[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#567965: marked as done (i915: KMS framebuffer fails to work, only X works)



Your message dated Thu, 6 May 2010 13:19:57 +0200
with message-id <20100506131810.GA2250@debian.org>
and subject line Re: Bug#567965: i915: KMS framebuffer fails to work, only X works
has caused the Debian Bug report #567965,
regarding i915: KMS framebuffer fails to work, only X works
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
567965: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=567965
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: linux-2.6
Version: 2.6.32-5
Severity: important

Since a few days, my screen stays black except for VT7 where X is
running. As soon as the kernel is loaded, the screen turns black
until X is loaded. When X is loaded, switching to anything else
than VT7 just causes the mouse pointer to disappear, but the
image from X is still displayed.

I don't know when exactly this started to happen, but I
know that my last kernel update was 2.6.32-3 => 2.6.32-5.


-- Package-specific info:
** Version:
Linux version 2.6.32-trunk-amd64 (Debian 2.6.32-5) (ben@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sun Jan 10 22:40:40 UTC 2010

** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-trunk-amd64 root=UUID=67091a05-bf38-4136-b876-09e4b81a44bc ro quiet

** Not tainted

** Kernel log:
[   17.289425] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[   17.289440] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   17.289494] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   17.335801] Bluetooth: Core ver 2.15
[   17.338847] NET: Registered protocol family 31
[   17.338850] Bluetooth: HCI device and connection manager initialized
[   17.338853] Bluetooth: HCI socket layer initialized
[   17.343023] Bluetooth: Generic Bluetooth USB driver ver 0.6
[   17.343167] usbcore: registered new interface driver btusb
[   17.356896] phy0: Selected rate control algorithm 'iwl-3945-rs'
[   17.397928] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000
[   17.415983] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[   17.438975] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[   17.843912] name_count maxed, losing inode data: dev=00:07, inode=4547
[   17.843928] name_count maxed, losing inode data: dev=00:05, inode=4
[   17.843934] name_count maxed, losing inode data: dev=00:05, inode=4
[   17.844612] name_count maxed, losing inode data: dev=00:07, inode=8
[   17.844617] name_count maxed, losing inode data: dev=00:07, inode=4552
[   17.844633] name_count maxed, losing inode data: dev=00:05, inode=4
[   17.844640] name_count maxed, losing inode data: dev=00:05, inode=4
[   17.845425] name_count maxed, losing inode data: dev=00:07, inode=8
[   17.845430] name_count maxed, losing inode data: dev=00:07, inode=4558
[   17.845446] name_count maxed, losing inode data: dev=00:05, inode=4
[   17.845453] name_count maxed, losing inode data: dev=00:05, inode=4
[   17.847392] name_count maxed, losing inode data: dev=00:07, inode=8
[   17.847398] name_count maxed, losing inode data: dev=00:07, inode=4576
[   17.847417] name_count maxed, losing inode data: dev=00:05, inode=4
[   17.847424] name_count maxed, losing inode data: dev=00:05, inode=4
[   17.848419] name_count maxed, losing inode data: dev=00:07, inode=8
[   17.848425] name_count maxed, losing inode data: dev=00:07, inode=4588
[   17.848443] name_count maxed, losing inode data: dev=00:05, inode=4
[   17.848450] name_count maxed, losing inode data: dev=00:05, inode=4
[   17.849787] name_count maxed, losing inode data: dev=00:07, inode=8
[   17.849793] name_count maxed, losing inode data: dev=00:07, inode=4600
[   17.849800] loop: module loaded
[   17.859646] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   18.133588] EXT4-fs (sda5): mounted filesystem with ordered data mode
[   18.216617] Adding 1024280k swap on /swap.  Priority:-1 extents:39 across:9918340k 
[   19.612777] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[   19.612782] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance
[   19.612784] vboxdrv: counter framework which can generate NMIs is active. You have to prevent
[   19.612786] vboxdrv: the usage of hardware performance counters by
[   19.612787] vboxdrv:   echo 2 > /proc/sys/kernel/perf_counter_paranoid
[   19.617905] vboxdrv: Found 2 processor cores.
[   19.617973] VBoxDrv: dbg - g_abExecMemory=ffffffffa04e41a0
[   19.617996] vboxdrv: fAsync=0 offMin=0x150 offMax=0x1440
[   19.618045] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   19.618048] vboxdrv: Successfully loaded version 3.1.2_OSE (interface 0x00100001).
[   19.659880] vboxNetAdpOpen returns 0
[   19.717301] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X
[   19.772104] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X
[   19.772398] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   20.046493] fuse init (API version 7.13)
[   20.257436] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input9
[   27.665352] Bluetooth: L2CAP ver 2.14
[   27.665358] Bluetooth: L2CAP socket layer initialized
[   27.672809] Bluetooth: RFCOMM TTY layer initialized
[   27.672814] Bluetooth: RFCOMM socket layer initialized
[   27.672816] Bluetooth: RFCOMM ver 1.11
[   27.778921] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   27.778924] Bluetooth: BNEP filters: protocol multicast
[   27.787495] Bridge firewalling registered
[   27.797060] Bluetooth: SCO (Voice Link) ver 0.6
[   27.797063] Bluetooth: SCO socket layer initialized
[   28.155545] iwl3945 0000:10:00.0: firmware: requesting iwlwifi-3945-2.ucode
[   28.164481] iwl3945 0000:10:00.0: loaded firmware version 15.32.2.9
[   28.211692] lp: driver loaded but no devices found
[   28.222202] ppdev: user-space parallel port driver
[   28.234537] Registered led device: iwl-phy0::radio
[   28.234561] Registered led device: iwl-phy0::assoc
[   28.234581] Registered led device: iwl-phy0::RX
[   28.234601] Registered led device: iwl-phy0::TX
[   28.246318] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   28.649136] [drm] LVDS-8: set mode 1280x800 1d
[   28.867959] [drm] TV-14: set mode NTSC 480i 0
[   29.047666] [drm] TV-14: set mode NTSC 480i 0
[   29.354390] [drm] TV-14: set mode NTSC 480i 0
[   29.534491] [drm] TV-14: set mode NTSC 480i 0
[   30.204075] vboxnet0: no IPv6 routers present
[   38.519367] type=1305 audit(1265032882.334:29536): auid=4294967295 ses=4294967295 op="remove rule" key=(null) list=4 res=1
[   38.519379] type=1305 audit(1265032882.334:29537): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 res=1
[   43.847761] padlock: VIA PadLock not detected.
[   43.865262] Intel AES-NI instructions are not detected.
[   48.104099] [drm] TV-14: set mode NTSC 480i 0
[   48.247705] [drm] TV-14: set mode NTSC 480i 0
[   48.528335] [drm] TV-14: set mode NTSC 480i 0
[   48.669821] [drm] TV-14: set mode NTSC 480i 0
[   48.984979] [drm] TV-14: set mode NTSC 480i 0
[   49.125196] [drm] TV-14: set mode NTSC 480i 0
[   70.349509] wlan0: deauthenticating from 00:1a:4f:95:62:cf by local choice (reason=3)
[   70.350958] wlan0: direct probe to AP 00:1a:4f:95:62:cf (try 1)
[   70.353627] wlan0: direct probe responded
[   70.353636] wlan0: authenticate with AP 00:1a:4f:95:62:cf (try 1)
[   70.355689] wlan0: authenticated
[   70.355728] wlan0: associate with AP 00:1a:4f:95:62:cf (try 1)
[   70.360958] wlan0: RX AssocResp from 00:1a:4f:95:62:cf (capab=0x411 status=0 aid=1)
[   70.360966] wlan0: associated
[   70.363283] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  662.018832] [drm] TV-14: set mode NTSC 480i 0
[  662.159017] [drm] TV-14: set mode NTSC 480i 0

** Model information
sys_vendor: Hewlett-Packard
product_name: HP Compaq 6720s
product_version: F.09
chassis_vendor: Hewlett-Packard
chassis_version: 
bios_vendor: Hewlett-Packard
bios_version: 68MDU Ver. F.09
board_vendor: Hewlett-Packard
board_name: 30D8
board_version: KBC Version 83.0E

** Loaded modules:
Module                  Size  Used by
cbc                     2539  17 
cryptd                  5366  0 
aes_x86_64              7340  19 
aes_generic            25714  1 aes_x86_64
ecryptfs               79329  1 
ppdev                   5030  0 
lp                      7462  0 
parport                27938  2 ppdev,lp
sco                     7193  2 
bridge                 39582  0 
stp                     1440  1 bridge
bnep                    9395  2 
rfcomm                 29501  8 
l2cap                  24656  16 bnep,rfcomm
binfmt_misc             6431  1 
acpi_cpufreq            5555  0 
cpufreq_stats           2659  0 
cpufreq_userspace       1992  0 
cpufreq_powersave        902  0 
cpufreq_conservative     5162  0 
uinput                  6376  1 
fuse                   50078  3 
vboxnetflt              9978  0 
vboxnetadp              4225  0 
vboxdrv              1710310  2 vboxnetflt,vboxnetadp
sg                     18728  0 
loop                   11767  0 
joydev                  8411  0 
snd_hda_codec_analog    64530  1 
btusb                   9785  0 
arc4                    1274  2 
bluetooth              41795  7 sco,bnep,rfcomm,l2cap,btusb
ecb                     1841  3 
snd_hda_intel          18147  1 
snd_hda_codec          54212  2 snd_hda_codec_analog,snd_hda_intel
snd_hwdep               5364  1 snd_hda_codec
snd_pcm                60615  2 snd_hda_intel,snd_hda_codec
snd_seq                42769  0 
snd_timer              15502  2 snd_pcm,snd_seq
snd_seq_device          4477  1 snd_seq
container               2389  0 
snd                    44718  10 snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
battery                 4998  0 
iwl3945                52590  0 
iwlcore                77494  1 iwl3945
mac80211              135407  2 iwl3945,iwlcore
led_class               2401  2 iwl3945,iwlcore
wmi                     4307  0 
serio_raw               3752  0 
ac                      2192  0 
pcspkr                  1699  0 
psmouse                49521  0 
cfg80211              101253  3 iwl3945,iwlcore,mac80211
rfkill                 12996  5 bluetooth,cfg80211
evdev                   7336  14 
soundcore               4598  1 snd
snd_page_alloc          6217  2 snd_hda_intel,snd_pcm
processor              29479  3 acpi_cpufreq
ext4                  285067  2 
mbcache                 4970  1 ext4
jbd2                   66855  1 ext4
crc16                   1319  2 l2cap,ext4
dm_mod                 53658  0 
ide_cd_mod             24744  0 
cdrom                  29399  1 ide_cd_mod
uhci_hcd               18457  0 
ata_generic             2983  0 
ide_pci_generic         2788  0 
sd_mod                 29673  3 
crc_t10dif              1276  1 sd_mod
piix                    4568  0 
ahci                   31494  2 
ehci_hcd               30578  0 
ide_core               76802  3 ide_cd_mod,ide_pci_generic,piix
libata                131655  2 ata_generic,ahci
scsi_mod              121909  3 sg,sd_mod,libata
usbcore               121687  4 btusb,uhci_hcd,ehci_hcd
nls_base                6377  1 usbcore
e1000e                109871  0 
thermal                11674  0 
fan                     3346  0 
i915                  247359  1 
drm_kms_helper         18883  1 i915
i2c_algo_bit            4225  1 i915
button                  4634  1 i915
video                  17445  1 i915
thermal_sys            11878  4 processor,thermal,fan,video
output                  1692  1 video
drm                   137190  3 i915,drm_kms_helper
i2c_core               15584  3 i915,i2c_algo_bit,drm
intel_agp              25521  1 
agpgart                24733  2 drm,intel_agp

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c)
	Subsystem: Hewlett-Packard Company Device [103c:30d8]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 0c) (prog-if 00 [VGA controller])
	Subsystem: Hewlett-Packard Company Device [103c:30d8]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 26
	Region 0: Memory at e0400000 (64-bit, non-prefetchable) [size=1M]
	Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
	Region 4: I/O ports at 2000 [size=8]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: <access denied>
	Kernel driver in use: i915

00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a03] (rev 0c)
	Subsystem: Hewlett-Packard Company Device [103c:30d8]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Region 0: Memory at e0500000 (64-bit, non-prefetchable) [size=1M]
	Capabilities: <access denied>

00:19.0 Ethernet controller [0200]: Intel Corporation 82562GT 10/100 Network Connection [8086:10c4] (rev 03)
	Subsystem: Hewlett-Packard Company Device [103c:30d8]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 27
	Region 0: Memory at e0600000 (32-bit, non-prefetchable) [size=128K]
	Region 1: Memory at e0620000 (32-bit, non-prefetchable) [size=4K]
	Region 2: I/O ports at 2020 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: e1000e

00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 03) (prog-if 00 [UHCI])
	Subsystem: Hewlett-Packard Company Device [103c:30d8]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 4: I/O ports at 2040 [size=32]
	Kernel driver in use: uhci_hcd

00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 03) (prog-if 20 [EHCI])
	Subsystem: Hewlett-Packard Company Device [103c:30d8]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at e0621000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03)
	Subsystem: Hewlett-Packard Company Device [103c:30d8]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at e0624000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: HDA Intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=10, subordinate=10, sec-latency=0
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: e0000000-e00fffff
	Prefetchable memory behind bridge: 0000000040000000-00000000401fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03) (prog-if 00 [UHCI])
	Subsystem: Hewlett-Packard Company Device [103c:30d8]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 20
	Region 4: I/O ports at 2060 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03) (prog-if 00 [UHCI])
	Subsystem: Hewlett-Packard Company Device [103c:30d8]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 21
	Region 4: I/O ports at 2080 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03) (prog-if 00 [UHCI])
	Subsystem: Hewlett-Packard Company Device [103c:30d8]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 4: I/O ports at 20a0 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03) (prog-if 20 [EHCI])
	Subsystem: Hewlett-Packard Company Device [103c:30d8]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 20
	Region 0: Memory at e0628000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 03)
	Subsystem: Hewlett-Packard Company Device [103c:30d8]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03) (prog-if 8a [Master SecP PriP])
	Subsystem: Hewlett-Packard Company Device [103c:30d8]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4 [size=1]
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374 [size=1]
	Region 4: I/O ports at 20c0 [size=16]
	Kernel driver in use: PIIX_IDE

00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 03) (prog-if 01 [AHCI 1.0])
	Subsystem: Hewlett-Packard Company Device [103c:30d8]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 28
	Region 0: I/O ports at 13f0 [size=8]
	Region 1: I/O ports at 15f4 [size=4]
	Region 2: I/O ports at 1370 [size=8]
	Region 3: I/O ports at 1574 [size=4]
	Region 4: I/O ports at 2100 [size=32]
	Region 5: Memory at e0629000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci

10:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02)
	Subsystem: Hewlett-Packard Company Compaq 6710b or nx9420 Notebook [103c:135c]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 29
	Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: iwl3945


** USB devices:
Bus 003 Device 002: ID 03f0:171d Hewlett-Packard Wireless (Bluetooth + WLAN) Interface [Integrated Module]
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (990, 'unstable'), (350, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-trunk-amd64 (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.32-trunk-amd64 depends on:
ii  debconf [debconf-2.0]        1.5.28      Debian configuration management sy
ii  initramfs-tools [linux-initr 0.93.4      tools for generating an initramfs
ii  module-init-tools            3.12~pre1-1 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.32-trunk-amd64 recommends:
ii  firmware-linux-free           2.6.32-5   Binary firmware for various driver

Versions of packages linux-image-2.6.32-trunk-amd64 suggests:
pn  grub | lilo                   <none>     (no description available)
pn  linux-doc-2.6.32              <none>     (no description available)

Versions of packages linux-image-2.6.32-trunk-amd64 is related to:
pn  firmware-bnx2                 <none>     (no description available)
pn  firmware-bnx2x                <none>     (no description available)
pn  firmware-ipw2x00              <none>     (no description available)
pn  firmware-ivtv                 <none>     (no description available)
ii  firmware-iwlwifi              0.22       Binary firmware for Intel Wireless
pn  firmware-linux                <none>     (no description available)
pn  firmware-linux-nonfree        <none>     (no description available)
pn  firmware-qlogic               <none>     (no description available)
pn  firmware-ralink               <none>     (no description available)

-- debconf information:
  linux-image-2.6.32-trunk-amd64/postinst/bootloader-error-2.6.32-trunk-amd64:
  shared/kernel-image/really-run-bootloader: true
  linux-image-2.6.32-trunk-amd64/postinst/depmod-error-initrd-2.6.32-trunk-amd64: false
  linux-image-2.6.32-trunk-amd64/prerm/removing-running-kernel-2.6.32-trunk-amd64: true
  linux-image-2.6.32-trunk-amd64/postinst/bootloader-test-error-2.6.32-trunk-amd64:
  linux-image-2.6.32-trunk-amd64/postinst/missing-firmware-2.6.32-trunk-amd64:
  linux-image-2.6.32-trunk-amd64/prerm/would-invalidate-boot-loader-2.6.32-trunk-amd64: true

-- 
Julian Andres Klode  - Debian Developer, Ubuntu Member

See http://wiki.debian.org/JulianAndresKlode and http://jak-linux.org/.

Attachment: signature.asc
Description: Digital signature


--- End Message ---
--- Begin Message ---
On Wed, May 05, 2010 at 11:56:42PM +0200, Moritz Muehlenhoff wrote:
> tags 567965 moreinfo
> thanks
> 
> On Mon, Feb 01, 2010 at 04:10:32PM +0100, Julian Andres Klode wrote:
> > Package: linux-2.6
> > Version: 2.6.32-5
> > Severity: important
> > 
> > Since a few days, my screen stays black except for VT7 where X is
> > running. As soon as the kernel is loaded, the screen turns black
> > until X is loaded. When X is loaded, switching to anything else
> > than VT7 just causes the mouse pointer to disappear, but the
> > image from X is still displayed.
> > 
> > I don't know when exactly this started to happen, but I
> > know that my last kernel update was 2.6.32-3 => 2.6.32-5.
> 
> There have been many changes to the KMS code, does this still occur with
> current sid kernel and X.org?

No, closing.

-- 
Julian Andres Klode  - Debian Developer, Ubuntu Member

See http://wiki.debian.org/JulianAndresKlode and http://jak-linux.org/.

Attachment: pgpZU2Rmzw_iL.pgp
Description: PGP signature


--- End Message ---

Reply to: