Bug#573334: linux-image-2.6.32-3-686: intermittent kernel soft lockups
Package: linux-2.6
Version: 2.6.32-9
Severity: critical
Justification: breaks the whole system
Using this version of linux image (and previous versions of 2.6.32 from sid as well) on lenny-i386 results in intermittent soft-lockups (see netconsole capture below). It is not an hardware-issue as I can reproduce it on multiple (identical) machines with identical hard-disk images.
It happens regularly in the range of some minutes to some hours after boot. Sometimes it seems to coincidence when an usb storage device gets connected, but it also happens purely randomly, from the user's point of view.
This bug seems to be only occuring on single core machines, I never saw it happen on an intel core-duo (on intel 945 chipset) version of the (otherwise) identical hardware running the identical hard-disk image.
The hardware in use is a Congatec XTX X855 Computer-On-Module with 1GHz Celeron M373, intel 855 chipset, 256MB RAM (thats what the cgosdrv kernel module is for) and a 4GB CF-Card attached to ATA as hard drive.
netconsole trace:
[ 1190.780002] BUG: soft lockup - CPU#0 stuck for 61s! [datalog:845]
[ 1190.780002] Modules linked in: usb_storage netconsole configfs cgosdrv(P) loop reiserfs ide_gd_mod piix ide_pci_generic ide_core ata_generic sata_sil e100 libata scsi_mod ehci_hcd uhci_hcd thermal fan thermal_sys arc4 ecb option usbserial mcs7830 asix usbnet mii rt2870sta(C) rt2800usb crc_ccitt rt73usb crc_itu_t rt2x00usb rt2x00lib rtl8187 mac80211 led_class cfg80211 rfkill eeprom_93cx6 cdc_acm usbcore nls_base [last unloaded: scsi_wait_scan]
[ 1190.780002]
[ 1190.780002] Pid: 845, comm: datalog Tainted: P C (2.6.32-trunk-686 #1)
[ 1190.780002] EIP: 0060:[<cd8126ad>] EFLAGS: 00000286 CPU: 0
[ 1190.780002] EIP is at 0xcd8126ad
[ 1190.780002] EAX: 0000001c EBX: cd8110f6 ECX: cd812a30 EDX: cd810000
[ 1190.780002] ESI: cd810000 EDI: cd835bf8 EBP: cd812bda ESP: cd835ab6
[ 1190.780002] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[ 1190.780002] CR0: 8005003b CR2: b77b8000 CR3: 0d8cd000 CR4: 000006d0
[ 1190.780002] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[ 1190.780002] DR6: ffff0ff0 DR7: 00000400
[ 1190.780002] Call Trace:
Thats where the netconsole output stopped.
-- Package-specific info:
** Version:
Linux version 2.6.32-3-686 (Debian 2.6.32-9) (maks@debian.org) (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Thu Feb 25 06:14:20 UTC 2010
** Command line:
root=UUID=0c15b240-456d-4d05-ad9b-990670ffd33f init=/sbin/initng ro
** Tainted: PC (1025)
* Proprietary module has been loaded.
* Module from drivers/staging has been loaded.
** Kernel log:
[15162.266954] wlan0: authenticated
[15162.266980] wlan0: associate with AP 00:1a:70:33:a0:18 (try 1)
[15162.269211] wlan0: RX AssocResp from 00:1a:70:33:a0:18 (capab=0x411 status=0 aid=3)
[15162.269217] wlan0: associated
[15162.283768] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[15172.868012] wlan0: no IPv6 routers present
[15178.779721] wlan0: deauthenticating from 00:1a:70:33:a0:18 by local choice (reason=3)
[15375.993273] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[15377.153132] wlan0: deauthenticating from 00:1a:70:33:a0:18 by local choice (reason=3)
[15377.154720] wlan0: direct probe to AP 00:1a:70:33:a0:18 (try 1)
[15377.156997] wlan0: direct probe responded
[15377.157003] wlan0: authenticate with AP 00:1a:70:33:a0:18 (try 1)
[15377.158731] wlan0: authenticated
[15377.158755] wlan0: associate with AP 00:1a:70:33:a0:18 (try 1)
[15377.161987] wlan0: RX AssocResp from 00:1a:70:33:a0:18 (capab=0x411 status=0 aid=3)
[15377.161993] wlan0: associated
[15377.176799] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[15387.744013] wlan0: no IPv6 routers present
[15394.215222] wlan0: deauthenticating from 00:1a:70:33:a0:18 by local choice (reason=3)
[15634.248441] hub 4-5:1.0: port 4 disabled by hub (EMI?), re-enabling...
[15634.248562] usb 4-5.4: USB disconnect, address 3
[15634.708176] usb 4-5.4: new high speed USB device using ehci_hcd and address 4
[15634.961779] usb 4-5.4: New USB device found, idVendor=18e8, idProduct=6238
[15634.961785] usb 4-5.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[15634.961791] usb 4-5.4: Product: 802.11 bg WLAN
[15634.961795] usb 4-5.4: Manufacturer: Ralink
[15634.961976] usb 4-5.4: configuration #1 chosen from 1 choice
[15635.231706] phy1: Selected rate control algorithm 'minstrel'
[15635.232947] Registered led device: rt73usb-phy1::radio
[15635.232981] Registered led device: rt73usb-phy1::assoc
[15635.233012] Registered led device: rt73usb-phy1::quality
[15635.600130] usb 4-5.3: new full speed USB device using ehci_hcd and address 5
[15635.693363] usb 4-5.3: New USB device found, idVendor=1546, idProduct=01a5
[15635.693369] usb 4-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[15635.693375] usb 4-5.3: Product: u-blox LEA-5H GPS module
[15635.693380] usb 4-5.3: Manufacturer: u-blox
[15635.693385] usb 4-5.3: SerialNumber: 00326
[15635.693572] usb 4-5.3: configuration #1 chosen from 1 choice
[15635.695042] cdc_acm 4-5.3:1.0: ttyACM0: USB ACM device
[15673.246678] rt73usb 4-5.4:1.0: firmware: requesting rt73.bin
[15673.380143] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[15674.580037] wlan0: deauthenticating from 00:1a:70:33:a0:18 by local choice (reason=3)
[15674.582233] wlan0: direct probe to AP 00:1a:70:33:a0:18 (try 1)
[15674.584265] wlan0: direct probe responded
[15674.584274] wlan0: authenticate with AP 00:1a:70:33:a0:18 (try 1)
[15674.585996] wlan0: authenticated
[15674.586021] wlan0: associate with AP 00:1a:70:33:a0:18 (try 1)
[15674.588251] wlan0: RX AssocResp from 00:1a:70:33:a0:18 (capab=0x411 status=0 aid=3)
[15674.588257] wlan0: associated
[15674.607165] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[15685.516013] wlan0: no IPv6 routers present
[15690.736529] wlan0: deauthenticating from 00:1a:70:33:a0:18 by local choice (reason=3)
[15925.225542] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[15926.470769] wlan0: deauthenticating from 00:1a:70:33:a0:18 by local choice (reason=3)
[15926.472850] wlan0: direct probe to AP 00:1a:70:33:a0:18 (try 1)
[15926.474877] wlan0: direct probe responded
[15926.474884] wlan0: authenticate with AP 00:1a:70:33:a0:18 (try 1)
[15926.476615] wlan0: authenticated
[15926.476640] wlan0: associate with AP 00:1a:70:33:a0:18 (try 1)
[15926.478869] wlan0: RX AssocResp from 00:1a:70:33:a0:18 (capab=0x411 status=0 aid=3)
[15926.478875] wlan0: associated
[15926.497296] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[15937.376014] wlan0: no IPv6 routers present
[15970.562578] wlan0: deauthenticating from 00:1a:70:33:a0:18 by local choice (reason=3)
[17696.150570] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[17697.350550] wlan0: deauthenticating from 00:1a:70:33:a0:18 by local choice (reason=3)
[17697.352763] wlan0: direct probe to AP 00:1a:70:33:a0:18 (try 1)
[17697.354787] wlan0: direct probe responded
[17697.354793] wlan0: authenticate with AP 00:1a:70:33:a0:18 (try 1)
[17697.357020] wlan0: authenticated
[17697.357045] wlan0: associate with AP 00:1a:70:33:a0:18 (try 1)
[17697.359401] wlan0: RX AssocResp from 00:1a:70:33:a0:18 (capab=0x411 status=0 aid=4)
[17697.359407] wlan0: associated
[17697.377840] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[17707.836013] wlan0: no IPv6 routers present
[17711.617532] wlan0: deauthenticating from 00:1a:70:33:a0:18 by local choice (reason=3)
[17756.255832] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[17757.483192] wlan0: deauthenticating from 00:1a:70:33:a0:18 by local choice (reason=3)
[17757.485279] wlan0: direct probe to AP 00:1a:70:33:a0:18 (try 1)
[17757.487308] wlan0: direct probe responded
[17757.487314] wlan0: authenticate with AP 00:1a:70:33:a0:18 (try 1)
[17757.489040] wlan0: authenticated
[17757.489066] wlan0: associate with AP 00:1a:70:33:a0:18 (try 1)
[17757.491295] wlan0: RX AssocResp from 00:1a:70:33:a0:18 (capab=0x411 status=0 aid=4)
[17757.491301] wlan0: associated
[17757.521717] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[17767.704017] wlan0: no IPv6 routers present
[17773.843193] wlan0: deauthenticating from 00:1a:70:33:a0:18 by local choice (reason=3)
[18058.442227] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[18059.662965] wlan0: deauthenticating from 00:1a:70:33:a0:18 by local choice (reason=3)
[18059.665050] wlan0: direct probe to AP 00:1a:70:33:a0:18 (try 1)
[18059.667077] wlan0: direct probe responded
[18059.667084] wlan0: authenticate with AP 00:1a:70:33:a0:18 (try 1)
[18059.668810] wlan0: authenticated
[18059.668833] wlan0: associate with AP 00:1a:70:33:a0:18 (try 1)
[18059.671188] wlan0: RX AssocResp from 00:1a:70:33:a0:18 (capab=0x411 status=0 aid=4)
[18059.671194] wlan0: associated
[18059.688747] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[18070.568010] wlan0: no IPv6 routers present
[18073.959439] wlan0: deauthenticating from 00:1a:70:33:a0:18 by local choice (reason=3)
** Model information
not available
** Loaded modules:
Module Size Used by
cgosdrv 17266 0
loop 9753 0
reiserfs 176200 2
ide_gd_mod 17171 3
piix 3564 2
ide_pci_generic 1924 0
ide_core 64146 3 ide_gd_mod,piix,ide_pci_generic
ata_generic 2015 0
sata_sil 5616 0
e100 22313 0
libata 114408 2 ata_generic,sata_sil
scsi_mod 101297 1 libata
ehci_hcd 27574 0
uhci_hcd 16045 0
thermal 9206 0
fan 2586 0
thermal_sys 9378 2 thermal,fan
arc4 974 2
ecb 1405 2
option 13211 0
usbserial 21843 1 option
mcs7830 4077 0
asix 9672 0
usbnet 9523 2 mcs7830,asix
mii 2714 4 e100,mcs7830,asix,usbnet
rt2870sta 367449 0
rt2800usb 24923 0
crc_ccitt 1039 2 rt2870sta,rt2800usb
rt73usb 17589 0
crc_itu_t 1035 1 rt73usb
rt2x00usb 5709 2 rt2800usb,rt73usb
rt2x00lib 19025 3 rt2800usb,rt73usb,rt2x00usb
rtl8187 25206 0
mac80211 122750 3 rt2x00usb,rt2x00lib,rtl8187
led_class 1757 2 rt2x00lib,rtl8187
cfg80211 87581 3 rt2x00lib,rtl8187,mac80211
rfkill 10260 1 cfg80211
eeprom_93cx6 963 1 rtl8187
cdc_acm 11463 0
usbcore 98126 14 ehci_hcd,uhci_hcd,option,usbserial,mcs7830,asix,usbnet,rt2870sta,rt2800usb,rt73usb,rt2x00usb,rtl8187,cdc_acm
nls_base 4541 1 usbcore
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto eth0
iface eth0 inet static
address 192.168.1.88
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
up route add -net 255.255.255.255 netmask 255.255.255.255 dev eth0
# gateway 172.16.0.1
** Network status:
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 137 2 0 0 0 0 0 0 137 2 0 0 0 0 0 0
eth0:1190181109 9844030 0 0 0 0 0 0 67685267 1481117 0 0 0 0 0 0
wlan0: 940986 6363 0 0 0 0 0 0 1502227 3132 0 0 0 0 0 0
*** Protocol statistics:
Ip:
9859523 total packets received
20 with invalid addresses
0 forwarded
0 incoming packets discarded
9859503 incoming packets delivered
1486697 requests sent out
30 dropped because of missing route
Icmp:
7 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 2
echo replies: 5
13 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 5
echo request: 8
IcmpMsg:
InType0: 5
InType3: 2
OutType3: 5
OutType8: 8
Tcp:
24 active connections openings
30 passive connection openings
0 failed connection attempts
0 connection resets received
2 connections established
47839 segments received
19353 segments send out
8 segments retransmited
0 bad segments received.
4 resets sent
Udp:
9809784 packets received
3 packets to unknown port received.
0 packet receive errors
1467323 packets sent
UdpLite:
TcpExt:
65 packets pruned from receive queue because of socket buffer overrun
26 TCP sockets finished time wait in fast timer
719 delayed acks sent
2 delayed acks further delayed because of locked socket
Quick ack mode was activated 3 times
3691 packets directly queued to recvmsg prequeue.
