Your message dated Tue, 06 Apr 2010 05:23:31 +0100 with message-id <1270527811.24287.159.camel@localhost> and subject line Re: linux-image-2.6.32-trunk-686: address space collision has caused the Debian Bug report #567435, regarding linux-image-2.6.32-trunk-686: address space collision to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 567435: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=567435 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: linux-image-2.6.32-trunk-686: address space collision
- From: Alter Ego <alter_ego@vizzavi.pt>
- Date: Fri, 29 Jan 2010 03:10:56 +0000
- Message-id: <4B6251C0.6020809@vizzavi.pt>
Package: linux-2.6 Version: 2.6.32-5 Justification: breaks the whole system Severity: criticalAfter last "aptitude full-upgrade" the new kernel "linux-image-2.6.32-trunk-686" was installed on my Debian squeeze system.But every time I boot from the refered new kernel, I see the following error message at the very beginning of the boot process:"pci 0000:02:05.0: BAR 6: address space collision on of device [0xfeaa0000-0xfeabffff]"I also get that message by running the following command after booting: dmesg | grep -i collisionAfter showing that message, the system boots apparently normal and I'm able to graphically login via Gnome or LXDE.But, after using the system for some minutes (it varies... could be 10 m, 30 m...) the system hangs completely, to the point that I can't even kill X server (even via Ctrl+Alt+Backspace or Alt+SysRq+K) or start another TTY console.Also the "Num Lock" and "Caps Lock" lights on the keyboard start blinking.So the only option is to turn off the computer by pressing the button on the computer case!Note:I have 2 other computers, with different hardware (different graphics card, etc), but they are also running Debian Squeeze and with similar installation and configuration. On one of them I don't get this bug. On the other of them I get precisely this same bug.-- Package-specific info: ** Version:Linux version 2.6.32-trunk-686 (Debian 2.6.32-5) (ben@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sun Jan 10 06:32:16 UTC 2010** Command line: BOOT_IMAGE=//vmlinuz-2.6.32-trunk-686 root=/dev/mapper/hda2_crypt ro quiet ** Not tainted ** Kernel log: [ 3.432218] usb usb4: Product: UHCI Host Controller [ 3.432222] usb usb4: Manufacturer: Linux 2.6.32-trunk-686 uhci_hcd [ 3.432226] usb usb4: SerialNumber: 0000:00:1d.2 [ 3.432332] usb usb4: configuration #1 chosen from 1 choice [ 3.432383] hub 4-0:1.0: USB hub found [ 3.432397] hub 4-0:1.0: 2 ports detected[ 3.432473] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16[ 3.432482] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 3.432488] uhci_hcd 0000:00:1d.3: UHCI Host Controller[ 3.432505] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5[ 3.432531] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ef40 [ 3.432583] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001[ 3.432588] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 3.432593] usb usb5: Product: UHCI Host Controller [ 3.432597] usb usb5: Manufacturer: Linux 2.6.32-trunk-686 uhci_hcd [ 3.432601] usb usb5: SerialNumber: 0000:00:1d.3 [ 3.432721] usb usb5: configuration #1 chosen from 1 choice [ 3.432772] hub 5-0:1.0: USB hub found [ 3.432784] hub 5-0:1.0: 2 ports detected [ 3.462019] SCSI subsystem initialized [ 3.489580] libata version 3.00 loaded. [ 3.510229] ide-cd driver 5.00 [ 3.514448] ide-gd driver 1.18 [ 3.514499] hda: max request size: 512KiB[ 3.514926] hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=16383/255/63[ 3.515068] hda: cache flushes supported [ 3.515135] hda: [ 3.520090] ide-cd: hdc: ATAPI 48X DVD-ROM drive, 256kB Cache [ 3.520099] Uniform CD-ROM driver Revision: 3.20 [ 3.520281] hda1 hda2 hda3 [ 3.867258] device-mapper: uevent: version 1.0.3[ 3.867692] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com[ 21.534816] EXT4-fs (dm-0): mounted filesystem with ordered data mode [ 23.697805] udev: starting version 150 [ 24.315218] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 24.358559] processor LNXCPU:00: registered as cooling_device0 [ 24.359031] processor LNXCPU:01: registered as cooling_device1[ 24.439641] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 24.451810] input: GenPS/2 Genius Mouse as /devices/platform/i8042/serio1/input/input4[ 24.499201] parport_pc 00:0a: reported by Plug and Play ACPI[ 24.499316] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP][ 24.534474] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 24.537490] intel_rng: FWH not detected [ 24.604346] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4[ 25.416088] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17[ 25.416166] Intel ICH 0000:00:1f.5: setting latency timer to 64[ 25.744020] intel8x0_measure_ac97_clock: measured 54447 usecs (2624 samples)[ 25.744026] intel8x0: clocking to 48000 [ 27.392792] loop: module loaded [ 27.899877] EXT4-fs (hda1): mounted filesystem with ordered data mode[ 27.952783] Adding 1984016k swap on /dev/mapper/hda3_crypt. Priority:-1 extents:1 across:1984016k[ 28.453119] ip_tables: (C) 2000-2006 Netfilter Core Team [ 28.494326] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)[ 28.494970] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 28.494974] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or[ 28.494977] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 28.743346] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 30.338229] fuse init (API version 7.13) [ 37.359185] lp0: using parport0 (interrupt-driven). [ 37.365599] ppdev: user-space parallel port driver [ 40.638046] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 40.774419] [drm] Initialized drm 1.1.0 20060810 [ 40.852697] [drm] radeon defaulting to userspace modesetting.[ 40.853738] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0[ 41.146875] agpgart-intel 0000:00:00.0: AGP 3.0 bridge[ 41.146899] agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode[ 41.146942] pci 0000:01:00.0: putting AGP V3 device into 8x mode [ 41.412276] [drm] Setting GART location based on new memory map [ 41.412351] [drm] Loading R300 Microcode [ 41.412473] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin [ 41.466258] [drm] Num pipes: 1 [ 41.466270] [drm] writeback test succeeded in 1 usecs [ 42.424491] skge eth0: enabling interface [ 42.428429] ADDRCONF(NETDEV_UP): eth0: link is not ready[ 44.118966] skge eth0: Link is up at 100 Mbps, full duplex, flow control both[ 44.119133] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 54.812016] eth0: no IPv6 routers present[ 149.460018] usb 1-3: new high speed USB device using ehci_hcd and address 2[ 149.596250] usb 1-3: New USB device found, idVendor=0951, idProduct=1601[ 149.596256] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3[ 149.596259] usb 1-3: Product: DataTraveler II+ [ 149.596262] usb 1-3: Manufacturer: Kingston [ 149.596265] usb 1-3: SerialNumber: 5B690B87417A [ 149.596420] usb 1-3: configuration #1 chosen from 1 choice [ 149.680141] Initializing USB Mass Storage driver... [ 149.680279] scsi0 : SCSI emulation for USB Mass Storage devices [ 149.680510] usbcore: registered new interface driver usb-storage [ 149.680515] USB Mass Storage support registered. [ 149.681042] usb-storage: device found at 2 [ 149.681047] usb-storage: waiting for device to settle before scanning [ 154.680191] usb-storage: device scan complete[ 154.680663] scsi 0:0:0:0: Direct-Access Kingston DataTraveler II+ PMAP PQ: 0 ANSI: 0 CCS [ 155.131097] sd 0:0:0:0: [sda] 2030592 512-byte logical blocks: (1.03 GB/991 MiB)[ 155.131586] sd 0:0:0:0: [sda] Write Protect is off [ 155.131591] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00 [ 155.131594] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 155.133711] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 155.133718] sda: sda1 sda2 [ 155.136254] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 155.136260] sd 0:0:0:0: [sda] Attached SCSI removable disk ** Model information not available ** Loaded modules: Module Size Used by sd_mod 25717 0 crc_t10dif 1012 1 sd_mod usb_storage 29825 0 radeon 398255 2 ttm 26008 1 radeon drm_kms_helper 17183 1 radeon drm 107507 5 radeon,ttm,drm_kms_helper i2c_algo_bit 3497 1 radeon ppdev 4058 0 lp 5570 0 speedstep_lib 2468 0 cpufreq_conservative 4018 0 cpufreq_stats 1940 0 cpufreq_powersave 602 0 cpufreq_userspace 1444 0 fuse 43554 1 ipt_LOG 3570 3 xt_multiport 1775 2 xt_limit 1088 11 xt_state 927 34 xt_tcpudp 1743 35 ip6table_mangle 2559 0 ip6table_filter 1908 1 ip6_tables 8560 2 ip6table_mangle,ip6table_filter iptable_mangle 2325 0 iptable_nat 3519 0 iptable_filter 1790 1 nf_nat_ftp 1483 0 nf_nat_irc 970 0 nf_nat 10456 3 iptable_nat,nf_nat_ftp,nf_nat_irc nf_conntrack_ipv4 7597 37 iptable_nat,nf_nat nf_defrag_ipv4 779 1 nf_conntrack_ipv4 nf_conntrack_ftp 4260 1 nf_nat_ftp nf_conntrack_irc 2499 1 nf_nat_ircnf_conntrack 37775 8 xt_state,iptable_nat,nf_nat_ftp,nf_nat_irc,nf_nat,nf_conntrack_ipv4,nf_conntrack_ftp,nf_conntrack_ircip_tables 7690 3 iptable_mangle,iptable_nat,iptable_filterx_tables 8335 8 ipt_LOG,xt_multiport,xt_limit,xt_state,xt_tcpudp,ip6_tables,iptable_nat,ip_tablesloop 9721 0 firewire_sbp2 9575 0 snd_intel8x0 19523 1 snd_ac97_codec 79136 1 snd_intel8x0 ac97_bus 710 1 snd_ac97_codec snd_pcm_oss 28479 0 snd_mixer_oss 10461 1 snd_pcm_oss snd_pcm 47350 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss snd_seq_midi 3480 0 snd_rawmidi 12313 1 snd_seq_midi snd_seq_midi_event 3684 1 snd_seq_midi snd_seq 35303 2 snd_seq_midi,snd_seq_midi_event snd_timer 12258 2 snd_pcm,snd_seq shpchp 21220 0 snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq pci_hotplug 18065 1 shpchpsnd 33551 11 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_deviceparport_pc 15799 1 serio_raw 2916 0 rng_core 2178 0 parport 22554 3 ppdev,lp,parport_pc soundcore 3450 1 snd i2c_i801 6442 0 evdev 5609 10 processor 25803 0 pcspkr 1207 0 snd_page_alloc 4977 2 snd_intel8x0,snd_pcm i2c_core 12612 4 radeon,drm,i2c_algo_bit,i2c_i801 psmouse 44409 0 ext4 254301 2 mbcache 3762 1 ext4 jbd2 55835 1 ext4 crc16 1027 1 ext4 sha256_generic 10748 4 twofish 5665 4 twofish_common 12560 1 twofish cbc 2047 2 dm_crypt 9059 2 dm_mod 45854 5 dm_crypt ide_gd_mod 17103 4 ide_cd_mod 21044 0 cdrom 26487 1 ide_cd_mod ide_pci_generic 1924 0 ata_generic 2015 0 libata 113728 1 ata_generic scsi_mod 101073 4 sd_mod,usb_storage,firewire_sbp2,libata uhci_hcd 15953 0 intel_agp 20145 1 firewire_ohci 16477 0 piix 3564 3 ehci_hcd 27230 0 firewire_core 30915 2 firewire_sbp2,firewire_ohci crc_itu_t 1035 1 firewire_core skge 29398 0 floppy 40923 0 agpgart 19516 3 ttm,drm,intel_agp ide_core 63850 4 ide_gd_mod,ide_cd_mod,ide_pci_generic,piix usbcore 97930 4 usb_storage,uhci_hcd,ehci_hcd nls_base 4541 1 usbcore button 3598 0 thermal 9206 0 fan 2586 0 thermal_sys 9378 3 processor,thermal,fan ** PCI devices:00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface [8086:2570] (rev 02) Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard [1043:80f2] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-Latency: 0 Region 0: Memory at fc000000 (32-bit, prefetchable) [size=32M] Capabilities: <access denied> Kernel driver in use: agpgart-intel00:01.0 PCI bridge [0604]: Intel Corporation 82865G/PE/P PCI to AGP Controller [8086:2571] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fe900000-fe9fffff Prefetchable memory behind bridge: bbf00000-fbefffffSecondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-00:06.0 System peripheral [0880]: Intel Corporation 82865G/PE/P Processor to I/O Memory Interface [8086:2576] (rev 02) Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Region 0: Memory at fecf0000 (32-bit, non-prefetchable) [size=4K]00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [8086:24d2] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard [1043:80a6] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at eec0 [size=32] Kernel driver in use: uhci_hcd00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [8086:24d4] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard [1043:80a6] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at ef00 [size=32] Kernel driver in use: uhci_hcd00:1d.2 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 [8086:24d7] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard [1043:80a6] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at ef20 [size=32] Kernel driver in use: uhci_hcd00:1d.3 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 [8086:24de] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard [1043:80a6] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at ef40 [size=32] Kernel driver in use: uhci_hcd00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [8086:24dd] (rev 02) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard [1043:80a6] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 0 Interrupt: pin D routed to IRQ 23 Region 0: Memory at febff800 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c2) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=64 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fea00000-feafffff Prefetchable memory behind bridge: 60000000-600fffffSecondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 000:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller [8086:24db] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard [1043:80a6] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 0 Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at efe0 [size=8] Region 1: I/O ports at efac [size=4] Region 2: I/O ports at efa0 [size=8] Region 3: I/O ports at efa8 [size=4] Region 4: I/O ports at ef90 [size=16] Region 5: Memory at 60100000 (32-bit, non-prefetchable) [size=1K] Kernel driver in use: PIIX_IDE00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller [8086:24d3] (rev 02)Subsystem: ASUSTeK Computer Inc. P4P800 Mainboard [1043:80a6]Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at 0400 [size=32] Kernel driver in use: i801_smbus00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller [8086:24d5] (rev 02)Subsystem: ASUSTeK Computer Inc. Device [1043:812a]Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at e800 [size=256] Region 1: I/O ports at ee80 [size=64] Region 2: Memory at febfb800 (32-bit, non-prefetchable) [size=512] Region 3: Memory at febfb400 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: Intel ICH01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV350 AP [Radeon 9600] [1002:4150] (prog-if 00 [VGA controller])Subsystem: C.P. Technology Co. Ltd Device [148c:2070]Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 64 (2000ns min), Cache Line Size: 16 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M] Region 1: I/O ports at c000 [size=256] Region 2: Memory at fe9f0000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at fe9c0000 [disabled] [size=128K] Capabilities: <access denied>01:00.1 Display controller [0380]: ATI Technologies Inc RV350 AP [Radeon 9600] (Secondary) [1002:4170]Subsystem: C.P. Technology Co. Ltd Device [148c:2071]Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 64 (2000ns min), Cache Line Size: 16 bytes Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M] Region 1: Memory at fe9e0000 (32-bit, non-prefetchable) [size=64K] Capabilities: <access denied>02:03.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306 Fire II IEEE 1394 OHCI Link Layer Controller [1106:3044] (rev 80) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. A8V/A8N/P4P800 series motherboard [1043:808a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 64 (8000ns max), Cache Line Size: 16 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at feafe800 (32-bit, non-prefetchable) [size=2K] Region 1: I/O ports at dc00 [size=128] Capabilities: <access denied> Kernel driver in use: firewire_ohci02:05.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller [11ab:4320] (rev 13) Subsystem: ASUSTeK Computer Inc. Marvell 88E8001 Gigabit Ethernet Controller (Asus) [1043:811a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 64 (5750ns min, 7750ns max), Cache Line Size: 16 bytes Interrupt: pin A routed to IRQ 22 Region 0: Memory at feaf8000 (32-bit, non-prefetchable) [size=16K] Region 1: I/O ports at d800 [size=256] Expansion ROM at 60000000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: skge02:0b.0 Modem [0703]: ALi Corporation SmartLink SmartPCI561 56K Modem [10b9:5459] (prog-if 00 [Generic])Subsystem: Smart Link Ltd. Device [10a5:5459]Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-Latency: 64 Interrupt: pin A routed to IRQ 23 Region 0: Memory at feafd000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at d400 [size=256] Capabilities: <access denied> Kernel driver in use: serial ** USB devices: Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubBus 001 Device 002: ID 0951:1601 Kingston Technology DataTraveler II+ Pen DriveBus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (900, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.32-trunk-686 (SMP w/2 CPU cores) Locale: LANG=pt_PT.UTF-8, LC_CTYPE=pt_PT.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.32-trunk-686 depends on:ii debconf [debconf-2.0] 1.5.28 Debian configuration management sy ii initramfs-tools [linux-initra 0.93.4 tools for generating an initramfs ii module-init-tools 3.11-1 tools for managing Linux kernel moVersions of packages linux-image-2.6.32-trunk-686 recommends:ii firmware-linux-free 2.6.32-5 Binary firmware for various driver ii libc6-i686 2.10.2-2 GNU C Library: Shared libraries [iVersions of packages linux-image-2.6.32-trunk-686 suggests: pn grub | lilo <none> (no description available) pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-trunk-686 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available)ii firmware-linux 0.22 Binary firmware for various driver ii firmware-linux-nonfree 0.22 Binary firmware for various driverpn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) -- debconf information excluded
--- End Message ---
--- Begin Message ---
- To: 567435-done@bugs.debian.org
- Subject: Re: linux-image-2.6.32-trunk-686: address space collision
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Tue, 06 Apr 2010 05:23:31 +0100
- Message-id: <1270527811.24287.159.camel@localhost>
Closed due to lack of response. Sorry, we really do need more information as requested. Ben. -- Ben Hutchings Once a job is fouled up, anything done to improve it makes it worse.Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---