[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#580068: marked as done (Data corruption using NFS + dm-crypt)



Your message dated Sun, 9 May 2010 16:22:48 +0200
with message-id <20100509142248.GD13880@baikonur.stro.at>
and subject line Re: Bug#580068: Bug#580050: linux-image-2.6.32-3-amd64: kcryptd  crashes under heavy I/O
has caused the Debian Bug report #580068,
regarding Data corruption using NFS + dm-crypt
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
580068: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=580068
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: linux-2.6
Version: 2.6.32-9
Severity: critical
Justification: breaks the whole system

Hello,

I have the following setup in my system: 6 x 500GB drives with software RAID6 + encryption (luks) + LVM. This is a new installation and I'm having troubles with encryption. Every once and a while kcryptd crashes and system becomes unresponsive. Well it responds to ping and currently running applications will continue running (if they don't need disk access I suppose) but I'm unable to ssh to the box anymore or run any new applications.

These crashes (always?) happen when there are lots of I/O going on. Ie. I can reproduce these crashes easily.

I have tested this with latest stable kernel version 2.6.33.3 but the problem persists.

I don't know if this is related to this or a different bug but I also noticed that when I transfer lots of files over nfs from my previous system about 5% of these files are corrupted. Ie. checksums do not match. Sometimes I need to transfer these files several times before everything is transferred ok. I'm able to transfer these files to my other box with no problems. Data gets corrupted only when transferring files to the box having this kcryptd problem.

Nothing appears in system logs after the crash but I was able to get the following using netconsole:

[ 3295.969539] ------------[ cut here ]------------
[ 3295.969580] kernel BUG at /build/mattems-linux-2.6_2.6.32-9-amd64-NYTFdD/linux-2.6-2.6.32-9/debian/build/source_amd64_none/include/linux/scatterlist.h:63!
[ 3295.969627] invalid opcode: 0000 [#1] SMP 
[ 3295.969654] last sysfs file: /sys/module/nfsd/initstate
[ 3295.969678] CPU 1 
[ 3295.969699] Modules linked in: autofs4 nfsd exportfs nfs lockd fscache nfs_acl auth_rpcgss sunrpc ext2 netconsole configfs loop snd_hda_codec_realtek snd_hda_intel psmouse snd_hda_codec snd_hwdep parport_pc snd_pcm edac_core parport asus_atk0110 snd_timer serio_raw edac_mce_amd snd pcspkr evdev i2c_nforce2 soundcore wmi snd_page_alloc i2c_core button processor ext4 mbcache jbd2 crc16 sha256_generic cryptd aes_x86_64 aes_generic cbc dm_crypt dm_mod raid456 async_raid6_recov async_pq raid6_pq async_xor xor async_memcpy async_tx raid1 md_mod sd_mod crc_t10dif ata_generic ide_pci_generic ahci ohci_hcd amd74xx floppy ehci_hcd libata forcedeth scsi_mod ide_core usbcore nls_base thermal thermal_sys [last unloaded: scsi_wait_scan]
[ 3295.970250] Pid: 450, comm: kcryptd Not tainted 2.6.32-3-amd64 #1 System Product Name
[ 3295.970287] RIP: 0010:[<ffffffffa0187a5d>]  [<ffffffffa0187a5d>] crypt_convert+0xe9/0x269 [dm_crypt]
[ 3295.970336] RSP: 0018:ffff88012c39fd80  EFLAGS: 00010206
[ 3295.970360] RAX: 0000000000000002 RBX: ffff8800358533c0 RCX: 0000000000000002
[ 3295.970386] RDX: b2901491843e73a7 RSI: 0000000000000000 RDI: 0000000026726b70
[ 3295.970412] RBP: ffff88012b86f330 R08: 0000000000000000 R09: 0000000000000001
[ 3295.970438] R10: ffff88012ba548d0 R11: 0000000000000000 R12: ffff88003585fff0
[ 3295.970464] R13: ffff88012b86f200 R14: ffff88012c351000 R15: 0000000000000000
[ 3295.970492] FS:  00007fb5063f86f0(0000) GS:ffff880005480000(0000) knlGS:0000000000000000
[ 3295.970530] CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
[ 3295.970554] CR2: 00007f5f81faf000 CR3: 000000012054c000 CR4: 00000000000006e0
[ 3295.970580] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 3295.970606] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 3295.970633] Process kcryptd (pid: 450, threadinfo ffff88012c39e000, task ffff88012cb0cdb0)
[ 3295.970669] Stack:
[ 3295.970687]  ffff880035853408 0000000300000000 ffff88010000d000 ffff88012b86f338
[ 3295.970776] <0> ffff88012ba54800 ffff8800ceaf83c0 0000000000000000 0000000000000202
[ 3295.970827] <0> ffff880035853390 000000000000df00 0000000000000000 ffffffffa0187fec
[ 3295.970892] Call Trace:
[ 3295.970919]  [<ffffffffa0187fec>] ? kcryptd_crypt+0x40f/0x432 [dm_crypt]
[ 3295.970951]  [<ffffffff8106146b>] ? worker_thread+0x188/0x21d
[ 3295.970979]  [<ffffffffa0187bdd>] ? kcryptd_crypt+0x0/0x432 [dm_crypt]
[ 3295.971008]  [<ffffffff81064a56>] ? autoremove_wake_function+0x0/0x2e
[ 3295.971035]  [<ffffffff810612e3>] ? worker_thread+0x0/0x21d
[ 3295.971060]  [<ffffffff81064789>] ? kthread+0x79/0x81
[ 3295.971085]  [<ffffffff81011baa>] ? child_rip+0xa/0x20
[ 3295.971110]  [<ffffffff81064710>] ? kthread+0x0/0x81
[ 3295.971134]  [<ffffffff81011ba0>] ? child_rip+0x0/0x20
[ 3295.971156] Code: 0c 48 8d 45 08 48 89 5d 00 48 89 c7 48 89 44 24 18 e8 80 8b 00 e1 49 8b 14 24 41 8b 7c 24 0c 8b 73 30 48 8b 4d 08 f6 c2 03 74 04 <0f> 0b eb fe 44 89 f8 4c 8b 7c 24 20 83 e1 03 48 09 ca 48 c1 e0 
[ 3295.971523] RIP  [<ffffffffa0187a5d>] crypt_convert+0xe9/0x269 [dm_crypt]
[ 3295.971556]  RSP <ffff88012c39fd80>
[ 3295.971808] ---[ end trace 568ed39004d975a7 ]---


-- Package-specific info:
** Version:
Linux version 2.6.32-3-amd64 (Debian 2.6.32-9) (maks@debian.org) (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Wed Feb 24 18:07:42 UTC 2010

** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-3-amd64 root=/dev/mapper/vg0-root ro quiet

** Not tainted

** Kernel log:
[   26.285144] processor LNXCPU:03: registered as cooling_device3
[   26.292428] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[   26.292437] ACPI: Power Button [PWRB]
[   26.292514] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[   26.292517] ACPI: Power Button [PWRF]
[   26.318609] ACPI: WMI: Mapper loaded
[   26.321709] i2c i2c-0: nForce2 SMBus adapter at 0x600
[   26.321726] i2c i2c-1: nForce2 SMBus adapter at 0x700
[   26.336866] EDAC MC: Ver: 2.1.0 Feb 24 2010
[   26.341152] parport_pc 00:05: reported by Plug and Play ACPI
[   26.341214] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   26.343275] input: PC Speaker as /devices/platform/pcspkr/input/input3
[   26.350892] EDAC amd64_edac:  Ver: 3.2.0 Feb 24 2010
[   26.350972] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
[   26.350983] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[   26.350985]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[   26.350986]  (Note that use of the override may cause unknown side effects.)
[   26.350998] amd64_edac: probe of 0000:00:18.2 failed with error -22
[   26.444000] Error: Driver 'pcspkr' is already registered, aborting...
[   26.500284] HDA Intel 0000:00:07.0: power state changed by ACPI to D0
[   26.500685] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[   26.500690] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
[   26.500852] HDA Intel 0000:00:07.0: setting latency timer to 64
[   27.076006] hda_codec: ALC883: BIOS auto-probing.
[   27.316090] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:07.0/input/input4
[   28.468438] loop: module loaded
[   28.497388] netconsole: local port 32769
[   28.497391] netconsole: local IP 10.78.25.105
[   28.497393] netconsole: interface eth0
[   28.497394] netconsole: remote port 32769
[   28.497396] netconsole: remote IP 10.78.25.103
[   28.497398] netconsole: remote ethernet address 00:1f:c6:81:49:80
[   28.509728] console [netcon0] enabled
[   28.509730] netconsole: network logging started
[   28.715618] Adding 3903480k swap on /dev/mapper/vg0-swap.  Priority:-1 extents:1 across:3903480k 
[   31.743945] EXT4-fs (dm-7): mounted filesystem with ordered data mode
[   31.761910] EXT4-fs (dm-2): mounted filesystem with ordered data mode
[   31.775884] EXT4-fs (dm-4): mounted filesystem with ordered data mode
[   31.805138] EXT4-fs (dm-3): mounted filesystem with ordered data mode
[   31.828173] EXT4-fs (dm-5): mounted filesystem with ordered data mode
[   32.552706] RPC: Registered udp transport module.
[   32.552709] RPC: Registered tcp transport module.
[   32.552710] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   32.599992] Slow work thread pool: Starting up
[   32.600040] Slow work thread pool: Ready
[   32.600094] FS-Cache: Loaded
[   32.630503] FS-Cache: Netfs 'nfs' registered for caching
[   32.664058] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   35.885661] svc: failed to register lockdv1 RPC service (errno 97).
[   35.886371] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   35.886828] NFSD: starting 90-second grace period
[  643.792032] ata4.00: exception Emask 0x0 SAct 0x4ff SErr 0x0 action 0x6 frozen
[  643.792112] ata4.00: failed command: READ FPDMA QUEUED
[  643.792470] ata4.00: cmd 60/50:00:00:57:dd/00:00:03:00:00/40 tag 0 ncq 40960 in
[  643.792471]          res 40/00:00:10:0f:06/00:00:00:00:00/40 Emask 0x4 (timeout)
[  643.792622] ata4.00: status: { DRDY }
[  643.792672] ata4.00: failed command: READ FPDMA QUEUED
[  643.792724] ata4.00: cmd 60/00:08:00:52:dd/01:00:03:00:00/40 tag 1 ncq 131072 in
[  643.792725]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  643.792865] ata4.00: status: { DRDY }
[  643.792917] ata4.00: failed command: READ FPDMA QUEUED
[  643.792974] ata4.00: cmd 60/00:10:00:53:dd/01:00:03:00:00/40 tag 2 ncq 131072 in
[  643.792975]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  643.793107] ata4.00: status: { DRDY }
[  643.793159] ata4.00: failed command: READ FPDMA QUEUED
[  643.793215] ata4.00: cmd 60/e0:18:20:54:dd/00:00:03:00:00/40 tag 3 ncq 114688 in
[  643.793216]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  643.793351] ata4.00: status: { DRDY }
[  643.793403] ata4.00: failed command: READ FPDMA QUEUED
[  643.793460] ata4.00: cmd 60/00:20:00:55:dd/01:00:03:00:00/40 tag 4 ncq 131072 in
[  643.793461]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  643.793596] ata4.00: status: { DRDY }
[  643.793648] ata4.00: failed command: READ FPDMA QUEUED
[  643.793704] ata4.00: cmd 60/00:28:00:56:dd/01:00:03:00:00/40 tag 5 ncq 131072 in
[  643.793705]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  643.793841] ata4.00: status: { DRDY }
[  643.793893] ata4.00: failed command: READ FPDMA QUEUED
[  643.793949] ata4.00: cmd 60/b0:30:50:57:dd/00:00:03:00:00/40 tag 6 ncq 90112 in
[  643.793950]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  643.794085] ata4.00: status: { DRDY }
[  643.794137] ata4.00: failed command: READ FPDMA QUEUED
[  643.794194] ata4.00: cmd 60/58:38:00:58:dd/00:00:03:00:00/40 tag 7 ncq 45056 in
[  643.794195]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  643.794331] ata4.00: status: { DRDY }
[  643.794386] ata4.00: failed command: READ FPDMA QUEUED
[  643.794443] ata4.00: cmd 60/20:50:00:54:dd/00:00:03:00:00/40 tag 10 ncq 16384 in
[  643.794444]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  643.794580] ata4.00: status: { DRDY }
[  643.794635] ata4: hard resetting link
[  644.276010] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  644.278802] ata4.00: configured for UDMA/133
[  644.278808] ata4.00: device reported invalid CHS sector 0
[  644.278811] ata4.00: device reported invalid CHS sector 0
[  644.278814] ata4.00: device reported invalid CHS sector 0
[  644.278816] ata4.00: device reported invalid CHS sector 0
[  644.278819] ata4.00: device reported invalid CHS sector 0
[  644.278821] ata4.00: device reported invalid CHS sector 0
[  644.278823] ata4.00: device reported invalid CHS sector 0
[  644.278826] ata4.00: device reported invalid CHS sector 0
[  644.278837] ata4: EH complete

** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 0403   
board_vendor: ASUSTeK Computer INC.
board_name: M3N78-EH
board_version: Rev 1.xx

** Loaded modules:
Module                  Size  Used by
autofs4                20773  2 
nfsd                  253734  13 
exportfs                3170  1 nfsd
nfs                   240351  0 
lockd                  57539  2 nfsd,nfs
fscache                29818  1 nfs
nfs_acl                 2031  2 nfsd,nfs
auth_rpcgss            33492  2 nfsd,nfs
sunrpc                161121  12 nfsd,nfs,lockd,nfs_acl,auth_rpcgss
ext2                   52969  1 
netconsole              5891  0 
configfs               19924  2 netconsole
loop                   11783  0 
snd_hda_codec_realtek   235378  1 
snd_hda_intel          19619  0 
snd_hda_codec          54212  2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep               5364  1 snd_hda_codec
snd_pcm                60615  2 snd_hda_intel,snd_hda_codec
snd_timer              15502  1 snd_pcm
snd                    46350  6 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore               4598  1 snd
snd_page_alloc          6217  2 snd_hda_intel,snd_pcm
psmouse                49505  0 
serio_raw               3752  0 
pcspkr                  1699  0 
parport_pc             18855  0 
evdev                   7336  2 
edac_core              29245  0 
edac_mce_amd            6353  0 
i2c_nforce2             5280  0 
wmi                     4307  0 
parport                27938  1 parport_pc
i2c_core               15584  1 i2c_nforce2
asus_atk0110            7686  0 
button                  4634  0 
processor              30215  0 
ext4                  285099  6 
mbcache                 4970  2 ext2,ext4
jbd2                   66887  1 ext4
crc16                   1319  1 ext4
sha256_generic          8692  2 
cryptd                  5366  0 
aes_x86_64              7340  2 
aes_generic            25714  1 aes_x86_64
cbc                     2539  1 
dm_crypt               10507  1 
dm_mod                 53674  24 dm_crypt
raid456                44388  1 
async_raid6_recov       5058  1 raid456
async_pq                3479  2 raid456,async_raid6_recov
raid6_pq               77179  2 async_raid6_recov,async_pq
async_xor               2478  3 raid456,async_raid6_recov,async_pq
xor                     4380  1 async_xor
async_memcpy            1198  2 raid456,async_raid6_recov
async_tx                1750  5 raid456,async_raid6_recov,async_pq,async_xor,async_memcpy
raid1                  18175  1 
md_mod                 73632  4 raid456,raid1
sd_mod                 29689  18 
crc_t10dif              1276  1 sd_mod
ata_generic             2983  0 
ide_pci_generic         2788  0 
ahci                   32038  12 
ohci_hcd               19196  0 
libata                132183  2 ata_generic,ahci
amd74xx                 4476  0 
floppy                 49087  0 
ehci_hcd               30706  0 
forcedeth              45448  0 
ide_core               76850  2 ide_pci_generic,amd74xx
scsi_mod              121925  2 sd_mod,libata
usbcore               121703  3 ohci_hcd,ehci_hcd
nls_base                6377  1 usbcore
thermal                11674  0 
thermal_sys            11878  2 processor,thermal

** PCI devices:
00:00.0 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory Controller [10de:0754] (rev a2)
	Subsystem: ASUSTeK Computer Inc. Device [1043:82f2]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:01.0 ISA bridge [0601]: nVidia Corporation MCP78S [GeForce 8200] LPC Bridge [10de:075c] (rev a2)
	Subsystem: ASUSTeK Computer Inc. Device [1043:82f2]
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Region 0: I/O ports at 0900 [size=256]

00:01.1 SMBus [0c05]: nVidia Corporation MCP78S [GeForce 8200] SMBus [10de:0752] (rev a1)
	Subsystem: ASUSTeK Computer Inc. Device [1043:82f2]
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at 0e00 [size=64]
	Region 4: I/O ports at 0600 [size=64]
	Region 5: I/O ports at 0700 [size=64]
	Capabilities: <access denied>
	Kernel driver in use: nForce2_smbus

00:01.2 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory Controller [10de:0751] (rev a1)
	Subsystem: ASUSTeK Computer Inc. Device [1043:82f2]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:01.3 Co-processor [0b40]: nVidia Corporation MCP78S [GeForce 8200] Co-Processor [10de:0753] (rev a2)
	Subsystem: ASUSTeK Computer Inc. Device [1043:82f2]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin B routed to IRQ 10
	Region 0: Memory at fbf80000 (32-bit, non-prefetchable) [size=512K]

00:01.4 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory Controller [10de:0568] (rev a1)
	Subsystem: ASUSTeK Computer Inc. Device [1043:82f2]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:02.0 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller [10de:077b] (rev a1) (prog-if 10 [OHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:82f2]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 21
	Region 0: Memory at fbf7e000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: ohci_hcd

00:02.1 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller [10de:077c] (rev a1) (prog-if 20 [EHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:82f2]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin B routed to IRQ 22
	Region 0: Memory at fbf7fc00 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:04.0 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller [10de:077d] (rev a1) (prog-if 10 [OHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:82f2]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 22
	Region 0: Memory at fbf7d000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: ohci_hcd

00:04.1 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller [10de:077e] (rev a1) (prog-if 20 [EHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:82f2]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin B routed to IRQ 23
	Region 0: Memory at fbf7f800 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:06.0 IDE interface [0101]: nVidia Corporation MCP78S [GeForce 8200] IDE [10de:0759] (rev a1) (prog-if 8a [Master SecP PriP])
	Subsystem: ASUSTeK Computer Inc. Device [1043:82f2]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
	Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
	Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
	Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
	Region 4: I/O ports at ffa0 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: AMD_IDE

00:07.0 Audio device [0403]: nVidia Corporation MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio [10de:0774] (rev a1)
	Subsystem: ASUSTeK Computer Inc. Device [1043:829f]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (500ns min, 1250ns max)
	Interrupt: pin A routed to IRQ 21
	Region 0: Memory at fbf78000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: HDA Intel

00:08.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge [10de:075a] (rev a1) (prog-if 01 [Subtractive decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:09.0 SATA controller [0106]: nVidia Corporation MCP78S [GeForce 8200] AHCI Controller [10de:0ad4] (rev a2) (prog-if 01 [AHCI 1.0])
	Subsystem: ASUSTeK Computer Inc. Device [1043:82f2]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 27
	Region 0: I/O ports at e480 [size=8]
	Region 1: I/O ports at e400 [size=4]
	Region 2: I/O ports at e080 [size=8]
	Region 3: I/O ports at e000 [size=4]
	Region 4: I/O ports at dc00 [size=16]
	Region 5: Memory at fbf76000 (32-bit, non-prefetchable) [size=8K]
	Capabilities: <access denied>
	Kernel driver in use: ahci

00:0a.0 Ethernet controller [0200]: nVidia Corporation MCP77 Ethernet [10de:0760] (rev a2)
	Subsystem: ASUSTeK Computer Inc. Device [1043:82f2]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (250ns min, 5000ns max)
	Interrupt: pin A routed to IRQ 28
	Region 0: Memory at fbf7c000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at d880 [size=8]
	Region 2: Memory at fbf7f400 (32-bit, non-prefetchable) [size=256]
	Region 3: Memory at fbf7f000 (32-bit, non-prefetchable) [size=16]
	Capabilities: <access denied>
	Kernel driver in use: forcedeth

00:10.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:0778] (rev a1) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	Memory behind bridge: fc000000-febfffff
	Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:12.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:075b] (rev a1) (prog-if 00 [Normal decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:13.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge [10de:077a] (rev a1) (prog-if 00 [Normal decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration [1022:1200]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map [1022:1201]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller [1022:1202]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control [1022:1203]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>

00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control [1022:1204]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

02:00.0 VGA compatible controller [0300]: nVidia Corporation NV44 [GeForce 6200 LE] [10de:0163] (rev a1) (prog-if 00 [VGA controller])
	Subsystem: ASUSTeK Computer Inc. Device [1043:820b]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 10
	Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
	Region 3: Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
	Expansion ROM at febe0000 [disabled] [size=128K]
	Capabilities: <access denied>


** USB devices:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: squeeze/sid
  APT prefers unstable
  APT policy: (700, 'unstable'), (650, 'stable'), (600, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-3-amd64 (SMP w/4 CPU cores)
Locale: LANG=fi_FI.UTF-8, LC_CTYPE=fi_FI.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.32-3-amd64 depends on:
ii  debconf [debconf-2.0]        1.5.32      Debian configuration management sy
ii  initramfs-tools [linux-initr 0.94.4      tools for generating an initramfs
ii  module-init-tools            3.12~pre2-3 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.32-3-amd64 recommends:
ii  firmware-linux-free           2.6.32-11  Binary firmware for various driver

Versions of packages linux-image-2.6.32-3-amd64 suggests:
pn  grub | lilo                   <none>     (no description available)
pn  linux-doc-2.6.32              <none>     (no description available)

Versions of packages linux-image-2.6.32-3-amd64 is related to:
pn  firmware-bnx2                 <none>     (no description available)
pn  firmware-bnx2x                <none>     (no description available)
pn  firmware-ipw2x00              <none>     (no description available)
pn  firmware-ivtv                 <none>     (no description available)
pn  firmware-iwlwifi              <none>     (no description available)
ii  firmware-linux                0.23       Binary firmware for various driver
ii  firmware-linux-nonfree        0.23       Binary firmware for various driver
pn  firmware-qlogic               <none>     (no description available)
pn  firmware-ralink               <none>     (no description available)

-- debconf information:
  linux-image-2.6.32-3-amd64/postinst/depmod-error-initrd-2.6.32-3-amd64: false
  shared/kernel-image/really-run-bootloader: true
  linux-image-2.6.32-3-amd64/prerm/removing-running-kernel-2.6.32-3-amd64: true
  linux-image-2.6.32-3-amd64/postinst/bootloader-test-error-2.6.32-3-amd64:
  linux-image-2.6.32-3-amd64/postinst/missing-firmware-2.6.32-3-amd64:
  linux-image-2.6.32-3-amd64/prerm/would-invalidate-boot-loader-2.6.32-3-amd64: true
  linux-image-2.6.32-3-amd64/postinst/bootloader-error-2.6.32-3-amd64:



--- End Message ---
--- Begin Message ---
On Sun, May 09, 2010 at 03:52:32PM +0300, Juha wrote:
> Hello,
> 
> this turned out to be a hardware problem so this bug can be closed.
> 
> Regards,
> Juha

thanks for feedback, closing.


--- End Message ---

Reply to: