--- Begin Message ---
Package: linux-image
Version: 2.6.26-parisc64
Severity: Critical
Attempting to boot a 2.6.26 kernel on an HP N4000 machine (64 bit PA-RISC)
yields the following results (beginning at system startup):
<<Beginning of error>>
GSP Host Name: uninitialized
GSP> co
CO
You are now leaving the Guardian Service Processor Command Interface
and returning to the console mode. Type Ctrl B to reactivate it.
Configuration Menu: Enter command > ma
---- Main
Menu ---------------------------------------------------------------
Command Description
------- -----------
BOot [PRI|ALT|<path>] Boot from specified path
PAth [PRI|ALT] [<path>] Display or modify a path
SEArch [DIsplay|IPL] [<path>] Search for boot devices
COnfiguration menu Displays or sets boot values
INformation menu Displays hardware information
SERvice menu Displays service commands
DIsplay Redisplay the current menu
HElp [<menu>|<command>] Display help for menu or command
RESET Restart the system
----
Main Menu: Enter command or menu > bo
Interact with IPL (Y, N, or Cancel)?> y
Booting...
Boot IO Dependent Code (IODC) revision 1
HARD Booted.
palo ipl 1.14 root@duet Sat Apr 8 16:08:16 EDT 2006
Skipping extended partition 6 - beyond reach of IPL
Partition Start(MB) End(MB) Id Type
1 1 31 f0 Palo
2 32 156 83 ext2
5 157 67413 83 ext2
PALO(F0) partition contains:
0/vmlinux64 6300839 bytes @ 0x48000
Information: No console specified on kernel command line. This is normal.
PALO will choose the console currently used by firmware (serial).Current
command line:
2/vmlinux root=/dev/sda5 initrd=2/initrd.img HOME=/ console=ttyS0 TERM=vt102
0: 2/vmlinux
1: root=/dev/sda5
2: initrd=2/initrd.img
3: HOME=/
4: console=ttyS0
5: TERM=vt102
<#> edit the numbered field
'b' boot with this command line
'r' restore command line
'l' list dir
? 0 b
Command line for kernel: 'root=/dev/sda5 HOME=/ console=ttyS0 TERM=vt102
palo_kernel=2/vmlinux'
Selected kernel: /vmlinux from partition 2
Selected ramdisk: /initrd.img from partition 2
ELF64 executable
Entry 00100000 first 00100000 n 3
Segment 0 load 00100000 size 4648960 mediaptr 0x1000
Segment 1 load 005c4000 size 395160 mediaptr 0x470000
Segment 2 load 00628000 size 304384 mediaptr 0x4d1000
Loading ramdisk 6339147 bytes @ 3f9e3000...
Branching to kernel entry point 0x00100000. If this is the last
message you see, you may need to switch your console. This is
a common symptom -- search the FAQ and mailing list at parisc-linux.org
Linux version 2.6.26 (2.6.26) (root@sys0t-debian) (gcc version 4.3.2 (GCC) )
#1 SMP Mon Mar 16 07:17:55 MDT 2009
FP[0] enabled: Rev 1 Model 16
The 64-bit Kernel has started...
console [ttyB0] enabled
Initialized PDC Console for debugging.
Determining PDC firmware type: 64 bit PAT.
model 00005cc0 00000491 00000000 00000002 28f7f76d 100000f0 00000008
000000b2 000000b2
vers 00000203
CPUID vers 17 rev 8 (0x00000228)
capabilities 0x1
model 9000/800/N4000-44
Memory Ranges:
0) Start 0x0000000000000000 End 0x000000007fffffff Size 2048 MB
1) Start 0x0000000180000000 End 0x00000001ffffffff Size 2048 MB
Total Memory: 4096 MB
initrd: 7f9e3000-7ffeea4b
initrd: reserving 3f9e3000-3ffeea4b (mem_max 100000000)
SMP: bootstrap CPU ID is 0
Built 2 zonelists in Zone order, mobility grouping on. Total pages: 1034240
Kernel command line: root=/dev/sda5 HOME=/ console=ttyS0 TERM=vt102
palo_kernel=2/vmlinux
PID hash table entries: 4096 (order: 12, 32768 bytes)
Console: colour dummy device 160x64
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Memory: 4109824k/4194304k available (3121k kernel code, 83764k reserved,
1370k data, 300k init)
virtual kernel memory layout:
vmalloc : 0x0000000000008000 - 0x000000003f000000 (1007 MB)
memory : 0x0000000040000000 - 0x0000000240000000 (8192 MB)
.init : 0x0000000040628000 - 0x0000000040673000 ( 300 kB)
.data : 0x000000004040c518 - 0x0000000040563000 (1370 kB)
.text : 0x0000000040100000 - 0x000000004040c518 (3121 kB)
Security Framework initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 256
Brought up 1 CPUs
net_namespace: 1168 bytes
NET: Registered protocol family 16
EISA bus registered
Searching for devices...
Found devices:
1. Prelude W 440 at 0xfffffffffed25000 [37] { 0, 0x0, 0x5cc, 0x00004 }
2. Prelude W 440 at 0xfffffffffed2d000 [45] { 0, 0x0, 0x5cc, 0x00004 }
3. Prelude W 440 at 0xfffffffffed65000 [101] { 0, 0x0, 0x5cc, 0x00004 }
4. Prelude W 440 at 0xfffffffffed6d000 [109] { 0, 0x0, 0x5cc, 0x00004 }
5. DEW BC Runway Port at 0xfffffffffed24000 [36] { 7, 0x0, 0x584, 0x0000c }
6. DEW BC Runway Port at 0xfffffffffed2c000 [44] { 7, 0x0, 0x584, 0x0000c }
7. DEW BC Runway Port at 0xfffffffffed64000 [100] { 7, 0x0, 0x584, 0x0000c }
8. DEW BC Runway Port at 0xfffffffffed6c000 [108] { 7, 0x0, 0x584, 0x0000c }
9. Memory at 0xfffffffffedc0000 [192] { 1, 0x0, 0x090, 0x00009 }
10. IKE I/O BC Merced Port at 0xfffffffffed00000 [0] { 7, 0x0, 0x803,
0x0000c }
11. Elroy PCI Bridge at 0xffffffffbffe0000 [0/0] { 13, 0x0, 0x782, 0x0000a }
12. Elroy PCI Bridge at 0xffffffffbffe2000 [0/1] { 13, 0x0, 0x782, 0x0000a }
13. Elroy PCI Bridge at 0xffffffffbffe4000 [0/2] { 13, 0x0, 0x782, 0x0000a }
14. Elroy PCI Bridge at 0xffffffffbffe8000 [0/4] { 13, 0x0, 0x782, 0x0000a }
15. Elroy PCI Bridge at 0xffffffffbffea000 [0/5] { 13, 0x0, 0x782, 0x0000a }
16. Elroy PCI Bridge at 0xffffffffbfff0000 [0/8] { 13, 0x0, 0x782, 0x0000a }
17. Elroy PCI Bridge at 0xffffffffbfff4000 [0/10] { 13, 0x0, 0x782,
0x0000a }
18. Elroy PCI Bridge at 0xffffffffbfff8000 [0/12] { 13, 0x0, 0x782,
0x0000a }
19. IKE I/O BC Merced Port at 0xfffffffffed40000 [1] { 7, 0x0, 0x803,
0x0000c }
20. Elroy PCI Bridge at 0xfffffffffece0000 [1/0] { 13, 0x0, 0x782, 0x0000a }
21. Elroy PCI Bridge at 0xfffffffffece4000 [1/2] { 13, 0x0, 0x782, 0x0000a }
22. Elroy PCI Bridge at 0xfffffffffece8000 [1/4] { 13, 0x0, 0x782, 0x0000a }
23. Elroy PCI Bridge at 0xfffffffffecf0000 [1/8] { 13, 0x0, 0x782, 0x0000a }
24. Elroy PCI Bridge at 0xfffffffffecf4000 [1/10] { 13, 0x0, 0x782,
0x0000a }
25. Elroy PCI Bridge at 0xfffffffffecf8000 [1/12] { 13, 0x0, 0x782,
0x0000a }
Enabling PDC_PAT chassis codes support v0.05
********** VIRTUAL FRONT PANEL **********
System Boot detected
*****************************************
processor system initialization 1C00
*****************************************
************ EARLY BOOT VFP *************
End of early boot detected
*****************************************
Releasing cpu 3 now, hpa=fffffffffed6d000
FP[3] enabled: Rev 1 Model 16
CPU(s): 4 x PA8500 (PCX-W) at 440.000000 MHz
Setting cache flush threshold to 100000 (4 CPUs online)
SBA found Ike rev 2 at 0xfffffffffed00000
SBA found Ike rev 2 at 0xfffffffffed40000
proc_dir_entry 'sba_iommu' already registered
Backtrace:
[<000000004011bc58>] parisc_show_stack+0x48/0xe8
[<000000004011bd0c>] show_stack+0x14/0x20
[<00000000402c7818>] memcpy+0x28/0x40
[<00000000402243dc>] __proc_create+0xf4/0x188
[<000000004032cdf0>] driver_probe_device+0x148/0x278
[<000000004010347c>] ret_from_kernel_thread+0x24/0x40
proc_dir_entry 'sba_iommu-bitmap' already registered
Backtrace:
[<000000004011bc58>] parisc_show_stack+0x48/0xe8
[<000000004011bd0c>] show_stack+0x14/0x20
[<00000000402c7818>] memcpy+0x28/0x40
[<00000000402243dc>] __proc_create+0xf4/0x188
[<000000004032cdf0>] driver_probe_device+0x148/0x278
[<000000004010347c>] ret_from_kernel_thread+0x24/0x40
Elroy version TR2.2 (0x3) found at 0xffffffffbffe0000
Elroy version TR2.2 (0x3) found at 0xffffffffbffe2000
Elroy version TR3.0 (0x4) found at 0xffffffffbffe4000
Elroy version TR3.0 (0x4) found at 0xffffffffbffe8000
Elroy version TR3.0 (0x4) found at 0xffffffffbffea000
Elroy version TR3.0 (0x4) found at 0xffffffffbfff0000
Elroy version TR3.0 (0x4) found at 0xffffffffbfff4000
Elroy version TR3.0 (0x4) found at 0xffffffffbfff8000
Elroy version TR3.0 (0x4) found at 0xfffffffffece0000
Elroy version TR3.0 (0x4) found at 0xfffffffffece4000
Elroy version TR3.0 (0x4) found at 0xfffffffffece8000
Elroy version TR3.0 (0x4) found at 0xfffffffffecf0000
Elroy version TR3.0 (0x4) found at 0xfffffffffecf4000
PCI: Address space collision on region 0 of device 0000:d0:00.0
[70e0800:70e08ff]
Elroy version TR3.0 (0x4) found at 0xfffffffffecf8000
powersw: Soft power switch support not available.
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
Freeing initrd memory: 6190k freed
Chassis warnings not supported.
unwind_init: start = 0x404a7224, end = 0x404d19c4, entries = 10874
Performance monitoring counters enabled for Prelude W 440
audit: initializing netlink socket (disabled)
type=2000 audit(1237216652.238:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 8040
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PDC Stable Storage facility v0.30
STI GSC/PCI core graphics driver Version 0.9a
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial 0000:00:04.0: enabling device (0146 -> 0147)
0000:00:04.0: ttyS0 at MMIO 0xffffffff80000000 (irq = 70) is a 16550A
console handover: boot [ttyB0] -> real [ttyS0]
0000:00:04.0: ttyS1 at MMIO 0xffffffff80000008 (irq = 70) is a 16550A
0000:00:04.0: ttyS2 at MMIO 0xffffffff80000010 (irq = 70) is a 16550A
serial 0000:00:05.0: enabling device (0000 -> 0003)
serial 0000:00:05.0: enabling SERR and PARITY (0003 -> 0143)
0000:00:05.0: ttyS3 at MMIO 0xffffffff80003000 (irq = 71) is a 16550A
Couldn't register serial port 0000:00:05.0: -28
brd: module loaded
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Freeing unused kernel memory: <0>------------[ cut here ]------------
Badness at arch/parisc/kernel/smp.c:323
YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
PSW: 00001000000001001111111100001110 Not tainted
r00-03 000000ff0804ff0e 00000000406242a0 0000000040126378 00000000405f8740
r04-07 0000000040612aa0 0000000000000000 0000000000000001 00000000bfc60220
r08-11 000000004066d668 0000000040613aa0 0000000000000000 00000000bfc60110
r12-15 00000000406142a0 0000000000000001 00000000406202a0 0000000040622aa0
r16-19 00000000406132a0 0406152a0 00000000406152a0 0000000000000004
r20-23 0000000000000000 0000000040673000 00000000405f31a0 0000000000000001
r24-27 0000000000000001 0000000000000000 0000000000000002 0000000040612aa0
r28-31 000000000800000e 00000000bfc605a0 00000000bfc605d0 0000000000000004
sr00-03 0000000000000000 0000000000000000 0000000000000000 0000000000000000
sr04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000
IASQ: 0000000000000000 0000000000000000 IAOQ: 0000000040126388
00000000401263IR: 03ffe01f ISR: 0000000000000000 IOR: 0000000000000000
CPU: 0 CR30: 00000000bfc60000 CR31: 0000000010578000
ORIG_R28: 00000000bf801be0
IAOQ[0]: smp_call_function+0x70/0x3a0
IAOQ[1]: smp_call_function+0x74/0x3a0
RP(r2): smp_call_function+0x60/0x3a0
Backtrace:
[<00000000401556d8>] on_each_cpu+0x28/0x68
[<000000004011ad08>] flush_data_cache+0x28/0x38
[<000000004011a17c>] free_initmem+0x94/0x340
[<0000000040119324>] 0x228
[<0000000040628638>] kernel_init+0x4b8/0x508
300k freed
********** VIRTUAL FRONT PANEL **********
System Boot detected
*****************************************
processor system initialization 1C00
*****************************************
************ EARLY BOOT VFP *************
End of early boot detected
*****************************************
Begin: Loading essential drivers ... SCSI subsystem initialized
done.
Begin: Running /scripts/init-premount ... Linux Tulip driver version
1.1.15-NAPI (Feb 27, 2007)
tulip 0000:00:00.0: enabling device (0140 -> 0143)
tulip0: no phy info, aborting mtable build
tulip0: MII transceiver #1 config 1000 status 7809 advertising 0061.
eth0: Digital DS21142/43 Tulip rev 65 at MMIO 0xffffffff80004000,
00:10:83:96:71:d4, IRQ 66.
sym53c8xx 0000:00:01.0: enabling device (0000 -> 0003)
sym53c8xx 0000:00:01.0: enabling SERR and PARITY (0003 -> 0143)
sym0: <895> rev 0x1 at pci 0000:00:01.0 irq 67
sym0: PA-RISC Firmware, ID 7, Fast-40, SE, parity checking
sym0: SCSI BUS has been reset.
sym0: SCSI BUS mode change from SE to SE.
sym0: SCSI BUS has been reset.
scsi0 : sym-2.2.3
scsi 0:0:2:0: CD-ROM HP DVD-ROM 304 2.01 PQ: 0 ANSI: 2
target0:0:2: Beginning Domain Validation
target0:0:2: asynchronous
target0:0:2: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 16)
target0:0:2: Domain Validation skipping write tests
target0:0:2: Ending Domain Validation
sym53c8xx 0000:00:02.0: enabling device (0146 -> 0147)
sym1: <875> rev 0x14 at pci 0000:00:02.0 irq 68
sym1: PA-RISC Firmware, ID 7, Fast-20, SE, parity checking
sym1: SCSI BUS has been reset.
scsi1 : sym-2.2.3
scsi 1:0:6:0: Direct-Access SEAGATE ST373405LC 0003 PQ: 0 ANSI: 3
target1:0:6: tagged command queuing enabled, command queue depth 16.
target1:0:6: Beginning Domain Validation
target1:0:6: asynchronous
target1:0:6: wide asynchronous
target1:0:6: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 16)
target1:0:6: Domain Validation skipping write tests
target1:0:6: Ending Domain Validation
sym53c8xx 0000:00:02.1: enabling device (0000 -> 0003)
sym53c8xx 0000:00:02.1: enabling SERR and PARITY (0003 -> 0143)
sym2: <875> rev 0x14 at pci 0000:00:02.1 irq 69
sym2: PA-RISC Firmware, ID 7, Fast-20, SE, parity checking
sym2: SCSI BUS has been reset.
scsi2 : sym-2.2.3
scsi 2:0:6:0: Direct-Access SEAGATE ST373405LC 0003 PQ: 0 ANSI: 3
target2:0:6: tagged command queuing enabled, command queue depth 16.
target2:0:6: Beginning Domain Validation
target2:0:6: asynchronous
target2:0:6: wide asynchronous
target2:0:6: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 16)
target2:0:6: Domain Validation skipping write tests
target2:0:6: Ending Domain Validation
sym53c8xx 0000:20:00.0: enabling device (0000 -> 0003)
sym53c8xx 0000:20:00.0: enabling SERR and PARITY (0003 -> 0143)
sym3: <896> rev 0x7 at pci 0000:20:00.0 irq 72
sym3: PA-RISC Firmware, ID 7, Fast-40, LVD, parity checking
sym3: SCSI BUS has been reset.
scsi3 : sym-2.2.3
scsi 3:0:0:0: Direct-Access COMPAQ BF07288285 HPB3 PQ: 0 ANSI: 3
target3:0:0: tagged command queuing enabled, command queue depth 16.
target3:0:0: Beginning Domain Validation
target3:0:0: asynchronous
target3:0:0: wide asynchronous
target3:0:0: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31)
target3:0:0: Domain Validation skipping write tests
target3:0:0: Ending Domain Validation
scsi 3:0:1:0: Direct-Access COMPAQ BF07288285 HPB3 PQ: 0 ANSI: 3
target3:0:1: tagged command queuing enabled, command queue depth 16.
target3:0:1: Beginning Domain Validation
target3:0:1: asynchronous
target3:0:1: wide asynchronous
target3:0:1: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31)
target3:0:1: Domain Validation skipping write tests
target3:0:1: Ending Domain Validation
scsi 3:0:2:0: Direct-Access COMPAQ BF07288285 HPB3 PQ: 0 ANSI: 3
target3:0:2: tagged command queuing enabled, command queue depth 16.
target3:0:2: Beginning Domain Validation
target3:0:2: asynchronous
target3:0:2: wide asynchronous
target3:0:2: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31)
target3:0:2: Domain Validation skipping write tests
target3:0:2: Ending Domain Validation
scsi 3:0:3:0: Direct-Access COMPAQ BF07288285 HPB3 PQ: 0 ANSI: 3
target3:0:3: tagged command queuing enabled, command queue depth 16.
target3:0:3: Beginning Domain Validation
target3:0:3: asynchronous
target3:0:3: wide asynchronous
target3:0:3: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31)
target3:0:3: Domain Validation skipping write tests
target3:0:3: Ending Domain Validation
scsi 3:0:4:0: Direct-Access COMPAQ BF07288285 HPB3 PQ: 0 ANSI: 3
target3:0:4: tagged command queuing enabled, command queue depth 16.
target3:0:4: Beginning Domain Validation
target3:0:4: asynchronous
target3:0:4: wide asynchronous
target3:0:4: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31)
target3:0:4: Domain Validation skipping write tests
target3:0:4: Ending Domain Validation
scsi 3:0:5:0: Direct-Access COMPAQ BF07288285 HPB3 PQ: 0 ANSI: 3
target3:0:5: tagged command queuing enabled, command queue depth 16.
target3:0:5: Beginning Domain Validation
target3:0:5: asynchronous
target3:0:5: wide asynchronous
target3:0:5: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31)
target3:0:5: Domain Validation skipping write tests
target3:0:5: Ending Domain Validation
scsi 3:0:8:0: Direct-Access COMPAQ BF07289BC4 HPB1 PQ: 0 ANSI: 3
target3:0:8: tagged command queuing enabled, command queue depth 16.
target3:0:8: Beginning Domain Validation
target3:0:8: asynchronous
target3:0:8: wide asynchronous
target3:0:8: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31)
target3:0:8: Domain Validation skipping write tests
target3:0:8: Ending Domain Validation
scsi 3:0:15:0: Processor COMPAQ PROLIANT 4L7E*DB 2.30 PQ: 0 ANSI:
2
target3:0:15: Beginning Domain Validation
scsi 3:0:15:0: phase change 6-7 6@0025ffa0 resid=4.
target3:0:15: asynchronous
target3:0:15: Ending Domain Validation
sym53c8xx 0000:20:00.1: enabling device (0000 -> 0003)
sym53c8xx 0000:20:00.1: enabling SERR and PARITY (0003 -> 0143)
sym4: <896> rev 0x7 at pci 0000:20:00.1 irq 73
sym4: PA-RISC Firmware, ID 7, Fast-40, LVD, parity checking
sym4: SCSI BUS has been reset.
scsi4 : sym-2.2.3
scsi 4:0:0:0: Direct-Access COMPAQ BF07288285 HPB3 PQ: 0 ANSI: 3
target4:0:0: tagged command queuing enabled, command queue depth 16.
target4:0:0: Beginning Domain Validation
target4:0:0: asynchronous
target4:0:0: wide asynchronous
target4:0:0: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31)
target4:0:0: Domain Validation skipping write tests
target4:0:0: Ending Domain Validation
scsi 4:0:1:0: Direct-Access COMPAQ BF07288285 HPB3 PQ: 0 ANSI: 3
target4:0:1: tagged command queuing enabled, command queue depth 16.
target4:0:1: Beginning Domain Validation
target4:0:1: asynchronous
target4:0:1: wide asynchronous
target4:0:1: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31)
target4:0:1: Domain Validation skipping write tests
target4:0:1: Ending Domain Validation
scsi 4:0:2:0: Direct-Access COMPAQ BF07288285 HPB3 PQ: 0 ANSI: 3
target4:0:2: tagged command queuing enabled, command queue depth 16.
target4:0:2: Beginning Domain Validation
target4:0:2: asynchronous
target4:0:2: wide asynchronous
target4:0:2: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31)
target4:0:2: Domain Validation skipping write tests
target4:0:2: Ending Domain Validation
scsi 4:0:3:0: Direct-Access COMPAQ BF07288285 HPB3 PQ: 0 ANSI: 3
target4:0:3: tagged command queuing enabled, command queue depth 16.
target4:0:3: Beginning Domain Validation
target4:0:3: asynchronous
target4:0:3: wide asynchronous
target4:0:3: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31)
target4:0:3: Domain Validation skipping write tests
target4:0:3: Ending Domain Validation
scsi 4:0:4:0: Direct-Access COMPAQ BF07288285 HPB3 PQ: 0 ANSI: 3
target4:0:4: tagged command queuing enabled, command queue depth 16.
target4:0:4: Beginning Domain Validation
target4:0:4: asynchronous
target4:0:4: wide asynchronous
target4:0:4: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31)
target4:0:4: Domain Validation skipping write tests
target4:0:4: Ending Domain Validation
scsi 4:0:5:0: Direct-Access COMPAQ BF07288285 HPB3 PQ: 0 ANSI: 3
target4:0:5: tagged command queuing enabled, command queue depth 16.
target4:0:5: Beginning Domain Validation
target4:0:5: asynchronous
target4:0:5: wide asynchronous
target4:0:5: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31)
target4:0:5: Domain Validation skipping write tests
target4:0:5: Ending Domain Validation
scsi 4:0:8:0: Direct-Access COMPAQ BF07288285 HPB3 PQ: 0 ANSI: 3
target4:0:8: tagged command queuing enabled, command queue depth 16.
target4:0:8: Beginning Domain Validation
target4:0:8: asynchronous
target4:0:8: wide asynchronous
target4:0:8: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31)
target4:0:8: Domain Validation skipping write tests
target4:0:8: Ending Domain Validation
sym53c8xx 0000:d0:00.0: enabling device (0000 -> 0003)
sym53c8xx 0000:d0:00.0: enabling SERR and PARITY (0003 -> 0143)
************* SYSTEM ALERT **************
SYSTEM NAME: uninitialized
DATE: 03/16/2009 TIME: 15:18:15
ALERT LEVEL: 7 = reserved
REASON FOR ALERT
SOURCE: 0 = unknown, no source stated
SOURCE DETAIL: 0 = unknown, no source stated SOURCE ID: FF
PROBLEM DETAIL: 0 = no problem detail
LEDs: RUN ATTENTION FAULT REMOTE POWER
ON FLASH OFF ON ON
0x0000187000FF6292 00000000 00000000 - type 0 = Data Field Unused
0x5800187000FF6292 00006D02 100F120F - type 11 = Timestamp 03/16/2009
15:18:15
A: ack read of this entry - X: Disable all future alert messages
Anything else skip redisplay the log entry
->Choice:a
*****************************************
<<End of error message>>
We found a similiar error at http://lkml.org/lkml/2008/7/16/327 that
explains the inability to boot a 2.6.26 kernel that has the
CONFIG_PRINTK_TIME flag set to y. We recompiled a version of that kernel
with the flag set to n (it was already set to that value) and we get a
little farther in the boot sequence but end up with the same error message.
What/how can we get this version of the kernel to boot? We are attempting
to run Debian 5.0 but end up with a non-working df if we use kernel
2.6.18-6-parisc64 (which is the version of the kernel that is installed with
4.0). 2.6.18-6 is the only other linux kernel that we have successfully
booted with.
Thanks,
Marc
--- End Message ---