[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#571215: marked as done (Backlight turned off during bootup)



Your message dated Thu, 25 Feb 2010 22:38:13 +0100
with message-id <4B86EDC5.10300@znc.in>
and subject line Re: Bug#571215: Backlight turned off during bootup
has caused the Debian Bug report #571215,
regarding Backlight turned off during bootup
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
571215: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=571215
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256

Package: udev
Version: 151-2
thanks

Yesterday, I had the following upgrades:
===============================================================================
[AKTUALISIERUNG] gstreamer0.10-alsa 0.10.25-7 -> 0.10.26-1
[AKTUALISIERUNG] gstreamer0.10-plugins-base 0.10.25-7 -> 0.10.26-1
[AKTUALISIERUNG] gstreamer0.10-plugins-good 0.10.17-1 -> 0.10.18-1
[AKTUALISIERUNG] gstreamer0.10-x 0.10.25-7 -> 0.10.26-1
[AKTUALISIERUNG] libapr1 1.3.8-1 -> 1.4.2-3
[AKTUALISIERUNG] libcompress-raw-zlib-perl 2.023-1 -> 2.024-1
[AKTUALISIERUNG] libcompress-zlib-perl 2.022-1 -> 2.024-1
[AKTUALISIERUNG] libgstreamer-plugins-base0.10-0 0.10.25-7 -> 0.10.26-1
[AKTUALISIERUNG] libgstreamer0.10-0 0.10.25-4+b1 -> 0.10.26-1
[AKTUALISIERUNG] libgudev-1.0-0 150-2 -> 151-2
[AKTUALISIERUNG] libio-compress-perl 2.022-1 -> 2.024-1
[AKTUALISIERUNG] libmailtools-perl 2.05-1 -> 2.06-1
[AKTUALISIERUNG] libudev0 150-2 -> 151-2
[AKTUALISIERUNG] python-gst0.10 0.10.17-1+b1 -> 0.10.18-1
[AKTUALISIERUNG] traceroute 2.0.13-2 -> 1:2.0.13-3
[AKTUALISIERUNG] udev 150-2 -> 151-2
===============================================================================

(After this, the initrd was regenerated)

This morning when I booted my laptop, right after grub was done, the backlight
turned off. I collected the attached info by entering my HDD passphrase blindly
and starting up X (which partly worked but was damn slow).

Kernel is 2.6.32-trunk-amd64.

Thanks

- --
- - Buck, when exactly did you lose your mind?
- - Three months ago. I woke up one morning married to a pineapple.
  An ugly pineapple... But I loved her!
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)

iQEcBAEBCAAGBQJLhRR8AAoJECLkKOvLj8sGZSoH/0haRoPY+zGPJ+f6uUQH3S0i
UNHjcMUt1iPhaR+DSqpteK2tAn3VSFMdr8IEYVhOZR7f2D7Yn946QYulJV1fiyC+
a0UUk3CpWgKvlAYPDN9tyy4pLzeeSqrrAJG1SiJFR2krfZ48jQ7BIGmBQzDD7J0N
OfcyssXJwl1GfwNht3Vb4YpyWWCkk1Td28Wl4Mx2U1Q9qp/RyZKw5ofF5Dn5gp9p
Ap21cC/pniglV3DDwf/m5vlwHl4WNg7tevD/SgBZY+X9BkHoCbW+lKxZVjcAZcAH
DRMqfhgWiSx8PfkC5PtKYJBj0PgazeFZbpm94HiUlOkINoQT2x5rmisoGKTq+8Y=
=RaOQ
-----END PGP SIGNATURE-----
Feb 24 12:34:40 psytux kernel: imklog 4.4.2, log source = /proc/kmsg started.
Feb 24 12:34:40 psytux rsyslogd: [origin software="rsyslogd" swVersion="4.4.2" x-pid="1996" x-info="http://www.rsyslog.com";] (re)start
Feb 24 12:34:40 psytux kernel: [    0.000000] Initializing cgroup subsys cpuset
Feb 24 12:34:40 psytux kernel: [    0.000000] Initializing cgroup subsys cpu
Feb 24 12:34:40 psytux kernel: [    0.000000] Linux version 2.6.32-trunk-amd64 (Debian 2.6.32-5) (ben@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sun Jan 10 22:40:40 UTC 2010
Feb 24 12:34:40 psytux kernel: [    0.000000] Command line: BOOT_IMAGE=//vmlinuz-2.6.32-trunk-amd64 root=/dev/mapper/psytux-root ro video=i915 quiet
Feb 24 12:34:40 psytux kernel: [    0.000000] KERNEL supported cpus:
Feb 24 12:34:40 psytux kernel: [    0.000000]   Intel GenuineIntel
Feb 24 12:34:40 psytux kernel: [    0.000000]   AMD AuthenticAMD
Feb 24 12:34:40 psytux kernel: [    0.000000]   Centaur CentaurHauls
Feb 24 12:34:40 psytux kernel: [    0.000000] BIOS-provided physical RAM map:
Feb 24 12:34:40 psytux kernel: [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Feb 24 12:34:40 psytux kernel: [    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Feb 24 12:34:40 psytux kernel: [    0.000000]  BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved)
Feb 24 12:34:40 psytux kernel: [    0.000000]  BIOS-e820: 0000000000100000 - 0000000077130000 (usable)
Feb 24 12:34:40 psytux kernel: [    0.000000]  BIOS-e820: 0000000077130000 - 0000000077140000 (ACPI NVS)
Feb 24 12:34:40 psytux kernel: [    0.000000]  BIOS-e820: 0000000077140000 - 000000007b4e0000 (usable)
Feb 24 12:34:40 psytux kernel: [    0.000000]  BIOS-e820: 000000007b4e0000 - 000000007b6e0000 (ACPI NVS)
Feb 24 12:34:40 psytux kernel: [    0.000000]  BIOS-e820: 000000007b6e0000 - 000000007b993000 (usable)
Feb 24 12:34:40 psytux kernel: [    0.000000]  BIOS-e820: 000000007b993000 - 000000007b99b000 (reserved)
Feb 24 12:34:40 psytux kernel: [    0.000000]  BIOS-e820: 000000007b99b000 - 000000007b9bf000 (usable)
Feb 24 12:34:40 psytux kernel: [    0.000000]  BIOS-e820: 000000007b9bf000 - 000000007b9cf000 (reserved)
Feb 24 12:34:40 psytux kernel: [    0.000000]  BIOS-e820: 000000007b9cf000 - 000000007bacf000 (ACPI NVS)
Feb 24 12:34:40 psytux kernel: [    0.000000]  BIOS-e820: 000000007bacf000 - 000000007baff000 (ACPI data)
Feb 24 12:34:40 psytux kernel: [    0.000000]  BIOS-e820: 000000007baff000 - 000000007bb00000 (usable)
Feb 24 12:34:40 psytux kernel: [    0.000000]  BIOS-e820: 000000007bb00000 - 0000000080000000 (reserved)
Feb 24 12:34:40 psytux kernel: [    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Feb 24 12:34:40 psytux kernel: [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Feb 24 12:34:40 psytux kernel: [    0.000000]  BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
Feb 24 12:34:40 psytux kernel: [    0.000000]  BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
Feb 24 12:34:40 psytux kernel: [    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
Feb 24 12:34:40 psytux kernel: [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Feb 24 12:34:40 psytux kernel: [    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
Feb 24 12:34:40 psytux kernel: [    0.000000] DMI 2.4 present.
Feb 24 12:34:40 psytux kernel: [    0.000000] last_pfn = 0x7bb00 max_arch_pfn = 0x400000000
Feb 24 12:34:40 psytux kernel: [    0.000000] MTRR default type: uncachable
Feb 24 12:34:40 psytux kernel: [    0.000000] MTRR fixed ranges enabled:
Feb 24 12:34:40 psytux kernel: [    0.000000]   00000-9FFFF write-back
Feb 24 12:34:40 psytux kernel: [    0.000000]   A0000-BFFFF uncachable
Feb 24 12:34:40 psytux kernel: [    0.000000]   C0000-FFFFF write-protect
Feb 24 12:34:40 psytux kernel: [    0.000000] MTRR variable ranges enabled:
Feb 24 12:34:40 psytux kernel: [    0.000000]   0 base 0FFE00000 mask FFFE00000 write-protect
Feb 24 12:34:40 psytux kernel: [    0.000000]   1 base 07BB00000 mask FFFF00000 uncachable
Feb 24 12:34:40 psytux kernel: [    0.000000]   2 base 000000000 mask F80000000 write-back
Feb 24 12:34:40 psytux kernel: [    0.000000]   3 base 077130000 mask FFFFF0000 uncachable
Feb 24 12:34:40 psytux kernel: [    0.000000]   4 disabled
Feb 24 12:34:40 psytux kernel: [    0.000000]   5 disabled
Feb 24 12:34:40 psytux kernel: [    0.000000]   6 disabled
Feb 24 12:34:40 psytux kernel: [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Feb 24 12:34:40 psytux kernel: [    0.000000] initial memory mapped : 0 - 20000000
Feb 24 12:34:40 psytux kernel: [    0.000000] init_memory_mapping: 0000000000000000-000000007bb00000
Feb 24 12:34:40 psytux kernel: [    0.000000]  0000000000 - 007ba00000 page 2M
Feb 24 12:34:40 psytux kernel: [    0.000000]  007ba00000 - 007bb00000 page 4k
Feb 24 12:34:40 psytux kernel: [    0.000000] kernel direct mapping tables up to 7bb00000 @ 8000-c000
Feb 24 12:34:40 psytux kernel: [    0.000000] RAMDISK: 3764e000 - 37feff07
Feb 24 12:34:40 psytux kernel: [    0.000000] ACPI: RSDP 00000000000f68b0 00024 (v02 HPQOEM)
Feb 24 12:34:40 psytux kernel: [    0.000000] ACPI: XSDT 000000007bafe120 0008C (v01 HPQOEM SLIC-MPC 0000000F      01000013)
Feb 24 12:34:40 psytux kernel: [    0.000000] ACPI: FACP 000000007bafc000 000F4 (v03 HPQOEM 30DD     0000000F HP   00000001)
Feb 24 12:34:40 psytux kernel: [    0.000000] ACPI: DSDT 000000007badf000 1780D (v01 HPQOEM 30DD     00000001 INTL 20060912)
Feb 24 12:34:40 psytux kernel: [    0.000000] ACPI: FACS 000000007ba9d000 00040
Feb 24 12:34:40 psytux kernel: [    0.000000] ACPI: HPET 000000007bafb000 00038 (v01 HPQOEM 30DD     00000001 HP   00000001)
Feb 24 12:34:40 psytux kernel: [    0.000000] ACPI: APIC 000000007bafa000 00084 (v01 HPQOEM 30DD     00000001 HP   00000001)
Feb 24 12:34:40 psytux kernel: [    0.000000] ACPI: MCFG 000000007baf9000 0003C (v01 HPQOEM 30DD     00000001 HP   00000001)
Feb 24 12:34:40 psytux kernel: [    0.000000] ACPI: ASF! 000000007baf8000 000A0 (v32 HPQOEM 30DD     00000001 HP   00000001)
Feb 24 12:34:40 psytux kernel: [    0.000000] ACPI: TCPA 000000007baf7000 00032 (v02 HPQOEM 30DD     00000000 HP   00000001)
Feb 24 12:34:40 psytux kernel: [    0.000000] ACPI: SSDT 000000007badc000 002DD (v01 HPQOEM SataAhci 00001000 INTL 20060912)
Feb 24 12:34:40 psytux kernel: [    0.000000] ACPI: SLIC 000000007bada000 00176 (v01 HPQOEM SLIC-MPC 00000001 HP   00000001)
Feb 24 12:34:40 psytux kernel: [    0.000000] ACPI: SSDT 000000007bad9000 00059 (v01 HPQOEM   HPQNLP 00000001 INTL 20060912)
Feb 24 12:34:40 psytux kernel: [    0.000000] ACPI: DMAR 000000007bad8000 000F8 (v01               ? 00000001      00000000)
Feb 24 12:34:40 psytux kernel: [    0.000000] ACPI: SSDT 000000007bad7000 0066C (v01  PmRef    CpuPm 00003000 INTL 20060912)
Feb 24 12:34:40 psytux kernel: [    0.000000] ACPI: SSDT 000000007bad6000 00288 (v01  PmRef  Cpu0Tst 00003000 INTL 20060912)
Feb 24 12:34:40 psytux kernel: [    0.000000] ACPI: SSDT 000000007bad5000 00225 (v01  PmRef    ApTst 00003000 INTL 20060912)
Feb 24 12:34:40 psytux kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Feb 24 12:34:40 psytux kernel: [    0.000000] No NUMA configuration found
Feb 24 12:34:40 psytux kernel: [    0.000000] Faking a node at 0000000000000000-000000007bb00000
Feb 24 12:34:40 psytux kernel: [    0.000000] Bootmem setup node 0 0000000000000000-000000007bb00000
Feb 24 12:34:40 psytux kernel: [    0.000000]   NODE_DATA [000000000000a000 - 0000000000011fff]
Feb 24 12:34:40 psytux kernel: [    0.000000]   bootmap [0000000000012000 -  000000000002175f] pages 10
Feb 24 12:34:40 psytux kernel: [    0.000000] (7 early reservations) ==> bootmem [0000000000 - 007bb00000]
Feb 24 12:34:40 psytux kernel: [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
Feb 24 12:34:40 psytux kernel: [    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
Feb 24 12:34:40 psytux kernel: [    0.000000]   #2 [0001000000 - 000165d9d4]    TEXT DATA BSS ==> [0001000000 - 000165d9d4]
Feb 24 12:34:40 psytux kernel: [    0.000000]   #3 [003764e000 - 0037feff07]          RAMDISK ==> [003764e000 - 0037feff07]
Feb 24 12:34:40 psytux kernel: [    0.000000]   #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
Feb 24 12:34:40 psytux kernel: [    0.000000]   #5 [000165e000 - 000165e19c]              BRK ==> [000165e000 - 000165e19c]
Feb 24 12:34:40 psytux kernel: [    0.000000]   #6 [0000008000 - 000000a000]          PGTABLE ==> [0000008000 - 000000a000]
Feb 24 12:34:40 psytux kernel: [    0.000000]  [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001c00000-ffff8800037fffff] on node 0
Feb 24 12:34:40 psytux kernel: [    0.000000] Zone PFN ranges:
Feb 24 12:34:40 psytux kernel: [    0.000000]   DMA      0x00000000 -> 0x00001000
Feb 24 12:34:40 psytux kernel: [    0.000000]   DMA32    0x00001000 -> 0x00100000
Feb 24 12:34:40 psytux kernel: [    0.000000]   Normal   0x00100000 -> 0x00100000
Feb 24 12:34:40 psytux kernel: [    0.000000] Movable zone start PFN for each node
Feb 24 12:34:40 psytux kernel: [    0.000000] early_node_map[6] active PFN ranges
Feb 24 12:34:40 psytux kernel: [    0.000000]     0: 0x00000000 -> 0x0000009f
Feb 24 12:34:40 psytux kernel: [    0.000000]     0: 0x00000100 -> 0x00077130
Feb 24 12:34:40 psytux kernel: [    0.000000]     0: 0x00077140 -> 0x0007b4e0
Feb 24 12:34:40 psytux kernel: [    0.000000]     0: 0x0007b6e0 -> 0x0007b993
Feb 24 12:34:40 psytux kernel: [    0.000000]     0: 0x0007b99b -> 0x0007b9bf
Feb 24 12:34:40 psytux kernel: [    0.000000]     0: 0x0007baff -> 0x0007bb00
Feb 24 12:34:40 psytux kernel: [    0.000000] On node 0 totalpages: 505671
Feb 24 12:34:40 psytux kernel: [    0.000000]   DMA zone: 56 pages used for memmap
Feb 24 12:34:40 psytux kernel: [    0.000000]   DMA zone: 101 pages reserved
Feb 24 12:34:40 psytux kernel: [    0.000000]   DMA zone: 3842 pages, LIFO batch:0
Feb 24 12:34:40 psytux kernel: [    0.000000]   DMA32 zone: 6871 pages used for memmap
Feb 24 12:34:40 psytux kernel: [    0.000000]   DMA32 zone: 494801 pages, LIFO batch:31
Feb 24 12:34:40 psytux kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x408
Feb 24 12:34:40 psytux kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Feb 24 12:34:40 psytux kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Feb 24 12:34:40 psytux kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Feb 24 12:34:40 psytux kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
Feb 24 12:34:40 psytux kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
Feb 24 12:34:40 psytux kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Feb 24 12:34:40 psytux kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Feb 24 12:34:40 psytux kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
Feb 24 12:34:40 psytux kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
Feb 24 12:34:40 psytux kernel: [    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
Feb 24 12:34:40 psytux kernel: [    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
Feb 24 12:34:40 psytux kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Feb 24 12:34:40 psytux kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Feb 24 12:34:40 psytux kernel: [    0.000000] ACPI: IRQ0 used by override.
Feb 24 12:34:40 psytux kernel: [    0.000000] ACPI: IRQ2 used by override.
Feb 24 12:34:40 psytux kernel: [    0.000000] ACPI: IRQ9 used by override.
Feb 24 12:34:40 psytux kernel: [    0.000000] Using ACPI (MADT) for SMP configuration information
Feb 24 12:34:40 psytux kernel: [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
Feb 24 12:34:40 psytux kernel: [    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
Feb 24 12:34:40 psytux kernel: [    0.000000] nr_irqs_gsi: 24
Feb 24 12:34:40 psytux kernel: [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Feb 24 12:34:40 psytux kernel: [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ef000
Feb 24 12:34:40 psytux kernel: [    0.000000] PM: Registered nosave memory: 00000000000ef000 - 0000000000100000
Feb 24 12:34:40 psytux kernel: [    0.000000] PM: Registered nosave memory: 0000000077130000 - 0000000077140000
Feb 24 12:34:40 psytux kernel: [    0.000000] PM: Registered nosave memory: 000000007b4e0000 - 000000007b6e0000
Feb 24 12:34:40 psytux kernel: [    0.000000] PM: Registered nosave memory: 000000007b993000 - 000000007b99b000
Feb 24 12:34:40 psytux kernel: [    0.000000] PM: Registered nosave memory: 000000007b9bf000 - 000000007b9cf000
Feb 24 12:34:40 psytux kernel: [    0.000000] PM: Registered nosave memory: 000000007b9cf000 - 000000007bacf000
Feb 24 12:34:40 psytux kernel: [    0.000000] PM: Registered nosave memory: 000000007bacf000 - 000000007baff000
Feb 24 12:34:40 psytux kernel: [    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
Feb 24 12:34:40 psytux kernel: [    0.000000] Booting paravirtualized kernel on bare hardware
Feb 24 12:34:40 psytux kernel: [    0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
Feb 24 12:34:40 psytux kernel: [    0.000000] PERCPU: Embedded 29 pages/cpu @ffff880001800000 s89880 r8192 d20712 u524288
Feb 24 12:34:40 psytux kernel: [    0.000000] pcpu-alloc: s89880 r8192 d20712 u524288 alloc=1*2097152
Feb 24 12:34:40 psytux kernel: [    0.000000] pcpu-alloc: [0] 0 1 2 3 
Feb 24 12:34:40 psytux kernel: [    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 498643
Feb 24 12:34:40 psytux kernel: [    0.000000] Policy zone: DMA32
Feb 24 12:34:40 psytux kernel: [    0.000000] Kernel command line: BOOT_IMAGE=//vmlinuz-2.6.32-trunk-amd64 root=/dev/mapper/psytux-root ro video=i915 quiet
Feb 24 12:34:40 psytux kernel: [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
Feb 24 12:34:40 psytux kernel: [    0.000000] Initializing CPU#0
Feb 24 12:34:40 psytux kernel: [    0.000000] Checking aperture...
Feb 24 12:34:40 psytux kernel: [    0.000000] No AGP bridge found
Feb 24 12:34:40 psytux kernel: [    0.000000] Calgary: detecting Calgary via BIOS EBDA area
Feb 24 12:34:40 psytux kernel: [    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Feb 24 12:34:40 psytux kernel: [    0.000000] Memory: 1976828k/2026496k available (2981k kernel code, 3812k absent, 45856k reserved, 1843k data, 576k init)
Feb 24 12:34:40 psytux kernel: [    0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Feb 24 12:34:40 psytux kernel: [    0.000000] Hierarchical RCU implementation.
Feb 24 12:34:40 psytux kernel: [    0.000000] NR_IRQS:4352 nr_irqs:440
Feb 24 12:34:40 psytux kernel: [    0.000000] Extended CMOS year: 2000
Feb 24 12:34:40 psytux kernel: [    0.000000] Console: colour dummy device 80x25
Feb 24 12:34:40 psytux kernel: [    0.000000] console [tty0] enabled
Feb 24 12:34:40 psytux kernel: [    0.000000] hpet clockevent registered
Feb 24 12:34:40 psytux kernel: [    0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Feb 24 12:34:40 psytux kernel: [    0.000000] Fast TSC calibration using PIT
Feb 24 12:34:40 psytux kernel: [    0.000000] Detected 2394.323 MHz processor.
Feb 24 12:34:40 psytux kernel: [    0.004013] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.64 BogoMIPS (lpj=9577292)
Feb 24 12:34:40 psytux kernel: [    0.004035] Security Framework initialized
Feb 24 12:34:40 psytux kernel: [    0.004041] SELinux:  Disabled at boot.
Feb 24 12:34:40 psytux kernel: [    0.004189] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Feb 24 12:34:40 psytux kernel: [    0.005436] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Feb 24 12:34:40 psytux kernel: [    0.008088] Mount-cache hash table entries: 256
Feb 24 12:34:40 psytux kernel: [    0.008248] Initializing cgroup subsys ns
Feb 24 12:34:40 psytux kernel: [    0.008253] Initializing cgroup subsys cpuacct
Feb 24 12:34:40 psytux kernel: [    0.008256] Initializing cgroup subsys devices
Feb 24 12:34:40 psytux kernel: [    0.008258] Initializing cgroup subsys freezer
Feb 24 12:34:40 psytux kernel: [    0.008260] Initializing cgroup subsys net_cls
Feb 24 12:34:40 psytux kernel: [    0.008283] CPU: L1 I cache: 32K, L1 D cache: 32K
Feb 24 12:34:40 psytux kernel: [    0.008285] CPU: L2 cache: 3072K
Feb 24 12:34:40 psytux kernel: [    0.008288] CPU 0/0x0 -> Node 0
Feb 24 12:34:40 psytux kernel: [    0.008290] CPU: Physical Processor ID: 0
Feb 24 12:34:40 psytux kernel: [    0.008292] CPU: Processor Core ID: 0
Feb 24 12:34:40 psytux kernel: [    0.008296] mce: CPU supports 6 MCE banks
Feb 24 12:34:40 psytux kernel: [    0.008302] CPU0: Thermal monitoring handled by SMI
Feb 24 12:34:40 psytux kernel: [    0.008306] using mwait in idle threads.
Feb 24 12:34:40 psytux kernel: [    0.008308] Performance Events: Core2 events, Intel PMU driver.
