--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.26-2-686: r8169 don't function with RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
- From: Claudia Neumann <dr.claudia.neumann@gmx.de>
- Date: Sun, 13 Dec 2009 20:23:19 +0100
- Message-id: <20091213192319.8620.18222.reportbug@Compac-deb>
Package: linux-image-2.6.26-2-686
Version: 2.6.26-19lenny2
Severity: important
Tags: patch
Kernel modul r8169 doesn't function with Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02). I downloaded the driver from
http://download1.opendrivers.com/uploaddrv/network/realtek/r8101-1.014.00.tar.bz2, compiled and installed. Nevertheless I had problems with the driver r8169: after
reboot the r8169 will always be loaded instead of the r8101 modul. I changed
grep r8101 *
modules.alias:alias pci:v000010ECd00008136sv*sd*bc*sc*i* r8101
modules.dep:/lib/modules/2.6.26-2-686/kernel/drivers/net/r8101.ko:
modules.pcimap:r8101 0x000010ec 0x00008136 0xffffffff 0xffffffff 0x00000000 0x00000000 0x0
Nevertheless the r8169 modul will be there after reboot. I have to rmmod r8169 and modprobe r8101 after each reboot.
-- Package-specific info:
** Version:
Linux version 2.6.26-2-686 (Debian 2.6.26-19lenny2) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Wed Nov 4 20:45:37 UTC 2009
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.26-2-686 root=/dev/sda7 vga=791
** Tainted: P (1)
** Kernel log:
[ 14.389602] EXT3-fs: sda10: couldn't mount because of unsupported optional features (240).
[ 14.500010] kjournald starting. Commit interval 5 seconds
[ 14.500129] EXT3 FS on sda11, internal journal
[ 14.500129] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.537085] kjournald starting. Commit interval 5 seconds
[ 14.537215] EXT3 FS on sda12, internal journal
[ 14.537215] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.589520] kjournald starting. Commit interval 5 seconds
[ 14.591459] EXT3 FS on sda15, internal journal
[ 14.591459] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.365519] ACPI: PCI interrupt for device 0000:03:00.0 disabled
[ 15.426670] r8101 Fast Ethernet driver 1.013.00-NAPI loaded
[ 15.426670] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 15.426670] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 15.426670] r8101: This product is covered by one or more of the following patents: US5,307,459, US5,434,872, US5,732,094, US6,570,884, US6,115,776, and US6,327,625.
[ 15.426670] eth0: Identified chip type is 'RTL8103E'.
[ 15.426670] eth0: RTL8101E at 0xf89cc000, 00:26:9e:36:b9:b2, IRQ 17
[ 15.429147] r8101 Copyright (C) 2009 Realtek NIC software team <nicfae@realtek.com>
[ 15.429149] This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
[ 15.429150] This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
[ 15.803668] r8101: eth0: link down
[ 17.253644] r8101: eth0: link up
[ 18.658698] NET: Registered protocol family 10
[ 18.658698] lo: Disabled Privacy Extensions
[ 19.126801] lp: driver loaded but no devices found
[ 19.209270] ppdev: user-space parallel port driver
[ 23.519374] Bluetooth: Core ver 2.11
[ 23.519374] NET: Registered protocol family 31
[ 23.519374] Bluetooth: HCI device and connection manager initialized
[ 23.519374] Bluetooth: HCI socket layer initialized
[ 23.556443] Bluetooth: L2CAP ver 2.9
[ 23.556543] Bluetooth: L2CAP socket layer initialized
[ 23.726132] Bluetooth: RFCOMM socket layer initialized
[ 23.726132] Bluetooth: RFCOMM TTY layer initialized
[ 23.726132] Bluetooth: RFCOMM ver 1.8
[ 24.570356] /dev/vmmon[2994]: Module vmmon: registered with major=10 minor=165
[ 24.570356] /dev/vmmon[2994]: Initial HV check: anyNotCapable=1 anyUnlocked=0 anyEnabled=0 anyDisabled=0
[ 24.570356] /dev/vmmon[2994]: Module vmmon: initialized
[ 24.578356] /dev/vmci[3006]: VMCI: Driver initialized.
[ 24.578356] /dev/vmci[3006]: Module vmci: registered with major=10 minor=60
[ 24.578356] /dev/vmci[3006]: Module vmci: initialized
[ 25.102311] /dev/vmnet: open called by PID 3045 (vmnet-bridge)
[ 25.102311] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 25.102311] /dev/vmnet: port on hub 0 successfully opened
[ 25.102311] bridge-eth0: up
[ 25.102311] bridge-eth0: attached
[ 25.240467] /dev/vmnet: open called by PID 3063 (vmnet-dhcpd)
[ 25.240467] /dev/vmnet: hub 8 does not exist, allocating memory.
[ 25.240467] /dev/vmnet: port on hub 8 successfully opened
[ 25.307539] /dev/vmnet: open called by PID 3068 (vmnet-natd)
[ 25.307539] /dev/vmnet: port on hub 8 successfully opened
[ 29.201696] eth0: no IPv6 routers present
[ 34.649204] nvidia: module license 'NVIDIA' taints kernel.
[ 34.905972] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 34.905989] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 34.906120] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.09 Wed Jun 4 23:43:17 PDT 2008
[ 37.154179] /dev/vmnet: open called by PID 3537 (vmnet-netifup)
[ 37.154179] /dev/vmnet: port on hub 8 successfully opened
[ 47.560549] vmnet8: no IPv6 routers present
[ 56.057185] usb 4-1: new low speed USB device using uhci_hcd and address 2
[ 56.232227] usb 4-1: configuration #1 chosen from 1 choice
[ 56.251828] input: SCISSORS Keyboard as /class/input/input11
[ 56.292753] input,hidraw1: USB HID v1.00 Keyboard [ SCISSORS Keyboard] on usb-0000:00:1d.0-1
[ 56.292891] usb 4-1: New USB device found, idVendor=0dc6, idProduct=9811
[ 56.292896] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 56.292900] usb 4-1: Product: SCISSORS Keyboard
[ 56.292903] usb 4-1: Manufacturer:
[ 1923.024055] /dev/vmmon[3915]: PTSC: initialized at 2100000000 Hz using TSC
[ 1923.024466] /dev/vmmon[3915]: INTELRDMSR(0x8b) = 0x00000a0700000000
[ 1923.024473] /dev/vmmon[3915]: INTELRDMSR(0x17) = 0x001c0000faf4ca23
[ 1923.026771] /dev/vmmon[3510]: INTELRDMSR(0x8b) = 0x00000a0700000000
[ 1923.026771] /dev/vmmon[3510]: INTELRDMSR(0x17) = 0x001c0000faf4ca23
[ 1933.769566] vmmon: Had to deallocate locked 1 pages from vm driver f66b4000
[ 1933.769566] vmmon: Had to deallocate AWE 16 pages from vm driver f66b4000
[ 1942.714493] /dev/vmmon[3921]: PTSC: initialized at 2100000000 Hz using TSC
[ 1942.718491] /dev/vmmon[3921]: INTELRDMSR(0x8b) = 0x00000a0700000000
[ 1942.718491] /dev/vmmon[3921]: INTELRDMSR(0x17) = 0x001c0000faf4ca23
[ 1942.718491] /dev/vmmon[3866]: INTELRDMSR(0x8b) = 0x00000a0700000000
[ 1942.718495] /dev/vmmon[3866]: INTELRDMSR(0x17) = 0x001c0000faf4ca23
[ 1965.026210] /dev/vmnet: open called by PID 3924 (vmware-vmx)
[ 1965.026234] /dev/vmnet: port on hub 8 successfully opened
[ 1977.037247] /dev/vmnet: open called by PID 3924 (vmware-vmx)
[ 1977.037247] /dev/vmnet: port on hub 8 successfully opened
[ 2121.228834] usb 4-1: USB disconnect, address 2
[ 2189.682140] CE: hpet increasing min_delta_ns to 15000 nsec
[ 2189.922291] usb 4-1: new low speed USB device using uhci_hcd and address 3
[ 2190.096776] usb 4-1: configuration #1 chosen from 1 choice
[ 2190.118861] input: SCISSORS Keyboard as /class/input/input12
[ 2190.119880] input,hidraw1: USB HID v1.00 Keyboard [ SCISSORS Keyboard] on usb-0000:00:1d.0-1
[ 2190.120021] usb 4-1: New USB device found, idVendor=0dc6, idProduct=9811
[ 2190.120029] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2190.120033] usb 4-1: Product: SCISSORS Keyboard
[ 2190.120035] usb 4-1: Manufacturer:
[ 2497.142481] CE: hpet increasing min_delta_ns to 22500 nsec
[ 9231.226605] rtc: lost 1 interrupts
[ 9884.610431] rtc: lost 1 interrupts
[11468.792190] /dev/vmnet: open called by PID 3924 (vmware-vmx)
[11468.792190] /dev/vmnet: port on hub 8 successfully opened
[11470.270744] vmmon: Had to deallocate locked 100882 pages from vm driver f6885e00
[11470.273565] vmmon: Had to deallocate AWE 4593 pages from vm driver f6885e00
** Loaded modules:
Module Size Used by
nvidia 7086148 26
vmnet 33664 9
vmci 43988 0
vmmon 60400 0
rfcomm 28272 0
l2cap 17248 5 rfcomm
bluetooth 44996 4 rfcomm,l2cap
ppdev 6468 0
parport_pc 22500 0
lp 8164 0
parport 30988 3 ppdev,parport_pc,lp
ipv6 235396 33
acpi_cpufreq 6796 1
cpufreq_conservative 5960 0
cpufreq_powersave 1856 0
cpufreq_ondemand 6476 1
cpufreq_userspace 3172 0
cpufreq_stats 3776 0
freq_table 4224 3 acpi_cpufreq,cpufreq_ondemand,cpufreq_stats
r8101 27792 0
fuse 42908 11
loop 12748 0
joydev 8480 0
snd_hda_intel 325720 5
snd_pcm_oss 32800 0
snd_mixer_oss 12320 1 snd_pcm_oss
snd_pcm 62660 3 snd_hda_intel,snd_pcm_oss
snd_seq_dummy 2660 0
snd_seq_oss 24992 0
uvcvideo 45800 0
snd_seq_midi 5728 0
snd_rawmidi 18496 1 snd_seq_midi
compat_ioctl32 1312 1 uvcvideo
snd_seq_midi_event 6432 2 snd_seq_oss,snd_seq_midi
videodev 27520 1 uvcvideo
snd_seq 41456 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
v4l1_compat 12260 2 uvcvideo,videodev
snd_timer 17800 3 snd_pcm,snd_seq
psmouse 32336 0
snd_seq_device 6380 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
pcspkr 2432 0
serio_raw 4740 0
i2c_i801 7920 0
snd 45636 17 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
i2c_core 19828 2 nvidia,i2c_i801
soundcore 6368 1 snd
snd_page_alloc 7816 2 snd_hda_intel,snd_pcm
video 16464 6
output 2912 1 video
wmi 6440 0
battery 10180 0
ac 4196 0
button 6096 0
intel_agp 22524 0
agpgart 28808 2 nvidia,intel_agp
evdev 8000 10
ext3 105576 6
jbd 39476 1 ext3
mbcache 7108 1 ext3
sg 26964 0
sr_mod 13316 0
cdrom 30176 1 sr_mod
sd_mod 22200 13
usbhid 35904 0
hid 33184 1 usbhid
ff_memless 4392 1 usbhid
ahci 23596 12
libata 140448 1 ahci
scsi_mod 129548 4 sg,sr_mod,sd_mod,libata
dock 8304 1 libata
ehci_hcd 28428 0
uhci_hcd 18672 0
usbcore 118192 5 uvcvideo,usbhid,ehci_hcd,uhci_hcd
thermal 15228 0
processor 32576 4 acpi_cpufreq,thermal
fan 4196 0
thermal_sys 10856 4 video,thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
Subsystem: Hewlett-Packard Company Device [103c:306c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: intel-agp
00:01.0 PCI bridge [0604]: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port [8086:2a41] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: d0000000-d2ffffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:306c]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 50e0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:306c]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 50c0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:306c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 0: Memory at d7005c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:306c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at d7000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: d6000000-d6ffffff
Prefetchable memory behind bridge: 00000000d3000000-00000000d3ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d5000000-d5ffffff
Prefetchable memory behind bridge: 00000000d4000000-00000000d4ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:306c]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 50a0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:306c]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 5080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:306c]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at 5060 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:306c]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 5040 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:306c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at d7005800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller [8086:2919] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:306c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation ICH9M/M-E SATA AHCI Controller [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device [103c:306c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 220
Region 0: I/O ports at 5108 [size=8]
Region 1: I/O ports at 5114 [size=4]
Region 2: I/O ports at 5100 [size=8]
Region 3: I/O ports at 5110 [size=4]
Region 4: I/O ports at 5020 [size=32]
Region 5: Memory at d7005000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:306c]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at d7006000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 5000 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
00:1f.6 Signal processing controller [1180]: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem [8086:2932] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:306c]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 11
Region 0: Memory at d7004000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
01:00.0 VGA compatible controller [0300]: nVidia Corporation Device [10de:06ef] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:306c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d2000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at d0000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at 4000 [size=128]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidiafb, nvidia
02:00.0 Network controller [0280]: Atheros Communications Inc. Device [168c:002b] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:3040]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d6000000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:306c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at 2000 [size=256]
Region 2: Memory at d4010000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at d4000000 (64-bit, prefetchable) [size=64K]
[virtual] Expansion ROM at d4020000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: r8101
Kernel modules: r8101, r8169
-- System Information:
Debian Release: 5.0.3
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-2-686 (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-2-686 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.26-2-686 recommends:
ii libc6-i686 2.7-18 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.26-2-686 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information excluded
--- End Message ---