Bug#580799: linux-image-2.6.32-5-sparc64: Should include pata_cmd64x driver instead of cmd64x
Package: linux-2.6
Version: 2.6.32-12
Severity: serious
Because of the IDE -> ATA transition for Squeeze the pata_cmd64x driver should
be enabled instead of the (old) cmd64x driver. AFAIK the pata_cmd64x has been
tested and is known to work correctly.
My system failed to boot after updrading to 2.6.32-12 because I had updated
my bootloader config and fstab as per the debconf dialogs, but was still
getting the /dev/hdX devices from the old driver.
-- Package-specific info:
** Version:
Linux version 2.6.32-5-sparc64 (Debian 2.6.32-12) (ben@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-10) ) #1 Mon May 3 12:15:34 UTC 2010
** Command line:
root=/dev/hda2 ro
** Not tainted
** Kernel log:
[ 34.412487] Unpacking initramfs...
[ 36.425976] Freeing initrd memory: 8542k freed
[ 36.428004] power: Control reg at 1fff1724000
[ 36.429219] audit: initializing netlink socket (disabled)
[ 36.429481] type=2000 audit(2.160:1): initialized
[ 36.430530] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 36.446641] VFS: Disk quotas dquot_6.5.2
[ 36.447294] Dquot-cache hash table entries: 1024 (order 0, 8192 bytes)
[ 36.448042] msgmni has been set to 2016
[ 36.450085] alg: No test for stdrng (krng)
[ 36.450673] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 36.450782] io scheduler noop registered
[ 36.450847] io scheduler anticipatory registered
[ 36.450913] io scheduler deadline registered
[ 36.451104] io scheduler cfq registered (default)
[ 36.451824] atyfb: 3D RAGE II+ (Mach64 GT) [0x4754 rev 0x9a]
[ 36.453534] atyfb: 2M SGRAM (1:1), 14.31818 MHz XTAL, 200 MHz PLL, 67 Mhz MCLK, 67 MHz XCLK
[ 36.516048] Console: switching to colour frame buffer device 144x56
[ 36.541375] atyfb: fb0: ATY Mach64 frame buffer device on PCI
[ 36.542671] /SUNW,ffb@1e,0: FFB at 000001fc00000000, type 51, DAC pnum[236e] rev[10] manuf_rev[1]
[ 36.556761] [drm] Initialized drm 1.1.0 20060810
[ 36.557763] /pci@1f,0/pci@1,1/ebus@1/su@14,3083f8: Keyboard port at 1fff13083f8, irq 6
[ 36.558491] /pci@1f,0/pci@1,1/ebus@1/su@14,3062f8: Mouse port at 1fff13062f8, irq 7
[ 36.559586] f0061c64: ttyS0 at MMIO 0x1fff1400000 (irq = 5) is a SAB82532 V3.2
[ 36.560168] f0061c64: ttyS1 at MMIO 0x1fff1400040 (irq = 5) is a SAB82532 V3.2
[ 36.893614] Floppy drive(s): fd0 is 1.44M
[ 36.910680] FDC 0 is a National Semiconductor PC87306
[ 36.912772] Uniform Multi-Platform E-IDE driver
[ 36.913344] ide-gd driver 1.18
[ 36.914572] mice: PS/2 mouse device common for all mice
[ 36.916206] rtc-m48t59 rtc-m48t59.0: rtc core: registered m48t59 as rtc0
[ 36.920416] TCP cubic registered
[ 36.922175] NET: Registered protocol family 10
[ 36.927110] lo: Disabled Privacy Extensions
[ 36.930640] Mobile IPv6
[ 36.930789] NET: Registered protocol family 17
[ 36.931687] registered taskstats version 1
[ 36.932518] rtc-m48t59 rtc-m48t59.0: setting system clock to 2010-05-08 17:43:06 UTC (1273340586)
[ 36.932895] Initalizing network drop monitor service
[ 37.102842] udev: starting version 153
[ 37.560607] PCI: Enabling device: (0000:01:01.1), cmd 2
[ 37.560667] sunhme.c:v3.10 August 26, 2008 David S. Miller (davem@davemloft.net)
[ 37.567765] input: Sun Type 5 keyboard as /devices/root/f005f9c0/f00601b4/f0061504/f0063594/serio0/input/input0
[ 37.570655] input: Sun Mouse as /devices/root/f005f9c0/f00601b4/f0061504/f0064df4/serio1/input/input1
[ 37.580218] eth0: HAPPY MEAL (PCI/CheerIO) 10/100BaseT Ethernet 08:00:20:9c:14:f5
[ 37.613386] cmd64x 0000:01:03.0: IDE controller (0x1095:0x0646 rev 0x03)
[ 37.627752] cmd64x 0000:01:03.0: 100% native mode on irq 14
[ 37.634742] ide0: BM-DMA at 0x1fe02c00020-0x1fe02c00027
[ 37.641890] ide1: BM-DMA at 0x1fe02c00028-0x1fe02c0002f
[ 37.649158] Probing IDE interface ide0...
[ 37.937464] hda: ST34342A, ATA DISK drive
[ 38.613346] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 38.613792] hda: MWDMA2 mode selected
[ 38.621602] Probing IDE interface ide1...
[ 38.909368] hdc: Maxtor 6E040L0, ATA DISK drive
[ 39.417005] hdd: CD-ROM 56X/AKH, ATAPI CD/DVD-ROM drive
[ 39.425289] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 39.425427] hdc: MWDMA2 mode selected
[ 39.433355] hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 39.433451] hdd: MWDMA2 mode selected
[ 39.441443] ide0 at 0x1fe02c00000-0x1fe02c00007,0x1fe02c0000a on irq 14 (serialized)
[ 39.450618] ide1 at 0x1fe02c00010-0x1fe02c00017,0x1fe02c0001a on irq 14 (serialized)
[ 39.459783] hda: max request size: 128KiB
[ 39.468269] hda: 8404830 sectors (4303 MB), CHS=8894/15/63
[ 39.477020] hda: cache flushes not supported
[ 39.486101] hda: hda1 hda2 hda3 hda4
[ 39.521765] hdc: max request size: 128KiB
[ 39.541162] hdc: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63
[ 39.550586] hdc: cache flushes supported
[ 39.561151] hdc: hdc1 hdc2 hdc3 hdc4
[ 39.780787] SCSI subsystem initialized
[ 39.995975] libata version 3.00 loaded.
[ 40.201356] ide-cd driver 5.00
[ 40.341139] ide-cd: hdd: ATAPI 52X CD-ROM drive, 192kB Cache
[ 40.350974] Uniform CD-ROM driver Revision: 3.20
[ 41.609996] kjournald starting. Commit interval 5 seconds
[ 41.619585] EXT3-fs: mounted filesystem with ordered data mode.
[ 47.038983] udev: starting version 153
[ 48.976719] parport0: PC-style at 0x1fff13043bc (0x1fff13047bc), irq 8 [PCSPP,TRISTATE]
[ 49.099625] PCI: Enabling device: (0000:02:01.0), cmd 1
[ 49.099672] PCI parallel port detected: 1592:0782, I/O at 0x1fe02000478(0x0), IRQ 15
[ 49.099730] parport1: PC-style at 0x1fe02000478, irq 15 [PCSPP,TRISTATE,EPP]
[ 49.204726] PCI parallel port detected: 1592:0782, I/O at 0x1fe02000578(0x0), IRQ 15
[ 49.204795] parport2: PC-style at 0x1fe02000578, irq 15 [PCSPP,TRISTATE,EPP]
[ 54.161226] Adding 214024k swap on /dev/hda4. Priority:-1 extents:1 across:214024k
[ 54.967687] EXT3 FS on hda2, internal journal
[ 55.920302] loop: module loaded
[ 58.453536] kjournald starting. Commit interval 5 seconds
[ 58.466122] EXT3 FS on hda1, internal journal
[ 58.476526] EXT3-fs: mounted filesystem with ordered data mode.
[ 64.110652] eth0: Link is up using internal transceiver at 100Mb/s, Full Duplex.
[ 66.836249] RPC: Registered udp transport module.
[ 66.846887] RPC: Registered tcp transport module.
[ 66.857524] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 67.150709] Slow work thread pool: Starting up
[ 67.161917] Slow work thread pool: Ready
[ 67.174581] FS-Cache: Loaded
[ 67.533204] FS-Cache: Netfs 'nfs' registered for caching
[ 67.831856] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 71.289922] eth0: no IPv6 routers present
** Model information
cpu : TI UltraSparc IIi (Sabre)
fpu : UltraSparc IIi integrated FPU
pmu : ultra12
prom : OBP 3.31.0 2001/07/25 20:36
type : sun4u
** Loaded modules:
Module Size Used by
nfsd 273696 2
exportfs 3090 1 nfsd
nfs 256969 1
lockd 60795 2 nfsd,nfs
fscache 30627 1 nfs
nfs_acl 2303 2 nfsd,nfs
auth_rpcgss 36297 2 nfsd,nfs
sunrpc 170500 12 nfsd,nfs,lockd,nfs_acl,auth_rpcgss
openpromfs 4455 1
snd_sun_cs4231 17966 0
snd_pcm 62456 1 snd_sun_cs4231
snd_seq 45280 0
snd_timer 16624 3 snd_sun_cs4231,snd_pcm,snd_seq
snd_seq_device 4877 1 snd_seq
snd 48758 5 snd_sun_cs4231,snd_pcm,snd_seq,snd_timer,snd_seq_device
soundcore 4975 1 snd
snd_page_alloc 5013 2 snd_sun_cs4231,snd_pcm
loop 11063 0
parport_pc 23763 0
parport 28747 1 parport_pc
evdev 7935 0
ext3 124832 2
jbd 34176 1 ext3
mbcache 5131 1 ext3
ide_cd_mod 26973 0
cdrom 33647 1 ide_cd_mod
ata_generic 3143 0
libata 146951 1 ata_generic
scsi_mod 132085 1 libata
ide_pci_generic 2964 0
cmd64x 4039 3
sunhme 25036 0
** PCI devices:
00:01.0 PCI bridge [0604]: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge [108e:5000] (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Region 0: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 1: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Bus: primary=00, secondary=02, subordinate=ff, sec-latency=64
I/O behind bridge: 00000000-00000fff
Memory behind bridge: 00000000-000fffff
Prefetchable memory behind bridge: 00000000-000fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
[virtual] Expansion ROM at fffffe0100000000 [disabled] [size=1]
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort+ >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:01.1 PCI bridge [0604]: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge [108e:5000] (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Region 0: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 1: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00000000-00000fff
Memory behind bridge: 00000000-000fffff
Prefetchable memory behind bridge: 00000000-000fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
[virtual] Expansion ROM at fffffe0100000000 [disabled] [size=1]
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort+ >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
01:01.0 Bridge [0680]: Sun Microsystems Computer Corp. EBUS [108e:1000] (rev 01)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (2500ns min, 6250ns max)
Region 0: Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 1: Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 2: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 3: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 4: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 5: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Expansion ROM at fffffe0100000000 [disabled] [size=1]
01:01.1 Ethernet controller [0200]: Sun Microsystems Computer Corp. Happy Meal 10/100 Ethernet [hme] [108e:1001] (rev 01)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (2500ns min, 1250ns max)
Interrupt: pin ? routed to IRQ 12
Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=28K]
Region 1: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 2: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 3: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 4: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 5: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Expansion ROM at fffffe0100000000 [disabled] [size=1]
Kernel driver in use: hme
01:02.0 VGA compatible controller [0300]: ATI Technologies Inc 3D Rage I/II 215GT [Mach64 GT] [1002:4754] (rev 9a) (prog-if 00 [VGA controller])
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 13
Region 0: Memory at e1000000 (32-bit, non-prefetchable) [size=16M]
Region 1: I/O ports at fffffe0100000000 [disabled] [size=1]
Region 2: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 3: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 4: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 5: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Expansion ROM at fffffe0100000000 [disabled] [size=1]
Kernel driver in use: atyfb
01:03.0 IDE interface [0101]: Silicon Image, Inc. PCI0646 [1095:0646] (rev 03) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Silicon Image, Inc. PCI0646 [1095:0646]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max)
Interrupt: pin A routed to IRQ 14
Region 0: I/O ports at c00000 [size=8]
Region 1: I/O ports at c00008 [size=4]
Region 2: I/O ports at c00010 [size=8]
Region 3: I/O ports at c00018 [size=4]
Region 4: I/O ports at c00020 [size=16]
Region 5: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
[virtual] Expansion ROM at fffffe0100000000 [disabled] [size=1]
Kernel driver in use: CMD64x_IDE
02:01.0 Communication controller [0782]: Syba Tech Ltd Parallel Port Card 2xEPP [1592:0782] (rev 92) (prog-if 15)
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 15
Region 0: I/O ports at 0400 [size=1K]
Region 1: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 2: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 3: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 4: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
Region 5: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
[virtual] Expansion ROM at fffffe0100000000 [disabled] [size=1]
Kernel driver in use: parport_pc
** USB devices:
not available
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: sparc (sparc64)
Kernel: Linux 2.6.32-5-sparc64
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-sparc64 depends on:
ii debconf [debconf-2.0] 1.5.32 Debian configuration management sy
ii initramfs-tools [linux-initr 0.94.4 tools for generating an initramfs
ii linux-base 2.6.32-12 Linux image base package
ii module-init-tools 3.12~pre2-3 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-sparc64 recommends:
pn firmware-linux-free <none> (no description available)
Versions of packages linux-image-2.6.32-5-sparc64 suggests:
pn fdutils <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
ii silo 1.4.14+git20100228-1 Sparc Improved LOader
Versions of packages linux-image-2.6.32-5-sparc64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-5-sparc64/postinst/missing-firmware-2.6.32-5-sparc64:
linux-image-2.6.32-5-sparc64/postinst/depmod-error-initrd-2.6.32-5-sparc64: false
linux-image-2.6.32-5-sparc64/prerm/removing-running-kernel-2.6.32-5-sparc64: true
linux-image-2.6.32-5-sparc64/prerm/would-invalidate-boot-loader-2.6.32-5-sparc64: true
linux-image-2.6.32-5-sparc64/postinst/bootloader-error-2.6.32-5-sparc64:
linux-image-2.6.32-5-sparc64/postinst/bootloader-test-error-2.6.32-5-sparc64:
Reply to: