Bug#583924: linux-image-2.6.32-5-amd64: udevd-work and kernel names disagree
Package: linux-2.6
Version: 2.6.32-14
Severity: minor
Tags: sid squeeze
I keep getting this message at boot time:
udevd-work[377]: kernel-provided name 'uinput' and NAME= 'input/uinput'
disagree, please use SYMLINK+= or change the kernel to provide the proper name
For a similar bug: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=582639, the
udev mantainer said this was a kernel bug. For this reason I'm reporting it
here.
-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-14) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Sun May 30 17:20:42 UTC 2010
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=43c718d2-f969-4312-b0c2-91544a2b744f ro quiet
** Not tainted
** Kernel log:
[ 4.536359] processor LNXCPU:00: registered as cooling_device0
[ 4.536795] Switching to clocksource acpi_pm
[ 4.614937] ACPI: AC Adapter [ACAD] (on-line)
[ 4.615168] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[ 4.615298] ACPI: Lid Switch [LID]
[ 4.615711] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[ 4.615788] ACPI: Power Button [PWRB]
[ 4.615895] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 4.615945] ACPI: Power Button [PWRF]
[ 4.616447] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input7
[ 4.616509] ACPI: Sleep Button [SLPF]
[ 4.749441] ACPI: Battery Slot [BAT1] (battery present)
[ 4.850769] EDAC MC: Ver: 2.1.0 May 30 2010
[ 4.863336] EDAC amd64_edac: Ver: 3.2.0 May 30 2010
[ 4.863409] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
[ 4.863414] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 4.863416] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 4.863417] (Note that use of the override may cause unknown side effects.)
[ 4.863433] amd64_edac: probe of 0000:00:18.2 failed with error -22
[ 4.880191] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8400, revision 0
[ 4.917930] b43-phy0: Broadcom 4318 WLAN found (core revision 9)
[ 4.940918] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 5.105757] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000/0x0
[ 5.136527] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:0e/LNXVIDEO:00/input/input8
[ 5.136605] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 5.143622] ACPI: WMI: Mapper loaded
[ 5.150511] yenta_cardbus 0000:06:04.0: CardBus bridge found [103c:30a4]
[ 5.150536] yenta_cardbus 0000:06:04.0: Enabling burst memory read transactions
[ 5.150543] yenta_cardbus 0000:06:04.0: Using INTVAL to route CSC interrupts to PCI
[ 5.150545] yenta_cardbus 0000:06:04.0: Routing CardBus interrupts to ISA
[ 5.150552] yenta_cardbus 0000:06:04.0: TI: mfunc 0x00a61b22, devctl 0x64
[ 5.156492] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.180902] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
[ 5.217336] [drm] Initialized drm 1.1.0 20060810
[ 5.380923] yenta_cardbus 0000:06:04.0: ISA IRQ mask 0x0ef8, PCI irq 20
[ 5.380929] yenta_cardbus 0000:06:04.0: Socket status: 30000006
[ 5.380937] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
[ 5.380941] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xc02fffff
[ 5.380944] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x83ffffff
[ 5.420961] phy0: Selected rate control algorithm 'minstrel'
[ 5.421639] Registered led device: b43-phy0::radio
[ 5.421710] Broadcom 43xx driver loaded [ Features: PMLS, Firmware-ID: FW13 ]
[ 5.638680] tifm_7xx1 0000:06:04.3: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[ 5.861005] pci 0000:01:05.0: power state changed by ACPI to D0
[ 5.861014] pci 0000:01:05.0: power state changed by ACPI to D0
[ 5.861023] pci 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 5.861222] [drm] Initialized radeon 1.32.0 20080528 for 0000:01:05.0 on minor 0
[ 6.334742] ATI IXP AC97 controller 0000:00:14.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 6.361748] ATI IXP MC97 controller 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 6.472078] MC'97 0 converters and GPIO not ready (0x1)
[ 7.041359] Adding 2441840k swap on /dev/sda5. Priority:-1 extents:1 across:2441840k
[ 7.413482] loop: module loaded
[ 7.731940] EXT4-fs (sda6): mounted filesystem with ordered data mode
[ 8.841093] fuse init (API version 7.13)
[ 9.583174] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input10
[ 11.596076] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[ 11.673904] b43 ssb0:0: firmware: requesting b43/pcm5.fw
[ 11.680420] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
[ 11.683717] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
[ 11.804059] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[ 11.876273] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 11.878683] eth0: link down
[ 11.879077] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.146011] Bluetooth: Core ver 2.15
[ 13.146078] NET: Registered protocol family 31
[ 13.146080] Bluetooth: HCI device and connection manager initialized
[ 13.146083] Bluetooth: HCI socket layer initialized
[ 13.173353] Bluetooth: L2CAP ver 2.14
[ 13.173356] Bluetooth: L2CAP socket layer initialized
[ 13.308663] lp: driver loaded but no devices found
[ 13.325356] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 13.325359] Bluetooth: BNEP filters: protocol multicast
[ 13.361363] Bluetooth: RFCOMM TTY layer initialized
[ 13.361368] Bluetooth: RFCOMM socket layer initialized
[ 13.361370] Bluetooth: RFCOMM ver 1.11
[ 13.378094] ppdev: user-space parallel port driver
[ 13.403566] Bridge firewalling registered
[ 13.631769] Bluetooth: SCO (Voice Link) ver 0.6
[ 13.631772] Bluetooth: SCO socket layer initialized
[ 15.828380] powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology ML-40 processors (1 cpu cores) (version 2.20.00)
[ 15.828720] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x4
[ 15.828723] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x6
[ 15.828725] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0x8
[ 15.828727] powernow-k8: 3 : fid 0x8 (1600 MHz), vid 0xa
[ 15.828730] powernow-k8: 4 : fid 0x0 (800 MHz), vid 0x16
[ 17.047555] [drm] Setting GART location based on new memory map
[ 17.048906] [drm] Loading R300 Microcode
[ 17.049690] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[ 17.106720] [drm] Num pipes: 1
[ 17.106731] [drm] writeback test succeeded in 1 usecs
[ 91.604783] wlan0: direct probe to AP 00:1f:90:b3:50:cc (try 1)
[ 91.606580] wlan0: direct probe responded
[ 91.606589] wlan0: authenticate with AP 00:1f:90:b3:50:cc (try 1)
[ 91.608623] wlan0: authenticated
[ 91.608660] wlan0: associate with AP 00:1f:90:b3:50:cc (try 1)
[ 91.610630] wlan0: RX AssocResp from 00:1f:90:b3:50:cc (capab=0x431 status=0 aid=1)
[ 91.610639] wlan0: associated
[ 91.612513] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 91.613368] cfg80211: Calling CRDA for country: US
[ 102.028039] wlan0: no IPv6 routers present
** Model information
sys_vendor: Hewlett-Packard
product_name: Pavilion dv5000 (EP414UA#ABA)
product_version: F.22
chassis_vendor: Hewlett-Packard
chassis_version: N/A
bios_vendor: Hewlett-Packard
bios_version: F.22
board_vendor: Hewlett-Packard
board_name: 30A4
board_version: 49.25
** Loaded modules:
Module Size Used by
powernow_k8 10978 0
cpufreq_conservative 5162 0
cpufreq_powersave 902 0
cpufreq_stats 2659 0
cpufreq_userspace 1992 0
sco 7209 2
bridge 39598 0
stp 1440 1 bridge
ppdev 5030 0
rfcomm 29581 0
bnep 9427 2
lp 7462 0
parport 27954 2 ppdev,lp
l2cap 24736 6 rfcomm,bnep
bluetooth 41827 6 sco,rfcomm,bnep,l2cap
uinput 6376 1
binfmt_misc 6431 1
fuse 50190 1
loop 11783 0
firewire_sbp2 11514 0
snd_atiixp_modem 8139 0
snd_atiixp 11221 2
snd_ac97_codec 99186 2 snd_atiixp_modem,snd_atiixp
ac97_bus 1086 1 snd_ac97_codec
snd_pcm_oss 32591 0
snd_mixer_oss 12606 1 snd_pcm_oss
snd_pcm 60471 5 snd_atiixp_modem,snd_atiixp,snd_ac97_codec,snd_pcm_oss
snd_seq_midi 4400 0
snd_rawmidi 15515 1 snd_seq_midi
snd_seq_midi_event 4628 1 snd_seq_midi
snd_seq 42881 2 snd_seq_midi,snd_seq_midi_event
snd_timer 15582 3 snd_pcm,snd_seq
snd_seq_device 4493 3 snd_seq_midi,snd_rawmidi,snd_seq
radeon 571930 2
snd 46446 12 snd_atiixp_modem,snd_atiixp,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
ttm 39986 1 radeon
soundcore 4598 1 snd
arc4 1274 2
snd_page_alloc 6249 3 snd_atiixp_modem,snd_atiixp,snd_pcm
tpm_tis 7336 0
joydev 8411 0
drm_kms_helper 20065 1 radeon
drm 142551 5 radeon,ttm,drm_kms_helper
i2c_algo_bit 4225 1 radeon
tifm_7xx1 3850 0
wmi 4323 0
yenta_socket 19115 1
shpchp 26264 0
video 17445 0
ecb 1841 2
pci_hotplug 21203 1 shpchp
k8temp 3139 0
tifm_core 4340 1 tifm_7xx1
b43 146172 0
tpm 9917 1 tpm_tis
i2c_piix4 8328 0
rng_core 3006 1 b43
tpm_bios 4521 1 tpm
edac_core 29261 0
edac_mce_amd 6433 0
i2c_core 15712 5 radeon,drm_kms_helper,drm,i2c_algo_bit,i2c_piix4
output 1692 1 video
rsrc_nonstatic 7294 1 yenta_socket
battery 4998 0
button 4650 0
ac 2192 0
processor 30231 2 powernow_k8
mac80211 136844 1 b43
cfg80211 101432 2 b43,mac80211
rfkill 13044 3 bluetooth,cfg80211
serio_raw 3752 0
psmouse 49777 0
evdev 7352 24
pcspkr 1699 0
ext4 285611 2
mbcache 5050 1 ext4
jbd2 66919 1 ext4
crc16 1319 2 l2cap,ext4
usbhid 33260 0
hid 62825 1 usbhid
sg 18744 0
sr_mod 12602 0
cdrom 29415 1 sr_mod
sd_mod 29777 4
crc_t10dif 1276 1 sd_mod
ata_generic 2983 0
pata_atiixp 3489 3
ssb 38618 1 b43
sdhci_pci 5581 0
sdhci 13966 1 sdhci_pci
ohci_hcd 19212 0
8139cp 15941 0
pcmcia 19474 2 b43,ssb
thermal 11674 0
libata 133520 2 ata_generic,pata_atiixp
mmc_core 45472 3 b43,ssb,sdhci
firewire_ohci 19468 0
firewire_core 36736 2 firewire_sbp2,firewire_ohci
crc_itu_t 1307 1 firewire_core
thermal_sys 11942 3 video,processor,thermal
pcmcia_core 24118 5 yenta_socket,b43,rsrc_nonstatic,ssb,pcmcia
led_class 2433 2 b43,sdhci
8139too 17981 0
mii 3210 2 8139cp,8139too
ehci_hcd 31039 0
scsi_mod 122117 5 firewire_sbp2,sg,sr_mod,sd_mod,libata
usbcore 121959 4 usbhid,ohci_hcd,ehci_hcd
nls_base 6361 1 usbcore
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
link/ether 00:0f:b0:c4:c8:bb brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 00:14:a5:6a:75:2f brd ff:ff:ff:ff:ff:ff
inet 192.168.1.2/24 brd 192.168.1.255 scope global wlan0
inet6 fe80::214:a5ff:fe6a:752f/64 scope link
valid_lft forever preferred_lft forever
4: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
link/ether c6:13:6e:79:33:5d brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 4236 58 0 0 0 0 0 0 4236 58 0 0 0 0 0 0
eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
wlan0: 565802 881 0 0 0 0 0 0 86102 636 0 0 0 0 0 0
pan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
875 total packets received
43 with invalid addresses
0 forwarded
0 incoming packets discarded
736 incoming packets delivered
659 requests sent out
16 outgoing packets dropped
Icmp:
24 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 24
24 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 24
IcmpMsg:
InType3: 24
OutType3: 24
Tcp:
29 active connections openings
0 passive connection openings
1 failed connection attempts
0 connection resets received
1 connections established
426 segments received
408 segments send out
0 segments retransmited
0 bad segments received.
3 resets sent
Udp:
197 packets received
24 packets to unknown port received.
0 packet receive errors
227 packets sent
UdpLite:
TcpExt:
2 TCP sockets finished time wait in fast timer
25 delayed acks sent
255 packet headers predicted
58 acknowledgments not containing data payload received
1 connections reset due to unexpected data
IpExt:
InMcastPkts: 19
OutMcastPkts: 21
InBcastPkts: 67
InOctets: 539429
OutOctets: 65805
InMcastOctets: 3161
OutMcastOctets: 3241
InBcastOctets: 41004
*** Device features:
eth0: 0x829
lo: 0x13865
pan0: 0xff3865
wlan0: 0x2000
** PCI devices:
00:00.0 Host bridge [0600]: ATI Technologies Inc RS480 Host Bridge [1002:5950] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:30a4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 64
00:01.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a3f] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00009000-00009fff
Memory behind bridge: c0100000-c01fffff
Prefetchable memory behind bridge: 00000000c8000000-00000000cfffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:05.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a37] (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:13.0 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB Host Controller [1002:4374] (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc IXP SB400 USB Host Controller [1002:4374]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at c0000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
00:13.1 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB Host Controller [1002:4375] (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc IXP SB400 USB Host Controller [1002:4375]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at c0001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB2 Host Controller [1002:4373] (prog-if 20 [EHCI])
Subsystem: ATI Technologies Inc IXP SB400 USB2 Host Controller [1002:4373]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at c0002000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc IXP SB400 SMBus Controller [1002:4372] (rev 11)
Subsystem: Hewlett-Packard Company Device [103c:30a4]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: I/O ports at 8400 [size=16]
Region 1: Memory at c0003000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: piix4_smbus
00:14.1 IDE interface [0101]: ATI Technologies Inc IXP SB400 IDE Controller [1002:4376] (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Device [103c:30a4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 8410 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_atiixp
00:14.3 ISA bridge [0601]: ATI Technologies Inc IXP SB400 PCI-ISA Bridge [1002:4377]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: ATI Technologies Inc IXP SB400 PCI-PCI Bridge [1002:4371] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=06, subordinate=08, sec-latency=64
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: c0200000-c02fffff
Prefetchable memory behind bridge: 80000000-83ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 Multimedia audio controller [0401]: ATI Technologies Inc IXP SB400 AC'97 Audio Controller [1002:4370] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:30a4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at c0003400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ATI IXP AC97 controller
00:14.6 Modem [0703]: ATI Technologies Inc SB400 AC'97 Modem Controller [1002:4378] (rev 02) (prog-if 00 [Generic])
Subsystem: Hewlett-Packard Company Device [103c:30a4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at c0003800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ATI IXP MC97 controller
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: k8temp
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon XPRESS 200M 5955 (PCIE) [1002:5955] (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:30a4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 66 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at c8000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 9000 [size=256]
Region 2: Memory at c0100000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at c0120000 [disabled] [size=128K]
Capabilities: <access denied>
06:02.0 Network controller [0280]: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller [14e4:4318] (rev 02)
Subsystem: Hewlett-Packard Company Broadcom 802.11b/g WLAN [103c:1355]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 21
Region 0: Memory at c0204000 (32-bit, non-prefetchable) [size=8K]
Kernel driver in use: b43-pci-bridge
06:04.0 CardBus bridge [0607]: Texas Instruments PCIxx21/x515 Cardbus Controller [104c:8031]
Subsystem: Hewlett-Packard Company Device [103c:30a4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at c0208000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=06, secondary=07, subordinate=07, sec-latency=176
Memory window 0: 80000000-83fff000 (prefetchable)
Memory window 1: 84000000-87fff000
I/O window 0: 0000a400-0000a4ff
I/O window 1: 0000a800-0000a8ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
06:04.2 FireWire (IEEE 1394) [0c00]: Texas Instruments OHCI Compliant IEEE 1394 Host Controller [104c:8032] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:30a4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 23
Region 0: Memory at c0209000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at c0200000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
06:04.3 Mass storage controller [0180]: Texas Instruments PCIxx21 Integrated FlashMedia Controller [104c:8033]
Subsystem: Hewlett-Packard Company Device [103c:30a4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 23
Region 0: Memory at c0206000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: tifm_7xx1
06:04.4 SD Host controller [0805]: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller [104c:8034]
Subsystem: Hewlett-Packard Company Device [103c:30a4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at c020a000 (32-bit, non-prefetchable) [size=256]
Region 1: Memory at c0209c00 (32-bit, non-prefetchable) [size=256]
Region 2: Memory at c0209800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
06:06.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Hewlett-Packard Company Device [103c:30a4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at a000 [size=256]
Region 1: Memory at c020a400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: 8139too
** USB devices:
Bus 003 Device 002: ID 062a:0252 Creative Labs
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii debconf [debconf-2.0] 1.5.32 Debian configuration management sy
ii initramfs-tools [linux-initr 0.94.4 tools for generating an initramfs
ii linux-base 2.6.32-14 Linux image base package
ii module-init-tools 3.12~pre2-3 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-amd64 recommends:
ii firmware-linux-free 2.6.32-14 Binary firmware for various driver
Versions of packages linux-image-2.6.32-5-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
ii firmware-linux 0.24 Binary firmware for various driver
ii firmware-linux-nonfree 0.24 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-5-amd64/postinst/bootloader-test-error-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/bootloader-error-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/prerm/would-invalidate-boot-loader-2.6.32-5-amd64: true
linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true
linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
Reply to: