Your message dated Wed, 26 May 2010 18:43:24 +0200 with message-id <20100526164324.GA20038@inutil.org> and subject line Re: Bug#556231: Bug #556231 has caused the Debian Bug report #556231, regarding linux-image-2.6.30-2-amd64: Resumed xfsdump on 2.6.30-2-amd64 causes kernel panic to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 556231: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=556231 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.30-2-amd64: Resumed xfsdump on 2.6.30-2-amd64 causes kernel panic
- From: Stephan Austermühle <au@hcsd.de>
- Date: Sat, 14 Nov 2009 19:44:38 +0100
- Message-id: <4AFEFA96.9000802@hcsd.de>
Package: linux-image-2.6.30-2-amd64 Version: 2.6.30-8 Severity: important When resuming a XFS filesystem dump to tape with xfsdump (package 3.0.2) the kernel panics. Command invoked was xfsdump -l 0 -o -F -f /dev/nst0 /srv/store Message broadcasted by the kernel Message from syslogd@n0001 at Sat Nov 14 17:50:56 2009 ... n0001 kernel: [74948.768612] Kernel panic - not syncing: xfs_fs_destroy_inode: cannot reclaim 0xffff880040d2a980 Full messages on console: Kernel panic - not syncing: xfs_fs_destroy_inode: cannot reclaim 0xffff880040d2a980 Pid: 281, comm: kswapd0 Not tainted 2.6.30-2-amd64 #1 Call Trace: [<ffffffff884b394a>] ? panic+0x86/0x13a [<ffffffff883586ab>] ? __up_write+0x32/0x45 [<ffffffffa82538cb>] ? xfs_iunlock+0x42/0x7c [xfs] [<ffffffffa8276718>] ? xfs_reclaim_inode+0x94/0x12e [xfs] [<ffffffffa8274f7b>] ? xfs_fs_destroy_inode+0x4b/0x4d [xfs] [<ffffffff882d162a>] ? dispose_list+0xce/0xfd [<ffffffff882d184b>] ? shrink_icache_rremory+0x1f2/0x228 [<ffffffff8829cdda>] ? shrink_slab+0xe0/0x153 [<ffffffff8829d648>] ? kswapd+0x4a4/0x633 [<ffffffff8829af7e>] ? isolate_pages_global+0x0/0x22c [<ffffffff88254742>] ? autoremove_wake_function+0x0/0x2e [<ffffffff882348e4>] ? __wake_up_common+0x44/0x73 [<ffffffff8829d1a4>] ? kswapd+0x0/0x633 [<ffffffff8829d1a4>] ? kswapd+0x0/0x633 [<ffffffff8825437a>] ? kthread+0x54/0x80 [<ffffffff88218aca>] ? child_rip+0xa/0x20 [<ffffffff88254326>] ? kthread+0x0/0x80 [<ffffffff88254326>] ? child_rip+0x0/0x20 (Data taken from an OCR processed screenshot) I faced similar problems with other XFS filesystems and kernels in the past. The filesystem is 1.5 TByte in size and about 90% filled with lots of hard links. -- Package-specific info: ** Version: Linux version 2.6.30-2-amd64 (Debian 2.6.30-8) (waldi@debian.org) (gcc version 4.3.4 (Debian 4.3.4-3) ) #1 SMP Fri Sep 25 22:16:56 UTC 2009 ** Command line: root=/dev/mapper/vg00-lv_root ro ** Not tainted ** Kernel log: [ 12.301853] pctv452e_frontend_attach Enter [ 12.307989] cx88/0: cx2388x v4l2 driver version 0.0.7 loaded [ 12.402968] Error: Driver 'pcspkr' is already registered, aborting... [ 12.437416] cx2388x alsa driver version 0.0.7 loaded [ 12.441642] stb0899_attach: Attaching STB0899 [ 12.495484] tveeprom 6-0050: Hauppauge model 69100, rev B2C3, serial# 3084916 [ 12.497403] tveeprom 6-0050: MAC address is 00-0D-FE-2F-12-74 [ 12.499280] tveeprom 6-0050: tuner model is Conexant CX24118A (idx 123, type 4) [ 12.501154] tveeprom 6-0050: TV standards ATSC/DVB Digital (eeprom 0x80) [ 12.502440] pctv452e: CI initialized. [ 12.502442] pctv452e_frontend_attach Leave Ok [ 12.502449] DVB: registering adapter 0 frontend 0 (STB0899 Multistandard)... [ 12.502475] pctv452e_tuner_attach Enter [ 12.510248] tveeprom 6-0050: audio processor is None (idx 0) [ 12.512094] tveeprom 6-0050: decoder processor is CX882 (idx 25) [ 12.513915] tveeprom 6-0050: has no radio, has IR receiver, has no IR transmitter [ 12.515762] cx88[0]: hauppauge eeprom: model=69100 [ 12.517645] input: cx88 IR (Hauppauge WinTV-HVR400 as /devices/pci0000:00/0000:00:02.0/0000:01:00.3/0000:06:03.2/input/input7 [ 12.519620] cx88[0]/2: cx2388x 8802 Driver Manager [ 12.521628] alloc irq_desc for 24 on cpu 0 node 0 [ 12.521630] alloc kstat_irqs on cpu 0 node 0 [ 12.521637] cx88-mpeg driver manager 0000:06:03.2: PCI INT A -> GSI 24 (level, low) -> IRQ 24 [ 12.523686] cx88[0]/2: found at 0000:06:03.2, rev: 5, irq: 24, latency: 32, mmio: 0xb9000000 [ 12.525682] IRQ 24/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 12.527831] cx8800 0000:06:03.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24 [ 12.528674] stb6100_attach: Attaching STB6100 [ 12.528676] pctv452e_tuner_attach Leave [ 12.528949] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/input/input8 [ 12.529000] dvb-usb: schedule remote query interval to 500 msecs. [ 12.529003] pctv452e_power_ctrl: 0 [ 12.529005] dvb-usb: Technotrend TT Connect S2-3650-CI successfully initialized and connected. [ 12.529026] usbcore: registered new interface driver pctv452e [ 12.529047] usbcore: registered new interface driver dvb-usb-tt-connect-s2-3600-01.fw [ 12.545537] cx88[0]/0: found at 0000:06:03.0, rev: 5, irq: 24, latency: 32, mmio: 0xbb000000 [ 12.547585] IRQ 24/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 12.549577] cx88[0]/0: registered device video0 [v4l2] [ 12.551515] cx88[0]/0: registered device vbi0 [ 12.554551] cx88_audio 0000:06:03.1: PCI INT A -> GSI 24 (level, low) -> IRQ 24 [ 12.556571] IRQ 24/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 12.558604] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards [ 12.571662] cx88/2: cx2388x dvb driver version 0.0.7 loaded [ 12.573655] cx88/2: registering cx8802 driver, type: dvb access: shared [ 12.575615] cx88[0]/2: subsystem: 0070:6906, board: Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [card=69] [ 12.577616] cx88[0]/2: cx2388x based DVB/ATSC card [ 12.579537] cx8802_alloc_frontends() allocating 1 frontend(s) [ 12.619905] DVB: registering new adapter (cx88[0]) [ 12.621794] DVB: registering adapter 1 frontend 0 (Conexant CX24116/CX24118)... [ 12.963184] Adding 4194296k swap on /dev/mapper/vg00-lv_swap. Priority:-1 extents:1 across:4194296k [ 14.001746] loop: module loaded [ 14.527606] XFS mounting filesystem dm-4 [ 14.602347] Ending clean XFS mount for filesystem: dm-4 [ 14.603040] XFS mounting filesystem dm-3 [ 14.675446] Ending clean XFS mount for filesystem: dm-3 [ 14.676018] XFS mounting filesystem dm-1 [ 14.753369] Starting XFS recovery on filesystem: dm-1 (logdev: internal) [ 14.884713] Ending XFS recovery on filesystem: dm-1 (logdev: internal) [ 14.887225] XFS mounting filesystem dm-2 [ 14.977953] Starting XFS recovery on filesystem: dm-2 (logdev: internal) [ 15.039201] Ending XFS recovery on filesystem: dm-2 (logdev: internal) [ 15.065079] XFS mounting filesystem dm-8 [ 15.257109] Ending clean XFS mount for filesystem: dm-8 [ 15.288691] XFS mounting filesystem dm-6 [ 15.412476] Ending clean XFS mount for filesystem: dm-6 [ 15.413147] XFS mounting filesystem dm-7 [ 15.574677] Ending clean XFS mount for filesystem: dm-7 [ 15.586322] XFS mounting filesystem dm-9 [ 15.735624] Ending clean XFS mount for filesystem: dm-9 [ 15.755658] XFS mounting filesystem dm-10 [ 15.912160] Ending clean XFS mount for filesystem: dm-10 [ 15.922897] XFS mounting filesystem sdb1 [ 16.237419] Ending clean XFS mount for filesystem: sdb1 [ 17.163674] RPC: Registered udp transport module. [ 17.165323] RPC: Registered tcp transport module. [ 17.255785] Slow work thread pool: Starting up [ 17.257872] Slow work thread pool: Ready [ 17.259501] FS-Cache: Loaded [ 17.326220] FS-Cache: Netfs 'nfs' registered for caching [ 17.367007] e1000e 0000:05:00.0: irq 57 for MSI/MSI-X [ 17.421779] e1000e 0000:05:00.0: irq 57 for MSI/MSI-X [ 17.423776] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 17.479471] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 20.143944] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 20.148369] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 30.056721] svc: failed to register lockdv1 RPC service (errno 97). [ 30.058586] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 30.063367] NFSD: starting 90-second grace period [ 30.840271] eth0: no IPv6 routers present [ 31.900096] warning: `ntpd' uses 32-bit capabilities (legacy support in use) [ 33.067497] pctv452e_power_ctrl: 1 [ 33.719695] cx24116_firmware_ondemand: Waiting for firmware upload (dvb-fe-cx24116.fw)... [ 33.721418] cx88-mpeg driver manager 0000:06:03.2: firmware: requesting dvb-fe-cx24116.fw [ 33.761430] cx24116_firmware_ondemand: Waiting for firmware upload(2)... [ 38.808090] cx24116_load_firmware: FW version 1.23.86.1 [ 38.809790] cx24116_firmware_ondemand: Firmware upload complete [ 39.402745] stb6100_set_bandwidth: Bandwidth=61262500 [ 39.409873] stb6100_get_bandwidth: Bandwidth=62000000 [ 39.431620] stb6100_get_bandwidth: Bandwidth=62000000 [ 39.513876] stb6100_set_frequency: Frequency=1821000 [ 39.520880] stb6100_get_frequency: Frequency=1821023 [ 39.533382] stb6100_get_bandwidth: Bandwidth=62000000 ** Loaded modules: Module Size Used by cpufreq_conservative 7928 0 cpufreq_userspace 3652 0 cpufreq_powersave 1792 0 cpufreq_stats 4660 0 nfsd 269328 9 nfs 258400 0 lockd 68212 2 nfsd,nfs fscache 41704 1 nfs nfs_acl 3264 2 nfsd,nfs auth_rpcgss 40912 2 nfsd,nfs sunrpc 196968 10 nfsd,nfs,lockd,nfs_acl,auth_rpcgss acpi_cpufreq 8912 3 loop 15980 0 isl6421 2272 1 cx24116 15544 1 cx88_dvb 22052 10 cx88_vp3054_i2c 2960 1 cx88_dvb videobuf_dvb 7796 1 cx88_dvb stb6100 7652 1 lnbp22 3156 1 cx88_alsa 11576 0 tuner 19736 0 stb0899 33108 1 snd_pcm 78472 1 cx88_alsa snd_timer 21824 1 snd_pcm psmouse 42172 0 snd 63912 3 cx88_alsa,snd_pcm,snd_timer cx8800 33116 0 dvb_usb_pctv452e 21588 14 dvb_usb 19980 1 dvb_usb_pctv452e cx8802 16084 1 cx88_dvb soundcore 7984 1 snd snd_page_alloc 9984 1 snd_pcm cx88xx 80236 4 cx88_dvb,cx88_alsa,cx8800,cx8802 ir_common 51924 1 cx88xx serio_raw 5844 0 dvb_core 92592 4 cx88_dvb,videobuf_dvb,dvb_usb_pctv452e,dvb_usb i2c_i801 10464 0 rng_core 4872 0 v4l2_common 18448 3 tuner,cx8800,cx88xx videodev 37120 4 tuner,cx8800,cx88xx,v4l2_common v4l1_compat 12676 1 videodev v4l2_compat_ioctl32 9152 1 videodev tveeprom 13668 1 cx88xx pcspkr 2800 0 videobuf_dma_sg 13140 5 cx88_dvb,cx88_alsa,cx8800,cx8802,cx88xx i5000_edac 10000 0 evdev 10448 0 ttpci_eeprom 2784 1 dvb_usb_pctv452e btcx_risc 5144 4 cx88_alsa,cx8800,cx8802,cx88xx videobuf_core 18900 5 videobuf_dvb,cx8800,cx8802,cx88xx,videobuf_dma_sg joydev 11072 0 edac_core 43604 3 i5000_edac i5k_amb 6712 0 button 6512 0 shpchp 32588 0 pci_hotplug 29040 1 shpchp processor 40208 5 acpi_cpufreq xfs 457328 11 exportfs 4656 2 nfsd,xfs sr_mod 15908 0 sg 24040 0 st 36164 0 ch 14504 0 osst 49736 0 dm_mirror 14648 0 dm_region_hash 12736 1 dm_mirror dm_log 9924 2 dm_mirror,dm_region_hash dm_snapshot 22924 0 dm_mod 59384 40 dm_mirror,dm_log,dm_snapshot ide_cd_mod 29048 0 cdrom 34344 2 sr_mod,ide_cd_mod usbhid 37328 0 hid 41376 1 usbhid usb_storage 61600 1 piix 7256 0 ses 6528 0 ide_pci_generic 4964 0 ide_core 104976 3 ide_cd_mod,piix,ide_pci_generic sd_mod 33736 4 crc_t10dif 2096 1 sd_mod enclosure 9104 1 ses ata_generic 5924 0 ahci 36480 0 libata 175660 2 ata_generic,ahci ehci_hcd 33996 0 uhci_hcd 22208 0 mptspi 15840 1 mptscsih 25296 1 mptspi mptbase 61188 2 mptspi,mptscsih scsi_transport_spi 23328 1 mptspi megaraid_sas 34396 5 scsi_mod 158768 13 sr_mod,sg,st,ch,osst,usb_storage,ses,sd_mod,libata,mptspi,mptscsih,scsi_transport_spi,megaraid_sas e1000e 111680 0 thermal 15936 0 fan 5240 0 thermal_sys 16448 3 processor,thermal,fan radeonfb 63720 1 fb_ddc 2528 1 radeonfb i2c_algo_bit 5988 3 cx88_vp3054_i2c,cx88xx,radeonfb i2c_core 25456 18 isl6421,cx24116,cx88_vp3054_i2c,stb6100,lnbp22,tuner,stb0899,cx8800,dvb_usb,cx88xx,i2c_i801,v4l2_common,videodev,tveeprom,ttpci_eeprom,radeonfb,fb_ddc,i2c_algo_bit ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 5000P Chipset Memory Controller Hub [8086:25d8] (rev b1) Subsystem: Intel Corporation Device [8086:346c] Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 0 Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable- Address: fee00000 Data: 0000 Capabilities: [6c] Express (v1) Root Port (Slot-), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag- RBE- FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 unlimited, L1 unlimited ClockPM- Suprise+ LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- RootCtl: ErrCorrectable+ ErrNon-Fatal+ ErrFatal+ PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100] Advanced Error Reporting <?> 00:02.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x8 Port 2-3 [8086:25f7] (rev b1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=06, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: b8000000-bc9fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable+ Address: fee0f00c Data: 4151 Capabilities: [6c] Express (v1) Root Port (Slot-), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag- RBE- FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #2, Speed 2.5GT/s, Width x8, ASPM L0s, Latency L0 unlimited, L1 unlimited ClockPM- Suprise+ LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- RootCtl: ErrCorrectable+ ErrNon-Fatal+ ErrFatal+ PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100] Advanced Error Reporting <?> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:03.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 3 [8086:25e3] (rev b1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable+ Address: fee0f00c Data: 4159 Capabilities: [6c] Express (v1) Root Port (Slot-), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #3, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 unlimited, L1 unlimited ClockPM- Suprise+ LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100] Advanced Error Reporting <?> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:04.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 4 [8086:25e4] (rev b1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable+ Address: fee0f00c Data: 4161 Capabilities: [6c] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #4, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 unlimited, L1 unlimited ClockPM- Suprise+ LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise- Slot # 6, PowerLimit 0.000000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd On, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL+ CmdCplt- PresDet- Interlock- Changed: MRL- PresDet+ LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100] Advanced Error Reporting <?> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:05.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 5 [8086:25e5] (rev b1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=09, subordinate=09, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable+ Address: fee0f00c Data: 4169 Capabilities: [6c] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #5, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 unlimited, L1 unlimited ClockPM- Suprise+ LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise- Slot # 6, PowerLimit 0.000000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd On, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL+ CmdCplt- PresDet- Interlock- Changed: MRL- PresDet+ LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100] Advanced Error Reporting <?> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:06.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 6 [8086:25e6] (rev b1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0a, subordinate=0b, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: bcc00000-bcdfffff Prefetchable memory behind bridge: 00000000bcf00000-00000000bcffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable+ Address: fee0f00c Data: 4171 Capabilities: [6c] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag- RBE- FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #6, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 unlimited, L1 unlimited ClockPM- Suprise+ LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise- Slot # 6, PowerLimit 0.000000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd On, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL+ CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable+ ErrNon-Fatal+ ErrFatal+ PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100] Advanced Error Reporting <?> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:07.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 7 [8086:25e7] (rev b1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: bcb00000-bcbfffff Prefetchable memory behind bridge: 00000000bd000000-00000000bd0fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable+ Address: fee0f00c Data: 4179 Capabilities: [6c] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag- RBE- FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #7, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 unlimited, L1 unlimited ClockPM- Suprise+ LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise- Slot # 6, PowerLimit 0.000000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd On, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL+ CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable+ ErrNon-Fatal+ ErrFatal+ PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100] Advanced Error Reporting <?> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:08.0 System peripheral [0880]: Intel Corporation 5000 Series Chipset DMA Engine [8086:1a38] (rev b1) Subsystem: Intel Corporation Device [8086:346c] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 1 Region 0: Memory at fe700000 (64-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: fee00000 Data: 0000 Capabilities: [6c] Express (v1) Root Complex Integrated Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE- FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM L1 Enabled; Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- 00:10.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FSB Registers [8086:25f0] (rev b1) Subsystem: Intel Corporation Device [8086:346c] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel driver in use: i5000_edac Kernel modules: i5000_edac, i7300_idle, i5k_amb 00:10.1 Host bridge [0600]: Intel Corporation 5000 Series Chipset FSB Registers [8086:25f0] (rev b1) Subsystem: Intel Corporation Device [8086:346c] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel modules: i5000_edac, i7300_idle, i5k_amb 00:10.2 Host bridge [0600]: Intel Corporation 5000 Series Chipset FSB Registers [8086:25f0] (rev b1) Subsystem: Intel Corporation Device [8086:346c] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel modules: i5000_edac, i7300_idle, i5k_amb 00:11.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset Reserved Registers [8086:25f1] (rev b1) Subsystem: Intel Corporation Device [8086:346c] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:13.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset Reserved Registers [8086:25f3] (rev b1) Subsystem: Intel Corporation Device [8086:346c] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:15.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FBD Registers [8086:25f5] (rev b1) Subsystem: Intel Corporation Device [8086:346c] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:16.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FBD Registers [8086:25f6] (rev b1) Subsystem: Intel Corporation Device [8086:346c] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:1d.0 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #1 [8086:2688] (rev 09) (prog-if 00 [UHCI]) Subsystem: Intel Corporation Device [8086:346c] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at 50a0 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #2 [8086:2689] (rev 09) (prog-if 00 [UHCI]) Subsystem: Intel Corporation Device [8086:346c] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 22 Region 4: I/O ports at 5080 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #3 [8086:268a] (rev 09) (prog-if 00 [UHCI]) Subsystem: Intel Corporation Device [8086:346c] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 23 Region 4: I/O ports at 5060 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.3 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #4 [8086:268b] (rev 09) (prog-if 00 [UHCI]) Subsystem: Intel Corporation Device [8086:346c] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 22 Region 4: I/O ports at 5040 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset EHCI USB2 Controller [8086:268c] (rev 09) (prog-if 20 [EHCI]) Subsystem: Intel Corporation Device [8086:346c] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at bce00400 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0 Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev d9) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=32 I/O behind bridge: 00001000-00001fff Memory behind bridge: bca00000-bcafffff Prefetchable memory behind bridge: 00000000b0000000-00000000b7ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn+ Capabilities: [50] Subsystem: Intel Corporation Device [8086:346c] 00:1f.0 ISA bridge [0601]: Intel Corporation 631xESB/632xESB/3100 Chipset LPC Interface Controller [8086:2670] (rev 09) Subsystem: Intel Corporation Device [8086:346c] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Kernel modules: intel-rng, iTCO_wdt 00:1f.1 IDE interface [0101]: Intel Corporation 631xESB/632xESB IDE Controller [8086:269e] (rev 09) (prog-if 8a [Master SecP PriP]) Subsystem: Intel Corporation Device [8086:346c] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 50c0 [size=16] Kernel driver in use: PIIX_IDE Kernel modules: ata_generic, piix, ide-pci-generic 00:1f.2 SATA controller [0106]: Intel Corporation 631xESB/632xESB SATA AHCI Controller [8086:2681] (rev 09) (prog-if 01 [AHCI 1.0]) Subsystem: Intel Corporation Device [8086:346c] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 20 Region 0: I/O ports at 50d8 [size=8] Region 1: I/O ports at 50f4 [size=4] Region 2: I/O ports at 50d0 [size=8] Region 3: I/O ports at 50f0 [size=4] Region 4: I/O ports at 5020 [size=32] Region 5: Memory at bce00000 (32-bit, non-prefetchable) [size=1K] Capabilities: [70] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a8] SATA HBA <?> Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 631xESB/632xESB/3100 Chipset SMBus Controller [8086:269b] (rev 09) Subsystem: Intel Corporation Device [8086:346c] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 20 Region 4: I/O ports at 5000 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c-i801 01:00.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Upstream Port [8086:3500] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=01, secondary=02, subordinate=05, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: bc000000-bc8fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [44] Express (v1) Upstream Port, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-SlotPowerLimit 0.000000W DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 4096 bytes DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s, Latency L0 unlimited, L1 unlimited ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [70] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [80] Subsystem: Intel Corporation Device [8086:346c] Capabilities: [100] Advanced Error Reporting <?> Kernel driver in use: pcieport-driver Kernel modules: shpchp 01:00.3 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express to PCI-X Bridge [8086:350c] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=01, secondary=06, subordinate=06, sec-latency=48 Memory behind bridge: b8000000-bbffffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [44] Express (v1) PCI/PCI-X Bridge, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s, Latency L0 unlimited, L1 unlimited ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- Capabilities: [6c] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [80] Subsystem: Intel Corporation Device [8086:346c] Capabilities: [d8] PCI-X bridge device Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=conv Status: Dev=00:00.3 64bit- 133MHz- SCD- USC- SCO- SRD- Upstream: Capacity=65535 CommitmentLimit=65535 Downstream: Capacity=65535 CommitmentLimit=65535 Capabilities: [100] Advanced Error Reporting <?> Kernel modules: shpchp 02:00.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E1 [8086:3510] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=02, secondary=03, subordinate=03, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [44] Express (v1) Downstream Port (Slot+), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE- FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 4096 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 unlimited, L1 unlimited ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn+ PwrCtrl+ MRL+ AttnInd+ PwrInd+ HotPlug+ Surpise- Slot # 2, PowerLimit 0.000000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd On, Power- Interlock- SltSta: Status: AttnBtn+ PowerFlt+ MRL+ CmdCplt+ PresDet+ Interlock- Changed: MRL+ PresDet+ LinkState- Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+ Address: 00000000fee0f00c Data: 4181 Capabilities: [70] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [80] Subsystem: Intel Corporation Device [8086:346c] Capabilities: [100] Advanced Error Reporting <?> Kernel driver in use: pcieport-driver Kernel modules: shpchp 02:01.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E2 [8086:3514] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=02, secondary=04, subordinate=04, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [44] Express (v1) Downstream Port (Slot-), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE- FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 4096 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 unlimited, L1 unlimited ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+ Address: 00000000fee0f00c Data: 4189 Capabilities: [70] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [80] Subsystem: Intel Corporation Device [8086:346c] Capabilities: [100] Advanced Error Reporting <?> Kernel driver in use: pcieport-driver Kernel modules: shpchp 02:02.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E3 [8086:3518] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=02, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: bc000000-bc8fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [44] Express (v1) Downstream Port (Slot-), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE- FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 4096 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 unlimited, L1 unlimited ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+ Address: 00000000fee0f00c Data: 4191 Capabilities: [70] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [80] Subsystem: Intel Corporation Device [8086:346c] Capabilities: [100] Advanced Error Reporting <?> Kernel driver in use: pcieport-driver Kernel modules: shpchp 05:00.0 Ethernet controller [0200]: Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Copper) [8086:1096] (rev 01) Subsystem: Intel Corporation Device [8086:346c] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 57 Region 0: Memory at bc820000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at bc400000 (32-bit, non-prefetchable) [size=4M] Region 2: I/O ports at 4020 [size=32] Capabilities: [c8] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+ Address: 00000000fee0f00c Data: 41e9 Capabilities: [e0] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM unknown, Latency L0 <128ns, L1 <64us ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100] Advanced Error Reporting <?> Capabilities: [140] Device Serial Number 88-b7-7e-ff-ff-17-15-00 Kernel driver in use: e1000e Kernel modules: e1000e 05:00.1 Ethernet controller [0200]: Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Copper) [8086:1096] (rev 01) Subsystem: Intel Corporation Device [8086:346c] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 58 Region 0: Memory at bc800000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at bc000000 (32-bit, non-prefetchable) [size=4M] Region 2: I/O ports at 4000 [size=32] Capabilities: [c8] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+ Address: 00000000fee0f00c Data: 41c1 Capabilities: [e0] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM unknown, Latency L0 <128ns, L1 <64us ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100] Advanced Error Reporting <?> Capabilities: [140] Device Serial Number 88-b7-7e-ff-ff-17-15-00 Kernel driver in use: e1000e Kernel modules: e1000e 06:03.0 Multimedia video controller [0400]: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05) Subsystem: Hauppauge computer works Inc. Device [0070:6906] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 24 Region 0: Memory at bb000000 (32-bit, non-prefetchable) [size=16M] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: cx8800 Kernel modules: cx8800 06:03.1 Multimedia controller [0480]: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] [14f1:8811] (rev 05) Subsystem: Hauppauge computer works Inc. Device [0070:6906] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (1000ns min, 63750ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 24 Region 0: Memory at ba000000 (32-bit, non-prefetchable) [size=16M] Capabilities: [4c] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: cx88_audio Kernel modules: cx88-alsa 06:03.2 Multimedia controller [0480]: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] [14f1:8802] (rev 05) Subsystem: Hauppauge computer works Inc. Device [0070:6906] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (1500ns min, 22000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 24 Region 0: Memory at b9000000 (32-bit, non-prefetchable) [size=16M] Capabilities: [4c] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: cx88-mpeg driver manager Kernel modules: cx8802 06:03.4 Multimedia controller [0480]: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] [14f1:8804] (rev 05) Subsystem: Hauppauge computer works Inc. Device [0070:6906] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (1500ns min, 63750ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at b8000000 (32-bit, non-prefetchable) [size=16M] Capabilities: [4c] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0a:00.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8114 PCI Express-to-PCI/PCI-X Bridge [10b5:8114] (rev bb) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Region 0: Memory at bcd00000 (32-bit, non-prefetchable) [size=8K] Bus: primary=0a, secondary=0b, subordinate=0b, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: bcc00000-bccfffff Prefetchable memory behind bridge: 00000000bcf00000-00000000bcffffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Power Management version 3 Flags: PMEClk+ DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [58] PCI-X bridge device Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz Status: Dev=0a:00.0 64bit- 133MHz- SCD- USC- SCO+ SRD- Upstream: Capacity=16 CommitmentLimit=16 Downstream: Capacity=16 CommitmentLimit=16 Capabilities: [68] Express (v1) PCI/PCI-X Bridge, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- AttnBtn+ AttnInd+ PwrInd+ RBE- FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <2us, L1 <32us ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- Capabilities: [100] Device Serial Number df-0e-00-00-01-00-00-00 Capabilities: [fb4] Advanced Error Reporting <?> Capabilities: [138] Power Budgeting <?> Capabilities: [148] Virtual Channel <?> Kernel modules: shpchp 0b:08.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI [1000:0030] (rev c1) Subsystem: Hewlett-Packard Company Device [103c:322a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 72 (4000ns min, 1500ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 3000 [size=256] Region 1: Memory at bcc00000 (64-bit, non-prefetchable) [size=128K] Region 3: Memory at bcc20000 (64-bit, non-prefetchable) [size=128K] Expansion ROM at bcf00000 [disabled] [size=1M] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [68] PCI-X non-bridge device Command: DPERE- ERO- RBC=2048 OST=8 Status: Dev=0b:08.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=8 DMCRS=16 RSCEM- 266MHz- 533MHz- Kernel driver in use: mptspi Kernel modules: mptspi 0c:00.0 RAID bus controller [0104]: LSI Logic / Symbios Logic MegaRAID SAS 1078 [1000:0060] (rev 04) Subsystem: Intel Corporation RAID Controller SRCSAS28EV [8086:100a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at bcb00000 (64-bit, non-prefetchable) [size=256K] Region 2: I/O ports at 2000 [size=256] Region 3: Memory at bcb40000 (64-bit, non-prefetchable) [size=256K] Expansion ROM at bd000000 [disabled] [size=64K] Capabilities: [b0] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 2048 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s, Latency L0 <2us, L1 unlimited ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- Capabilities: [c4] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [d4] MSI-X: Enable- Mask- TabSize=4 Vector table: BAR=0 offset=0003e000 PBA: BAR=0 offset=0003f000 Capabilities: [e0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [ec] Vital Product Data <?> Capabilities: [100] Power Budgeting <?> Kernel driver in use: megaraid_sas Kernel modules: megaraid_sas 0d:0c.0 VGA compatible controller [0300]: ATI Technologies Inc ES1000 [1002:515e] (rev 02) (prog-if 00 [VGA controller]) Subsystem: Intel Corporation Device [8086:346c] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B+ DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (2000ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at b0000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at 1000 [size=256] Region 2: Memory at bca00000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at fffe0000 [disabled] [size=128K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: radeonfb Kernel modules: radeonfb -- System Information: Debian Release: 5.0.3 APT prefers stable APT policy: (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.30-2-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=de_DE.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.30-2-amd64 depends on: ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo linux-image-2.6.30-2-amd64 recommends no packages. Versions of packages linux-image-2.6.30-2-amd64 suggests: ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v pn linux-doc-2.6.30 <none> (no description available) -- debconf information: linux-image-2.6.30-2-amd64/preinst/bootloader-initrd-2.6.30-2-amd64: true shared/kernel-image/really-run-bootloader: true linux-image-2.6.30-2-amd64/preinst/initrd-2.6.30-2-amd64: linux-image-2.6.30-2-amd64/preinst/failed-to-move-modules-2.6.30-2-amd64: linux-image-2.6.30-2-amd64/preinst/lilo-has-ramdisk: linux-image-2.6.30-2-amd64/postinst/kimage-is-a-directory: linux-image-2.6.30-2-amd64/prerm/would-invalidate-boot-loader-2.6.30-2-amd64: true linux-image-2.6.30-2-amd64/postinst/old-initrd-link-2.6.30-2-amd64: true linux-image-2.6.30-2-amd64/preinst/abort-install-2.6.30-2-amd64: linux-image-2.6.30-2-amd64/postinst/bootloader-error-2.6.30-2-amd64: linux-image-2.6.30-2-amd64/prerm/removing-running-kernel-2.6.30-2-amd64: true linux-image-2.6.30-2-amd64/postinst/depmod-error-2.6.30-2-amd64: false linux-image-2.6.30-2-amd64/postinst/depmod-error-initrd-2.6.30-2-amd64: false linux-image-2.6.30-2-amd64/preinst/overwriting-modules-2.6.30-2-amd64: true linux-image-2.6.30-2-amd64/preinst/lilo-initrd-2.6.30-2-amd64: true linux-image-2.6.30-2-amd64/postinst/old-dir-initrd-link-2.6.30-2-amd64: true linux-image-2.6.30-2-amd64/preinst/abort-overwrite-2.6.30-2-amd64: linux-image-2.6.30-2-amd64/postinst/create-kimage-link-2.6.30-2-amd64: true linux-image-2.6.30-2-amd64/postinst/bootloader-test-error-2.6.30-2-amd64: linux-image-2.6.30-2-amd64/postinst/old-system-map-link-2.6.30-2-amd64: true linux-image-2.6.30-2-amd64/preinst/elilo-initrd-2.6.30-2-amd64: trueAttachment: smime.p7s
Description: S/MIME Cryptographic Signature
--- End Message ---
--- Begin Message ---
- To: Stephan Austermühle <au@hcsd.de>
- Cc: Alex Elder <aelder@sgi.com>, Christoph Hellwig <hch@lst.de>, 556231-done@bugs.debian.org
- Subject: Re: Bug#556231: Bug #556231
- From: Moritz Muehlenhoff <jmm@inutil.org>
- Date: Wed, 26 May 2010 18:43:24 +0200
- Message-id: <20100526164324.GA20038@inutil.org>
- In-reply-to: <[🔎] 4BFCC126.9010306@hcsd.de>
- References: <4B838925.6030403@hcsd.de> <20100223103545.GB15228@baikonur.stro.at> <4B83B43D.5000701@hcsd.de> <[🔎] 20100522174219.GA28811@galadriel.inutil.org> <[🔎] 4BFCC126.9010306@hcsd.de>
Version: 2.6.32-13 On Wed, May 26, 2010 at 08:35:18AM +0200, Stephan Austermühle wrote: > Hi all, > > Am 22.05.2010 19:42, schrieb Moritz Muehlenhoff: > > > 2.6.32.12 has introduced lots of xfs bugfixes. Please try the current > > 2.6.32-13 kernel from unstable. If the error can still be reproduced > > it should be reported upstream at bugzilla.kernel.org > > Looks like my issue has been solved with 2.6.32-13. At least I was not > able to reproduce the error within three attempts anymore (every > complete xfsdump run takes many, many hours). Thanks for the feedback, closing the bug, then. Cheers, Moritz
--- End Message ---