Bug#576942: /boot/vmlinuz-2.6.32-3-amd64: kernel fix for wrong mtrr mask from MS-7252 bios may be wrong and cause problems with fglrx-driver
Package: linux-2.6
Version: 2.6.32-9
Severity: normal
File: /boot/vmlinuz-2.6.32-3-amd64
I reported the following bug against fglrx-driver
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=554847
(fglrx driver > 9.8 showing black screen or crashing the whole system
on my hardware)
which was closed because the maintainer thinks it's a bug in the
kernel.
In particular the following lines in the kernel log
[ 0.000000] WARNING: at /build/mattems-linux-2.6_2.6.32-9-amd64-NYTFdD/linux-2.6-2.6.32-9/debian/build/source_amd64_none/arch/x86/kernel/cpu/mtrr/generic.c:467 generic_get_mtrr+0xbf/0xf9()
[ 0.000000] Hardware name: MS-7252
[ 0.000000] mtrr: your BIOS has set up an incorrect mask, fixing it up.
etc.
are supposed to indicate a crash in the kernel.
I have included the full dmesg output below, currently running the
free radeon driver + module.
I have included any information that reportbug has asked me to,
excluding the network configuration and I have extended the kernel log
with the full dmesg output.
Please tell me if there's any further useful information I can provide.
I'm grateful for any assistance I can receive on this issue, as my
system gets more and more unusable as kernel and driver versions are
progressing and I'm getting all sorts of dependency issues because I
have to hold on to outdated xorg, driver and kernel versions.
-- Package-specific info:
** Version:
Linux version 2.6.32-3-amd64 (Debian 2.6.32-9) (maks@debian.org) (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Wed Feb 24 18:07:42 UTC 2010
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-3-amd64 root=/dev/mapper/lvm-root ro quiet
** Tainted: W (512)
* Taint on warning.
** Kernel log:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-3-amd64 (Debian 2.6.32-9) (maks@debian.org) (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Wed Feb 24 18:07:42 UTC 2010
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.32-3-amd64 root=/dev/mapper/lvm-root ro quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000005ffc0000 (usable)
[ 0.000000] BIOS-e820: 000000005ffc0000 - 000000005ffce000 (ACPI data)
[ 0.000000] BIOS-e820: 000000005ffce000 - 000000005fff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000005fff0000 - 0000000060000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x5ffc0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 base 0040000000 mask FFE0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 base 00000FC000 mask 0FFFFFC000 write-protect
[ 0.000000] 5 base 00000DC000 mask 0FFFFFE000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: at /build/mattems-linux-2.6_2.6.32-9-amd64-NYTFdD/linux-2.6-2.6.32-9/debian/build/source_amd64_none/arch/x86/kernel/cpu/mtrr/generic.c:467 generic_get_mtrr+0xbf/0xf9()
[ 0.000000] Hardware name: MS-7252
[ 0.000000] mtrr: your BIOS has set up an incorrect mask, fixing it up.
[ 0.000000] Modules linked in:
[ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.32-3-amd64 #1
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff8102238b>] ? generic_get_mtrr+0xbf/0xf9
[ 0.000000] [<ffffffff8102238b>] ? generic_get_mtrr+0xbf/0xf9
[ 0.000000] [<ffffffff8104dbf0>] ? warn_slowpath_common+0x77/0xa3
[ 0.000000] [<ffffffff8104dc78>] ? warn_slowpath_fmt+0x51/0x59
[ 0.000000] [<ffffffff81022497>] ? mtrr_wrmsr+0x1c/0x49
[ 0.000000] [<ffffffff8102269c>] ? get_fixed_ranges+0x71/0x98
[ 0.000000] [<ffffffff81022497>] ? mtrr_wrmsr+0x1c/0x49
[ 0.000000] [<ffffffff8102255b>] ? prepare_set+0x97/0x9d
[ 0.000000] [<ffffffff810225b4>] ? post_set+0x53/0x60
[ 0.000000] [<ffffffff814e1c6b>] ? get_mtrr_state+0x2eb/0x2f6
[ 0.000000] [<ffffffff8102238b>] ? generic_get_mtrr+0xbf/0xf9
[ 0.000000] [<ffffffff812ed452>] ? printk+0x4e/0x5c
[ 0.000000] [<ffffffff814e2842>] ? mtrr_trim_uncached_memory+0x91/0x311
[ 0.000000] [<ffffffff814e17db>] ? mtrr_bp_init+0x1b1/0x1d4
[ 0.000000] [<ffffffff8122f2d2>] ? dmi_name_in_serial+0x1d/0x28
[ 0.000000] [<ffffffff814ebacc>] ? early_gart_iommu_check+0x9b/0x287
[ 0.000000] [<ffffffff814ddd09>] ? setup_arch+0x43f/0x9c6
[ 0.000000] [<ffffffff811ef173>] ? extract_entropy+0x6a/0x125
[ 0.000000] [<ffffffff814da140>] ? early_idt_handler+0x0/0x71
[ 0.000000] [<ffffffff814da9d6>] ? start_kernel+0xcf/0x3dc
[ 0.000000] [<ffffffff814da3b7>] ? x86_64_start_kernel+0xf9/0x106
[ 0.000000] ---[ end trace a7919e7f17c0a725 ]---
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000005ffc0000
[ 0.000000] 0000000000 - 005fe00000 page 2M
[ 0.000000] 005fe00000 - 005ffc0000 page 4k
[ 0.000000] kernel direct mapping tables up to 5ffc0000 @ 10000-14000
[ 0.000000] RAMDISK: 37638000 - 37feff54
[ 0.000000] ACPI: RSDP 00000000000f8ae0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 000000005ffc0000 00038 (v01 A M I OEMRSDT 04000818 MSFT 00000097)
[ 0.000000] ACPI: FACP 000000005ffc0200 00084 (v02 A M I OEMFACP 04000818 MSFT 00000097)
[ 0.000000] ACPI: DSDT 000000005ffc0440 048DD (v01 1ADIF 1ADIF006 00000006 INTL 20051117)
[ 0.000000] ACPI: FACS 000000005ffce000 00040
[ 0.000000] ACPI: APIC 000000005ffc0390 00068 (v01 A M I OEMAPIC 04000818 MSFT 00000097)
[ 0.000000] ACPI: MCFG 000000005ffc0400 0003C (v01 A M I OEMMCFG 04000818 MSFT 00000097)
[ 0.000000] ACPI: OEMB 000000005ffce040 00060 (v01 A M I AMI_OEM 04000818 MSFT 00000097)
[ 0.000000] ACPI: SSDT 000000005ffc4d20 00136 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000005ffc0000
[ 0.000000] Bootmem setup node 0 0000000000000000-000000005ffc0000
[ 0.000000] NODE_DATA [0000000000012000 - 0000000000019fff]
[ 0.000000] bootmap [000000000001a000 - 0000000000025ff7] pages c
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 005ffc0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 000166aa14] TEXT DATA BSS ==> [0001000000 - 000166aa14]
[ 0.000000] #3 [0037638000 - 0037feff54] RAMDISK ==> [0037638000 - 0037feff54]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [000166b000 - 000166b1a5] BRK ==> [000166b000 - 000166b1a5]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] [ffffea0000000000-ffffea00015fffff] PMD -> [ffff880001c00000-ffff8800031fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0005ffc0
[ 0.000000] On node 0 totalpages: 393039
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 101 pages reserved
[ 0.000000] DMA zone: 3826 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 5320 pages used for memmap
[ 0.000000] DMA32 zone: 383736 pages, LIFO batch:31
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 60000000 (gap: 60000000:9ec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880001800000 s89880 r8192 d20712 u2097152
[ 0.000000] pcpu-alloc: s89880 r8192 d20712 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 387562
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-3-amd64 root=/dev/mapper/lvm-root ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 4410000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Memory: 1532668k/1572608k available (3014k kernel code, 452k absent, 39488k reserved, 1860k data, 580k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:256
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2401.447 MHz processor.
[ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4802.89 BogoMIPS (lpj=9605788)
[ 0.004033] Security Framework initialized
[ 0.004041] SELinux: Disabled at boot.
[ 0.004361] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.009816] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.011475] Mount-cache hash table entries: 256
[ 0.011820] Initializing cgroup subsys ns
[ 0.011824] Initializing cgroup subsys cpuacct
[ 0.011828] Initializing cgroup subsys devices
[ 0.011830] Initializing cgroup subsys freezer
[ 0.011832] Initializing cgroup subsys net_cls
[ 0.012016] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.012019] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.012021] CPU 0/0x0 -> Node 0
[ 0.012023] tseg: 0000000000
[ 0.012038] mce: CPU supports 5 MCE banks
[ 0.012050] using C1E aware idle routine
[ 0.012052] Performance Events: AMD PMU driver.
[ 0.012057] ... version: 0
[ 0.012058] ... bit width: 48
[ 0.012059] ... generic registers: 4
[ 0.012061] ... value mask: 0000ffffffffffff
[ 0.012063] ... max period: 00007fffffffffff
[ 0.012065] ... fixed-purpose events: 0
[ 0.012066] ... event mask: 000000000000000f
[ 0.012160] SMP alternatives: switching to UP code
[ 0.023509] Freeing SMP alternatives: 27k freed
[ 0.023524] ACPI: Core revision 20090903
[ 0.037156] Setting APIC routing to flat
[ 0.037655] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.044001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.044001] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.044001] ..... (found apic 0 pin 0) ...
[ 0.052001] ....... failed.
[ 0.052001] ...trying to set up timer as Virtual Wire IRQ...
[ 0.052001] ..... failed.
[ 0.052001] ...trying to set up timer as ExtINT IRQ...
[ 0.095028] ..... works.
[ 0.095029] CPU0: AMD Athlon(tm) 64 Processor 3800+ stepping 02
[ 0.096001] Brought up 1 CPUs
[ 0.096001] Total of 1 processors activated (4802.89 BogoMIPS).
[ 0.096001] CPU0 attaching NULL sched-domain.
[ 0.096001] devtmpfs: initialized
[ 0.096001] regulator: core version 0.5
[ 0.096001] NET: Registered protocol family 16
[ 0.096001] node 0 link 0: io port [1000, ffffff]
[ 0.096001] TOM: 0000000060000000 aka 1536M
[ 0.096001] node 0 link 0: mmio [e0000000, efffffff]
[ 0.096001] node 0 link 0: mmio [a0000, bffff]
[ 0.096001] node 0 link 0: mmio [60000000, fe0bffff]
[ 0.096001] bus: [00,ff] on node 0 link 0
[ 0.096001] bus: 00 index 0 io port: [0, ffff]
[ 0.096001] bus: 00 index 1 mmio: [60000000, fcffffffff]
[ 0.096001] bus: 00 index 2 mmio: [a0000, bffff]
[ 0.096001] ACPI: bus type pci registered
[ 0.096001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.096001] PCI: Not using MMCONFIG.
[ 0.096001] PCI: Using configuration type 1 for base access
[ 0.096243] bio: create slab <bio-0> at 0
[ 0.096811] ACPI: EC: Look up EC in DSDT
[ 0.099904] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.104463] ACPI: Interpreter enabled
[ 0.104467] ACPI: (supports S0 S3 S4 S5)
[ 0.104483] ACPI: Using IOAPIC for interrupt routing
[ 0.104529] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.109674] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.117087] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.125041] ACPI Warning: Incorrect checksum in table [OEMB] - 3C, should be 31 (20090903/tbutils-314)
[ 0.125127] ACPI: No dock devices found.
[ 0.125377] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.125617] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.125620] pci 0000:00:02.0: PME# disabled
[ 0.125650] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.125653] pci 0000:00:03.0: PME# disabled
[ 0.125684] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.125686] pci 0000:00:04.0: PME# disabled
[ 0.125870] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.125913] pci 0000:00:0a.1: reg 20 io port: [0x5000-0x503f]
[ 0.125919] pci 0000:00:0a.1: reg 24 io port: [0x6000-0x603f]
[ 0.125940] pci 0000:00:0a.1: PME# supported from D3hot D3cold
[ 0.125945] pci 0000:00:0a.1: PME# disabled
[ 0.125976] pci 0000:00:0b.0: reg 10 32bit mmio: [0xfaebe000-0xfaebefff]
[ 0.125999] pci 0000:00:0b.0: supports D1 D2
[ 0.126001] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.126004] pci 0000:00:0b.0: PME# disabled
[ 0.126029] pci 0000:00:0b.1: reg 10 32bit mmio: [0xfaebfc00-0xfaebfcff]
[ 0.126054] pci 0000:00:0b.1: supports D1 D2
[ 0.126056] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.126059] pci 0000:00:0b.1: PME# disabled
[ 0.126093] pci 0000:00:0d.0: reg 20 io port: [0xffa0-0xffaf]
[ 0.126129] pci 0000:00:0e.0: reg 10 io port: [0xc800-0xc807]
[ 0.126134] pci 0000:00:0e.0: reg 14 io port: [0xc480-0xc483]
[ 0.126138] pci 0000:00:0e.0: reg 18 io port: [0xc400-0xc407]
[ 0.126142] pci 0000:00:0e.0: reg 1c io port: [0xc080-0xc083]
[ 0.126146] pci 0000:00:0e.0: reg 20 io port: [0xc000-0xc00f]
[ 0.126150] pci 0000:00:0e.0: reg 24 32bit mmio: [0xfaebd000-0xfaebdfff]
[ 0.126191] pci 0000:00:0f.0: reg 10 io port: [0xbc00-0xbc07]
[ 0.126195] pci 0000:00:0f.0: reg 14 io port: [0xb880-0xb883]
[ 0.126199] pci 0000:00:0f.0: reg 18 io port: [0xb800-0xb807]
[ 0.126204] pci 0000:00:0f.0: reg 1c io port: [0xb480-0xb483]
[ 0.126208] pci 0000:00:0f.0: reg 20 io port: [0xb400-0xb40f]
[ 0.126212] pci 0000:00:0f.0: reg 24 32bit mmio: [0xfaebc000-0xfaebcfff]
[ 0.126287] pci 0000:00:10.1: reg 10 32bit mmio: [0xfaeb8000-0xfaebbfff]
[ 0.126315] pci 0000:00:10.1: PME# supported from D3hot D3cold
[ 0.126318] pci 0000:00:10.1: PME# disabled
[ 0.126350] pci 0000:00:14.0: reg 10 32bit mmio: [0xfaeb7000-0xfaeb7fff]
[ 0.126354] pci 0000:00:14.0: reg 14 io port: [0xb080-0xb087]
[ 0.126373] pci 0000:00:14.0: supports D1 D2
[ 0.126375] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.126378] pci 0000:00:14.0: PME# disabled
[ 0.126544] pci 0000:03:00.0: reg 10 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.126551] pci 0000:03:00.0: reg 18 64bit mmio: [0xfafe0000-0xfafeffff]
[ 0.126555] pci 0000:03:00.0: reg 20 io port: [0xd000-0xd0ff]
[ 0.126562] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfafc0000-0xfafdffff]
[ 0.126575] pci 0000:03:00.0: supports D1 D2
[ 0.126600] pci 0000:03:00.1: reg 10 64bit mmio: [0xfaffc000-0xfaffffff]
[ 0.126623] pci 0000:03:00.1: supports D1 D2
[ 0.132053] pci 0000:00:04.0: bridge io port: [0xd000-0xdfff]
[ 0.132055] pci 0000:00:04.0: bridge 32bit mmio: [0xfaf00000-0xfaffffff]
[ 0.132059] pci 0000:00:04.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.132096] pci 0000:04:07.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff]
[ 0.132154] pci 0000:04:07.1: reg 10 32bit mmio: [0xfc000000-0xfcffffff]
[ 0.132206] pci 0000:04:07.2: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
[ 0.132271] pci 0000:04:08.0: reg 10 32bit mmio: [0xfebff800-0xfebfffff]
[ 0.132276] pci 0000:04:08.0: reg 14 io port: [0xec00-0xec7f]
[ 0.132306] pci 0000:04:08.0: supports D2
[ 0.132308] pci 0000:04:08.0: PME# supported from D2 D3hot D3cold
[ 0.132311] pci 0000:04:08.0: PME# disabled
[ 0.132341] pci 0000:00:10.0: transparent bridge
[ 0.132344] pci 0000:00:10.0: bridge io port: [0xe000-0xefff]
[ 0.132347] pci 0000:00:10.0: bridge 32bit mmio: [0xfb000000-0xfebfffff]
[ 0.132358] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.132540] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.132596] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.132655] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
[ 0.132738] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.142843] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *10
[ 0.143023] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 0.143201] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[ 0.143378] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *10
[ 0.143554] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *10
[ 0.143731] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *11
[ 0.143908] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[ 0.144076] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
[ 0.144254] ACPI: PCI Interrupt Link [LUB0] (IRQs 21) *10
[ 0.144430] ACPI: PCI Interrupt Link [LUB2] (IRQs 23) *7
[ 0.144606] ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *10
[ 0.144790] ACPI: PCI Interrupt Link [LAZA] (IRQs 22) *11
[ 0.144966] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
[ 0.145143] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
[ 0.145320] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *5
[ 0.145503] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *11
[ 0.145685] ACPI: PCI Interrupt Link [LSA0] (IRQs 22) *7
[ 0.145862] ACPI: PCI Interrupt Link [LSA1] (IRQs 23) *7
[ 0.146068] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.146190] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.146194] vgaarb: loaded
[ 0.146283] PCI: Using ACPI for IRQ routing
[ 0.146446] Switching to clocksource tsc
[ 0.147547] pnp: PnP ACPI init
[ 0.147568] ACPI: bus type pnp registered
[ 0.150182] pnp: PnP ACPI: found 16 devices
[ 0.150184] ACPI: ACPI bus type pnp unregistered
[ 0.150197] system 00:08: iomem range 0xfefe0000-0xfefe01ff has been reserved
[ 0.150202] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[ 0.150205] system 00:09: ioport range 0x800-0x80f has been reserved
[ 0.150208] system 00:09: ioport range 0x4000-0x407f has been reserved
[ 0.150211] system 00:09: ioport range 0x4080-0x40ff has been reserved
[ 0.150213] system 00:09: ioport range 0x4400-0x447f has been reserved
[ 0.150216] system 00:09: ioport range 0x4480-0x44ff has been reserved
[ 0.150219] system 00:09: ioport range 0x4800-0x487f has been reserved
[ 0.150222] system 00:09: ioport range 0x4880-0x48ff has been reserved
[ 0.150225] system 00:09: ioport range 0x2000-0x207f has been reserved
[ 0.150227] system 00:09: ioport range 0x2080-0x20ff has been reserved
[ 0.150230] system 00:09: iomem range 0xfaec0000-0xfaefffff has been reserved
[ 0.150233] system 00:09: iomem range 0xffb80000-0xffbfffff has been reserved
[ 0.150236] system 00:09: iomem range 0xfee01000-0xfeefffff has been reserved
[ 0.150241] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.150244] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.150249] system 00:0d: ioport range 0xa00-0xa0f has been reserved
[ 0.150252] system 00:0d: ioport range 0xa10-0xa1f has been reserved
[ 0.150256] system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.150261] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[ 0.150264] system 00:0f: iomem range 0xc0000-0xcffff has been reserved
[ 0.150267] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
[ 0.150270] system 00:0f: iomem range 0x100000-0x5fffffff could not be reserved
[ 0.150273] system 00:0f: iomem range 0xfec00000-0xffffffff could not be reserved
[ 0.155019] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
[ 0.155022] pci 0000:00:02.0: IO window: disabled
[ 0.155024] pci 0000:00:02.0: MEM window: disabled
[ 0.155026] pci 0000:00:02.0: PREFETCH window: disabled
[ 0.155029] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
[ 0.155031] pci 0000:00:03.0: IO window: disabled
[ 0.155033] pci 0000:00:03.0: MEM window: disabled
[ 0.155035] pci 0000:00:03.0: PREFETCH window: disabled
[ 0.155039] pci 0000:00:04.0: PCI bridge, secondary bus 0000:03
[ 0.155041] pci 0000:00:04.0: IO window: 0xd000-0xdfff
[ 0.155044] pci 0000:00:04.0: MEM window: 0xfaf00000-0xfaffffff
[ 0.155047] pci 0000:00:04.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.155051] pci 0000:00:10.0: PCI bridge, secondary bus 0000:04
[ 0.155053] pci 0000:00:10.0: IO window: 0xe000-0xefff
[ 0.155056] pci 0000:00:10.0: MEM window: 0xfb000000-0xfebfffff
[ 0.155059] pci 0000:00:10.0: PREFETCH window: disabled
[ 0.155068] pci 0000:00:02.0: setting latency timer to 64
[ 0.155072] pci 0000:00:03.0: setting latency timer to 64
[ 0.155076] pci 0000:00:04.0: setting latency timer to 64
[ 0.155080] pci 0000:00:10.0: setting latency timer to 64
[ 0.155084] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.155086] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.155089] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff]
[ 0.155092] pci_bus 0000:03: resource 1 mem: [0xfaf00000-0xfaffffff]
[ 0.155094] pci_bus 0000:03: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.155097] pci_bus 0000:04: resource 0 io: [0xe000-0xefff]
[ 0.155099] pci_bus 0000:04: resource 1 mem: [0xfb000000-0xfebfffff]
[ 0.155101] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 0.155104] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.155140] NET: Registered protocol family 2
[ 0.155265] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.156269] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.159734] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.160567] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.160571] TCP reno registered
[ 0.160676] NET: Registered protocol family 1
[ 0.160726] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.160744] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.160763] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.595403] pci 0000:00:09.0: Found enabled HT MSI Mapping
[ 0.595451] pci 0000:00:09.0: Found enabled HT MSI Mapping
[ 0.595500] pci 0000:00:09.0: Found enabled HT MSI Mapping
[ 0.595552] pci 0000:00:09.0: Found enabled HT MSI Mapping
[ 0.595567] pci 0000:03:00.0: Boot video device
[ 0.595624] Unpacking initramfs...
[ 0.826511] Freeing initrd memory: 9951k freed
[ 0.835346] audit: initializing netlink socket (disabled)
[ 0.835359] type=2000 audit(1270726725.832:1): initialized
[ 0.835548] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.836891] VFS: Disk quotas dquot_6.5.2
[ 0.836945] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.837021] msgmni has been set to 3012
[ 0.837190] alg: No test for stdrng (krng)
[ 0.837240] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.837243] io scheduler noop registered
[ 0.837244] io scheduler anticipatory registered
[ 0.837246] io scheduler deadline registered
[ 0.837276] io scheduler cfq registered (default)
[ 0.837409] alloc irq_desc for 24 on node 0
[ 0.837411] alloc kstat_irqs on node 0
[ 0.837421] pcieport 0000:00:02.0: irq 24 for MSI/MSI-X
[ 0.837425] pcieport 0000:00:02.0: setting latency timer to 64
[ 0.837506] alloc irq_desc for 25 on node 0
[ 0.837508] alloc kstat_irqs on node 0
[ 0.837512] pcieport 0000:00:03.0: irq 25 for MSI/MSI-X
[ 0.837515] pcieport 0000:00:03.0: setting latency timer to 64
[ 0.837587] alloc irq_desc for 26 on node 0
[ 0.837589] alloc kstat_irqs on node 0
[ 0.837593] pcieport 0000:00:04.0: irq 26 for MSI/MSI-X
[ 0.837596] pcieport 0000:00:04.0: setting latency timer to 64
[ 0.838913] Linux agpgart interface v0.103
[ 0.838916] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.839020] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.839117] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.839334] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.839516] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.839567] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.842219] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.842224] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.842328] mice: PS/2 mouse device common for all mice
[ 0.842376] rtc_cmos 00:02: RTC can wake from S4
[ 0.842414] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.842446] rtc0: alarms up to one year, y3k, 114 bytes nvram
[ 0.842457] cpuidle: using governor ladder
[ 0.842459] cpuidle: using governor menu
[ 0.842464] No iBFT detected.
[ 0.842805] TCP cubic registered
[ 0.842918] NET: Registered protocol family 10
[ 0.843403] lo: Disabled Privacy Extensions
[ 0.843695] Mobile IPv6
[ 0.843697] NET: Registered protocol family 17
[ 0.843775] PM: Resume from disk failed.
[ 0.843781] registered taskstats version 1
[ 0.844149] rtc_cmos 00:02: setting system clock to 2010-04-08 11:38:46 UTC (1270726726)
[ 0.844201] Freeing unused kernel memory: 580k freed
[ 0.844587] Write protecting the kernel read-only data: 4144k
[ 0.950353] ACPI Warning for \_TZ_.THRM._TZD: Return Package type mismatch at index 0 - found Processor, expected Reference (20090903/nspredef-1012)
[ 0.950362] ACPI: Expecting a [Reference] package element, found type C
[ 0.950522] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.950530] ACPI: Thermal Zone [THRM] (80 C)
[ 1.110916] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.111247] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
[ 1.111253] alloc irq_desc for 20 on node 0
[ 1.111255] alloc kstat_irqs on node 0
[ 1.111268] forcedeth 0000:00:14.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, low) -> IRQ 20
[ 1.111272] forcedeth 0000:00:14.0: setting latency timer to 64
[ 1.111325] nv_probe: set workaround bit for reversed mac addr
[ 1.171033] SCSI subsystem initialized
[ 1.176029] Uniform Multi-Platform E-IDE driver
[ 1.186537] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 1.186546] ACPI: Power Button [PWRB]
[ 1.186665] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.186668] ACPI: Power Button [PWRF]
[ 1.205765] Floppy drive(s): fd0 is 1.44M
[ 1.208255] usbcore: registered new interface driver usbfs
[ 1.208331] usbcore: registered new interface driver hub
[ 1.208420] usbcore: registered new device driver usb
[ 1.213319] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.215133] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19
[ 1.215140] alloc irq_desc for 19 on node 0
[ 1.215142] alloc kstat_irqs on node 0
[ 1.215154] firewire_ohci 0000:04:08.0: PCI INT A -> Link[LNKA] -> GSI 19 (level, low) -> IRQ 19
[ 1.215216] libata version 3.00 loaded.
[ 1.225523] FDC 0 is a post-1991 82077
[ 1.286159] firewire_ohci: Added fw-ohci device 0000:04:08.0, OHCI version 1.10
[ 1.519132] firewire_core: created device fw0: GUID 88aa99bbddee7766, S400
[ 1.533854] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x1c1 @ 1, addr 66:77:44:22:33:11
[ 1.533858] forcedeth 0000:00:14.0: highdma pwrctl gbit lnktim desc-v3
[ 1.534365] amd74xx 0000:00:0d.0: UDMA133 controller
[ 1.534369] amd74xx 0000:00:0d.0: IDE controller (0x10de:0x0265 rev 0xa1)
[ 1.534409] amd74xx 0000:00:0d.0: not 100% native mode: will probe irqs later
[ 1.534414] ide0: BM-DMA at 0xffa0-0xffa7
[ 1.534420] ide1: BM-DMA at 0xffa8-0xffaf
[ 1.534426] Probing IDE interface ide0...
[ 2.100098] Probing IDE interface ide1...
[ 3.172021] hdd: HL-DT-ST DVDRAM GSA-H10N, ATAPI CD/DVD-ROM drive
[ 3.172070] hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 3.172808] hdd: UDMA/33 mode selected
[ 3.173303] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 3.173367] ide1 at 0x170-0x177,0x376 on irq 15
[ 3.178471] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
[ 3.178477] alloc irq_desc for 23 on node 0
[ 3.178479] alloc kstat_irqs on node 0
[ 3.178491] ehci_hcd 0000:00:0b.1: PCI INT B -> Link[LUB2] -> GSI 23 (level, low) -> IRQ 23
[ 3.178511] ehci_hcd 0000:00:0b.1: setting latency timer to 64
[ 3.178514] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[ 3.178547] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
[ 3.178578] ehci_hcd 0000:00:0b.1: debug port 1
[ 3.178585] ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported
[ 3.178608] ehci_hcd 0000:00:0b.1: irq 23, io mem 0xfaebfc00
[ 3.188021] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00
[ 3.188052] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.188055] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.188057] usb usb1: Product: EHCI Host Controller
[ 3.188059] usb usb1: Manufacturer: Linux 2.6.32-3-amd64 ehci_hcd
[ 3.188061] usb usb1: SerialNumber: 0000:00:0b.1
[ 3.188193] usb usb1: configuration #1 chosen from 1 choice
[ 3.188245] hub 1-0:1.0: USB hub found
[ 3.188254] hub 1-0:1.0: 8 ports detected
[ 3.189966] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.190659] sata_nv 0000:00:0e.0: version 3.5
[ 3.190978] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 22
[ 3.190986] alloc irq_desc for 22 on node 0
[ 3.190988] alloc kstat_irqs on node 0
[ 3.191000] sata_nv 0000:00:0e.0: PCI INT A -> Link[LSA0] -> GSI 22 (level, low) -> IRQ 22
[ 3.191003] sata_nv 0000:00:0e.0: Using SWNCQ mode
[ 3.191063] sata_nv 0000:00:0e.0: setting latency timer to 64
[ 3.192562] scsi0 : sata_nv
[ 3.194216] scsi1 : sata_nv
[ 3.194461] ata1: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc000 irq 22
[ 3.194464] ata2: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xc008 irq 22
[ 3.194836] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 21
[ 3.194842] alloc irq_desc for 21 on node 0
[ 3.194844] alloc kstat_irqs on node 0
[ 3.194856] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[LUB0] -> GSI 21 (level, low) -> IRQ 21
[ 3.194880] ohci_hcd 0000:00:0b.0: setting latency timer to 64
[ 3.194883] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[ 3.194900] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
[ 3.194935] ohci_hcd 0000:00:0b.0: irq 21, io mem 0xfaebe000
[ 3.250239] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.250242] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.250244] usb usb2: Product: OHCI Host Controller
[ 3.250246] usb usb2: Manufacturer: Linux 2.6.32-3-amd64 ohci_hcd
[ 3.250248] usb usb2: SerialNumber: 0000:00:0b.0
[ 3.250395] usb usb2: configuration #1 chosen from 1 choice
[ 3.250444] hub 2-0:1.0: USB hub found
[ 3.250455] hub 2-0:1.0: 8 ports detected
[ 3.250977] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 23
[ 3.250983] sata_nv 0000:00:0f.0: PCI INT A -> Link[LSA1] -> GSI 23 (level, low) -> IRQ 23
[ 3.250986] sata_nv 0000:00:0f.0: Using SWNCQ mode
