Your message dated Sat, 20 Mar 2010 18:35:41 +0000 with message-id <1269110141.18314.94.camel@localhost> and subject line Re: Bug#573610: Acknowledgement (linux-image-2.6-686: Bluetooth on EeePC 1005ha not usable) has caused the Debian Bug report #573610, regarding linux-image-2.6-686: Bluetooth on EeePC 1005ha not usable to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 573610: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=573610 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: linux-image-2.6-686: Bluetooth on EeePC 1005ha not usable
- From: wiekaltheut@gmx.de
- Date: Fri, 12 Mar 2010 22:28:25 +0100
- Message-id: <20100312212825.32040@gmx.net>
Subject: linux-image-2.6-686: Bluetooth of EeePC 1005ha not usable Package: linux-image-2.6-686 Severity: important The built-in Bluetooth dongle of the EeePC 1005ha seems to be not usable. If I add acpi_osi="Linux" to the kernel command line, there is a kill switch, but I can not turn the device on. The LED (for WLAN and Bluetooth) is turning on and off, if I try to turn the device on and off. Turning the device on and off in the BIOS seems to have the same effect as with the kill switch. Using an external USB Bluetooth dongle works fine. Any ideas? Thanks. == dmesg == [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-trunk-686 (Debian 2.6.32-5) (ben@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sun Jan 10 06:32:16 UTC 2010 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f7a0000 (usable) [ 0.000000] BIOS-e820: 000000003f7a0000 - 000000003f7ae000 (ACPI data) [ 0.000000] BIOS-e820: 000000003f7ae000 - 000000003f7f0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003f7f0000 - 000000003f800000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x3f7a0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask 0C0000000 write-back [ 0.000000] 1 base 03F800000 mask 0FF800000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] initial memory mapped : 0 - 01800000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037000000 page 2M [ 0.000000] 0037000000 - 00373fe000 page 4k [ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000 [ 0.000000] RAMDISK: 2f10c000 - 2f9f7f2f [ 0.000000] ACPI: RSDP 000fb9e0 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 3f7a0000 00040 (v01 _ASUS_ Notebook 01001005 MSFT 00000097) [ 0.000000] ACPI: FACP 3f7a0200 00084 (v02 A_M_I_ OEMFACP 01001005 MSFT 00000097) [ 0.000000] ACPI: DSDT 3f7a0430 080A2 (v01 A1311 A1311000 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 3f7ae000 00040 [ 0.000000] ACPI: APIC 3f7a0390 0005C (v01 A_M_I_ OEMAPIC 01001005 MSFT 00000097) [ 0.000000] ACPI: MCFG 3f7a03f0 0003C (v01 A_M_I_ OEMMCFG 01001005 MSFT 00000097) [ 0.000000] ACPI: OEMB 3f7ae040 00061 (v01 A_M_I_ AMI_OEM 01001005 MSFT 00000097) [ 0.000000] ACPI: HPET 3f7a84e0 00038 (v01 A_M_I_ OEMHPET 01001005 MSFT 00000097) [ 0.000000] ACPI: SSDT 3f7aeb80 004F0 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: SLIC 3f7a8520 00176 (v01 _ASUS_ Notebook 01001005 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 131MB HIGHMEM available. [ 0.000000] 883MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 373fe000 [ 0.000000] low ram: 0 - 373fe000 [ 0.000000] node 0 low ram: 00000000 - 373fe000 [ 0.000000] node 0 bootmap 00012000 - 00018e80 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0001000000 - 00014a1334] TEXT DATA BSS ==> [0001000000 - 00014a1334] [ 0.000000] #4 [002f10c000 - 002f9f7f2f] RAMDISK ==> [002f10c000 - 002f9f7f2f] [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #6 [00014a2000 - 00014a81e0] BRK ==> [00014a2000 - 00014a81e0] [ 0.000000] #7 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] [ 0.000000] found SMP MP-table at [c00ff780] ff780 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000373fe [ 0.000000] HighMem 0x000373fe -> 0x0003f7a0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003f7a0 [ 0.000000] On node 0 totalpages: 259887 [ 0.000000] free_area_init_node: node 0, pgdat c138edc0, node_mem_map c14aa200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1736 pages used for memmap [ 0.000000] Normal zone: 220470 pages, LIFO batch:31 [ 0.000000] HighMem zone: 264 pages used for memmap [ 0.000000] HighMem zone: 33434 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000 [ 0.000000] PM: Registered nosave memory: 00000000000e2000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 3f800000 (gap: 3f800000:bf600000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2000000 s34072 r0 d23272 u2097152 [ 0.000000] pcpu-alloc: s34072 r0 d23272 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257855 [ 0.000000] Kernel command line: BOOT_IMAGE=//vmlinuz-2.6.32-trunk-686 root=/dev/mapper/neutrino-root ro acpi_osi=Linux quiet [ 0.000000] ACPI: Added _OSI(Linux) [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000373fe:0003f7a0) [ 0.000000] Memory: 1015968k/1040000k available (2414k kernel code, 22992k reserved, 1266k data, 368k init, 134792k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB) [ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) [ 0.000000] .init : 0xc1399000 - 0xc13f5000 ( 368 kB) [ 0.000000] .data : 0xc125bb11 - 0xc1398560 (1266 kB) [ 0.000000] .text : 0xc1000000 - 0xc125bb11 (2414 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:1280 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1599.817 MHz processor. [ 0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.63 BogoMIPS (lpj=6399268) [ 0.004045] Security Framework initialized [ 0.004053] SELinux: Disabled at boot. [ 0.004067] Mount-cache hash table entries: 512 [ 0.004293] Initializing cgroup subsys ns [ 0.004302] Initializing cgroup subsys cpuacct [ 0.004311] Initializing cgroup subsys devices [ 0.004316] Initializing cgroup subsys freezer [ 0.004321] Initializing cgroup subsys net_cls [ 0.004356] CPU: L1 I cache: 32K, L1 D cache: 24K [ 0.004362] CPU: L2 cache: 512K [ 0.004367] CPU: Physical Processor ID: 0 [ 0.004371] CPU: Processor Core ID: 0 [ 0.004378] mce: CPU supports 5 MCE banks [ 0.004392] CPU0: Thermal monitoring enabled (TM2) [ 0.004401] using mwait in idle threads. [ 0.004411] Performance Events: Atom events, Intel PMU driver. [ 0.004424] ... version: 3 [ 0.004428] ... bit width: 40 [ 0.004431] ... generic registers: 2 [ 0.004436] ... value mask: 000000ffffffffff [ 0.004440] ... max period: 000000007fffffff [ 0.004444] ... fixed-purpose events: 3 [ 0.004448] ... event mask: 0000000700000003 [ 0.004456] Checking 'hlt' instruction... OK. [ 0.021586] ACPI: Core revision 20090903 [ 0.040561] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.080997] CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02 [ 0.084001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.008000] Initializing CPU#1 [ 0.008000] Calibrating delay using timer specific routine.. 3199.61 BogoMIPS (lpj=6399234) [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K [ 0.008000] CPU: L2 cache: 512K [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 0 [ 0.008000] CPU1: Thermal monitoring enabled (TM2) [ 0.168121] CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02 [ 0.168149] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.172079] Brought up 2 CPUs [ 0.172086] Total of 2 processors activated (6399.25 BogoMIPS). [ 0.172319] CPU0 attaching sched-domain: [ 0.172328] domain 0: span 0-1 level SIBLING [ 0.172334] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 0.172346] domain 1: span 0-1 level MC [ 0.172351] groups: 0-1 (cpu_power = 1178) [ 0.172362] CPU1 attaching sched-domain: [ 0.172367] domain 0: span 0-1 level SIBLING [ 0.172372] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 0.172383] domain 1: span 0-1 level MC [ 0.172388] groups: 0-1 (cpu_power = 1178) [ 0.172719] devtmpfs: initialized [ 0.173515] regulator: core version 0.5 [ 0.173634] NET: Registered protocol family 16 [ 0.173821] ACPI: bus type pci registered [ 0.173953] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63 [ 0.173960] PCI: Not using MMCONFIG. [ 0.174275] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5 [ 0.174279] PCI: Using configuration type 1 for base access [ 0.175112] bio: create slab <bio-0> at 0 [ 0.176912] ACPI: EC: Look up EC in DSDT [ 0.179116] ACPI: BIOS _OSI(Linux) query honored via cmdline [ 0.179306] ACPI: Executed 2 blocks of module-level executable AML code [ 0.193850] ACPI: Interpreter enabled [ 0.193868] ACPI: (supports S0 S3 S4 S5) [ 0.193918] ACPI: Using IOAPIC for interrupt routing [ 0.194016] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63 [ 0.197928] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.197933] PCI: Using MMCONFIG for extended config space [ 0.210312] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 0.210747] ACPI: No dock devices found. [ 0.210994] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.211137] pci 0000:00:02.0: reg 10 32bit mmio: [0xf7e00000-0xf7e7ffff] [ 0.211147] pci 0000:00:02.0: reg 14 io port: [0xdc00-0xdc07] [ 0.211156] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff] [ 0.211165] pci 0000:00:02.0: reg 1c 32bit mmio: [0xf7dc0000-0xf7dfffff] [ 0.211217] pci 0000:00:02.1: reg 10 32bit mmio: [0xf7e80000-0xf7efffff] [ 0.211355] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf7db8000-0xf7dbbfff] [ 0.211430] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.211439] pci 0000:00:1b.0: PME# disabled [ 0.211553] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.211561] pci 0000:00:1c.0: PME# disabled [ 0.211678] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.211686] pci 0000:00:1c.1: PME# disabled [ 0.211804] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.211812] pci 0000:00:1c.3: PME# disabled [ 0.211894] pci 0000:00:1d.0: reg 20 io port: [0xd400-0xd41f] [ 0.211976] pci 0000:00:1d.1: reg 20 io port: [0xd480-0xd49f] [ 0.212071] pci 0000:00:1d.2: reg 20 io port: [0xd800-0xd81f] [ 0.212152] pci 0000:00:1d.3: reg 20 io port: [0xd880-0xd89f] [ 0.212242] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf7db7c00-0xf7db7fff] [ 0.212319] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.212327] pci 0000:00:1d.7: PME# disabled [ 0.212527] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 0.212536] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO [ 0.212544] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0380 (mask 0003) [ 0.212553] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007) [ 0.212561] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0007) [ 0.212650] pci 0000:00:1f.2: reg 10 io port: [0xd080-0xd087] [ 0.212662] pci 0000:00:1f.2: reg 14 io port: [0xd000-0xd003] [ 0.212675] pci 0000:00:1f.2: reg 18 io port: [0xcc00-0xcc07] [ 0.212687] pci 0000:00:1f.2: reg 1c io port: [0xc880-0xc883] [ 0.212699] pci 0000:00:1f.2: reg 20 io port: [0xc800-0xc80f] [ 0.212712] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf7db7800-0xf7db7bff] [ 0.212758] pci 0000:00:1f.2: PME# supported from D3hot [ 0.212766] pci 0000:00:1f.2: PME# disabled [ 0.212944] pci 0000:02:00.0: reg 10 64bit mmio: [0xfbff0000-0xfbffffff] [ 0.213040] pci 0000:02:00.0: supports D1 [ 0.213045] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold [ 0.213054] pci 0000:02:00.0: PME# disabled [ 0.213150] pci 0000:00:1c.1: bridge 32bit mmio: [0xf8000000-0xfbffffff] [ 0.213163] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xf0000000-0xf6ffffff] [ 0.213248] pci 0000:01:00.0: reg 10 64bit mmio: [0xf7fc0000-0xf7ffffff] [ 0.213264] pci 0000:01:00.0: reg 18 io port: [0xec00-0xec7f] [ 0.213356] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.213365] pci 0000:01:00.0: PME# disabled [ 0.213453] pci 0000:00:1c.3: bridge io port: [0xe000-0xefff] [ 0.213462] pci 0000:00:1c.3: bridge 32bit mmio: [0xf7f00000-0xf7ffffff] [ 0.213538] pci 0000:00:1e.0: transparent bridge [ 0.213584] pci_bus 0000:00: on NUMA node 0 [ 0.213598] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.213926] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] [ 0.214022] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] [ 0.236782] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 0.237024] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.237262] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.237500] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.237739] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.237979] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.238220] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.238459] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.238680] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.238700] vgaarb: loaded [ 0.238849] PCI: Using ACPI for IRQ routing [ 0.239220] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.239233] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.244024] Switching to clocksource tsc [ 0.246246] pnp: PnP ACPI init [ 0.246288] ACPI: bus type pnp registered [ 0.250343] pnp: PnP ACPI: found 13 devices [ 0.250350] ACPI: ACPI bus type pnp unregistered [ 0.250359] PnPBIOS: Disabled by ACPI PNP [ 0.250384] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved [ 0.250402] system 00:08: ioport range 0x25c-0x25f has been reserved [ 0.250410] system 00:08: ioport range 0x380-0x383 has been reserved [ 0.250417] system 00:08: ioport range 0x400-0x41f has been reserved [ 0.250424] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 0.250431] system 00:08: ioport range 0x800-0x87f has been reserved [ 0.250438] system 00:08: ioport range 0x480-0x4bf has been reserved [ 0.250446] system 00:08: iomem range 0x8c000000-0x8c01ffff has been reserved [ 0.250454] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.250461] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.250469] system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved [ 0.250476] system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved [ 0.250484] system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved [ 0.250498] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.250505] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.250519] system 00:0b: iomem range 0xe0000000-0xe3ffffff has been reserved [ 0.250532] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.250539] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved [ 0.250546] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved [ 0.250554] system 00:0c: iomem range 0x100000-0x3f7fffff could not be reserved [ 0.285644] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04 [ 0.285653] pci 0000:00:1c.0: IO window: 0x1000-0x1fff [ 0.285664] pci 0000:00:1c.0: MEM window: 0x40000000-0x401fffff [ 0.285674] pci 0000:00:1c.0: PREFETCH window: 0x00000040200000-0x000000403fffff [ 0.285687] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02 [ 0.285694] pci 0000:00:1c.1: IO window: 0x2000-0x2fff [ 0.285704] pci 0000:00:1c.1: MEM window: 0xf8000000-0xfbffffff [ 0.285713] pci 0000:00:1c.1: PREFETCH window: 0x000000f0000000-0x000000f6ffffff [ 0.285726] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:01 [ 0.285733] pci 0000:00:1c.3: IO window: 0xe000-0xefff [ 0.285743] pci 0000:00:1c.3: MEM window: 0xf7f00000-0xf7ffffff [ 0.285752] pci 0000:00:1c.3: PREFETCH window: 0x00000040400000-0x000000405fffff [ 0.285765] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 [ 0.285769] pci 0000:00:1e.0: IO window: disabled [ 0.285778] pci 0000:00:1e.0: MEM window: disabled [ 0.285786] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.285806] pci 0000:00:1c.0: enabling device (0104 -> 0107) [ 0.285824] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.285834] pci 0000:00:1c.0: setting latency timer to 64 [ 0.285849] pci 0000:00:1c.1: enabling device (0106 -> 0107) [ 0.285860] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.285869] pci 0000:00:1c.1: setting latency timer to 64 [ 0.285888] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.285896] pci 0000:00:1c.3: setting latency timer to 64 [ 0.285910] pci 0000:00:1e.0: setting latency timer to 64 [ 0.285919] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.285925] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.285932] pci_bus 0000:04: resource 0 io: [0x1000-0x1fff] [ 0.285938] pci_bus 0000:04: resource 1 mem: [0x40000000-0x401fffff] [ 0.285945] pci_bus 0000:04: resource 2 pref mem [0x40200000-0x403fffff] [ 0.285951] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff] [ 0.285957] pci_bus 0000:02: resource 1 mem: [0xf8000000-0xfbffffff] [ 0.285964] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf6ffffff] [ 0.285970] pci_bus 0000:01: resource 0 io: [0xe000-0xefff] [ 0.285976] pci_bus 0000:01: resource 1 mem: [0xf7f00000-0xf7ffffff] [ 0.285983] pci_bus 0000:01: resource 2 pref mem [0x40400000-0x405fffff] [ 0.285989] pci_bus 0000:05: resource 3 io: [0x00-0xffff] [ 0.285996] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff] [ 0.286061] NET: Registered protocol family 2 [ 0.286247] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.286872] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.287897] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.288392] TCP: Hash tables configured (established 131072 bind 65536) [ 0.288399] TCP reno registered [ 0.288621] NET: Registered protocol family 1 [ 0.288671] pci 0000:00:02.0: Boot video device [ 0.288907] Unpacking initramfs... [ 0.730949] Freeing initrd memory: 9135k freed [ 0.740957] audit: initializing netlink socket (disabled) [ 0.740982] type=2000 audit(1268424696.739:1): initialized [ 0.741304] highmem bounce pool size: 64 pages [ 0.741314] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.744508] VFS: Disk quotas dquot_6.5.2 [ 0.744637] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.744789] msgmni has been set to 1740 [ 0.745192] alg: No test for stdrng (krng) [ 0.745314] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.745322] io scheduler noop registered [ 0.745326] io scheduler anticipatory registered [ 0.745331] io scheduler deadline registered [ 0.745414] io scheduler cfq registered (default) [ 0.745638] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.745656] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.745893] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X [ 0.745909] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.746136] pcieport 0000:00:1c.3: irq 26 for MSI/MSI-X [ 0.746152] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.746474] isapnp: Scanning for PnP cards... [ 1.100220] isapnp: No Plug & Play device found [ 1.103494] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.104292] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.123621] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.123637] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.123869] mice: PS/2 mouse device common for all mice [ 1.123912] Driver 'rtc_cmos' needs updating - please use bus_type methods [ 1.124920] rtc_cmos 00:03: RTC can wake from S4 [ 1.124993] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.125038] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs [ 1.125065] cpuidle: using governor ladder [ 1.125070] cpuidle: using governor menu [ 1.125079] No iBFT detected. [ 1.125878] TCP cubic registered [ 1.126196] NET: Registered protocol family 10 [ 1.127166] lo: Disabled Privacy Extensions [ 1.127863] Mobile IPv6 [ 1.127871] NET: Registered protocol family 17 [ 1.127903] Using IPI No-Shortcut mode [ 1.128106] registered taskstats version 1 [ 1.128701] rtc_cmos 00:03: setting system clock to 2010-03-12 20:11:37 UTC (1268424697) [ 1.128811] Freeing unused kernel memory: 368k freed [ 1.129170] Write protecting the kernel text: 2416k [ 1.129212] Write protecting the kernel read-only data: 872k [ 1.142016] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.372907] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.372925] ACPI: Thermal Zone [TZ00] (54 C) [ 1.481230] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 1.486166] ACPI: Lid Switch [LID] [ 1.486402] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 1.486418] ACPI: Sleep Button [SLPB] [ 1.486610] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 [ 1.486623] ACPI: Power Button [PWRB] [ 1.486816] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 1.486828] ACPI: Power Button [PWRF] [ 1.525395] Linux agpgart interface v0.103 [ 1.666400] usbcore: registered new interface driver usbfs [ 1.666702] usbcore: registered new interface driver hub [ 1.667036] usbcore: registered new device driver usb [ 1.679839] acpi device:22: registered as cooling_device0 [ 1.680647] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 1.680670] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 1.736895] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.736972] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.740706] SCSI subsystem initialized [ 1.744060] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.744071] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.744141] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.744191] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 1.744213] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.748124] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.764259] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7db7c00 [ 1.784033] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.784119] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.784128] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.784137] usb usb1: Product: EHCI Host Controller [ 1.784144] usb usb1: Manufacturer: Linux 2.6.32-trunk-686 ehci_hcd [ 1.784152] usb usb1: SerialNumber: 0000:00:1d.7 [ 1.784572] usb usb1: configuration #1 chosen from 1 choice [ 1.784779] hub 1-0:1.0: USB hub found [ 1.784805] hub 1-0:1.0: 8 ports detected [ 1.820079] agpgart-intel 0000:00:00.0: Intel 945GME Chipset [ 1.820433] agpgart-intel 0000:00:00.0: detected 7932K stolen memory [ 1.823813] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 1.834722] libata version 3.00 loaded. [ 1.895064] [drm] Initialized drm 1.1.0 20060810 [ 1.896083] uhci_hcd: USB Universal Host Controller Interface driver [ 1.896208] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.896229] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.896239] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.896276] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.896329] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400 [ 1.896441] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.896451] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.896459] usb usb2: Product: UHCI Host Controller [ 1.896466] usb usb2: Manufacturer: Linux 2.6.32-trunk-686 uhci_hcd [ 1.896473] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.897683] usb usb2: configuration #1 chosen from 1 choice [ 1.897956] hub 2-0:1.0: USB hub found [ 1.897983] hub 2-0:1.0: 2 ports detected [ 1.898144] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.898164] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.898173] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.898199] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.898265] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480 [ 1.898373] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.898383] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.898391] usb usb3: Product: UHCI Host Controller [ 1.898398] usb usb3: Manufacturer: Linux 2.6.32-trunk-686 uhci_hcd [ 1.898406] usb usb3: SerialNumber: 0000:00:1d.1 [ 1.899386] usb usb3: configuration #1 chosen from 1 choice [ 1.899654] hub 3-0:1.0: USB hub found [ 1.899685] hub 3-0:1.0: 2 ports detected [ 1.899858] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.899877] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.899887] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.899914] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.899978] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800 [ 1.900085] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.900094] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.900102] usb usb4: Product: UHCI Host Controller [ 1.900110] usb usb4: Manufacturer: Linux 2.6.32-trunk-686 uhci_hcd [ 1.900117] usb usb4: SerialNumber: 0000:00:1d.2 [ 1.900529] usb usb4: configuration #1 chosen from 1 choice [ 1.900747] hub 4-0:1.0: USB hub found [ 1.900773] hub 4-0:1.0: 2 ports detected [ 1.900931] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 1.900951] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 1.900961] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 1.900987] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 1.901084] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880 [ 1.901192] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.901201] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.901209] usb usb5: Product: UHCI Host Controller [ 1.901216] usb usb5: Manufacturer: Linux 2.6.32-trunk-686 uhci_hcd [ 1.901224] usb usb5: SerialNumber: 0000:00:1d.3 [ 1.901583] usb usb5: configuration #1 chosen from 1 choice [ 1.901783] hub 5-0:1.0: USB hub found [ 1.901809] hub 5-0:1.0: 2 ports detected [ 1.925046] ahci 0000:00:1f.2: version 3.0 [ 1.925083] ahci 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 1.925173] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X [ 1.925317] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode [ 1.925330] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [ 1.925343] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.938591] scsi0 : ahci [ 1.943105] scsi1 : ahci [ 1.947528] scsi2 : ahci [ 1.947731] scsi3 : ahci [ 1.948418] ata1: SATA max UDMA/133 abar m1024@0xf7db7800 port 0xf7db7900 irq 27 [ 1.948428] ata2: DUMMY [ 1.948433] ata3: DUMMY [ 1.948438] ata4: DUMMY [ 1.969993] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.970003] i915 0000:00:02.0: setting latency timer to 64 [ 1.978153] [drm] set up 7M of stolen space [ 2.100750] integrated sync not supported [ 2.109032] usb 1-2: new high speed USB device using ehci_hcd and address 2 [ 2.265042] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.266398] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 2.277190] usb 1-2: New USB device found, idVendor=13d3, idProduct=5108 [ 2.277198] usb 1-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 2.277205] usb 1-2: Product: USB 2.0 Camera [ 2.277211] usb 1-2: Manufacturer: Sonix Technology Co., Ltd. [ 2.277216] usb 1-2: SerialNumber: SN0001 [ 2.277424] usb 1-2: configuration #1 chosen from 1 choice [ 2.313975] ata1.00: ATA-8: ST9250315AS, 0002SDM1, max UDMA/133 [ 2.313985] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.316241] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 2.316618] ata1.00: configured for UDMA/133 [ 2.333548] scsi 0:0:0:0: Direct-Access ATA ST9250315AS 0002 PQ: 0 ANSI: 5 [ 2.353068] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 2.353215] sd 0:0:0:0: [sda] Write Protect is off [ 2.353224] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.353300] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.353691] sda: sda1 sda2 < sda5 > [ 2.367187] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.389041] usb 1-3: new high speed USB device using ehci_hcd and address 3 [ 2.522437] usb 1-3: New USB device found, idVendor=058f, idProduct=6335 [ 2.522447] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.522455] usb 1-3: Product: Mass Storage Device [ 2.522461] usb 1-3: Manufacturer: Generic [ 2.522467] usb 1-3: SerialNumber: 058F63356336 [ 2.522678] usb 1-3: configuration #1 chosen from 1 choice [ 2.533216] integrated sync not supported [ 2.548987] Initializing USB Mass Storage driver... [ 2.600923] scsi4 : SCSI emulation for USB Mass Storage devices [ 2.601146] usbcore: registered new interface driver usb-storage [ 2.601154] USB Mass Storage support registered. [ 2.601410] usb-storage: device found at 3 [ 2.601415] usb-storage: waiting for device to settle before scanning [ 2.620670] [drm] LVDS-8: set mode 1024x600 e [ 2.853758] Console: switching to colour frame buffer device 128x37 [ 2.861720] fb0: inteldrmfb frame buffer device [ 2.861723] registered panic notifier [ 2.861752] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 2.876035] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 2.965872] device-mapper: uevent: version 1.0.3 [ 2.966759] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 3.000048] usb 5-1: device descriptor read/64, error -71 [ 3.220023] usb 5-1: device descriptor read/64, error -71 [ 3.436021] usb 5-1: new full speed USB device using uhci_hcd and address 3 [ 3.556018] usb 5-1: device descriptor read/64, error -71 [ 3.780021] usb 5-1: device descriptor read/64, error -71 [ 3.996022] usb 5-1: new full speed USB device using uhci_hcd and address 4 [ 4.404016] usb 5-1: device not accepting address 4, error -71 [ 4.516019] usb 5-1: new full speed USB device using uhci_hcd and address 5 [ 4.924016] usb 5-1: device not accepting address 5, error -71 [ 4.924032] hub 5-0:1.0: unable to enumerate USB device on port 1 [ 7.600196] usb-storage: device scan complete [ 7.600809] scsi 4:0:0:0: Direct-Access Single Flash Reader 1.00 PQ: 0 ANSI: 0 [ 7.997397] sd 4:0:0:0: [sdb] 31388672 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 7.998135] sd 4:0:0:0: [sdb] Write Protect is off [ 7.998143] sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 7.998148] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 8.000633] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 8.000643] sdb: sdb1 [ 8.003305] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 8.003318] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 17.047020] PM: Starting manual resume from disk [ 17.133092] EXT4-fs (dm-1): mounted filesystem with ordered data mode [ 18.601700] udev: starting version 151 [ 19.131388] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 19.158623] ACPI: SSDT 3f7ae180 0023C (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 19.160452] ACPI: SSDT 3f7ae450 00724 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 19.161526] ACPI: AC Adapter [AC0] (off-line) [ 19.163698] Monitor-Mwait will be used to enter C-1 state [ 19.163777] Monitor-Mwait will be used to enter C-2 state [ 19.163840] Monitor-Mwait will be used to enter C-3 state [ 19.163859] Marking TSC unstable due to TSC halts in idle [ 19.164161] processor LNXCPU:00: registered as cooling_device1 [ 19.165257] ACPI: SSDT 3f7ae0b0 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117) [ 19.166139] ACPI: SSDT 3f7ae3c0 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117) [ 19.167038] Switching to clocksource hpet [ 19.233900] atl1c 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 19.233927] atl1c 0000:01:00.0: setting latency timer to 64 [ 19.239327] processor LNXCPU:01: registered as cooling_device2 [ 19.245661] intel_rng: FWH not detected [ 19.312679] eeepc_laptop: Eee PC Hotkey Driver [ 19.313263] eeepc_laptop: Hotkey init flags 0x41 [ 19.313449] eeepc_laptop: TYPE (2000000) not reported by BIOS, enabling anyway [ 19.323002] eeepc_laptop: PANELPOWER (4000000) not reported by BIOS, enabling anyway [ 19.343632] atl1c 0000:01:00.0: version 1.0.0.1-NAPI [ 19.346900] eeepc_laptop: TPD (8000000) not reported by BIOS, enabling anyway [ 19.346915] eeepc_laptop: Get control methods supported: 0xe101713 [ 19.347692] eeepc_laptop: Backlight controlled by ACPI video driver [ 19.347893] input: Asus EeePC extra buttons as /devices/platform/eeepc/input/input6 [ 19.397427] ACPI: Battery Slot [BAT0] (battery present) [ 19.507914] cfg80211: Using static regulatory domain info [ 19.507922] cfg80211: Regulatory domain: US [ 19.507928] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 19.507937] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 19.507945] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 19.507954] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 19.507963] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 19.507971] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 19.507980] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 19.508178] cfg80211: Calling CRDA for country: US [ 19.578702] Linux video capture interface: v2.00 [ 19.624342] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (13d3:5108) [ 19.633962] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/input/input7 [ 19.634164] usbcore: registered new interface driver uvcvideo [ 19.634250] USB Video Class driver (v0.1.0) [ 19.701137] atl1c 0000:01:00.0: PCI INT A disabled [ 19.783701] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 19.783724] ath9k 0000:02:00.0: setting latency timer to 64 [ 19.834078] ath: EEPROM regdomain: 0x60 [ 19.834086] ath: EEPROM indicates we should expect a direct regpair map [ 19.834096] ath: Country alpha2 being used: 00 [ 19.834101] ath: Regpair used: 0x60 [ 19.876591] phy0: Selected rate control algorithm 'ath9k_rate_control' [ 19.878124] Registered led device: ath9k-phy0::radio [ 19.878223] Registered led device: ath9k-phy0::assoc [ 19.878319] Registered led device: ath9k-phy0::tx [ 19.878414] Registered led device: ath9k-phy0::rx [ 19.878452] phy0: Atheros AR9285 MAC/BB Rev:2 AR5133 RF Rev:e0: mem=0xf8ee0000, irq=17 [ 20.009044] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 20.009155] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 20.130446] hda_codec: ALC269: BIOS auto-probing. [ 20.131217] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8 [ 20.255428] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1a0b1, caps: 0xd04731/0xa40000 [ 20.326778] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9 [ 21.016601] loop: module loaded [ 22.627458] EXT4-fs (dm-5): mounted filesystem with ordered data mode [ 22.697274] EXT4-fs (dm-4): mounted filesystem with ordered data mode [ 22.742904] EXT4-fs (dm-3): mounted filesystem with ordered data mode [ 23.008517] Adding 3002360k swap on /dev/mapper/neutrino-swap_1. Priority:-1 extents:1 across:3002360k [ 24.998286] fuse init (API version 7.13) [ 29.078591] Bluetooth: Core ver 2.15 [ 29.078794] NET: Registered protocol family 31 [ 29.078807] Bluetooth: HCI device and connection manager initialized [ 29.078822] Bluetooth: HCI socket layer initialized [ 29.111069] Bluetooth: L2CAP ver 2.14 [ 29.111069] Bluetooth: L2CAP socket layer initialized [ 29.170939] Bluetooth: RFCOMM TTY layer initialized [ 29.170948] Bluetooth: RFCOMM socket layer initialized [ 29.170953] Bluetooth: RFCOMM ver 1.11 [ 29.367677] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 29.367683] Bluetooth: BNEP filters: protocol multicast [ 29.427789] Bridge firewalling registered [ 29.456960] Bluetooth: SCO (Voice Link) ver 0.6 [ 29.456968] Bluetooth: SCO socket layer initialized [ 32.947823] integrated sync not supported [ 33.095389] integrated sync not supported [ 39.964370] usb 5-1: new full speed USB device using uhci_hcd and address 6 [ 40.084099] usb 5-1: device descriptor read/64, error -71 [ 40.308121] usb 5-1: device descriptor read/64, error -71 [ 40.528071] usb 5-1: new full speed USB device using uhci_hcd and address 7 [ 40.648210] usb 5-1: device descriptor read/64, error -71 [ 40.872200] usb 5-1: device descriptor read/64, error -71 [ 41.088197] usb 5-1: new full speed USB device using uhci_hcd and address 8 [ 41.504168] usb 5-1: device not accepting address 8, error -71 [ 41.616182] usb 5-1: new full speed USB device using uhci_hcd and address 9 [ 42.032149] usb 5-1: device not accepting address 9, error -71 [ 42.032196] hub 5-0:1.0: unable to enumerate USB device on port 1 [ 42.842251] CPU0 attaching NULL sched-domain. [ 42.842269] CPU1 attaching NULL sched-domain. [ 42.873263] CPU0 attaching sched-domain: [ 42.873279] domain 0: span 0-1 level SIBLING [ 42.873291] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 42.873317] domain 1: span 0-1 level MC [ 42.873327] groups: 0-1 (cpu_power = 1178) [ 42.873347] CPU1 attaching sched-domain: [ 42.873357] domain 0: span 0-1 level SIBLING [ 42.873367] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 42.873390] domain 1: span 0-1 level MC [ 42.873400] groups: 0-1 (cpu_power = 1178) [ 43.698339] integrated sync not supported [ 43.870307] integrated sync not supported [ 44.031736] integrated sync not supported -- GMX DSL: Internet, Telefon und Entertainment für nur 19,99 EUR/mtl.! http://portal.gmx.net/de/go/dsl02
--- End Message ---
--- Begin Message ---
- To: 573610-done@bugs.debian.org
- Subject: Re: Bug#573610: Acknowledgement (linux-image-2.6-686: Bluetooth on EeePC 1005ha not usable)
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Sat, 20 Mar 2010 18:35:41 +0000
- Message-id: <1269110141.18314.94.camel@localhost>
- In-reply-to: <20100320170812.108530@gmx.net>
- References: <20100312212825.32040@gmx.net> <handler.573610.B.126842931529202.ack@bugs.debian.org> <20100320170812.108530@gmx.net>
Version: 2.6.32-9 On Sat, 2010-03-20 at 18:08 +0100, wiekaltheut@gmx.de wrote: > Bluetooth seems to work with the current 2.6.32 from testing. Still no > kill switch, but this seems to be an issue of eeepc-laptop not getting > loaded properly. Therefore I'm closing this bug. Ben. -- Ben Hutchings Power corrupts. Absolute power is kind of neat. - John Lehman, Secretary of the US Navy 1981-1987Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---