252 bytes directly in process context from backlog
1162443 bytes directly received in process context from prequeue
34220 packet headers predicted
2686 packets header predicted and directly queued to user
390 acknowledgments not containing data payload received
6394 predicted acknowledgments
8 other TCP timeouts
2503 packets collapsed in receive queue due to low socket buffer
3 DSACKs sent for old packets
IpExt:
InBcastPkts: 4892
OutBcastPkts: 3102
InOctets: 1055326204
OutOctets: 48859473
InBcastOctets: 154784
OutBcastOctets: 99264
*** Device features:
eth0: 0x0
lo: 0x13865
wlan0: 0x2000
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller [8086:3580] (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at <unassigned> (32-bit, prefetchable)
Capabilities: <access denied>
Kernel modules: intel-agp
00:00.1 System peripheral [0880]: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller [8086:3584] (rev 02)
Subsystem: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller [8086:3584]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.3 System peripheral [0880]: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller [8086:3585] (rev 02)
Subsystem: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller [8086:3585]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:02.0 VGA compatible controller [0300]: Intel Corporation 82852/855GM Integrated Graphics Device [8086:3582] (rev 02) (prog-if 00 [VGA controller])
Subsystem: Intel Corporation 82852/855GM Integrated Graphics Device [8086:3582]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at ffa80000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at ec00 [size=8]
Capabilities: <access denied>
Kernel modules: i915
00:02.1 Display controller [0380]: Intel Corporation 82852/855GM Integrated Graphics Device [8086:3582] (rev 02)
Subsystem: Intel Corporation 82852/855GM Integrated Graphics Device [8086:3582]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at ff980000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:24c0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at e000 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:24c0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at e080 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:24c0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at e400 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device [8086:24c0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at ffa7b400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 82) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: ff600000-ff7fffff
Prefetchable memory behind bridge: 10000000-100fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp
00:1f.0 ISA bridge [0601]: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge [8086:24c0] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel modules: intel-rng, iTCO_wdt
00:1f.1 IDE interface [0101]: Intel Corporation 82801DB (ICH4) IDE Controller [8086:24cb] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corporation Device [8086:24c0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at fc00 [size=16]
Region 5: Memory at 10100000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: PIIX_IDE
Kernel modules: piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller [8086:24c3] (rev 02)
Subsystem: Intel Corporation Device [8086:24c0]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 5
Region 4: I/O ports at 0400 [size=32]
Kernel modules: i2c-i801
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 02)
Subsystem: Device [414c:4760]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 5
Region 0: I/O ports at e800 [size=256]
Region 1: I/O ports at e480 [size=64]
Region 2: Memory at ffa7bc00 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at ffa7b800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel modules: snd-intel8x0
01:02.0 Mass storage controller [0180]: Silicon Image, Inc. SiI 3512 [SATALink/SATARaid] Serial ATA Controller [1095:3512] (rev 01)
Subsystem: Silicon Image, Inc. SiI 3512 SATALink Controller [1095:3512]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at dc00 [size=8]
Region 1: I/O ports at d880 [size=4]
Region 2: I/O ports at d800 [size=8]
Region 3: I/O ports at d480 [size=4]
Region 4: I/O ports at d400 [size=16]
Region 5: Memory at ff7ffc00 (32-bit, non-prefetchable) [size=512]
Expansion ROM at 10000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: sata_sil
Kernel modules: sata_sil
01:08.0 Ethernet controller [0200]: Intel Corporation 82801DB PRO/100 VE (CNR) Ethernet Controller [8086:103a] (rev 82)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at ff7fe000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at d080 [size=64]
Capabilities: <access denied>
Kernel driver in use: e100
Kernel modules: e100
** Sound cards:
-- System Information:
Debian Release: 5.0.4
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-3-686 (SMP w/1 CPU core)
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.32-3-686 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-3-686 recommends:
ii firmware-linux-free 2.6.32-9 Binary firmware for various driver
ii libc6-i686 2.7-18lenny1 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.32-3-686 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-3-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
ii firmware-linux 0.22 Binary firmware for various driver
ii firmware-linux-nonfree 0.22 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
ii firmware-ralink 0.22 Binary firmware for Ralink RT2561,
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-3-686/postinst/bootloader-error-2.6.32-3-686:
linux-image-2.6.32-3-686/postinst/depmod-error-initrd-2.6.32-3-686: false
linux-image-2.6.32-3-686/postinst/bootloader-test-error-2.6.32-3-686:
linux-image-2.6.32-3-686/postinst/missing-firmware-2.6.32-3-686:
linux-image-2.6.32-3-686/prerm/removing-running-kernel-2.6.32-3-686: true
linux-image-2.6.32-3-686/prerm/would-invalidate-boot-loader-2.6.32-3-686: true
--
GRATIS für alle GMX-Mitglieder: Die maxdome Movie-FLAT!
Jetzt freischalten unter http://portal.gmx.net/de/go/maxdome01
Reply to: