Bug#580028: linux-image-2.6.32-4-686: Can not mount cdroms, no dmesg output
Package: linux-2.6
Version: 2.6.32-11
Severity: normal
Tags: sid
Hi, I'm opening a new report as requested in #577534. My cdrom is working again (I can boot from a cd live)
But I can't mount the same cdrom which can boot.
No messages in dmesg.
# dmesg -c
# LANG=C mount /dev/cdrom1 /media/cdrom
mount: /dev/sr0: unknown device
# LANG=C mount -t iso9660 /dev/cdrom1 /media/cdrom
mount: no medium found on /dev/sr0
# isoinfo -f -i /dev/scd0
Errno: 5 (Input/output error), test unit ready scsi sendcmd: no error
CDB: 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0E 00 00 00 00 3A 00 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 20s
isoinfo: No such file or directory. Unable to open /dev/scd0
# ls -l /sys/block/
total 0
lrwxrwxrwx 1 root root 0 may 3 09:42 dm-0 -> ../devices/virtual/block/dm-0
lrwxrwxrwx 1 root root 0 may 3 09:42 dm-1 -> ../devices/virtual/block/dm-1
lrwxrwxrwx 1 root root 0 may 3 09:42 dm-10 -> ../devices/virtual/block/dm-10
lrwxrwxrwx 1 root root 0 may 3 09:42 dm-11 -> ../devices/virtual/block/dm-11
lrwxrwxrwx 1 root root 0 may 3 09:42 dm-12 -> ../devices/virtual/block/dm-12
lrwxrwxrwx 1 root root 0 may 3 09:42 dm-13 -> ../devices/virtual/block/dm-13
lrwxrwxrwx 1 root root 0 may 3 09:42 dm-14 -> ../devices/virtual/block/dm-14
lrwxrwxrwx 1 root root 0 may 3 09:42 dm-15 -> ../devices/virtual/block/dm-15
lrwxrwxrwx 1 root root 0 may 3 09:42 dm-16 -> ../devices/virtual/block/dm-16
lrwxrwxrwx 1 root root 0 may 3 09:42 dm-17 -> ../devices/virtual/block/dm-17
lrwxrwxrwx 1 root root 0 may 3 09:42 dm-18 -> ../devices/virtual/block/dm-18
lrwxrwxrwx 1 root root 0 may 3 09:42 dm-19 -> ../devices/virtual/block/dm-19
lrwxrwxrwx 1 root root 0 may 3 09:42 dm-2 -> ../devices/virtual/block/dm-2
lrwxrwxrwx 1 root root 0 may 3 09:42 dm-20 -> ../devices/virtual/block/dm-20
lrwxrwxrwx 1 root root 0 may 3 09:42 dm-21 -> ../devices/virtual/block/dm-21
lrwxrwxrwx 1 root root 0 may 3 09:42 dm-22 -> ../devices/virtual/block/dm-22
lrwxrwxrwx 1 root root 0 may 3 09:42 dm-23 -> ../devices/virtual/block/dm-23
lrwxrwxrwx 1 root root 0 may 3 09:42 dm-24 -> ../devices/virtual/block/dm-24
lrwxrwxrwx 1 root root 0 may 3 09:42 dm-25 -> ../devices/virtual/block/dm-25
lrwxrwxrwx 1 root root 0 may 3 09:42 dm-26 -> ../devices/virtual/block/dm-26
lrwxrwxrwx 1 root root 0 may 3 09:42 dm-27 -> ../devices/virtual/block/dm-27
lrwxrwxrwx 1 root root 0 may 3 09:42 dm-28 -> ../devices/virtual/block/dm-28
lrwxrwxrwx 1 root root 0 may 3 09:42 dm-29 -> ../devices/virtual/block/dm-29
lrwxrwxrwx 1 root root 0 may 3 09:42 dm-3 -> ../devices/virtual/block/dm-3
lrwxrwxrwx 1 root root 0 may 3 09:42 dm-4 -> ../devices/virtual/block/dm-4
lrwxrwxrwx 1 root root 0 may 3 09:42 dm-5 -> ../devices/virtual/block/dm-5
lrwxrwxrwx 1 root root 0 may 3 09:42 dm-6 -> ../devices/virtual/block/dm-6
lrwxrwxrwx 1 root root 0 may 3 09:42 dm-7 -> ../devices/virtual/block/dm-7
lrwxrwxrwx 1 root root 0 may 3 09:42 dm-8 -> ../devices/virtual/block/dm-8
lrwxrwxrwx 1 root root 0 may 3 09:42 dm-9 -> ../devices/virtual/block/dm-9
lrwxrwxrwx 1 root root 0 may 3 09:42 loop0 -> ../devices/virtual/block/loop0
lrwxrwxrwx 1 root root 0 may 3 09:42 loop1 -> ../devices/virtual/block/loop1
lrwxrwxrwx 1 root root 0 may 3 09:42 loop2 -> ../devices/virtual/block/loop2
lrwxrwxrwx 1 root root 0 may 3 09:42 loop3 -> ../devices/virtual/block/loop3
lrwxrwxrwx 1 root root 0 may 3 09:42 loop4 -> ../devices/virtual/block/loop4
lrwxrwxrwx 1 root root 0 may 3 09:42 loop5 -> ../devices/virtual/block/loop5
lrwxrwxrwx 1 root root 0 may 3 09:42 loop6 -> ../devices/virtual/block/loop6
lrwxrwxrwx 1 root root 0 may 3 09:42 loop7 -> ../devices/virtual/block/loop7
lrwxrwxrwx 1 root root 0 may 3 09:42 sda -> ../devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/block/sda
lrwxrwxrwx 1 root root 0 may 3 09:42 sr0 -> ../devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0/block/sr0
# lshw | grep -A12 cdrom
*-cdrom
description: DVD writer
product: DVD+-RW GSA-H53L
vendor: HL-DT-ST
physical id: 0.0.0
bus info: scsi@0:0.0.0
logical name: /dev/cdrom
logical name: /dev/cdrom1
logical name: /dev/cdrw
logical name: /dev/cdrw1
logical name: /dev/dvd
logical name: /dev/dvd1
logical name: /dev/dvdrw
logical name: /dev/dvdrw1
logical name: /dev/scd0
logical name: /dev/sr0
version: W712
serial: [HL-DT-STDVD+-RW GSA-H53LW71207/12/03 7U02
capabilities: removable audio cd-r cd-rw dvd dvd-r
configuration: ansiversion=5 status=nodisc
# dmesg
#
While I exec mount commands, I don't see any light in the dvd-writer.
When I insert the cdrom the light flashes for a minute more or less.
If I reboot my computer, I can play with this cdlive.
Can I increase dmesg level to give you more info ? How can I help with this issue ?
Thank you very much
-- Package-specific info:
** Version:
Linux version 2.6.32-4-686 (Debian 2.6.32-11) (maks@debian.org) (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Tue Apr 6 07:02:27 UTC 2010
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-4-686 root=/dev/mapper/delorian-root ro quiet
** Tainted: P (1)
* Proprietary module has been loaded.
** Kernel log:
** Model information
not available
** Loaded modules:
Module Size Used by
isofs 24608 0
ppdev 4058 0
lp 5570 0
vboxnetadp 5154 0
acpi_cpufreq 4943 0
cpufreq_stats 1940 0
cpufreq_powersave 602 0
cpufreq_conservative 4018 0
cpufreq_userspace 1480 0
fuse 43758 1
bridge 32987 0
8021q 14086 0
garp 4134 1 8021q
stp 996 2 bridge,garp
ext4 254909 1
jbd2 56091 1 ext4
crc16 1027 1 ext4
vboxnetflt 10202 0
vboxdrv 114917 2 vboxnetadp,vboxnetflt
smsc47b397 2279 0
loop 9757 0
dm_crypt 9127 0
snd_hda_codec_realtek 163166 1
snd_usb_audio 50658 2
snd_usb_lib 11033 1 snd_usb_audio
snd_seq_midi 3576 0
snd_hda_intel 16595 0
snd_seq_midi_event 3684 1 snd_seq_midi
snd_hda_codec 46002 2 snd_hda_codec_realtek,snd_hda_intel
snd_rawmidi 12505 2 snd_usb_lib,snd_seq_midi
snd_hwdep 4054 2 snd_usb_audio,snd_hda_codec
snd_pcm 47210 4 snd_usb_audio,snd_hda_intel,snd_hda_codec
snd_seq 35463 2 snd_seq_midi,snd_seq_midi_event
nvidia 8783671 28
snd_timer 12258 3 snd_pcm,snd_seq
snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq
usbhid 27980 0
hid 50629 1 usbhid
rng_core 2178 0
i2c_core 12648 1 nvidia
snd 34363 12 snd_hda_codec_realtek,snd_usb_audio,snd_hda_intel,snd_hda_codec,snd_rawmidi,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
pcspkr 1207 0
psmouse 44421 0
parport_pc 15799 1
soundcore 3450 1 snd
snd_page_alloc 5045 2 snd_hda_intel,snd_pcm
parport 22554 3 ppdev,lp,parport_pc
evdev 5609 13
button 3598 0
wmi 3575 0
serio_raw 2916 0
processor 26599 1 acpi_cpufreq
ext3 94200 6
jbd 32169 1 ext3
mbcache 3762 2 ext4,ext3
dm_mod 46078 73 dm_crypt
sg 15964 0
sr_mod 10770 0
cdrom 26487 1 sr_mod
sd_mod 25785 3
crc_t10dif 1012 1 sd_mod
ata_generic 2015 0
tg3 88261 0
uhci_hcd 16057 0
ehci_hcd 27622 0
ata_piix 17133 2
floppy 40923 0
libphy 11638 1 tg3
thermal 9206 0
thermal_sys 9378 2 processor,thermal
libata 114416 2 ata_generic,ata_piix
scsi_mod 101305 4 sg,sr_mod,sd_mod,libata
usbcore 98302 6 snd_usb_audio,snd_usb_lib,usbhid,uhci_hcd,ehci_hcd
nls_base 4541 2 isofs,usbcore
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub [8086:2770] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:3011]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port [8086:2771] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: e2000000-e51fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000e01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:3011]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at e0500000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=20, subordinate=20, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: 60000000-601fffff
Prefetchable memory behind bridge: 0000000060200000-00000000603fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=3f, subordinate=3f, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: e0200000-e04fffff
Prefetchable memory behind bridge: 0000000060400000-00000000605fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:3011]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 2000 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:3011]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 18
Region 4: I/O ports at 2020 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:3011]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 21
Region 4: I/O ports at 2040 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:3011]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 22
Region 4: I/O ports at 2060 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:3011]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at e0504000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:3011]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Device [103c:3011]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 20a0 [size=16]
Kernel driver in use: ata_piix
00:1f.2 IDE interface [0101]: Intel Corporation N10/ICH7 Family SATA IDE Controller [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Hewlett-Packard Company Device [103c:3011]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 20d0 [size=8]
Region 1: I/O ports at 20e8 [size=4]
Region 2: I/O ports at 20d8 [size=8]
Region 3: I/O ports at 20ec [size=4]
Region 4: I/O ports at 20b0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
01:00.0 VGA compatible controller [0300]: nVidia Corporation G96 [GeForce 9400 GT] [10de:0641] (rev a1) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:82be]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e4000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at e2000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at 1000 [size=128]
[virtual] Expansion ROM at e0000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nvidia
3f:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5752 Gigabit Ethernet PCI Express [14e4:1600] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:3011]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
Region 0: Memory at e0400000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3
** USB devices:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 047f:c001 Plantronics, Inc.
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (990, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-4-686 (SMP w/2 CPU cores)
Locale: LANG=es_ES.UTF-8, LC_CTYPE=es_ES.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.32-4-686 depends on:
ii debconf [debconf-2.0] 1.5.32 Debian configuration management sy
ii initramfs-tools [linux-initr 0.94.4 tools for generating an initramfs
ii linux-base 2.6.32-11 Linux image base package
ii module-init-tools 3.12~pre2-3 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-4-686 recommends:
ii firmware-linux-free 2.6.32-11 Binary firmware for various driver
ii libc6-i686 2.10.2-6 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.32-4-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-4-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-4-686/prerm/would-invalidate-boot-loader-2.6.32-4-686: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-4-686/postinst/bootloader-test-error-2.6.32-4-686:
linux-image-2.6.32-4-686/postinst/depmod-error-initrd-2.6.32-4-686: false
linux-image-2.6.32-4-686/postinst/bootloader-error-2.6.32-4-686:
linux-image-2.6.32-4-686/postinst/missing-firmware-2.6.32-4-686:
linux-image-2.6.32-4-686/prerm/removing-running-kernel-2.6.32-4-686: true
Reply to: