[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#571459: marked as done (linux-image-2.6.32-2-686: Mount as empty a smb alfresco share, but 2.6.30 do it fine)



Your message dated Mon, 22 Mar 2010 18:46:49 +0100
with message-id <20100322174649.GI21406@baikonur.stro.at>
and subject line Re:  linux-2.6: it works with noserverino option
has caused the Debian Bug report #571459,
regarding linux-image-2.6.32-2-686: Mount as empty a smb alfresco share, but 2.6.30 do it fine
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
571459: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=571459
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: linux-2.6
Version: 2.6.32-8
Severity: normal


Hi,

Today I tried to mount a share from alfresco via smbfs.

With older linux-image versions (I can test it with 2.6.30 for example):

mount -t smbfs //alfresco/share ~/alfresco

works fine and ls ~/alfresco show me all my files

But with this kernel 2.6.32-8:

mount -t smbfs //alfresco/share ~/alfresco

seems to work fine but ls ~/alfresco doesn't show me any file and I can't access to them

I would try with a newer kernel, but kernel-archive.buildserver.net is down, at least this tell our wiki (w.d.o/DebianKernel)

I have too a PDC which samba, and its shares are working when I access to them with the two kernels (2.6.32 and 2.6.30). I'm afraid it could be an alfresco issue :(, but like it works with 2.6.30 kernel version, I'm opening this bug.

Thank you very much

-- Package-specific info:
** Version:
Linux version 2.6.32-2-686 (Debian 2.6.32-8) (ben@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Thu Feb 11 04:08:42 UTC 2010

** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-2-686 root=/dev/mapper/delorian-root ro quiet

** Tainted: P (1)
 * Proprietary module has been loaded.

** Kernel log:
[    3.616063] usb 3-1: new full speed USB device using uhci_hcd and address 2
[    3.643900] PM: Starting manual resume from disk
[    3.643905] PM: Resume from partition 254:1
[    3.643908] PM: Checking hibernation image.
[    3.644072] PM: Error -22 checking image file
[    3.644076] PM: Resume from disk failed.
[    3.668785] kjournald starting.  Commit interval 5 seconds
[    3.668799] EXT3-fs: mounted filesystem with ordered data mode.
[    3.762307] usb 3-1: New USB device found, idVendor=047f, idProduct=c001
[    3.762314] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.762439] usb 3-1: configuration #1 chosen from 1 choice
[    5.065247] udev: starting version 151
[    5.375332] ACPI: SSDT 5ffe2b27 00453 (v01 COMPAQ  CPU_TM2 00000001 MSFT 0100000E)
[    5.375765] processor LNXCPU:00: registered as cooling_device0
[    5.376043] processor LNXCPU:01: registered as cooling_device1
[    5.378574] input: PC Speaker as /devices/platform/pcspkr/input/input3
[    5.412751] parport_pc 00:07: reported by Plug and Play ACPI
[    5.413107] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[    5.493623] ACPI: WMI: Mapper loaded
[    5.664936] intel_rng: Firmware space is locked read-only. If you can't or
[    5.664939] intel_rng: don't want to disable this in firmware setup, and if
[    5.664941] intel_rng: you are certain that your system has a functional
[    5.664942] intel_rng: RNG, try using the 'no_fwh_detect' option.
[    5.818603] usbcore: registered new interface driver hiddev
[    5.822610] input: HID 047f:c001 as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.3/input/input4
[    5.822715] generic-usb 0003:047F:C001.0001: input,hidraw0: USB HID v1.00 Device [HID 047f:c001] on usb-0000:00:1d.1-1/input3
[    5.822744] usbcore: registered new interface driver usbhid
[    5.822748] usbhid: v2.6:USB HID core driver
[    6.149578] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[    6.170870] nvidia: module license 'NVIDIA' taints kernel.
[    6.170876] Disabling lock debugging due to kernel taint
[    6.878130] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    6.878163] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    6.948782] usbcore: registered new interface driver snd-usb-audio
[    6.967330] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[    7.035693] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    7.035703] nvidia 0000:01:00.0: setting latency timer to 64
[    7.035927] NVRM: loading NVIDIA UNIX x86 Kernel Module  190.53  Tue Dec  8 18:51:41 PST 2009
[    9.354537] EXT3 FS on dm-0, internal journal
[    9.449650] loop: module loaded
[    9.480534] smsc47b397: found SMSC SCH5307-NS (base address 0x0480, revision 0)
[    9.520621] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[    9.520625] vboxdrv: Successfully done.
[    9.520628] vboxdrv: Found 2 processor cores.
[    9.521197] vboxdrv: fAsync=0 offMin=0x915 offMax=0x3480
[    9.521255] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[    9.521258] vboxdrv: Successfully loaded version 3.1.4_OSE (interface 0x00100001).
[   10.745840] kjournald starting.  Commit interval 5 seconds
[   10.746013] EXT3 FS on sda1, internal journal
[   10.746021] EXT3-fs: mounted filesystem with ordered data mode.
[   10.797273] kjournald starting.  Commit interval 5 seconds
[   10.797513] EXT3 FS on dm-5, internal journal
[   10.797519] EXT3-fs: mounted filesystem with ordered data mode.
[   10.826649] kjournald starting.  Commit interval 5 seconds
[   10.826878] EXT3 FS on dm-2, internal journal
[   10.826885] EXT3-fs: mounted filesystem with ordered data mode.
[   10.844095] kjournald starting.  Commit interval 5 seconds
[   10.844295] EXT3 FS on dm-3, internal journal
[   10.844301] EXT3-fs: mounted filesystem with ordered data mode.
[   10.873563] kjournald starting.  Commit interval 5 seconds
[   10.873753] EXT3 FS on dm-4, internal journal
[   10.873760] EXT3-fs: mounted filesystem with ordered data mode.
[   11.501829] EXT4-fs (dm-28): warning: maximal mount count reached, running e2fsck is recommended
[   11.502399] EXT4-fs (dm-28): mounted filesystem with ordered data mode
[   11.627231] EXT4-fs (dm-29): warning: maximal mount count reached, running e2fsck is recommended
[   11.628574] EXT4-fs (dm-29): mounted filesystem with ordered data mode
[   11.833333] Adding 1572856k swap on /dev/mapper/delorian-swap.  Priority:-1 extents:1 across:1572856k 
[   13.915529] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
[   13.915534] All bugs added by David S. Miller <davem@redhat.com>
[   14.018121] tg3 0000:3f:00.0: irq 27 for MSI/MSI-X
[   14.064732] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   14.498621] Bridge firewalling registered
[   14.510622] device vlan192 entered promiscuous mode
[   14.511876] device eth0 entered promiscuous mode
[   14.516576] br-lan: port 1(vlan192) entering forwarding state
[   17.146645] tg3: eth0: Link is up at 1000 Mbps, full duplex.
[   17.146650] tg3: eth0: Flow control is off for TX and off for RX.
[   17.146806] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   18.376316] device vlan99 entered promiscuous mode
[   18.380822] br-gest: port 1(vlan99) entering learning state
[   19.634012] fuse init (API version 7.13)
[   24.712506] vlan192: no IPv6 routers present
[   25.264506] br-lan: no IPv6 routers present
[   27.152009] eth0: no IPv6 routers present
[   28.512014] br-gest: no IPv6 routers present
[   28.992008] vlan99: no IPv6 routers present
[   33.380015] br-gest: port 1(vlan99) entering forwarding state
[   34.824703] lp0: using parport0 (interrupt-driven).
[   35.163576] ppdev: user-space parallel port driver
[ 4261.610460] Slow work thread pool: Starting up
[ 4261.613915] Slow work thread pool: Ready
[ 5051.884072] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
[ 5051.884082]  CIFS VFS: Send error in SessSetup = -13
[ 5051.884095]  CIFS VFS: cifs_mount failed w/return code = -13
[ 5060.115599] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
[ 5060.115609]  CIFS VFS: Send error in SessSetup = -13
[ 5060.115619]  CIFS VFS: cifs_mount failed w/return code = -13
[ 5062.611615] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
[ 5062.611626]  CIFS VFS: Send error in SessSetup = -13
[ 5062.611639]  CIFS VFS: cifs_mount failed w/return code = -13

** Model information
not available

** Loaded modules:
Module                  Size  Used by
nls_utf8                 908  0 
cifs                  219974  0 
ppdev                   4058  0 
lp                      5570  0 
vboxnetadp              5154  0 
acpi_cpufreq            4907  0 
cpufreq_stats           1940  0 
cpufreq_powersave        602  0 
cpufreq_conservative     4018  0 
cpufreq_userspace       1444  0 
fuse                   43554  1 
bridge                 32851  0 
8021q                  13950  0 
garp                    4066  1 8021q
stp                      996  2 bridge,garp
ext4                  254301  2 
jbd2                   55835  1 ext4
crc16                   1027  1 ext4
vboxnetflt             10202  0 
vboxdrv               114413  2 vboxnetadp,vboxnetflt
smsc47b397              2279  0 
loop                    9721  0 
snd_hda_codec_realtek   162919  1 
snd_usb_audio          50418  2 
snd_usb_lib            10957  1 snd_usb_audio
snd_hda_intel          16211  0 
snd_seq_midi            3576  0 
snd_hda_codec          46002  2 snd_hda_codec_realtek,snd_hda_intel
snd_seq_midi_event      3684  1 snd_seq_midi
snd_rawmidi            12505  2 snd_usb_lib,snd_seq_midi
snd_pcm                47362  4 snd_usb_audio,snd_hda_intel,snd_hda_codec
snd_hwdep               4054  2 snd_usb_audio,snd_hda_codec
nvidia               8783671  28 
usbhid                 27756  0 
snd_seq                35327  2 snd_seq_midi,snd_seq_midi_event
snd_timer              12258  3 snd_pcm,snd_seq
rng_core                2178  0 
snd_seq_device          3673  3 snd_seq_midi,snd_rawmidi,snd_seq
hid                    50593  1 usbhid
i2c_core               12612  1 nvidia
snd                    34327  12 snd_hda_codec_realtek,snd_usb_audio,snd_hda_intel,snd_hda_codec,snd_rawmidi,snd_pcm,snd_hwdep,snd_seq,snd_timer,snd_seq_device
wmi                     3575  0 
psmouse                44381  0 
soundcore               3450  1 snd
snd_page_alloc          4977  2 snd_hda_intel,snd_pcm
parport_pc             15799  1 
serio_raw               2916  0 
parport                22554  3 ppdev,lp,parport_pc
evdev                   5609  13 
pcspkr                  1207  0 
processor              25811  1 acpi_cpufreq
ext3                   93828  6 
jbd                    31965  1 ext3
mbcache                 3762  2 ext4,ext3
dm_mod                 45878  73 
sd_mod                 25717  3 
crc_t10dif              1012  1 sd_mod
ide_cd_mod             21044  0 
cdrom                  26487  1 ide_cd_mod
ata_generic             2015  0 
ide_pci_generic         1924  0 
uhci_hcd               15977  0 
ehci_hcd               27346  0 
tg3                    88053  0 
intel_agp              20165  0 
ata_piix               16513  2 
piix                    3564  0 
floppy                 40923  0 
agpgart                19516  2 nvidia,intel_agp
libphy                 11238  1 tg3
libata                114180  2 ata_generic,ata_piix
button                  3598  0 
scsi_mod              101069  2 sd_mod,libata
ide_core               63850  3 ide_cd_mod,ide_pci_generic,piix
usbcore                97930  6 snd_usb_audio,snd_usb_lib,usbhid,uhci_hcd,ehci_hcd
nls_base                4541  3 nls_utf8,cifs,usbcore
thermal                 9206  0 
fan                     2586  0 
thermal_sys             9378  3 processor,thermal,fan

** Network interface configuration:

auto lo
iface lo inet loopback


auto eth0
iface eth0 inet manual

auto vlan192
iface vlan192 inet manual
        vlan-raw-device eth0

auto vlan99
iface vlan99 inet manual
        vlan-raw-device eth0

auto br-lan
iface br-lan inet static
        address 192.168.101.120
        netmask 255.255.0.0
        bridge_ports vlan192
        bridge_stp off
        bridge_fd 0
        gateway 192.168.100.1

auto br-gest
iface br-gest inet static
       address 10.4.0.120
       netmask 255.255.255.0
       bridge_ports vlan99
       bridge_stp off
       bridge_maxwait 0



** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
    link/ether 00:17:a4:20:b5:ad brd ff:ff:ff:ff:ff:ff
    inet6 fe80::217:a4ff:fe20:b5ad/64 scope link 
       valid_lft forever preferred_lft forever
3: vlan192@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP 
    link/ether 00:17:a4:20:b5:ad brd ff:ff:ff:ff:ff:ff
    inet6 fe80::217:a4ff:fe20:b5ad/64 scope link 
       valid_lft forever preferred_lft forever
4: vlan99@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP 
    link/ether 00:17:a4:20:b5:ad brd ff:ff:ff:ff:ff:ff
    inet6 fe80::217:a4ff:fe20:b5ad/64 scope link 
       valid_lft forever preferred_lft forever
5: br-lan: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN 
    link/ether 00:17:a4:20:b5:ad brd ff:ff:ff:ff:ff:ff
    inet 192.168.101.120/16 brd 192.168.255.255 scope global br-lan
    inet6 fe80::217:a4ff:fe20:b5ad/64 scope link 
       valid_lft forever preferred_lft forever
6: br-gest: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN 
    link/ether 00:17:a4:20:b5:ad brd ff:ff:ff:ff:ff:ff
    inet 10.4.0.120/24 brd 10.4.0.255 scope global br-gest
    inet6 fe80::217:a4ff:fe20:b5ad/64 scope link 
       valid_lft forever preferred_lft forever
7: vboxnet0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
    link/ether 0a:00:27:00:00:00 brd ff:ff:ff:ff:ff:ff

*** Device statistics:
Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo frame compressed multicast|bytes    packets errs drop fifo colls carrier compressed
    lo:    1160      20    0    0    0     0          0         0     1160      20    0    0    0     0       0          0
  eth0:13319958   96517    0    0    0     0          0     30879   991519    5007    0    0    0     0       0          0
vlan192:10691567   92197    0    0    0     0          0     26791   940298    4923    0    8    0     0       0          0
vlan99:  204831    1427    0    0    0     0          0      1195     8831      80    0    0    0     0       0          0
br-lan:10511388   89432    0    0    0     0          0     85054   940438    4925    0    0    0     0       0          0
br-gest:  204411    1422    0    0    0     0          0      1403     8831      80    0    0    0     0       0          0
vboxnet0:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0

*** Protocol statistics:
Ip:
    50644 total packets received
    1 with invalid addresses
    0 forwarded
    0 incoming packets discarded
    36212 incoming packets delivered
    4743 requests sent out
    8 dropped because of missing route
Icmp:
    3 ICMP messages received
    0 input ICMP message failed.
    ICMP input histogram:
        echo requests: 3
    3 ICMP messages sent
    0 ICMP messages failed
    ICMP output histogram:
        echo replies: 3
IcmpMsg:
        InType8: 3
        OutType0: 3
Tcp:
    186 active connections openings
    5 passive connection openings
    7 failed connection attempts
    13 connection resets received
    6 connections established
    3196 segments received
    3579 segments send out
    3 segments retransmited
    0 bad segments received.
    64 resets sent
Udp:
    25466 packets received
    0 packets to unknown port received.
    0 packet receive errors
    1156 packets sent
UdpLite:
TcpExt:
    1 resets received for embryonic SYN_RECV sockets
    39 TCP sockets finished time wait in fast timer
    389 delayed acks sent
    Quick ack mode was activated 2 times
    279 packets directly queued to recvmsg prequeue.
    1649 packet headers predicted
    398 acknowledgments not containing data payload received
    683 predicted acknowledgments
    3 congestion windows recovered without slow start after partial ack
    3 other TCP timeouts
    2 DSACKs sent for old packets
    3 DSACKs received
    9 connections reset due to unexpected data
    11 connections reset due to early user close
IpExt:
    InMcastPkts: 8577
    OutMcastPkts: 194
    InBcastPkts: 23293
    OutBcastPkts: 119
    InOctets: 8342549
    OutOctets: 851165
    InMcastOctets: 1671003
    OutMcastOctets: 31637
    InBcastOctets: 2912185
    OutBcastOctets: 15552

*** Device features:
br-gest: 0x1800
br-lan: 0x1800
eth0: 0x109a3
lo: 0x13865
vboxnet0: 0x0
vlan192: 0x0
vlan99: 0x0

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub [8086:2770] (rev 02)
	Subsystem: Hewlett-Packard Company Device [103c:3011]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:01.0 PCI bridge [0604]: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port [8086:2771] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 00001000-00001fff
	Memory behind bridge: e2000000-e51fffff
	Prefetchable memory behind bridge: 00000000d0000000-00000000e01fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 01)
	Subsystem: Hewlett-Packard Company Device [103c:3011]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 21
	Region 0: Memory at e0500000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: HDA Intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=20, subordinate=20, sec-latency=0
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: 60000000-601fffff
	Prefetchable memory behind bridge: 0000000060200000-00000000603fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 01) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=3f, subordinate=3f, sec-latency=0
	I/O behind bridge: 00004000-00004fff
	Memory behind bridge: e0200000-e04fffff
	Prefetchable memory behind bridge: 0000000060400000-00000000605fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI])
	Subsystem: Hewlett-Packard Company Device [103c:3011]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 20
	Region 4: I/O ports at 2000 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI])
	Subsystem: Hewlett-Packard Company Device [103c:3011]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 18
	Region 4: I/O ports at 2020 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI])
	Subsystem: Hewlett-Packard Company Device [103c:3011]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 21
	Region 4: I/O ports at 2040 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI])
	Subsystem: Hewlett-Packard Company Device [103c:3011]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin D routed to IRQ 22
	Region 4: I/O ports at 2060 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI])
	Subsystem: Hewlett-Packard Company Device [103c:3011]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 20
	Region 0: Memory at e0504000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01)
	Subsystem: Hewlett-Packard Company Device [103c:3011]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP])
	Subsystem: Hewlett-Packard Company Device [103c:3011]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 17
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4 [size=1]
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374 [size=1]
	Region 4: I/O ports at 20a0 [size=16]
	Kernel driver in use: PIIX_IDE

00:1f.2 IDE interface [0101]: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
	Subsystem: Hewlett-Packard Company Device [103c:3011]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 0: I/O ports at 20d0 [size=8]
	Region 1: I/O ports at 20e8 [size=4]
	Region 2: I/O ports at 20d8 [size=8]
	Region 3: I/O ports at 20ec [size=4]
	Region 4: I/O ports at 20b0 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: ata_piix

01:00.0 VGA compatible controller [0300]: nVidia Corporation G96 [GeForce 9400 GT] [10de:0641] (rev a1) (prog-if 00 [VGA controller])
	Subsystem: ASUSTeK Computer Inc. Device [1043:82be]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at e4000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
	Region 3: Memory at e2000000 (64-bit, non-prefetchable) [size=32M]
	Region 5: I/O ports at 1000 [size=128]
	[virtual] Expansion ROM at e0000000 [disabled] [size=512K]
	Capabilities: <access denied>
	Kernel driver in use: nvidia

3f:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5752 Gigabit Ethernet PCI Express [14e4:1600] (rev 01)
	Subsystem: Hewlett-Packard Company Device [103c:3011]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 27
	Region 0: Memory at e0400000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: tg3


** USB devices:
Bus 003 Device 002: ID 047f:c001 Plantronics, Inc. 
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


-- System Information:
Debian Release: squeeze/sid
  APT prefers unstable
  APT policy: (990, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 2.6.32-2-686 (SMP w/2 CPU cores)
Locale: LANG=es_ES.UTF-8, LC_CTYPE=es_ES.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.32-2-686 depends on:
ii  debconf [debconf-2.0]        1.5.28      Debian configuration management sy
ii  initramfs-tools [linux-initr 0.93.4      tools for generating an initramfs
ii  module-init-tools            3.12~pre1-1 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.32-2-686 recommends:
ii  firmware-linux-free           2.6.32-8   Binary firmware for various driver
ii  libc6-i686                    2.10.2-5   GNU C Library: Shared libraries [i

Versions of packages linux-image-2.6.32-2-686 suggests:
pn  grub | lilo                   <none>     (no description available)
pn  linux-doc-2.6.32              <none>     (no description available)

Versions of packages linux-image-2.6.32-2-686 is related to:
pn  firmware-bnx2                 <none>     (no description available)
pn  firmware-bnx2x                <none>     (no description available)
pn  firmware-ipw2x00              <none>     (no description available)
pn  firmware-ivtv                 <none>     (no description available)
pn  firmware-iwlwifi              <none>     (no description available)
pn  firmware-linux                <none>     (no description available)
pn  firmware-linux-nonfree        <none>     (no description available)
pn  firmware-qlogic               <none>     (no description available)
pn  firmware-ralink               <none>     (no description available)

-- debconf information:
  linux-image-2.6.32-2-686/prerm/would-invalidate-boot-loader-2.6.32-2-686: true
  linux-image-2.6.32-2-686/postinst/bootloader-test-error-2.6.32-2-686:
* linux-image-2.6.32-2-686/postinst/missing-firmware-2.6.32-2-686:
  shared/kernel-image/really-run-bootloader: true
  linux-image-2.6.32-2-686/postinst/depmod-error-initrd-2.6.32-2-686: false
  linux-image-2.6.32-2-686/postinst/bootloader-error-2.6.32-2-686:
  linux-image-2.6.32-2-686/prerm/removing-running-kernel-2.6.32-2-686: true



--- End Message ---
--- Begin Message ---
thanks for your upstream report.

as there is a workaround I'm closing the bug.
thanks for the report.


--- End Message ---

Reply to: