Heyho!
Seems that the exact error message varies. Same hardware, same software:
dmesg this time
+++
[ 4345.716012] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
[ 4345.716027] render error detected, EIR: 0x00000000
[ 4345.716045] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 245106 at 245105)
[ 4348.220013] [drm:i915_gem_idle] *ERROR* hardware wedged
[ 4357.031224] [drm:i915_gem_entervt_ioctl] *ERROR* Reenabling wedged hardware, good luck
[ 4357.380008] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
[ 4357.380017] render error detected, EIR: 0x00000000
[ 4357.380673] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 245109 at 245105)
[ 4359.236011] [drm:i915_gem_idle] *ERROR* hardware wedged
+++
Xorg.log ends with:
+++
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 444 x 277
Fatal server error:
Failed to submit batchbuffer: Input/output error
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
(II) AIGLX: Suspending AIGLX clients for VT switch
+++
(Xorg.log seems to vary. I've also seen
+++
Fatal server error:
DRM_I915_ENTERVT failed: Unknown error 4294967291
+++
some other time.)
root@newfai:~# dpkg -l | grep drm
ii libdrm-intel1 2.4.18-2 Userspace interface to intel-specific kernel
ii libdrm-radeon1 2.4.18-2 Userspace interface to radeon-specific kerne
ii libdrm2 2.4.18-2 Userspace interface to kernel DRM services -
root@newfai:~# dpkg -l | grep xorg
ii xorg 1:7.5+3 X.Org X Window System
ii xserver-xorg 1:7.5+3 the X.Org X server
ii xserver-xorg-core 2:1.7.5-1 Xorg X server - core server
ii xserver-xorg-video-intel 2:2.9.1-2 X.Org X server -- Intel i8xx, i9xx display d
[input and other video drivers removed]
root@newfai:~# lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 01)
kernel started with "mem=400M i915.modeset=0 i915.powersave=0"
Full logs attached.
Can I do anything else to help?
I've now updated to the very newest kernel, and at least switching to the
text console or enabling compositing (KDE4) still triggers the bug
immediately. Haven't seen it while just working normally in the last
hour, though.
--
Before too long, Voyager owners (both of them) should once again have
full support for their beloved architecture in the mainline kernel.
-- Jon Corbet
http://lwn.net/Articles/339421/
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.33-2-686 (Debian 2.6.33-1~experimental.4) (maks@debian.org) (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Thu Mar 18 07:30:30 UTC 2010 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001f7f0000 (usable) [ 0.000000] BIOS-e820: 000000001f7f0000 - 000000001f800000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS! [ 0.000000] user-defined physical RAM map: [ 0.000000] user: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] user: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] user: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] user: 0000000000100000 - 0000000019000000 (usable) [ 0.000000] user: 000000001f7f0000 - 000000001f800000 (reserved) [ 0.000000] user: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0x19000 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-back [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 01F800000 mask FFF800000 uncachable [ 0.000000] 1 base 000000000 mask FE0000000 write-back [ 0.000000] 2 base 0FEDA0000 mask FFFFE0000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 000000001f800000 - 00000000feda0000 (usable) ==> (reserved) [ 0.000000] initial memory mapped : 0 - 01800000 [ 0.000000] found SMP MP-table at [c00f9bf0] f9bf0 [ 0.000000] init_memory_mapping: 0000000000000000-0000000019000000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0019000000 page 2M [ 0.000000] kernel direct mapping tables up to 19000000 @ 7000-c000 [ 0.000000] RAMDISK: 187e7000 - 18fff135 [ 0.000000] ACPI: RSDP 000eaa10 00014 (v00 COMPAQ) [ 0.000000] ACPI: RSDT 000e6740 00078 (v01 COMPAQ CPQ0051 20030528 00000000) [ 0.000000] ACPI: FACP 000e67f8 00074 (v01 COMPAQ BROOKDG 00000001 00000000) [ 0.000000] ACPI: DSDT 000e68c6 00B73 (v01 COMPAQ DSDT 00000001 MSFT 0100000E) [ 0.000000] ACPI: FACS 000e6700 00040 [ 0.000000] ACPI: SSDT 000e7439 0073D (v01 COMPAQ PROJECT 00000001 MSFT 0100000E) [ 0.000000] ACPI: SSDT 000e7b76 0053A (v01 COMPAQ CORE_PNP 00000001 MSFT 0100000E) [ 0.000000] ACPI: SSDT 000e80b0 0019B (v01 COMPAQ CORE_UTL 00000001 MSFT 0100000E) [ 0.000000] ACPI: SSDT 000e824b 00308 (v01 COMPAQ VILLTBL1 00000001 MSFT 0100000E) [ 0.000000] ACPI: SSDT 000e8553 0053F (v01 COMPAQ LGCYLITE 00000001 MSFT 0100000E) [ 0.000000] ACPI: SSDT 000e8a92 00167 (v01 COMPAQ UART2 00000001 MSFT 0100000E) [ 0.000000] ACPI: SSDT 000e8bf9 0014E (v01 COMPAQ FLOPPY 00000001 MSFT 0100000E) [ 0.000000] ACPI: APIC 000e686c 0005A (v01 COMPAQ BROOKDG 00000001 00000000) [ 0.000000] ACPI: SSDT 000ea6be 000B2 (v01 COMPAQ APIC 00000001 MSFT 0100000E) [ 0.000000] ACPI: SSDT 000e91b5 00424 (v01 COMPAQ PNP_PRSS 00000001 MSFT 0100000E) [ 0.000000] ACPI: SSDT 000e95d9 0016D (v01 COMPAQ UR2_PRSS 00000001 MSFT 0100000E) [ 0.000000] ACPI: SSDT 000e9746 00119 (v01 COMPAQ FPY_PRSS 00000001 MSFT 0100000E) [ 0.000000] ACPI: SSDT 000e98f7 00135 (v01 COMPAQ S3 00000001 MSFT 0100000E) [ 0.000000] ACPI: SSDT 000e9a2c 0013B (v01 COMPAQ CORE_S3 00000001 MSFT 0100000E) [ 0.000000] ACPI: SSDT 000e9b67 00173 (v01 COMPAQ PIDETM 00000001 MSFT 0100000E) [ 0.000000] ACPI: SSDT 000e9e52 00180 (v01 COMPAQ GTF0 00000001 MSFT 0100000E) [ 0.000000] ACPI: SSDT 000e9cda 00178 (v01 COMPAQ SIDETM 00000001 MSFT 0100000E) [ 0.000000] ACPI: SSDT 000ea157 00185 (v01 COMPAQ GTF2 00000001 MSFT 0100000E) [ 0.000000] ACPI: SSDT 000ea461 000F0 (v01 COMPAQ L08 00000001 MSFT 0100000E) [ 0.000000] ACPI: SSDT 000ea859 00053 (v01 COMPAQ FINIS 00000001 MSFT 0100000E) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 400MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 19000000 [ 0.000000] low ram: 0 - 19000000 [ 0.000000] node 0 low ram: 00000000 - 19000000 [ 0.000000] node 0 bootmap 00008000 - 0000b200 [ 0.000000] (14 early reservations) ==> bootmem [0000000000 - 0019000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0001000000 - 00014b1348] TEXT DATA BSS ==> [0001000000 - 00014b1348] [ 0.000000] #3 [00187e7000 - 0018fff135] RAMDISK ==> [00187e7000 - 0018fff135] [ 0.000000] #4 [00014b2000 - 00014b80d4] BRK ==> [00014b2000 - 00014b80d4] [ 0.000000] #5 [00000f9c00 - 0000100000] BIOS reserved ==> [00000f9c00 - 0000100000] [ 0.000000] #6 [00000f9bf0 - 00000f9c00] MP-table mpf ==> [00000f9bf0 - 00000f9c00] [ 0.000000] #7 [000009fc00 - 00000ed7f0] BIOS reserved ==> [000009fc00 - 00000ed7f0] [ 0.000000] #8 [00000ed9b0 - 00000f9bf0] BIOS reserved ==> [00000ed9b0 - 00000f9bf0] [ 0.000000] #9 [00000ed7f0 - 00000ed9b0] MP-table mpc ==> [00000ed7f0 - 00000ed9b0] [ 0.000000] #10 [0000002000 - 0000003000] TRAMPOLINE ==> [0000002000 - 0000003000] [ 0.000000] #11 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000] [ 0.000000] #12 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #13 [0000008000 - 000000c000] BOOTMAP ==> [0000008000 - 000000c000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x00019000 [ 0.000000] HighMem 0x00019000 -> 0x00019000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x00019000 [ 0.000000] On node 0 totalpages: 102303 [ 0.000000] free_area_init_node: node 0, pgdat c139d1c0, node_mem_map c14ba000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3967 pages, LIFO batch:0 [ 0.000000] Normal zone: 768 pages used for memmap [ 0.000000] Normal zone: 97536 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0xf808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 1f800000 (gap: 1f800000:df400000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s34328 r0 d23016 u4194304 [ 0.000000] pcpu-alloc: s34328 r0 d23016 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 101503 [ 0.000000] Kernel command line: auto BOOT_IMAGE=linux ro root=802 devfs=nomount mem=400M i915.modeset=0 i915.powersave=0 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 392284k/409600k available (2441k kernel code, 16828k reserved, 1300k data, 372k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB) [ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.000000] vmalloc : 0xd9800000 - 0xff3fe000 ( 603 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd9000000 ( 400 MB) [ 0.000000] .init : 0xc13a8000 - 0xc1405000 ( 372 kB) [ 0.000000] .data : 0xc12624e1 - 0xc13a766c (1300 kB) [ 0.000000] .text : 0xc1000000 - 0xc12624e1 (2441 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:1280 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2524.533 MHz processor. [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5049.06 BogoMIPS (lpj=10098132) [ 0.004127] Security Framework initialized [ 0.004181] SELinux: Disabled at boot. [ 0.004237] Mount-cache hash table entries: 512 [ 0.004464] Initializing cgroup subsys ns [ 0.004518] Initializing cgroup subsys cpuacct [ 0.004571] Initializing cgroup subsys devices [ 0.004623] Initializing cgroup subsys freezer [ 0.004673] Initializing cgroup subsys net_cls [ 0.004754] CPU0: Hyper-Threading is disabled [ 0.004808] mce: CPU supports 4 MCE banks [ 0.004869] CPU0: Thermal monitoring enabled (TM1) [ 0.004933] Performance Events: no PMU driver, software events only. [ 0.005024] Checking 'hlt' instruction... OK. [ 0.020531] SMP alternatives: switching to UP code [ 0.027180] Freeing SMP alternatives: 13k freed [ 0.027252] ACPI: Core revision 20091214 [ 0.031333] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.031917] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.071658] CPU0: Intel(R) Pentium(R) 4 CPU 2.53GHz stepping 07 [ 0.072000] Brought up 1 CPUs [ 0.072000] Total of 1 processors activated (5049.06 BogoMIPS). [ 0.072000] devtmpfs: initialized [ 0.072000] regulator: core version 0.5 [ 0.072000] NET: Registered protocol family 16 [ 0.072000] ACPI: bus type pci registered [ 0.072000] PCI: PCI BIOS revision 2.20 entry at 0xeca48, last bus=5 [ 0.072000] PCI: Using configuration type 1 for base access [ 0.072000] bio: create slab <bio-0> at 0 [ 0.072000] ACPI: EC: Look up EC in DSDT [ 0.073611] ACPI: Interpreter enabled [ 0.076009] ACPI: (supports S0 S1 S3 S4 S5) [ 0.076249] ACPI: Using IOAPIC for interrupt routing [ 0.080483] ACPI: No dock devices found. [ 0.080676] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.080757] pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them [ 0.081066] pci_root PNP0A03:00: host bridge window [mem 0x1f900000-0xfebfffff] (ignored) [ 0.081072] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.081076] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.081079] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.081107] pci 0000:00:00.0: reg 10: [mem 0xf8000000-0xfbffffff pref] [ 0.081180] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf7ffffff pref] [ 0.081188] pci 0000:00:02.0: reg 14: [mem 0xfc400000-0xfc47ffff] [ 0.081299] pci 0000:00:1d.0: reg 20: [io 0x2440-0x245f] [ 0.081357] pci 0000:00:1d.1: reg 20: [io 0x2460-0x247f] [ 0.081415] pci 0000:00:1d.7: reg 10: [mem 0xfc480000-0xfc4803ff] [ 0.081474] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.081481] pci 0000:00:1d.7: PME# disabled [ 0.081536] * The chipset may have PM-Timer Bug. Due to workarounds for a bug, [ 0.081538] * this clock source is slow. If you are sure your timer does not have [ 0.081540] * this bug, please use "acpi_pm_good" to disable the workaround [ 0.081755] pci 0000:00:1f.0: Enabled i801 SMBus device [ 0.081811] pci 0000:00:1f.0: quirk: [io 0xf800-0xf87f] claimed by ICH4 ACPI/GPIO/TCO [ 0.081876] pci 0000:00:1f.0: quirk: [io 0xfa00-0xfa3f] claimed by ICH4 GPIO [ 0.081954] pci 0000:00:1f.1: reg 10: [io 0x24b0-0x24b7] [ 0.081962] pci 0000:00:1f.1: reg 14: [io 0x24c0-0x24c3] [ 0.081969] pci 0000:00:1f.1: reg 18: [io 0x24b8-0x24bf] [ 0.081977] pci 0000:00:1f.1: reg 1c: [io 0x24c4-0x24c7] [ 0.081984] pci 0000:00:1f.1: reg 20: [io 0x24a0-0x24af] [ 0.081992] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff] [ 0.082047] pci 0000:00:1f.3: reg 20: [io 0xfc00-0xfc1f] [ 0.082093] pci 0000:00:1f.5: reg 10: [io 0x2000-0x20ff] [ 0.082101] pci 0000:00:1f.5: reg 14: [io 0x2400-0x243f] [ 0.082108] pci 0000:00:1f.5: reg 18: [mem 0xfc480400-0xfc4805ff] [ 0.082116] pci 0000:00:1f.5: reg 1c: [mem 0xfc480600-0xfc4806ff] [ 0.082147] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.082153] pci 0000:00:1f.5: PME# disabled [ 0.082203] pci 0000:05:08.0: reg 10: [mem 0xfc500000-0xfc500fff] [ 0.082211] pci 0000:05:08.0: reg 14: [io 0x1000-0x103f] [ 0.082249] pci 0000:05:08.0: supports D1 D2 [ 0.082252] pci 0000:05:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.082256] pci 0000:05:08.0: PME# disabled [ 0.082290] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode) [ 0.082346] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff] [ 0.082352] pci 0000:00:1e.0: bridge window [mem 0xfc500000-0xfc7fffff] [ 0.082364] pci_bus 0000:00: on NUMA node 0 [ 0.082371] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.082515] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] [ 0.086813] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 14 15) [ 0.087299] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15) [ 0.087781] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 0.088332] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15) [ 0.088814] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15) [ 0.089295] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 0.089852] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 0.090410] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 14 15) [ 0.090950] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.091020] vgaarb: loaded [ 0.091184] PCI: Using ACPI for IRQ routing [ 0.091369] PCI: pci_cache_line_size set to 64 bytes [ 0.091556] Switching to clocksource tsc [ 0.091975] pnp: PnP ACPI init [ 0.091975] ACPI: bus type pnp registered [ 0.092623] pnp 00:0d: disabling [io 0xf800-0xf81f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f] [ 0.092696] pnp 00:0d: disabling [io 0xf820-0xf83f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f] [ 0.092765] pnp 00:0d: disabling [io 0xf840-0xf85f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f] [ 0.092835] pnp 00:0d: disabling [io 0xf860-0xf87f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f] [ 0.093371] pnp: PnP ACPI: found 15 devices [ 0.093422] ACPI: ACPI bus type pnp unregistered [ 0.093474] PnPBIOS: Disabled by ACPI PNP [ 0.093540] system 00:0c: [io 0x04d0-0x04d1] has been reserved [ 0.093598] system 00:0d: [io 0x0400-0x041f] has been reserved [ 0.093652] system 00:0d: [io 0x0420-0x043f] has been reserved [ 0.093705] system 00:0d: [io 0x0440-0x045f] has been reserved [ 0.093758] system 00:0d: [io 0x0460-0x047f] has been reserved [ 0.093811] system 00:0d: [io 0xfa00-0xfa3f] has been reserved [ 0.093864] system 00:0d: [io 0xfc00-0xfc7f] could not be reserved [ 0.093916] system 00:0d: [io 0xfc80-0xfcff] has been reserved [ 0.093970] system 00:0d: [io 0xfe00-0xfe7f] has been reserved [ 0.094022] system 00:0d: [io 0xfe80-0xfeff] has been reserved [ 0.094079] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.094135] system 00:0e: [mem 0x00100000-0x1f7fffff] could not be reserved [ 0.094190] system 00:0e: [mem 0x1f800000-0x1f8fffff] has been reserved [ 0.094244] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.094299] system 00:0e: [mem 0xfec01000-0xffffffff] has been reserved [ 0.094352] system 00:0e: [mem 0x000cc400-0x000dffff] has been reserved [ 0.129296] pci 0000:00:1f.1: BAR 5: assigned [mem 0x1f900000-0x1f9003ff] [ 0.129356] pci 0000:00:1f.1: BAR 5: set to [mem 0x1f900000-0x1f9003ff] (PCI address [0x1f900000-0x1f9003ff] [ 0.129424] pci 0000:00:1e.0: PCI bridge to [bus 05-05] [ 0.129477] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff] [ 0.129533] pci 0000:00:1e.0: bridge window [mem 0xfc500000-0xfc7fffff] [ 0.129587] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 0.129654] pci 0000:00:1e.0: setting latency timer to 64 [ 0.129659] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.129663] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] [ 0.129666] pci_bus 0000:05: resource 0 [io 0x1000-0x1fff] [ 0.129670] pci_bus 0000:05: resource 1 [mem 0xfc500000-0xfc7fffff] [ 0.129673] pci_bus 0000:05: resource 3 [io 0x0000-0xffff] [ 0.129677] pci_bus 0000:05: resource 4 [mem 0x00000000-0xffffffff] [ 0.129712] NET: Registered protocol family 2 [ 0.129837] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.130139] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.130328] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 0.130498] TCP: Hash tables configured (established 16384 bind 16384) [ 0.130551] TCP reno registered [ 0.130599] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.130661] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.130801] NET: Registered protocol family 1 [ 0.130874] pci 0000:00:02.0: Boot video device [ 0.130964] pci 0000:05:08.0: Firmware left e100 interrupts enabled; disabling [ 0.131032] PCI: CLS 64 bytes, default 64 [ 0.131114] Unpacking initramfs... [ 0.497392] Freeing initrd memory: 8288k freed [ 0.515415] audit: initializing netlink socket (disabled) [ 0.515501] type=2000 audit(1269260568.512:1): initialized [ 0.515795] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.517728] VFS: Disk quotas dquot_6.5.2 [ 0.517843] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.517994] msgmni has been set to 782 [ 0.518300] alg: No test for stdrng (krng) [ 0.518424] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.518489] io scheduler noop registered [ 0.518539] io scheduler deadline registered [ 0.518674] io scheduler cfq registered (default) [ 0.518932] isapnp: Scanning for PnP cards... [ 0.872894] isapnp: No Plug & Play device found [ 0.874823] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.874994] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.875163] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.875568] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.875762] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.876025] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 [ 0.878904] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.878961] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.879155] mice: PS/2 mouse device common for all mice [ 0.879272] rtc_cmos 00:03: RTC can wake from S4 [ 0.879374] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.879450] rtc0: alarms up to one month, y3k, 114 bytes nvram [ 0.879517] cpuidle: using governor ladder [ 0.879566] cpuidle: using governor menu [ 0.879619] No iBFT detected. [ 0.880006] TCP cubic registered [ 0.880214] NET: Registered protocol family 10 [ 0.880719] lo: Disabled Privacy Extensions [ 0.881035] Mobile IPv6 [ 0.881084] NET: Registered protocol family 17 [ 0.881155] Using IPI No-Shortcut mode [ 0.881306] PM: Resume from disk failed. [ 0.881316] registered taskstats version 1 [ 0.881561] rtc_cmos 00:03: setting system clock to 2010-03-22 12:22:49 UTC (1269260569) [ 0.881673] Freeing unused kernel memory: 372k freed [ 0.882322] Write protecting the kernel text: 2444k [ 0.882391] Write protecting the kernel read-only data: 896k [ 1.215495] usbcore: registered new interface driver usbfs [ 1.215717] usbcore: registered new interface driver hub [ 1.238720] Linux agpgart interface v0.103 [ 1.238845] usbcore: registered new device driver usb [ 1.247824] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.247933] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 1.255509] Floppy drive(s): fd0 is 1.44M [ 1.256118] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.256201] ACPI: Power Button [PBTN] [ 1.256450] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.256519] ACPI: Power Button [PWRF] [ 1.257184] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.257191] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.257288] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.257395] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.261316] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 1.262079] SCSI subsystem initialized [ 1.272770] FDC 0 is a post-1991 82077 [ 1.276716] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.276776] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.276887] e100 0000:05:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.363518] e100 0000:05:08.0: PME# disabled [ 1.398638] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc480000 [ 1.409385] libata version 3.00 loaded. [ 1.413711] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.413820] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.413879] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.413943] usb usb1: Product: EHCI Host Controller [ 1.413993] usb usb1: Manufacturer: Linux 2.6.33-2-686 ehci_hcd [ 1.414045] usb usb1: SerialNumber: 0000:00:1d.7 [ 1.414277] hub 1-0:1.0: USB hub found [ 1.414333] hub 1-0:1.0: 6 ports detected [ 1.414753] agpgart-intel 0000:00:00.0: Intel 830M Chipset [ 1.415013] agpgart-intel 0000:00:00.0: detected 8060K stolen memory [ 1.417520] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xf0000000 [ 1.446443] ata_piix 0000:00:1f.1: version 2.13 [ 1.446467] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) [ 1.446543] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.446686] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 1.448979] scsi0 : ata_piix [ 1.451448] scsi1 : ata_piix [ 1.451899] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x24a0 irq 14 [ 1.451955] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x24a8 irq 15 [ 1.453075] [drm] Initialized drm 1.1.0 20060810 [ 1.453802] e100: eth0: e100_probe: addr 0xfc500000, irq 20, MAC addr 00:0b:cd:c4:54:2a [ 1.470721] uhci_hcd: USB Universal Host Controller Interface driver [ 1.470863] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.470926] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.470931] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.471011] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.471119] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00002440 [ 1.471224] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.471279] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.473890] usb usb2: Product: UHCI Host Controller [ 1.473941] usb usb2: Manufacturer: Linux 2.6.33-2-686 uhci_hcd [ 1.473993] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.474366] hub 2-0:1.0: USB hub found [ 1.474422] hub 2-0:1.0: 2 ports detected [ 1.474541] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.474603] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.474608] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.474667] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.474764] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002460 [ 1.474863] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.474917] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.474981] usb usb3: Product: UHCI Host Controller [ 1.475031] usb usb3: Manufacturer: Linux 2.6.33-2-686 uhci_hcd [ 1.475082] usb usb3: SerialNumber: 0000:00:1d.1 [ 1.475377] hub 3-0:1.0: USB hub found [ 1.475434] hub 3-0:1.0: 2 ports detected [ 1.608514] ata2.00: ATAPI: LTN486S, YQSM, max MWDMA2 [ 1.624202] ata2.00: configured for MWDMA2 [ 1.672474] ata1.00: ATA-6: ST340014A, 3.06, max UDMA/100 [ 1.672528] ata1.00: 78165360 sectors, multi 16: LBA48 [ 1.688368] ata1.00: configured for UDMA/100 [ 1.688566] scsi 0:0:0:0: Direct-Access ATA ST340014A 3.06 PQ: 0 ANSI: 5 [ 1.689378] scsi 1:0:0:0: CD-ROM LITEON CD-ROM LTN486S YQSM PQ: 0 ANSI: 5 [ 1.742463] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.742528] pci 0000:00:02.0: setting latency timer to 64 [ 1.751961] sd 0:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB) [ 1.752127] sd 0:0:0:0: [sda] Write Protect is off [ 1.752178] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.752209] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.752481] sda: [ 1.755005] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 1.757416] sda1 sda2 [ 1.758116] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray [ 1.758173] Uniform CD-ROM driver Revision: 3.20 [ 1.758362] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.758820] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.775759] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.777042] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.941824] device-mapper: uevent: version 1.0.3 [ 1.942550] device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel@redhat.com [ 1.972031] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 2.044290] kjournald starting. Commit interval 5 seconds [ 2.044359] EXT3-fs (sda2): mounted filesystem with ordered data mode [ 2.144237] usb 2-1: New USB device found, idVendor=046d, idProduct=c404 [ 2.144299] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.144353] usb 2-1: Product: Trackball [ 2.144403] usb 2-1: Manufacturer: Logitech [ 2.384049] usb 2-2: new low speed USB device using uhci_hcd and address 3 [ 2.565203] usb 2-2: New USB device found, idVendor=04b3, idProduct=3025 [ 2.565263] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.565317] usb 2-2: Product: USB NetVista Full Width Keyboard. [ 2.565368] usb 2-2: Manufacturer: LITE-ON Technology [ 3.727236] udev: starting version 151 [ 4.763289] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 5.006475] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 5.127716] parport_pc 00:07: reported by Plug and Play ACPI [ 5.127827] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] [ 5.425355] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 5.471208] intel_rng: Firmware space is locked read-only. If you can't or [ 5.471211] intel_rng: don't want to disable this in firmware setup, and if [ 5.471213] intel_rng: you are certain that your system has a functional [ 5.471215] intel_rng: RNG, try using the 'no_fwh_detect' option. [ 5.657472] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 5.657595] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 5.766436] usbcore: registered new interface driver hiddev [ 5.785966] input: Logitech Trackball as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input2 [ 5.786326] generic-usb 0003:046D:C404.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:1d.0-1/input0 [ 5.802328] input: LITE-ON Technology USB NetVista Full Width Keyboard. as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input3 [ 5.803692] generic-usb 0003:04B3:3025.0002: input,hidraw1: USB HID v1.10 Keyboard [LITE-ON Technology USB NetVista Full Width Keyboard.] on usb-0000:00:1d.0-2/input0 [ 5.804101] usbcore: registered new interface driver usbhid [ 5.804166] usbhid: USB HID core driver [ 6.032023] intel8x0_measure_ac97_clock: measured 54689 usecs (2634 samples) [ 6.032085] intel8x0: clocking to 48000 [ 6.768242] Adding 1048568k swap on /dev/sda1. Priority:-1 extents:1 across:1048568k [ 6.963277] EXT3-fs (sda2): using internal journal [ 7.072621] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 8.040953] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8.044153] e100: eth0 NIC Link is Up 100 Mbps Full Duplex [ 8.044326] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 8.921618] RPC: Registered udp transport module. [ 8.921676] RPC: Registered tcp transport module. [ 8.921726] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 8.968453] Slow work thread pool: Starting up [ 8.968582] Slow work thread pool: Ready [ 8.968719] FS-Cache: Loaded [ 9.034886] FS-Cache: Netfs 'nfs' registered for caching [ 10.881890] svc: failed to register lockdv1 RPC service (errno 97). [ 12.855352] lp0: using parport0 (interrupt-driven). [ 12.881647] ppdev: user-space parallel port driver [ 18.928011] eth0: no IPv6 routers present [ 4345.716012] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [ 4345.716027] render error detected, EIR: 0x00000000 [ 4345.716045] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 245106 at 245105) [ 4348.220013] [drm:i915_gem_idle] *ERROR* hardware wedged [ 4357.031224] [drm:i915_gem_entervt_ioctl] *ERROR* Reenabling wedged hardware, good luck [ 4357.380008] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [ 4357.380017] render error detected, EIR: 0x00000000 [ 4357.380673] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 245109 at 245105) [ 4359.236011] [drm:i915_gem_idle] *ERROR* hardware wedged
X.Org X Server 1.7.5 Release Date: 2010-02-16 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.32-trunk-686 i686 Debian Current Operating System: Linux newfai 2.6.33-2-686 #1 SMP Thu Mar 18 07:30:30 UTC 2010 i686 Kernel command line: auto BOOT_IMAGE=linux ro root=802 devfs=nomount mem=400M i915.modeset=0 i915.powersave=0 Build Date: 16 February 2010 08:37:23AM xorg-server 2:1.7.5-1 (bgoglin@debian.org) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 22 14:35:23 2010 (II) Loader magic: 0x81e7020 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 6.0 X.Org XInput driver : 7.0 X.Org Server Extension : 2.0 (++) using VT number 7 (--) PCI:*(0:0:2:0) 8086:2562:0e11:00b8 Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device rev 1, Mem @ 0xf0000000/134217728, 0xfc400000/524288 (==) Using default built-in configuration (30 lines) (==) --- Start of built-in configuration --- Section "Device" Identifier "Builtin Default intel Device 0" Driver "intel" EndSection Section "Screen" Identifier "Builtin Default intel Screen 0" Device "Builtin Default intel Device 0" EndSection Section "Device" Identifier "Builtin Default vesa Device 0" Driver "vesa" EndSection Section "Screen" Identifier "Builtin Default vesa Screen 0" Device "Builtin Default vesa Device 0" EndSection Section "Device" Identifier "Builtin Default fbdev Device 0" Driver "fbdev" EndSection Section "Screen" Identifier "Builtin Default fbdev Screen 0" Device "Builtin Default fbdev Device 0" EndSection Section "ServerLayout" Identifier "Builtin Default Layout" Screen "Builtin Default intel Screen 0" Screen "Builtin Default vesa Screen 0" Screen "Builtin Default fbdev Screen 0" EndSection (==) --- End of built-in configuration --- (==) ServerLayout "Builtin Default Layout" (**) |-->Screen "Builtin Default intel Screen 0" (0) (**) | |-->Monitor "<default monitor>" (**) | |-->Device "Builtin Default intel Device 0" (==) No monitor specified for screen "Builtin Default intel Screen 0". Using a default monitor configuration. (**) |-->Screen "Builtin Default vesa Screen 0" (1) (**) | |-->Monitor "<default monitor>" (**) | |-->Device "Builtin Default vesa Device 0" (==) No monitor specified for screen "Builtin Default vesa Screen 0". Using a default monitor configuration. (**) |-->Screen "Builtin Default fbdev Screen 0" (2) (**) | |-->Monitor "<default monitor>" (**) | |-->Device "Builtin Default fbdev Device 0" (==) No monitor specified for screen "Builtin Default fbdev Screen 0". Using a default monitor configuration. (==) Automatically adding devices (==) Automatically enabling devices (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, built-ins (==) ModulePath set to "/usr/lib/xorg/modules" (II) Cannot locate a core pointer device. (II) Cannot locate a core keyboard device. (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.7.5, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension SELinux (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.7.5, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions/libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.7.5, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.7.5, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.7.5, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.7.5, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "intel" (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.7.3.902, module version = 2.9.1 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 6.0 (II) LoadModule: "vesa" (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so (II) Module vesa: vendor="X.Org Foundation" compiled for 1.7.4, module version = 2.3.0 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 6.0 (II) LoadModule: "fbdev" (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so (II) Module fbdev: vendor="X.Org Foundation" compiled for 1.7.3.902, module version = 0.4.1 ABI class: X.Org Video Driver, version 6.0 (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale (II) VESA: driver for VESA chipsets: vesa (II) FBDEV: driver for framebuffer: fbdev (II) Primary Device is: PCI 00@00:02:0 (WW) Falling back to old probe method for vesa (WW) Falling back to old probe method for fbdev (II) Loading sub module "fbdevhw" (II) LoadModule: "fbdevhw" (II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so (II) Module fbdevhw: vendor="X.Org Foundation" compiled for 1.7.5, module version = 0.0.2 ABI class: X.Org Video Driver, version 6.0 (EE) open /dev/fb0: No such file or directory (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules/libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.7.5, module version = 0.1.0 ABI class: X.Org Video Driver, version 6.0 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 8, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 8, (OK) drmOpenByBusid: drmOpenMinor returns 8 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) intel(0): Creating default Display subsection in Screen section "Builtin Default intel Screen 0" for depth/fbbpp 24/32 (==) intel(0): Depth 24, (--) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (II) intel(0): Integrated Graphics Chipset: Intel(R) 845G (--) intel(0): Chipset: "845G" (--) intel(0): Linear framebuffer at 0xF0000000 (--) intel(0): IO registers at addr 0xFC400000 size 524288 (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB (II) intel(0): No SDVO device is found in VBT (II) intel(0): 1 display pipe available. (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) intel(0): Output VGA has no monitor section (II) intel(0): I2C bus "DVODDC_D" initialized. (II) Loading sub module "sil164" (II) LoadModule: "sil164" (II) Loading /usr/lib/xorg/modules/drivers/sil164.so (II) Module sil164: vendor="X.Org Foundation" compiled for 1.7.3.902, module version = 1.0.0 ABI class: X.Org Video Driver, version 6.0 (II) intel(0): I2C bus "DVOI2C_E" initialized. (II) Loading sub module "ch7xxx" (II) LoadModule: "ch7xxx" (II) Loading /usr/lib/xorg/modules/drivers/ch7xxx.so (II) Module ch7xxx: vendor="X.Org Foundation" compiled for 1.7.3.902, module version = 1.0.0 ABI class: X.Org Video Driver, version 6.0 (II) intel(0): I2C bus "DVOI2C_E" removed. (II) intel(0): I2C bus "DVOI2C_E" initialized. (II) Loading sub module "ivch" (II) LoadModule: "ivch" (II) Loading /usr/lib/xorg/modules/drivers/ivch.so (II) Module ivch: vendor="X.Org Foundation" compiled for 1.7.3.902, module version = 1.0.0 ABI class: X.Org Video Driver, version 6.0 (II) intel(0): I2C bus "DVOI2C_E" removed. (II) intel(0): I2C bus "DVOI2C_B" initialized. (II) Loading sub module "tfp410" (II) LoadModule: "tfp410" (II) Loading /usr/lib/xorg/modules/drivers/tfp410.so (II) Module tfp410: vendor="X.Org Foundation" compiled for 1.7.3.902, module version = 1.0.0 ABI class: X.Org Video Driver, version 6.0 (II) intel(0): I2C bus "DVOI2C_B" removed. (II) intel(0): I2C bus "DVOI2C_E" initialized. (II) Loading sub module "ch7017" (II) LoadModule: "ch7017" (II) Loading /usr/lib/xorg/modules/drivers/ch7017.so (II) Module ch7017: vendor="X.Org Foundation" compiled for 1.7.3.902, module version = 1.0.0 ABI class: X.Org Video Driver, version 6.0 (II) intel(0): I2C bus "DVOI2C_E" removed. (II) intel(0): I2C bus "DVOI2C_E" initialized. (II) intel(0): I2C bus "DVOI2C_E" removed. (II) intel(0): I2C bus "DVODDC_D" removed. (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:DDC control interface" registered at address 0x6E. (II) intel(0): I2C device "CRTDDC_A:DDC control interface" removed. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID for output VGA (II) intel(0): Manufacturer: SAM Model: 351 Serial#: 1297691184 (II) intel(0): Year: 2009 Week: 24 (II) intel(0): EDID Version: 1.3 (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V (II) intel(0): Sync: Separate Composite SyncOnGreen (II) intel(0): Max Image Size [cm]: horiz.: 43 vert.: 27 (II) intel(0): Gamma: 2.20 (II) intel(0): DPMS capabilities: Off; RGB/Color Display (II) intel(0): First detailed timing is preferred mode (II) intel(0): redX: 0.649 redY: 0.338 greenX: 0.289 greenY: 0.609 (II) intel(0): blueX: 0.146 blueY: 0.070 whiteX: 0.312 whiteY: 0.329 (II) intel(0): Supported established timings: (II) intel(0): 720x400@70Hz (II) intel(0): 640x480@60Hz (II) intel(0): 640x480@67Hz (II) intel(0): 640x480@72Hz (II) intel(0): 640x480@75Hz (II) intel(0): 800x600@56Hz (II) intel(0): 800x600@60Hz (II) intel(0): 800x600@72Hz (II) intel(0): 800x600@75Hz (II) intel(0): 832x624@75Hz (II) intel(0): 1024x768@60Hz (II) intel(0): 1024x768@70Hz (II) intel(0): 1024x768@75Hz (II) intel(0): 1280x1024@75Hz (II) intel(0): 1152x864@75Hz (II) intel(0): Manufacturer's mask: 0 (II) intel(0): Supported standard timings: (II) intel(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179 (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) intel(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513 (II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337 (II) intel(0): Supported detailed timing: (II) intel(0): clock: 119.0 MHz Image Size: 459 x 296 mm (II) intel(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0 (II) intel(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0 (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 140 MHz (II) intel(0): Monitor name: SyncMaster (II) intel(0): Serial No: HMCS603235 (II) intel(0): EDID (in hex): (II) intel(0): 00ffffffffffff004c2d51033032594d (II) intel(0): 181301030e2b1b782a6041a6564a9c25 (II) intel(0): 125054bfef80b30081808140714f0101 (II) intel(0): 0101010101017c2e90a0601a1e403020 (II) intel(0): 3600cb281100001a000000fd00384b1e (II) intel(0): 510e000a202020202020000000fc0053 (II) intel(0): 796e634d61737465720a2020000000ff (II) intel(0): 00484d43533630333233350a20200030 (II) intel(0): EDID vendor "SAM", prod id 849 (II) intel(0): Using EDID range info for horizontal sync (II) intel(0): Using EDID range info for vertical refresh (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz) (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) (II) intel(0): EDID vendor "SAM", prod id 849 (II) intel(0): Not using mode "1680x1050" (bad mode clock/interlace/doublescan) (II) intel(0): Printing probed modes for output VGA (II) intel(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz) (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Output VGA connected (II) intel(0): Using exact sizes for initial modes (II) intel(0): Output VGA using initial mode 1680x1050 (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. (II) intel(0): detected 128 kB GTT. (II) intel(0): detected 8060 kB stolen memory. (==) intel(0): video overlay key set to 0x101fe (**) intel(0): Display dimensions: (430, 270) mm (**) intel(0): DPI set to (99, 98) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.7.5, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) intel(0): Comparing regs from server start up to After PreInit (WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000207 to 0x80000207 (WW) intel(0): PIPEASTAT before: status: VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS (WW) intel(0): PIPEASTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS (II) UnloadModule: "vesa" (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so (II) UnloadModule: "fbdev" (II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so (II) UnloadModule: "fbdevhw" (II) Unloading /usr/lib/xorg/modules/linux/libfbdevhw.so (==) Depth 24 pixmap format is 32 bpp (II) intel(0): Kernel reported 83968 total, 1 used (II) intel(0): I830CheckAvailableMemory: 335868 kB available (II) intel(0): [DRI2] Setup complete (**) intel(0): Framebuffer compression disabled (**) intel(0): Tiling enabled (**) intel(0): SwapBuffers wait enabled (==) intel(0): VideoRam: 131072 KB (II) intel(0): Attempting memory allocation with tiled buffers. (II) intel(0): Tiled allocation successful. (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) UXA(0): Driver registered support for the following operations: (II) solid (II) copy (II) composite (RENDER acceleration) (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): Initializing HW Cursor (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x07fff000 (pgoffset 32767) (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x007df000: end of stolen memory (II) intel(0): 0x007df000-0x07ffefff: DRI memory manager (123008 kB) (II) intel(0): 0x07fff000-0x07ffffff: overlay registers (4 kB, 0x0000000018154000 physical ) (II) intel(0): 0x08000000: end of aperture (II) intel(0): BO memory allocation layout: (II) intel(0): 0x007df000: start of memory manager (II) intel(0): 0x01000000-0x01ffffff: front buffer (16384 kB) X tiled (II) intel(0): 0x00800000-0x00804fff: HW cursors (20 kB) (II) intel(0): 0x07fff000: end of memory manager (II) intel(0): Output configuration: (II) intel(0): Pipe A is on (II) intel(0): Display plane A is now enabled and connected to pipe A. (II) intel(0): Output VGA is connected to pipe A (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. (==) intel(0): DPMS enabled (==) intel(0): Intel XvMC decoder disabled (II) intel(0): Set up overlay video (II) intel(0): direct rendering: DRI2 Enabled (--) RandR disabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE SELinux: Disabled on system, not enabling in X server record: RECORD extension enabled at configure time. record: This extension is known to be broken, disabling extension now.. record: http://bugs.freedesktop.org/show_bug.cgi?id=20500 (II) AIGLX: enabled GLX_MESA_copy_sub_buffer (II) AIGLX: enabled GLX_SGI_make_current_read (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects (II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so (II) GLX: Initialized DRI2 GL provider for screen 0 (II) intel(0): Setting screen physical size to 444 x 277 Fatal server error: Failed to submit batchbuffer: Input/output error Please consult the The X.Org Foundation support at http://wiki.x.org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. (II) AIGLX: Suspending AIGLX clients for VT switch
Attachment:
signature.asc
Description: This is a digitally signed message part.