[ 3.251044] sata_nv 0000:00:0f.0: setting latency timer to 64
[ 3.251168] scsi2 : sata_nv
[ 3.251296] scsi3 : sata_nv
[ 3.251434] ata3: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 23
[ 3.251437] ata4: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 23
[ 3.500042] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 3.633678] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
[ 3.633681] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.633683] usb 1-2: Product: USB2.0 Hub
[ 3.634030] usb 1-2: configuration #1 chosen from 1 choice
[ 3.634361] hub 1-2:1.0: USB hub found
[ 3.634687] hub 1-2:1.0: 4 ports detected
[ 3.660053] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.668378] ata1.00: ATA-8: Hitachi HDT721010SLA360, ST6OA3AA, max UDMA/133
[ 3.668381] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 3.684380] ata1.00: configured for UDMA/133
[ 3.684485] scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72101 ST6O PQ: 0 ANSI: 5
[ 3.716079] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.740260] ata3.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7
[ 3.740263] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 3.748313] ata3.00: configured for UDMA/133
[ 3.860023] usb 1-4: new high speed USB device using ehci_hcd and address 4
[ 3.993228] usb 1-4: New USB device found, idVendor=0409, idProduct=005a
[ 3.993231] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.993605] usb 1-4: configuration #1 chosen from 1 choice
[ 3.993775] hub 1-4:1.0: USB hub found
[ 3.993854] hub 1-4:1.0: 2 ports detected
[ 4.152109] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.160263] ata2.00: ATA-7: SAMSUNG HD502IJ, 1AA01113, max UDMA7
[ 4.160266] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 4.168285] ata2.00: configured for UDMA/133
[ 4.168382] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5
[ 4.168659] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
[ 4.296167] usb 2-3: new full speed USB device using ohci_hcd and address 2
[ 4.490418] ata4: SATA link down (SStatus 0 SControl 300)
[ 4.509229] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 4.509264] sd 0:0:0:0: [sda] Write Protect is off
[ 4.509267] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.509284] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.509394] sda:
[ 4.509540] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 4.509571] sd 1:0:0:0: [sdb] Write Protect is off
[ 4.509573] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.509589] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.509673] sdb:
[ 4.509791] sd 2:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 4.509822] sd 2:0:0:0: [sdc] Write Protect is off
[ 4.509824] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 4.509840] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.509920] sdc:
[ 4.510159] ide-cd driver 5.00
[ 4.512357] ide-cd: hdd: ATAPI 48X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
[ 4.512361] Uniform CD-ROM driver Revision: 3.20
[ 4.515158] usb 2-3: New USB device found, idVendor=0403, idProduct=6001
[ 4.515161] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.515163] usb 2-3: Product: usb serial converter
[ 4.515165] usb 2-3: Manufacturer: ftdi
[ 4.515167] usb 2-3: SerialNumber: ftDD6XRV
[ 4.515242] usb 2-3: configuration #1 chosen from 1 choice
[ 4.518709] sdb1
[ 4.518995] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 4.521542] sda1 sda2
[ 4.521820] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.586869] sdc1
[ 4.587245] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 4.596532] usb 1-2.2: new full speed USB device using ehci_hcd and address 5
[ 4.691740] usb 1-2.2: New USB device found, idVendor=0c4b, idProduct=0300
[ 4.691744] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.691747] usb 1-2.2: Product: cyberJack pinpad(a)
[ 4.691748] usb 1-2.2: Manufacturer: Reiner-SCT
[ 4.691750] usb 1-2.2: SerialNumber: 3653657864
[ 4.691838] usb 1-2.2: configuration #1 chosen from 1 choice
[ 4.727644] device-mapper: uevent: version 1.0.3
[ 4.727988] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 4.765172] usb 1-2.3: new high speed USB device using ehci_hcd and address 6
[ 4.857656] usb 1-2.3: New USB device found, idVendor=05e3, idProduct=0608
[ 4.857660] usb 1-2.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.857663] usb 1-2.3: Product: USB2.0 Hub
[ 4.857770] usb 1-2.3: configuration #1 chosen from 1 choice
[ 4.858162] hub 1-2.3:1.0: USB hub found
[ 4.858528] hub 1-2.3:1.0: 4 ports detected
[ 4.917412] PM: Starting manual resume from disk
[ 4.917416] PM: Resume from partition 254:1
[ 4.917418] PM: Checking hibernation image.
[ 4.917633] PM: Error -22 checking image file
[ 4.917634] PM: Resume from disk failed.
[ 4.948776] usb 1-4.2: new low speed USB device using ehci_hcd and address 7
[ 4.974340] kjournald starting. Commit interval 5 seconds
[ 4.974350] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.060829] usb 1-4.2: New USB device found, idVendor=045e, idProduct=0047
[ 5.060833] usb 1-4.2: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 5.060836] usb 1-4.2: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
[ 5.060838] usb 1-4.2: Manufacturer: Microsoft
[ 5.060942] usb 1-4.2: configuration #1 chosen from 1 choice
[ 5.136645] usb 1-2.3.1: new full speed USB device using ehci_hcd and address 8
[ 5.233263] usb 1-2.3.1: New USB device found, idVendor=0619, idProduct=0501
[ 5.233267] usb 1-2.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.233270] usb 1-2.3.1: Product: SII Smart Label Printer 440
[ 5.233272] usb 1-2.3.1: Manufacturer: Seiko Instruments Inc.
[ 5.233274] usb 1-2.3.1: SerialNumber: 7BA00272
[ 5.233369] usb 1-2.3.1: configuration #1 chosen from 1 choice
[ 5.304309] usb 1-2.3.2: new low speed USB device using ehci_hcd and address 9
[ 5.399802] usb 1-2.3.2: New USB device found, idVendor=046a, idProduct=0011
[ 5.399806] usb 1-2.3.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.399905] usb 1-2.3.2: configuration #1 chosen from 1 choice
[ 6.622134] udev: starting version 151
[ 7.833157] usbcore: registered new interface driver usbserial
[ 7.833295] USB Serial support registered for generic
[ 7.833449] usbcore: registered new interface driver usbserial_generic
[ 7.833451] usbserial: USB Serial Driver core
[ 7.956719] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 7.961980] USB Serial support registered for FTDI USB Serial Device
[ 7.962138] ftdi_sio 2-3:1.0: FTDI USB Serial Device converter detected
[ 7.962189] usb 2-3: Detected FT232BM
[ 7.962191] usb 2-3: Number of endpoints 2
[ 7.962193] usb 2-3: Endpoint 1 MaxPacketSize 64
[ 7.962194] usb 2-3: Endpoint 2 MaxPacketSize 64
[ 7.962196] usb 2-3: Setting MaxPacketSize 64
[ 7.965904] usb 2-3: FTDI USB Serial Device converter now attached to ttyUSB0
[ 7.965958] usbcore: registered new interface driver ftdi_sio
[ 7.965960] ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver
[ 7.970834] usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x0619 pid 0x0501
[ 7.970858] usbcore: registered new interface driver usblp
[ 7.972850] processor LNXCPU:00: registered as cooling_device0
[ 7.987684] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 8.169506] EDAC MC: Ver: 2.1.0 Feb 24 2010
[ 8.183418] usbcore: registered new interface driver hiddev
[ 8.186863] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:0b.1/usb1/1-4/1-4.2/1-4.2:1.0/input/input4
[ 8.187947] generic-usb 0003:045E:0047.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:0b.1-4.2/input0
[ 8.191659] input: HID 046a:0011 as /devices/pci0000:00/0000:00:0b.1/usb1/1-2/1-2.3/1-2.3.2/1-2.3.2:1.0/input/input5
[ 8.191757] generic-usb 0003:046A:0011.0002: input,hidraw1: USB HID v1.10 Keyboard [HID 046a:0011] on usb-0000:00:0b.1-2.3.2/input0
[ 8.191785] usbcore: registered new interface driver usbhid
[ 8.191788] usbhid: v2.6:USB HID core driver
[ 8.228943] EDAC amd64_edac: Ver: 3.2.0 Feb 24 2010
[ 8.229205] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
[ 8.229210] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 8.229212] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 8.229213] (Note that use of the override may cause unknown side effects.)
[ 8.229229] amd64_edac: probe of 0000:00:18.2 failed with error -22
[ 8.393932] i2c i2c-0: nForce2 SMBus adapter at 0x5000
[ 8.393975] i2c i2c-1: nForce2 SMBus adapter at 0x6000
[ 8.479991] Linux video capture interface: v2.00
[ 8.602727] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.7 loaded
[ 8.603788] cx88/0: cx2388x v4l2 driver version 0.0.7 loaded
[ 8.612541] cx88[0]: subsystem: 0070:9601, board: Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56,autodetected], frontend(s): 1
[ 8.612545] cx88[0]: TV tuner type 63, Radio tuner type -1
[ 8.707563] cx2388x alsa driver version 0.0.7 loaded
[ 8.734850] cx88[0]: i2c init: enabling analog demod on HVR1300/3000/4000 tuner
[ 8.819173] tuner 2-0043: chip found @ 0x86 (cx88[0])
[ 8.828387] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[ 8.828394] HDA Intel 0000:00:10.1: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22
[ 8.828438] HDA Intel 0000:00:10.1: setting latency timer to 64
[ 8.829398] tda9887 2-0043: creating new instance
[ 8.829401] tda9887 2-0043: tda988[5/6/7] found
[ 8.833891] tuner 2-0061: chip found @ 0xc2 (cx88[0])
[ 8.872173] tveeprom 2-0050: Hauppauge model 96019, rev D6D3, serial# 5412725
[ 8.872176] tveeprom 2-0050: MAC address is 00-0D-FE-52-97-75
[ 8.872179] tveeprom 2-0050: tuner model is Philips FMD1216MEX (idx 133, type 78)
[ 8.872182] tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
[ 8.872185] tveeprom 2-0050: audio processor is CX882 (idx 33)
[ 8.872187] tveeprom 2-0050: decoder processor is CX882 (idx 25)
[ 8.872189] tveeprom 2-0050: has radio, has IR receiver, has IR transmitter
[ 8.872191] cx88[0]: hauppauge eeprom: model=96019
[ 8.876586] tuner-simple 2-0061: creating new instance
[ 8.876591] tuner-simple 2-0061: type set to 78 (Philips FMD1216MEX MK3 Hybrid Tuner)
[ 8.880732] cx88[0]/2: cx2388x 8802 Driver Manager
[ 8.881052] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 18
[ 8.881058] alloc irq_desc for 18 on node 0
[ 8.881060] alloc kstat_irqs on node 0
[ 8.881072] cx88-mpeg driver manager 0000:04:07.2: PCI INT A -> Link[LNKD] -> GSI 18 (level, low) -> IRQ 18
[ 8.881080] cx88[0]/2: found at 0000:04:07.2, rev: 5, irq: 18, latency: 64, mmio: 0xfd000000
[ 8.881086] IRQ 18/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 8.882564] cx8800 0000:04:07.0: PCI INT A -> Link[LNKD] -> GSI 18 (level, low) -> IRQ 18
[ 8.882574] cx88[0]/0: found at 0000:04:07.0, rev: 5, irq: 18, latency: 64, mmio: 0xfb000000
[ 8.882588] IRQ 18/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 8.903568] wm8775 2-001b: chip found @ 0x36 (cx88[0])
[ 8.917221] cx88[0]/0: registered device video0 [v4l2]
[ 8.917275] cx88[0]/0: registered device vbi0
[ 8.917317] cx88[0]/0: registered device radio0
[ 8.925975] cx88_audio 0000:04:07.1: PCI INT A -> Link[LNKD] -> GSI 18 (level, low) -> IRQ 18
[ 8.925986] IRQ 18/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 8.926011] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
[ 8.933846] cx88/2: cx2388x dvb driver version 0.0.7 loaded
[ 8.933850] cx88/2: registering cx8802 driver, type: dvb access: shared
[ 8.933854] cx88[0]/2: subsystem: 0070:9601, board: Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56]
[ 8.933857] cx88[0]/2: cx2388x based DVB/ATSC card
[ 8.933859] cx8802_alloc_frontends() allocating 1 frontend(s)
[ 8.977506] tuner-simple 2-0061: attaching existing instance
[ 8.977511] tuner-simple 2-0061: couldn't set type to 63. Using 78 (Philips FMD1216MEX MK3 Hybrid Tuner) instead
[ 8.979786] DVB: registering new adapter (cx88[0])
[ 8.979790] DVB: registering adapter 0 frontend 0 (Conexant CX22702 DVB-T)...
[ 9.087076] cx2388x blackbird driver version 0.0.7 loaded
[ 9.087080] cx88/2: registering cx8802 driver, type: blackbird access: shared
[ 9.087084] cx88[0]/2: subsystem: 0070:9601, board: Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56]
[ 9.087088] cx88[0]/2: cx23416 based mpeg encoder (blackbird reference design)
[ 9.087307] cx88[0]/2-bb: Firmware and/or mailbox pointer not initialized or corrupted
[ 9.092112] cx88-mpeg driver manager 0000:04:07.2: firmware: requesting v4l-cx2341x-enc.fw
[ 11.616232] cx88[0]/2-bb: Firmware upload successful.
[ 11.625733] cx88[0]/2-bb: Firmware version is 0x02060039
[ 11.632995] cx88[0]/2: registered device video1 [mpeg]
[ 11.848033] hda_codec: ALC883: BIOS auto-probing.
[ 12.160114] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:10.1/input/input6
[ 12.424692] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 17
[ 12.424698] alloc irq_desc for 17 on node 0
[ 12.424700] alloc kstat_irqs on node 0
[ 12.424712] HDA Intel 0000:03:00.1: PCI INT B -> Link[LNEB] -> GSI 17 (level, low) -> IRQ 17
[ 12.424774] HDA Intel 0000:03:00.1: setting latency timer to 64
[ 13.327803] EXT3 FS on dm-0, internal journal
[ 14.116880] kjournald starting. Commit interval 5 seconds
[ 14.117015] EXT3 FS on sda1, internal journal
[ 14.117019] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.138223] Adding 16777208k swap on /dev/mapper/lvm-swap. Priority:-1 extents:1 across:16777208k
[ 14.600528] loop: module loaded
[ 14.646836] [drm] Initialized drm 1.1.0 20060810
[ 14.677113] [drm] radeon kernel modesetting enabled.
[ 14.677527] ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 16
[ 14.677533] alloc irq_desc for 16 on node 0
[ 14.677535] alloc kstat_irqs on node 0
[ 14.677546] radeon 0000:03:00.0: PCI INT A -> Link[LNEA] -> GSI 16 (level, low) -> IRQ 16
[ 14.677551] radeon 0000:03:00.0: setting latency timer to 64
[ 14.681988] [drm] radeon: Initializing kernel modesetting.
[ 14.682037] [drm] register mmio base: 0xFAFE0000
[ 14.682039] [drm] register mmio size: 65536
[ 14.687324] ATOM BIOS: GV
[ 14.687330] [drm] Clocks initialized !
[ 14.687501] [drm] Detected VRAM RAM=256M, BAR=256M
[ 14.687504] [drm] RAM width 256bits DDR
[ 14.687585] [TTM] Zone kernel: Available graphics memory: 771614 kiB.
[ 14.687604] [drm] radeon: 256M of VRAM memory ready
[ 14.687606] [drm] radeon: 512M of GTT memory ready.
[ 14.687674] [drm] Loading RV770 CP Microcode
[ 14.688039] platform radeon_cp.0: firmware: requesting radeon/RV770_pfp.bin
[ 14.714566] platform radeon_cp.0: firmware: requesting radeon/RV770_me.bin
[ 14.722026] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 14.756742] [drm] ring test succeeded in 1 usecs
[ 14.756888] [drm] radeon: ib pool ready.
[ 14.756949] [drm] ib test succeeded in 0 usecs
[ 14.758670] [drm] Radeon Display Connectors
[ 14.758673] [drm] Connector 0:
[ 14.758674] [drm] HDMI-A
[ 14.758677] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[ 14.758679] [drm] Encoders:
[ 14.758680] [drm] DFP1: INTERNAL_UNIPHY
[ 14.758682] [drm] Connector 1:
[ 14.758683] [drm] VGA
[ 14.758685] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 14.758687] [drm] Encoders:
[ 14.758688] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 14.758690] [drm] Connector 2:
[ 14.758691] [drm] DVI-I
[ 14.758693] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[ 14.758695] [drm] Encoders:
[ 14.758696] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 14.758697] [drm] DFP2: INTERNAL_KLDSCP_LVTMA
[ 15.090796] [drm] fb mappable at 0xD0141000
[ 15.090798] [drm] vram apper at 0xD0000000
[ 15.090799] [drm] size 9216000
[ 15.090800] [drm] fb depth is 24
[ 15.090802] [drm] pitch is 7680
[ 15.094122] executing set pll
[ 15.100027] executing set crtc timing
[ 15.100057] [drm] TMDS-15: set mode 1920x1200 19
[ 15.117378] Console: switching to colour frame buffer device 240x75
[ 15.126576] fb0: radeondrmfb frame buffer device
[ 15.126577] registered panic notifier
[ 15.126583] [drm] Initialized radeon 2.0.0 20080528 for 0000:03:00.0 on minor 0
[ 15.149271] w83627ehf: Found W83627EHG chip at 0xa10
[ 16.460570] fuse init (API version 7.13)
[ 16.643436] w83627ehf w83627ehf.2576: fan1 low limit and alarm disabled
[ 16.643468] w83627ehf w83627ehf.2576: fan2 low limit and alarm disabled
[ 18.187547] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3800+ processors (1 cpu cores) (version 2.20.00)
[ 18.187596] powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0x8
[ 18.187599] powernow-k8: 1 : fid 0xe (2200 MHz), vid 0xa
[ 18.187601] powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xc
[ 18.187603] powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xe
[ 18.187605] powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12
[ 18.192361] Marking TSC unstable due to cpufreq changes
[ 18.192401] Switching to clocksource acpi_pm
[ 26.404028] eth0: no IPv6 routers present
[ 38.958617] lp: driver loaded but no devices found
[ 38.970584] ppdev: user-space parallel port driver
[ 42.112145] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
[ 42.116556] CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load
** Model information
sys_vendor: MSI
product_name: MS-7252
product_version: 1.0
chassis_vendor: To Be Filled By O.E.M.
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: V1.5
board_vendor: MSI
board_name: MS-7252
board_version: 1.0
** Loaded modules:
Module Size Used by
snd_seq_dummy 1343 0
ppdev 5030 0
lp 7462 0
parport 27938 2 ppdev,lp
powernow_k8 10930 0
cpufreq_conservative 5162 0
cpufreq_userspace 1992 0
cpufreq_stats 2659 0
cpufreq_powersave 902 0
binfmt_misc 6431 1
fuse 50110 1
w83627ehf 18659 0
hwmon_vid 1828 1 w83627ehf
radeon 449279 2
ttm 31500 1 radeon
drm_kms_helper 18899 1 radeon
drm 137190 4 radeon,ttm,drm_kms_helper
loop 11783 0
firewire_sbp2 11466 0
dm_crypt 10507 0
snd_hda_codec_atihdmi 2251 1
snd_hda_codec_realtek 235378 1
cx88_blackbird 13536 0
cx2341x 9441 1 cx88_blackbird
cx22702 4597 1
cx88_dvb 16516 0
cx88_vp3054_i2c 1636 1 cx88_dvb
videobuf_dvb 4114 1 cx88_dvb
dvb_core 74538 2 cx88_dvb,videobuf_dvb
wm8775 2987 1
tuner_simple 10790 2
tuner_types 10601 1 tuner_simple
tda9887 8157 1
snd_hda_intel 19619 3
tda8290 9177 0
snd_hda_codec 54212 3 snd_hda_codec_atihdmi,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 5364 1 snd_hda_codec
cx88_alsa 7843 1
snd_pcm_oss 32591 0
snd_mixer_oss 12606 1 snd_pcm_oss
snd_pcm 60615 4 snd_hda_intel,snd_hda_codec,cx88_alsa,snd_pcm_oss
snd_seq_midi 4400 0
cx8802 11125 2 cx88_blackbird,cx88_dvb
cx8800 24919 1 cx88_blackbird
snd_rawmidi 15483 1 snd_seq_midi
cx88xx 65048 5 cx88_blackbird,cx88_dvb,cx88_alsa,cx8802,cx8800
snd_seq_midi_event 4628 1 snd_seq_midi
tuner 16140 2
snd_seq 42801 4 snd_seq_dummy,snd_seq_midi,snd_seq_midi_event
snd_timer 15502 2 snd_pcm,snd_seq
v4l2_common 11720 6 cx88_blackbird,cx2341x,wm8775,cx8800,cx88xx,tuner
snd_seq_device 4477 4 snd_seq_dummy,snd_seq_midi,snd_rawmidi,snd_seq
ir_common 24271 1 cx88xx
videodev 29977 6 cx88_blackbird,wm8775,cx8800,cx88xx,tuner,v4l2_common
i2c_algo_bit 4225 3 radeon,cx88_vp3054_i2c,cx88xx
v4l1_compat 11442 1 videodev
v4l2_compat_ioctl32 8538 1 videodev
i2c_nforce2 5280 0
tveeprom 12057 1 cx88xx
snd 46350 21 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,cx88_alsa,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
videobuf_dma_sg 8403 6 cx88_blackbird,cx88_dvb,cx88_alsa,cx8802,cx8800,cx88xx
usbhid 33132 0
soundcore 4598 1 snd
btcx_risc 2899 4 cx88_alsa,cx8802,cx8800,cx88xx
videobuf_core 12196 6 cx88_blackbird,videobuf_dvb,cx8802,cx8800,cx88xx,videobuf_dma_sg
i2c_core 15584 16 radeon,drm,cx22702,cx88_vp3054_i2c,wm8775,tuner_simple,tda9887,tda8290,cx8800,cx88xx,tuner,v4l2_common,videodev,i2c_algo_bit,i2c_nforce2,tveeprom
edac_core 29245 0
psmouse 49505 0
k8temp 3139 0
usblp 9571 0
snd_page_alloc 6217 2 snd_hda_intel,snd_pcm
processor 30215 1 powernow_k8
hid 62825 1 usbhid
pcspkr 1699 0
serio_raw 3752 0
edac_mce_amd 6353 0
ftdi_sio 31468 1
usbserial 27351 3 ftdi_sio
evdev 7336 11
ext3 106486 2
jbd 37053 1 ext3
mbcache 4970 1 ext3
dm_mod 53674 9 dm_crypt
ide_cd_mod 24744 0
sd_mod 29689 7
crc_t10dif 1276 1 sd_mod
cdrom 29399 1 ide_cd_mod
ide_pci_generic 2788 0
ohci_hcd 19196 0
ata_generic 2983 0
sata_nv 19198 7
ehci_hcd 30706 0
firewire_ohci 19484 0
amd74xx 4476 0
libata 132183 2 ata_generic,sata_nv
floppy 49087 0
firewire_core 36688 2 firewire_sbp2,firewire_ohci
crc_itu_t 1307 1 firewire_core
button 4634 0
usbcore 121703 7 usbhid,usblp,ftdi_sio,usbserial,ohci_hcd,ehci_hcd
nls_base 6377 1 usbcore
ide_core 76850 3 ide_cd_mod,ide_pci_generic,amd74xx
scsi_mod 121925 3 firewire_sbp2,sd_mod,libata
forcedeth 45448 0
thermal 11674 0
fan 3346 0
thermal_sys 11878 3 processor,thermal,fan
** PCI devices:
00:00.0 RAM memory [0500]: nVidia Corporation C51 Host Bridge [10de:02f0] (rev a2)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7252]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:00.1 RAM memory [0500]: nVidia Corporation C51 Memory Controller 0 [10de:02fa] (rev a2)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7252]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:00.2 RAM memory [0500]: nVidia Corporation C51 Memory Controller 1 [10de:02fe] (rev a2)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7252]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:00.3 RAM memory [0500]: nVidia Corporation C51 Memory Controller 5 [10de:02f8] (rev a2)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7252]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:00.4 RAM memory [0500]: nVidia Corporation C51 Memory Controller 4 [10de:02f9] (rev a2)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7252]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.5 RAM memory [0500]: nVidia Corporation C51 Host Bridge [10de:02ff] (rev a2)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7252]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:00.6 RAM memory [0500]: nVidia Corporation C51 Memory Controller 3 [10de:027f] (rev a2)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7252]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:00.7 RAM memory [0500]: nVidia Corporation C51 Memory Controller 2 [10de:027e] (rev a2)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7252]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:02.0 PCI bridge [0604]: nVidia Corporation C51 PCI Express Bridge [10de:02fc] (rev a1) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:03.0 PCI bridge [0604]: nVidia Corporation C51 PCI Express Bridge [10de:02fd] (rev a1) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:04.0 PCI bridge [0604]: nVidia Corporation C51 PCI Express Bridge [10de:02fb] (rev a1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: faf00000-faffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:09.0 RAM memory [0500]: nVidia Corporation MCP51 Host Bridge [10de:0270] (rev a2)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7252]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:0a.0 ISA bridge [0601]: nVidia Corporation MCP51 LPC Bridge [10de:0260] (rev a3)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7252]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:0a.1 SMBus [0c05]: nVidia Corporation MCP51 SMBus [10de:0264] (rev a3)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7252]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 5
Region 4: I/O ports at 5000 [size=64]
Region 5: I/O ports at 6000 [size=64]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
00:0b.0 USB Controller [0c03]: nVidia Corporation MCP51 USB Controller [10de:026d] (rev a3) (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7252]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 21
Region 0: Memory at faebe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
00:0b.1 USB Controller [0c03]: nVidia Corporation MCP51 USB Controller [10de:026e] (rev a3) (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7252]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 23
Region 0: Memory at faebfc00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:0d.0 IDE interface [0101]: nVidia Corporation MCP51 IDE [10de:0265] (rev a1) (prog-if 8a [Master SecP PriP])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7252]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at ffa0 [size=16]
Capabilities: <access denied>
Kernel driver in use: AMD_IDE
00:0e.0 IDE interface [0101]: nVidia Corporation MCP51 Serial ATA Controller [10de:0266] (rev a1) (prog-if 85 [Master SecO PriO])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7252]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at c800 [size=8]
Region 1: I/O ports at c480 [size=4]
Region 2: I/O ports at c400 [size=8]
Region 3: I/O ports at c080 [size=4]
Region 4: I/O ports at c000 [size=16]
Region 5: Memory at faebd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
00:0f.0 IDE interface [0101]: nVidia Corporation MCP51 Serial ATA Controller [10de:0267] (rev a1) (prog-if 85 [Master SecO PriO])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7252]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at bc00 [size=8]
Region 1: I/O ports at b880 [size=4]
Region 2: I/O ports at b800 [size=8]
Region 3: I/O ports at b480 [size=4]
Region 4: I/O ports at b400 [size=16]
Region 5: Memory at faebc000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
00:10.0 PCI bridge [0604]: nVidia Corporation MCP51 PCI Bridge [10de:026f] (rev a2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=64
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fb000000-febfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR+
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:10.1 Audio device [0403]: nVidia Corporation MCP51 High Definition Audio [10de:026c] (rev a2)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7252]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin B routed to IRQ 22
Region 0: Memory at faeb8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:14.0 Bridge [0680]: nVidia Corporation MCP51 Ethernet Controller [10de:0269] (rev a3)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7252]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 20
Region 0: Memory at faeb7000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at b080 [size=8]
Capabilities: <access denied>
Kernel driver in use: forcedeth
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k8temp
03:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV770 [Radeon HD 4850] [1002:9442] (prog-if 00 [VGA controller])
Subsystem: Giga-byte Technology Device [1458:21c7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at fafe0000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at d000 [size=256]
Expansion ROM at fafc0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
03:00.1 Audio device [0403]: ATI Technologies Inc HD48x0 audio [1002:aa30]
Subsystem: Giga-byte Technology Device [1458:aa30]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at faffc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
04:07.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05)
Subsystem: Hauppauge computer works Inc. Device [0070:9601]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (5000ns min, 13750ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
Kernel driver in use: cx8800
04:07.1 Multimedia controller [0480]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] [14f1:8811] (rev 05)
Subsystem: Hauppauge computer works Inc. Device [0070:9601]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1000ns min, 63750ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
Kernel driver in use: cx88_audio
04:07.2 Multimedia controller [0480]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] [14f1:8802] (rev 05)
Subsystem: Hauppauge computer works Inc. Device [0070:9601]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1500ns min, 22000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
Kernel driver in use: cx88-mpeg driver manager
04:08.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev c0) (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:252d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at febff800 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at ec00 [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
** USB devices:
Bus 002 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 008: ID 0619:0501 Seiko Instruments, Inc.
Bus 001 Device 009: ID 046a:0011 Cherry GmbH G83 (RS 6000) Keyboard
Bus 001 Device 007: ID 045e:0047 Microsoft Corp. IntelliMouse Explorer 3.0
Bus 001 Device 006: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB [Hama]
Bus 001 Device 005: ID 0c4b:0300 Reiner SCT Kartensysteme GmbH cyberJack pinpad(a)
Bus 001 Device 004: ID 0409:005a NEC Corp. HighSpeed Hub
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB [Hama]
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'karmic'), (500, 'unstable'), (500, 'stable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-3-amd64 (SMP w/1 CPU core)
Locale: LANG=de_DE.utf8, LC_CTYPE=de_DE.utf8 (charmap=UTF-8) (ignored: LC_ALL set to de_DE.utf8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.32-3-amd64 depends on:
ii debconf [debconf-2.0] 1.5.28 Debian configuration management sy
ii initramfs-tools [linux-initr 0.93.4 tools for generating an initramfs
ii module-init-tools 3.12~pre2-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-3-amd64 recommends:
ii firmware-linux-f 2.6.33-1~experimental.4 Binary firmware for various driver
Versions of packages linux-image-2.6.32-3-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-3-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
ii firmware-linux-nonfree 0.23 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
-- debconf information:
linux-image-2.6.32-3-amd64/prerm/removing-running-kernel-2.6.32-3-amd64: true
linux-image-2.6.32-3-amd64/postinst/bootloader-test-error-2.6.32-3-amd64:
linux-image-2.6.32-3-amd64/prerm/would-invalidate-boot-loader-2.6.32-3-amd64: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-3-amd64/postinst/missing-firmware-2.6.32-3-amd64:
linux-image-2.6.32-3-amd64/postinst/depmod-error-initrd-2.6.32-3-amd64: false
linux-image-2.6.32-3-amd64/postinst/bootloader-error-2.6.32-3-amd64:
Reply to: