Bug#579212: firmware-bnx2: Kernel panic or hardware shutdown on HP ProLiant ML370 G6
Package: firmware-bnx2
Version: 0.23
Severity: important
Tags: squeeze
When i bring up network interface eth1-eth3 i see messages from kernel
like this:
Message from syslogd@localhost at Apr 2 09:29:57 ... kernel:[
227.352979] Uhhuh. NMI received for unknown reason b1 on CPU 0.
Message from syslogd@localhost at Apr 2 09:29:57 ... kernel:[
227.353044] You have some hardware problem, likely on the PCI bus.
Message from syslogd@localhost at Apr 2 09:29:57 ... kernel:[
227.353106] Dazed and confused, but trying to continue
and my network card become unavaible. Sometimes I see kernel panic
message instead of this.
When I use only interface eth0 after some hours I see kernel message:
[121030.457885] eth0: Device temperature 100 degrees C exceeds maximum
allowed. Hardware has been shut down.
[121030.457939] eth1: Device temperature 100 degrees C exceeds maximum
allowed. Hardware has been shut down.
[121030.457990] eth2: Device temperature 100 degrees C exceeds maximum
allowed. Hardware has been shut down.
[121062.437873] netxen_nic: card response timeout.
[121062.437902] netxen_nic: Failed to destroy rx ctx in firmware
[121094.417869] netxen_nic: card response timeout.
[121094.417898] netxen_nic: Failed to destroy tx ctx in firmware
[121094.460703] eth3: Device temperature 100 degrees C exceeds maximum
allowed. Hardware has been shut down.
But I am sure that this temerature can't exist.
And after this error network card doesn't work too.
I can not tell exaclty what model of network card is used, but I can
say that server which is used is HP ProLiant ML370 G6.
$ lspci -vs 06:00.0
06:00.0 Ethernet controller: NetXen Incorporated NX3031 Multifunction
1/10-Gigabit Server Adapter (rev 42)
Subsystem: Hewlett-Packard Company NC375i Integrated Quad Port
Multifunction Gigabit Server Adapter
Flags: bus master, fast devsel, latency 0, IRQ 24
Memory at fae00000 (64-bit, non-prefetchable) [size=2M]
Memory at f8000000 (64-bit, non-prefetchable) [size=32M]
Capabilities: <access denied>
Kernel driver in use: netxen_nic
Kernel modules: netxen_nic
$ dmesg |grep eth
[ 1.796876] ACPI Error (psparse-0537): Method parse/execution
failed [\_SB_._OSC] (Node ffff880426c14f20), AE_AML_BUFFER_LIMIT
[ 2.432767] netxen_nic 0000:06:00.0: eth0: GbE port initialized
[ 2.434177] netxen_nic 0000:06:00.1: eth1: GbE port initialized
[ 2.435628] netxen_nic 0000:06:00.2: eth2: GbE port initialized
[ 2.437115] netxen_nic 0000:06:00.3: eth3: GbE port initialized
[ 8.754656] netxen_nic: eth0 NIC Link is up
[ 8.755739] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.760126] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 19.319590] eth0: no IPv6 routers present
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-3-amd64 (SMP w/16 CPU cores)
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
firmware-bnx2 depends on no packages.
firmware-bnx2 recommends no packages.
Versions of packages firmware-bnx2 suggests:
ii initramfs-tools 0.93.4 tools for generating an initramfs
ii linux-image-2.6.26-2-amd64 [l 2.6.26-21 Linux 2.6.26 image on AMD64
ii linux-image-2.6.32-3-amd64 [l 2.6.32-9 Linux 2.6.32 for 64-bit PCs
-- no debconf information
Reply to: