 (level, low) -> IRQ 27
| [ 10.640186] ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00
| [ 10.746806] IRQ 22/aacraid: IRQF_DISABLED is not guaranteed on shared IRQs
| [ 10.878941] eth1: Tigon3 [partno(BCM95780) rev 8003] (PCIX:133MHz:64-bit) MAC address 00:11:25:c4:5a:7d
| [ 11.052594] eth1: attached PHY is 5780 (10/100/1000Base-T Ethernet) (WireSpeed[1])
| [ 11.193426] eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
| [ 11.311816] eth1: dma_rwctrl[76144000] dma_mask[40-bit]
| [ 11.408632] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
| [ 11.534208] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
| [ 11.668666] usb usb1: Product: EHCI Host Controller
| [ 11.759017] usb usb1: Manufacturer: Linux 2.6.32-bpo.5-amd64 ehci_hcd
| [ 11.878234] usb usb1: SerialNumber: 0000:00:03.2
| [ 11.964786] usb usb1: configuration #1 chosen from 1 choice
| [ 12.068064] hub 1-0:1.0: USB hub found
| [ 12.138334] hub 1-0:1.0: 4 ports detected
| [ 12.212659] AAC0: kernel 4.1-0[8195]
| [ 12.280664] AAC0: monitor 4.1-0[8195]
| [ 12.348664] AAC0: bios 4.1-0[8195]
| [ 12.412703] AAC0: serial CB7060
| [ 12.471241] ohci_hcd 0000:00:03.0: PCI INT A -> Link[LNKU] -> GSI 10 (level, low) -> IRQ 10
| [ 12.625574] ohci_hcd 0000:00:03.0: OHCI Host Controller
| [ 12.722324] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
| [ 12.860143] scsi0 : aacraid
| [ 12.912039] ohci_hcd 0000:00:03.0: irq 10, io mem 0xe8011000
| [ 13.018285] scsi 0:0:0:0: Direct-Access Adaptec 2410SA Mirror V1.0 PQ: 0 ANSI: 2
| [ 13.076042] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
| [ 13.076044] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
| [ 13.076047] usb usb2: Product: OHCI Host Controller
| [ 13.076048] usb usb2: Manufacturer: Linux 2.6.32-bpo.5-amd64 ohci_hcd
| [ 13.076050] usb usb2: SerialNumber: 0000:00:03.0
| [ 13.076111] usb usb2: configuration #1 chosen from 1 choice
| [ 13.076137] hub 2-0:1.0: USB hub found
| [ 13.076151] hub 2-0:1.0: 2 ports detected
| [ 13.076438] scsi1 : pata_serverworks
| [ 13.076506] scsi2 : pata_serverworks
| [ 13.076723] ata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0x2000 irq 14
| [ 13.076725] ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0x2008 irq 15
| [ 13.076823] ohci_hcd 0000:00:03.1: PCI INT A -> Link[LNKU] -> GSI 10 (level, low) -> IRQ 10
| [ 13.241375] ata1.00: ATAPI: HL-DT-ST GCR-8240N, 1.06, max UDMA/33
| [ 13.257378] ata1.00: configured for UDMA/33
| [ 13.257672] scsi: waiting for bus probes to complete ...
| [ 14.809709] ohci_hcd 0000:00:03.1: OHCI Host Controller
| [ 14.816320] scsi 0:1:2:0: Direct-Access Hitachi HDS721616PLA380 P22O PQ: 0 ANSI: 2
| [ 14.817494] scsi 0:1:3:0: Direct-Access Hitachi HDS721616PLA380 P22O PQ: 0 ANSI: 2
| [ 14.829351] scsi 1:0:0:0: CD-ROM HL-DT-ST CD-ROM GCR-8240N 1.06 PQ: 0 ANSI: 5
| [ 15.357818] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
| [ 15.364788] sd 0:0:0:0: [sda] 312497920 512-byte logical blocks: (159 GB/149 GiB)
| [ 15.364808] sd 0:0:0:0: [sda] Write Protect is off
| [ 15.364844] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
| [ 15.365012] sda: sda1
| [ 15.925821] ohci_hcd 0000:00:03.1: irq 10, io mem 0xe8012000
| [ 15.984026] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
| [ 15.984029] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
| [ 15.984031] usb usb3: Product: OHCI Host Controller
| [ 15.984033] usb usb3: Manufacturer: Linux 2.6.32-bpo.5-amd64 ohci_hcd
| [ 15.984035] usb usb3: SerialNumber: 0000:00:03.1
| [ 15.984102] usb usb3: configuration #1 chosen from 1 choice
| [ 15.984129] hub 3-0:1.0: USB hub found
| [ 15.984141] hub 3-0:1.0: 2 ports detected
| [ 16.100024] usb 2-1: new low speed USB device using ohci_hcd and address 2
| [ 16.313077] usb 2-1: New USB device found, idVendor=0a81, idProduct=0205
| [ 16.313080] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
| [ 16.313083] usb 2-1: Product: PS2 to USB Converter
| [ 16.313085] usb 2-1: Manufacturer: CHESEN
| [ 16.313176] usb 2-1: configuration #1 chosen from 1 choice
| [ 17.500348] sda2 < sda5 sda6 sda7 >
| [ 17.610654] sd 0:0:0:0: [sda] Attached SCSI removable disk
| [ 17.721264] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
| [ 17.738513] usbcore: registered new interface driver hiddev
| [ 17.744367] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:03.0/usb2/2-1/2-1:1.0/input/input1
| [ 17.744430] generic-usb 0003:0A81:0205.0001: input,hidraw0: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:03.0-1/input0
| [ 17.754473] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:03.0/usb2/2-1/2-1:1.1/input/input2
| [ 17.754565] generic-usb 0003:0A81:0205.0002: input,hidraw1: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:03.0-1/input1
| [ 17.754598] usbcore: registered new interface driver usbhid
| [ 17.754601] usbhid: v2.6:USB HID core driver
| [ 18.965324] Uniform CD-ROM driver Revision: 3.20
| [ 19.061189] sd 0:0:0:0: Attached scsi generic sg0 type 0
| [ 19.160617] scsi 0:1:2:0: Attached scsi generic sg1 type 0
| [ 19.262947] scsi 0:1:3:0: Attached scsi generic sg2 type 0
| [ 19.365355] sr 1:0:0:0: Attached scsi generic sg3 type 5
| done.
| Begin: Mounting root file system ... Begin: Running /scripts/loc[ 19.577478] kjournald starting. Commit interval 5 seconds
| al-top ... done.
| Begin: Running[ 19.577490] EXT3-fs: mounted filesystem with ordered data mode.
| /scripts/local-premount ... done.
| Begin: Running /scripts/local-bottom ... done.
| done.
| Begin: Running /scripts/init-bottom ... done.
|
INIT: version 2.86 boot
| Starting the hotplug events dispatcher: udevd[ 21.397308] udevd version 125 started
| .
| Synthesizing the initial hotplug events...done.
| Waiting for /dev to be fully populated...[ 21.801761] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
| [ 21.840396] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:0c/PNP0C0C:00/input/input3
| [ 21.840404] ACPI: Power Button [PWRB]
| [ 21.840475] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
| [ 21.840478] ACPI: Power Button [PWRF]
| [ 21.841049] piix4_smbus 0000:00:02.0: SMBus Host Controller at 0x580, revision 0
| [ 22.546347] processor LNXCPU:00: registered as cooling_device0
| [ 22.555648] EDAC MC: Ver: 2.1.0 Jun 11 2010
| [ 22.572636] EDAC amd64_edac: Ver: 3.2.0 Jun 11 2010
| [ 22.600034] EDAC amd64: ECC is enabled by BIOS.
| [ 22.909691] EDAC amd64: ECC is enabled by BIOS.
| [ 22.912736] processor LNXCPU:01: registered as cooling_device1
| [ 22.913956] processor LNXCPU:02: registered as cooling_device2
| [ 22.915019] processor LNXCPU:03: registered as cooling_device3
| [ 22.955956] input: PC Speaker as /devices/platform/pcspkr/input/input5
| [ 22.970620] Error: Driver 'pcspkr' is already registered, aborting...
| [ 23.568612] EDAC MC0: Giving out device to 'amd64_edac' 'RevF': DEV 0000:00:18.2
| [ 23.572591] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
| [ 23.830945] EDAC MC1: Giving out device to 'amd64_edac' 'RevF': DEV 0000:00:19.2
| [ 23.968565] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
| done.
| %@Setting parameters of disc: (none).
| Setting the system clock.
| Activating swap...[ 25.182811] Adding 1108444k swap on /dev/sda5. Priority:-1 extents:1 across:1108444k
| done.
| Checking root file system...fsck 1.41.3 (12-Oct-2008)
| /dev/sda1: clean, 80616/1269760 [ 25.704022] EXT3 FS on sda1, files, 668495/50internal journal
| 74524 blocks
| done.
| Setting the system clock.
| Cleaning up ifupdown....
| Loading kernel modules...[ 26.378145] uhci_hcd: USB Universal Host Controller Interface driver
| done.
| Checking file systems...fsck 1.41.3 (12-Oct-2008)
| /dev/sda7: clean, 3279703/8060928 files, 22104226/32220357 blocks
| /dev/sda6: clean, 14954/373152 files, 1028741/1490020 blocks
| done.
| Setting kernel variables (/etc/sysctl.conf)...done.
| Setting kernel variables (/etc/sysctl.[ 27.450338] kjournald starting. Commit interval 5 seconds
| d/mmap_min_addr.conf)...done.
| M[ 27.574447] EXT3 FS on sda7, ounting local fiinternal journal
| lesystems...[ 27.699196] EXT3-fs: mounted filesystem with ordered data mode.
| [ 27.836307] kjournald starting. Commit interval 5 seconds
| [ 27.837527] EXT3 FS on sda6, internal journal
| [ 27.837534] EXT3-fs: mounted filesystem with ordered data mode.
| done.
| Activating swapfile swap...done.
| Setting up networking....
| Configuring network interfaces...[ 29.082014] ADDRCONF(NETDEV_UP): eth0: link is not ready
| if-up.d/mountnfs[eth0]: waiting for interface eth0.221 before doing NFS mounts (warning).
| WARNING: Could not open /proc/net/vlan/config. Maybe you need [ 29.488017] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
| to load the 8021[ 29.635376] All bugs added by David S. Miller <davem@redhat.com>
| q module, or maybe you are not using PROCFS??
| Set name-type for VLAN subsystem.[ 29.816041] Virtual device eth0.221 asks to queue packet!
| Should be visible in /proc/net/vlan/config
| Added VLAN with VID == 221 to IF -:eth0:-
| done.
| Starting portmap daemon....
| [ 30.088052] BUG: unable to handle kernel NULL pointer dereference at 0000000000000220
| [ 30.092010] IP: [<ffffffff8125ee90>] eth_header_cache+0x19/0x43
| [ 30.092010] PGD 0
| [ 30.092010] Thread overran stack, or stack corrupted
| [ 30.092010] Oops: 0000 [#1] SMP
| [ 30.092010] last sysfs file: /sys/devices/virtual/net/eth0.221/dev_id
| [ 30.092010] CPU 0
| [ 30.092010] Modules linked in: 8021q garp stp uhci_hcd psmouse pcspkr shpchp amd64_edac_mod edac_core edac_mce_amd processor tpm_tis tpm tpm_bios serio_raw snd_pcm snd_timer snd soundcore snd_page_alloc k8temp evdev button i2c_piix4 pci_hotplug i2c_core ext3 jbd mbcache sg usbhid hid sr_mod cdrom sd_mod crc_t10dif pata_serverworks ohci_hcd ehci_hcd ata_generic aacraid libata tg3 libphy usbcore nls_base scsi_mod thermal fan thermal_sys [last unloaded: scsi_wait_scan]
| [ 30.092010] Pid: 0, comm: swapper Not tainted 2.6.32-bpo.5-amd64 #1 IBM eServer 326m -[796966U]-
| [ 31.520120] tg3: eth0: Link is up at 1000 Mbps, full duplex.
| [ 31.520123] tg3: eth0: Flow control is on for TX and on for RX.
| [ 31.521855] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
| [ 30.092010] RIP: 0010:[<ffffffff8125ee90>] [<ffffffff8125ee90>] eth_header_cache+0x19/0x43
| [ 30.092010] RSP: 0018:ffff880005403bc8 EFLAGS: 00010282
| [ 30.092010] RAX: 00000000ffffffff RBX: ffff88011e007400 RCX: ffff88011e00745a
| [ 30.092010] RDX: 000000000000dd86 RSI: ffff88011e007400 RDI: ffff88011e007400
| [ 30.092010] RBP: ffff88011e007600 R08: 0000000000000000 R09: ffff88011fa45960
| [ 30.092010] R10: 00000000a6bc8aa7 R11: ffffffff81253f61 R12: ffff88011e007400
| [ 30.092010] R13: ffff88011da74500 R14: ffffffff8167dd86 R15: ffff88021e6da800
| [ 30.092010] FS: 00007f49db5196e0(0000) GS:ffff880005400000(0000) knlGS:0000000000000000
| [ 30.092010] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
| [ 30.092010] CR2: 0000000000000220 CR3: 0000000001001000 CR4: 00000000000006f0
| [ 30.092010] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
| [ 30.092010] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
| [ 30.092010] Process swapper (pid: 0, threadinfo ffffffff81422000, task ffffffff814571f0)
| [ 30.092010] Stack:
| [ 30.092010] ffffffff8125408a ffff88011da74500 ffff88011e007440 ffff88021e6da800
| [ 30.092010] <0> ffff88021e6d1c00 ffff88011e007600 ffff88011e007600 0000000000000000
| [ 30.092010] <0> ffffffff816763a0 ffff880005403d20 ffffffff812b853c 0000000000000000
| [ 30.092010] Call Trace:
| [ 30.092010] <IRQ>
| [ 30.092010] [<ffffffff8125408a>] ? neigh_resolve_output+0x129/0x284
| [ 30.092010] [<ffffffff812b853c>] ? ip6_output+0xd5c/0xd74
| [ 30.092010] [<ffffffff812c6c55>] ? ndisc_send_skb+0x196/0x2d1
| [ 30.092010] [<ffffffff812c8333>] ? ndisc_send_ns+0x81/0xa3
| [ 30.092010] [<ffffffff8105aa26>] ? __mod_timer+0x141/0x153
| [ 30.092010] [<ffffffff812bbc6a>] ? addrconf_dad_timer+0x0/0x110
| [ 30.092010] [<ffffffff812bbd54>] ? addrconf_dad_timer+0xea/0x110
| [ 30.092010] [<ffffffff81017086>] ? native_sched_clock+0x2e/0x66
| [ 30.092010] [<ffffffff8105a257>] ? run_timer_softirq+0x1c9/0x268
| [ 30.092010] [<ffffffff810539d1>] ? __do_softirq+0xdd/0x1a0
| [ 30.092010] [<ffffffff81024d62>] ? lapic_next_event+0x18/0x1d
| [ 30.092010] [<ffffffff81011cac>] ? call_softirq+0x1c/0x30
| [ 30.092010] [<ffffffff81013903>] ? do_softirq+0x3f/0x7c
| [ 30.092010] [<ffffffff81053840>] ? irq_exit+0x36/0x76
| [ 30.092010] [<ffffffff81025827>] ? smp_apic_timer_interrupt+0x87/0x95
| [ 30.092010] [<ffffffff81011673>] ? apic_timer_interrupt+0x13/0x20
| [ 30.092010] <EOI>
| [ 30.092010] [<ffffffff8102c574>] ? native_safe_halt+0x2/0x3
| [ 30.092010] [<ffffffff81017cc5>] ? default_idle+0x34/0x51
| [ 30.092010] [<ffffffff8100feb1>] ? cpu_idle+0xa2/0xda
| [ 30.092010] [<ffffffff814e8140>] ? early_idt_handler+0x0/0x71
| [ 30.092010] [<ffffffff814e8cd1>] ? start_kernel+0x3dc/0x3e8
| [ 30.092010] [<ffffffff814e83b7>] ? x86_64_start_kernel+0xf9/0x106
| [ 30.092010] Code: ff ff ff c3 8b 02 89 47 5a 66 8b 42 04 66 89 47 5e c3 8b 56 40 83 c8 ff 4c 8b 47 18 66 81 fa 00 01 74 31 48 8d 4e 5a 66 89 51 0c <49> 8b 90 20 02 00 00 8b 02 89 46 60 66 8b 42 04 66 89 46 64 8b
| [ 30.092010] RIP [<ffffffff8125ee90>] eth_header_cache+0x19/0x43
| [ 30.092010] RSP <ffff880005403bc8>
| [ 30.092010] CR2: 0000000000000220
| [ 32.696218] ---[ end trace e534d6dabe6cc917 ]---
| [ 32.782652] Kernel panic - not syncing: Fatal exception in interrupt
| [ 32.901065] Pid: 0, comm: swapper Tainted: G D 2.6.32-bpo.5-amd64 #1
| [ 34.301518] BUG: unable to handle kernel NULL pointer dereference at 0000000000000078
| [ 34.301518] IP: [<ffffffff812c5891>] ndisc_hash+0x1a/0x8c
| [ 34.301518] PGD 11e06f067 PUD 11e8b8067 PMD 0
| [ 34.301518] Oops: 0000 [#2] SMP
| [ 34.301518] last sysfs file: /sys/devices/virtual/net/eth0.221/dev_id
| [ 34.301518] CPU 3
| [ 34.301518] Modules linked in: 8021q garp stp uhci_hcd psmouse pcspkr shpchp amd64_edac_mod edac_core edac_mce_amd processor tpm_tis tpm tpm_bios serio_raw snd_pcm snd_timer snd soundcore snd_page_alloc k8temp evdev button i2c_piix4 pci_hotplug i2c_core ext3 jbd mbcache sg usbhid hid sr_mod cdrom
[power cycled]
Reply to: