Bug#563551: marked as done (Linux resets Huawei E220 3G USB modem as soon as the storage is accessed)

To: Moritz Muehlenhoff <jmm@inutil.org>
Subject: Bug#563551: marked as done (Linux resets Huawei E220 3G USB modem as soon as the storage is accessed)
From: owner@bugs.debian.org (Debian Bug Tracking System)
Date: Fri, 28 May 2010 17:12:06 +0000
Message-id: <[🔎] handler.563551.D563551.127506662127269.ackdone@bugs.debian.org>
References: <20100528171002.GA2663@galadriel.inutil.org> <20100103182541.2931.90796.reportbug@cthulhu.massot.name>

Your message dated Fri, 28 May 2010 19:10:02 +0200
with message-id <20100528171002.GA2663@galadriel.inutil.org>
and subject line Re: Bug#563551: Re: usb-modeswitch: Disconnect the Huawei E220 3G USB modem
has caused the Debian Bug report #563551,
regarding Linux resets Huawei E220 3G USB modem as soon as the storage is accessed
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
563551: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=563551
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems

--- Begin Message ---

To: Debian Bug Tracking System <submit@bugs.debian.org>
Subject: usb-modeswitch: Disconnect the Huawei E220 3G USB modem
From: Frederic MASSOT <frederic@juliana-multimedia.com>
Date: Sun, 03 Jan 2010 19:25:41 +0100
Message-id: <20100103182541.2931.90796.reportbug@cthulhu.massot.name>

Package: usb-modeswitch
Version: 1.0.5-1
Severity: normal


Hi,

Before the update of usb-modeswitch from version 1.0.2-1 to 1.0.5-1 and udev from
146-5 to 149-2, the Huawei E220 3G USB modem was detected as it is connected before
or after the login to Gnome. Today, I must wait for the login to Gnome to
connect the E220.

I commented the line "GOTO="modeswitch_rules_end" in file "80-usb_modeswitch.rules"
but it changes nothing.

Here the logs when I boot with the E220 already connected:

Jan  3 18:50:55 cthulhu kernel: usb 5-2: new full speed USB device using uhci_hcd and address 3
Jan  3 18:50:55 cthulhu kernel: usb 5-2: New USB device found, idVendor=12d1, idProduct=1003
Jan  3 18:50:55 cthulhu kernel: usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jan  3 18:50:55 cthulhu kernel: usb 5-2: Product: HUAWEI Mobile
Jan  3 18:50:55 cthulhu kernel: usb 5-2: Manufacturer: HUAWEI Technologies
Jan  3 18:50:55 cthulhu kernel: usb 5-2: configuration #1 chosen from 1 choice
Jan  3 18:50:55 cthulhu kernel: option 5-2:1.0: GSM modem (1-port) converter detected
Jan  3 18:50:55 cthulhu kernel: usb 5-2: GSM modem (1-port) converter now attached to ttyUSB0
Jan  3 18:50:55 cthulhu kernel: option 5-2:1.1: GSM modem (1-port) converter detected
Jan  3 18:50:55 cthulhu kernel: usb 5-2: GSM modem (1-port) converter now attached to ttyUSB1
Jan  3 18:50:55 cthulhu kernel: scsi10 : SCSI emulation for USB Mass Storage devices
Jan  3 18:50:55 cthulhu kernel: scsi 10:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
Jan  3 18:50:55 cthulhu kernel: sr2: scsi3-mmc drive: 0x/93x caddy
Jan  3 18:50:55 cthulhu kernel: sr 10:0:0:0: Attached scsi generic sg3 type 5
Jan  3 18:50:55 cthulhu kernel: udev: renamed network interface wlan0 to ath18
Jan  3 18:50:55 cthulhu kernel: sr: Sense Key : 0x4 [current] 
Jan  3 18:50:55 cthulhu kernel: sr: ASC=0x0 ASCQ=0x0
Jan  3 18:50:55 cthulhu kernel: Linux video capture interface: v2.00
Jan  3 18:50:55 cthulhu kernel: uvcvideo: Found UVC 1.00 device ASUS USB2.0 Webcam (0458:705a)
Jan  3 18:50:55 cthulhu kernel: input: ASUS USB2.0 Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input4
Jan  3 18:50:55 cthulhu kernel: usbcore: registered new interface driver uvcvideo
Jan  3 18:50:55 cthulhu kernel: USB Video Class driver (v0.1.0)
Jan  3 18:50:55 cthulhu kernel: sr: Sense Key : 0x4 [current] 
Jan  3 18:50:55 cthulhu kernel: sr: ASC=0x0 ASCQ=0x0
Jan  3 18:50:55 cthulhu kernel: sr: Sense Key : 0x4 [current] 
Jan  3 18:50:55 cthulhu kernel: sr: ASC=0x0 ASCQ=0x0
Jan  3 18:50:55 cthulhu kernel: sr: Sense Key : 0x4 [current] 
Jan  3 18:50:55 cthulhu kernel: sr: ASC=0x0 ASCQ=0x0
Jan  3 18:50:55 cthulhu kernel: saa7130/34: v4l2 driver version 0.2.15 loaded
Jan  3 18:50:55 cthulhu kernel: saa7134 0000:05:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Jan  3 18:50:55 cthulhu kernel: saa7133[0]: found at 0000:05:03.0, rev: 209, irq: 16, latency: 64, mmio: 0xff7ff000
Jan  3 18:50:55 cthulhu kernel: saa7133[0]: subsystem: 1043:4876, board: ASUSTeK P7131 Hybrid [card=112,autodetected]
Jan  3 18:50:55 cthulhu kernel: saa7133[0]: board init: gpio is 0
Jan  3 18:50:55 cthulhu kernel: input: saa7134 IR (ASUSTeK P7131 Hybri as /devices/pci0000:00/0000:00:1e.0/0000:05:03.0/input/input5
Jan  3 18:50:55 cthulhu kernel: IRQ 16/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
Jan  3 18:50:55 cthulhu kernel: sr: Sense Key : 0x4 [current] 
Jan  3 18:50:55 cthulhu kernel: sr: ASC=0x0 ASCQ=0x0
Jan  3 18:50:55 cthulhu kernel: saa7133[0]: i2c eeprom 00: 43 10 76 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
Jan  3 18:50:55 cthulhu kernel: saa7133[0]: i2c eeprom 10: ff ff ff 0f ff 20 ff ff ff ff ff ff ff ff ff ff
Jan  3 18:50:55 cthulhu kernel: saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 d5 ff ff ff ff
Jan  3 18:50:55 cthulhu kernel: saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Jan  3 18:50:55 cthulhu kernel: saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 55 50 ff ff ff ff ff ff
Jan  3 18:50:55 cthulhu kernel: saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Jan  3 18:50:55 cthulhu kernel: saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Jan  3 18:50:55 cthulhu kernel: saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Jan  3 18:50:55 cthulhu kernel: saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Jan  3 18:50:55 cthulhu kernel: saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Jan  3 18:50:55 cthulhu kernel: saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Jan  3 18:50:55 cthulhu kernel: saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Jan  3 18:50:55 cthulhu kernel: saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Jan  3 18:50:55 cthulhu kernel: saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Jan  3 18:50:55 cthulhu kernel: saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Jan  3 18:50:55 cthulhu kernel: saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Jan  3 18:50:55 cthulhu kernel: i2c i2c-1: Invalid 7-bit address 0x7a
Jan  3 18:50:55 cthulhu kernel: tuner 1-004b: chip found @ 0x96 (saa7133[0])
Jan  3 18:50:55 cthulhu kernel: tda829x 1-004b: setting tuner address to 61
Jan  3 18:50:55 cthulhu kernel: tda829x 1-004b: type set to tda8290+75a
Jan  3 18:50:55 cthulhu kernel: saa7133[0]: registered device video1 [v4l2]
Jan  3 18:50:55 cthulhu kernel: saa7133[0]: registered device vbi0
Jan  3 18:50:55 cthulhu kernel: saa7133[0]: registered device radio0
Jan  3 18:50:55 cthulhu kernel: dvb_init() allocating 1 frontend
Jan  3 18:50:55 cthulhu kernel: DVB: registering new adapter (saa7133[0])
Jan  3 18:50:55 cthulhu kernel: DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)...
Jan  3 18:50:55 cthulhu kernel: tda1004x: setting up plls for 48MHz sampling clock
Jan  3 18:50:55 cthulhu kernel: tda1004x: found firmware revision 29 -- ok
Jan  3 18:50:55 cthulhu kernel: saa7134 ALSA driver for DMA sound loaded
Jan  3 18:50:55 cthulhu kernel: IRQ 16/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
Jan  3 18:50:55 cthulhu kernel: saa7133[0]/alsa: saa7133[0] at 0xff7ff000 irq 16 registered as card -1
Jan  3 18:50:55 cthulhu kernel: Adding 979924k swap on /dev/sda1.  Priority:-1 extents:1 across:979924k 
Jan  3 18:50:55 cthulhu kernel: EXT3 FS on sda2, internal journal
Jan  3 18:50:55 cthulhu kernel: ttyS1: LSR safety check engaged!
Jan  3 18:50:55 cthulhu kernel: ttyS1: LSR safety check engaged!
Jan  3 18:50:58 cthulhu /usr/sbin/gpm[2156]: *** info [daemon/startup.c(131)]: 
Jan  3 18:50:58 cthulhu /usr/sbin/gpm[2156]: Started gpm successfully. Entered daemon mode.
Jan  3 18:51:03 cthulhu dhcdbd: Started up.
Jan  3 18:51:04 cthulhu kernel: ttyS1: LSR safety check engaged!
Jan  3 18:51:11 cthulhu kernel: r8169: eth0: link down
Jan  3 18:52:24 cthulhu kernel: devkit-disks-da[6011]: segfault at c ip 080660da sp bfb85410 error 4 in devkit-disks-daemon[8048000+28000]
Jan  3 18:52:26 cthulhu kernel: 4:3:1: cannot get freq at ep 0x84
Jan  3 18:52:26 cthulhu kernel: 4:3:1: cannot get freq at ep 0x84
Jan  3 18:52:29 cthulhu nautilus: Nautilus-Actions 2.29.1 initializing...
Jan  3 18:52:31 cthulhu kernel: option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
Jan  3 18:52:31 cthulhu kernel: option 5-2:1.0: device disconnected
Jan  3 18:52:31 cthulhu kernel: option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
Jan  3 18:52:31 cthulhu kernel: option 5-2:1.1: device disconnected
Jan  3 18:52:31 cthulhu kernel: usb 5-2: reset full speed USB device using uhci_hcd and address 3
Jan  3 18:52:32 cthulhu kernel: usb 5-2: reset full speed USB device using uhci_hcd and address 3
Jan  3 18:52:32 cthulhu kernel: usb 5-2: USB disconnect, address 3
Jan  3 18:52:49 cthulhu kernel: usb 5-2: new full speed USB device using uhci_hcd and address 4
Jan  3 18:52:49 cthulhu kernel: usb 5-2: New USB device found, idVendor=12d1, idProduct=1003
Jan  3 18:52:49 cthulhu kernel: usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jan  3 18:52:49 cthulhu kernel: usb 5-2: Product: HUAWEI Mobile
Jan  3 18:52:49 cthulhu kernel: usb 5-2: Manufacturer: HUAWEI Technologies
Jan  3 18:52:49 cthulhu kernel: usb 5-2: configuration #1 chosen from 1 choice
Jan  3 18:52:49 cthulhu kernel: option 5-2:1.0: GSM modem (1-port) converter detected
Jan  3 18:52:49 cthulhu kernel: usb 5-2: GSM modem (1-port) converter now attached to ttyUSB0
Jan  3 18:52:49 cthulhu kernel: option 5-2:1.1: GSM modem (1-port) converter detected
Jan  3 18:52:49 cthulhu kernel: usb 5-2: GSM modem (1-port) converter now attached to ttyUSB1
Jan  3 18:52:49 cthulhu kernel: scsi13 : SCSI emulation for USB Mass Storage devices
Jan  3 18:53:15 cthulhu kernel: option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
Jan  3 18:53:15 cthulhu kernel: option 5-2:1.0: device disconnected
Jan  3 18:53:15 cthulhu kernel: option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
Jan  3 18:53:15 cthulhu kernel: option 5-2:1.1: device disconnected
Jan  3 18:53:15 cthulhu kernel: usb 5-2: reset full speed USB device using uhci_hcd and address 4
Jan  3 18:53:15 cthulhu kernel: scsi 13:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
Jan  3 18:53:15 cthulhu kernel: sr2: scsi-1 drive
Jan  3 18:53:15 cthulhu kernel: sr 13:0:0:0: Attached scsi generic sg3 type 5


The E220 is disconnected after the login to Gnome.

If I connect the E220 after login to Gnome:

Jan  3 19:01:09 cthulhu kernel: usb 5-2: new full speed USB device using uhci_hcd and address 5
Jan  3 19:01:09 cthulhu kernel: usb 5-2: New USB device found, idVendor=12d1, idProduct=1003
Jan  3 19:01:09 cthulhu kernel: usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jan  3 19:01:09 cthulhu kernel: usb 5-2: Product: HUAWEI Mobile
Jan  3 19:01:09 cthulhu kernel: usb 5-2: Manufacturer: HUAWEI Technologies
Jan  3 19:01:09 cthulhu kernel: usb 5-2: configuration #1 chosen from 1 choice
Jan  3 19:01:09 cthulhu kernel: scsi14 : SCSI emulation for USB Mass Storage devices
Jan  3 19:01:09 cthulhu kernel: usb 5-2: USB disconnect, address 5
Jan  3 19:01:10 cthulhu kernel: usb 5-2: new full speed USB device using uhci_hcd and address 6
Jan  3 19:01:10 cthulhu kernel: usb 5-2: New USB device found, idVendor=12d1, idProduct=1003
Jan  3 19:01:10 cthulhu kernel: usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jan  3 19:01:10 cthulhu kernel: usb 5-2: Product: HUAWEI Mobile
Jan  3 19:01:10 cthulhu kernel: usb 5-2: Manufacturer: HUAWEI Technologies
Jan  3 19:01:10 cthulhu kernel: usb 5-2: configuration #1 chosen from 1 choice
Jan  3 19:01:10 cthulhu kernel: option 5-2:1.0: GSM modem (1-port) converter detected
Jan  3 19:01:10 cthulhu kernel: usb 5-2: GSM modem (1-port) converter now attached to ttyUSB0
Jan  3 19:01:10 cthulhu kernel: option 5-2:1.1: GSM modem (1-port) converter detected
Jan  3 19:01:10 cthulhu kernel: usb 5-2: GSM modem (1-port) converter now attached to ttyUSB1
Jan  3 19:01:10 cthulhu kernel: scsi17 : SCSI emulation for USB Mass Storage devices
Jan  3 19:01:15 cthulhu kernel: scsi 17:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
Jan  3 19:01:15 cthulhu kernel: sr2: scsi-1 drive
Jan  3 19:01:15 cthulhu kernel: sr 17:0:0:0: Attached scsi generic sg3 type 5


And I can connect to the network with NetworkManager.


I have the same problem when I'm connected to the network with the E220 and I insert a CD, the E220 modem disappears:

Jan  3 19:04:20 cthulhu kernel: sr 6:0:0:0: [sr0] Result: hostbyte=0x00 driverbyte=0x08
Jan  3 19:04:20 cthulhu kernel: sr 6:0:0:0: [sr0] Sense Key : 0x5 [current] 
Jan  3 19:04:20 cthulhu kernel: sr 6:0:0:0: [sr0] ASC=0x64 ASCQ=0x0
Jan  3 19:04:20 cthulhu kernel: sr 6:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 00 00 00 00 40 00
Jan  3 19:04:20 cthulhu kernel: sr 6:0:0:0: [sr0] Result: hostbyte=0x00 driverbyte=0x08
Jan  3 19:04:20 cthulhu kernel: sr 6:0:0:0: [sr0] Sense Key : 0x5 [current] 
Jan  3 19:04:20 cthulhu kernel: sr 6:0:0:0: [sr0] ASC=0x64 ASCQ=0x0
Jan  3 19:04:20 cthulhu kernel: sr 6:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 00 00 00 00 02 00
Jan  3 19:04:20 cthulhu kernel: sr 6:0:0:0: [sr0] Result: hostbyte=0x00 driverbyte=0x08
Jan  3 19:04:20 cthulhu kernel: sr 6:0:0:0: [sr0] Sense Key : 0x5 [current] 
Jan  3 19:04:20 cthulhu kernel: sr 6:0:0:0: [sr0] ASC=0x64 ASCQ=0x0
Jan  3 19:04:20 cthulhu kernel: sr 6:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 00 00 00 00 08 00
Jan  3 19:04:20 cthulhu kernel: sr 6:0:0:0: [sr0] Result: hostbyte=0x00 driverbyte=0x08
Jan  3 19:04:20 cthulhu kernel: sr 6:0:0:0: [sr0] Sense Key : 0x5 [current] 
Jan  3 19:04:20 cthulhu kernel: sr 6:0:0:0: [sr0] ASC=0x64 ASCQ=0x0
Jan  3 19:04:20 cthulhu kernel: sr 6:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 00 00 00 00 02 00
Jan  3 19:04:20 cthulhu kernel: sr 6:0:0:0: [sr0] Result: hostbyte=0x00 driverbyte=0x08
Jan  3 19:04:20 cthulhu kernel: sr 6:0:0:0: [sr0] Sense Key : 0x5 [current] 
Jan  3 19:04:20 cthulhu kernel: sr 6:0:0:0: [sr0] ASC=0x64 ASCQ=0x0
Jan  3 19:04:20 cthulhu kernel: sr 6:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 00 00 00 00 02 00
Jan  3 19:04:24 cthulhu kernel: sr: Sense Key : 0x4 [current] 
Jan  3 19:04:24 cthulhu kernel: sr: ASC=0x0 ASCQ=0x0
Jan  3 19:04:24 cthulhu pppd[2308]: Modem hangup
Jan  3 19:04:24 cthulhu kernel: option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
Jan  3 19:04:24 cthulhu kernel: option 5-2:1.0: device disconnected
Jan  3 19:04:24 cthulhu kernel: option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
Jan  3 19:04:24 cthulhu kernel: option 5-2:1.1: device disconnected
Jan  3 19:04:24 cthulhu pppd[2308]: Connect time 0.7 minutes.
Jan  3 19:04:24 cthulhu pppd[2308]: Sent 0 bytes, received 0 bytes.
Jan  3 19:04:24 cthulhu pppd[2308]: Connection terminated.
Jan  3 19:04:24 cthulhu kernel: usb 5-2: reset full speed USB device using uhci_hcd and address 6
Jan  3 19:04:24 cthulhu pppd[2308]: Exit.
Jan  3 19:04:25 cthulhu kernel: usb 5-2: reset full speed USB device using uhci_hcd and address 6
Jan  3 19:04:25 cthulhu kernel: usb 5-2: USB disconnect, address 6
Jan  3 19:04:42 cthulhu kernel: usb 5-2: new full speed USB device using uhci_hcd and address 7
Jan  3 19:04:43 cthulhu kernel: usb 5-2: New USB device found, idVendor=12d1, idProduct=1003
Jan  3 19:04:43 cthulhu kernel: usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jan  3 19:04:43 cthulhu kernel: usb 5-2: Product: HUAWEI Mobile
Jan  3 19:04:43 cthulhu kernel: usb 5-2: Manufacturer: HUAWEI Technologies
Jan  3 19:04:43 cthulhu kernel: usb 5-2: configuration #1 chosen from 1 choice
Jan  3 19:04:43 cthulhu kernel: option 5-2:1.0: GSM modem (1-port) converter detected
Jan  3 19:04:43 cthulhu kernel: usb 5-2: GSM modem (1-port) converter now attached to ttyUSB0
Jan  3 19:04:43 cthulhu kernel: option 5-2:1.1: GSM modem (1-port) converter detected
Jan  3 19:04:43 cthulhu kernel: usb 5-2: GSM modem (1-port) converter now attached to ttyUSB1
Jan  3 19:04:43 cthulhu kernel: scsi20 : SCSI emulation for USB Mass Storage devices
Jan  3 19:05:09 cthulhu kernel: option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
Jan  3 19:05:09 cthulhu kernel: option 5-2:1.0: device disconnected
Jan  3 19:05:09 cthulhu kernel: option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
Jan  3 19:05:09 cthulhu kernel: option 5-2:1.1: device disconnected
Jan  3 19:05:09 cthulhu kernel: usb 5-2: reset full speed USB device using uhci_hcd and address 7
Jan  3 19:05:09 cthulhu kernel: scsi 20:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
Jan  3 19:05:09 cthulhu kernel: sr2: scsi-1 drive
Jan  3 19:05:09 cthulhu kernel: sr 20:0:0:0: Attached scsi generic sg3 type 5



Regards.


-- System Information:
Debian Release: squeeze/sid
  APT prefers testing
  APT policy: (500, 'testing'), (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.32 (PREEMPT)
Locale: LANG=fr_FR@euro, LC_CTYPE=fr_FR@euro (charmap=ISO-8859-15)
Shell: /bin/sh linked to /bin/dash

Versions of packages usb-modeswitch depends on:
ii  libc6                        2.10.2-2    GNU C Library: Shared libraries
ii  libusb-0.1-4                 2:0.1.12-13 userspace USB programming library
ii  tcl                          8.4.16-2    The Tool Command Language (default
ii  tcl8.3 [tclsh]               8.3.5-14    Tcl (the Tool Command Language) v8
ii  tcl8.4 [tclsh]               8.4.19-4    Tcl (the Tool Command Language) v8
ii  tcl8.5 [tclsh]               8.5.8-2     Tcl (the Tool Command Language) v8

usb-modeswitch recommends no packages.

Versions of packages usb-modeswitch suggests:
pn  gcom                          <none>     (no description available)
ii  wvdial                        1.60.3     PPP dialer with built-in intellige

-- no debconf information

--- End Message ---

--- Begin Message ---

To: Frédéric Massot <frederic@juliana-multimedia.com>

Cc: 563551-done@bugs.debian.org

Subject: Re: Bug#563551: Re: usb-modeswitch: Disconnect the Huawei E220 3G USB modem

From: Moritz Muehlenhoff <jmm@inutil.org>

Date: Fri, 28 May 2010 19:10:02 +0200

Message-id: <20100528171002.GA2663@galadriel.inutil.org>

In-reply-to: <[🔎] 4BFFE128.4070909@juliana-multimedia.com>

References: <[🔎] u2t9e89675b1005070649qb46dda84vad0fe7ba089dcd68@mail.gmail.com> <[🔎] 4BFD2BB4.9060808@juliana-multimedia.com> <[🔎] 1275015643.11244.43.camel@localhost> <[🔎] 4BFFE128.4070909@juliana-multimedia.com>
On Fri, May 28, 2010 at 05:28:40PM +0200, Frédéric Massot wrote:
> Le 28/05/2010 05:00, Ben Hutchings a écrit :
> >Since the new firmware fixes this, it sounds like there is no need a
> >workaround in the kernel.  Can we close it now?
> 
> Yes, you can close this bug. Thank you for the help.

Closing, then.

Cheers,
        Moritz
--- End Message ---

Reply to:

Prev by Date: Re: [libimobiledevice-devel] ipheth
Next by Date: Processed: Re: Bug#442508: coreutils: dd demolishes my computer
Previous by thread: Bug#583523: closed by Ben Hutchings <ben@decadent.org.uk> (Re: Bug#583523: clarify which Pentiums are meant in Description)
Next by thread: Bug#442508: coreutils: dd demolishes my computer
Index(es):
- Date
- Thread