--- Begin Message ---
Package: linux-image-2.6.32-4-xen-686
Version: 2.6.32-10
Dom0 crashes at a very early stage during the boot process. The messages
seem to be very similar to:
http://lists.xensource.com/archives/html/xen-devel/2010-03/msg00243.html
(see attached log from serial console of the server)
The issue seems to have something to do with LAPIC/IOAPIC. I can make Dom0
boot with "nolapic" commandline. (But that -- of course -- is no fun as
the SAS controller cannot be initialized then...)
later on in the same thread Jeremy Fitzhardinge mentions that he commited a
fix:
http://lists.xensource.com/archives/html/xen-devel/2010-03/msg01195.html
but I was unable to find that fix and therefore could not test it.
-- Adi Kriegisch
Booting command-list root (hd0,0)
Filesystem type is ext2fs, partition type 0xfd
kernel /xen-3.4-i386.gz com1=115200,8n1 console=com1,vga dom0_mem=1024M loglvl=all guest_loglvl=all sync_console console_to_ring lapic=debug apic_verbosity=debug [Multiboot-elf, <0x100000:0x1005bc:0x58a44>, shtab=0x259078, entry=0x100000]
module /vmlinuz-2.6.32-4-xen-686 root=/dev/mapper/zeus-root ro console=tty0 console=hvc0 earlyprintk=xen nomodeset initcall_debug debug iommu=soft swiotlb=force [Multiboot-module @ 0x25a000, 0x2465c0 bytes]
module /initrd.img-2.6.32-4-xen-686
[Multiboot-module @ 0x4a1000, 0x126c200 bytes]
(XEN) Xen version 3.4 (Debian 3.4.3~rc3-1) (waldi@debian.org) (gcc version 4.4.3 (Debian 4.4.3-3) ) Mon Mar 1 22:03:27 UTC 2010
(XEN) Console output is synchronous.
(XEN) Command line: com1=115200,8n1 console=com1,vga dom0_mem=1024M loglvl=all guest_loglvl=all sync_console console_to_ring lapic=debug apic_verbosity=debug
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds
(XEN) EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN) Found 2 MBR signatures
(XEN) Found 2 EDD information structures
(XEN) WARNING: Only the first 16 GB of the physical memory map can be accessed by Xen in 32-bit mode.
(XEN) Truncating RAM from 18874368kB to 16777216kB
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009c000 (usable)
(XEN) 000000000009c000 - 00000000000a0000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 000000007d8ee000 (usable)
(XEN) 000000007d8ee000 - 000000007d99e000 (reserved)
(XEN) 000000007d99e000 - 000000007f68f000 (usable)
(XEN) 000000007f68f000 - 000000007f6df000 (reserved)
(XEN) 000000007f6df000 - 000000007f7df000 (ACPI NVS)
(XEN) 000000007f7df000 - 000000007f7ff000 (ACPI data)
(XEN) 000000007f7ff000 - 000000007f800000 (usable)
(XEN) 000000007f800000 - 0000000090000000 (reserved)
(XEN) 00000000fed1c000 - 00000000fed20000 (reserved)
(XEN) 00000000ff800000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000400000000 (usable)
(XEN) System RAM: 14325MB (14669296kB)
(XEN) ACPI: RSDP 000FDFD0, 0024 (r2 IBM )
(XEN) ACPI: XSDT 7F7FE120, 008C (r1 IBM THURLEY 0 1000013)
(XEN) ACPI: FACP 7F7FB000, 00F4 (r4 IBM THURLEY 0 IBM 1000013)
(XEN) ACPI: DSDT 7F7F8000, 2772 (r1 IBM THURLEY 3 IBM 1000013)
(XEN) ACPI: FACS 7F735000, 0040
(XEN) ACPI: TCPA 7F7FD000, 0064 (r0 0 0)
(XEN) ACPI: APIC 7F7F7000, 00DE (r2 IBM THURLEY 0 IBM 1000013)
(XEN) ACPI: MCFG 7F7F6000, 003C (r1 IBM THURLEY 1 IBM 1000013)
(XEN) ACPI: SLIC 7F7F5000, 0176 (r1 IBM THURLEY 0 IBM 1000013)
(XEN) ACPI: HPET 7F7F4000, 0038 (r1 IBM THURLEY 1 IBM 1000013)
(XEN) ACPI: SRAT 7F7F3000, 01A8 (r2 IBM THURLEY 1 IBM 1000013)
(XEN) ACPI: SLIT 7F7F2000, 0030 (r1 IBM THURLEY 0 IBM 1000013)
(XEN) ACPI: SSDT 7F7F1000, 0113 (r2 IBM CPUSCOPE 4000 IBM 1000013)
(XEN) ACPI: SSDT 7F7EF000, 1404 (r2 IBM PSTATEPM 4000 IBM 1000013)
(XEN) ACPI: SSDT 7F7EE000, 0832 (r2 IBM CPUCSTAT 4000 IBM 1000013)
(XEN) ACPI: ERST 7F7ED000, 0230 (r1 IBM THURLEY 1 IBM 1000013)
(XEN) ACPI: DMAR 7F7EC000, 00D8 (r1 IBM THURLEY 1 IBM 1000013)
(XEN) NUMA turned off
(XEN) Faking a node at 0000000000000000-0000000400000000
(XEN) Xen heap: 9MB (9364kB)
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 0009c140
(XEN) DMI 2.5 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x588
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[584,0], pm1x_evt[580,0]
(XEN) ACPI: wakeup_vec[7f73500c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
(XEN) Processor #0 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
(XEN) Processor #2 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
(XEN) Processor #4 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
(XEN) Processor #6 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled)
(XEN) Processor #16 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled)
(XEN) Processor #18 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled)
(XEN) Processor #20 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
(XEN) Processor #22 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x01] enabled)
(XEN) Processor #1 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x03] enabled)
(XEN) Processor #3 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x05] enabled)
(XEN) Processor #5 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x07] enabled)
(XEN) Processor #7 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x11] enabled)
(XEN) Processor #17 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x13] enabled)
(XEN) Processor #19 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x15] enabled)
(XEN) Processor #21 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x17] enabled)
(XEN) Processor #23 7:10 APIC version 21
(XEN) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
(XEN) Overriding APIC driver with bigsmp
(XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
(XEN) IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Phys. Using 2 I/O APICs
(XEN) ACPI: HPET id: 0x8086a301 base: 0xfed00000
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) mapped APIC to fffde000 (fee00000)
(XEN) mapped IOAPIC to fffdd000 (fec00000)
(XEN) mapped IOAPIC to fffdc000 (fec80000)
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Initializing CPU#0
(XEN) Detected 2266.778 MHz processor.
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 8192K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 0
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Extended Page Tables (EPT)
(XEN) - Virtual-Processor Identifiers (VPID)
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) VMX: EPT is available.
(XEN) VMX: VPID is available.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging detected.
(XEN) Intel machine check reporting enabled on CPU#0.
(XEN) CPU0: Thermal monitoring enabled (TM1)
(XEN) CMCI: find owner on CPU0
(XEN) CMCI: CPU0 owner_map[16c], no_cmci_map[93]
(XEN) CPU0: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz stepping 05
(XEN) Getting VERSION: 60015
(XEN) Getting VERSION: 60015
(XEN) Getting ID: 0
(XEN) Getting LVT0: 700
(XEN) Getting LVT1: 400
(XEN) enabled ExtINT on CPU#0
(XEN) Booting processor 1/2 eip 88000
(XEN) Initializing CPU#1
(XEN) masked ExtINT on CPU#1
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 8192K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 1
(XEN) Intel machine check reporting enabled on CPU#1.
(XEN) CPU1: Thermal monitoring enabled (TM1)
(XEN) CMCI: find owner on CPU1
(XEN) CMCI: CPU1 owner_map[2c], no_cmci_map[93]
(XEN) CPU1: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz stepping 05
(XEN) Booting processor 2/4 eip 88000
(XEN) Initializing CPU#2
(XEN) masked ExtINT on CPU#2
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 8192K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 2
(XEN) Intel machine check reporting enabled on CPU#2.
(XEN) CPU2: Thermal monitoring enabled (TM1)
(XEN) CMCI: find owner on CPU2
(XEN) CMCI: CPU2 owner_map[2c], no_cmci_map[93]
(XEN) CPU2: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz stepping 05
(XEN) Booting processor 3/6 eip 88000
(XEN) Initializing CPU#3
(XEN) masked ExtINT on CPU#3
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 8192K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 3
(XEN) Intel machine check reporting enabled on CPU#3.
(XEN) CPU3: Thermal monitoring enabled (TM1)
(XEN) CMCI: find owner on CPU3
(XEN) CMCI: CPU3 owner_map[2c], no_cmci_map[93]
(XEN) CPU3: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz stepping 05
(XEN) Booting processor 4/16 eip 88000
(XEN) Initializing CPU#4
(XEN) masked ExtINT on CPU#4
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 8192K
(XEN) CPU: Physical Processor ID: 1
(XEN) CPU: Processor Core ID: 0
(XEN) Intel machine check reporting enabled on CPU#4.
(XEN) CPU4: Thermal monitoring enabled (TM1)
(XEN) CMCI: find owner on CPU4
(XEN) CMCI: CPU4 owner_map[16c], no_cmci_map[93]
(XEN) CPU4: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz stepping 05
(XEN) Booting processor 5/18 eip 88000
(XEN) Initializing CPU#5
(XEN) masked ExtINT on CPU#5
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 8192K
(XEN) CPU: Physical Processor ID: 1
(XEN) CPU: Processor Core ID: 1
(XEN) Intel machine check reporting enabled on CPU#5.
(XEN) CPU5: Thermal monitoring enabled (TM1)
(XEN) CMCI: find owner on CPU5
(XEN) CMCI: CPU5 owner_map[2c], no_cmci_map[93]
(XEN) CPU5: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz stepping 05
(XEN) Booting processor 6/20 eip 88000
(XEN) Initializing CPU#6
(XEN) masked ExtINT on CPU#6
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 8192K
(XEN) CPU: Physical Processor ID: 1
(XEN) CPU: Processor Core ID: 2
(XEN) Intel machine check reporting enabled on CPU#6.
(XEN) CPU6: Thermal monitoring enabled (TM1)
(XEN) CMCI: find owner on CPU6
(XEN) CMCI: CPU6 owner_map[2c], no_cmci_map[93]
(XEN) CPU6: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz stepping 05
(XEN) Booting processor 7/22 eip 88000
(XEN) Initializing CPU#7
(XEN) masked ExtINT on CPU#7
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 8192K
(XEN) CPU: Physical Processor ID: 1
(XEN) CPU: Processor Core ID: 3
(XEN) Intel machine check reporting enabled on CPU#7.
(XEN) CPU7: Thermal monitoring enabled (TM1)
(XEN) CMCI: find owner on CPU7
(XEN) CMCI: CPU7 owner_map[2c], no_cmci_map[93]
(XEN) CPU7: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz stepping 05
(XEN) Booting processor 8/1 eip 88000
(XEN) Initializing CPU#8
(XEN) masked ExtINT on CPU#8
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 8192K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 0
(XEN) Intel machine check reporting enabled on CPU#8.
(XEN) CPU8: Thermal monitoring enabled (TM1)
(XEN) CMCI: find owner on CPU8
(XEN) CMCI: CPU8 owner_map[0], no_cmci_map[93]
(XEN) CPU8: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz stepping 05
(XEN) Booting processor 9/3 eip 88000
(XEN) Initializing CPU#9
(XEN) masked ExtINT on CPU#9
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 8192K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 1
(XEN) Intel machine check reporting enabled on CPU#9.
(XEN) CPU9: Thermal monitoring enabled (TM1)
(XEN) CMCI: find owner on CPU9
(XEN) CMCI: CPU9 owner_map[0], no_cmci_map[93]
(XEN) CPU9: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz stepping 05
(XEN) Booting processor 10/5 eip 88000
(XEN) Initializing CPU#10
(XEN) masked ExtINT on CPU#10
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 8192K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 2
(XEN) Intel machine check reporting enabled on CPU#10.
(XEN) CPU10: Thermal monitoring enabled (TM1)
(XEN) CMCI: find owner on CPU10
(XEN) CMCI: CPU10 owner_map[0], no_cmci_map[93]
(XEN) CPU10: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz stepping 05
(XEN) Booting processor 11/7 eip 88000
(XEN) Initializing CPU#11
(XEN) masked ExtINT on CPU#11
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 8192K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 3
(XEN) Intel machine check reporting enabled on CPU#11.
(XEN) CPU11: Thermal monitoring enabled (TM1)
(XEN) CMCI: find owner on CPU11
(XEN) CMCI: CPU11 owner_map[0], no_cmci_map[93]
(XEN) CPU11: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz stepping 05
(XEN) Booting processor 12/17 eip 88000
(XEN) Initializing CPU#12
(XEN) masked ExtINT on CPU#12
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 8192K
(XEN) CPU: Physical Processor ID: 1
(XEN) CPU: Processor Core ID: 0
(XEN) Intel machine check reporting enabled on CPU#12.
(XEN) CPU12: Thermal monitoring enabled (TM1)
(XEN) CMCI: find owner on CPU12
(XEN) CMCI: CPU12 owner_map[0], no_cmci_map[93]
(XEN) CPU12: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz stepping 05
(XEN) Booting processor 13/19 eip 88000
(XEN) Initializing CPU#13
(XEN) masked ExtINT on CPU#13
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 8192K
(XEN) CPU: Physical Processor ID: 1
(XEN) CPU: Processor Core ID: 1
(XEN) Intel machine check reporting enabled on CPU#13.
(XEN) CPU13: Thermal monitoring enabled (TM1)
(XEN) CMCI: find owner on CPU13
(XEN) CMCI: CPU13 owner_map[0], no_cmci_map[93]
(XEN) CPU13: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz stepping 05
(XEN) Booting processor 14/21 eip 88000
(XEN) Initializing CPU#14
(XEN) masked ExtINT on CPU#14
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 8192K
(XEN) CPU: Physical Processor ID: 1
(XEN) CPU: Processor Core ID: 2
(XEN) Intel machine check reporting enabled on CPU#14.
(XEN) CPU14: Thermal monitoring enabled (TM1)
(XEN) CMCI: find owner on CPU14
(XEN) CMCI: CPU14 owner_map[0], no_cmci_map[93]
(XEN) CPU14: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz stepping 05
(XEN) Booting processor 15/23 eip 88000
(XEN) Initializing CPU#15
(XEN) masked ExtINT on CPU#15
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 8192K
(XEN) CPU: Physical Processor ID: 1
(XEN) CPU: Processor Core ID: 3
(XEN) Intel machine check reporting enabled on CPU#15.
(XEN) CPU15: Thermal monitoring enabled (TM1)
(XEN) CMCI: find owner on CPU15
(XEN) CMCI: CPU15 owner_map[0], no_cmci_map[93]
(XEN) CPU15: Intel(R) Xeon(R) CPU L5520 @ 2.27GHz stepping 05
(XEN) Total of 16 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) init IO_APIC IRQs
(XEN) IO-APIC (apicid-pin) 8-0, 8-16, 8-17, 8-18, 8-19, 8-20, 8-21, 8-22, 8-23, 9-0, 9-1, 9-2, 9-3, 9-4, 9-5, 9-6, 9-7, 9-8, 9-9, 9-10, 9-11, 9-12, 9-13, 9-14, 9-15, 9-16, 9-17, 9-18, 9-19, 9-20, 9-21, 9-22, 9-23 not connected.
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) number of MP IRQ sources: 15.
(XEN) number of IO-APIC #8 registers: 24.
(XEN) number of IO-APIC #9 registers: 24.
(XEN) testing the IO APIC.......................
(XEN) IO APIC #8......
(XEN) .... register #00: 08000000
(XEN) ....... : physical APIC id: 08
(XEN) ....... : Delivery Type: 0
(XEN) ....... : LTS : 0
(XEN) .... register #01: 00170020
(XEN) ....... : max redirection entries: 0017
(XEN) ....... : PRQ implemented: 0
(XEN) ....... : IO APIC version: 0020
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 000 00 1 0 0 0 0 0 0 00
(XEN) 01 000 00 0 0 0 0 0 0 0 20
(XEN) 02 000 00 0 0 0 0 0 0 0 F0
(XEN) 03 000 00 0 0 0 0 0 0 0 28
(XEN) 04 000 00 0 0 0 0 0 0 0 F1
(XEN) 05 000 00 0 0 0 0 0 0 0 30
(XEN) 06 000 00 0 0 0 0 0 0 0 38
(XEN) 07 000 00 0 0 0 0 0 0 0 40
(XEN) 08 000 00 0 0 0 0 0 0 0 48
(XEN) 09 000 00 1 1 0 0 0 0 0 50
(XEN) 0a 000 00 0 0 0 0 0 0 0 58
(XEN) 0b 000 00 0 0 0 0 0 0 0 60
(XEN) 0c 000 00 0 0 0 0 0 0 0 68
(XEN) 0d 000 00 0 0 0 0 0 0 0 70
(XEN) 0e 000 00 0 0 0 0 0 0 0 78
(XEN) 0f 000 00 0 0 0 0 0 0 0 88
(XEN) 10 000 00 1 0 0 0 0 0 0 00
(XEN) 11 000 00 1 0 0 0 0 0 0 00
(XEN) 12 000 00 1 0 0 0 0 0 0 00
(XEN) 13 000 00 1 0 0 0 0 0 0 00
(XEN) 14 000 00 1 0 0 0 0 0 0 00
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
(XEN) 17 000 00 1 0 0 0 0 0 0 00
(XEN) IO APIC #9......
(XEN) .... register #00: 09000000
(XEN) ....... : physical APIC id: 09
(XEN) ....... : Delivery Type: 0
(XEN) ....... : LTS : 0
(XEN) .... register #01: 00170020
(XEN) ....... : max redirection entries: 0017
(XEN) ....... : PRQ implemented: 0
(XEN) ....... : IO APIC version: 0020
(XEN) .... register #02: 00000000
(XEN) ....... : arbitration: 00
(XEN) .... register #03: 00000001
(XEN) ....... : Boot DT : 1
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 000 00 1 0 0 0 0 0 0 00
(XEN) 01 000 00 1 0 0 0 0 0 0 00
(XEN) 02 000 00 1 0 0 0 0 0 0 00
(XEN) 03 000 00 1 0 0 0 0 0 0 00
(XEN) 04 000 00 1 0 0 0 0 0 0 00
(XEN) 05 000 00 1 0 0 0 0 0 0 00
(XEN) 06 000 00 1 0 0 0 0 0 0 00
(XEN) 07 000 00 1 0 0 0 0 0 0 00
(XEN) 08 000 00 1 0 0 0 0 0 0 00
(XEN) 09 000 00 1 0 0 0 0 0 0 00
(XEN) 0a 000 00 1 0 0 0 0 0 0 00
(XEN) 0b 000 00 1 0 0 0 0 0 0 00
(XEN) 0c 000 00 1 0 0 0 0 0 0 00
(XEN) 0d 000 00 1 0 0 0 0 0 0 00
(XEN) 0e 000 00 1 0 0 0 0 0 0 00
(XEN) 0f 000 00 1 0 0 0 0 0 0 00
(XEN) 10 000 00 1 0 0 0 0 0 0 00
(XEN) 11 000 00 1 0 0 0 0 0 0 00
(XEN) 12 000 00 1 0 0 0 0 0 0 00
(XEN) 13 000 00 1 0 0 0 0 0 0 00
(XEN) 14 000 00 1 0 0 0 0 0 0 00
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
(XEN) 17 000 00 1 0 0 0 0 0 0 00
(XEN) Using vector-based indexing
(XEN) IRQ to pin mappings:
(XEN) IRQ240 -> 0:2
(XEN) IRQ32 -> 0:1
(XEN) IRQ40 -> 0:3
(XEN) IRQ241 -> 0:4
(XEN) IRQ48 -> 0:5
(XEN) IRQ56 -> 0:6
(XEN) IRQ64 -> 0:7
(XEN) IRQ72 -> 0:8
(XEN) IRQ80 -> 0:9
(XEN) IRQ88 -> 0:10
(XEN) IRQ96 -> 0:11
(XEN) IRQ104 -> 0:12
(XEN) IRQ112 -> 0:13
(XEN) IRQ120 -> 0:14
(XEN) IRQ136 -> 0:15
(XEN) .................................... done.
(XEN) Using local APIC timer interrupts.
(XEN) calibrating APIC timer ...
(XEN) ..... CPU clock speed is 2266.8177 MHz.
(XEN) ..... host bus clock speed is 133.3422 MHz.
(XEN) ..... bus_scale = 0x0000888D
(XEN) checking TSC synchronization across 16 CPUs: passed.
(XEN) Platform timer is 14.318MHz HPET
�(XEN) microcode.c:73:d32767 microcode: CPU1 resumed
(XEN) microcode.c:73:d32767 microcode: CPU3 resumed
(XEN) microcode.c:73:d32767 microcode: CPU4 resumed
(XEN) microcode.c:73:d32767 microcode: CPU12 resumed
(XEN) microcode.c:73:d32767 microcode: CPU15 resumed
(XEN) microcode.c:73:d32767 microcode: CPU7 resumed
(XEN) microcode.c:73:d32767 microcode: CPU10 resumed
(XEN) microcode.c:73:d32767 microcode: CPU2 resumed
(XEN) microcode.c:73:d32767 microcode: CPU6 resumed
(XEN) microcode.c:73:d32767 microcode: CPU14 resumed
(XEN) microcode.c:73:d32767 microcode: CPU11 resumed
(XEN) microcode.c:73:d32767 microcode: CPU5 resumed
(XEN) microcode.c:73:d32767 microcode: CPU13 resumed
(XEN) microcode.c:73:d32767 microcode: CPU8 resumed
(XEN) microcode.c:73:d32767 microcode: CPU9 resumed
(XEN) Brought up 16 CPUs
(XEN) I/O virtualisation disabled
(XEN) HPET: 4 timers in total, 0 timers will be used for broadcast
(XEN) ACPI sleep modes: S3
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 32-bit, PAE, lsb
(XEN) Dom0 kernel: 32-bit, PAE, lsb, paddr 0x1000000 -> 0x1637000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000038000000->000000003c000000 (245760 pages to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: c1000000->c1637000
(XEN) Init. ramdisk: c1637000->c28a3200
(XEN) Phys-Mach map: c28a4000->c29a4000
(XEN) Start info: c29a4000->c29a447c
(XEN) Page tables: c29a5000->c29c0000
(XEN) Boot stack: c29c0000->c29c1000
(XEN) TOTAL: c0000000->c2c00000
(XEN) ENTRY ADDRESS: c13e5000
(XEN) Dom0 has maximum 16 VCPUs
(XEN) Scrubbing Free RAM: ....................................................................................................................................done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) **********************************************
(XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS
(XEN) ******* This option is intended to aid debugging of Xen by ensuring
(XEN) ******* that all output is synchronously delivered on the serial line.
(XEN) ******* However it can introduce SIGNIFICANT latencies and affect
(XEN) ******* timekeeping. It is NOT recommended for production use!
(XEN) **********************************************
(XEN) 3... 2... 1...
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 120kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
[ 0.000000] Reserving virtual address space above 0xf5800000
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-4-xen-686 (Debian 2.6.32-10) (maks@debian.org) (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Wed Mar 17 20:34:44 UTC 2010
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 000000000009c000 (usable)
[ 0.000000] Xen: 000000000009c000 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 0000000040000000 (usable)
[ 0.000000] Xen: 000000007d8ee000 - 000000007d99e000 (reserved)
[ 0.000000] Xen: 000000007f68f000 - 000000007f6df000 (reserved)
[ 0.000000] Xen: 000000007f6df000 - 000000007f7df000 (ACPI NVS)
[ 0.000000] Xen: 000000007f7df000 - 000000007f7ff000 (ACPI data)
[ 0.000000] Xen: 000000007f800000 - 0000000090000000 (reserved)
[ 0.000000] Xen: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] Xen: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] bootconsole [xenboot0] enabled
[ 0.000000] DMI 2.5 present.
[ 0.000000] last_pfn = 0x40000 max_arch_pfn = 0x1000000
[ 0.000000] initial memory mapped : 0 - 033ff000
[ 0.000000] init_memory_mapping: 0000000000000000-000000002cffe000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0000000000 - 002cffe000 page 4k
[ 0.000000] kernel direct mapping tables up to 2cffe000 @ 100000-26d000
[ 0.000000] RAMDISK: 01637000 - 028a3200
[ 0.000000] ACPI: RSDP 000fdfd0 00024 (v02 IBM )
[ 0.000000] ACPI: XSDT 7f7fe120 0008C (v01 IBM THURLEY 00000000 01000013)
[ 0.000000] ACPI: FACP 7f7fb000 000F4 (v04 IBM THURLEY 00000000 IBM 01000013)
[ 0.000000] ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20090903/tbfadt-607)
[ 0.000000] ACPI: DSDT 7f7f8000 02772 (v01 IBM THURLEY 00000003 IBM 01000013)
[ 0.000000] ACPI: FACS 7f735000 00040
[ 0.000000] ACPI: TCPA 7f7fd000 00064 (v00 00000000 00000000)
[ 0.000000] ACPI: APIC 7f7f7000 000DE (v02 IBM THURLEY 00000000 IBM 01000013)
[ 0.000000] ACPI: MCFG 7f7f6000 0003C (v01 IBM THURLEY 00000001 IBM 01000013)
[ 0.000000] ACPI: SLIC 7f7f5000 00176 (v01 IBM THURLEY 00000000 IBM 01000013)
[ 0.000000] ACPI: HPET 7f7f4000 00038 (v01 IBM THURLEY 00000001 IBM 01000013)
[ 0.000000] ACPI: SRAT 7f7f3000 001A8 (v02 IBM THURLEY 00000001 IBM 01000013)
[ 0.000000] ACPI: SLIT 7f7f2000 00030 (v01 IBM THURLEY 00000000 IBM 01000013)
[ 0.000000] ACPI: SSDT 7f7f1000 00113 (v02 IBM CPUSCOPE 00004000 IBM 01000013)
[ 0.000000] ACPI: SSDT 7f7ef000 01404 (v02 IBM PSTATEPM 00004000 IBM 01000013)
[ 0.000000] ACPI: SSDT 7f7ee000 00832 (v02 IBM CPUCSTAT 00004000 IBM 01000013)
[ 0.000000] ACPI: ERST 7f7ed000 00230 (v01 IBM THURLEY 00000001 IBM 01000013)
[ 0.000000] ACPI: 7f7ec000 000D8 (v01 IBM THURLEY 00000001 IBM 01000013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 304MB HIGHMEM available.
[ 0.000000] 719MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 2cffe000
[ 0.000000] low ram: 0 - 2cffe000
[ 0.000000] node 0 low ram: 00000000 - 2cffe000
[ 0.000000] node 0 bootmap 00007000 - 0000ca00
[ 0.000000] (10 early reservations) ==> bootmem [0000000000 - 002cffe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [00029a5000 - 00029c0000] XEN PAGETABLES ==> [00029a5000 - 00029c0000]
[ 0.000000] #2 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #3 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #4 [0001000000 - 0001511dd4] TEXT DATA BSS ==> [0001000000 - 0001511dd4]
[ 0.000000] #5 [0001637000 - 00028a3200] RAMDISK ==> [0001637000 - 00028a3200]
[ 0.000000] #6 [00028a4000 - 00029a5000] XEN START INFO ==> [00028a4000 - 00029a5000]
[ 0.000000] #7 [0001512000 - 0001512360] BRK ==> [0001512000 - 0001512360]
[ 0.000000] #8 [0000100000 - 0000251000] PGTABLE ==> [0000100000 - 0000251000]
[ 0.000000] #9 [0000007000 - 000000d000] BOOTMAP ==> [0000007000 - 000000d000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0002cffe
[ 0.000000] HighMem 0x0002cffe -> 0x00040000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009c
[ 0.000000] 0: 0x00000100 -> 0x00040000
[ 0.000000] On node 0 totalpages: 262044
[ 0.000000] free_area_init_node: node 0, pgdat c13db060, node_mem_map c29c0000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3964 pages, LIFO batch:0
[ 0.000000] Normal zone: 1408 pages used for memmap
[ 0.000000] Normal zone: 178814 pages, LIFO batch:31
[ 0.000000] HighMem zone: 609 pages used for memmap
[ 0.000000] HighMem zone: 77217 pages, LIFO batch:15
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x588
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x15] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x17] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
(XEN) mm.c:1699:d0 Bad L1 flags 100
(XEN) mm.c:720:d0 Bad L1 flags 100
(XEN) mm.c:4221:d0 ptwr_emulate: could not get_page_from_l1e()
(XEN) d0:v0: unhandled page fault (ec=0003)
(XEN) Pagetable walk from c0250fd0:
(XEN) L3[0x003] = 000000003945c001 0000145c
(XEN) L2[0x001] = 000000003a9ab067 000029ab
(XEN) L1[0x050] = 0000000038250061 00000250
(XEN) domain_crash_sync called from entry.S (ff1b2a0e)
(XEN) Domain 0 (vcpu#0) crashed on cpu#0:
(XEN) ----[ Xen-3.4 x86_32p debug=n Tainted: C ]----
(XEN) CPU: 0
(XEN) EIP: e019:[<c1005903>]
(XEN) EFLAGS: 00000246 EM: 1 CONTEXT: pv guest
(XEN) eax: 00000000 ebx: 3945d163 ecx: 80000000 edx: 00000000
(XEN) esi: c0250fd0 edi: 80000000 ebp: 8145d163 esp: c1377e64
(XEN) cr0: 8005003b cr4: 000026f0 cr3: 39379000 cr2: c0250fd0
(XEN) ds: e021 es: e021 fs: 00d8 gs: 00e0 ss: e021 cs: e019
(XEN) Guest stack trace from esp=c1377e64:
(XEN) 00000003 c1005903 0001e019 00010046 80000000 c0250fd0 f57fa000 c10263b4
(XEN) 3945d163 80000000 00000000 80000000 00000000 00000005 c10042e2 f57fa000
(XEN) 00000008 00000000 f54000de c1025542 00000000 c13f3cf4 0000017b 80000000
(XEN) f54000ac f54000ac c1300332 c13ef28d 00000001 c14066fd 00000001 000000de
(XEN) f5400000 00000000 00000000 40000000 00000000 c1406775 c13ef263 00000040
(XEN) c13ef82d 00000601 80867f18 167ff000 00000000 167ff000 00000000 c13e97c7
(XEN) 00000148 c1037fa1 00000606 028a3200 00000000 01637000 00000000 0126c200
(XEN) 01637000 c103846b 205b0000 00000035 00000000 00000000 00000000 000000a3
(XEN) 205b0000 30202020 3030302e 5d303030 00000000 00000000 00000000 00000000
(XEN) c13b8b2c 00000002 00000002 00000000 c1005daa 02077d72 00000000 c1415320
(XEN) 02077d72 00000000 c1415320 c13b1cf0 00000000 c13e55b0 c12f7ea4 c128a010
(XEN) 02077d72 a7cecddb c1416534 c29a4458 c13e7289 6c000018 c1409044 1fc89375
(XEN) 80980281 00100800 000106a5 00000001 00000000 c29a4000 00000000
(XEN) Domain 0 crashed: rebooting machine in 5 seconds.
--- End Message ---