Your message dated Tue, 06 Apr 2010 04:37:03 +0100 with message-id <1270525023.24287.125.camel@localhost> and subject line Re: linux-image-2.6.30: btusb: 0a5c:2101 Broadcom USB in 'lsusb', but not in 'hcitool dev', regression from 2.6.30-6 has caused the Debian Bug report #551624, regarding linux-image-2.6.30: btusb: 0a5c:2101 Broadcom USB in 'lsusb', but not in 'hcitool dev', regression from 2.6.30-6 to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 551624: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=551624 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.30: btusb: 0a5c:2101 Broadcom USB in 'lsusb', but not in 'hcitool dev', regression from 2.6.30-6
- From: Vladimir S Eremin <me@hidded.name>
- Date: Mon, 19 Oct 2009 21:03:09 +0600
- Message-id: <20091019150309.5441.22211.reportbug@wind.local>
Package: linux-image-2.6.30-2-686 Version: 2.6.30-8 Severity: important File: linux-image-2.6.30 "0a5c:2101 Broadcom Corp. A-Link BlueUsbA2 Bluetooth" unusable, but works in linux-image-2.6.30-1-686=2.6.30-6. It is not listed in 'hcitool dev' and not available from 'hciconfig' etc, but listed in lsusb. -- Package-specific info: ** Version: Linux version 2.6.30-2-686 (Debian 2.6.30-8) (waldi@debian.org) (gcc version 4.3.4 (Debian 4.3.4-3) ) #1 SMP Sat Sep 26 01:16:22 UTC 2009 ** Command line: BOOT_IMAGE=/vmlinuz-2.6.30-2-686 root=/dev/mapper/wind-root ro console=tty7 quiet ** Not tainted ** Kernel log: [ 6.657228] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 6.657238] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 6.657247] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 6.778023] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6.778081] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 6.864107] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... [ 6.864350] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10 [ 7.072509] cfg80211: Calling CRDA for country: US [ 7.359737] b43-phy0: Broadcom 4311 WLAN found (core revision 10) [ 7.463003] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input11 [ 7.486988] phy0: Selected rate control algorithm 'minstrel' [ 7.489013] Broadcom 43xx driver loaded [ Features: PMLR, Firmware-ID: FW13 ] [ 7.781485] usb-storage: device scan complete [ 7.783465] scsi 4:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS [ 7.787881] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 9.181581] Adding 2097144k swap on /dev/mapper/wind-swap_1. Priority:-1 extents:1 across:2097144k [ 9.593021] EXT3 FS on dm-0, internal journal [ 11.258225] kjournald starting. Commit interval 5 seconds [ 11.258556] EXT3 FS on sda1, internal journal [ 11.258573] EXT3-fs: mounted filesystem with ordered data mode. [ 11.292800] kjournald starting. Commit interval 5 seconds [ 11.293211] EXT3 FS on dm-4, internal journal [ 11.293228] EXT3-fs: mounted filesystem with ordered data mode. [ 14.161661] r8169: eth0: link up [ 14.161682] r8169: eth0: link up [ 14.448310] r8169: eth0: link up [ 15.396139] Clocksource tsc unstable (delta = -71291356 ns) [ 25.212127] eth0: no IPv6 routers present [ 27.860816] usb 1-1.3: new high speed USB device using ehci_hcd and address 7 [ 27.969261] usb 1-1.3: New USB device found, idVendor=05ac, idProduct=1301 [ 27.969278] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 27.969290] usb 1-1.3: Product: iPod [ 27.969299] usb 1-1.3: Manufacturer: Apple [ 27.969308] usb 1-1.3: SerialNumber: 000A270011EC00A4 [ 27.969628] usb 1-1.3: configuration #1 chosen from 2 choices [ 27.971304] scsi5 : SCSI emulation for USB Mass Storage devices [ 27.972578] usb-storage: device found at 7 [ 27.972591] usb-storage: waiting for device to settle before scanning [ 32.972429] usb-storage: device scan complete [ 32.973111] scsi 5:0:0:0: Direct-Access Apple iPod 2.70 PQ: 0 ANSI: 2 [ 32.976185] sd 5:0:0:0: [sdc] 495616 2048-byte hardware sectors: (1.01 GB/968 MiB) [ 32.976790] sd 5:0:0:0: [sdc] Write Protect is off [ 32.976812] sd 5:0:0:0: [sdc] Mode Sense: 64 00 00 08 [ 32.976826] sd 5:0:0:0: [sdc] Assuming drive cache: write through [ 32.979832] sd 5:0:0:0: [sdc] 495616 2048-byte hardware sectors: (1.01 GB/968 MiB) [ 32.980427] sd 5:0:0:0: [sdc] Assuming drive cache: write through [ 32.981617] sdc: [ 32.991162] sd 5:0:0:0: [sdc] Attached SCSI removable disk [ 36.368578] Bluetooth: Core ver 2.15 [ 36.368788] NET: Registered protocol family 31 [ 36.368801] Bluetooth: HCI device and connection manager initialized [ 36.368815] Bluetooth: HCI socket layer initialized [ 36.391438] Bluetooth: L2CAP ver 2.13 [ 36.391451] Bluetooth: L2CAP socket layer initialized [ 36.427069] Bluetooth: RFCOMM socket layer initialized [ 36.427100] Bluetooth: RFCOMM TTY layer initialized [ 36.427113] Bluetooth: RFCOMM ver 1.11 [ 36.552440] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 36.552452] Bluetooth: BNEP filters: protocol multicast [ 36.777362] Bridge firewalling registered [ 36.876948] Bluetooth: SCO (Voice Link) ver 0.6 [ 36.876963] Bluetooth: SCO socket layer initialized [ 39.475544] lp: driver loaded but no devices found [ 39.511675] ppdev: user-space parallel port driver [ 123.654578] [drm] Initialized drm 1.1.0 20060810 [ 123.721947] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 123.721971] pci 0000:00:02.0: setting latency timer to 64 [ 123.728328] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 ** Loaded modules: Module Size Used by i915 149164 1 drm 137920 2 i915 i2c_algo_bit 4860 1 i915 i2c_core 20844 3 i915,drm,i2c_algo_bit ppdev 6348 0 lp 8012 0 parport 31144 2 ppdev,lp sco 8816 2 bridge 39968 0 stp 2112 1 bridge bnep 10860 2 rfcomm 30340 1 l2cap 18088 6 bnep,rfcomm bluetooth 47028 6 sco,bnep,rfcomm,l2cap vfat 8628 0 fat 41452 1 vfat nls_base 6416 2 vfat,fat ext2 54120 2 acpi_cpufreq 7640 0 arc4 1560 2 ecb 2368 2 b43 108932 0 rfkill 9668 1 b43 mac80211 142984 1 b43 snd_hda_codec_realtek 178564 1 snd_hda_intel 22192 0 snd_hda_codec 63580 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 6120 1 snd_hda_codec snd_pcm_oss 32228 0 snd_mixer_oss 12368 1 snd_pcm_oss snd_pcm 62396 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss snd_seq_midi 5688 0 snd_rawmidi 18596 1 snd_seq_midi snd_seq_midi_event 6212 1 snd_seq_midi snd_seq 42436 2 snd_seq_midi,snd_seq_midi_event snd_timer 17436 2 snd_pcm,snd_seq snd_seq_device 6136 3 snd_seq_midi,snd_rawmidi,snd_seq cfg80211 55572 2 b43,mac80211 snd 49060 11 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 6184 1 snd psmouse 37528 0 led_class 3852 1 b43 pcspkr 2104 0 serio_raw 4560 0 rng_core 3672 1 b43 input_polldev 3588 1 b43 wmi 6172 0 evdev 8028 24 snd_page_alloc 8180 2 snd_hda_intel,snd_pcm ac 2960 0 battery 6012 0 processor 34560 3 acpi_cpufreq button 5060 0 ext3 107172 3 jbd 41036 1 ext3 mbcache 6924 2 ext2,ext3 dm_mod 49992 16 usbhid 31568 0 hid 34528 1 usbhid sd_mod 28740 3 crc_t10dif 1632 1 sd_mod usb_storage 48564 0 ahci 30068 2 libata 151044 1 ahci ssb 37692 1 b43 uhci_hcd 19136 0 ehci_hcd 29812 0 pcmcia 24280 2 b43,ssb r8169 27692 0 mii 4664 1 r8169 pcmcia_core 31212 3 b43,ssb,pcmcia intel_agp 23052 1 scsi_mod 131800 3 sd_mod,usb_storage,libata agpgart 30836 3 drm,intel_agp usbcore 126052 5 usbhid,usb_storage,uhci_hcd,ehci_hcd video 18044 1 i915 output 2604 1 video thermal 12580 0 fan 4044 0 thermal_sys 13140 4 processor,video,thermal,fan ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GME Express Memory Controller Hub [8086:27ac] (rev 03) Subsystem: Micro-Star International Co., Ltd. Device [1462:0110] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GME Express Integrated Graphics Controller [8086:27ae] (rev 03) (prog-if 00 [VGA controller]) Subsystem: Micro-Star International Co., Ltd. Device [1462:0110] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at dfe80000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at e100 [size=8] Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at dff00000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> 00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03) Subsystem: Micro-Star International Co., Ltd. Device [1462:0110] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at dfe00000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied> 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02) Subsystem: Micro-Star International Co., Ltd. Device [1462:0110] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at ffe00000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: dfd00000-dfdfffff Prefetchable memory behind bridge: 00000000ffd00000-00000000ffdfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver 00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: dfc00000-dfcfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI]) Subsystem: Micro-Star International Co., Ltd. Device [1462:0110] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at e0a0 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI]) Subsystem: Micro-Star International Co., Ltd. Device [1462:0110] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at e080 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI]) Subsystem: Micro-Star International Co., Ltd. Device [1462:0110] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at e060 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI]) Subsystem: Micro-Star International Co., Ltd. Device [1462:0110] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 16 Region 4: I/O ports at e040 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI]) Subsystem: Micro-Star International Co., Ltd. Device [1462:0110] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at dff40400 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=32 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02) Subsystem: Micro-Star International Co., Ltd. Device [1462:0110] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 SATA controller [0106]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller [8086:27c5] (rev 02) (prog-if 01 [AHCI 1.0]) Subsystem: Micro-Star International Co., Ltd. Device [1462:0110] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 27 Region 0: I/O ports at e0f0 [size=8] Region 1: I/O ports at e0e0 [size=4] Region 2: I/O ports at e0d0 [size=8] Region 3: I/O ports at e0c0 [size=4] Region 4: I/O ports at e020 [size=16] Region 5: Memory at dff40000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci 01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02) Subsystem: Micro-Star International Co., Ltd. Device [1462:0110] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 26 Region 0: I/O ports at d000 [size=256] Region 2: Memory at ffd10000 (64-bit, prefetchable) [size=4K] Region 4: Memory at ffd00000 (64-bit, prefetchable) [size=64K] Expansion ROM at dfd00000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: r8169 02:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11a/b/g [14e4:4312] (rev 01) Subsystem: Hewlett-Packard Company Broadcom 802.11a/b/g WLAN [103c:1361] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at dfc00000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: b43-pci-bridge -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (990, 'testing'), (500, 'testing-proposed-updates'), (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.30-2-686 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.30-2-686 depends on: ii debconf [debconf-2.0] 1.5.27 Debian configuration management sy ii initramfs-tools [linux-initra 0.93.4 tools for generating an initramfs ii module-init-tools 3.10-3 tools for managing Linux kernel mo Versions of packages linux-image-2.6.30-2-686 recommends: ii libc6-i686 2.9-25 GNU C Library: Shared libraries [i Versions of packages linux-image-2.6.30-2-686 suggests: pn grub | lilo <none> (no description available) pn linux-doc-2.6.30 <none> (no description available) -- debconf information: linux-image-2.6.30-2-686/postinst/bootloader-test-error-2.6.30-2-686: shared/kernel-image/really-run-bootloader: true linux-image-2.6.30-2-686/preinst/failed-to-move-modules-2.6.30-2-686: linux-image-2.6.30-2-686/preinst/lilo-initrd-2.6.30-2-686: true linux-image-2.6.30-2-686/postinst/old-dir-initrd-link-2.6.30-2-686: true linux-image-2.6.30-2-686/preinst/initrd-2.6.30-2-686: linux-image-2.6.30-2-686/preinst/elilo-initrd-2.6.30-2-686: true linux-image-2.6.30-2-686/postinst/depmod-error-2.6.30-2-686: false linux-image-2.6.30-2-686/postinst/old-initrd-link-2.6.30-2-686: true linux-image-2.6.30-2-686/preinst/abort-install-2.6.30-2-686: linux-image-2.6.30-2-686/postinst/kimage-is-a-directory: linux-image-2.6.30-2-686/preinst/bootloader-initrd-2.6.30-2-686: true linux-image-2.6.30-2-686/postinst/bootloader-error-2.6.30-2-686: linux-image-2.6.30-2-686/prerm/removing-running-kernel-2.6.30-2-686: true linux-image-2.6.30-2-686/preinst/overwriting-modules-2.6.30-2-686: true linux-image-2.6.30-2-686/preinst/abort-overwrite-2.6.30-2-686: linux-image-2.6.30-2-686/postinst/depmod-error-initrd-2.6.30-2-686: false linux-image-2.6.30-2-686/postinst/create-kimage-link-2.6.30-2-686: true linux-image-2.6.30-2-686/prerm/would-invalidate-boot-loader-2.6.30-2-686: true linux-image-2.6.30-2-686/preinst/lilo-has-ramdisk: linux-image-2.6.30-2-686/postinst/old-system-map-link-2.6.30-2-686: true
--- End Message ---
--- Begin Message ---
- To: 551624-done@bugs.debian.org
- Subject: Re: linux-image-2.6.30: btusb: 0a5c:2101 Broadcom USB in 'lsusb', but not in 'hcitool dev', regression from 2.6.30-6
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Tue, 06 Apr 2010 04:37:03 +0100
- Message-id: <1270525023.24287.125.camel@localhost>
Closed due to lack of response. Ben. -- Ben Hutchings Once a job is fouled up, anything done to improve it makes it worse.Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---