Bug#581842: linux-image-2.6.32-3-686: No sound with Video TV card. Unsolved issue since 2 years !
Package: linux-2.6
Version: 2.6.32-9
Severity: important
Dear Sir,
I have a TV card for playing TV channels, i.e. Philips below
There is no sound since 2-3 years I have bought this card. I reported a bug but no one could really understand why it is not present in the kernel.
Is there someone that could have enough experience in that field, which is affected to development of kernels. THis card costs 30 bucks, but still it is important that kernel are working.
So I took the audio cabble frmo the tv broadcasst card and pluged it into the mother board AUDIO port of my asus mother board.
No sound.
Please any ASUS motherboards arent working if anyone put the audio cable. This could be annoying for musicians. Ok, apple is better for music, but still let s make LINUX for everyone.
The card is a :
ASUS P7H55M PRO and the port audio that is not supported by any kernels is : pro digital audio connector 4-1 pin spdif_out with the regular:
spdif_out:
+5v N.avail. spdifout GND
for the cabling.
Hoping that someone of talents in coding kernel will read and have interest to this bug.
Any help would be greatly appreciated !
Best regards
Y.
00:1c.3 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 [8086:3b48] (rev 06)
00:1c.4 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 [8086:3b4a] (rev 06)
00:1c.5 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 [8086:3b4c] (rev 06)
00:1d.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 06)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a6)
00:1f.0 ISA bridge [0601]: Intel Corporation 5 Series Chipset LPC Interface Controller [8086:3b06] (rev 06)
00:1f.2 IDE interface [0101]: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA IDE Controller [8086:3b20] (rev 06)
00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 06)
00:1f.5 IDE interface [0101]: Intel Corporation 5 Series/3400 Series Chipset 2 port SATA IDE Controller [8086:3b26] (rev 06)
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
05:00.0 IDE interface [0101]: JMicron Technology Corp. JMB368 IDE controller [197b:2368]
06:01.0 Multimedia controller [0480]: Philips Semiconductors SAA7134/SAA7135HL Video Broadcast Decoder [1131:7134] (rev 01)
-- Package-specific info:
** Version:
Linux version 2.6.32-3-686 (Debian 2.6.32-9) (maks@debian.org) (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Thu Feb 25 06:14:20 UTC 2010
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-3-686 root=UUID=b048a4e6-7397-4c03-ae9c-56945fd46618 ro quiet i915.modeset=1
** Not tainted
** Kernel log:
[ 2.432879] sd 2:0:1:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 2.433468] sd 2:0:1:0: [sdb] Write Protect is off
[ 2.433472] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.433500] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.445584] sdd1
[ 2.445698] sd 4:0:0:0: [sdd] Attached SCSI disk
[ 2.483251] sda1 sda2 sda3
[ 2.483323] sdb:
[ 2.485553] usb 2-1.4: New USB device found, idVendor=04f3, idProduct=0216
[ 2.485558] usb 2-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 2.485563] usb 2-1.4: Product: USB Mouse
[ 2.485637] usb 2-1.4: configuration #1 chosen from 1 choice
[ 2.488556] input: USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input4
[ 2.488597] generic-usb 0003:04F3:0216.0003: input,hidraw2: USB HID v1.11 Mouse [USB Mouse] on usb-0000:00:1d.0-1.4/input0
[ 2.844429] sde1
[ 2.844630] sd 5:0:0:0: [sde] Attached SCSI disk
[ 2.870404] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.907681] sdb1
[ 2.907939] sd 2:0:1:0: [sdb] Attached SCSI disk
[ 3.281910] PM: Starting manual resume from disk
[ 3.281913] PM: Resume from partition 8:2
[ 3.281914] PM: Checking hibernation image.
[ 3.282068] PM: Error -22 checking image file
[ 3.282071] PM: Resume from disk failed.
[ 3.319712] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 4.236650] udev: starting version 153
[ 4.732736] ACPI: SSDT bdc8a0f0 008AA (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 4.733174] ACPI: SSDT bdc8a9a0 00413 (v01 PmRef P001Cst 00003001 INTL 20060113)
[ 4.735012] Monitor-Mwait will be used to enter C-1 state
[ 4.735028] Monitor-Mwait will be used to enter C-2 state
[ 4.735083] processor LNXCPU:00: registered as cooling_device0
[ 4.735818] processor LNXCPU:01: registered as cooling_device1
[ 4.759078] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 4.793432] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.793436] ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f]
[ 4.793515] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.815178] Linux video capture interface: v2.00
[ 4.920541] saa7130/34: v4l2 driver version 0.2.15 loaded
[ 4.920572] saa7134 0000:06:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.920577] saa7134[0]: found at 0000:06:01.0, rev: 1, irq: 16, latency: 64, mmio: 0xfbeffc00
[ 4.920582] saa7134[0]: subsystem: 11bd:002b, board: Pinnacle PCTV Stereo (saa7134) [card=26,autodetected]
[ 4.920597] saa7134[0]: board init: gpio is 6000
[ 4.920601] IRQ 16/saa7134[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 5.081095] saa7134[0]: i2c eeprom 00: bd 11 2b 00 f8 f8 1c 00 43 43 a9 1c 55 d2 b2 92
[ 5.081110] saa7134[0]: i2c eeprom 10: 00 f0 00 00 ff 20 ff ff ff ff ff ff ff ff ff ff
[ 5.081123] saa7134[0]: i2c eeprom 20: 01 40 01 03 03 ff 03 01 08 ff 00 1c ff ff ff ff
[ 5.081135] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5.081147] saa7134[0]: i2c eeprom 40: ff 07 00 c0 86 ff 01 01 ff ff ff ff ff ff ff ff
[ 5.081159] saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5.081168] saa7134[0]: i2c eeprom 60: 0c 22 17 4d 03 0d 73 cf ff ff ff ff ff ff ff ff
[ 5.081174] saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff 34 80 ff ff ff ff ff ff
[ 5.081179] saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5.081184] saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5.081189] saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5.081194] saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5.081199] saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5.081204] saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5.081209] saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5.081215] saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5.081221] i2c i2c-5: Invalid 7-bit address 0x7a
[ 5.282192] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 5.282222] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 5.296766] tuner 5-0043: chip found @ 0x86 (saa7134[0])
[ 5.298255] tda9887 5-0043: creating new instance
[ 5.298257] tda9887 5-0043: tda988[5/6/7] found
[ 5.320623] Chip ID is not zero. It is not a TEA5767
[ 5.320724] tuner 5-0060: chip found @ 0xc0 (saa7134[0])
[ 5.336596] mt20xx 5-0060: microtune: companycode=3cbf part=42 rev=22
[ 5.368543] mt20xx 5-0060: microtune MT2050 found, OK
[ 5.400156] hda_codec: ALC889: BIOS auto-probing.
[ 5.401971] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 5.432512] saa7134[0]: registered device video0 [v4l2]
[ 5.432551] saa7134[0]: registered device vbi0
[ 5.443416] saa7134 ALSA driver for DMA sound loaded
[ 5.443424] IRQ 16/saa7134[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 5.443439] saa7134[0]/alsa: saa7134[0] at 0xfbeffc00 irq 16 registered as card -1
[ 5.846124] Adding 9765880k swap on /dev/sda2. Priority:-1 extents:1 across:9765880k
[ 6.022520] loop: module loaded
[ 6.438417] JFS: nTxBlock = 8192, nTxLock = 65536
[ 7.090904] r8169: eth0: link up
[ 7.090910] r8169: eth0: link up
[ 7.317914] RPC: Registered udp transport module.
[ 7.317917] RPC: Registered tcp transport module.
[ 7.317918] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 7.368722] Slow work thread pool: Starting up
[ 7.368743] Slow work thread pool: Ready
[ 7.368773] FS-Cache: Loaded
[ 7.385604] FS-Cache: Netfs 'nfs' registered for caching
[ 7.408360] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 7.854684] fuse init (API version 7.13)
[ 12.199324] svc: failed to register lockdv1 RPC service (errno 97).
[ 12.199873] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 12.208941] NFSD: starting 90-second grace period
[ 17.188779] eth0: no IPv6 routers present
[ 3389.907410] [drm] DAC-6: set mode 2a
[ 3413.581312] [drm] DAC-6: set mode 2c
[ 3435.744050] [drm] DAC-6: set mode 2d
[ 3440.093483] [drm] DAC-6: set mode 2f
[ 3533.812533] [drm] DAC-6: set mode 30
[ 3540.044512] [drm] DAC-6: set mode 31
** Model information
not available
** Loaded modules:
Module Size Used by
fuse 43750 1
nfsd 193183 13
exportfs 2618 1 nfsd
nfs 206551 0
lockd 49433 2 nfsd,nfs
fscache 24654 1 nfs
nfs_acl 1695 2 nfsd,nfs
auth_rpcgss 25264 2 nfsd,nfs
sunrpc 134592 12 nfsd,nfs,lockd,nfs_acl,auth_rpcgss
jfs 134642 3
loop 9753 0
saa7134_alsa 7859 0
snd_hda_codec_intelhdmi 9027 1
snd_hda_codec_realtek 163098 1
mt20xx 8310 1
tea5767 4529 0
tda9887 6997 1
snd_hda_intel 16427 3
tda8290 7865 0
snd_hda_codec 46002 3 snd_hda_codec_intelhdmi,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 4054 1 snd_hda_codec
tuner 14428 2
snd_pcm 47362 4 saa7134_alsa,snd_hda_intel,snd_hda_codec
snd_seq 35459 0
snd_timer 12258 3 snd_pcm,snd_seq
snd_seq_device 3673 1 snd_seq
snd 34363 14 saa7134_alsa,snd_hda_codec_intelhdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
soundcore 3450 1 snd
saa7134 119996 2 saa7134_alsa
ir_common 22187 1 saa7134
v4l2_common 9816 2 tuner,saa7134
videodev 25541 4 tuner,saa7134,v4l2_common
v4l1_compat 10250 1 videodev
videobuf_dma_sg 7199 2 saa7134_alsa,saa7134
videobuf_core 10476 2 saa7134,videobuf_dma_sg
i2c_i801 6442 0
tveeprom 9393 1 saa7134
pcspkr 1207 0
joydev 6771 0
psmouse 44413 0
snd_page_alloc 5041 2 snd_hda_intel,snd_pcm
asus_atk0110 6770 0
processor 26571 2
evdev 5609 8
serio_raw 2916 0
ext4 254909 1
mbcache 3762 1 ext4
jbd2 56059 1 ext4
crc16 1027 1 ext4
fan 2586 0
sd_mod 25781 8
crc_t10dif 1012 1 sd_mod
sg 15964 0
sr_mod 10770 0
cdrom 26487 1 sr_mod
ata_generic 2015 0
usbhid 27888 0
hid 50657 1 usbhid
ide_pci_generic 1924 0
i915 218794 3
drm_kms_helper 17247 1 i915
ide_core 64146 1 ide_pci_generic
ata_piix 16545 5
drm 107671 4 i915,drm_kms_helper
i2c_algo_bit 3497 1 i915
pata_jmicron 1448 0
intel_agp 20233 1
agpgart 19516 2 drm,intel_agp
thermal 9206 0
r8169 24784 0
mii 2714 1 r8169
libata 114408 3 ata_generic,ata_piix,pata_jmicron
ehci_hcd 27574 0
button 3598 1 i915
i2c_core 12648 13 mt20xx,tea5767,tda9887,tda8290,tuner,saa7134,v4l2_common,videodev,i2c_i801,tveeprom,i915,drm,i2c_algo_bit
video 14605 1 i915
thermal_sys 9378 4 processor,fan,thermal,video
output 1204 1 video
scsi_mod 101297 4 sd_mod,sg,sr_mod,libata
usbcore 98126 3 usbhid,ehci_hcd
nls_base 4541 2 jfs,usbcore
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
iface eth0 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000
link/ether e0:cb:4e:c1:ae:15 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.2/24 brd 192.168.1.255 scope global eth0
inet6 fe80::e2cb:4eff:fec1:ae15/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 11796 160 0 0 0 0 0 0 11796 160 0 0 0 0 0 0
eth0:87008141 60106 0 0 0 0 0 0 3137589 35871 0 0 0 0 0 0
*** Protocol statistics:
Ip:
60260 total packets received
4 with invalid addresses
0 forwarded
0 incoming packets discarded
60256 incoming packets delivered
35974 requests sent out
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
36 active connections openings
2 passive connection openings
28 failed connection attempts
1 connection resets received
1 connections established
60050 segments received
35766 segments send out
4 segments retransmited
0 bad segments received.
588 resets sent
Udp:
215 packets received
0 packets to unknown port received.
0 packet receive errors
216 packets sent
UdpLite:
TcpExt:
1 TCP sockets finished time wait in fast timer
36 delayed acks sent
1 delayed acks further delayed because of locked socket
2 packets directly queued to recvmsg prequeue.
2 bytes directly received in process context from prequeue
49826 packet headers predicted
1277 acknowledgments not containing data payload received
49 predicted acknowledgments
3 congestion windows recovered without slow start after partial ack
4 other TCP timeouts
1 DSACKs sent for old packets
2 DSACKs received
3 connections reset due to unexpected data
TCPDSACKIgnoredNoUndo: 2
IpExt:
InBcastPkts: 63
OutBcastPkts: 61
InOctets: 86185112
OutOctets: 2644275
InBcastOctets: 10761
OutBcastOctets: 10029
*** Device features:
eth0: 0x180
lo: 0x13865
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller [8086:0040] (rev 12)
Subsystem: ASUSTeK Computer Inc. Device [1043:8383]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor Integrated Graphics Controller [8086:0042] (rev 12) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:8383]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 35
Region 0: Memory at fb800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at cc00 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation 5 Series/3400 Series Chipset HECI Controller [8086:3b64] (rev 06)
Subsystem: ASUSTeK Computer Inc. Device [1043:8383]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fbcfb000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:1a.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 06) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8383]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fbcfa000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 06)
Subsystem: ASUSTeK Computer Inc. Device [1043:8435]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fbcf4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: c0000000-c01fffff
Prefetchable memory behind bridge: 00000000c0200000-00000000c03fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 [8086:3b46] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: c0400000-c05fffff
Prefetchable memory behind bridge: 00000000c0600000-00000000c07fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 [8086:3b48] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: c0800000-c09fffff
Prefetchable memory behind bridge: 00000000c0a00000-00000000c0bfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 [8086:3b4a] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fbd00000-fbdfffff
Prefetchable memory behind bridge: 00000000faf00000-00000000faffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 [8086:3b4c] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: c0c00000-c0dfffff
Prefetchable memory behind bridge: 00000000c0e00000-00000000c0ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 06) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8383]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fbcf9000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a6) (prog-if 01 [Subtractive decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
Memory behind bridge: fbe00000-fbefffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 5 Series Chipset LPC Interface Controller [8086:3b06] (rev 06)
Subsystem: ASUSTeK Computer Inc. Device [1043:8383]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA IDE Controller [8086:3b20] (rev 06) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:8383]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 21
Region 0: I/O ports at b880 [size=8]
Region 1: I/O ports at b800 [size=4]
Region 2: I/O ports at b480 [size=8]
Region 3: I/O ports at b400 [size=4]
Region 4: I/O ports at b080 [size=16]
Region 5: I/O ports at b000 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 06)
Subsystem: ASUSTeK Computer Inc. Device [1043:8383]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fbcf8000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0400 [size=32]
00:1f.5 IDE interface [0101]: Intel Corporation 5 Series/3400 Series Chipset 2 port SATA IDE Controller [8086:3b26] (rev 06) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:8383]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 21
Region 0: I/O ports at c880 [size=8]
Region 1: I/O ports at c800 [size=4]
Region 2: I/O ports at c480 [size=8]
Region 3: I/O ports at c400 [size=4]
Region 4: I/O ports at c080 [size=16]
Region 5: I/O ports at c000 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
Subsystem: ASUSTeK Computer Inc. M4A785TD Motherboard [1043:83a3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 34
Region 0: I/O ports at d800 [size=256]
Region 2: Memory at fafff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at faff8000 (64-bit, prefetchable) [size=16K]
Expansion ROM at fbde0000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: r8169
05:00.0 IDE interface [0101]: JMicron Technology Corp. JMB368 IDE controller [197b:2368] (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:824f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at ec00 [size=8]
Region 1: I/O ports at e880 [size=4]
Region 2: I/O ports at e800 [size=8]
Region 3: I/O ports at e480 [size=4]
Region 4: I/O ports at e400 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_jmicron
06:01.0 Multimedia controller [0480]: Philips Semiconductors SAA7134/SAA7135HL Video Broadcast Decoder [1131:7134] (rev 01)
Subsystem: Pinnacle Systems Inc. PCTV Stereo [11bd:002b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (62000ns min, 62000ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fbeffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: saa7134
** USB devices:
Bus 002 Device 005: ID 04f3:0216 Elan Microelectronics Corp.
Bus 002 Device 004: ID 045e:00b0 Microsoft Corp. Digital Media Pro Keyboard
Bus 002 Device 003: ID 147a:e017 Formosa Industrial Computing, Inc. eHome Infrared Receiver
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-3-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-3-686 depends on:
ii debconf [debconf-2.0] 1.5.32 Debian configuration management sy
ii initramfs-tools [linux-initr 0.93.4 tools for generating an initramfs
ii module-init-tools 3.12~pre2-3 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-3-686 recommends:
pn firmware-linux-free <none> (no description available)
ii libc6-i686 2.10.2-6 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.32-3-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-3-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-3-686/postinst/bootloader-error-2.6.32-3-686:
linux-image-2.6.32-3-686/postinst/depmod-error-initrd-2.6.32-3-686: false
linux-image-2.6.32-3-686/postinst/bootloader-test-error-2.6.32-3-686:
* linux-image-2.6.32-3-686/postinst/missing-firmware-2.6.32-3-686:
linux-image-2.6.32-3-686/prerm/would-invalidate-boot-loader-2.6.32-3-686: true
linux-image-2.6.32-3-686/prerm/removing-running-kernel-2.6.32-3-686: true
Reply to: