--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.32-3-686-bigmem: iwlagn crashed during hibernation sequence
- From: Karol Szafranski <yoozeq2001@tlen.pl>
- Date: Tue, 06 Apr 2010 21:12:56 +0200
- Message-id: <20100406191256.3710.80478.reportbug@magnez>
Package: linux-2.6
Version: 2.6.32-9
Severity: important
Tags: squeeze
iwlagn (or something associated with it) crashed during hibernation sequence on
Dell Latitude E5400 with Intel Wireless WiFi Link 5100 card. [ 5991.682751]
iwlagn 0000:0c:00.0: Microcode SW error detected. Restarting 0x2000000. [
5991.739001] Registered led device: iwl-phy0::radio [ 5991.739051] Registered
led device: iwl-phy0::assoc [ 5991.739093] Registered led device: iwl-phy0::RX
[ 5991.739134] Registered led device: iwl-phy0::TX [14080.131975] [drm] TV-25:
set mode 848x480 2c [14080.272371] [drm] LVDS-8: set mode 1280x800 2d
[14080.392989] [drm] TV-25: set mode 848x480 2c [14083.071743] [drm] TV-25: set
mode NTSC 480i 0 [14083.253033] [drm] TV-25: set mode NTSC 480i 0
[14119.124098] wlan0: deauthenticating from 00:1d:0f:e2:85:8e by local choice
(reason=3) [14119.210779] ------------[ cut here ]------------ [14119.210823]
WARNING: at /build/buildd-linux-2.6_2.6.32-9-i386-0BnCTJ/linux-2.6-2.6.32/debia
n/build/source_i386_none/net/wireless/core.c:614 wdev_cleanup_w ork+0x42/0x9c
[cfg80211]() [14119.210832] Hardware name: Latitude E5400
[14119.210836] Modules linked in: nls_utf8 nls_cp437 vfat fat usb_storage ppdev
lp parport sco bridge stp bnep rfcomm l2cap crc16 bluetooth acpi_cpufreq cpuf
req_conservative cpufreq_stats cpufreq_powersave cpufreq_userspace binfmt_misc
uinput fuse firewire_sbp2 loop reiserfs snd_hda_codec_intelhdmi snd_hda_codec_
idt snd_hda_intel snd_hda_codec arc4 snd_hwdep snd_pcm_oss snd_mixer_oss zaurus
ecb snd_pcm pcmcia cdc_ether iwlagn usbnet cdc_wdm cdc_acm snd_seq_midi iwlco
re mii snd_rawmidi snd_seq_midi_event snd_seq yenta_socket mac80211 snd_timer
rsrc_nonstatic snd_seq_device pcmcia_core cfg80211 snd psmouse pcspkr dell_lapt
op evdev i2c_i801 serio_raw wmi dcdbas rfkill soundcore battery ac processor
snd_page_alloc ext3 jbd mbcache sg sr_mod sd_mod crc_t10dif cdrom ahci libata
i9 15 drm_kms_helper drm i2c_algo_bit uhci_hcd sdhci_pci sdhci firewire_ohci
i2c_core intel_agp agpgart button ehci_hcd scsi_mod tg3 libphy mmc_core
led_class f irewire_core video crc_itu_t output usbcore nls_base thermal fan
thermal_sys [last unloaded: scsi_wait_scan] [14119.211050] Pid: 9, comm:
events/0 Not tainted 2.6.32-3-686-bigmem #1 [14119.211056] Call Trace:
[14119.211071] [<c1036b4d>] ? warn_slowpath_common+0x5e/0x8a [14119.211080]
[<c1036b83>] ? warn_slowpath_null+0xa/0xc [14119.211101] [<f9196424>] ?
wdev_cleanup_work+0x42/0x9c [cfg80211] [14119.211111] [<c1047b43>] ?
worker_thread+0x141/0x1bd [14119.211127] [<f91963e2>] ?
wdev_cleanup_work+0x0/0x9c [cfg80211] [14119.211139] [<c104a882>] ?
autoremove_wake_function+0x0/0x2d [14119.211147] [<c1047a02>] ?
worker_thread+0x0/0x1bd [14119.211155] [<c104a650>] ? kthread+0x61/0x66
[14119.211163] [<c104a5ef>] ? kthread+0x0/0x66 [14119.211173] [<c1008ba7>] ?
kernel_thread_helper+0x7/0x10 [14119.211178] ---[ end trace b69bf8ce9fc0434c
]--- After resuming NetworkManager was unable to reconnect to AP, producing:
[14149.541705] wlan0: deauthenticating from 00:1d:0f:e2:85:8e by local choice
(reason=3) [14182.441673] wlan0: deauthenticating from 00:1d:0f:e2:85:8e by
local choice (reason=3) [14197.453164] wlan0: deauthenticating from
00:1d:0f:e2:85:8e by local choice (reason=3) Removing and loading back iwlagn
module fixed the problem. So far it happened only once, but since dmesg
includes backtrace, maybe you will find it useful.
-- Package-specific info:
** Version:
Linux version 2.6.32-3-686-bigmem (Debian 2.6.32-9) (maks@debian.org) (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Thu Feb 25 06:54:30 UTC 2010
** Command line:
BOOT_IMAGE=/vmlinuz root=/dev/sda1 resume=/dev/sda2
** Tainted: W (512)
* Taint on warning.
** Kernel log:
[14123.814068] ahci 0000:00:1f.2: setting latency timer to 64
[14124.032230] sdhci-pci 0000:02:01.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[14124.032264] firewire_core: skipped bus generations, destroying all nodes
[14124.140222] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[14124.143529] ata2.00: configured for UDMA/100
[14124.148222] ata6: SATA link down (SStatus 0 SControl 300)
[14124.156221] ata5: SATA link down (SStatus 0 SControl 300)
[14124.532251] firewire_core: rediscovered device fw0
[14124.536232] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[14124.583344] ata1.00: configured for UDMA/133
[14124.736223] usb 3-6: reset high speed USB device using ehci_hcd and address 2
[14124.930995] cdc_acm 3-6:1.1: no reset_resume for driver cdc_acm?
[14124.930999] cdc_acm 3-6:1.2: no reset_resume for driver cdc_acm?
[14124.931002] cdc_acm 3-6:1.3: no reset_resume for driver cdc_acm?
[14124.931005] cdc_acm 3-6:1.4: no reset_resume for driver cdc_acm?
[14124.931010] cdc_ether 3-6:1.7: no reset_resume for driver cdc_ether?
[14124.931014] cdc_ether 3-6:1.8: no reset_resume for driver cdc_ether?
[14124.931017] cdc_acm 3-6:1.9: no reset_resume for driver cdc_acm?
[14124.931020] cdc_acm 3-6:1.10: no reset_resume for driver cdc_acm?
[14124.931245] usb0: unregister 'cdc_ether' usb-0000:00:1d.7-6, CDC Ethernet Device
[14124.992374] sd 0:0:0:0: [sda] Starting disk
[14125.011119] cdc_acm 3-6:1.1: ttyACM0: USB ACM device
[14125.011832] cdc_acm 3-6:1.3: ttyACM1: USB ACM device
[14125.014217] usb0: register 'cdc_ether' at usb-0000:00:1d.7-6, CDC Ethernet Device, 02:80:37:ec:02:00
[14125.014306] cdc_acm 3-6:1.9: ttyACM2: USB ACM device
[14125.049152] PM: Image restored successfully.
[14125.049154] Restarting tasks ... done.
[14125.075819] PM: Basic memory bitmaps freed
[14125.419854] [drm] TV-25: set mode NTSC 480i 0
[14126.279888] [drm] TV-25: set mode 2e
[14128.064432] Registered led device: iwl-phy0::radio
[14128.064456] Registered led device: iwl-phy0::assoc
[14128.064475] Registered led device: iwl-phy0::RX
[14128.064492] Registered led device: iwl-phy0::TX
[14128.076531] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[14128.077684] tg3 0000:09:00.0: PME# disabled
[14128.077786] tg3 0000:09:00.0: irq 30 for MSI/MSI-X
[14128.727013] ADDRCONF(NETDEV_UP): eth0: link is not ready
[14149.541705] wlan0: deauthenticating from 00:1d:0f:e2:85:8e by local choice (reason=3)
[14182.441673] wlan0: deauthenticating from 00:1d:0f:e2:85:8e by local choice (reason=3)
[14197.453164] wlan0: deauthenticating from 00:1d:0f:e2:85:8e by local choice (reason=3)
[14276.331349] wlan0: deauthenticating from 00:1d:0f:e2:85:8e by local choice (reason=3)
[14291.347351] wlan0: deauthenticating from 00:1d:0f:e2:85:8e by local choice (reason=3)
[14315.556228] wlan0: deauthenticating from 00:1d:0f:e2:85:8e by local choice (reason=3)
[14322.442053] Registered led device: iwl-phy0::radio
[14322.442100] Registered led device: iwl-phy0::assoc
[14322.442142] Registered led device: iwl-phy0::RX
[14322.442184] Registered led device: iwl-phy0::TX
[14322.457512] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[14455.632403] wlan0: deauthenticating from 00:1d:0f:e2:85:8e by local choice (reason=3)
[14499.112791] wlan0: deauthenticating from 00:1d:0f:e2:85:8e by local choice (reason=3)
[14514.129378] wlan0: deauthenticating from 00:1d:0f:e2:85:8e by local choice (reason=3)
[14561.932646] wlan0: deauthenticating from 00:1d:0f:e2:85:8e by local choice (reason=3)
[14563.172758] tg3 0000:09:00.0: PME# enabled
[14565.489691] Registered led device: iwl-phy0::radio
[14565.489711] Registered led device: iwl-phy0::assoc
[14565.489735] Registered led device: iwl-phy0::RX
[14565.489759] Registered led device: iwl-phy0::TX
[14565.500785] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[14565.502370] tg3 0000:09:00.0: PME# disabled
[14565.516477] tg3 0000:09:00.0: irq 30 for MSI/MSI-X
[14566.165000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[14586.197456] wlan0: deauthenticating from 00:1d:0f:e2:85:8e by local choice (reason=3)
[14876.676124] wlan0: deauthenticating from 00:1d:0f:e2:85:8e by local choice (reason=3)
[14876.766644] iwlagn 0000:0c:00.0: PCI INT A disabled
[14882.857690] cfg80211: Using static regulatory domain info
[14882.857694] cfg80211: Regulatory domain: US
[14882.857696] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[14882.857699] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[14882.857702] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[14882.857705] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[14882.857707] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[14882.857710] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[14882.857713] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[14882.857720] cfg80211: Calling CRDA for country: US
[14883.031417] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
[14883.031425] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[14883.031592] iwlagn 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[14883.031660] iwlagn 0000:0c:00.0: setting latency timer to 64
[14883.031839] iwlagn 0000:0c:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
[14883.079657] iwlagn 0000:0c:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[14883.079765] iwlagn 0000:0c:00.0: irq 29 for MSI/MSI-X
[14883.080584] phy0: Selected rate control algorithm 'iwl-agn-rs'
[14883.111787] iwlagn 0000:0c:00.0: firmware: requesting iwlwifi-5000-2.ucode
[14883.154982] iwlagn 0000:0c:00.0: loaded firmware version 8.24.2.12
[14883.306372] Registered led device: iwl-phy0::radio
[14883.306871] Registered led device: iwl-phy0::assoc
[14883.306993] Registered led device: iwl-phy0::RX
[14883.307403] Registered led device: iwl-phy0::TX
[14883.337141] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[14891.867234] wlan0: direct probe to AP 00:1d:0f:e2:85:8e (try 1)
[14891.869946] wlan0: direct probe responded
[14891.869954] wlan0: authenticate with AP 00:1d:0f:e2:85:8e (try 1)
[14891.871836] wlan0: authenticated
[14891.871873] wlan0: associate with AP 00:1d:0f:e2:85:8e (try 1)
[14891.874237] wlan0: RX AssocResp from 00:1d:0f:e2:85:8e (capab=0x431 status=0 aid=2)
[14891.874245] wlan0: associated
[14891.877104] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[14891.877218] cfg80211: Calling CRDA for country: SA
[14902.312141] wlan0: no IPv6 routers present
** Model information
not available
** Loaded modules:
Module Size Used by
iwlagn 62587 0
iwlcore 68058 1 iwlagn
mac80211 122750 2 iwlagn,iwlcore
cfg80211 87585 3 iwlagn,iwlcore,mac80211
nls_utf8 908 0
nls_cp437 4489 0
vfat 6538 0
fat 34908 1 vfat
usb_storage 29837 0
ppdev 4058 0
lp 5570 0
parport 22554 2 ppdev,lp
sco 5837 2
bridge 32983 0
stp 996 1 bridge
bnep 7444 2
rfcomm 25131 0
l2cap 21677 6 bnep,rfcomm
crc16 1027 1 l2cap
bluetooth 36327 6 sco,bnep,rfcomm,l2cap
acpi_cpufreq 4943 0
cpufreq_conservative 4018 0
cpufreq_stats 1940 0
cpufreq_powersave 602 0
cpufreq_userspace 1476 0
binfmt_misc 4907 1
uinput 4796 1
fuse 43750 1
firewire_sbp2 9752 0
loop 9753 0
reiserfs 176200 1
snd_hda_codec_intelhdmi 9027 1
snd_hda_codec_idt 35245 1
snd_hda_intel 16511 1
snd_hda_codec 46002 3 snd_hda_codec_intelhdmi,snd_hda_codec_idt,snd_hda_intel
arc4 974 2
snd_hwdep 4054 1 snd_hda_codec
snd_pcm_oss 28671 0
snd_mixer_oss 10461 1 snd_pcm_oss
zaurus 1880 0
ecb 1405 2
snd_pcm 47518 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
pcmcia 17534 0
cdc_ether 2633 1 zaurus
usbnet 9523 2 zaurus,cdc_ether
cdc_wdm 6488 0
cdc_acm 11535 0
snd_seq_midi 3576 0
mii 2714 1 usbnet
snd_rawmidi 12505 1 snd_seq_midi
snd_seq_midi_event 3684 1 snd_seq_midi
snd_seq 35459 3 snd_seq_midi,snd_seq_midi_event
yenta_socket 16511 1
snd_timer 12258 2 snd_pcm,snd_seq
rsrc_nonstatic 7413 1 yenta_socket
snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq
pcmcia_core 20478 3 pcmcia,yenta_socket,rsrc_nonstatic
snd 34363 15 snd_hda_codec_intelhdmi,snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
psmouse 44413 0
pcspkr 1207 0
dell_laptop 1533 0
evdev 5609 23
i2c_i801 6446 0
serio_raw 2916 0
wmi 3575 0
dcdbas 3940 1 dell_laptop
rfkill 10260 5 cfg80211,bluetooth,dell_laptop
soundcore 3450 1 snd
battery 3782 0
ac 1640 0
processor 26579 3 acpi_cpufreq
snd_page_alloc 5109 2 snd_hda_intel,snd_pcm
ext3 94180 1
jbd 32161 1 ext3
mbcache 3762 1 ext3
sg 15964 0
sr_mod 10770 0
sd_mod 25781 4
crc_t10dif 1012 1 sd_mod
cdrom 26487 1 sr_mod
ahci 26982 4
libata 114716 1 ahci
i915 219178 2
drm_kms_helper 17247 1 i915
drm 108299 3 i915,drm_kms_helper
i2c_algo_bit 3497 1 i915
uhci_hcd 16129 0
sdhci_pci 4541 0
sdhci 12315 1 sdhci_pci
firewire_ohci 16793 0
i2c_core 12648 4 i2c_i801,i915,drm,i2c_algo_bit
intel_agp 20497 1
agpgart 19576 2 drm,intel_agp
button 3598 1 i915
ehci_hcd 27974 0
scsi_mod 101301 6 usb_storage,firewire_sbp2,sg,sr_mod,sd_mod,libata
tg3 88525 0
libphy 11270 1 tg3
mmc_core 38503 1 sdhci
led_class 1757 2 iwlcore,sdhci
firewire_core 31183 2 firewire_sbp2,firewire_ohci
video 14605 1 i915
crc_itu_t 1035 1 firewire_core
output 1204 1 video
usbcore 98470 9 usb_storage,zaurus,cdc_ether,usbnet,cdc_wdm,cdc_acm,uhci_hcd,ehci_hcd
nls_base 4541 5 nls_utf8,nls_cp437,vfat,fat,usbcore
thermal 9206 0
fan 2586 0
thermal_sys 9378 4 processor,video,thermal,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
Subsystem: Dell Device [1028:0262]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:0262]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 27
Region 0: Memory at f6c00000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at efe8 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07)
Subsystem: Dell Device [1028:0262]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f6b00000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0262]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 6f60 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0262]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 6f80 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0262]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 6fa0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0262]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 0: Memory at fed1c400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 02)
Subsystem: Dell Device [1028:0262]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at f6afc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 84000000-841fffff
Prefetchable memory behind bridge: 0000000084200000-00000000843fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f6900000-f69fffff
Prefetchable memory behind bridge: 0000000084400000-00000000845fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: f6800000-f68fffff
Prefetchable memory behind bridge: 0000000084600000-00000000847fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0262]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 6f00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0262]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 6f20 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0262]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 6f40 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0262]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fed1c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 92) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=06, sec-latency=32
I/O behind bridge: 00005000-00005fff
Memory behind bridge: f6700000-f67fffff
Prefetchable memory behind bridge: 0000000080000000-0000000083ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller [8086:2919] (rev 02)
Subsystem: Dell Device [1028:0262]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation ICH9M/M-E SATA AHCI Controller [8086:2929] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Device [1028:0262]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 28
Region 0: I/O ports at 6e70 [size=8]
Region 1: I/O ports at 6e78 [size=4]
Region 2: I/O ports at 6e80 [size=8]
Region 3: I/O ports at 6e88 [size=4]
Region 4: I/O ports at 6ea0 [size=32]
Region 5: Memory at fed1c800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02)
Subsystem: Dell Device [1028:0262]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 0: Memory at f6afbf00 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1100 [size=32]
Kernel driver in use: i801_smbus
02:01.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev ba)
Subsystem: Dell Device [1028:0262]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f6700000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 80000000-83fff000 (prefetchable)
Memory window 1: 88000000-8bfff000
I/O window 0: 00005000-000050ff
I/O window 1: 00005400-000054ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
02:01.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 04) (prog-if 10 [OHCI])
Subsystem: Dell Device [1028:0262]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f67ff800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
02:01.2 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 21) (prog-if 01)
Subsystem: Dell Device [1028:0262]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f67ff700 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
09:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5761e Gigabit Ethernet PCIe [14e4:1680] (rev 10)
Subsystem: Dell Device [1028:0262]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 30
Region 0: Memory at f68e0000 (64-bit, non-prefetchable) [size=64K]
Region 2: Memory at f68f0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3
0c:00.0 Network controller [0280]: Intel Corporation Wireless WiFi Link 5100 [8086:4232]
Subsystem: Intel Corporation PRO/Wireless 5100AGN Network Connection [8086:1321]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 29
Region 0: Memory at f69fe000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlagn
** USB devices:
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 413c:8147 Dell Computer Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-3-686-bigmem (SMP w/2 CPU cores)
Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-3-686-bigmem depends on:
ii debconf [debconf-2.0] 1.5.30 Debian configuration management sy
ii initramfs-tools [linux-initr 0.93.4 tools for generating an initramfs
ii module-init-tools 3.12~pre2-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-3-686-bigmem recommends:
pn firmware-linux-free <none> (no description available)
ii libc6-i686 2.10.2-6 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.32-3-686-bigmem suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-3-686-bigmem is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
ii firmware-iwlwifi 0.23 Binary firmware for Intel Wireless
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
-- debconf information:
linux-image-2.6.32-3-686-bigmem/prerm/removing-running-kernel-2.6.32-3-686-bigmem: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-3-686-bigmem/prerm/would-invalidate-boot-loader-2.6.32-3-686-bigmem: true
linux-image-2.6.32-3-686-bigmem/postinst/bootloader-test-error-2.6.32-3-686-bigmem:
* linux-image-2.6.32-3-686-bigmem/postinst/missing-firmware-2.6.32-3-686-bigmem:
linux-image-2.6.32-3-686-bigmem/postinst/bootloader-error-2.6.32-3-686-bigmem:
linux-image-2.6.32-3-686-bigmem/postinst/depmod-error-initrd-2.6.32-3-686-bigmem: false
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-3-686-bigmem (Debian 2.6.32-9) (maks@debian.org) (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Thu Feb 25 06:54:30 UTC 2010
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007d38d400 (usable)
[ 0.000000] BIOS-e820: 000000007d38d400 - 000000007d38f400 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007d38f400 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe80000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x7d38d max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 800000000 write-back
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 07DC00000 mask FFFC00000 uncachable
[ 0.000000] 3 base 07E000000 mask FFE000000 uncachable
[ 0.000000] 4 base 07DB00000 mask FFFF00000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 000000007db00000 - 0000000080000000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] initial memory mapped : 0 - 01a00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037600000 page 2M
[ 0.000000] 0037600000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-e000
[ 0.000000] RAMDISK: 37878000 - 37feffa8
[ 0.000000] Allocated new RAMDISK: 00100000 - 00877fa8
[ 0.000000] Move RAMDISK from 0000000037878000 - 0000000037feffa7 to 00100000 - 00877fa7
[ 0.000000] ACPI: RSDP 000fbce0 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 7d391e00 00064 (v01 DELL M09 27D90B05 ASL 00000061)
[ 0.000000] ACPI: FACP 7d391c9c 000F4 (v04 DELL M09 27D90B05 ASL 00000061)
[ 0.000000] ACPI: DSDT 7d392400 06BB5 (v02 INT430 SYSFexxx 00001001 INTL 20050624)
[ 0.000000] ACPI: FACS 7d3a0c00 00040
[ 0.000000] ACPI: HPET 7d391f00 00038 (v01 DELL M09 00000001 ASL 00000061)
[ 0.000000] ACPI: ____ 7d3a0400 00030 (v01 DELL M09 27D90B05 ASL 00000061)
[ 0.000000] ACPI: APIC 7d392000 00068 (v01 DELL M09 27D90B05 ASL 00000047)
[ 0.000000] ACPI: ASF! 7d391c00 00076 (v32 DELL M09 27D90B05 ASL 00000061)
[ 0.000000] ACPI: MCFG 7d391fc0 0003E (v16 DELL M09 27D90B05 ASL 00000061)
[ 0.000000] ACPI: TCPA 7d392300 00032 (v01 00000000 ASL 00000000)
[ 0.000000] ACPI: SSDT 7d3902e7 0066C (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1115MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 0000b000 - 00011f00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014dfb34] TEXT DATA BSS ==> [0001000000 - 00014dfb34]
[ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #5 [00014e0000 - 00014ed184] BRK ==> [00014e0000 - 00014ed184]
[ 0.000000] #6 [0000007000 - 000000b000] PGTABLE ==> [0000007000 - 000000b000]
[ 0.000000] #7 [0000100000 - 0000877fa8] NEW RAMDISK ==> [0000100000 - 0000877fa8]
[ 0.000000] #8 [000000b000 - 0000012000] BOOTMAP ==> [000000b000 - 0000012000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007d38d
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007d38d
[ 0.000000] On node 0 totalpages: 512812
[ 0.000000] free_area_init_node: node 0, pgdat c13b87a0, node_mem_map c14ef000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3967 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2232 pages used for memmap
[ 0.000000] HighMem zone: 283351 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:78000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 15 pages/cpu @c2600000 s37432 r0 d24008 u1048576
[ 0.000000] pcpu-alloc: s37432 r0 d24008 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 508804
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz root=/dev/sda1 resume=/dev/sda2
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007d38d)
[ 0.000000] Memory: 2020500k/2051636k available (2496k kernel code, 29728k reserved, 1351k data, 380k init, 1142332k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffa00000 (2048 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc13c3000 - 0xc1422000 ( 380 kB)
[ 0.000000] .data : 0xc1270249 - 0xc13c2068 (1351 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1270249 (2496 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1995.158 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.31 BogoMIPS (lpj=7980632)
[ 0.004135] Security Framework initialized
[ 0.004197] SELinux: Disabled at boot.
[ 0.004258] Mount-cache hash table entries: 512
[ 0.004430] Initializing cgroup subsys ns
[ 0.004489] Initializing cgroup subsys cpuacct
[ 0.004549] Initializing cgroup subsys devices
[ 0.004608] Initializing cgroup subsys freezer
[ 0.004666] Initializing cgroup subsys net_cls
[ 0.004741] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004840] CPU: L2 cache: 2048K
[ 0.004898] CPU: Physical Processor ID: 0
[ 0.004956] CPU: Processor Core ID: 0
[ 0.005016] mce: CPU supports 6 MCE banks
[ 0.005080] CPU0: Thermal monitoring enabled (TM2)
[ 0.005141] using mwait in idle threads.
[ 0.005204] Performance Events: Core2 events, Intel PMU driver.
[ 0.005345] ... version: 2
[ 0.005402] ... bit width: 40
[ 0.005458] ... generic registers: 2
[ 0.005515] ... value mask: 000000ffffffffff
[ 0.005574] ... max period: 000000007fffffff
[ 0.005632] ... fixed-purpose events: 3
[ 0.005688] ... event mask: 0000000700000003
[ 0.005751] Checking 'hlt' instruction... OK.
[ 0.021172] ACPI: Core revision 20090903
[ 0.032404] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.074567] CPU0: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d
[ 0.076001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 2048K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring enabled (TM2)
[ 0.160103] CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d
[ 0.160610] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.164044] Brought up 2 CPUs
[ 0.164106] Total of 2 processors activated (7980.29 BogoMIPS).
[ 0.164572] CPU0 attaching sched-domain:
[ 0.164576] domain 0: span 0-1 level MC
[ 0.164578] groups: 0 1
[ 0.164584] CPU1 attaching sched-domain:
[ 0.164586] domain 0: span 0-1 level MC
[ 0.164588] groups: 1 0
[ 0.164724] devtmpfs: initialized
[ 0.165148] regulator: core version 0.5
[ 0.165256] NET: Registered protocol family 16
[ 0.165393] ACPI: bus type pci registered
[ 0.165521] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[ 0.165588] PCI: MCFG area at f8000000 reserved in E820
[ 0.165649] PCI: Using MMCONFIG for extended config space
[ 0.165712] PCI: Using configuration type 1 for base access
[ 0.166133] bio: create slab <bio-0> at 0
[ 0.166996] ACPI: EC: Look up EC in DSDT
[ 0.167226] ACPI: BIOS _OSI(Linux) query ignored
[ 0.201844] ACPI: SSDT 7d3a0c80 00043 (v01 LMPWR DELLLOM 00001001 INTL 20050624)
[ 0.232192] ACPI: Interpreter enabled
[ 0.232258] ACPI: (supports S0 S3 S4 S5)
[ 0.232505] ACPI: Using IOAPIC for interrupt routing
[ 0.329483] ACPI: EC: GPE = 0x11, I/O: command/status = 0x934, data = 0x930
[ 0.336120] ACPI: No dock devices found.
[ 0.355193] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.355308] DMAR: Forcing write-buffer flush capability
[ 0.355405] pci 0000:00:02.0: reg 10 64bit mmio: [0xf6c00000-0xf6ffffff]
[ 0.355413] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xe0000000-0xefffffff]
[ 0.355418] pci 0000:00:02.0: reg 20 io port: [0xefe8-0xefef]
[ 0.355460] pci 0000:00:02.1: reg 10 64bit mmio: [0xf6b00000-0xf6bfffff]
[ 0.355590] pci 0000:00:1a.0: reg 20 io port: [0x6f60-0x6f7f]
[ 0.355689] pci 0000:00:1a.1: reg 20 io port: [0x6f80-0x6f9f]
[ 0.355787] pci 0000:00:1a.2: reg 20 io port: [0x6fa0-0x6fbf]
[ 0.355886] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff]
[ 0.355958] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.356007] pci 0000:00:1a.7: PME# disabled
[ 0.356126] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf6afc000-0xf6afffff]
[ 0.356189] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.356256] pci 0000:00:1b.0: PME# disabled
[ 0.356411] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.356478] pci 0000:00:1c.0: PME# disabled
[ 0.356637] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.356703] pci 0000:00:1c.1: PME# disabled
[ 0.356866] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.356932] pci 0000:00:1c.4: PME# disabled
[ 0.357072] pci 0000:00:1d.0: reg 20 io port: [0x6f00-0x6f1f]
[ 0.357172] pci 0000:00:1d.1: reg 20 io port: [0x6f20-0x6f3f]
[ 0.357270] pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f]
[ 0.357370] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff]
[ 0.357442] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.357510] pci 0000:00:1d.7: PME# disabled
[ 0.357838] pci 0000:00:1f.2: reg 10 io port: [0x6e70-0x6e77]
[ 0.357847] pci 0000:00:1f.2: reg 14 io port: [0x6e78-0x6e7b]
[ 0.357855] pci 0000:00:1f.2: reg 18 io port: [0x6e80-0x6e87]
[ 0.357864] pci 0000:00:1f.2: reg 1c io port: [0x6e88-0x6e8b]
[ 0.357872] pci 0000:00:1f.2: reg 20 io port: [0x6ea0-0x6ebf]
[ 0.357880] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfed1c800-0xfed1cfff]
[ 0.357931] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.357995] pci 0000:00:1f.2: PME# disabled
[ 0.358096] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf6afbf00-0xf6afbfff]
[ 0.358117] pci 0000:00:1f.3: reg 20 io port: [0x1100-0x111f]
[ 0.358339] pci 0000:0c:00.0: reg 10 64bit mmio: [0xf69fe000-0xf69fffff]
[ 0.358484] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
[ 0.358575] pci 0000:0c:00.0: PME# disabled
[ 0.364169] pci 0000:00:1c.1: bridge 32bit mmio: [0xf6900000-0xf69fffff]
[ 0.364419] pci 0000:09:00.0: reg 10 64bit mmio: [0xf68e0000-0xf68effff]
[ 0.364440] pci 0000:09:00.0: reg 18 64bit mmio: [0xf68f0000-0xf68fffff]
[ 0.364534] pci 0000:09:00.0: PME# supported from D3hot D3cold
[ 0.364602] pci 0000:09:00.0: PME# disabled
[ 0.372301] pci 0000:00:1c.4: bridge 32bit mmio: [0xf6800000-0xf68fffff]
[ 0.372355] pci 0000:02:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.372381] pci 0000:02:01.0: supports D1 D2
[ 0.372384] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.372451] pci 0000:02:01.0: PME# disabled
[ 0.372555] pci 0000:02:01.1: reg 10 32bit mmio: [0xf67ff800-0xf67fffff]
[ 0.372618] pci 0000:02:01.1: supports D1 D2
[ 0.372620] pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.372687] pci 0000:02:01.1: PME# disabled
[ 0.372790] pci 0000:02:01.2: reg 10 32bit mmio: [0xf67ff700-0xf67ff7ff]
[ 0.372853] pci 0000:02:01.2: supports D1 D2
[ 0.372855] pci 0000:02:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.372923] pci 0000:02:01.2: PME# disabled
[ 0.373063] pci 0000:00:1e.0: transparent bridge
[ 0.373131] pci 0000:00:1e.0: bridge 32bit mmio: [0xf6700000-0xf67fffff]
[ 0.373184] pci_bus 0000:00: on NUMA node 0
[ 0.373193] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.373457] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 0.373599] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.373674] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.373754] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.387311] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
[ 0.387662] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *4
[ 0.388061] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *3
[ 0.388451] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
[ 0.388886] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.389577] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.390267] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.390944] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.391707] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.391797] vgaarb: loaded
[ 0.391908] PCI: Using ACPI for IRQ routing
[ 0.392350] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.392627] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.396009] Switching to clocksource tsc
[ 0.397280] pnp: PnP ACPI init
[ 0.397346] ACPI: bus type pnp registered
[ 0.462314] pnp: PnP ACPI: found 13 devices
[ 0.462376] ACPI: ACPI bus type pnp unregistered
[ 0.462438] PnPBIOS: Disabled by ACPI PNP
[ 0.462510] system 00:05: ioport range 0xc80-0xcaf has been reserved
[ 0.462575] system 00:05: ioport range 0xcc0-0xcff could not be reserved
[ 0.462645] system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.462714] system 00:09: ioport range 0xcb0-0xcbb has been reserved
[ 0.462779] system 00:09: iomem range 0xfed40000-0xfed44fff has been reserved
[ 0.462848] system 00:0a: ioport range 0x900-0x92f has been reserved
[ 0.462913] system 00:0a: ioport range 0x931-0x933 has been reserved
[ 0.462978] system 00:0a: ioport range 0x935-0x97f has been reserved
[ 0.463043] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[ 0.463108] system 00:0a: ioport range 0x1000-0x1005 has been reserved
[ 0.463179] system 00:0a: ioport range 0x1008-0x100f has been reserved
[ 0.463247] system 00:0b: ioport range 0xf400-0xf4fe has been reserved
[ 0.463312] system 00:0b: ioport range 0x1006-0x1007 has been reserved
[ 0.463378] system 00:0b: ioport range 0x100a-0x1059 could not be reserved
[ 0.463444] system 00:0b: ioport range 0x1060-0x107f has been reserved
[ 0.463508] system 00:0b: ioport range 0x1080-0x10bf has been reserved
[ 0.463574] system 00:0b: ioport range 0x1100-0x111f has been reserved
[ 0.463639] system 00:0b: ioport range 0x1010-0x102f has been reserved
[ 0.463704] system 00:0b: ioport range 0x809-0x809 has been reserved
[ 0.463772] system 00:0c: iomem range 0x0-0x9efff could not be reserved
[ 0.463837] system 00:0c: iomem range 0x9f000-0x9ffff could not be reserved
[ 0.463904] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
[ 0.463969] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 0.464035] system 00:0c: iomem range 0x100000-0x7d38d3ff could not be reserved
[ 0.464113] system 00:0c: iomem range 0x7d38d400-0x7dafffff could not be reserved
[ 0.464190] system 00:0c: iomem range 0x7db00000-0x7dbfffff has been reserved
[ 0.464256] system 00:0c: iomem range 0xffe80000-0xffffffff has been reserved
[ 0.464322] system 00:0c: iomem range 0xffa80000-0xffbfffff has been reserved
[ 0.464388] system 00:0c: iomem range 0xfec00000-0xfec0ffff could not be reserved
[ 0.464466] system 00:0c: iomem range 0xfee00000-0xfee0ffff has been reserved
[ 0.464533] system 00:0c: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.464600] system 00:0c: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.464666] system 00:0c: iomem range 0xfeda0000-0xfeda3fff has been reserved
[ 0.464733] system 00:0c: iomem range 0xfeda4000-0xfeda4fff has been reserved
[ 0.464798] system 00:0c: iomem range 0xfeda5000-0xfeda5fff has been reserved
[ 0.464865] system 00:0c: iomem range 0xfeda6000-0xfeda6fff has been reserved
[ 0.464932] system 00:0c: iomem range 0xfed1c800-0xfed1cfff has been reserved
[ 0.464998] system 00:0c: iomem range 0xfed18000-0xfed1bfff has been reserved
[ 0.465064] system 00:0c: iomem range 0xf8000000-0xfbffffff has been reserved
[ 0.499871] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
[ 0.499937] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
[ 0.500005] pci 0000:00:1c.0: MEM window: 0x84000000-0x841fffff
[ 0.500072] pci 0000:00:1c.0: PREFETCH window: 0x00000084200000-0x000000843fffff
[ 0.500155] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c
[ 0.500219] pci 0000:00:1c.1: IO window: 0x3000-0x3fff
[ 0.500287] pci 0000:00:1c.1: MEM window: 0xf6900000-0xf69fffff
[ 0.500354] pci 0000:00:1c.1: PREFETCH window: 0x00000084400000-0x000000845fffff
[ 0.500436] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:09
[ 0.500501] pci 0000:00:1c.4: IO window: 0x4000-0x4fff
[ 0.500568] pci 0000:00:1c.4: MEM window: 0xf6800000-0xf68fffff
[ 0.500635] pci 0000:00:1c.4: PREFETCH window: 0x00000084600000-0x000000847fffff
[ 0.500724] pci 0000:02:01.0: CardBus bridge, secondary bus 0000:03
[ 0.500788] pci 0000:02:01.0: IO window: 0x005000-0x0050ff
[ 0.500853] pci 0000:02:01.0: IO window: 0x005400-0x0054ff
[ 0.500920] pci 0000:02:01.0: PREFETCH window: 0x80000000-0x83ffffff
[ 0.500988] pci 0000:02:01.0: MEM window: 0x88000000-0x8bffffff
[ 0.501054] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.501119] pci 0000:00:1e.0: IO window: 0x5000-0x5fff
[ 0.501187] pci 0000:00:1e.0: MEM window: 0xf6700000-0xf67fffff
[ 0.501253] pci 0000:00:1e.0: PREFETCH window: 0x80000000-0x83ffffff
[ 0.501335] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.501404] pci 0000:00:1c.0: setting latency timer to 64
[ 0.501415] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.501482] pci 0000:00:1c.1: setting latency timer to 64
[ 0.501493] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.501560] pci 0000:00:1c.4: setting latency timer to 64
[ 0.501569] pci 0000:00:1e.0: setting latency timer to 64
[ 0.501581] pci 0000:02:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.501650] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.501653] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.501656] pci_bus 0000:0b: resource 0 io: [0x2000-0x2fff]
[ 0.501659] pci_bus 0000:0b: resource 1 mem: [0x84000000-0x841fffff]
[ 0.501661] pci_bus 0000:0b: resource 2 pref mem [0x84200000-0x843fffff]
[ 0.501664] pci_bus 0000:0c: resource 0 io: [0x3000-0x3fff]
[ 0.501666] pci_bus 0000:0c: resource 1 mem: [0xf6900000-0xf69fffff]
[ 0.501669] pci_bus 0000:0c: resource 2 pref mem [0x84400000-0x845fffff]
[ 0.501672] pci_bus 0000:09: resource 0 io: [0x4000-0x4fff]
[ 0.501674] pci_bus 0000:09: resource 1 mem: [0xf6800000-0xf68fffff]
[ 0.501677] pci_bus 0000:09: resource 2 pref mem [0x84600000-0x847fffff]
[ 0.501679] pci_bus 0000:02: resource 0 io: [0x5000-0x5fff]
[ 0.501682] pci_bus 0000:02: resource 1 mem: [0xf6700000-0xf67fffff]
[ 0.501685] pci_bus 0000:02: resource 2 pref mem [0x80000000-0x83ffffff]
[ 0.501687] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.501690] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.501692] pci_bus 0000:03: resource 0 io: [0x5000-0x50ff]
[ 0.501695] pci_bus 0000:03: resource 1 io: [0x5400-0x54ff]
[ 0.501697] pci_bus 0000:03: resource 2 pref mem [0x80000000-0x83ffffff]
[ 0.501700] pci_bus 0000:03: resource 3 mem: [0x88000000-0x8bffffff]
[ 0.501726] NET: Registered protocol family 2
[ 0.501857] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.502189] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.502667] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.502933] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.502998] TCP reno registered
[ 0.503120] NET: Registered protocol family 1
[ 0.503214] pci 0000:00:02.0: Boot video device
[ 0.503423] Unpacking initramfs...
[ 0.722335] Freeing initrd memory: 7647k freed
[ 0.727103] audit: initializing netlink socket (disabled)
[ 0.727203] type=2000 audit(1270511956.727:1): initialized
[ 0.727519] highmem bounce pool size: 64 pages
[ 0.727583] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.728975] VFS: Disk quotas dquot_6.5.2
[ 0.729087] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.729219] msgmni has been set to 1732
[ 0.729454] alg: No test for stdrng (krng)
[ 0.729560] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.729638] io scheduler noop registered
[ 0.729698] io scheduler anticipatory registered
[ 0.729759] io scheduler deadline registered
[ 0.729850] io scheduler cfq registered (default)
[ 0.730063] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.730076] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.730238] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.730249] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.730407] pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X
[ 0.730418] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.730587] isapnp: Scanning for PnP cards...
[ 1.084623] isapnp: No Plug & Play device found
[ 1.085939] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.086398] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.087063] i8042.c: Warning: Keylock active.
[ 1.090278] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.090345] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.090492] mice: PS/2 mouse device common for all mice
[ 1.090604] rtc_cmos 00:03: RTC can wake from S4
[ 1.090694] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.090788] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.090868] cpuidle: using governor ladder
[ 1.090928] cpuidle: using governor menu
[ 1.090998] No iBFT detected.
[ 1.091392] TCP cubic registered
[ 1.091582] NET: Registered protocol family 10
[ 1.092062] lo: Disabled Privacy Extensions
[ 1.092412] Mobile IPv6
[ 1.092471] NET: Registered protocol family 17
[ 1.092543] Using IPI No-Shortcut mode
[ 1.092663] PM: Checking image partition /dev/sda2
[ 1.093705] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.098548] PM: Resume from disk failed.
[ 1.098554] registered taskstats version 1
[ 1.099329] rtc_cmos 00:03: setting system clock to 2010-04-05 23:59:17 UTC (1270511957)
[ 1.099459] Freeing unused kernel memory: 380k freed
[ 1.099696] Write protecting the kernel text: 2500k
[ 1.099787] Write protecting the kernel read-only data: 908k
[ 1.218224] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.218305] ACPI: Thermal Zone [THM] (48 C)
[ 1.368056] tg3.c:v3.102 (September 1, 2009)
[ 1.368292] tg3 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.369101] tg3 0000:09:00.0: setting latency timer to 64
[ 1.370361] usbcore: registered new interface driver usbfs
[ 1.370450] usbcore: registered new interface driver hub
[ 1.370631] usbcore: registered new device driver usb
[ 1.373122] SCSI subsystem initialized
[ 1.373452] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.374592] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 1.374858] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 1.374939] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.374943] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.375044] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.375147] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.378938] Linux agpgart interface v0.103
[ 1.379091] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.379876] ACPI: Lid Switch [LID]
[ 1.380057] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 1.380141] ACPI: Power Button [PBTN]
[ 1.380251] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 1.380331] ACPI: Sleep Button [SBTN]
[ 1.382113] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
[ 1.391335] firewire_ohci 0000:02:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.393009] sdhci: Secure Digital Host Controller Interface driver
[ 1.393076] sdhci: Copyright(c) Pierre Ossman
[ 1.396676] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.405359] eth0: Tigon3 [partno(BCM95761e) rev 5761100] (PCI Express) MAC address a4:ba:db:9a:a8:2b
[ 1.405442] eth0: attached PHY is 5761 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 1.405519] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.405584] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.414802] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.414909] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.414975] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.415051] usb usb1: Product: EHCI Host Controller
[ 1.415114] usb usb1: Manufacturer: Linux 2.6.32-3-686-bigmem ehci_hcd
[ 1.415178] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.415316] usb usb1: configuration #1 chosen from 1 choice
[ 1.415408] hub 1-0:1.0: USB hub found
[ 1.415475] hub 1-0:1.0: 6 ports detected
[ 1.415619] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset
[ 1.415773] [drm] Initialized drm 1.1.0 20060810
[ 1.416414] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
[ 1.451383] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 1.451485] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.451558] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.451562] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.451635] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
[ 1.451751] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60
[ 1.451853] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.451920] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.451998] usb usb2: Product: UHCI Host Controller
[ 1.452059] libata version 3.00 loaded.
[ 1.452061] usb usb2: Manufacturer: Linux 2.6.32-3-686-bigmem uhci_hcd
[ 1.452128] usb usb2: SerialNumber: 0000:00:1a.0
[ 1.452259] usb usb2: configuration #1 chosen from 1 choice
[ 1.452351] hub 2-0:1.0: USB hub found
[ 1.452416] hub 2-0:1.0: 2 ports detected
[ 1.452604] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.452682] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.452686] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.452753] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
[ 1.452855] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.456809] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.456815] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
[ 1.469008] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.469086] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.469152] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.469229] usb usb3: Product: EHCI Host Controller
[ 1.469290] usb usb3: Manufacturer: Linux 2.6.32-3-686-bigmem ehci_hcd
[ 1.469354] usb usb3: SerialNumber: 0000:00:1d.7
[ 1.469515] usb usb3: configuration #1 chosen from 1 choice
[ 1.469636] hub 3-0:1.0: USB hub found
[ 1.469701] hub 3-0:1.0: 6 ports detected
[ 1.469826] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.469893] i915 0000:00:02.0: setting latency timer to 64
[ 1.474430] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[ 1.474512] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 1.474643] i915 0000:00:02.0: irq 27 for MSI/MSI-X
[ 1.474650] [drm] set up 31M of stolen space
[ 1.476025] firewire_ohci: Added fw-ohci device 0000:02:01.1, OHCI version 1.10
[ 1.476230] sdhci-pci 0000:02:01.2: SDHCI controller found [1180:0822] (rev 21)
[ 1.476326] sdhci-pci 0000:02:01.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.478445] Registered led device: mmc0::
[ 1.479528] mmc0: SDHCI controller on PCI [0000:02:01.2] using DMA
[ 2.050874] firewire_core: created device fw0: GUID 394fc0001d005090, S400
[ 2.053047] usb 3-6: new high speed USB device using ehci_hcd and address 2
[ 2.123093] [drm] TV-25: set mode NTSC 480i 0
[ 2.349810] [drm] TV-25: set mode 848x480 2c
[ 2.405485] usb 3-6: New USB device found, idVendor=413c, idProduct=8147
[ 2.405488] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.405490] usb 3-6: Product: Dell Wireless 5530 HSPA Mobile Broadband Minicard Device
[ 2.405492] usb 3-6: Manufacturer: Dell
[ 2.405494] usb 3-6: SerialNumber: 3558620236447540
[ 2.405555] usb 3-6: configuration #1 chosen from 2 choices
[ 2.430029] [drm] LVDS-8: set mode 1280x800 2d
[ 2.432070] Console: switching to colour frame buffer device 106x30
[ 2.435732] fb0: inteldrmfb frame buffer device
[ 2.436190] registered panic notifier
[ 2.466403] acpi device:3d: registered as cooling_device0
[ 2.467726] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input4
[ 2.468362] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
[ 2.469061] ACPI Warning for \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) (20090903/nspredef-433)
[ 2.470590] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:02/input/input5
[ 2.471461] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
[ 2.472394] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.473362] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.474353] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 2.474357] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.475342] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 2.476408] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80
[ 2.477520] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.478638] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.479801] usb usb4: Product: UHCI Host Controller
[ 2.480994] usb usb4: Manufacturer: Linux 2.6.32-3-686-bigmem uhci_hcd
[ 2.482234] usb usb4: SerialNumber: 0000:00:1a.1
[ 2.483555] usb usb4: configuration #1 chosen from 1 choice
[ 2.484855] hub 4-0:1.0: USB hub found
[ 2.486128] hub 4-0:1.0: 2 ports detected
[ 2.487408] ahci 0000:00:1f.2: version 3.0
[ 2.487422] ahci 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 2.488748] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
[ 2.488800] ahci: SSS flag set, parallel bus scan disabled
[ 2.490108] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 2.491399] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems
[ 2.492733] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.516051] scsi0 : ahci
[ 2.517701] scsi1 : ahci
[ 2.519053] scsi2 : ahci
[ 2.520384] scsi3 : ahci
[ 2.521635] scsi4 : ahci
[ 2.522890] scsi5 : ahci
[ 2.524509] ata1: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1c900 irq 28
[ 2.525676] ata2: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1c980 irq 28
[ 2.526806] ata3: DUMMY
[ 2.527881] ata4: DUMMY
[ 2.528904] ata5: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1cb00 irq 28
[ 2.529930] ata6: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1cb80 irq 28
[ 2.530952] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 2.531940] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 2.531944] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 2.532933] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 2.533934] uhci_hcd 0000:00:1a.2: irq 22, io base 0x00006fa0
[ 2.534928] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.535887] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.536871] usb usb5: Product: UHCI Host Controller
[ 2.537835] usb usb5: Manufacturer: Linux 2.6.32-3-686-bigmem uhci_hcd
[ 2.538797] usb usb5: SerialNumber: 0000:00:1a.2
[ 2.539829] usb usb5: configuration #1 chosen from 1 choice
[ 2.540805] hub 5-0:1.0: USB hub found
[ 2.541743] hub 5-0:1.0: 2 ports detected
[ 2.542714] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.543696] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.543700] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.544669] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 2.545664] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00
[ 2.546626] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.547562] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.548480] usb usb6: Product: UHCI Host Controller
[ 2.549410] usb usb6: Manufacturer: Linux 2.6.32-3-686-bigmem uhci_hcd
[ 2.550387] usb usb6: SerialNumber: 0000:00:1d.0
[ 2.551455] usb usb6: configuration #1 chosen from 1 choice
[ 2.552493] hub 6-0:1.0: USB hub found
[ 2.553536] hub 6-0:1.0: 2 ports detected
[ 2.554611] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.555674] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.555678] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.556735] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 2.557857] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20
[ 2.558937] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.560014] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.561105] usb usb7: Product: UHCI Host Controller
[ 2.562181] usb usb7: Manufacturer: Linux 2.6.32-3-686-bigmem uhci_hcd
[ 2.563269] usb usb7: SerialNumber: 0000:00:1d.1
[ 2.564429] usb usb7: configuration #1 chosen from 1 choice
[ 2.565532] hub 7-0:1.0: USB hub found
[ 2.566715] hub 7-0:1.0: 2 ports detected
[ 2.567813] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 2.568895] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.568899] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.569980] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 2.571092] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
[ 2.572198] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.573297] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.574386] usb usb8: Product: UHCI Host Controller
[ 2.575484] usb usb8: Manufacturer: Linux 2.6.32-3-686-bigmem uhci_hcd
[ 2.576598] usb usb8: SerialNumber: 0000:00:1d.2
[ 2.577764] usb usb8: configuration #1 chosen from 1 choice
[ 2.578862] hub 8-0:1.0: USB hub found
[ 2.579929] hub 8-0:1.0: 2 ports detected
[ 2.848024] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.850629] ata1.00: ATA-8: ST9250315AS, 0003DEM1, max UDMA/133
[ 2.851690] ata1.00: 488397168 sectors, multi 8: LBA48 NCQ (depth 31/32)
[ 2.854636] ata1.00: configured for UDMA/133
[ 2.868105] scsi 0:0:0:0: Direct-Access ATA ST9250315AS 0003 PQ: 0 ANSI: 5
[ 3.592021] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.594817] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GT10N, A109, max UDMA/100, ATAPI AN
[ 3.599826] ata2.00: configured for UDMA/100
[ 3.618096] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GT10N A109 PQ: 0 ANSI: 5
[ 3.936017] ata5: SATA link down (SStatus 0 SControl 300)
[ 4.272017] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.295369] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 4.296583] sd 0:0:0:0: [sda] Write Protect is off
[ 4.297729] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.297751] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.299267] sda: sda1 sda2 sda3 sda4
[ 4.319056] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.322054] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.323315] Uniform CD-ROM driver Revision: 3.20
[ 4.324781] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.329917] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.331213] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.604409] PM: Starting manual resume from disk
[ 4.605694] PM: Resume from partition 8:2
[ 4.605695] PM: Checking hibernation image.
[ 4.605912] PM: Error -22 checking image file
[ 4.605913] PM: Resume from disk failed.
[ 4.655936] kjournald starting. Commit interval 5 seconds
[ 4.657225] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.116701] udev: starting version 151
[ 6.463773] ACPI: SSDT 7d390953 002C3 (v01 PmRef BspIst 00003000 INTL 20050624)
[ 6.466743] ACPI: AC Adapter [AC] (on-line)
[ 6.466952] ACPI: SSDT 7d390ded 005C6 (v01 PmRef BspCst 00003001 INTL 20050624)
[ 6.467271] Monitor-Mwait will be used to enter C-1 state
[ 6.467293] Monitor-Mwait will be used to enter C-2 state
[ 6.467310] Monitor-Mwait will be used to enter C-3 state
[ 6.467315] Marking TSC unstable due to TSC halts in idle
[ 6.467402] processor LNXCPU:00: registered as cooling_device1
[ 6.467888] ACPI: SSDT 7d390c16 001D7 (v01 PmRef ApIst 00003000 INTL 20050624)
[ 6.468227] ACPI: SSDT 7d3913b3 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 6.468485] Switching to clocksource hpet
[ 6.477582] processor LNXCPU:01: registered as cooling_device2
[ 6.508521] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 6.564151] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 6.567512] ACPI: Battery Slot [BAT0] (battery present)
[ 6.568891] ACPI: WMI: Mapper loaded
[ 6.636631] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 6.771761] cfg80211: Using static regulatory domain info
[ 6.773062] cfg80211: Regulatory domain: US
[ 6.774317] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 6.775601] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 6.776932] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 6.778280] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 6.779582] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 6.780822] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 6.782061] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 6.783257] cfg80211: Calling CRDA for country: US
[ 7.051463] yenta_cardbus 0000:02:01.0: CardBus bridge found [1028:0262]
[ 7.181064] yenta_cardbus 0000:02:01.0: ISA IRQ mask 0x0cb8, PCI irq 19
[ 7.182251] yenta_cardbus 0000:02:01.0: Socket status: 30000006
[ 7.183408] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
[ 7.184618] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
[ 7.185818] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x5000-0x5fff: clean.
[ 7.187287] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0xf6700000 - 0xf67fffff
[ 7.189649] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x83ffffff
[ 7.215437] cdc_wdm 3-6:1.5: cdc-wdm-176: USB WDM device
[ 7.216971] cdc_acm 3-6:1.1: ttyACM0: USB ACM device
[ 7.219053] cdc_wdm 3-6:1.6: cdc-wdm-175: USB WDM device
[ 7.220427] usbcore: registered new interface driver cdc_wdm
[ 7.224143] cdc_acm 3-6:1.3: ttyACM1: USB ACM device
[ 7.226058] cdc_acm 3-6:1.9: ttyACM2: USB ACM device
[ 7.227798] usbcore: registered new interface driver cdc_acm
[ 7.229071] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 7.290862] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
[ 7.292140] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[ 7.293527] iwlagn 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 7.294825] iwlagn 0000:0c:00.0: setting latency timer to 64
[ 7.294903] iwlagn 0000:0c:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
[ 7.312015] usb0: register 'cdc_ether' at usb-0000:00:1d.7-6, CDC Ethernet Device, 02:80:37:ec:02:00
[ 7.313323] usbcore: registered new interface driver cdc_ether
[ 7.335653] iwlagn 0000:0c:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 7.337095] iwlagn 0000:0c:00.0: irq 29 for MSI/MSI-X
[ 7.348066] alps.c: Failed to enable absolute mode
[ 7.774337] usbcore: registered new interface driver zaurus
[ 7.856490] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 7.860083] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[ 7.862354] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 7.864433] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 7.866456] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 7.910613] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 7.963617] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 7.964965] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 8.398456] input: PS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input7
[ 9.148008] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x00ff000e
[ 9.149927] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 9.170406] input: HDA Intel Mic at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 9.173140] input: HDA Intel Line Out at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 9.175861] input: HDA Intel HP Out at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 9.692185] Adding 3903784k swap on /dev/sda2. Priority:-1 extents:1 across:3903784k
[ 9.818580] EXT3 FS on sda1, internal journal
[ 10.320785] REISERFS (device sda3): found reiserfs format "3.6" with standard journal
[ 10.323648] REISERFS (device sda3): using ordered data mode
[ 10.333601] REISERFS (device sda3): journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 10.336785] REISERFS (device sda3): checking transaction log (sda3)
[ 10.406520] REISERFS (device sda3): Using r5 hash to sort names
[ 11.138191] loop: module loaded
[ 11.902345] tg3 0000:09:00.0: irq 30 for MSI/MSI-X
[ 12.564645] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.101685] fuse init (API version 7.13)
[ 13.426460] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12
[ 15.290449] apm: BIOS not found.
[ 17.927474] Bluetooth: Core ver 2.15
[ 17.928590] NET: Registered protocol family 31
[ 17.929668] Bluetooth: HCI device and connection manager initialized
[ 17.930737] Bluetooth: HCI socket layer initialized
[ 17.952597] Bluetooth: L2CAP ver 2.14
[ 17.955174] Bluetooth: L2CAP socket layer initialized
[ 17.966939] Bluetooth: RFCOMM TTY layer initialized
[ 17.969567] Bluetooth: RFCOMM socket layer initialized
[ 17.972143] Bluetooth: RFCOMM ver 1.11
[ 18.281501] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.284078] Bluetooth: BNEP filters: protocol multicast
[ 18.333877] Bridge firewalling registered
[ 18.511967] Bluetooth: SCO (Voice Link) ver 0.6
[ 18.514573] Bluetooth: SCO socket layer initialized
[ 19.479338] lp: driver loaded but no devices found
[ 19.528983] ppdev: user-space parallel port driver
[ 19.597738] iwlagn 0000:0c:00.0: firmware: requesting iwlwifi-5000-2.ucode
[ 19.865093] iwlagn 0000:0c:00.0: loaded firmware version 8.24.2.12
[ 20.017921] Registered led device: iwl-phy0::radio
[ 20.020986] Registered led device: iwl-phy0::assoc
[ 20.023767] Registered led device: iwl-phy0::RX
[ 20.026522] Registered led device: iwl-phy0::TX
[ 20.040986] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 41.520304] [drm] TV-25: set mode b
[ 50.721704] wlan0: direct probe to AP 00:1d:0f:e2:85:8e (try 1)
[ 50.724528] wlan0: direct probe responded
[ 50.724536] wlan0: authenticate with AP 00:1d:0f:e2:85:8e (try 1)
[ 50.726257] wlan0: authenticated
[ 50.726296] wlan0: associate with AP 00:1d:0f:e2:85:8e (try 1)
[ 50.728747] wlan0: RX AssocResp from 00:1d:0f:e2:85:8e (capab=0x431 status=0 aid=1)
[ 50.728755] wlan0: associated
[ 50.730317] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 50.730413] cfg80211: Calling CRDA for country: SA
[ 61.696161] wlan0: no IPv6 routers present
[ 79.124587] REISERFS (device sda4): found reiserfs format "3.6" with standard journal
[ 79.124599] REISERFS (device sda4): using ordered data mode
[ 79.131166] REISERFS (device sda4): journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 79.131439] REISERFS (device sda4): checking transaction log (sda4)
[ 79.142263] REISERFS (device sda4): Using r5 hash to sort names
[ 123.912162] usb 3-1: new high speed USB device using ehci_hcd and address 3
[ 124.045703] usb 3-1: New USB device found, idVendor=4102, idProduct=1019
[ 124.045713] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 124.045720] usb 3-1: Product: iriver T30
[ 124.045725] usb 3-1: Manufacturer: iriver Limited
[ 124.045943] usb 3-1: configuration #1 chosen from 1 choice
[ 124.108474] Initializing USB Mass Storage driver...
[ 124.108734] scsi6 : SCSI emulation for USB Mass Storage devices
[ 124.109050] usbcore: registered new interface driver usb-storage
[ 124.109058] USB Mass Storage support registered.
[ 124.109260] usb-storage: device found at 3
[ 124.109265] usb-storage: waiting for device to settle before scanning
[ 129.108679] usb-storage: device scan complete
[ 129.110199] scsi 6:0:0:0: Direct-Access iriver T30 Pure 1.00 PQ: 0 ANSI: 2
[ 129.111163] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 129.113074] sd 6:0:0:0: [sdb] 2041856 512-byte logical blocks: (1.04 GB/997 MiB)
[ 129.114161] sd 6:0:0:0: [sdb] Write Protect is off
[ 129.114169] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 129.114175] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 129.121167] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 129.121180] sdb:
[ 129.130522] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 129.130526] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 129.384289] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 151.232184] usb 3-1: reset high speed USB device using ehci_hcd and address 3
[ 151.480315] usb 3-1: reset high speed USB device using ehci_hcd and address 3
[ 156.064150] usb 3-1: USB disconnect, address 3
[ 224.532124] [drm] TV-25: set mode NTSC 480i 0
[ 225.004369] [drm] TV-25: set mode NTSC 480i 0
[ 5991.682751] iwlagn 0000:0c:00.0: Microcode SW error detected. Restarting 0x2000000.
[ 5991.739001] Registered led device: iwl-phy0::radio
[ 5991.739051] Registered led device: iwl-phy0::assoc
[ 5991.739093] Registered led device: iwl-phy0::RX
[ 5991.739134] Registered led device: iwl-phy0::TX
[14080.131975] [drm] TV-25: set mode 848x480 2c
[14080.272371] [drm] LVDS-8: set mode 1280x800 2d
[14080.392989] [drm] TV-25: set mode 848x480 2c
[14083.071743] [drm] TV-25: set mode NTSC 480i 0
[14083.253033] [drm] TV-25: set mode NTSC 480i 0
[14119.124098] wlan0: deauthenticating from 00:1d:0f:e2:85:8e by local choice (reason=3)
[14119.210779] ------------[ cut here ]------------
[14119.210823] WARNING: at /build/buildd-linux-2.6_2.6.32-9-i386-0BnCTJ/linux-2.6-2.6.32/debian/build/source_i386_none/net/wireless/core.c:614 wdev_cleanup_work+0x42/0x9c [cfg80211]()
[14119.210832] Hardware name: Latitude E5400
[14119.210836] Modules linked in: nls_utf8 nls_cp437 vfat fat usb_storage ppdev lp parport sco bridge stp bnep rfcomm l2cap crc16 bluetooth acpi_cpufreq cpufreq_conservative cpufreq_stats cpufreq_powersave cpufreq_userspace binfmt_misc uinput fuse firewire_sbp2 loop reiserfs snd_hda_codec_intelhdmi snd_hda_codec_idt snd_hda_intel snd_hda_codec arc4 snd_hwdep snd_pcm_oss snd_mixer_oss zaurus ecb snd_pcm pcmcia cdc_ether iwlagn usbnet cdc_wdm cdc_acm snd_seq_midi iwlcore mii snd_rawmidi snd_seq_midi_event snd_seq yenta_socket mac80211 snd_timer rsrc_nonstatic snd_seq_device pcmcia_core cfg80211 snd psmouse pcspkr dell_laptop evdev i2c_i801 serio_raw wmi dcdbas rfkill soundcore battery ac processor snd_page_alloc ext3 jbd mbcache sg sr_mod sd_mod crc_t10dif cdrom ahci libata i915 drm_kms_helper drm i2c_algo_bit uhci_hcd sdhci_pci sdhci firewire_ohci i2c_core intel_agp agpgart button ehci_hcd scsi_mod tg3 libphy mmc_core led_class firewire_core video crc_itu_t output usbcore nls_
base thermal fan thermal_sys [last unloaded: scsi_wait_scan]
[14119.211050] Pid: 9, comm: events/0 Not tainted 2.6.32-3-686-bigmem #1
[14119.211056] Call Trace:
[14119.211071] [<c1036b4d>] ? warn_slowpath_common+0x5e/0x8a
[14119.211080] [<c1036b83>] ? warn_slowpath_null+0xa/0xc
[14119.211101] [<f9196424>] ? wdev_cleanup_work+0x42/0x9c [cfg80211]
[14119.211111] [<c1047b43>] ? worker_thread+0x141/0x1bd
[14119.211127] [<f91963e2>] ? wdev_cleanup_work+0x0/0x9c [cfg80211]
[14119.211139] [<c104a882>] ? autoremove_wake_function+0x0/0x2d
[14119.211147] [<c1047a02>] ? worker_thread+0x0/0x1bd
[14119.211155] [<c104a650>] ? kthread+0x61/0x66
[14119.211163] [<c104a5ef>] ? kthread+0x0/0x66
[14119.211173] [<c1008ba7>] ? kernel_thread_helper+0x7/0x10
[14119.211178] ---[ end trace b69bf8ce9fc0434c ]---
[14120.400772] tg3 0000:09:00.0: PME# enabled
[14120.929485] [drm] TV-25: set mode 848x480 2c
[14121.093470] [drm] TV-25: set mode 848x480 2c
[14121.233841] [drm] TV-25: set mode 848x480 2c
[14121.295601] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[14121.295606] PM: Basic memory bitmaps created
[14121.295608] PM: Syncing filesystems ... done.
[14121.364386] Freezing user space processes ... (elapsed 0.00 seconds) done.
[14121.365146] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[14121.365270] PM: Preallocating image memory... done (allocated 371805 pages)
[14121.982620] PM: Allocated 1487220 kbytes in 0.61 seconds (2438.06 MB/s)
[14121.982667] Suspending console(s) (use no_console_suspend to debug)
[14122.008237] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[14122.009940] ACPI handle has no context!
[14122.009948] sdhci-pci 0000:02:01.2: PCI INT C disabled
[14122.009955] ACPI handle has no context!
[14122.032276] ACPI handle has no context!
[14122.336288] HDA Intel 0000:00:1b.0: PCI INT A disabled
[14122.361265] ACPI: Preparing to enter system sleep state S4
[14122.372516] PM: Saving platform NVS memory
[14122.404010] Disabling non-boot CPUs ...
[14122.404027] CPU0 attaching NULL sched-domain.
[14122.404029] CPU1 attaching NULL sched-domain.
[14122.468013] CPU0 attaching NULL sched-domain.
[14122.572018] CPU 1 is now offline
[14122.572020] SMP alternatives: switching to UP code
[14122.578355] Extended CMOS year: 2000
[14122.578439] PM: Creating hibernation image:
[14122.580007] PM: Need to copy 79648 pages
[14122.580007] PM: Normal pages needed: 16938 + 1024, available pages: 210256
[14122.580007] PM: Restoring platform NVS memory
[14122.580007] CPU0: Thermal monitoring enabled (TM2)
[14122.580007] Extended CMOS year: 2000
[14122.580007] Enabling non-boot CPUs ...
[14122.580007] SMP alternatives: switching to SMP code
[14122.584446] Booting processor 1 APIC 0x1 ip 0x6000
[14122.578019] Initializing CPU#1
[14122.578019] CPU: L1 I cache: 32K, L1 D cache: 32K
[14122.578019] CPU: L2 cache: 2048K
[14122.578019] CPU: Physical Processor ID: 0
[14122.578019] CPU: Processor Core ID: 1
[14122.578019] CPU1: Thermal monitoring enabled (TM2)
[14122.672093] CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d
[14122.672168] CPU0 attaching NULL sched-domain.
[14122.700014] CPU0 attaching sched-domain:
[14122.700017] domain 0: span 0-1 level MC
[14122.700019] groups: 0 1
[14122.700023] CPU1 attaching sched-domain:
[14122.700025] domain 0: span 0-1 level MC
[14122.700027] groups: 1 0
[14122.700413] CPU1 is up
[14122.700802] ACPI: Waking up from system sleep state S4
[14122.756598] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[14122.756995] pci 0000:00:1e.0: restoring config space at offset 0x6 (was 0x20030200, writing 0x20060200)
[14122.757104] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[14122.757565] yenta_cardbus 0000:02:01.0: restoring config space at offset 0xf (was 0x700010a, writing 0x580010a)
[14122.757589] yenta_cardbus 0000:02:01.0: restoring config space at offset 0x3 (was 0x824010, writing 0x82a808)
[14122.757597] yenta_cardbus 0000:02:01.0: restoring config space at offset 0x1 (was 0x2100107, writing 0x2100007)
[14122.772051] firewire_ohci 0000:02:01.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804010)
[14122.772060] firewire_ohci 0000:02:01.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[14122.788047] sdhci-pci 0000:02:01.2: restoring config space at offset 0x3 (was 0x800000, writing 0x804010)
[14122.788055] sdhci-pci 0000:02:01.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[14122.955729] i915 0000:00:02.0: setting latency timer to 64
[14123.307122] [drm] LVDS-8: set mode 1280x800 2d
[14123.805860] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[14123.805902] usb usb2: root hub lost power or was reset
[14123.805922] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[14123.805963] usb usb4: root hub lost power or was reset
[14123.805982] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[14123.806023] usb usb5: root hub lost power or was reset
[14123.806043] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[14123.806048] usb usb1: root hub lost power or was reset
[14123.809927] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[14123.809940] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[14123.809946] HDA Intel 0000:00:1b.0: setting latency timer to 64
[14123.809970] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[14123.810012] usb usb6: root hub lost power or was reset
[14123.810032] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[14123.810073] usb usb7: root hub lost power or was reset
[14123.810092] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[14123.810132] usb usb8: root hub lost power or was reset
[14123.810152] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[14123.810156] usb usb3: root hub lost power or was reset
[14123.814047] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[14123.814057] pci 0000:00:1e.0: setting latency timer to 64
[14123.814068] ahci 0000:00:1f.2: setting latency timer to 64
[14124.032230] sdhci-pci 0000:02:01.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[14124.032264] firewire_core: skipped bus generations, destroying all nodes
[14124.140222] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[14124.143529] ata2.00: configured for UDMA/100
[14124.148222] ata6: SATA link down (SStatus 0 SControl 300)
[14124.156221] ata5: SATA link down (SStatus 0 SControl 300)
[14124.532251] firewire_core: rediscovered device fw0
[14124.536232] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[14124.583344] ata1.00: configured for UDMA/133
[14124.736223] usb 3-6: reset high speed USB device using ehci_hcd and address 2
[14124.930995] cdc_acm 3-6:1.1: no reset_resume for driver cdc_acm?
[14124.930999] cdc_acm 3-6:1.2: no reset_resume for driver cdc_acm?
[14124.931002] cdc_acm 3-6:1.3: no reset_resume for driver cdc_acm?
[14124.931005] cdc_acm 3-6:1.4: no reset_resume for driver cdc_acm?
[14124.931010] cdc_ether 3-6:1.7: no reset_resume for driver cdc_ether?
[14124.931014] cdc_ether 3-6:1.8: no reset_resume for driver cdc_ether?
[14124.931017] cdc_acm 3-6:1.9: no reset_resume for driver cdc_acm?
[14124.931020] cdc_acm 3-6:1.10: no reset_resume for driver cdc_acm?
[14124.931245] usb0: unregister 'cdc_ether' usb-0000:00:1d.7-6, CDC Ethernet Device
[14124.992374] sd 0:0:0:0: [sda] Starting disk
[14125.011119] cdc_acm 3-6:1.1: ttyACM0: USB ACM device
[14125.011832] cdc_acm 3-6:1.3: ttyACM1: USB ACM device
[14125.014217] usb0: register 'cdc_ether' at usb-0000:00:1d.7-6, CDC Ethernet Device, 02:80:37:ec:02:00
[14125.014306] cdc_acm 3-6:1.9: ttyACM2: USB ACM device
[14125.049152] PM: Image restored successfully.
[14125.049154] Restarting tasks ... done.
[14125.075819] PM: Basic memory bitmaps freed
[14125.419854] [drm] TV-25: set mode NTSC 480i 0
[14126.279888] [drm] TV-25: set mode 2e
[14128.064432] Registered led device: iwl-phy0::radio
[14128.064456] Registered led device: iwl-phy0::assoc
[14128.064475] Registered led device: iwl-phy0::RX
[14128.064492] Registered led device: iwl-phy0::TX
[14128.076531] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[14128.077684] tg3 0000:09:00.0: PME# disabled
[14128.077786] tg3 0000:09:00.0: irq 30 for MSI/MSI-X
[14128.727013] ADDRCONF(NETDEV_UP): eth0: link is not ready
[14149.541705] wlan0: deauthenticating from 00:1d:0f:e2:85:8e by local choice (reason=3)
[14182.441673] wlan0: deauthenticating from 00:1d:0f:e2:85:8e by local choice (reason=3)
[14197.453164] wlan0: deauthenticating from 00:1d:0f:e2:85:8e by local choice (reason=3)
[14276.331349] wlan0: deauthenticating from 00:1d:0f:e2:85:8e by local choice (reason=3)
[14291.347351] wlan0: deauthenticating from 00:1d:0f:e2:85:8e by local choice (reason=3)
[14315.556228] wlan0: deauthenticating from 00:1d:0f:e2:85:8e by local choice (reason=3)
[14322.442053] Registered led device: iwl-phy0::radio
[14322.442100] Registered led device: iwl-phy0::assoc
[14322.442142] Registered led device: iwl-phy0::RX
[14322.442184] Registered led device: iwl-phy0::TX
[14322.457512] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[14455.632403] wlan0: deauthenticating from 00:1d:0f:e2:85:8e by local choice (reason=3)
[14499.112791] wlan0: deauthenticating from 00:1d:0f:e2:85:8e by local choice (reason=3)
[14514.129378] wlan0: deauthenticating from 00:1d:0f:e2:85:8e by local choice (reason=3)
[14561.932646] wlan0: deauthenticating from 00:1d:0f:e2:85:8e by local choice (reason=3)
[14563.172758] tg3 0000:09:00.0: PME# enabled
[14565.489691] Registered led device: iwl-phy0::radio
[14565.489711] Registered led device: iwl-phy0::assoc
[14565.489735] Registered led device: iwl-phy0::RX
[14565.489759] Registered led device: iwl-phy0::TX
[14565.500785] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[14565.502370] tg3 0000:09:00.0: PME# disabled
[14565.516477] tg3 0000:09:00.0: irq 30 for MSI/MSI-X
[14566.165000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[14586.197456] wlan0: deauthenticating from 00:1d:0f:e2:85:8e by local choice (reason=3)
[14876.676124] wlan0: deauthenticating from 00:1d:0f:e2:85:8e by local choice (reason=3)
[14876.766644] iwlagn 0000:0c:00.0: PCI INT A disabled
[14882.857690] cfg80211: Using static regulatory domain info
[14882.857694] cfg80211: Regulatory domain: US
[14882.857696] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[14882.857699] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[14882.857702] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[14882.857705] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[14882.857707] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[14882.857710] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[14882.857713] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[14882.857720] cfg80211: Calling CRDA for country: US
[14883.031417] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
[14883.031425] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[14883.031592] iwlagn 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[14883.031660] iwlagn 0000:0c:00.0: setting latency timer to 64
[14883.031839] iwlagn 0000:0c:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
[14883.079657] iwlagn 0000:0c:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[14883.079765] iwlagn 0000:0c:00.0: irq 29 for MSI/MSI-X
[14883.080584] phy0: Selected rate control algorithm 'iwl-agn-rs'
[14883.111787] iwlagn 0000:0c:00.0: firmware: requesting iwlwifi-5000-2.ucode
[14883.154982] iwlagn 0000:0c:00.0: loaded firmware version 8.24.2.12
[14883.306372] Registered led device: iwl-phy0::radio
[14883.306871] Registered led device: iwl-phy0::assoc
[14883.306993] Registered led device: iwl-phy0::RX
[14883.307403] Registered led device: iwl-phy0::TX
[14883.337141] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[14891.867234] wlan0: direct probe to AP 00:1d:0f:e2:85:8e (try 1)
[14891.869946] wlan0: direct probe responded
[14891.869954] wlan0: authenticate with AP 00:1d:0f:e2:85:8e (try 1)
[14891.871836] wlan0: authenticated
[14891.871873] wlan0: associate with AP 00:1d:0f:e2:85:8e (try 1)
[14891.874237] wlan0: RX AssocResp from 00:1d:0f:e2:85:8e (capab=0x431 status=0 aid=2)
[14891.874245] wlan0: associated
[14891.877104] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[14891.877218] cfg80211: Calling CRDA for country: SA
[14902.312141] wlan0: no IPv6 routers present
--- End Message ---