Feb 24 12:34:40 psytux kernel: [    0.008312] ... version:                2
Feb 24 12:34:40 psytux kernel: [    0.008314] ... bit width:              40
Feb 24 12:34:40 psytux kernel: [    0.008315] ... generic registers:      2
Feb 24 12:34:40 psytux kernel: [    0.008316] ... value mask:             000000ffffffffff
Feb 24 12:34:40 psytux kernel: [    0.008318] ... max period:             000000007fffffff
Feb 24 12:34:40 psytux kernel: [    0.008319] ... fixed-purpose events:   3
Feb 24 12:34:40 psytux kernel: [    0.008320] ... event mask:             0000000700000003
Feb 24 12:34:40 psytux kernel: [    0.009298] ACPI: Core revision 20090903
Feb 24 12:34:40 psytux kernel: [    0.035883] DMAR: Host address width 36
Feb 24 12:34:40 psytux kernel: [    0.035885] DMAR: DRHD base: 0x000000feb03000 flags: 0x0
Feb 24 12:34:40 psytux kernel: [    0.035891] IOMMU feb03000: ver 1:0 cap c9008020e30260 ecap 1000
Feb 24 12:34:40 psytux kernel: [    0.035893] DMAR: DRHD base: 0x000000feb01000 flags: 0x0
Feb 24 12:34:40 psytux kernel: [    0.035898] IOMMU feb01000: ver 1:0 cap c0000020630260 ecap 1000
Feb 24 12:34:40 psytux kernel: [    0.035900] DMAR: DRHD base: 0x000000feb02000 flags: 0x1
Feb 24 12:34:40 psytux kernel: [    0.035904] IOMMU feb02000: ver 1:0 cap c9008020630260 ecap 1000
Feb 24 12:34:40 psytux kernel: [    0.035906] DMAR: RMRR base: 0x8241311834011049 end: 0x20004a10e0d80a80
Feb 24 12:34:40 psytux kernel: [    0.035909] DMAR: RMRR base: 0x0000007bc00000 end: 0x0000007fffffff
Feb 24 12:34:40 psytux kernel: [    0.035911] DMAR: No ATSR found
Feb 24 12:34:40 psytux kernel: [    0.035932] Setting APIC routing to flat
Feb 24 12:34:40 psytux kernel: [    0.036381] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Feb 24 12:34:40 psytux kernel: [    0.076074] CPU0: Intel(R) Core(TM)2 Duo CPU     P8600  @ 2.40GHz stepping 06
Feb 24 12:34:40 psytux kernel: [    0.080001] Booting processor 1 APIC 0x1 ip 0x6000
Feb 24 12:34:40 psytux kernel: [    0.008000] Initializing CPU#1
Feb 24 12:34:40 psytux kernel: [    0.008000] Calibrating delay using timer specific routine.. 4787.96 BogoMIPS (lpj=9575932)
Feb 24 12:34:40 psytux kernel: [    0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
Feb 24 12:34:40 psytux kernel: [    0.008000] CPU: L2 cache: 3072K
Feb 24 12:34:40 psytux kernel: [    0.008000] CPU 1/0x1 -> Node 0
Feb 24 12:34:40 psytux kernel: [    0.008000] CPU: Physical Processor ID: 0
Feb 24 12:34:40 psytux kernel: [    0.008000] CPU: Processor Core ID: 1
Feb 24 12:34:40 psytux kernel: [    0.008000] CPU1: Thermal monitoring handled by SMI
Feb 24 12:34:40 psytux kernel: [    0.164050] CPU1: Intel(R) Core(TM)2 Duo CPU     P8600  @ 2.40GHz stepping 06
Feb 24 12:34:40 psytux kernel: [    0.164063] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Feb 24 12:34:40 psytux kernel: [    0.168015] Brought up 2 CPUs
Feb 24 12:34:40 psytux kernel: [    0.168018] Total of 2 processors activated (9576.61 BogoMIPS).
Feb 24 12:34:40 psytux kernel: [    0.168576] CPU0 attaching sched-domain:
Feb 24 12:34:40 psytux kernel: [    0.168579]  domain 0: span 0-1 level MC
Feb 24 12:34:40 psytux kernel: [    0.168581]   groups: 0 1
Feb 24 12:34:40 psytux kernel: [    0.168586] CPU1 attaching sched-domain:
Feb 24 12:34:40 psytux kernel: [    0.168588]  domain 0: span 0-1 level MC
Feb 24 12:34:40 psytux kernel: [    0.168590]   groups: 1 0
Feb 24 12:34:40 psytux kernel: [    0.168736] devtmpfs: initialized
Feb 24 12:34:40 psytux kernel: [    0.172125] regulator: core version 0.5
Feb 24 12:34:40 psytux kernel: [    0.172172] NET: Registered protocol family 16
Feb 24 12:34:40 psytux kernel: [    0.172269] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
Feb 24 12:34:40 psytux kernel: [    0.172272] ACPI: bus type pci registered
Feb 24 12:34:40 psytux kernel: [    0.172356] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
Feb 24 12:34:40 psytux kernel: [    0.172359] PCI: MCFG area at e0000000 reserved in E820
Feb 24 12:34:40 psytux kernel: [    0.183873] PCI: Using MMCONFIG at e0000000 - efffffff
Feb 24 12:34:40 psytux kernel: [    0.183875] PCI: Using configuration type 1 for base access
Feb 24 12:34:40 psytux kernel: [    0.184298] bio: create slab <bio-0> at 0
Feb 24 12:34:40 psytux kernel: [    0.185318] ACPI: EC: Look up EC in DSDT
Feb 24 12:34:40 psytux kernel: [    0.201765] ACPI: BIOS _OSI(Linux) query ignored
Feb 24 12:34:40 psytux kernel: [    0.260147] ACPI: Interpreter enabled
Feb 24 12:34:40 psytux kernel: [    0.260152] ACPI: (supports S0 S3 S4 S5)
Feb 24 12:34:40 psytux kernel: [    0.260171] ACPI: Using IOAPIC for interrupt routing
Feb 24 12:34:40 psytux kernel: [    0.274543] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
Feb 24 12:34:40 psytux kernel: [    0.274611] ACPI: Power Resource [APPR] (off)
Feb 24 12:34:40 psytux kernel: [    0.274814] ACPI: Power Resource [COMP] (on)
Feb 24 12:34:40 psytux kernel: [    0.275001] ACPI: Power Resource [LPP] (on)
Feb 24 12:34:40 psytux kernel: [    0.275099] ACPI: Power Resource [PFN0] (off)
Feb 24 12:34:40 psytux kernel: [    0.275193] ACPI: Power Resource [PFN1] (off)
Feb 24 12:34:40 psytux kernel: [    0.275288] ACPI: Power Resource [PFN2] (off)
Feb 24 12:34:40 psytux kernel: [    0.275382] ACPI: Power Resource [PFN3] (off)
Feb 24 12:34:40 psytux kernel: [    0.275476] ACPI: Power Resource [PFN4] (off)
Feb 24 12:34:40 psytux kernel: [    0.275811] ACPI: No dock devices found.
Feb 24 12:34:40 psytux kernel: [    0.277079] ACPI: PCI Root Bridge [PCI0] (0000:00)
Feb 24 12:34:40 psytux kernel: [    0.277130] DMAR: Forcing write-buffer flush capability
Feb 24 12:34:40 psytux kernel: [    0.277167] pci 0000:00:02.0: reg 10 64bit mmio: [0x98000000-0x983fffff]
Feb 24 12:34:40 psytux kernel: [    0.277173] pci 0000:00:02.0: reg 18 64bit mmio pref: [0x80000000-0x8fffffff]
Feb 24 12:34:40 psytux kernel: [    0.277177] pci 0000:00:02.0: reg 20 io port: [0x60f0-0x60f7]
Feb 24 12:34:40 psytux kernel: [    0.277208] pci 0000:00:02.1: reg 10 64bit mmio: [0x98400000-0x984fffff]
Feb 24 12:34:40 psytux kernel: [    0.277414] pci 0000:00:1a.0: reg 20 io port: [0x60c0-0x60df]
Feb 24 12:34:40 psytux kernel: [    0.277538] pci 0000:00:1a.1: reg 20 io port: [0x60a0-0x60bf]
Feb 24 12:34:40 psytux kernel: [    0.277650] pci 0000:00:1a.2: reg 20 io port: [0x6080-0x609f]
Feb 24 12:34:40 psytux kernel: [    0.277801] pci 0000:00:1a.7: reg 10 32bit mmio: [0x98904c00-0x98904fff]
Feb 24 12:34:40 psytux kernel: [    0.277884] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
Feb 24 12:34:40 psytux kernel: [    0.277895] pci 0000:00:1a.7: PME# disabled
Feb 24 12:34:40 psytux kernel: [    0.277981] pci 0000:00:1b.0: reg 10 64bit mmio: [0x98900000-0x98903fff]
Feb 24 12:34:40 psytux kernel: [    0.278049] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Feb 24 12:34:40 psytux kernel: [    0.278059] pci 0000:00:1b.0: PME# disabled
Feb 24 12:34:40 psytux kernel: [    0.278186] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Feb 24 12:34:40 psytux kernel: [    0.278196] pci 0000:00:1c.0: PME# disabled
Feb 24 12:34:40 psytux kernel: [    0.278313] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
Feb 24 12:34:40 psytux kernel: [    0.278323] pci 0000:00:1c.1: PME# disabled
Feb 24 12:34:40 psytux kernel: [    0.278447] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
Feb 24 12:34:40 psytux kernel: [    0.278457] pci 0000:00:1c.2: PME# disabled
Feb 24 12:34:40 psytux kernel: [    0.278588] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
Feb 24 12:34:40 psytux kernel: [    0.278598] pci 0000:00:1c.4: PME# disabled
Feb 24 12:34:40 psytux kernel: [    0.278722] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
Feb 24 12:34:40 psytux kernel: [    0.278732] pci 0000:00:1c.5: PME# disabled
Feb 24 12:34:40 psytux kernel: [    0.278838] pci 0000:00:1d.0: reg 20 io port: [0x6060-0x607f]
Feb 24 12:34:40 psytux kernel: [    0.278958] pci 0000:00:1d.1: reg 20 io port: [0x6040-0x605f]
Feb 24 12:34:40 psytux kernel: [    0.279083] pci 0000:00:1d.2: reg 20 io port: [0x6020-0x603f]
Feb 24 12:34:40 psytux kernel: [    0.279233] pci 0000:00:1d.7: reg 10 32bit mmio: [0x98904800-0x98904bff]
Feb 24 12:34:40 psytux kernel: [    0.279313] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
Feb 24 12:34:40 psytux kernel: [    0.279324] pci 0000:00:1d.7: PME# disabled
Feb 24 12:34:40 psytux kernel: [    0.279651] pci 0000:00:1f.2: reg 10 io port: [0x60e8-0x60ef]
Feb 24 12:34:40 psytux kernel: [    0.279664] pci 0000:00:1f.2: reg 14 io port: [0x60fc-0x60ff]
Feb 24 12:34:40 psytux kernel: [    0.279677] pci 0000:00:1f.2: reg 18 io port: [0x60e0-0x60e7]
Feb 24 12:34:40 psytux kernel: [    0.279689] pci 0000:00:1f.2: reg 1c io port: [0x60f8-0x60fb]
Feb 24 12:34:40 psytux kernel: [    0.279702] pci 0000:00:1f.2: reg 20 io port: [0x6000-0x601f]
Feb 24 12:34:40 psytux kernel: [    0.279715] pci 0000:00:1f.2: reg 24 32bit mmio: [0x98904000-0x989047ff]
Feb 24 12:34:40 psytux kernel: [    0.279770] pci 0000:00:1f.2: PME# supported from D3hot
Feb 24 12:34:40 psytux kernel: [    0.279779] pci 0000:00:1f.2: PME# disabled
Feb 24 12:34:40 psytux kernel: [    0.279965] pci 0000:00:1c.0: bridge 32bit mmio: [0x98800000-0x988fffff]
Feb 24 12:34:40 psytux kernel: [    0.280097] pci 0000:02:00.0: reg 10 64bit mmio: [0x98700000-0x98701fff]
Feb 24 12:34:40 psytux kernel: [    0.280225] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
Feb 24 12:34:40 psytux kernel: [    0.280238] pci 0000:02:00.0: PME# disabled
Feb 24 12:34:40 psytux kernel: [    0.280394] pci 0000:00:1c.1: bridge 32bit mmio: [0x98700000-0x987fffff]
Feb 24 12:34:40 psytux kernel: [    0.280537] pci 0000:00:1c.2: bridge io port: [0x4000-0x5fff]
Feb 24 12:34:40 psytux kernel: [    0.280547] pci 0000:00:1c.2: bridge 32bit mmio: [0x94000000-0x97ffffff]
Feb 24 12:34:40 psytux kernel: [    0.280689] pci 0000:00:1c.4: bridge io port: [0x2000-0x3fff]
Feb 24 12:34:40 psytux kernel: [    0.280699] pci 0000:00:1c.4: bridge 32bit mmio: [0x90000000-0x93ffffff]
Feb 24 12:34:40 psytux kernel: [    0.281089] pci 0000:85:00.0: reg 10 64bit mmio: [0x98600000-0x9860ffff]
Feb 24 12:34:40 psytux kernel: [    0.281510] pci 0000:85:00.0: PME# supported from D3hot D3cold
Feb 24 12:34:40 psytux kernel: [    0.281535] pci 0000:85:00.0: PME# disabled
Feb 24 12:34:40 psytux kernel: [    0.281725] pci 0000:00:1c.5: bridge 32bit mmio: [0x98600000-0x986fffff]
Feb 24 12:34:40 psytux kernel: [    0.281794] pci 0000:86:02.0: reg 10 32bit mmio: [0x98500000-0x98500fff]
Feb 24 12:34:40 psytux kernel: [    0.281873] pci 0000:86:02.0: supports D1 D2
Feb 24 12:34:40 psytux kernel: [    0.281875] pci 0000:86:02.0: PME# supported from D0 D1 D2 D3hot
Feb 24 12:34:40 psytux kernel: [    0.281885] pci 0000:86:02.0: PME# disabled
Feb 24 12:34:40 psytux kernel: [    0.282001] pci 0000:00:1e.0: transparent bridge
Feb 24 12:34:40 psytux kernel: [    0.282013] pci 0000:00:1e.0: bridge 32bit mmio: [0x98500000-0x985fffff]
Feb 24 12:34:40 psytux kernel: [    0.282074] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Feb 24 12:34:40 psytux kernel: [    0.282291] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
Feb 24 12:34:40 psytux kernel: [    0.282370] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
Feb 24 12:34:40 psytux kernel: [    0.282456] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
Feb 24 12:34:40 psytux kernel: [    0.282592] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
Feb 24 12:34:40 psytux kernel: [    0.282724] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
Feb 24 12:34:40 psytux kernel: [    0.282844] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
Feb 24 12:34:40 psytux kernel: [    0.301070] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
Feb 24 12:34:40 psytux kernel: [    0.301200] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
Feb 24 12:34:40 psytux kernel: [    0.301331] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
Feb 24 12:34:40 psytux kernel: [    0.301460] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
Feb 24 12:34:40 psytux kernel: [    0.301588] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
Feb 24 12:34:40 psytux kernel: [    0.301716] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
Feb 24 12:34:40 psytux kernel: [    0.301844] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
Feb 24 12:34:40 psytux kernel: [    0.301971] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
Feb 24 12:34:40 psytux kernel: [    0.302081] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
Feb 24 12:34:40 psytux kernel: [    0.302092] vgaarb: loaded
Feb 24 12:34:40 psytux kernel: [    0.302153] PCI: Using ACPI for IRQ routing
Feb 24 12:34:40 psytux kernel: [    0.302626] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
Feb 24 12:34:40 psytux kernel: [    0.302630] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Feb 24 12:34:40 psytux kernel: [    0.308008] Switching to clocksource tsc
Feb 24 12:34:40 psytux kernel: [    0.309082] pnp: PnP ACPI init
Feb 24 12:34:40 psytux kernel: [    0.309091] ACPI: bus type pnp registered
Feb 24 12:34:40 psytux kernel: [    0.314036]   alloc irq_desc for 23 on node 0
Feb 24 12:34:40 psytux kernel: [    0.314038]   alloc kstat_irqs on node 0
Feb 24 12:34:40 psytux kernel: [    0.314510] pnp: PnP ACPI: found 14 devices
Feb 24 12:34:40 psytux kernel: [    0.314512] ACPI: ACPI bus type pnp unregistered
Feb 24 12:34:40 psytux kernel: [    0.314521] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
Feb 24 12:34:40 psytux kernel: [    0.314523] system 00:01: iomem range 0xfed10000-0xfed13fff has been reserved
Feb 24 12:34:40 psytux kernel: [    0.314526] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
Feb 24 12:34:40 psytux kernel: [    0.314528] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
Feb 24 12:34:40 psytux kernel: [    0.314531] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
Feb 24 12:34:40 psytux kernel: [    0.314533] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
Feb 24 12:34:40 psytux kernel: [    0.314536] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
Feb 24 12:34:40 psytux kernel: [    0.314538] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
Feb 24 12:34:40 psytux kernel: [    0.314544] system 00:05: iomem range 0xfed00000-0xfed003ff has been reserved
Feb 24 12:34:40 psytux kernel: [    0.314549] system 00:07: ioport range 0x200-0x27f has been reserved
Feb 24 12:34:40 psytux kernel: [    0.314552] system 00:07: ioport range 0x1000-0x1003 has been reserved
Feb 24 12:34:40 psytux kernel: [    0.314554] system 00:07: ioport range 0x1010-0x101f has been reserved
Feb 24 12:34:40 psytux kernel: [    0.314556] system 00:07: ioport range 0xffff-0xffff has been reserved
Feb 24 12:34:40 psytux kernel: [    0.314559] system 00:07: ioport range 0x400-0x47f has been reserved
Feb 24 12:34:40 psytux kernel: [    0.314561] system 00:07: ioport range 0x500-0x57f has been reserved
Feb 24 12:34:40 psytux kernel: [    0.314563] system 00:07: ioport range 0xef80-0xef9f has been reserved
Feb 24 12:34:40 psytux kernel: [    0.319401] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
Feb 24 12:34:40 psytux kernel: [    0.319410] pci 0000:00:1c.0:   IO window: 0x7000-0x7fff
Feb 24 12:34:40 psytux kernel: [    0.319422] pci 0000:00:1c.0:   MEM window: 0x98800000-0x988fffff
Feb 24 12:34:40 psytux kernel: [    0.319432] pci 0000:00:1c.0:   PREFETCH window: 0x00000098a00000-0x00000098bfffff
Feb 24 12:34:40 psytux kernel: [    0.319445] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
Feb 24 12:34:40 psytux kernel: [    0.319454] pci 0000:00:1c.1:   IO window: 0x8000-0x8fff
Feb 24 12:34:40 psytux kernel: [    0.319466] pci 0000:00:1c.1:   MEM window: 0x98700000-0x987fffff
Feb 24 12:34:40 psytux kernel: [    0.319476] pci 0000:00:1c.1:   PREFETCH window: 0x00000098c00000-0x00000098dfffff
Feb 24 12:34:40 psytux kernel: [    0.319489] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
Feb 24 12:34:40 psytux kernel: [    0.319498] pci 0000:00:1c.2:   IO window: 0x4000-0x5fff
Feb 24 12:34:40 psytux kernel: [    0.319510] pci 0000:00:1c.2:   MEM window: 0x94000000-0x97ffffff
Feb 24 12:34:40 psytux kernel: [    0.319520] pci 0000:00:1c.2:   PREFETCH window: 0x00000098e00000-0x00000098ffffff
Feb 24 12:34:40 psytux kernel: [    0.319533] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:44
Feb 24 12:34:40 psytux kernel: [    0.319542] pci 0000:00:1c.4:   IO window: 0x2000-0x3fff
Feb 24 12:34:40 psytux kernel: [    0.319554] pci 0000:00:1c.4:   MEM window: 0x90000000-0x93ffffff
Feb 24 12:34:40 psytux kernel: [    0.319564] pci 0000:00:1c.4:   PREFETCH window: 0x00000099000000-0x000000991fffff
Feb 24 12:34:40 psytux kernel: [    0.319577] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:85
Feb 24 12:34:40 psytux kernel: [    0.319585] pci 0000:00:1c.5:   IO window: 0x9000-0x9fff
Feb 24 12:34:40 psytux kernel: [    0.319597] pci 0000:00:1c.5:   MEM window: 0x98600000-0x986fffff
Feb 24 12:34:40 psytux kernel: [    0.319607] pci 0000:00:1c.5:   PREFETCH window: 0x00000099200000-0x000000993fffff
Feb 24 12:34:40 psytux kernel: [    0.319620] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:86
Feb 24 12:34:40 psytux kernel: [    0.319621] pci 0000:00:1e.0:   IO window: disabled
Feb 24 12:34:40 psytux kernel: [    0.319632] pci 0000:00:1e.0:   MEM window: 0x98500000-0x985fffff
Feb 24 12:34:40 psytux kernel: [    0.319642] pci 0000:00:1e.0:   PREFETCH window: disabled
Feb 24 12:34:40 psytux kernel: [    0.319679]   alloc irq_desc for 16 on node -1
Feb 24 12:34:40 psytux kernel: [    0.319681]   alloc kstat_irqs on node -1
Feb 24 12:34:40 psytux kernel: [    0.319685] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Feb 24 12:34:40 psytux kernel: [    0.319699] pci 0000:00:1c.0: setting latency timer to 64
Feb 24 12:34:40 psytux kernel: [    0.319713]   alloc irq_desc for 17 on node -1
Feb 24 12:34:40 psytux kernel: [    0.319715]   alloc kstat_irqs on node -1
Feb 24 12:34:40 psytux kernel: [    0.319718] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Feb 24 12:34:40 psytux kernel: [    0.319725] pci 0000:00:1c.1: setting latency timer to 64
Feb 24 12:34:40 psytux kernel: [    0.319748]   alloc irq_desc for 18 on node -1
Feb 24 12:34:40 psytux kernel: [    0.319749]   alloc kstat_irqs on node -1
Feb 24 12:34:40 psytux kernel: [    0.319752] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Feb 24 12:34:40 psytux kernel: [    0.319760] pci 0000:00:1c.2: setting latency timer to 64
Feb 24 12:34:40 psytux kernel: [    0.319781] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Feb 24 12:34:40 psytux kernel: [    0.319791] pci 0000:00:1c.4: setting latency timer to 64
Feb 24 12:34:40 psytux kernel: [    0.319812] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Feb 24 12:34:40 psytux kernel: [    0.319822] pci 0000:00:1c.5: setting latency timer to 64
Feb 24 12:34:40 psytux kernel: [    0.319847] pci 0000:00:1e.0: setting latency timer to 64
Feb 24 12:34:40 psytux kernel: [    0.319857] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
Feb 24 12:34:40 psytux kernel: [    0.319859] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
Feb 24 12:34:40 psytux kernel: [    0.319861] pci_bus 0000:01: resource 0 io:  [0x7000-0x7fff]
Feb 24 12:34:40 psytux kernel: [    0.319863] pci_bus 0000:01: resource 1 mem: [0x98800000-0x988fffff]
Feb 24 12:34:40 psytux kernel: [    0.319865] pci_bus 0000:01: resource 2 pref mem [0x98a00000-0x98bfffff]
Feb 24 12:34:40 psytux kernel: [    0.319867] pci_bus 0000:02: resource 0 io:  [0x8000-0x8fff]
Feb 24 12:34:40 psytux kernel: [    0.319869] pci_bus 0000:02: resource 1 mem: [0x98700000-0x987fffff]
Feb 24 12:34:40 psytux kernel: [    0.319872] pci_bus 0000:02: resource 2 pref mem [0x98c00000-0x98dfffff]
Feb 24 12:34:40 psytux kernel: [    0.319874] pci_bus 0000:03: resource 0 io:  [0x4000-0x5fff]
Feb 24 12:34:40 psytux kernel: [    0.319885] pci_bus 0000:03: resource 1 mem: [0x94000000-0x97ffffff]
Feb 24 12:34:40 psytux kernel: [    0.319887] pci_bus 0000:03: resource 2 pref mem [0x98e00000-0x98ffffff]
Feb 24 12:34:40 psytux kernel: [    0.319890] pci_bus 0000:44: resource 0 io:  [0x2000-0x3fff]
Feb 24 12:34:40 psytux kernel: [    0.319891] pci_bus 0000:44: resource 1 mem: [0x90000000-0x93ffffff]
Feb 24 12:34:40 psytux kernel: [    0.319894] pci_bus 0000:44: resource 2 pref mem [0x99000000-0x991fffff]
Feb 24 12:34:40 psytux kernel: [    0.319896] pci_bus 0000:85: resource 0 io:  [0x9000-0x9fff]
Feb 24 12:34:40 psytux kernel: [    0.319898] pci_bus 0000:85: resource 1 mem: [0x98600000-0x986fffff]
Feb 24 12:34:40 psytux kernel: [    0.319900] pci_bus 0000:85: resource 2 pref mem [0x99200000-0x993fffff]
Feb 24 12:34:40 psytux kernel: [    0.319902] pci_bus 0000:86: resource 1 mem: [0x98500000-0x985fffff]
Feb 24 12:34:40 psytux kernel: [    0.319904] pci_bus 0000:86: resource 3 io:  [0x00-0xffff]
Feb 24 12:34:40 psytux kernel: [    0.319906] pci_bus 0000:86: resource 4 mem: [0x000000-0xffffffffffffffff]
Feb 24 12:34:40 psytux kernel: [    0.320021] NET: Registered protocol family 2
Feb 24 12:34:40 psytux kernel: [    0.320145] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
Feb 24 12:34:40 psytux kernel: [    0.320891] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
Feb 24 12:34:40 psytux kernel: [    0.322933] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Feb 24 12:34:40 psytux kernel: [    0.323536] TCP: Hash tables configured (established 262144 bind 65536)
Feb 24 12:34:40 psytux kernel: [    0.323539] TCP reno registered
Feb 24 12:34:40 psytux kernel: [    0.323675] NET: Registered protocol family 1
Feb 24 12:34:40 psytux kernel: [    0.323697] pci 0000:00:02.0: Boot video device
Feb 24 12:34:40 psytux kernel: [    0.324079] Unpacking initramfs...
Feb 24 12:34:40 psytux kernel: [    0.538967] Freeing initrd memory: 9863k freed
Feb 24 12:34:40 psytux kernel: [    0.544964] audit: initializing netlink socket (disabled)
Feb 24 12:34:40 psytux kernel: [    0.544978] type=2000 audit(1267011247.543:1): initialized
Feb 24 12:34:40 psytux kernel: [    0.545201] HugeTLB registered 2 MB page size, pre-allocated 0 pages
Feb 24 12:34:40 psytux kernel: [    0.546455] VFS: Disk quotas dquot_6.5.2
Feb 24 12:34:40 psytux kernel: [    0.546504] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Feb 24 12:34:40 psytux kernel: [    0.546582] msgmni has been set to 3880
Feb 24 12:34:40 psytux kernel: [    0.546756] alg: No test for stdrng (krng)
Feb 24 12:34:40 psytux kernel: [    0.546803] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Feb 24 12:34:40 psytux kernel: [    0.546807] io scheduler noop registered
Feb 24 12:34:40 psytux kernel: [    0.546809] io scheduler anticipatory registered
Feb 24 12:34:40 psytux kernel: [    0.546810] io scheduler deadline registered
Feb 24 12:34:40 psytux kernel: [    0.546838] io scheduler cfq registered (default)
Feb 24 12:34:40 psytux kernel: [    0.547018]   alloc irq_desc for 24 on node -1
Feb 24 12:34:40 psytux kernel: [    0.547020]   alloc kstat_irqs on node -1
Feb 24 12:34:40 psytux kernel: [    0.547044] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
Feb 24 12:34:40 psytux kernel: [    0.547080] pcieport 0000:00:1c.0: setting latency timer to 64
Feb 24 12:34:40 psytux kernel: [    0.547264]   alloc irq_desc for 25 on node -1
Feb 24 12:34:40 psytux kernel: [    0.547266]   alloc kstat_irqs on node -1
Feb 24 12:34:40 psytux kernel: [    0.547279] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
Feb 24 12:34:40 psytux kernel: [    0.547301] pcieport 0000:00:1c.1: setting latency timer to 64
Feb 24 12:34:40 psytux kernel: [    0.547476]   alloc irq_desc for 26 on node -1
Feb 24 12:34:40 psytux kernel: [    0.547477]   alloc kstat_irqs on node -1
Feb 24 12:34:40 psytux kernel: [    0.547491] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
Feb 24 12:34:40 psytux kernel: [    0.547512] pcieport 0000:00:1c.2: setting latency timer to 64
Feb 24 12:34:40 psytux kernel: [    0.547689]   alloc irq_desc for 27 on node -1
Feb 24 12:34:40 psytux kernel: [    0.547691]   alloc kstat_irqs on node -1
Feb 24 12:34:40 psytux kernel: [    0.547704] pcieport 0000:00:1c.4: irq 27 for MSI/MSI-X
Feb 24 12:34:40 psytux kernel: [    0.547726] pcieport 0000:00:1c.4: setting latency timer to 64
Feb 24 12:34:40 psytux kernel: [    0.547928]   alloc irq_desc for 28 on node -1
Feb 24 12:34:40 psytux kernel: [    0.547929]   alloc kstat_irqs on node -1
Feb 24 12:34:40 psytux kernel: [    0.547943] pcieport 0000:00:1c.5: irq 28 for MSI/MSI-X
Feb 24 12:34:40 psytux kernel: [    0.547965] pcieport 0000:00:1c.5: setting latency timer to 64
Feb 24 12:34:40 psytux kernel: [    0.548357] vesafb: framebuffer at 0x80000000, mapped to 0xffffc90010980000, using 5120k, total 5120k
Feb 24 12:34:40 psytux kernel: [    0.548360] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
Feb 24 12:34:40 psytux kernel: [    0.548362] vesafb: scrolling: redraw
Feb 24 12:34:40 psytux kernel: [    0.548364] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Feb 24 12:34:40 psytux kernel: [    0.588241] Console: switching to colour frame buffer device 160x64
Feb 24 12:34:40 psytux kernel: [    0.628004] fb0: VESA VGA frame buffer device
Feb 24 12:34:40 psytux kernel: [    0.629408] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Feb 24 12:34:40 psytux kernel: [    0.629536] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Feb 24 12:34:40 psytux kernel: [    0.629892] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Feb 24 12:34:40 psytux kernel: [    0.630038] input: Macintosh mouse button emulation as /devices/virtual/input/input0
Feb 24 12:34:40 psytux kernel: [    0.630095] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Feb 24 12:34:40 psytux kernel: [    0.631745] i8042.c: Detected active multiplexing controller, rev 1.1.
Feb 24 12:34:40 psytux kernel: [    0.632539] serio: i8042 KBD port at 0x60,0x64 irq 1
Feb 24 12:34:40 psytux kernel: [    0.632543] serio: i8042 AUX0 port at 0x60,0x64 irq 12
Feb 24 12:34:40 psytux kernel: [    0.632566] serio: i8042 AUX1 port at 0x60,0x64 irq 12
Feb 24 12:34:40 psytux kernel: [    0.632584] serio: i8042 AUX2 port at 0x60,0x64 irq 12
Feb 24 12:34:40 psytux kernel: [    0.632603] serio: i8042 AUX3 port at 0x60,0x64 irq 12
Feb 24 12:34:40 psytux kernel: [    0.632698] mice: PS/2 mouse device common for all mice
Feb 24 12:34:40 psytux kernel: [    0.632717] Driver 'rtc_cmos' needs updating - please use bus_type methods
Feb 24 12:34:40 psytux kernel: [    0.632774] rtc_cmos 00:08: RTC can wake from S4
Feb 24 12:34:40 psytux kernel: [    0.632807] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
Feb 24 12:34:40 psytux kernel: [    0.632854] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
Feb 24 12:34:40 psytux kernel: [    0.632865] cpuidle: using governor ladder
Feb 24 12:34:40 psytux kernel: [    0.632867] cpuidle: using governor menu
Feb 24 12:34:40 psytux kernel: [    0.632871] No iBFT detected.
Feb 24 12:34:40 psytux kernel: [    0.633138] TCP cubic registered
Feb 24 12:34:40 psytux kernel: [    0.633241] NET: Registered protocol family 10
Feb 24 12:34:40 psytux kernel: [    0.633680] lo: Disabled Privacy Extensions
Feb 24 12:34:40 psytux kernel: [    0.633913] Mobile IPv6
Feb 24 12:34:40 psytux kernel: [    0.633916] NET: Registered protocol family 17
Feb 24 12:34:40 psytux kernel: [    0.633987] registered taskstats version 1
Feb 24 12:34:40 psytux kernel: [    0.634884] rtc_cmos 00:08: setting system clock to 2010-02-24 11:34:07 UTC (1267011247)
Feb 24 12:34:40 psytux kernel: [    0.634956] Freeing unused kernel memory: 576k freed
Feb 24 12:34:40 psytux kernel: [    0.635205] Write protecting the kernel read-only data: 4096k
Feb 24 12:34:40 psytux kernel: [    0.654345] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Feb 24 12:34:40 psytux kernel: [    0.708311] Linux agpgart interface v0.103
Feb 24 12:34:40 psytux kernel: [    0.709992] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset
Feb 24 12:34:40 psytux kernel: [    0.710919] agpgart-intel 0000:00:00.0: detected 65532K stolen memory
Feb 24 12:34:40 psytux kernel: [    0.713576] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
Feb 24 12:34:40 psytux kernel: [    0.721576] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
Feb 24 12:34:40 psytux kernel: [    0.721582] ACPI: Sleep Button [SLPB]
Feb 24 12:34:40 psytux kernel: [    0.721625] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
Feb 24 12:34:40 psytux kernel: [    0.721744] ACPI: Lid Switch [LID]
Feb 24 12:34:40 psytux kernel: [    0.721791] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
Feb 24 12:34:40 psytux kernel: [    0.721795] ACPI: Power Button [PWRF]
Feb 24 12:34:40 psytux kernel: [    0.732304] [drm] Initialized drm 1.1.0 20060810
Feb 24 12:34:40 psytux kernel: [    0.743618] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Feb 24 12:34:40 psytux kernel: [    0.743622] i915 0000:00:02.0: setting latency timer to 64
Feb 24 12:34:40 psytux kernel: [    0.758588]   alloc irq_desc for 29 on node -1
Feb 24 12:34:40 psytux kernel: [    0.758592]   alloc kstat_irqs on node -1
Feb 24 12:34:40 psytux kernel: [    0.758601] i915 0000:00:02.0: irq 29 for MSI/MSI-X
Feb 24 12:34:40 psytux kernel: [    0.758608] [drm] set up 63M of stolen space
Feb 24 12:34:40 psytux kernel: [    1.320148] [drm] TV-20: set mode NTSC 480i 0
Feb 24 12:34:40 psytux kernel: [    1.466907] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
Feb 24 12:34:40 psytux kernel: [    1.467017] fb1: inteldrmfb frame buffer device
Feb 24 12:34:40 psytux kernel: [    1.467018] registered panic notifier
Feb 24 12:34:40 psytux kernel: [    1.468011] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (000000005) is beyond end of object (20090903/exoparg2-445)
Feb 24 12:34:40 psytux kernel: [    1.468022] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.GFX0._DOD] (Node ffff88007b32f6a0), AE_AML_PACKAGE_LIMIT
Feb 24 12:34:40 psytux kernel: [    1.468062] ACPI Exception: AE_AML_PACKAGE_LIMIT, Evaluating _DOD (20090903/video-1882)
Feb 24 12:34:40 psytux kernel: [    1.469765] acpi device:05: registered as cooling_device0
Feb 24 12:34:40 psytux kernel: [    1.470118] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
Feb 24 12:34:40 psytux kernel: [    1.470124] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
Feb 24 12:34:40 psytux kernel: [    1.470155] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Feb 24 12:34:40 psytux kernel: [    1.484254] fan PNP0C0B:00: registered as cooling_device1
Feb 24 12:34:40 psytux kernel: [    1.484259] ACPI: Fan [FAN0] (off)
Feb 24 12:34:40 psytux kernel: [    1.484450] fan PNP0C0B:01: registered as cooling_device2
Feb 24 12:34:40 psytux kernel: [    1.484455] ACPI: Fan [FAN1] (off)
Feb 24 12:34:40 psytux kernel: [    1.484652] fan PNP0C0B:02: registered as cooling_device3
Feb 24 12:34:40 psytux kernel: [    1.484657] ACPI: Fan [FAN2] (off)
Feb 24 12:34:40 psytux kernel: [    1.484849] fan PNP0C0B:03: registered as cooling_device4
Feb 24 12:34:40 psytux kernel: [    1.484854] ACPI: Fan [FAN3] (off)
Feb 24 12:34:40 psytux kernel: [    1.485044] fan PNP0C0B:04: registered as cooling_device5
Feb 24 12:34:40 psytux kernel: [    1.485049] ACPI: Fan [FAN4] (off)
Feb 24 12:34:40 psytux kernel: [    1.497556] thermal LNXTHERM:01: registered as thermal_zone0
Feb 24 12:34:40 psytux kernel: [    1.497563] ACPI: Thermal Zone [DTSZ] (24 C)
Feb 24 12:34:40 psytux kernel: [    1.506679] thermal LNXTHERM:02: registered as thermal_zone1
Feb 24 12:34:40 psytux kernel: [    1.506686] ACPI: Thermal Zone [CPUZ] (36 C)
Feb 24 12:34:40 psytux kernel: [    1.511031] thermal LNXTHERM:03: registered as thermal_zone2
Feb 24 12:34:40 psytux kernel: [    1.511038] ACPI: Thermal Zone [SKNZ] (26 C)
Feb 24 12:34:40 psytux kernel: [    1.519997] thermal LNXTHERM:04: registered as thermal_zone3
Feb 24 12:34:40 psytux kernel: [    1.520009] ACPI: Thermal Zone [BATZ] (28 C)
Feb 24 12:34:40 psytux kernel: [    1.523776] thermal LNXTHERM:05: registered as thermal_zone4
Feb 24 12:34:40 psytux kernel: [    1.523783] ACPI: Thermal Zone [FDTZ] (21 C)
Feb 24 12:34:40 psytux kernel: [    1.589523] usbcore: registered new interface driver usbfs
Feb 24 12:34:40 psytux kernel: [    1.589548] usbcore: registered new interface driver hub
Feb 24 12:34:40 psytux kernel: [    1.610696] usbcore: registered new device driver usb
Feb 24 12:34:40 psytux kernel: [    1.628303] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Feb 24 12:34:40 psytux kernel: [    1.628364]   alloc irq_desc for 19 on node -1
Feb 24 12:34:40 psytux kernel: [    1.628366]   alloc kstat_irqs on node -1
Feb 24 12:34:40 psytux kernel: [    1.628374] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Feb 24 12:34:40 psytux kernel: [    1.628404] ehci_hcd 0000:00:1a.7: setting latency timer to 64
Feb 24 12:34:40 psytux kernel: [    1.628413] ehci_hcd 0000:00:1a.7: EHCI Host Controller
Feb 24 12:34:40 psytux kernel: [    1.628435] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
Feb 24 12:34:40 psytux kernel: [    1.628488] ehci_hcd 0000:00:1a.7: debug port 1
Feb 24 12:34:40 psytux kernel: [    1.632448] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
Feb 24 12:34:40 psytux kernel: [    1.632469] ehci_hcd 0000:00:1a.7: irq 19, io mem 0x98904c00
Feb 24 12:34:40 psytux kernel: [    1.634155] tg3.c:v3.102 (September 1, 2009)
Feb 24 12:34:40 psytux kernel: [    1.634236] tg3 0000:85:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Feb 24 12:34:40 psytux kernel: [    1.634261] tg3 0000:85:00.0: setting latency timer to 64
Feb 24 12:34:40 psytux kernel: [    1.636485] SCSI subsystem initialized
Feb 24 12:34:40 psytux kernel: [    1.638095] firewire_ohci 0000:86:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Feb 24 12:34:40 psytux kernel: [    1.638113] firewire_ohci 0000:86:02.0: setting latency timer to 64
Feb 24 12:34:40 psytux kernel: [    1.663360] libata version 3.00 loaded.
Feb 24 12:34:40 psytux kernel: [    1.668515] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
Feb 24 12:34:40 psytux kernel: [    1.668539] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Feb 24 12:34:40 psytux kernel: [    1.668542] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 24 12:34:40 psytux kernel: [    1.668544] usb usb1: Product: EHCI Host Controller
Feb 24 12:34:40 psytux kernel: [    1.668546] usb usb1: Manufacturer: Linux 2.6.32-trunk-amd64 ehci_hcd
Feb 24 12:34:40 psytux kernel: [    1.668547] usb usb1: SerialNumber: 0000:00:1a.7
Feb 24 12:34:40 psytux kernel: [    1.668619] usb usb1: configuration #1 chosen from 1 choice
Feb 24 12:34:40 psytux kernel: [    1.668646] hub 1-0:1.0: USB hub found
Feb 24 12:34:40 psytux kernel: [    1.668653] hub 1-0:1.0: 6 ports detected
Feb 24 12:34:40 psytux kernel: [    1.668776] ahci 0000:00:1f.2: version 3.0
Feb 24 12:34:40 psytux kernel: [    1.668810]   alloc irq_desc for 21 on node -1
Feb 24 12:34:40 psytux kernel: [    1.668812]   alloc kstat_irqs on node -1
Feb 24 12:34:40 psytux kernel: [    1.668819] ahci 0000:00:1f.2: PCI INT A -> GSI 21 (level, low) -> IRQ 21
Feb 24 12:34:40 psytux kernel: [    1.668862]   alloc irq_desc for 30 on node -1
Feb 24 12:34:40 psytux kernel: [    1.668864]   alloc kstat_irqs on node -1
Feb 24 12:34:40 psytux kernel: [    1.668878] ahci 0000:00:1f.2: irq 30 for MSI/MSI-X
Feb 24 12:34:40 psytux kernel: [    1.668941] ahci: SSS flag set, parallel bus scan disabled
Feb 24 12:34:40 psytux kernel: [    1.668983] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x23 impl SATA mode
Feb 24 12:34:40 psytux kernel: [    1.668986] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs 
Feb 24 12:34:40 psytux kernel: [    1.669003] ahci 0000:00:1f.2: setting latency timer to 64
Feb 24 12:34:40 psytux kernel: [    1.684268] scsi0 : ahci
Feb 24 12:34:40 psytux kernel: [    1.684422] scsi1 : ahci
Feb 24 12:34:40 psytux kernel: [    1.684500] scsi2 : ahci
Feb 24 12:34:40 psytux kernel: [    1.684579] scsi3 : ahci
Feb 24 12:34:40 psytux kernel: [    1.684659] scsi4 : ahci
Feb 24 12:34:40 psytux kernel: [    1.684736] scsi5 : ahci
Feb 24 12:34:40 psytux kernel: [    1.684949] ata1: SATA max UDMA/133 abar m2048@0x98904000 port 0x98904100 irq 30
Feb 24 12:34:40 psytux kernel: [    1.684958] ata2: SATA max UDMA/133 abar m2048@0x98904000 port 0x98904180 irq 30
Feb 24 12:34:40 psytux kernel: [    1.684960] ata3: DUMMY
Feb 24 12:34:40 psytux kernel: [    1.684961] ata4: DUMMY
Feb 24 12:34:40 psytux kernel: [    1.684962] ata5: DUMMY
Feb 24 12:34:40 psytux kernel: [    1.684971] ata6: SATA max UDMA/133 abar m2048@0x98904000 port 0x98904380 irq 30
Feb 24 12:34:40 psytux kernel: [    1.685083]   alloc irq_desc for 20 on node -1
Feb 24 12:34:40 psytux kernel: [    1.685086]   alloc kstat_irqs on node -1
Feb 24 12:34:40 psytux kernel: [    1.685091] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 20 (level, low) -> IRQ 20
Feb 24 12:34:40 psytux kernel: [    1.685127] ehci_hcd 0000:00:1d.7: setting latency timer to 64
Feb 24 12:34:40 psytux kernel: [    1.685136] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Feb 24 12:34:40 psytux kernel: [    1.685149] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
Feb 24 12:34:40 psytux kernel: [    1.685201] ehci_hcd 0000:00:1d.7: debug port 1
Feb 24 12:34:40 psytux kernel: [    1.689096] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
Feb 24 12:34:40 psytux kernel: [    1.689114] ehci_hcd 0000:00:1d.7: irq 20, io mem 0x98904800
Feb 24 12:34:40 psytux kernel: [    1.704013] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Feb 24 12:34:40 psytux kernel: [    1.704032] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
Feb 24 12:34:40 psytux kernel: [    1.704034] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 24 12:34:40 psytux kernel: [    1.704036] usb usb2: Product: EHCI Host Controller
Feb 24 12:34:40 psytux kernel: [    1.704037] usb usb2: Manufacturer: Linux 2.6.32-trunk-amd64 ehci_hcd
Feb 24 12:34:40 psytux kernel: [    1.704039] usb usb2: SerialNumber: 0000:00:1d.7
Feb 24 12:34:40 psytux kernel: [    1.704104] usb usb2: configuration #1 chosen from 1 choice
Feb 24 12:34:40 psytux kernel: [    1.704132] hub 2-0:1.0: USB hub found
Feb 24 12:34:40 psytux kernel: [    1.704139] hub 2-0:1.0: 6 ports detected
Feb 24 12:34:40 psytux kernel: [    1.708522] firewire_ohci: Added fw-ohci device 0000:86:02.0, OHCI version 1.0
Feb 24 12:34:40 psytux kernel: [    1.709540] eth0: Tigon3 [partno(BCM95751) rev b002] (PCI Express) MAC address 00:22:64:67:56:30
Feb 24 12:34:40 psytux kernel: [    1.709543] eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1])
Feb 24 12:34:40 psytux kernel: [    1.709545] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
Feb 24 12:34:40 psytux kernel: [    1.709547] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
Feb 24 12:34:40 psytux kernel: [    1.753702] uhci_hcd: USB Universal Host Controller Interface driver
Feb 24 12:34:40 psytux kernel: [    1.753739] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Feb 24 12:34:40 psytux kernel: [    1.753760] uhci_hcd 0000:00:1a.0: setting latency timer to 64
Feb 24 12:34:40 psytux kernel: [    1.753769] uhci_hcd 0000:00:1a.0: UHCI Host Controller
Feb 24 12:34:40 psytux kernel: [    1.753778] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
Feb 24 12:34:40 psytux kernel: [    1.753821] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000060c0
Feb 24 12:34:40 psytux kernel: [    1.753858] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Feb 24 12:34:40 psytux kernel: [    1.753860] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 24 12:34:40 psytux kernel: [    1.753862] usb usb3: Product: UHCI Host Controller
Feb 24 12:34:40 psytux kernel: [    1.753863] usb usb3: Manufacturer: Linux 2.6.32-trunk-amd64 uhci_hcd
Feb 24 12:34:40 psytux kernel: [    1.753865] usb usb3: SerialNumber: 0000:00:1a.0
Feb 24 12:34:40 psytux kernel: [    1.753922] usb usb3: configuration #1 chosen from 1 choice
Feb 24 12:34:40 psytux kernel: [    1.753946] hub 3-0:1.0: USB hub found
Feb 24 12:34:40 psytux kernel: [    1.753951] hub 3-0:1.0: 2 ports detected
Feb 24 12:34:40 psytux kernel: [    1.754006] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Feb 24 12:34:40 psytux kernel: [    1.754018] uhci_hcd 0000:00:1a.1: setting latency timer to 64
Feb 24 12:34:40 psytux kernel: [    1.754027] uhci_hcd 0000:00:1a.1: UHCI Host Controller
Feb 24 12:34:40 psytux kernel: [    1.754040] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
Feb 24 12:34:40 psytux kernel: [    1.754098] uhci_hcd 0000:00:1a.1: irq 17, io base 0x000060a0
Feb 24 12:34:40 psytux kernel: [    1.754131] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
Feb 24 12:34:40 psytux kernel: [    1.754133] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 24 12:34:40 psytux kernel: [    1.754135] usb usb4: Product: UHCI Host Controller
Feb 24 12:34:40 psytux kernel: [    1.754137] usb usb4: Manufacturer: Linux 2.6.32-trunk-amd64 uhci_hcd
Feb 24 12:34:40 psytux kernel: [    1.754139] usb usb4: SerialNumber: 0000:00:1a.1
Feb 24 12:34:40 psytux kernel: [    1.754185] usb usb4: configuration #1 chosen from 1 choice
Feb 24 12:34:40 psytux kernel: [    1.754208] hub 4-0:1.0: USB hub found
Feb 24 12:34:40 psytux kernel: [    1.754214] hub 4-0:1.0: 2 ports detected
Feb 24 12:34:40 psytux kernel: [    1.754263] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Feb 24 12:34:40 psytux kernel: [    1.754281] uhci_hcd 0000:00:1a.2: setting latency timer to 64
Feb 24 12:34:40 psytux kernel: [    1.754290] uhci_hcd 0000:00:1a.2: UHCI Host Controller
Feb 24 12:34:40 psytux kernel: [    1.754296] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
Feb 24 12:34:40 psytux kernel: [    1.754344] uhci_hcd 0000:00:1a.2: irq 18, io base 0x00006080
Feb 24 12:34:40 psytux kernel: [    1.754380] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
Feb 24 12:34:40 psytux kernel: [    1.754382] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 24 12:34:40 psytux kernel: [    1.754384] usb usb5: Product: UHCI Host Controller
Feb 24 12:34:40 psytux kernel: [    1.754385] usb usb5: Manufacturer: Linux 2.6.32-trunk-amd64 uhci_hcd
Feb 24 12:34:40 psytux kernel: [    1.754387] usb usb5: SerialNumber: 0000:00:1a.2
Feb 24 12:34:40 psytux kernel: [    1.754434] usb usb5: configuration #1 chosen from 1 choice
Feb 24 12:34:40 psytux kernel: [    1.754459] hub 5-0:1.0: USB hub found
Feb 24 12:34:40 psytux kernel: [    1.754464] hub 5-0:1.0: 2 ports detected
Feb 24 12:34:40 psytux kernel: [    1.754516] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Feb 24 12:34:40 psytux kernel: [    1.754528] uhci_hcd 0000:00:1d.0: setting latency timer to 64
Feb 24 12:34:40 psytux kernel: [    1.754536] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Feb 24 12:34:40 psytux kernel: [    1.754542] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
Feb 24 12:34:40 psytux kernel: [    1.754578] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006060
Feb 24 12:34:40 psytux kernel: [    1.754625] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
Feb 24 12:34:40 psytux kernel: [    1.754627] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 24 12:34:40 psytux kernel: [    1.754628] usb usb6: Product: UHCI Host Controller
Feb 24 12:34:40 psytux kernel: [    1.754630] usb usb6: Manufacturer: Linux 2.6.32-trunk-amd64 uhci_hcd
Feb 24 12:34:40 psytux kernel: [    1.754632] usb usb6: SerialNumber: 0000:00:1d.0
Feb 24 12:34:40 psytux kernel: [    1.754711] usb usb6: configuration #1 chosen from 1 choice
Feb 24 12:34:40 psytux kernel: [    1.754757] hub 6-0:1.0: USB hub found
Feb 24 12:34:40 psytux kernel: [    1.754762] hub 6-0:1.0: 2 ports detected
Feb 24 12:34:40 psytux kernel: [    1.754807]   alloc irq_desc for 22 on node -1
Feb 24 12:34:40 psytux kernel: [    1.754809]   alloc kstat_irqs on node -1
Feb 24 12:34:40 psytux kernel: [    1.754814] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
Feb 24 12:34:40 psytux kernel: [    1.754820] uhci_hcd 0000:00:1d.1: setting latency timer to 64
Feb 24 12:34:40 psytux kernel: [    1.754823] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Feb 24 12:34:40 psytux kernel: [    1.754832] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
Feb 24 12:34:40 psytux kernel: [    1.754875] uhci_hcd 0000:00:1d.1: irq 22, io base 0x00006040
Feb 24 12:34:40 psytux kernel: [    1.754914] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
Feb 24 12:34:40 psytux kernel: [    1.754916] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 24 12:34:40 psytux kernel: [    1.754918] usb usb7: Product: UHCI Host Controller
Feb 24 12:34:40 psytux kernel: [    1.754920] usb usb7: Manufacturer: Linux 2.6.32-trunk-amd64 uhci_hcd
Feb 24 12:34:40 psytux kernel: [    1.754921] usb usb7: SerialNumber: 0000:00:1d.1
Feb 24 12:34:40 psytux kernel: [    1.754995] usb usb7: configuration #1 chosen from 1 choice
Feb 24 12:34:40 psytux kernel: [    1.755040] hub 7-0:1.0: USB hub found
Feb 24 12:34:40 psytux kernel: [    1.755046] hub 7-0:1.0: 2 ports detected
Feb 24 12:34:40 psytux kernel: [    1.755088] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Feb 24 12:34:40 psytux kernel: [    1.755094] uhci_hcd 0000:00:1d.2: setting latency timer to 64
Feb 24 12:34:40 psytux kernel: [    1.755097] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Feb 24 12:34:40 psytux kernel: [    1.755103] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
Feb 24 12:34:40 psytux kernel: [    1.755128] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006020
Feb 24 12:34:40 psytux kernel: [    1.755162] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
Feb 24 12:34:40 psytux kernel: [    1.755165] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 24 12:34:40 psytux kernel: [    1.755167] usb usb8: Product: UHCI Host Controller
Feb 24 12:34:40 psytux kernel: [    1.755168] usb usb8: Manufacturer: Linux 2.6.32-trunk-amd64 uhci_hcd
Feb 24 12:34:40 psytux kernel: [    1.755170] usb usb8: SerialNumber: 0000:00:1d.2
Feb 24 12:34:40 psytux kernel: [    1.755247] usb usb8: configuration #1 chosen from 1 choice
Feb 24 12:34:40 psytux kernel: [    1.755292] hub 8-0:1.0: USB hub found
Feb 24 12:34:40 psytux kernel: [    1.755298] hub 8-0:1.0: 2 ports detected
Feb 24 12:34:40 psytux kernel: [    2.012028] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Feb 24 12:34:40 psytux kernel: [    2.012629] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Feb 24 12:34:40 psytux kernel: [    2.012737] ata1.00: ATA-8: FUJITSU MHZ2250BH G2, 8909, max UDMA/100
Feb 24 12:34:40 psytux kernel: [    2.012739] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Feb 24 12:34:40 psytux kernel: [    2.013352] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Feb 24 12:34:40 psytux kernel: [    2.013482] ata1.00: configured for UDMA/100
Feb 24 12:34:40 psytux kernel: [    2.028097] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHZ2250B 8909 PQ: 0 ANSI: 5
Feb 24 12:34:40 psytux kernel: [    2.204010] usb 1-5: new high speed USB device using ehci_hcd and address 4
Feb 24 12:34:40 psytux kernel: [    2.208053] firewire_core: created device fw0: GUID 5566779911223355, S400
Feb 24 12:34:40 psytux kernel: [    2.374944] usb 1-5: New USB device found, idVendor=04f2, idProduct=b059
Feb 24 12:34:40 psytux kernel: [    2.374946] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
Feb 24 12:34:40 psytux kernel: [    2.374948] usb 1-5: Product: CKF7037
Feb 24 12:34:40 psytux kernel: [    2.374950] usb 1-5: Manufacturer: Chicony Electronics Co., Ltd.
Feb 24 12:34:40 psytux kernel: [    2.374952] usb 1-5: SerialNumber: SN0001
Feb 24 12:34:40 psytux kernel: [    2.375007] usb 1-5: configuration #1 chosen from 1 choice
Feb 24 12:34:40 psytux kernel: [    2.616008] usb 3-1: new full speed USB device using uhci_hcd and address 2
Feb 24 12:34:40 psytux kernel: [    2.752019] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Feb 24 12:34:40 psytux kernel: [    2.764891] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Feb 24 12:34:40 psytux kernel: [    2.764895] ata2.00: ATAPI: Optiarc DVD RW AD-7561S, AH03, max UDMA/100
Feb 24 12:34:40 psytux kernel: [    2.778665] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Feb 24 12:34:40 psytux kernel: [    2.778687] ata2.00: configured for UDMA/100
Feb 24 12:34:40 psytux kernel: [    2.788750] usb 3-1: New USB device found, idVendor=03f0, idProduct=171d
Feb 24 12:34:40 psytux kernel: [    2.788752] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Feb 24 12:34:40 psytux kernel: [    2.788754] usb 3-1: Product: HP Integrated Module
Feb 24 12:34:40 psytux kernel: [    2.788756] usb 3-1: Manufacturer: Broadcom Corp
Feb 24 12:34:40 psytux kernel: [    2.788804] usb 3-1: configuration #1 chosen from 1 choice
Feb 24 12:34:40 psytux kernel: [    2.793126] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7561S  AH03 PQ: 0 ANSI: 5
Feb 24 12:34:40 psytux kernel: [    3.028027] usb 4-1: new full speed USB device using uhci_hcd and address 2
Feb 24 12:34:40 psytux kernel: [    3.112024] ata6: SATA link down (SStatus 0 SControl 300)
Feb 24 12:34:40 psytux kernel: [    3.133927] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
Feb 24 12:34:40 psytux kernel: [    3.133966] sd 0:0:0:0: [sda] Write Protect is off
Feb 24 12:34:40 psytux kernel: [    3.133969] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Feb 24 12:34:40 psytux kernel: [    3.133988] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Feb 24 12:34:40 psytux kernel: [    3.134118]  sda: sda1 sda2
Feb 24 12:34:40 psytux kernel: [    3.164973] sd 0:0:0:0: [sda] Attached SCSI disk
Feb 24 12:34:40 psytux kernel: [    3.172816] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Feb 24 12:34:40 psytux kernel: [    3.172819] Uniform CD-ROM driver Revision: 3.20
Feb 24 12:34:40 psytux kernel: [    3.172893] sr 1:0:0:0: Attached scsi CD-ROM sr0
Feb 24 12:34:40 psytux kernel: [    3.175610] sd 0:0:0:0: Attached scsi generic sg0 type 0
Feb 24 12:34:40 psytux kernel: [    3.175675] sr 1:0:0:0: Attached scsi generic sg1 type 5
Feb 24 12:34:40 psytux kernel: [    3.204986] usb 4-1: New USB device found, idVendor=08ff, idProduct=2810
Feb 24 12:34:40 psytux kernel: [    3.204988] usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Feb 24 12:34:40 psytux kernel: [    3.204991] usb 4-1: Product: Fingerprint Sensor
Feb 24 12:34:40 psytux kernel: [    3.205052] usb 4-1: configuration #1 chosen from 1 choice
Feb 24 12:34:40 psytux kernel: [    3.379624] device-mapper: uevent: version 1.0.3
Feb 24 12:34:40 psytux kernel: [    3.379741] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
Feb 24 12:34:40 psytux kernel: [   12.306143] Intel AES-NI instructions are not detected.
Feb 24 12:34:40 psytux kernel: [   12.655785] PM: Starting manual resume from disk
Feb 24 12:34:40 psytux kernel: [   12.707792] kjournald starting.  Commit interval 5 seconds
Feb 24 12:34:40 psytux kernel: [   12.707796] EXT3-fs: mounted filesystem with ordered data mode.
Feb 24 12:34:40 psytux kernel: [   14.457441] udev: starting version 151
Feb 24 12:34:40 psytux kernel: [   14.968534] ACPI: AC Adapter [AC] (off-line)
Feb 24 12:34:40 psytux kernel: [   15.014615] ACPI: Battery Slot [BAT0] (battery present)
Feb 24 12:34:40 psytux kernel: [   15.014799] ACPI: Battery Slot [BAT1] (battery absent)
Feb 24 12:34:40 psytux kernel: [   15.165105] ACPI: SSDT 000000007b9c8c18 00275 (v01  PmRef  Cpu0Ist 00003000 INTL 20060912)
Feb 24 12:34:40 psytux kernel: [   15.165574] ACPI: SSDT 000000007b9c6618 0057B (v01  PmRef  Cpu0Cst 00003001 INTL 20060912)
Feb 24 12:34:40 psytux kernel: [   15.168809] Monitor-Mwait will be used to enter C-1 state
Feb 24 12:34:40 psytux kernel: [   15.168828] Monitor-Mwait will be used to enter C-2 state
Feb 24 12:34:40 psytux kernel: [   15.168844] Monitor-Mwait will be used to enter C-3 state
Feb 24 12:34:40 psytux kernel: [   15.168849] Marking TSC unstable due to TSC halts in idle
Feb 24 12:34:40 psytux kernel: [   15.168962] processor LNXCPU:00: registered as cooling_device6
Feb 24 12:34:40 psytux kernel: [   15.169427] ACPI: SSDT 000000007b9c7e18 001D7 (v01  PmRef    ApIst 00003000 INTL 20060912)
Feb 24 12:34:40 psytux kernel: [   15.169810] ACPI: SSDT 000000007b9c8f18 0008D (v01  PmRef    ApCst 00003000 INTL 20060912)
Feb 24 12:34:40 psytux kernel: [   15.171789] Switching to clocksource hpet
Feb 24 12:34:40 psytux kernel: [   15.172073] processor LNXCPU:01: registered as cooling_device7
Feb 24 12:34:40 psytux kernel: [   15.195000] ACPI: WMI: Mapper loaded
Feb 24 12:34:40 psytux kernel: [   15.327044] Bluetooth: Core ver 2.15
Feb 24 12:34:40 psytux kernel: [   15.327830] NET: Registered protocol family 31
Feb 24 12:34:40 psytux kernel: [   15.327832] Bluetooth: HCI device and connection manager initialized
Feb 24 12:34:40 psytux kernel: [   15.327834] Bluetooth: HCI socket layer initialized
Feb 24 12:34:40 psytux kernel: [   15.503863] cfg80211: Using static regulatory domain info
Feb 24 12:34:40 psytux kernel: [   15.503865] cfg80211: Regulatory domain: US
Feb 24 12:34:40 psytux kernel: [   15.503867] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Feb 24 12:34:40 psytux kernel: [   15.503870] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
Feb 24 12:34:40 psytux kernel: [   15.503872] 	(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Feb 24 12:34:40 psytux kernel: [   15.503874] 	(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Feb 24 12:34:40 psytux kernel: [   15.503876] 	(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Feb 24 12:34:40 psytux kernel: [   15.503879] 	(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Feb 24 12:34:40 psytux kernel: [   15.503881] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
Feb 24 12:34:40 psytux kernel: [   15.504898] cfg80211: Calling CRDA for country: US
Feb 24 12:34:40 psytux kernel: [   15.505868] tpm_inf_pnp 00:04: Found GTPM with ID IFX0102
Feb 24 12:34:40 psytux kernel: [   15.505929] tpm_inf_pnp 00:04: TPM found: config base 0xfe00, data base 0xfe80, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2)
Feb 24 12:34:40 psytux kernel: [   15.714273] parport_pc 00:0a: reported by Plug and Play ACPI
Feb 24 12:34:40 psytux kernel: [   15.714370] parport0: PC-style at 0x378 (0x778), irq 5 [PCSPP,TRISTATE]
Feb 24 12:34:40 psytux kernel: [   15.716623] lis3lv02d: hardware type NC6730b found.
Feb 24 12:34:40 psytux kernel: [   15.717437] lis3lv02d: 1-byte sensor found
Feb 24 12:34:40 psytux kernel: [   15.733014] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6
Feb 24 12:34:40 psytux kernel: [   15.733091] Registered led device: hp::hddprotect
Feb 24 12:34:40 psytux kernel: [   15.733108] lis3lv02d driver loaded.
Feb 24 12:34:40 psytux kernel: [   15.764571] Linux video capture interface: v2.00
Feb 24 12:34:40 psytux kernel: [   15.813802] Bluetooth: Generic Bluetooth USB driver ver 0.6
Feb 24 12:34:40 psytux kernel: [   15.813955] usbcore: registered new interface driver btusb
Feb 24 12:34:40 psytux kernel: [   15.934729] uvcvideo: Found UVC 1.00 device CKF7037 (04f2:b059)
Feb 24 12:34:40 psytux kernel: [   15.951176] input: CKF7037 as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5:1.0/input/input7
Feb 24 12:34:40 psytux kernel: [   15.951241] usbcore: registered new interface driver uvcvideo
Feb 24 12:34:40 psytux kernel: [   15.951243] USB Video Class driver (v0.1.0)
Feb 24 12:34:40 psytux kernel: [   16.109660] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
Feb 24 12:34:40 psytux kernel: [   16.109662] iwlagn: Copyright(c) 2003-2009 Intel Corporation
Feb 24 12:34:40 psytux kernel: [   16.109738] iwlagn 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Feb 24 12:34:40 psytux kernel: [   16.109746] iwlagn 0000:02:00.0: setting latency timer to 64
Feb 24 12:34:40 psytux kernel: [   16.109851] iwlagn 0000:02:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
Feb 24 12:34:40 psytux kernel: [   16.153469] iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
Feb 24 12:34:40 psytux kernel: [   16.153537]   alloc irq_desc for 31 on node -1
Feb 24 12:34:40 psytux kernel: [   16.153541]   alloc kstat_irqs on node -1
Feb 24 12:34:40 psytux kernel: [   16.153566] iwlagn 0000:02:00.0: irq 31 for MSI/MSI-X
Feb 24 12:34:40 psytux kernel: [   16.291498] phy0: Selected rate control algorithm 'iwl-agn-rs'
Feb 24 12:34:40 psytux kernel: [   16.395886] Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04711/0xa00000
Feb 24 12:34:40 psytux kernel: [   16.436966] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
Feb 24 12:34:40 psytux kernel: [   16.477790] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
Feb 24 12:34:40 psytux kernel: [   16.477819] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Feb 24 12:34:40 psytux kernel: [   16.477851] HDA Intel 0000:00:1b.0: setting latency timer to 64
Feb 24 12:34:40 psytux kernel: [   16.968890] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
Feb 24 12:34:40 psytux kernel: [   18.273917] EXT3 FS on dm-1, internal journal
Feb 24 12:34:40 psytux kernel: [   18.558852] loop: module loaded
Feb 24 12:34:40 psytux kernel: [   18.574417] input: HP WMI hotkeys as /devices/virtual/input/input10
Feb 24 12:34:40 psytux kernel: [   25.763159] kjournald starting.  Commit interval 5 seconds
Feb 24 12:34:40 psytux kernel: [   25.763547] EXT3 FS on sda1, internal journal
Feb 24 12:34:40 psytux kernel: [   25.763552] EXT3-fs: mounted filesystem with ordered data mode.
Feb 24 12:34:40 psytux kernel: [   25.867344] kjournald starting.  Commit interval 5 seconds
Feb 24 12:34:40 psytux kernel: [   25.868414] EXT3 FS on dm-3, internal journal
Feb 24 12:34:40 psytux kernel: [   25.868418] EXT3-fs: mounted filesystem with ordered data mode.
Feb 24 12:34:40 psytux kernel: [   25.905414] Adding 2097144k swap on /dev/mapper/psytux-swap_1.  Priority:-1 extents:1 across:2097144k 
Feb 24 12:34:40 psytux kernel: [   28.385212] fuse init (API version 7.13)
Feb 24 12:34:40 psytux kernel: [   28.706766] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input11
Feb 24 12:34:40 psytux kernel: [   29.272386] iwlagn 0000:02:00.0: firmware: requesting iwlwifi-5000-2.ucode
Feb 24 12:34:40 psytux kernel: [   29.420336] iwlagn 0000:02:00.0: loaded firmware version 8.24.2.12
Feb 24 12:34:40 psytux kernel: [   29.577988] Registered led device: iwl-phy0::radio
Feb 24 12:34:40 psytux kernel: [   29.578339] Registered led device: iwl-phy0::assoc
Feb 24 12:34:40 psytux kernel: [   29.578403] Registered led device: iwl-phy0::RX
Feb 24 12:34:40 psytux kernel: [   29.578446] Registered led device: iwl-phy0::TX
Feb 24 12:34:40 psytux kernel: [   29.617181] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Feb 24 12:34:40 psytux kernel: [   33.930047] wlan0: deauthenticating from 00:24:97:84:ce:33 by local choice (reason=3)
Feb 24 12:34:40 psytux kernel: [   33.930109] wlan0: direct probe to AP 00:24:97:84:ce:33 (try 1)
Feb 24 12:34:40 psytux kernel: [   33.953988] wlan0: direct probe responded
Feb 24 12:34:40 psytux kernel: [   33.953992] wlan0: authenticate with AP 00:24:97:84:ce:33 (try 1)
Feb 24 12:34:40 psytux kernel: [   33.957565] wlan0: authenticated
Feb 24 12:34:40 psytux kernel: [   33.957583] wlan0: associate with AP 00:24:97:84:ce:33 (try 1)
Feb 24 12:34:40 psytux kernel: [   33.962619] wlan0: RX AssocResp from 00:24:97:84:ce:33 (capab=0x421 status=0 aid=3)
Feb 24 12:34:40 psytux kernel: [   33.962625] wlan0: associated
Feb 24 12:34:40 psytux wpa_supplicant[1959]: Associated with 00:24:97:84:ce:33
Feb 24 12:34:40 psytux wpa_supplicant[1959]: CTRL-EVENT-CONNECTED - Connection to 00:24:97:84:ce:33 completed (auth) [id=2 id_str=Uni]
Feb 24 12:34:40 psytux kernel: [   33.965708] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Feb 24 12:34:41 psytux dhclient: Internet Systems Consortium DHCP Client V3.1.3
Feb 24 12:34:41 psytux dhclient: Copyright 2004-2009 Internet Systems Consortium.
Feb 24 12:34:41 psytux dhclient: All rights reserved.
Feb 24 12:34:41 psytux dhclient: For info, please visit https://www.isc.org/software/dhcp/
Feb 24 12:34:41 psytux dhclient: 
Feb 24 12:34:41 psytux acpid: starting up with netlink and the input layer
Feb 24 12:34:41 psytux acpid: skipping conf file /etc/acpi/events/.
Feb 24 12:34:41 psytux acpid: skipping conf file /etc/acpi/events/..
Feb 24 12:34:41 psytux dhclient: Listening on LPF/wlan0/00:21:6b:1d:35:14
Feb 24 12:34:41 psytux dhclient: Sending on   LPF/wlan0/00:21:6b:1d:35:14
Feb 24 12:34:41 psytux dhclient: Sending on   Socket/fallback
Feb 24 12:34:41 psytux dhclient: DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7
Feb 24 12:34:41 psytux dhclient: DHCPOFFER from 10.9.8.7
Feb 24 12:34:41 psytux dhclient: DHCPREQUEST on wlan0 to 255.255.255.255 port 67
Feb 24 12:34:41 psytux dhclient: DHCPACK from 10.9.8.7
Feb 24 12:34:42 psytux /usr/sbin/cron[2121]: (CRON) INFO (pidfile fd = 3)
Feb 24 12:34:42 psytux /usr/sbin/cron[2136]: (CRON) STARTUP (fork ok)
Feb 24 12:34:43 psytux /usr/sbin/cron[2136]: (CRON) INFO (Running @reboot jobs)
Generated via diffing the result after:
 cut -f 2 -d\]
--- syslog.cut	2010-02-24 12:49:36.000000000 +0100
+++ syslog.working.cut	2010-02-24 12:49:43.000000000 +0100
@@ -1,9 +1,8 @@
-Feb 24 12:34:40 psytux kernel: imklog 4.4.2, log source = /proc/kmsg started.
- (re)start
+Feb 24 12:41:29 psytux kernel: imklog 4.4.2, log source = /proc/kmsg started.
  Initializing cgroup subsys cpuset
  Initializing cgroup subsys cpu
- Linux version 2.6.32-trunk-amd64 (Debian 2.6.32-5) (ben@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sun Jan 10 22:40:40 UTC 2010
- Command line: BOOT_IMAGE=//vmlinuz-2.6.32-trunk-amd64 root=/dev/mapper/psytux-root ro video=i915 quiet
+ Linux version 2.6.30-2-amd64 (Debian 2.6.30-8squeeze1) (dannf@debian.org) (gcc version 4.3.4 (Debian 4.3.4-5) ) #1 SMP Mon Dec 7 05:21:45 UTC 2009
+ Command line: BOOT_IMAGE=//vmlinuz-2.6.30-2-amd64 root=/dev/mapper/psytux-root ro video=i915 quiet
  KERNEL supported cpus:
    Intel GenuineIntel
    AMD AuthenticAMD
@@ -32,7 +31,7 @@ Feb 24 12:34:40 psytux kernel: imklog 4.
   BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
   BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
  DMI 2.4 present.
- last_pfn = 0x7bb00 max_arch_pfn = 0x400000000
+ last_pfn = 0x7bb00 max_arch_pfn = 0x100000000
  MTRR default type: uncachable
  MTRR fixed ranges enabled:
    00000-9FFFF write-back
@@ -47,12 +46,11 @@ Feb 24 12:34:40 psytux kernel: imklog 4.
    5 disabled
    6 disabled
  x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- initial memory mapped : 0 - 20000000
  init_memory_mapping: 0000000000000000-000000007bb00000
   0000000000 - 007ba00000 page 2M
   007ba00000 - 007bb00000 page 4k
  kernel direct mapping tables up to 7bb00000 @ 8000-c000
- RAMDISK: 3764e000 - 37feff07
+ RAMDISK: 37707000 - 37fefdd2
  ACPI: RSDP 00000000000f68b0 00024 (v02 HPQOEM)
  ACPI: XSDT 000000007bafe120 0008C (v01 HPQOEM SLIC-MPC 0000000F      01000013)
  ACPI: FACP 000000007bafc000 000F4 (v03 HPQOEM 30DD     0000000F HP   00000001)
@@ -66,7 +64,7 @@ Feb 24 12:34:40 psytux kernel: imklog 4.
  ACPI: SSDT 000000007badc000 002DD (v01 HPQOEM SataAhci 00001000 INTL 20060912)
  ACPI: SLIC 000000007bada000 00176 (v01 HPQOEM SLIC-MPC 00000001 HP   00000001)
  ACPI: SSDT 000000007bad9000 00059 (v01 HPQOEM   HPQNLP 00000001 INTL 20060912)
- ACPI: DMAR 000000007bad8000 000F8 (v01               ? 00000001      00000000)
+ ACPI: DMAR 000000007bad8000 000F8 (v01                00000001      00000000)
  ACPI: SSDT 000000007bad7000 0066C (v01  PmRef    CpuPm 00003000 INTL 20060912)
  ACPI: SSDT 000000007bad6000 00288 (v01  PmRef  Cpu0Tst 00003000 INTL 20060912)
  ACPI: SSDT 000000007bad5000 00225 (v01  PmRef    ApTst 00003000 INTL 20060912)
@@ -79,12 +77,12 @@ Feb 24 12:34:40 psytux kernel: imklog 4.
  (7 early reservations) ==> bootmem [0000000000 - 007bb00000
    #0 [0000000000 - 0000001000
    #1 [0000006000 - 0000008000
-   #2 [0001000000 - 000165d9d4
-   #3 [003764e000 - 0037feff07
+   #2 [0000200000 - 00007d9b0c
+   #3 [0037707000 - 0037fefdd2
    #4 [000009fc00 - 0000100000
-   #5 [000165e000 - 000165e19c
+   #5 [00007da000 - 00007da19c
    #6 [0000008000 - 000000a000
-  [ffffea0000000000-ffffea0001bfffff
+  [ffffe20000000000-ffffe20001bfffff
  Zone PFN ranges:
    DMA      0x00000000 -> 0x00001000
    DMA32    0x00001000 -> 0x00100000
@@ -99,8 +97,8 @@ Feb 24 12:34:40 psytux kernel: imklog 4.
      0: 0x0007baff -> 0x0007bb00
  On node 0 totalpages: 505671
    DMA zone: 56 pages used for memmap
-   DMA zone: 101 pages reserved
-   DMA zone: 3842 pages, LIFO batch:0
+   DMA zone: 1598 pages reserved
+   DMA zone: 2345 pages, LIFO batch:0
    DMA32 zone: 6871 pages used for memmap
    DMA32 zone: 494801 pages, LIFO batch:31
  ACPI: PM-Timer IO Port: 0x408
@@ -133,33 +131,30 @@ Feb 24 12:34:40 psytux kernel: imklog 4.
  PM: Registered nosave memory: 000000007b9bf000 - 000000007b9cf000
  PM: Registered nosave memory: 000000007b9cf000 - 000000007bacf000
  PM: Registered nosave memory: 000000007bacf000 - 000000007baff000
- Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
- Booting paravirtualized kernel on bare hardware
+ Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
  NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
- PERCPU: Embedded 29 pages/cpu @ffff880001800000 s89880 r8192 d20712 u524288
- pcpu-alloc: s89880 r8192 d20712 u524288 alloc=1*2097152
- pcpu-alloc: [0
- Built 1 zonelists in Node order, mobility grouping on.  Total pages: 498643
+ PERCPU: Embedded 26 pages at ffff880001011000, static data 76256 bytes
+ Built 1 zonelists in Node order, mobility grouping on.  Total pages: 497146
  Policy zone: DMA32
- Kernel command line: BOOT_IMAGE=//vmlinuz-2.6.32-trunk-amd64 root=/dev/mapper/psytux-root ro video=i915 quiet
- PID hash table entries: 4096 (order: 3, 32768 bytes)
+ Kernel command line: BOOT_IMAGE=//vmlinuz-2.6.30-2-amd64 root=/dev/mapper/psytux-root ro video=i915 quiet
  Initializing CPU#0
- Checking aperture...
- No AGP bridge found
- Calgary: detecting Calgary via BIOS EBDA area
- Calgary: Unable to locate Rio Grande table in EBDA - bailing!
- Memory: 1976828k/2026496k available (2981k kernel code, 3812k absent, 45856k reserved, 1843k data, 576k init)
- SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- Hierarchical RCU implementation.
+ Experimental hierarchical RCU implementation.
+ Experimental hierarchical RCU init done.
  NR_IRQS:4352 nr_irqs:440
+ PID hash table entries: 4096 (order: 12, 32768 bytes)
  Extended CMOS year: 2000
+ Fast TSC calibration using PIT
+ Detected 2393.776 MHz processor.
  Console: colour dummy device 80x25
  console [tty0
+ Checking aperture...
+ No AGP bridge found
+ Calgary: detecting Calgary via BIOS EBDA area
+ Calgary: Unable to locate Rio Grande table in EBDA - bailing!
+ Memory: 1978284k/2026496k available (2785k kernel code, 3812k absent, 44400k reserved, 1399k data, 560k init)
  hpet clockevent registered
  HPET: 4 timers in total, 0 timers will be used for per-cpu timer
- Fast TSC calibration using PIT
- Detected 2394.323 MHz processor.
- Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.64 BogoMIPS (lpj=9577292)
+ Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.55 BogoMIPS (lpj=9575104)
  Security Framework initialized
  SELinux:  Disabled at boot.
  Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
@@ -175,51 +170,34 @@ Feb 24 12:34:40 psytux kernel: imklog 4.
  CPU 0/0x0 -> Node 0
  CPU: Physical Processor ID: 0
  CPU: Processor Core ID: 0
- mce: CPU supports 6 MCE banks
  CPU0: Thermal monitoring handled by SMI
  using mwait in idle threads.
- Performance Events: Core2 events, Intel PMU driver.
- ... version:                2
- ... bit width:              40
- ... generic registers:      2
- ... value mask:             000000ffffffffff
- ... max period:             000000007fffffff
- ... fixed-purpose events:   3
- ... event mask:             0000000700000003
- ACPI: Core revision 20090903
- DMAR: Host address width 36
- DMAR: DRHD base: 0x000000feb03000 flags: 0x0
- IOMMU feb03000: ver 1:0 cap c9008020e30260 ecap 1000
- DMAR: DRHD base: 0x000000feb01000 flags: 0x0
- IOMMU feb01000: ver 1:0 cap c0000020630260 ecap 1000
- DMAR: DRHD base: 0x000000feb02000 flags: 0x1
- IOMMU feb02000: ver 1:0 cap c9008020630260 ecap 1000
- DMAR: RMRR base: 0x8241311834011049 end: 0x20004a10e0d80a80
- DMAR: RMRR base: 0x0000007bc00000 end: 0x0000007fffffff
- DMAR: No ATSR found
+ ACPI: Core revision 20090320
  Setting APIC routing to flat
  ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  CPU0: Intel(R) Core(TM)2 Duo CPU     P8600  @ 2.40GHz stepping 06
  Booting processor 1 APIC 0x1 ip 0x6000
  Initializing CPU#1
- Calibrating delay using timer specific routine.. 4787.96 BogoMIPS (lpj=9575932)
+ Calibrating delay using timer specific routine.. 4787.96 BogoMIPS (lpj=9575939)
  CPU: L1 I cache: 32K, L1 D cache: 32K
  CPU: L2 cache: 3072K
  CPU 1/0x1 -> Node 0
  CPU: Physical Processor ID: 0
  CPU: Processor Core ID: 1
- CPU1: Thermal monitoring handled by SMI
+ CPU1: Thermal monitoring enabled (TM2)
+ x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
  CPU1: Intel(R) Core(TM)2 Duo CPU     P8600  @ 2.40GHz stepping 06
  checking TSC synchronization [CPU#0 -> CPU#1
  Brought up 2 CPUs
- Total of 2 processors activated (9576.61 BogoMIPS).
+ Total of 2 processors activated (9575.52 BogoMIPS).
  CPU0 attaching sched-domain:
   domain 0: span 0-1 level MC
    groups: 0 1
  CPU1 attaching sched-domain:
   domain 0: span 0-1 level MC
    groups: 1 0
- devtmpfs: initialized
+ net_namespace: 1936 bytes
+ Booting paravirtualized kernel on bare hardware
  regulator: core version 0.5
  NET: Registered protocol family 16
  ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
@@ -231,10 +209,12 @@ Feb 24 12:34:40 psytux kernel: imklog 4.
  bio: create slab <bio-0> at 0
  ACPI: EC: Look up EC in DSDT
  ACPI: BIOS _OSI(Linux) query ignored
+ ACPI: EC: non-query interrupt received, switching to interrupt mode
  ACPI: Interpreter enabled
  ACPI: (supports S0 S3 S4 S5)
  ACPI: Using IOAPIC for interrupt routing
  ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
+ ACPI: EC: driver started in interrupt mode
  ACPI: Power Resource [APPR
  ACPI: Power Resource [COMP
  ACPI: Power Resource [LPP
@@ -247,7 +227,7 @@ Feb 24 12:34:40 psytux kernel: imklog 4.
  ACPI: PCI Root Bridge [PCI0
  DMAR: Forcing write-buffer flush capability
  pci 0000:00:02.0: reg 10 64bit mmio: [0x98000000-0x983fffff
- pci 0000:00:02.0: reg 18 64bit mmio pref: [0x80000000-0x8fffffff
+ pci 0000:00:02.0: reg 18 64bit mmio: [0x80000000-0x8fffffff
  pci 0000:00:02.0: reg 20 io port: [0x60f0-0x60f7
  pci 0000:00:02.1: reg 10 64bit mmio: [0x98400000-0x984fffff
  pci 0000:00:1a.0: reg 20 io port: [0x60c0-0x60df
@@ -317,16 +297,22 @@ Feb 24 12:34:40 psytux kernel: imklog 4.
  ACPI: PCI Interrupt Link [LNKF
  ACPI: PCI Interrupt Link [LNKG
  ACPI: PCI Interrupt Link [LNKH
- vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
- vgaarb: loaded
+ usbcore: registered new interface driver usbfs
+ usbcore: registered new interface driver hub
+ usbcore: registered new device driver usb
  PCI: Using ACPI for IRQ routing
+ DMAR:Host address width 36
+ DMAR:DRHD (flags: 0x00000000)base: 0x00000000feb03000
+ DMAR:DRHD (flags: 0x00000000)base: 0x00000000feb01000
+ DMAR:DRHD (flags: 0x00000001)base: 0x00000000feb02000
+ DMAR:RMRR base: 0x0001201800001001 end: 0x08004010c0100a00
+ DMAR:RMRR base: 0x000000007bc00000 end: 0x000000007fffffff
  hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
  hpet0: 4 comparators, 64-bit 14.318180 MHz counter
- Switching to clocksource tsc
  pnp: PnP ACPI init
  ACPI: bus type pnp registered
-   alloc irq_desc for 23 on node 0
-   alloc kstat_irqs on node 0
+   alloc irq_desc for 23 on cpu 0 node 0
+   alloc kstat_irqs on cpu 0 node 0
  pnp: PnP ACPI: found 14 devices
  ACPI: ACPI bus type pnp unregistered
  system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
@@ -346,39 +332,39 @@ Feb 24 12:34:40 psytux kernel: imklog 4.
  system 00:07: ioport range 0x500-0x57f has been reserved
  system 00:07: ioport range 0xef80-0xef9f has been reserved
  pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
- pci 0000:00:1c.0:   IO window: 0x7000-0x7fff
+ pci 0000:00:1c.0:   IO window: disabled
  pci 0000:00:1c.0:   MEM window: 0x98800000-0x988fffff
- pci 0000:00:1c.0:   PREFETCH window: 0x00000098a00000-0x00000098bfffff
+ pci 0000:00:1c.0:   PREFETCH window: disabled
  pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
- pci 0000:00:1c.1:   IO window: 0x8000-0x8fff
+ pci 0000:00:1c.1:   IO window: disabled
  pci 0000:00:1c.1:   MEM window: 0x98700000-0x987fffff
- pci 0000:00:1c.1:   PREFETCH window: 0x00000098c00000-0x00000098dfffff
+ pci 0000:00:1c.1:   PREFETCH window: disabled
  pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
  pci 0000:00:1c.2:   IO window: 0x4000-0x5fff
  pci 0000:00:1c.2:   MEM window: 0x94000000-0x97ffffff
- pci 0000:00:1c.2:   PREFETCH window: 0x00000098e00000-0x00000098ffffff
+ pci 0000:00:1c.2:   PREFETCH window: disabled
  pci 0000:00:1c.4: PCI bridge, secondary bus 0000:44
  pci 0000:00:1c.4:   IO window: 0x2000-0x3fff
  pci 0000:00:1c.4:   MEM window: 0x90000000-0x93ffffff
- pci 0000:00:1c.4:   PREFETCH window: 0x00000099000000-0x000000991fffff
+ pci 0000:00:1c.4:   PREFETCH window: disabled
  pci 0000:00:1c.5: PCI bridge, secondary bus 0000:85
- pci 0000:00:1c.5:   IO window: 0x9000-0x9fff
+ pci 0000:00:1c.5:   IO window: disabled
  pci 0000:00:1c.5:   MEM window: 0x98600000-0x986fffff
- pci 0000:00:1c.5:   PREFETCH window: 0x00000099200000-0x000000993fffff
+ pci 0000:00:1c.5:   PREFETCH window: disabled
  pci 0000:00:1e.0: PCI bridge, secondary bus 0000:86
  pci 0000:00:1e.0:   IO window: disabled
  pci 0000:00:1e.0:   MEM window: 0x98500000-0x985fffff
  pci 0000:00:1e.0:   PREFETCH window: disabled
-   alloc irq_desc for 16 on node -1
-   alloc kstat_irqs on node -1
+   alloc irq_desc for 16 on cpu 0 node 0
+   alloc kstat_irqs on cpu 0 node 0
  pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  pci 0000:00:1c.0: setting latency timer to 64
-   alloc irq_desc for 17 on node -1
-   alloc kstat_irqs on node -1
+   alloc irq_desc for 17 on cpu 0 node 0
+   alloc kstat_irqs on cpu 0 node 0
  pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  pci 0000:00:1c.1: setting latency timer to 64
-   alloc irq_desc for 18 on node -1
-   alloc kstat_irqs on node -1
+   alloc irq_desc for 18 on cpu 0 node 0
+   alloc kstat_irqs on cpu 0 node 0
  pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  pci 0000:00:1c.2: setting latency timer to 64
  pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
@@ -388,21 +374,13 @@ Feb 24 12:34:40 psytux kernel: imklog 4.
  pci 0000:00:1e.0: setting latency timer to 64
  pci_bus 0000:00: resource 0 io:  [0x00-0xffff
  pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff
- pci_bus 0000:01: resource 0 io:  [0x7000-0x7fff
  pci_bus 0000:01: resource 1 mem: [0x98800000-0x988fffff
- pci_bus 0000:01: resource 2 pref mem [0x98a00000-0x98bfffff
- pci_bus 0000:02: resource 0 io:  [0x8000-0x8fff
  pci_bus 0000:02: resource 1 mem: [0x98700000-0x987fffff
- pci_bus 0000:02: resource 2 pref mem [0x98c00000-0x98dfffff
  pci_bus 0000:03: resource 0 io:  [0x4000-0x5fff
  pci_bus 0000:03: resource 1 mem: [0x94000000-0x97ffffff
- pci_bus 0000:03: resource 2 pref mem [0x98e00000-0x98ffffff
  pci_bus 0000:44: resource 0 io:  [0x2000-0x3fff
  pci_bus 0000:44: resource 1 mem: [0x90000000-0x93ffffff
- pci_bus 0000:44: resource 2 pref mem [0x99000000-0x991fffff
- pci_bus 0000:85: resource 0 io:  [0x9000-0x9fff
  pci_bus 0000:85: resource 1 mem: [0x98600000-0x986fffff
- pci_bus 0000:85: resource 2 pref mem [0x99200000-0x993fffff
  pci_bus 0000:86: resource 1 mem: [0x98500000-0x985fffff
  pci_bus 0000:86: resource 3 io:  [0x00-0xffff
  pci_bus 0000:86: resource 4 mem: [0x000000-0xffffffffffffffff
@@ -413,50 +391,54 @@ Feb 24 12:34:40 psytux kernel: imklog 4.
  TCP: Hash tables configured (established 262144 bind 65536)
  TCP reno registered
  NET: Registered protocol family 1
- pci 0000:00:02.0: Boot video device
- Unpacking initramfs...
- Freeing initrd memory: 9863k freed
+ Trying to unpack rootfs image as initramfs...
+ Switched to high resolution mode on CPU 1
+ Switched to high resolution mode on CPU 0
+ Freeing initrd memory: 9123k freed
  audit: initializing netlink socket (disabled)
- type=2000 audit(1267011247.543:1): initialized
+ type=2000 audit(1267011639.612:1): initialized
  HugeTLB registered 2 MB page size, pre-allocated 0 pages
  VFS: Disk quotas dquot_6.5.2
  Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- msgmni has been set to 3880
+ msgmni has been set to 3881
  alg: No test for stdrng (krng)
  Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  io scheduler noop registered
  io scheduler anticipatory registered
  io scheduler deadline registered
  io scheduler cfq registered (default)
-   alloc irq_desc for 24 on node -1
-   alloc kstat_irqs on node -1
- pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
- pcieport 0000:00:1c.0: setting latency timer to 64
-   alloc irq_desc for 25 on node -1
-   alloc kstat_irqs on node -1
- pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
- pcieport 0000:00:1c.1: setting latency timer to 64
-   alloc irq_desc for 26 on node -1
-   alloc kstat_irqs on node -1
- pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
- pcieport 0000:00:1c.2: setting latency timer to 64
-   alloc irq_desc for 27 on node -1
-   alloc kstat_irqs on node -1
- pcieport 0000:00:1c.4: irq 27 for MSI/MSI-X
- pcieport 0000:00:1c.4: setting latency timer to 64
-   alloc irq_desc for 28 on node -1
-   alloc kstat_irqs on node -1
- pcieport 0000:00:1c.5: irq 28 for MSI/MSI-X
- pcieport 0000:00:1c.5: setting latency timer to 64
- vesafb: framebuffer at 0x80000000, mapped to 0xffffc90010980000, using 5120k, total 5120k
+ pci 0000:00:02.0: Boot video device
+   alloc irq_desc for 24 on cpu 0 node 0
+   alloc kstat_irqs on cpu 0 node 0
+ pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
+ pcieport-driver 0000:00:1c.0: setting latency timer to 64
+   alloc irq_desc for 25 on cpu 0 node 0
+   alloc kstat_irqs on cpu 0 node 0
+ pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
+ pcieport-driver 0000:00:1c.1: setting latency timer to 64
+   alloc irq_desc for 26 on cpu 0 node 0
+   alloc kstat_irqs on cpu 0 node 0
+ pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
+ pcieport-driver 0000:00:1c.2: setting latency timer to 64
+   alloc irq_desc for 27 on cpu 0 node 0
+   alloc kstat_irqs on cpu 0 node 0
+ pcieport-driver 0000:00:1c.4: irq 27 for MSI/MSI-X
+ pcieport-driver 0000:00:1c.4: setting latency timer to 64
+   alloc irq_desc for 28 on cpu 0 node 0
+   alloc kstat_irqs on cpu 0 node 0
+ pcieport-driver 0000:00:1c.5: irq 28 for MSI/MSI-X
+ pcieport-driver 0000:00:1c.5: setting latency timer to 64
+ vesafb: framebuffer at 0x80000000, mapped to 0xffffc20010980000, using 5120k, total 5120k
  vesafb: mode is 1280x1024x32, linelength=5120, pages=0
  vesafb: scrolling: redraw
  vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
  Console: switching to colour frame buffer device 160x64
  fb0: VESA VGA frame buffer device
+ Linux agpgart interface v0.103
  Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
+ brd: module loaded
  input: Macintosh mouse button emulation as /devices/virtual/input/input0
  PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M
  i8042.c: Detected active multiplexing controller, rev 1.1.
@@ -466,7 +448,6 @@ Feb 24 12:34:40 psytux kernel: imklog 4.
  serio: i8042 AUX2 port at 0x60,0x64 irq 12
  serio: i8042 AUX3 port at 0x60,0x64 irq 12
  mice: PS/2 mouse device common for all mice
- Driver 'rtc_cmos' needs updating - please use bus_type methods
  rtc_cmos 00:08: RTC can wake from S4
  rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
  rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
@@ -479,36 +460,21 @@ Feb 24 12:34:40 psytux kernel: imklog 4.
  Mobile IPv6
  NET: Registered protocol family 17
  registered taskstats version 1
- rtc_cmos 00:08: setting system clock to 2010-02-24 11:34:07 UTC (1267011247)
- Freeing unused kernel memory: 576k freed
- Write protecting the kernel read-only data: 4096k
+ rtc_cmos 00:08: setting system clock to 2010-02-24 11:40:40 UTC (1267011640)
+ Freeing unused kernel memory: 560k freed
+ Write protecting the kernel read-only data: 3796k
  input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
- Linux agpgart interface v0.103
  agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset
  agpgart-intel 0000:00:00.0: detected 65532K stolen memory
  agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
- input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
- ACPI: Sleep Button [SLPB
- input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
- ACPI: Lid Switch [LID
- input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
- ACPI: Power Button [PWRF
  [drm
- i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- i915 0000:00:02.0: setting latency timer to 64
-   alloc irq_desc for 29 on node -1
-   alloc kstat_irqs on node -1
- i915 0000:00:02.0: irq 29 for MSI/MSI-X
- [drm
- [drm
- fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
- fb1: inteldrmfb frame buffer device
- registered panic notifier
- ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (000000005) is beyond end of object (20090903/exoparg2-445)
- ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.GFX0._DOD
- ACPI Exception: AE_AML_PACKAGE_LIMIT, Evaluating _DOD (20090903/video-1882)
- acpi device:05: registered as cooling_device0
- input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
+ pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
+ pci 0000:00:02.0: setting latency timer to 64
+   alloc irq_desc for 29 on cpu 0 node 0
+   alloc kstat_irqs on cpu 0 node 0
+ pci 0000:00:02.0: irq 29 for MSI/MSI-X
+ acpi device:07: registered as cooling_device0
+ input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/input/input2
  ACPI: Video Device [GFX0
  [drm
  fan PNP0C0B:00: registered as cooling_device1
@@ -531,12 +497,10 @@ Feb 24 12:34:40 psytux kernel: imklog 4.
  ACPI: Thermal Zone [BATZ
  thermal LNXTHERM:05: registered as thermal_zone4
  ACPI: Thermal Zone [FDTZ
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
  ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
-   alloc irq_desc for 19 on node -1
-   alloc kstat_irqs on node -1
+ SCSI subsystem initialized
+   alloc irq_desc for 19 on cpu 0 node 0
+   alloc kstat_irqs on cpu 0 node 0
  ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
  ehci_hcd 0000:00:1a.7: setting latency timer to 64
  ehci_hcd 0000:00:1a.7: EHCI Host Controller
@@ -544,33 +508,53 @@ Feb 24 12:34:40 psytux kernel: imklog 4.
  ehci_hcd 0000:00:1a.7: debug port 1
  ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
  ehci_hcd 0000:00:1a.7: irq 19, io mem 0x98904c00
- tg3.c:v3.102 (September 1, 2009)
+ tg3.c:v3.98 (February 25, 2009)
  tg3 0000:85:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  tg3 0000:85:00.0: setting latency timer to 64
- SCSI subsystem initialized
- firewire_ohci 0000:86:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- firewire_ohci 0000:86:02.0: setting latency timer to 64
- libata version 3.00 loaded.
+ tg3 0000:85:00.0: wake-up capability disabled by ACPI
+ tg3 0000:85:00.0: PME# disabled
  ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
  usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  usb usb1: Product: EHCI Host Controller
- usb usb1: Manufacturer: Linux 2.6.32-trunk-amd64 ehci_hcd
+ usb usb1: Manufacturer: Linux 2.6.30-2-amd64 ehci_hcd
  usb usb1: SerialNumber: 0000:00:1a.7
  usb usb1: configuration #1 chosen from 1 choice
  hub 1-0:1.0: USB hub found
  hub 1-0:1.0: 6 ports detected
+ firewire_ohci 0000:86:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
+ firewire_ohci 0000:86:02.0: setting latency timer to 64
+ libata version 3.00 loaded.
+   alloc irq_desc for 20 on cpu 0 node 0
+   alloc kstat_irqs on cpu 0 node 0
+ ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 20 (level, low) -> IRQ 20
+ ehci_hcd 0000:00:1d.7: setting latency timer to 64
+ ehci_hcd 0000:00:1d.7: EHCI Host Controller
+ ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
+ ehci_hcd 0000:00:1d.7: debug port 1
+ ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
+ ehci_hcd 0000:00:1d.7: irq 20, io mem 0x98904800
+ ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
+ usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
+ usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
+ usb usb2: Product: EHCI Host Controller
+ usb usb2: Manufacturer: Linux 2.6.30-2-amd64 ehci_hcd
+ usb usb2: SerialNumber: 0000:00:1d.7
+ usb usb2: configuration #1 chosen from 1 choice
+ hub 2-0:1.0: USB hub found
+ hub 2-0:1.0: 6 ports detected
  ahci 0000:00:1f.2: version 3.0
-   alloc irq_desc for 21 on node -1
-   alloc kstat_irqs on node -1
+   alloc irq_desc for 21 on cpu 0 node 0
+   alloc kstat_irqs on cpu 0 node 0
  ahci 0000:00:1f.2: PCI INT A -> GSI 21 (level, low) -> IRQ 21
-   alloc irq_desc for 30 on node -1
-   alloc kstat_irqs on node -1
+   alloc irq_desc for 30 on cpu 0 node 0
+   alloc kstat_irqs on cpu 0 node 0
  ahci 0000:00:1f.2: irq 30 for MSI/MSI-X
  ahci: SSS flag set, parallel bus scan disabled
  ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x23 impl SATA mode
- ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs 
+ ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems 
  ahci 0000:00:1f.2: setting latency timer to 64
+ uhci_hcd: USB Universal Host Controller Interface driver
  scsi0 : ahci
  scsi1 : ahci
  scsi2 : ahci
@@ -583,30 +567,6 @@ Feb 24 12:34:40 psytux kernel: imklog 4.
  ata4: DUMMY
  ata5: DUMMY
  ata6: SATA max UDMA/133 abar m2048@0x98904000 port 0x98904380 irq 30
-   alloc irq_desc for 20 on node -1
-   alloc kstat_irqs on node -1
- ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 20 (level, low) -> IRQ 20
- ehci_hcd 0000:00:1d.7: setting latency timer to 64
- ehci_hcd 0000:00:1d.7: EHCI Host Controller
- ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
- ehci_hcd 0000:00:1d.7: debug port 1
- ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
- ehci_hcd 0000:00:1d.7: irq 20, io mem 0x98904800
- ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
- usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb2: Product: EHCI Host Controller
- usb usb2: Manufacturer: Linux 2.6.32-trunk-amd64 ehci_hcd
- usb usb2: SerialNumber: 0000:00:1d.7
- usb usb2: configuration #1 chosen from 1 choice
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 6 ports detected
- firewire_ohci: Added fw-ohci device 0000:86:02.0, OHCI version 1.0
- eth0: Tigon3 [partno(BCM95751) rev b002
- eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1
- eth0: RXcsums[1
- eth0: dma_rwctrl[76180000
- uhci_hcd: USB Universal Host Controller Interface driver
  uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  uhci_hcd 0000:00:1a.0: setting latency timer to 64
  uhci_hcd 0000:00:1a.0: UHCI Host Controller
@@ -615,7 +575,7 @@ Feb 24 12:34:40 psytux kernel: imklog 4.
  usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  usb usb3: Product: UHCI Host Controller
- usb usb3: Manufacturer: Linux 2.6.32-trunk-amd64 uhci_hcd
+ usb usb3: Manufacturer: Linux 2.6.30-2-amd64 uhci_hcd
  usb usb3: SerialNumber: 0000:00:1a.0
  usb usb3: configuration #1 chosen from 1 choice
  hub 3-0:1.0: USB hub found
@@ -628,7 +588,7 @@ Feb 24 12:34:40 psytux kernel: imklog 4.
  usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
  usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  usb usb4: Product: UHCI Host Controller
- usb usb4: Manufacturer: Linux 2.6.32-trunk-amd64 uhci_hcd
+ usb usb4: Manufacturer: Linux 2.6.30-2-amd64 uhci_hcd
  usb usb4: SerialNumber: 0000:00:1a.1
  usb usb4: configuration #1 chosen from 1 choice
  hub 4-0:1.0: USB hub found
@@ -641,7 +601,7 @@ Feb 24 12:34:40 psytux kernel: imklog 4.
  usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
  usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  usb usb5: Product: UHCI Host Controller
- usb usb5: Manufacturer: Linux 2.6.32-trunk-amd64 uhci_hcd
+ usb usb5: Manufacturer: Linux 2.6.30-2-amd64 uhci_hcd
  usb usb5: SerialNumber: 0000:00:1a.2
  usb usb5: configuration #1 chosen from 1 choice
  hub 5-0:1.0: USB hub found
@@ -654,13 +614,13 @@ Feb 24 12:34:40 psytux kernel: imklog 4.
  usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
  usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  usb usb6: Product: UHCI Host Controller
- usb usb6: Manufacturer: Linux 2.6.32-trunk-amd64 uhci_hcd
+ usb usb6: Manufacturer: Linux 2.6.30-2-amd64 uhci_hcd
  usb usb6: SerialNumber: 0000:00:1d.0
  usb usb6: configuration #1 chosen from 1 choice
  hub 6-0:1.0: USB hub found
  hub 6-0:1.0: 2 ports detected
-   alloc irq_desc for 22 on node -1
-   alloc kstat_irqs on node -1
+   alloc irq_desc for 22 on cpu 0 node 0
+   alloc kstat_irqs on cpu 0 node 0
  uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
  uhci_hcd 0000:00:1d.1: setting latency timer to 64
  uhci_hcd 0000:00:1d.1: UHCI Host Controller
@@ -669,7 +629,7 @@ Feb 24 12:34:40 psytux kernel: imklog 4.
  usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
  usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  usb usb7: Product: UHCI Host Controller
- usb usb7: Manufacturer: Linux 2.6.32-trunk-amd64 uhci_hcd
+ usb usb7: Manufacturer: Linux 2.6.30-2-amd64 uhci_hcd
  usb usb7: SerialNumber: 0000:00:1d.1
  usb usb7: configuration #1 chosen from 1 choice
  hub 7-0:1.0: USB hub found
@@ -682,16 +642,21 @@ Feb 24 12:34:40 psytux kernel: imklog 4.
  usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
  usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  usb usb8: Product: UHCI Host Controller
- usb usb8: Manufacturer: Linux 2.6.32-trunk-amd64 uhci_hcd
+ usb usb8: Manufacturer: Linux 2.6.30-2-amd64 uhci_hcd
  usb usb8: SerialNumber: 0000:00:1d.2
  usb usb8: configuration #1 chosen from 1 choice
  hub 8-0:1.0: USB hub found
  hub 8-0:1.0: 2 ports detected
+ eth0: Tigon3 [partno(BCM95751) rev b002
+ eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1
+ eth0: RXcsums[1
+ eth0: dma_rwctrl[76180000
+ firewire_ohci: Added fw-ohci device 0000:86:02.0, OHCI version 1.0
  ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
+ ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
  ata1.00: ATA-8: FUJITSU MHZ2250BH G2, 8909, max UDMA/100
- ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
+ ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
+ ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
  ata1.00: configured for UDMA/100
  scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHZ2250B 8909 PQ: 0 ANSI: 5
  usb 1-5: new high speed USB device using ehci_hcd and address 4
@@ -704,24 +669,26 @@ Feb 24 12:34:40 psytux kernel: imklog 4.
  usb 1-5: configuration #1 chosen from 1 choice
  usb 3-1: new full speed USB device using uhci_hcd and address 2
  ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
+ ata2.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
  ata2.00: ATAPI: Optiarc DVD RW AD-7561S, AH03, max UDMA/100
- ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
+ ata2.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
  ata2.00: configured for UDMA/100
+ scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7561S  AH03 PQ: 0 ANSI: 5
  usb 3-1: New USB device found, idVendor=03f0, idProduct=171d
  usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  usb 3-1: Product: HP Integrated Module
  usb 3-1: Manufacturer: Broadcom Corp
  usb 3-1: configuration #1 chosen from 1 choice
- scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7561S  AH03 PQ: 0 ANSI: 5
  usb 4-1: new full speed USB device using uhci_hcd and address 2
  ata6: SATA link down (SStatus 0 SControl 300)
+ Driver 'sd' needs updating - please use bus_type methods
  sd 0:0:0:0: [sda
  sd 0:0:0:0: [sda
  sd 0:0:0:0: [sda
  sd 0:0:0:0: [sda
   sda: sda1 sda2
  sd 0:0:0:0: [sda
+ Driver 'sr' needs updating - please use bus_type methods
  sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
  Uniform CD-ROM driver Revision: 3.20
  sr 1:0:0:0: Attached scsi CD-ROM sr0
@@ -732,26 +699,37 @@ Feb 24 12:34:40 psytux kernel: imklog 4.
  usb 4-1: Product: Fingerprint Sensor
  usb 4-1: configuration #1 chosen from 1 choice
  device-mapper: uevent: version 1.0.3
- device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
+ device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
  Intel AES-NI instructions are not detected.
  PM: Starting manual resume from disk
  kjournald starting.  Commit interval 5 seconds
  EXT3-fs: mounted filesystem with ordered data mode.
  udev: starting version 151
  ACPI: AC Adapter [AC
- ACPI: Battery Slot [BAT0
- ACPI: Battery Slot [BAT1
  ACPI: SSDT 000000007b9c8c18 00275 (v01  PmRef  Cpu0Ist 00003000 INTL 20060912)
  ACPI: SSDT 000000007b9c6618 0057B (v01  PmRef  Cpu0Cst 00003001 INTL 20060912)
+ ACPI Warning (processor_throttling-0844): Invalid throttling state, reset [20090320
  Monitor-Mwait will be used to enter C-1 state
  Monitor-Mwait will be used to enter C-2 state
  Monitor-Mwait will be used to enter C-3 state
  Marking TSC unstable due to TSC halts in idle
- processor LNXCPU:00: registered as cooling_device6
+ ACPI: CPU0 (power states: C1[C1
+ processor ACPI_CPU:00: registered as cooling_device6
+ ACPI: Processor [CPU0
+ input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
+ ACPI: Power Button [PWRF
  ACPI: SSDT 000000007b9c7e18 001D7 (v01  PmRef    ApIst 00003000 INTL 20060912)
  ACPI: SSDT 000000007b9c8f18 0008D (v01  PmRef    ApCst 00003000 INTL 20060912)
- Switching to clocksource hpet
- processor LNXCPU:01: registered as cooling_device7
+ ACPI Warning (processor_throttling-0844): Invalid throttling state, reset [20090320
+ ACPI: CPU1 (power states: C1[C1
+ processor ACPI_CPU:01: registered as cooling_device7
+ ACPI: Processor [CPU1
+ ACPI: Battery Slot [BAT0
+ input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
+ ACPI: Sleep Button [SLPB
+ ACPI: Battery Slot [BAT1
+ input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
+ ACPI: Lid Switch [LID
  ACPI: WMI: Mapper loaded
  Bluetooth: Core ver 2.15
  NET: Registered protocol family 31
@@ -767,38 +745,41 @@ Feb 24 12:34:40 psytux kernel: imklog 4.
  	(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  	(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
  cfg80211: Calling CRDA for country: US
- tpm_inf_pnp 00:04: Found GTPM with ID IFX0102
- tpm_inf_pnp 00:04: TPM found: config base 0xfe00, data base 0xfe80, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2)
  parport_pc 00:0a: reported by Plug and Play ACPI
  parport0: PC-style at 0x378 (0x778), irq 5 [PCSPP,TRISTATE
- lis3lv02d: hardware type NC6730b found.
+ tpm_inf_pnp 00:04: Found GTPM with ID IFX0102
+ tpm_inf_pnp 00:04: TPM found: config base 0xfe00, data base 0xfe80, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2)
+ Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04711/0xa00000
+ lis3lv02d: hardware type NC673x found.
+ Bluetooth: Generic Bluetooth USB driver ver 0.5
+ usbcore: registered new interface driver btusb
  lis3lv02d: 1-byte sensor found
  input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6
+ lis3_init_device: irq 23
+ lis3: registering device
  Registered led device: hp::hddprotect
  lis3lv02d driver loaded.
+ input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
  Linux video capture interface: v2.00
- Bluetooth: Generic Bluetooth USB driver ver 0.6
- usbcore: registered new interface driver btusb
  uvcvideo: Found UVC 1.00 device CKF7037 (04f2:b059)
- input: CKF7037 as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5:1.0/input/input7
+ input: CKF7037 as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5:1.0/input/input8
  usbcore: registered new interface driver uvcvideo
  USB Video Class driver (v0.1.0)
+ HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
+ HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
+ HDA Intel 0000:00:1b.0: setting latency timer to 64
  iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
  iwlagn: Copyright(c) 2003-2009 Intel Corporation
  iwlagn 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  iwlagn 0000:02:00.0: setting latency timer to 64
  iwlagn 0000:02:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
  iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
-   alloc irq_desc for 31 on node -1
-   alloc kstat_irqs on node -1
+   alloc irq_desc for 31 on cpu 0 node 0
+   alloc kstat_irqs on cpu 0 node 0
  iwlagn 0000:02:00.0: irq 31 for MSI/MSI-X
  phy0: Selected rate control algorithm 'iwl-agn-rs'
- Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04711/0xa00000
- input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
- HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
- HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- HDA Intel 0000:00:1b.0: setting latency timer to 64
  input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
+ hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x011f0900
  EXT3 FS on dm-1, internal journal
  loop: module loaded
  input: HP WMI hotkeys as /devices/virtual/input/input10
@@ -809,41 +790,29 @@ Feb 24 12:34:40 psytux kernel: imklog 4.
  EXT3 FS on dm-3, internal journal
  EXT3-fs: mounted filesystem with ordered data mode.
  Adding 2097144k swap on /dev/mapper/psytux-swap_1.  Priority:-1 extents:1 across:2097144k 
- fuse init (API version 7.13)
- input: ACPI Virtual Keyboard Device as /devices/virtual/input/input11
+ fuse init (API version 7.11)
  iwlagn 0000:02:00.0: firmware: requesting iwlwifi-5000-2.ucode
  iwlagn 0000:02:00.0: loaded firmware version 8.24.2.12
+ input: ACPI Virtual Keyboard Device as /devices/virtual/input/input11
  Registered led device: iwl-phy0::radio
  Registered led device: iwl-phy0::assoc
  Registered led device: iwl-phy0::RX
  Registered led device: iwl-phy0::TX
  ADDRCONF(NETDEV_UP): wlan0: link is not ready
- wlan0: deauthenticating from 00:24:97:84:ce:33 by local choice (reason=3)
- wlan0: direct probe to AP 00:24:97:84:ce:33 (try 1)
- wlan0: direct probe responded
- wlan0: authenticate with AP 00:24:97:84:ce:33 (try 1)
+ wlan0: authenticate with AP 00:24:97:84:ce:33
  wlan0: authenticated
- wlan0: associate with AP 00:24:97:84:ce:33 (try 1)
- wlan0: RX AssocResp from 00:24:97:84:ce:33 (capab=0x421 status=0 aid=3)
+ wlan0: associate with AP 00:24:97:84:ce:33
+ wlan0: RX AssocResp from 00:24:97:84:ce:33 (capab=0x421 status=0 aid=4)
  wlan0: associated
-: Associated with 00:24:97:84:ce:33
-: CTRL-EVENT-CONNECTED - Connection to 00:24:97:84:ce:33 completed (auth) [id=2 id_str=Uni
  ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
-Feb 24 12:34:41 psytux dhclient: Internet Systems Consortium DHCP Client V3.1.3
-Feb 24 12:34:41 psytux dhclient: Copyright 2004-2009 Internet Systems Consortium.
-Feb 24 12:34:41 psytux dhclient: All rights reserved.
-Feb 24 12:34:41 psytux dhclient: For info, please visit https://www.isc.org/software/dhcp/
-Feb 24 12:34:41 psytux dhclient: 
-Feb 24 12:34:41 psytux acpid: starting up with netlink and the input layer
-Feb 24 12:34:41 psytux acpid: skipping conf file /etc/acpi/events/.
-Feb 24 12:34:41 psytux acpid: skipping conf file /etc/acpi/events/..
-Feb 24 12:34:41 psytux dhclient: Listening on LPF/wlan0/00:21:6b:1d:35:14
-Feb 24 12:34:41 psytux dhclient: Sending on   LPF/wlan0/00:21:6b:1d:35:14
-Feb 24 12:34:41 psytux dhclient: Sending on   Socket/fallback
-Feb 24 12:34:41 psytux dhclient: DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7
-Feb 24 12:34:41 psytux dhclient: DHCPOFFER from 10.9.8.7
-Feb 24 12:34:41 psytux dhclient: DHCPREQUEST on wlan0 to 255.255.255.255 port 67
-Feb 24 12:34:41 psytux dhclient: DHCPACK from 10.9.8.7
+ (re)start
+Feb 24 12:41:30 psytux acpid: starting up with netlink and the input layer
+Feb 24 12:41:30 psytux acpid: skipping conf file /etc/acpi/events/.
+Feb 24 12:41:30 psytux acpid: skipping conf file /etc/acpi/events/..
+Feb 24 12:41:31 psytux dhclient: DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7
 : (CRON) INFO (pidfile fd = 3)
+Feb 24 12:41:31 psytux dhclient: DHCPOFFER from 10.9.8.7
+Feb 24 12:41:31 psytux dhclient: DHCPREQUEST on wlan0 to 255.255.255.255 port 67
+Feb 24 12:41:31 psytux dhclient: DHCPACK from 10.9.8.7
 : (CRON) STARTUP (fork ok)
 : (CRON) INFO (Running @reboot jobs)
Feb 24 12:41:29 psytux kernel: imklog 4.4.2, log source = /proc/kmsg started.
Feb 24 12:41:29 psytux kernel: [    0.000000] Initializing cgroup subsys cpuset
Feb 24 12:41:29 psytux kernel: [    0.000000] Initializing cgroup subsys cpu
Feb 24 12:41:29 psytux kernel: [    0.000000] Linux version 2.6.30-2-amd64 (Debian 2.6.30-8squeeze1) (dannf@debian.org) (gcc version 4.3.4 (Debian 4.3.4-5) ) #1 SMP Mon Dec 7 05:21:45 UTC 2009
Feb 24 12:41:29 psytux kernel: [    0.000000] Command line: BOOT_IMAGE=//vmlinuz-2.6.30-2-amd64 root=/dev/mapper/psytux-root ro video=i915 quiet
Feb 24 12:41:29 psytux kernel: [    0.000000] KERNEL supported cpus:
Feb 24 12:41:29 psytux kernel: [    0.000000]   Intel GenuineIntel
Feb 24 12:41:29 psytux kernel: [    0.000000]   AMD AuthenticAMD
Feb 24 12:41:29 psytux kernel: [    0.000000]   Centaur CentaurHauls
Feb 24 12:41:29 psytux kernel: [    0.000000] BIOS-provided physical RAM map:
Feb 24 12:41:29 psytux kernel: [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Feb 24 12:41:29 psytux kernel: [    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Feb 24 12:41:29 psytux kernel: [    0.000000]  BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved)
Feb 24 12:41:29 psytux kernel: [    0.000000]  BIOS-e820: 0000000000100000 - 0000000077130000 (usable)
Feb 24 12:41:29 psytux kernel: [    0.000000]  BIOS-e820: 0000000077130000 - 0000000077140000 (ACPI NVS)
Feb 24 12:41:29 psytux kernel: [    0.000000]  BIOS-e820: 0000000077140000 - 000000007b4e0000 (usable)
Feb 24 12:41:29 psytux kernel: [    0.000000]  BIOS-e820: 000000007b4e0000 - 000000007b6e0000 (ACPI NVS)
Feb 24 12:41:29 psytux kernel: [    0.000000]  BIOS-e820: 000000007b6e0000 - 000000007b993000 (usable)
Feb 24 12:41:29 psytux kernel: [    0.000000]  BIOS-e820: 000000007b993000 - 000000007b99b000 (reserved)
Feb 24 12:41:29 psytux kernel: [    0.000000]  BIOS-e820: 000000007b99b000 - 000000007b9bf000 (usable)
Feb 24 12:41:29 psytux kernel: [    0.000000]  BIOS-e820: 000000007b9bf000 - 000000007b9cf000 (reserved)
Feb 24 12:41:29 psytux kernel: [    0.000000]  BIOS-e820: 000000007b9cf000 - 000000007bacf000 (ACPI NVS)
Feb 24 12:41:29 psytux kernel: [    0.000000]  BIOS-e820: 000000007bacf000 - 000000007baff000 (ACPI data)
Feb 24 12:41:29 psytux kernel: [    0.000000]  BIOS-e820: 000000007baff000 - 000000007bb00000 (usable)
Feb 24 12:41:29 psytux kernel: [    0.000000]  BIOS-e820: 000000007bb00000 - 0000000080000000 (reserved)
Feb 24 12:41:29 psytux kernel: [    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Feb 24 12:41:29 psytux kernel: [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Feb 24 12:41:29 psytux kernel: [    0.000000]  BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
Feb 24 12:41:29 psytux kernel: [    0.000000]  BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
Feb 24 12:41:29 psytux kernel: [    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
Feb 24 12:41:29 psytux kernel: [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Feb 24 12:41:29 psytux kernel: [    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
Feb 24 12:41:29 psytux kernel: [    0.000000] DMI 2.4 present.
Feb 24 12:41:29 psytux kernel: [    0.000000] last_pfn = 0x7bb00 max_arch_pfn = 0x100000000
Feb 24 12:41:29 psytux kernel: [    0.000000] MTRR default type: uncachable
Feb 24 12:41:29 psytux kernel: [    0.000000] MTRR fixed ranges enabled:
Feb 24 12:41:29 psytux kernel: [    0.000000]   00000-9FFFF write-back
Feb 24 12:41:29 psytux kernel: [    0.000000]   A0000-BFFFF uncachable
Feb 24 12:41:29 psytux kernel: [    0.000000]   C0000-FFFFF write-protect
Feb 24 12:41:29 psytux kernel: [    0.000000] MTRR variable ranges enabled:
Feb 24 12:41:29 psytux kernel: [    0.000000]   0 base 0FFE00000 mask FFFE00000 write-protect
Feb 24 12:41:29 psytux kernel: [    0.000000]   1 base 07BB00000 mask FFFF00000 uncachable
Feb 24 12:41:29 psytux kernel: [    0.000000]   2 base 000000000 mask F80000000 write-back
Feb 24 12:41:29 psytux kernel: [    0.000000]   3 base 077130000 mask FFFFF0000 uncachable
Feb 24 12:41:29 psytux kernel: [    0.000000]   4 disabled
Feb 24 12:41:29 psytux kernel: [    0.000000]   5 disabled
Feb 24 12:41:29 psytux kernel: [    0.000000]   6 disabled
Feb 24 12:41:29 psytux kernel: [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Feb 24 12:41:29 psytux kernel: [    0.000000] init_memory_mapping: 0000000000000000-000000007bb00000
Feb 24 12:41:29 psytux kernel: [    0.000000]  0000000000 - 007ba00000 page 2M
Feb 24 12:41:29 psytux kernel: [    0.000000]  007ba00000 - 007bb00000 page 4k
Feb 24 12:41:29 psytux kernel: [    0.000000] kernel direct mapping tables up to 7bb00000 @ 8000-c000
Feb 24 12:41:29 psytux kernel: [    0.000000] RAMDISK: 37707000 - 37fefdd2
Feb 24 12:41:29 psytux kernel: [    0.000000] ACPI: RSDP 00000000000f68b0 00024 (v02 HPQOEM)
Feb 24 12:41:29 psytux kernel: [    0.000000] ACPI: XSDT 000000007bafe120 0008C (v01 HPQOEM SLIC-MPC 0000000F      01000013)
Feb 24 12:41:29 psytux kernel: [    0.000000] ACPI: FACP 000000007bafc000 000F4 (v03 HPQOEM 30DD     0000000F HP   00000001)
Feb 24 12:41:29 psytux kernel: [    0.000000] ACPI: DSDT 000000007badf000 1780D (v01 HPQOEM 30DD     00000001 INTL 20060912)
Feb 24 12:41:29 psytux kernel: [    0.000000] ACPI: FACS 000000007ba9d000 00040
Feb 24 12:41:29 psytux kernel: [    0.000000] ACPI: HPET 000000007bafb000 00038 (v01 HPQOEM 30DD     00000001 HP   00000001)
Feb 24 12:41:29 psytux kernel: [    0.000000] ACPI: APIC 000000007bafa000 00084 (v01 HPQOEM 30DD     00000001 HP   00000001)
Feb 24 12:41:29 psytux kernel: [    0.000000] ACPI: MCFG 000000007baf9000 0003C (v01 HPQOEM 30DD     00000001 HP   00000001)
Feb 24 12:41:29 psytux kernel: [    0.000000] ACPI: ASF! 000000007baf8000 000A0 (v32 HPQOEM 30DD     00000001 HP   00000001)
Feb 24 12:41:29 psytux kernel: [    0.000000] ACPI: TCPA 000000007baf7000 00032 (v02 HPQOEM 30DD     00000000 HP   00000001)
Feb 24 12:41:29 psytux kernel: [    0.000000] ACPI: SSDT 000000007badc000 002DD (v01 HPQOEM SataAhci 00001000 INTL 20060912)
Feb 24 12:41:29 psytux kernel: [    0.000000] ACPI: SLIC 000000007bada000 00176 (v01 HPQOEM SLIC-MPC 00000001 HP   00000001)
Feb 24 12:41:29 psytux kernel: [    0.000000] ACPI: SSDT 000000007bad9000 00059 (v01 HPQOEM   HPQNLP 00000001 INTL 20060912)
Feb 24 12:41:29 psytux kernel: [    0.000000] ACPI: DMAR 000000007bad8000 000F8 (v01                00000001      00000000)
Feb 24 12:41:29 psytux kernel: [    0.000000] ACPI: SSDT 000000007bad7000 0066C (v01  PmRef    CpuPm 00003000 INTL 20060912)
Feb 24 12:41:29 psytux kernel: [    0.000000] ACPI: SSDT 000000007bad6000 00288 (v01  PmRef  Cpu0Tst 00003000 INTL 20060912)
Feb 24 12:41:29 psytux kernel: [    0.000000] ACPI: SSDT 000000007bad5000 00225 (v01  PmRef    ApTst 00003000 INTL 20060912)
Feb 24 12:41:29 psytux kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Feb 24 12:41:29 psytux kernel: [    0.000000] No NUMA configuration found
Feb 24 12:41:29 psytux kernel: [    0.000000] Faking a node at 0000000000000000-000000007bb00000
Feb 24 12:41:29 psytux kernel: [    0.000000] Bootmem setup node 0 0000000000000000-000000007bb00000
Feb 24 12:41:29 psytux kernel: [    0.000000]   NODE_DATA [000000000000a000 - 0000000000011fff]
Feb 24 12:41:29 psytux kernel: [    0.000000]   bootmap [0000000000012000 -  000000000002175f] pages 10
Feb 24 12:41:29 psytux kernel: [    0.000000] (7 early reservations) ==> bootmem [0000000000 - 007bb00000]
Feb 24 12:41:29 psytux kernel: [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
Feb 24 12:41:29 psytux kernel: [    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
Feb 24 12:41:29 psytux kernel: [    0.000000]   #2 [0000200000 - 00007d9b0c]    TEXT DATA BSS ==> [0000200000 - 00007d9b0c]
Feb 24 12:41:29 psytux kernel: [    0.000000]   #3 [0037707000 - 0037fefdd2]          RAMDISK ==> [0037707000 - 0037fefdd2]
Feb 24 12:41:29 psytux kernel: [    0.000000]   #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
Feb 24 12:41:29 psytux kernel: [    0.000000]   #5 [00007da000 - 00007da19c]              BRK ==> [00007da000 - 00007da19c]
Feb 24 12:41:29 psytux kernel: [    0.000000]   #6 [0000008000 - 000000a000]          PGTABLE ==> [0000008000 - 000000a000]
Feb 24 12:41:29 psytux kernel: [    0.000000]  [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0
Feb 24 12:41:29 psytux kernel: [    0.000000] Zone PFN ranges:
Feb 24 12:41:29 psytux kernel: [    0.000000]   DMA      0x00000000 -> 0x00001000
Feb 24 12:41:29 psytux kernel: [    0.000000]   DMA32    0x00001000 -> 0x00100000
Feb 24 12:41:29 psytux kernel: [    0.000000]   Normal   0x00100000 -> 0x00100000
Feb 24 12:41:29 psytux kernel: [    0.000000] Movable zone start PFN for each node
Feb 24 12:41:29 psytux kernel: [    0.000000] early_node_map[6] active PFN ranges
Feb 24 12:41:29 psytux kernel: [    0.000000]     0: 0x00000000 -> 0x0000009f
Feb 24 12:41:29 psytux kernel: [    0.000000]     0: 0x00000100 -> 0x00077130
Feb 24 12:41:29 psytux kernel: [    0.000000]     0: 0x00077140 -> 0x0007b4e0
Feb 24 12:41:29 psytux kernel: [    0.000000]     0: 0x0007b6e0 -> 0x0007b993
Feb 24 12:41:29 psytux kernel: [    0.000000]     0: 0x0007b99b -> 0x0007b9bf
Feb 24 12:41:29 psytux kernel: [    0.000000]     0: 0x0007baff -> 0x0007bb00
Feb 24 12:41:29 psytux kernel: [    0.000000] On node 0 totalpages: 505671
Feb 24 12:41:29 psytux kernel: [    0.000000]   DMA zone: 56 pages used for memmap
Feb 24 12:41:29 psytux kernel: [    0.000000]   DMA zone: 1598 pages reserved
Feb 24 12:41:29 psytux kernel: [    0.000000]   DMA zone: 2345 pages, LIFO batch:0
Feb 24 12:41:29 psytux kernel: [    0.000000]   DMA32 zone: 6871 pages used for memmap
Feb 24 12:41:29 psytux kernel: [    0.000000]   DMA32 zone: 494801 pages, LIFO batch:31
Feb 24 12:41:29 psytux kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x408
Feb 24 12:41:29 psytux kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Feb 24 12:41:29 psytux kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Feb 24 12:41:29 psytux kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Feb 24 12:41:29 psytux kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
Feb 24 12:41:29 psytux kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
Feb 24 12:41:29 psytux kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Feb 24 12:41:29 psytux kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Feb 24 12:41:29 psytux kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
Feb 24 12:41:29 psytux kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
Feb 24 12:41:29 psytux kernel: [    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
Feb 24 12:41:29 psytux kernel: [    0.000000] IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
Feb 24 12:41:29 psytux kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Feb 24 12:41:29 psytux kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Feb 24 12:41:29 psytux kernel: [    0.000000] ACPI: IRQ0 used by override.
Feb 24 12:41:29 psytux kernel: [    0.000000] ACPI: IRQ2 used by override.
Feb 24 12:41:29 psytux kernel: [    0.000000] ACPI: IRQ9 used by override.
Feb 24 12:41:29 psytux kernel: [    0.000000] Using ACPI (MADT) for SMP configuration information
Feb 24 12:41:29 psytux kernel: [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
Feb 24 12:41:29 psytux kernel: [    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
Feb 24 12:41:29 psytux kernel: [    0.000000] nr_irqs_gsi: 24
Feb 24 12:41:29 psytux kernel: [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Feb 24 12:41:29 psytux kernel: [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ef000
Feb 24 12:41:29 psytux kernel: [    0.000000] PM: Registered nosave memory: 00000000000ef000 - 0000000000100000
Feb 24 12:41:29 psytux kernel: [    0.000000] PM: Registered nosave memory: 0000000077130000 - 0000000077140000
Feb 24 12:41:29 psytux kernel: [    0.000000] PM: Registered nosave memory: 000000007b4e0000 - 000000007b6e0000
Feb 24 12:41:29 psytux kernel: [    0.000000] PM: Registered nosave memory: 000000007b993000 - 000000007b99b000
Feb 24 12:41:29 psytux kernel: [    0.000000] PM: Registered nosave memory: 000000007b9bf000 - 000000007b9cf000
Feb 24 12:41:29 psytux kernel: [    0.000000] PM: Registered nosave memory: 000000007b9cf000 - 000000007bacf000
Feb 24 12:41:29 psytux kernel: [    0.000000] PM: Registered nosave memory: 000000007bacf000 - 000000007baff000
Feb 24 12:41:29 psytux kernel: [    0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
Feb 24 12:41:29 psytux kernel: [    0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
Feb 24 12:41:29 psytux kernel: [    0.000000] PERCPU: Embedded 26 pages at ffff880001011000, static data 76256 bytes
Feb 24 12:41:29 psytux kernel: [    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 497146
Feb 24 12:41:29 psytux kernel: [    0.000000] Policy zone: DMA32
Feb 24 12:41:29 psytux kernel: [    0.000000] Kernel command line: BOOT_IMAGE=//vmlinuz-2.6.30-2-amd64 root=/dev/mapper/psytux-root ro video=i915 quiet
Feb 24 12:41:29 psytux kernel: [    0.000000] Initializing CPU#0
Feb 24 12:41:29 psytux kernel: [    0.000000] Experimental hierarchical RCU implementation.
Feb 24 12:41:29 psytux kernel: [    0.000000] Experimental hierarchical RCU init done.
Feb 24 12:41:29 psytux kernel: [    0.000000] NR_IRQS:4352 nr_irqs:440
Feb 24 12:41:29 psytux kernel: [    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
Feb 24 12:41:29 psytux kernel: [    0.000000] Extended CMOS year: 2000
Feb 24 12:41:29 psytux kernel: [    0.000000] Fast TSC calibration using PIT
Feb 24 12:41:29 psytux kernel: [    0.000000] Detected 2393.776 MHz processor.
Feb 24 12:41:29 psytux kernel: [    0.004000] Console: colour dummy device 80x25
Feb 24 12:41:29 psytux kernel: [    0.004000] console [tty0] enabled
Feb 24 12:41:29 psytux kernel: [    0.004000] Checking aperture...
Feb 24 12:41:29 psytux kernel: [    0.004000] No AGP bridge found
Feb 24 12:41:29 psytux kernel: [    0.004000] Calgary: detecting Calgary via BIOS EBDA area
Feb 24 12:41:29 psytux kernel: [    0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Feb 24 12:41:29 psytux kernel: [    0.004000] Memory: 1978284k/2026496k available (2785k kernel code, 3812k absent, 44400k reserved, 1399k data, 560k init)
Feb 24 12:41:29 psytux kernel: [    0.004000] hpet clockevent registered
Feb 24 12:41:29 psytux kernel: [    0.004000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Feb 24 12:41:29 psytux kernel: [    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.55 BogoMIPS (lpj=9575104)
Feb 24 12:41:29 psytux kernel: [    0.004000] Security Framework initialized
Feb 24 12:41:29 psytux kernel: [    0.004000] SELinux:  Disabled at boot.
Feb 24 12:41:29 psytux kernel: [    0.004000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Feb 24 12:41:29 psytux kernel: [    0.004000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Feb 24 12:41:29 psytux kernel: [    0.004000] Mount-cache hash table entries: 256
Feb 24 12:41:29 psytux kernel: [    0.004000] Initializing cgroup subsys ns
Feb 24 12:41:29 psytux kernel: [    0.004000] Initializing cgroup subsys cpuacct
Feb 24 12:41:29 psytux kernel: [    0.004000] Initializing cgroup subsys devices
Feb 24 12:41:29 psytux kernel: [    0.004000] Initializing cgroup subsys freezer
Feb 24 12:41:29 psytux kernel: [    0.004000] Initializing cgroup subsys net_cls
Feb 24 12:41:29 psytux kernel: [    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
Feb 24 12:41:29 psytux kernel: [    0.004000] CPU: L2 cache: 3072K
Feb 24 12:41:29 psytux kernel: [    0.004000] CPU 0/0x0 -> Node 0
Feb 24 12:41:29 psytux kernel: [    0.004000] CPU: Physical Processor ID: 0
Feb 24 12:41:29 psytux kernel: [    0.004000] CPU: Processor Core ID: 0
Feb 24 12:41:29 psytux kernel: [    0.004000] CPU0: Thermal monitoring handled by SMI
Feb 24 12:41:29 psytux kernel: [    0.004000] using mwait in idle threads.
Feb 24 12:41:29 psytux kernel: [    0.004000] ACPI: Core revision 20090320
Feb 24 12:41:29 psytux kernel: [    0.028075] Setting APIC routing to flat
Feb 24 12:41:29 psytux kernel: [    0.028494] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Feb 24 12:41:29 psytux kernel: [    0.070435] CPU0: Intel(R) Core(TM)2 Duo CPU     P8600  @ 2.40GHz stepping 06
Feb 24 12:41:29 psytux kernel: [    0.072001] Booting processor 1 APIC 0x1 ip 0x6000
Feb 24 12:41:29 psytux kernel: [    0.004000] Initializing CPU#1
Feb 24 12:41:29 psytux kernel: [    0.004000] Calibrating delay using timer specific routine.. 4787.96 BogoMIPS (lpj=9575939)
Feb 24 12:41:29 psytux kernel: [    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
Feb 24 12:41:29 psytux kernel: [    0.004000] CPU: L2 cache: 3072K
Feb 24 12:41:29 psytux kernel: [    0.004000] CPU 1/0x1 -> Node 0
Feb 24 12:41:29 psytux kernel: [    0.004000] CPU: Physical Processor ID: 0
Feb 24 12:41:29 psytux kernel: [    0.004000] CPU: Processor Core ID: 1
Feb 24 12:41:29 psytux kernel: [    0.004000] CPU1: Thermal monitoring enabled (TM2)
Feb 24 12:41:29 psytux kernel: [    0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
Feb 24 12:41:29 psytux kernel: [    0.157363] CPU1: Intel(R) Core(TM)2 Duo CPU     P8600  @ 2.40GHz stepping 06
Feb 24 12:41:29 psytux kernel: [    0.157389] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Feb 24 12:41:29 psytux kernel: [    0.160026] Brought up 2 CPUs
Feb 24 12:41:29 psytux kernel: [    0.160028] Total of 2 processors activated (9575.52 BogoMIPS).
Feb 24 12:41:29 psytux kernel: [    0.160101] CPU0 attaching sched-domain:
Feb 24 12:41:29 psytux kernel: [    0.160104]  domain 0: span 0-1 level MC
Feb 24 12:41:29 psytux kernel: [    0.160106]   groups: 0 1
Feb 24 12:41:29 psytux kernel: [    0.160110] CPU1 attaching sched-domain:
Feb 24 12:41:29 psytux kernel: [    0.160112]  domain 0: span 0-1 level MC
Feb 24 12:41:29 psytux kernel: [    0.160113]   groups: 1 0
Feb 24 12:41:29 psytux kernel: [    0.160172] net_namespace: 1936 bytes
Feb 24 12:41:29 psytux kernel: [    0.160172] Booting paravirtualized kernel on bare hardware
Feb 24 12:41:29 psytux kernel: [    0.160172] regulator: core version 0.5
Feb 24 12:41:29 psytux kernel: [    0.160172] NET: Registered protocol family 16
Feb 24 12:41:29 psytux kernel: [    0.160172] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
Feb 24 12:41:29 psytux kernel: [    0.160172] ACPI: bus type pci registered
Feb 24 12:41:29 psytux kernel: [    0.160172] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
Feb 24 12:41:29 psytux kernel: [    0.160172] PCI: MCFG area at e0000000 reserved in E820
Feb 24 12:41:29 psytux kernel: [    0.173323] PCI: Using MMCONFIG at e0000000 - efffffff
Feb 24 12:41:29 psytux kernel: [    0.173324] PCI: Using configuration type 1 for base access
Feb 24 12:41:29 psytux kernel: [    0.173338] bio: create slab <bio-0> at 0
Feb 24 12:41:29 psytux kernel: [    0.173338] ACPI: EC: Look up EC in DSDT
Feb 24 12:41:29 psytux kernel: [    0.193231] ACPI: BIOS _OSI(Linux) query ignored
Feb 24 12:41:29 psytux kernel: [    0.215192] ACPI: EC: non-query interrupt received, switching to interrupt mode
Feb 24 12:41:29 psytux kernel: [    0.272184] ACPI: Interpreter enabled
Feb 24 12:41:29 psytux kernel: [    0.272188] ACPI: (supports S0 S3 S4 S5)
Feb 24 12:41:29 psytux kernel: [    0.272209] ACPI: Using IOAPIC for interrupt routing
Feb 24 12:41:29 psytux kernel: [    0.288482] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
Feb 24 12:41:29 psytux kernel: [    0.288482] ACPI: EC: driver started in interrupt mode
Feb 24 12:41:29 psytux kernel: [    0.288482] ACPI: Power Resource [APPR] (off)
Feb 24 12:41:29 psytux kernel: [    0.288482] ACPI: Power Resource [COMP] (on)
Feb 24 12:41:29 psytux kernel: [    0.288565] ACPI: Power Resource [LPP] (on)
Feb 24 12:41:29 psytux kernel: [    0.288687] ACPI: Power Resource [PFN0] (off)
Feb 24 12:41:29 psytux kernel: [    0.288807] ACPI: Power Resource [PFN1] (off)
Feb 24 12:41:29 psytux kernel: [    0.288929] ACPI: Power Resource [PFN2] (off)
Feb 24 12:41:29 psytux kernel: [    0.289048] ACPI: Power Resource [PFN3] (off)
Feb 24 12:41:29 psytux kernel: [    0.289168] ACPI: Power Resource [PFN4] (off)
Feb 24 12:41:29 psytux kernel: [    0.292179] ACPI: No dock devices found.
Feb 24 12:41:29 psytux kernel: [    0.292941] ACPI: PCI Root Bridge [PCI0] (0000:00)
Feb 24 12:41:29 psytux kernel: [    0.292974] DMAR: Forcing write-buffer flush capability
Feb 24 12:41:29 psytux kernel: [    0.292974] pci 0000:00:02.0: reg 10 64bit mmio: [0x98000000-0x983fffff]
Feb 24 12:41:29 psytux kernel: [    0.292974] pci 0000:00:02.0: reg 18 64bit mmio: [0x80000000-0x8fffffff]
Feb 24 12:41:29 psytux kernel: [    0.292974] pci 0000:00:02.0: reg 20 io port: [0x60f0-0x60f7]
Feb 24 12:41:29 psytux kernel: [    0.292974] pci 0000:00:02.1: reg 10 64bit mmio: [0x98400000-0x984fffff]
Feb 24 12:41:29 psytux kernel: [    0.292974] pci 0000:00:1a.0: reg 20 io port: [0x60c0-0x60df]
Feb 24 12:41:29 psytux kernel: [    0.292974] pci 0000:00:1a.1: reg 20 io port: [0x60a0-0x60bf]
Feb 24 12:41:29 psytux kernel: [    0.292974] pci 0000:00:1a.2: reg 20 io port: [0x6080-0x609f]
Feb 24 12:41:29 psytux kernel: [    0.292974] pci 0000:00:1a.7: reg 10 32bit mmio: [0x98904c00-0x98904fff]
Feb 24 12:41:29 psytux kernel: [    0.292974] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
Feb 24 12:41:29 psytux kernel: [    0.292974] pci 0000:00:1a.7: PME# disabled
Feb 24 12:41:29 psytux kernel: [    0.292974] pci 0000:00:1b.0: reg 10 64bit mmio: [0x98900000-0x98903fff]
Feb 24 12:41:29 psytux kernel: [    0.292974] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Feb 24 12:41:29 psytux kernel: [    0.292976] pci 0000:00:1b.0: PME# disabled
Feb 24 12:41:29 psytux kernel: [    0.293108] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Feb 24 12:41:29 psytux kernel: [    0.293117] pci 0000:00:1c.0: PME# disabled
Feb 24 12:41:29 psytux kernel: [    0.293252] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
Feb 24 12:41:29 psytux kernel: [    0.293261] pci 0000:00:1c.1: PME# disabled
Feb 24 12:41:29 psytux kernel: [    0.293382] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
Feb 24 12:41:29 psytux kernel: [    0.293392] pci 0000:00:1c.2: PME# disabled
Feb 24 12:41:29 psytux kernel: [    0.293516] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
Feb 24 12:41:29 psytux kernel: [    0.293526] pci 0000:00:1c.4: PME# disabled
Feb 24 12:41:29 psytux kernel: [    0.293654] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
Feb 24 12:41:29 psytux kernel: [    0.293664] pci 0000:00:1c.5: PME# disabled
Feb 24 12:41:29 psytux kernel: [    0.293770] pci 0000:00:1d.0: reg 20 io port: [0x6060-0x607f]
Feb 24 12:41:29 psytux kernel: [    0.293890] pci 0000:00:1d.1: reg 20 io port: [0x6040-0x605f]
Feb 24 12:41:29 psytux kernel: [    0.294009] pci 0000:00:1d.2: reg 20 io port: [0x6020-0x603f]
Feb 24 12:41:29 psytux kernel: [    0.294154] pci 0000:00:1d.7: reg 10 32bit mmio: [0x98904800-0x98904bff]
Feb 24 12:41:29 psytux kernel: [    0.294238] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
Feb 24 12:41:29 psytux kernel: [    0.294249] pci 0000:00:1d.7: PME# disabled
Feb 24 12:41:29 psytux kernel: [    0.294567] pci 0000:00:1f.2: reg 10 io port: [0x60e8-0x60ef]
Feb 24 12:41:29 psytux kernel: [    0.294581] pci 0000:00:1f.2: reg 14 io port: [0x60fc-0x60ff]
Feb 24 12:41:29 psytux kernel: [    0.294593] pci 0000:00:1f.2: reg 18 io port: [0x60e0-0x60e7]
Feb 24 12:41:29 psytux kernel: [    0.294606] pci 0000:00:1f.2: reg 1c io port: [0x60f8-0x60fb]
Feb 24 12:41:29 psytux kernel: [    0.294619] pci 0000:00:1f.2: reg 20 io port: [0x6000-0x601f]
Feb 24 12:41:29 psytux kernel: [    0.294632] pci 0000:00:1f.2: reg 24 32bit mmio: [0x98904000-0x989047ff]
Feb 24 12:41:29 psytux kernel: [    0.294690] pci 0000:00:1f.2: PME# supported from D3hot
Feb 24 12:41:29 psytux kernel: [    0.294700] pci 0000:00:1f.2: PME# disabled
Feb 24 12:41:29 psytux kernel: [    0.294909] pci 0000:00:1c.0: bridge 32bit mmio: [0x98800000-0x988fffff]
Feb 24 12:41:29 psytux kernel: [    0.296052] pci 0000:02:00.0: reg 10 64bit mmio: [0x98700000-0x98701fff]
Feb 24 12:41:29 psytux kernel: [    0.296180] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
Feb 24 12:41:29 psytux kernel: [    0.296193] pci 0000:02:00.0: PME# disabled
Feb 24 12:41:29 psytux kernel: [    0.296351] pci 0000:00:1c.1: bridge 32bit mmio: [0x98700000-0x987fffff]
Feb 24 12:41:29 psytux kernel: [    0.296525] pci 0000:00:1c.2: bridge io port: [0x4000-0x5fff]
Feb 24 12:41:29 psytux kernel: [    0.296535] pci 0000:00:1c.2: bridge 32bit mmio: [0x94000000-0x97ffffff]
Feb 24 12:41:29 psytux kernel: [    0.296709] pci 0000:00:1c.4: bridge io port: [0x2000-0x3fff]
Feb 24 12:41:29 psytux kernel: [    0.296719] pci 0000:00:1c.4: bridge 32bit mmio: [0x90000000-0x93ffffff]
Feb 24 12:41:29 psytux kernel: [    0.297106] pci 0000:85:00.0: reg 10 64bit mmio: [0x98600000-0x9860ffff]
Feb 24 12:41:29 psytux kernel: [    0.297521] pci 0000:85:00.0: PME# supported from D3hot D3cold
Feb 24 12:41:29 psytux kernel: [    0.297546] pci 0000:85:00.0: PME# disabled
Feb 24 12:41:29 psytux kernel: [    0.297783] pci 0000:00:1c.5: bridge 32bit mmio: [0x98600000-0x986fffff]
Feb 24 12:41:29 psytux kernel: [    0.297871] pci 0000:86:02.0: reg 10 32bit mmio: [0x98500000-0x98500fff]
Feb 24 12:41:29 psytux kernel: [    0.297956] pci 0000:86:02.0: supports D1 D2
Feb 24 12:41:29 psytux kernel: [    0.297958] pci 0000:86:02.0: PME# supported from D0 D1 D2 D3hot
Feb 24 12:41:29 psytux kernel: [    0.297968] pci 0000:86:02.0: PME# disabled
Feb 24 12:41:29 psytux kernel: [    0.298084] pci 0000:00:1e.0: transparent bridge
Feb 24 12:41:29 psytux kernel: [    0.298097] pci 0000:00:1e.0: bridge 32bit mmio: [0x98500000-0x985fffff]
Feb 24 12:41:29 psytux kernel: [    0.298148] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Feb 24 12:41:29 psytux kernel: [    0.298380] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
Feb 24 12:41:29 psytux kernel: [    0.298473] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
Feb 24 12:41:29 psytux kernel: [    0.298569] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
Feb 24 12:41:29 psytux kernel: [    0.298678] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
Feb 24 12:41:29 psytux kernel: [    0.298785] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
Feb 24 12:41:29 psytux kernel: [    0.298903] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
Feb 24 12:41:29 psytux kernel: [    0.320155] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
Feb 24 12:41:29 psytux kernel: [    0.320266] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
Feb 24 12:41:29 psytux kernel: [    0.320421] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
Feb 24 12:41:29 psytux kernel: [    0.320575] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
Feb 24 12:41:29 psytux kernel: [    0.320729] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
Feb 24 12:41:29 psytux kernel: [    0.320882] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
Feb 24 12:41:29 psytux kernel: [    0.321037] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
Feb 24 12:41:29 psytux kernel: [    0.321190] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
Feb 24 12:41:29 psytux kernel: [    0.321267] usbcore: registered new interface driver usbfs
Feb 24 12:41:29 psytux kernel: [    0.321267] usbcore: registered new interface driver hub
Feb 24 12:41:29 psytux kernel: [    0.321267] usbcore: registered new device driver usb
Feb 24 12:41:29 psytux kernel: [    0.321267] PCI: Using ACPI for IRQ routing
Feb 24 12:41:29 psytux kernel: [    0.332028] DMAR:Host address width 36
Feb 24 12:41:29 psytux kernel: [    0.332031] DMAR:DRHD (flags: 0x00000000)base: 0x00000000feb03000
Feb 24 12:41:29 psytux kernel: [    0.332040] DMAR:DRHD (flags: 0x00000000)base: 0x00000000feb01000
Feb 24 12:41:29 psytux kernel: [    0.332046] DMAR:DRHD (flags: 0x00000001)base: 0x00000000feb02000
Feb 24 12:41:29 psytux kernel: [    0.332051] DMAR:RMRR base: 0x0001201800001001 end: 0x08004010c0100a00
Feb 24 12:41:29 psytux kernel: [    0.332054] DMAR:RMRR base: 0x000000007bc00000 end: 0x000000007fffffff
Feb 24 12:41:29 psytux kernel: [    0.332104] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
Feb 24 12:41:29 psytux kernel: [    0.332108] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Feb 24 12:41:29 psytux kernel: [    0.348005] pnp: PnP ACPI init
Feb 24 12:41:29 psytux kernel: [    0.348012] ACPI: bus type pnp registered
Feb 24 12:41:29 psytux kernel: [    0.353910]   alloc irq_desc for 23 on cpu 0 node 0
Feb 24 12:41:29 psytux kernel: [    0.353912]   alloc kstat_irqs on cpu 0 node 0
Feb 24 12:41:29 psytux kernel: [    0.354505] pnp: PnP ACPI: found 14 devices
Feb 24 12:41:29 psytux kernel: [    0.354507] ACPI: ACPI bus type pnp unregistered
Feb 24 12:41:29 psytux kernel: [    0.354515] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
Feb 24 12:41:29 psytux kernel: [    0.354518] system 00:01: iomem range 0xfed10000-0xfed13fff has been reserved
Feb 24 12:41:29 psytux kernel: [    0.354522] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
Feb 24 12:41:29 psytux kernel: [    0.354524] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
Feb 24 12:41:29 psytux kernel: [    0.354527] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
Feb 24 12:41:29 psytux kernel: [    0.354529] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
Feb 24 12:41:29 psytux kernel: [    0.354532] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
Feb 24 12:41:29 psytux kernel: [    0.354534] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
Feb 24 12:41:29 psytux kernel: [    0.354540] system 00:05: iomem range 0xfed00000-0xfed003ff has been reserved
Feb 24 12:41:29 psytux kernel: [    0.354545] system 00:07: ioport range 0x200-0x27f has been reserved
Feb 24 12:41:29 psytux kernel: [    0.354547] system 00:07: ioport range 0x1000-0x1003 has been reserved
Feb 24 12:41:29 psytux kernel: [    0.354550] system 00:07: ioport range 0x1010-0x101f has been reserved
Feb 24 12:41:29 psytux kernel: [    0.354553] system 00:07: ioport range 0xffff-0xffff has been reserved
Feb 24 12:41:29 psytux kernel: [    0.354555] system 00:07: ioport range 0x400-0x47f has been reserved
Feb 24 12:41:29 psytux kernel: [    0.354557] system 00:07: ioport range 0x500-0x57f has been reserved
Feb 24 12:41:29 psytux kernel: [    0.354560] system 00:07: ioport range 0xef80-0xef9f has been reserved
Feb 24 12:41:29 psytux kernel: [    0.359532] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
Feb 24 12:41:29 psytux kernel: [    0.359534] pci 0000:00:1c.0:   IO window: disabled
Feb 24 12:41:29 psytux kernel: [    0.359546] pci 0000:00:1c.0:   MEM window: 0x98800000-0x988fffff
Feb 24 12:41:29 psytux kernel: [    0.359556] pci 0000:00:1c.0:   PREFETCH window: disabled
Feb 24 12:41:29 psytux kernel: [    0.359568] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
Feb 24 12:41:29 psytux kernel: [    0.359570] pci 0000:00:1c.1:   IO window: disabled
Feb 24 12:41:29 psytux kernel: [    0.359580] pci 0000:00:1c.1:   MEM window: 0x98700000-0x987fffff
Feb 24 12:41:29 psytux kernel: [    0.359590] pci 0000:00:1c.1:   PREFETCH window: disabled
Feb 24 12:41:29 psytux kernel: [    0.359603] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
Feb 24 12:41:29 psytux kernel: [    0.359612] pci 0000:00:1c.2:   IO window: 0x4000-0x5fff
Feb 24 12:41:29 psytux kernel: [    0.359623] pci 0000:00:1c.2:   MEM window: 0x94000000-0x97ffffff
Feb 24 12:41:29 psytux kernel: [    0.359633] pci 0000:00:1c.2:   PREFETCH window: disabled
Feb 24 12:41:29 psytux kernel: [    0.359645] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:44
Feb 24 12:41:29 psytux kernel: [    0.359654] pci 0000:00:1c.4:   IO window: 0x2000-0x3fff
Feb 24 12:41:29 psytux kernel: [    0.359665] pci 0000:00:1c.4:   MEM window: 0x90000000-0x93ffffff
Feb 24 12:41:29 psytux kernel: [    0.359675] pci 0000:00:1c.4:   PREFETCH window: disabled
Feb 24 12:41:29 psytux kernel: [    0.359687] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:85
Feb 24 12:41:29 psytux kernel: [    0.359689] pci 0000:00:1c.5:   IO window: disabled
Feb 24 12:41:29 psytux kernel: [    0.359700] pci 0000:00:1c.5:   MEM window: 0x98600000-0x986fffff
Feb 24 12:41:29 psytux kernel: [    0.359711] pci 0000:00:1c.5:   PREFETCH window: disabled
Feb 24 12:41:29 psytux kernel: [    0.359723] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:86
Feb 24 12:41:29 psytux kernel: [    0.359725] pci 0000:00:1e.0:   IO window: disabled
Feb 24 12:41:29 psytux kernel: [    0.359736] pci 0000:00:1e.0:   MEM window: 0x98500000-0x985fffff
Feb 24 12:41:29 psytux kernel: [    0.359746] pci 0000:00:1e.0:   PREFETCH window: disabled
Feb 24 12:41:29 psytux kernel: [    0.359777]   alloc irq_desc for 16 on cpu 0 node 0
Feb 24 12:41:29 psytux kernel: [    0.359779]   alloc kstat_irqs on cpu 0 node 0
Feb 24 12:41:29 psytux kernel: [    0.359783] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Feb 24 12:41:29 psytux kernel: [    0.359797] pci 0000:00:1c.0: setting latency timer to 64
Feb 24 12:41:29 psytux kernel: [    0.359817]   alloc irq_desc for 17 on cpu 0 node 0
Feb 24 12:41:29 psytux kernel: [    0.359818]   alloc kstat_irqs on cpu 0 node 0
Feb 24 12:41:29 psytux kernel: [    0.359821] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Feb 24 12:41:29 psytux kernel: [    0.359829] pci 0000:00:1c.1: setting latency timer to 64
Feb 24 12:41:29 psytux kernel: [    0.359849]   alloc irq_desc for 18 on cpu 0 node 0
Feb 24 12:41:29 psytux kernel: [    0.359850]   alloc kstat_irqs on cpu 0 node 0
Feb 24 12:41:29 psytux kernel: [    0.359853] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Feb 24 12:41:29 psytux kernel: [    0.359861] pci 0000:00:1c.2: setting latency timer to 64
Feb 24 12:41:29 psytux kernel: [    0.359880] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Feb 24 12:41:29 psytux kernel: [    0.359891] pci 0000:00:1c.4: setting latency timer to 64
Feb 24 12:41:29 psytux kernel: [    0.359910] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Feb 24 12:41:29 psytux kernel: [    0.359920] pci 0000:00:1c.5: setting latency timer to 64
Feb 24 12:41:29 psytux kernel: [    0.359945] pci 0000:00:1e.0: setting latency timer to 64
Feb 24 12:41:29 psytux kernel: [    0.359955] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
Feb 24 12:41:29 psytux kernel: [    0.359957] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
Feb 24 12:41:29 psytux kernel: [    0.359959] pci_bus 0000:01: resource 1 mem: [0x98800000-0x988fffff]
Feb 24 12:41:29 psytux kernel: [    0.359961] pci_bus 0000:02: resource 1 mem: [0x98700000-0x987fffff]
Feb 24 12:41:29 psytux kernel: [    0.359963] pci_bus 0000:03: resource 0 io:  [0x4000-0x5fff]
Feb 24 12:41:29 psytux kernel: [    0.359965] pci_bus 0000:03: resource 1 mem: [0x94000000-0x97ffffff]
Feb 24 12:41:29 psytux kernel: [    0.359967] pci_bus 0000:44: resource 0 io:  [0x2000-0x3fff]
Feb 24 12:41:29 psytux kernel: [    0.359969] pci_bus 0000:44: resource 1 mem: [0x90000000-0x93ffffff]
Feb 24 12:41:29 psytux kernel: [    0.359971] pci_bus 0000:85: resource 1 mem: [0x98600000-0x986fffff]
Feb 24 12:41:29 psytux kernel: [    0.359973] pci_bus 0000:86: resource 1 mem: [0x98500000-0x985fffff]
Feb 24 12:41:29 psytux kernel: [    0.359975] pci_bus 0000:86: resource 3 io:  [0x00-0xffff]
Feb 24 12:41:29 psytux kernel: [    0.359977] pci_bus 0000:86: resource 4 mem: [0x000000-0xffffffffffffffff]
Feb 24 12:41:29 psytux kernel: [    0.360056] NET: Registered protocol family 2
Feb 24 12:41:29 psytux kernel: [    0.396122] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
Feb 24 12:41:29 psytux kernel: [    0.396965] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
Feb 24 12:41:29 psytux kernel: [    0.399033] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Feb 24 12:41:29 psytux kernel: [    0.399638] TCP: Hash tables configured (established 262144 bind 65536)
Feb 24 12:41:29 psytux kernel: [    0.399640] TCP reno registered
Feb 24 12:41:29 psytux kernel: [    0.408158] NET: Registered protocol family 1
Feb 24 12:41:29 psytux kernel: [    0.408214] Trying to unpack rootfs image as initramfs...
Feb 24 12:41:29 psytux kernel: [    0.501437] Switched to high resolution mode on CPU 1
Feb 24 12:41:29 psytux kernel: [    0.504018] Switched to high resolution mode on CPU 0
Feb 24 12:41:29 psytux kernel: [    0.607912] Freeing initrd memory: 9123k freed
Feb 24 12:41:29 psytux kernel: [    0.614068] audit: initializing netlink socket (disabled)
Feb 24 12:41:29 psytux kernel: [    0.614092] type=2000 audit(1267011639.612:1): initialized
Feb 24 12:41:29 psytux kernel: [    0.614360] HugeTLB registered 2 MB page size, pre-allocated 0 pages
Feb 24 12:41:29 psytux kernel: [    0.614484] VFS: Disk quotas dquot_6.5.2
Feb 24 12:41:29 psytux kernel: [    0.614516] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Feb 24 12:41:29 psytux kernel: [    0.614574] msgmni has been set to 3881
Feb 24 12:41:29 psytux kernel: [    0.614722] alg: No test for stdrng (krng)
Feb 24 12:41:29 psytux kernel: [    0.614774] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Feb 24 12:41:29 psytux kernel: [    0.614777] io scheduler noop registered
Feb 24 12:41:29 psytux kernel: [    0.614778] io scheduler anticipatory registered
Feb 24 12:41:29 psytux kernel: [    0.614780] io scheduler deadline registered
Feb 24 12:41:29 psytux kernel: [    0.614804] io scheduler cfq registered (default)
Feb 24 12:41:29 psytux kernel: [    0.614817] pci 0000:00:02.0: Boot video device
Feb 24 12:41:29 psytux kernel: [    0.615327]   alloc irq_desc for 24 on cpu 0 node 0
Feb 24 12:41:29 psytux kernel: [    0.615329]   alloc kstat_irqs on cpu 0 node 0
Feb 24 12:41:29 psytux kernel: [    0.615347] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
Feb 24 12:41:29 psytux kernel: [    0.615381] pcieport-driver 0000:00:1c.0: setting latency timer to 64
Feb 24 12:41:29 psytux kernel: [    0.615639]   alloc irq_desc for 25 on cpu 0 node 0
Feb 24 12:41:29 psytux kernel: [    0.615640]   alloc kstat_irqs on cpu 0 node 0
Feb 24 12:41:29 psytux kernel: [    0.615655] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
Feb 24 12:41:29 psytux kernel: [    0.615682] pcieport-driver 0000:00:1c.1: setting latency timer to 64
Feb 24 12:41:29 psytux kernel: [    0.615941]   alloc irq_desc for 26 on cpu 0 node 0
Feb 24 12:41:29 psytux kernel: [    0.615943]   alloc kstat_irqs on cpu 0 node 0
Feb 24 12:41:29 psytux kernel: [    0.615957] pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
Feb 24 12:41:29 psytux kernel: [    0.615978] pcieport-driver 0000:00:1c.2: setting latency timer to 64
Feb 24 12:41:29 psytux kernel: [    0.616241]   alloc irq_desc for 27 on cpu 0 node 0
Feb 24 12:41:29 psytux kernel: [    0.616243]   alloc kstat_irqs on cpu 0 node 0
Feb 24 12:41:29 psytux kernel: [    0.616257] pcieport-driver 0000:00:1c.4: irq 27 for MSI/MSI-X
Feb 24 12:41:29 psytux kernel: [    0.616279] pcieport-driver 0000:00:1c.4: setting latency timer to 64
Feb 24 12:41:29 psytux kernel: [    0.616561]   alloc irq_desc for 28 on cpu 0 node 0
Feb 24 12:41:29 psytux kernel: [    0.616562]   alloc kstat_irqs on cpu 0 node 0
Feb 24 12:41:29 psytux kernel: [    0.616576] pcieport-driver 0000:00:1c.5: irq 28 for MSI/MSI-X
Feb 24 12:41:29 psytux kernel: [    0.616598] pcieport-driver 0000:00:1c.5: setting latency timer to 64
Feb 24 12:41:29 psytux kernel: [    0.617166] vesafb: framebuffer at 0x80000000, mapped to 0xffffc20010980000, using 5120k, total 5120k
Feb 24 12:41:29 psytux kernel: [    0.617168] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
Feb 24 12:41:29 psytux kernel: [    0.617170] vesafb: scrolling: redraw
Feb 24 12:41:29 psytux kernel: [    0.617172] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Feb 24 12:41:29 psytux kernel: [    0.657331] Console: switching to colour frame buffer device 160x64
Feb 24 12:41:29 psytux kernel: [    0.697227] fb0: VESA VGA frame buffer device
Feb 24 12:41:29 psytux kernel: [    0.699897] Linux agpgart interface v0.103
Feb 24 12:41:29 psytux kernel: [    0.699899] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Feb 24 12:41:29 psytux kernel: [    0.700047] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Feb 24 12:41:29 psytux kernel: [    0.700490] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Feb 24 12:41:29 psytux kernel: [    0.701899] brd: module loaded
Feb 24 12:41:29 psytux kernel: [    0.701957] input: Macintosh mouse button emulation as /devices/virtual/input/input0
Feb 24 12:41:29 psytux kernel: [    0.702116] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Feb 24 12:41:29 psytux kernel: [    0.704046] i8042.c: Detected active multiplexing controller, rev 1.1.
Feb 24 12:41:29 psytux kernel: [    0.704757] serio: i8042 KBD port at 0x60,0x64 irq 1
Feb 24 12:41:29 psytux kernel: [    0.704763] serio: i8042 AUX0 port at 0x60,0x64 irq 12
Feb 24 12:41:29 psytux kernel: [    0.704766] serio: i8042 AUX1 port at 0x60,0x64 irq 12
Feb 24 12:41:29 psytux kernel: [    0.704768] serio: i8042 AUX2 port at 0x60,0x64 irq 12
Feb 24 12:41:29 psytux kernel: [    0.704770] serio: i8042 AUX3 port at 0x60,0x64 irq 12
Feb 24 12:41:29 psytux kernel: [    0.704959] mice: PS/2 mouse device common for all mice
Feb 24 12:41:29 psytux kernel: [    0.705040] rtc_cmos 00:08: RTC can wake from S4
Feb 24 12:41:29 psytux kernel: [    0.705160] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
Feb 24 12:41:29 psytux kernel: [    0.705213] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
Feb 24 12:41:29 psytux kernel: [    0.705241] cpuidle: using governor ladder
Feb 24 12:41:29 psytux kernel: [    0.705243] cpuidle: using governor menu
Feb 24 12:41:29 psytux kernel: [    0.705248] No iBFT detected.
Feb 24 12:41:29 psytux kernel: [    0.705498] TCP cubic registered
Feb 24 12:41:29 psytux kernel: [    0.705543] NET: Registered protocol family 10
Feb 24 12:41:29 psytux kernel: [    0.705908] lo: Disabled Privacy Extensions
Feb 24 12:41:29 psytux kernel: [    0.706122] Mobile IPv6
Feb 24 12:41:29 psytux kernel: [    0.706125] NET: Registered protocol family 17
Feb 24 12:41:29 psytux kernel: [    0.706249] registered taskstats version 1
Feb 24 12:41:29 psytux kernel: [    0.706388] rtc_cmos 00:08: setting system clock to 2010-02-24 11:40:40 UTC (1267011640)
Feb 24 12:41:29 psytux kernel: [    0.706461] Freeing unused kernel memory: 560k freed
Feb 24 12:41:29 psytux kernel: [    0.706652] Write protecting the kernel read-only data: 3796k
Feb 24 12:41:29 psytux kernel: [    0.730542] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Feb 24 12:41:29 psytux kernel: [    0.773520] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset
Feb 24 12:41:29 psytux kernel: [    0.774448] agpgart-intel 0000:00:00.0: detected 65532K stolen memory
Feb 24 12:41:29 psytux kernel: [    0.777146] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
Feb 24 12:41:29 psytux kernel: [    0.793117] [drm] Initialized drm 1.1.0 20060810
Feb 24 12:41:29 psytux kernel: [    0.798812] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Feb 24 12:41:29 psytux kernel: [    0.798816] pci 0000:00:02.0: setting latency timer to 64
Feb 24 12:41:29 psytux kernel: [    0.815252]   alloc irq_desc for 29 on cpu 0 node 0
Feb 24 12:41:29 psytux kernel: [    0.815255]   alloc kstat_irqs on cpu 0 node 0
Feb 24 12:41:29 psytux kernel: [    0.815265] pci 0000:00:02.0: irq 29 for MSI/MSI-X
Feb 24 12:41:29 psytux kernel: [    0.817924] acpi device:07: registered as cooling_device0
Feb 24 12:41:29 psytux kernel: [    0.818378] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/input/input2
Feb 24 12:41:29 psytux kernel: [    0.818384] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
Feb 24 12:41:29 psytux kernel: [    0.818442] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Feb 24 12:41:29 psytux kernel: [    0.832428] fan PNP0C0B:00: registered as cooling_device1
Feb 24 12:41:29 psytux kernel: [    0.832433] ACPI: Fan [FAN0] (off)
Feb 24 12:41:29 psytux kernel: [    0.832698] fan PNP0C0B:01: registered as cooling_device2
Feb 24 12:41:29 psytux kernel: [    0.832702] ACPI: Fan [FAN1] (off)
Feb 24 12:41:29 psytux kernel: [    0.832960] fan PNP0C0B:02: registered as cooling_device3
Feb 24 12:41:29 psytux kernel: [    0.832965] ACPI: Fan [FAN2] (off)
Feb 24 12:41:29 psytux kernel: [    0.833220] fan PNP0C0B:03: registered as cooling_device4
Feb 24 12:41:29 psytux kernel: [    0.833224] ACPI: Fan [FAN3] (off)
Feb 24 12:41:29 psytux kernel: [    0.833483] fan PNP0C0B:04: registered as cooling_device5
Feb 24 12:41:29 psytux kernel: [    0.833487] ACPI: Fan [FAN4] (off)
Feb 24 12:41:29 psytux kernel: [    0.847847] thermal LNXTHERM:01: registered as thermal_zone0
Feb 24 12:41:29 psytux kernel: [    0.847855] ACPI: Thermal Zone [DTSZ] (36 C)
Feb 24 12:41:29 psytux kernel: [    0.858890] thermal LNXTHERM:02: registered as thermal_zone1
Feb 24 12:41:29 psytux kernel: [    0.858897] ACPI: Thermal Zone [CPUZ] (46 C)
Feb 24 12:41:29 psytux kernel: [    0.863666] thermal LNXTHERM:03: registered as thermal_zone2
Feb 24 12:41:29 psytux kernel: [    0.863672] ACPI: Thermal Zone [SKNZ] (35 C)
Feb 24 12:41:29 psytux kernel: [    0.877078] thermal LNXTHERM:04: registered as thermal_zone3
Feb 24 12:41:29 psytux kernel: [    0.877084] ACPI: Thermal Zone [BATZ] (28 C)
Feb 24 12:41:29 psytux kernel: [    0.882870] thermal LNXTHERM:05: registered as thermal_zone4
Feb 24 12:41:29 psytux kernel: [    0.882877] ACPI: Thermal Zone [FDTZ] (24 C)
Feb 24 12:41:29 psytux kernel: [    0.916040] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Feb 24 12:41:29 psytux kernel: [    0.959980] SCSI subsystem initialized
Feb 24 12:41:29 psytux kernel: [    0.960064]   alloc irq_desc for 19 on cpu 0 node 0
Feb 24 12:41:29 psytux kernel: [    0.960066]   alloc kstat_irqs on cpu 0 node 0
Feb 24 12:41:29 psytux kernel: [    0.960074] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Feb 24 12:41:29 psytux kernel: [    0.960097] ehci_hcd 0000:00:1a.7: setting latency timer to 64
Feb 24 12:41:29 psytux kernel: [    0.960107] ehci_hcd 0000:00:1a.7: EHCI Host Controller
Feb 24 12:41:29 psytux kernel: [    0.960197] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
Feb 24 12:41:29 psytux kernel: [    0.964121] ehci_hcd 0000:00:1a.7: debug port 1
Feb 24 12:41:29 psytux kernel: [    0.964139] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
Feb 24 12:41:29 psytux kernel: [    0.964167] ehci_hcd 0000:00:1a.7: irq 19, io mem 0x98904c00
Feb 24 12:41:29 psytux kernel: [    0.968074] tg3.c:v3.98 (February 25, 2009)
Feb 24 12:41:29 psytux kernel: [    0.968143] tg3 0000:85:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Feb 24 12:41:29 psytux kernel: [    0.968170] tg3 0000:85:00.0: setting latency timer to 64
Feb 24 12:41:29 psytux kernel: [    0.976233] tg3 0000:85:00.0: wake-up capability disabled by ACPI
Feb 24 12:41:29 psytux kernel: [    0.976260] tg3 0000:85:00.0: PME# disabled
Feb 24 12:41:29 psytux kernel: [    0.980075] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
Feb 24 12:41:29 psytux kernel: [    0.980120] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Feb 24 12:41:29 psytux kernel: [    0.980123] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 24 12:41:29 psytux kernel: [    0.980125] usb usb1: Product: EHCI Host Controller
Feb 24 12:41:29 psytux kernel: [    0.980126] usb usb1: Manufacturer: Linux 2.6.30-2-amd64 ehci_hcd
Feb 24 12:41:29 psytux kernel: [    0.980128] usb usb1: SerialNumber: 0000:00:1a.7
Feb 24 12:41:29 psytux kernel: [    0.980194] usb usb1: configuration #1 chosen from 1 choice
Feb 24 12:41:29 psytux kernel: [    0.980222] hub 1-0:1.0: USB hub found
Feb 24 12:41:29 psytux kernel: [    0.980230] hub 1-0:1.0: 6 ports detected
Feb 24 12:41:29 psytux kernel: [    0.981614] firewire_ohci 0000:86:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Feb 24 12:41:29 psytux kernel: [    0.981633] firewire_ohci 0000:86:02.0: setting latency timer to 64
Feb 24 12:41:29 psytux kernel: [    0.991672] libata version 3.00 loaded.
Feb 24 12:41:29 psytux kernel: [    0.991667]   alloc irq_desc for 20 on cpu 0 node 0
Feb 24 12:41:29 psytux kernel: [    0.991671]   alloc kstat_irqs on cpu 0 node 0
Feb 24 12:41:29 psytux kernel: [    0.991678] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 20 (level, low) -> IRQ 20
Feb 24 12:41:29 psytux kernel: [    0.991704] ehci_hcd 0000:00:1d.7: setting latency timer to 64
Feb 24 12:41:29 psytux kernel: [    0.991714] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Feb 24 12:41:29 psytux kernel: [    0.991797] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
Feb 24 12:41:29 psytux kernel: [    0.995741] ehci_hcd 0000:00:1d.7: debug port 1
Feb 24 12:41:29 psytux kernel: [    0.995754] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
Feb 24 12:41:29 psytux kernel: [    0.995777] ehci_hcd 0000:00:1d.7: irq 20, io mem 0x98904800
Feb 24 12:41:29 psytux kernel: [    1.008012] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Feb 24 12:41:29 psytux kernel: [    1.008030] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
Feb 24 12:41:29 psytux kernel: [    1.008032] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 24 12:41:29 psytux kernel: [    1.008034] usb usb2: Product: EHCI Host Controller
Feb 24 12:41:29 psytux kernel: [    1.008035] usb usb2: Manufacturer: Linux 2.6.30-2-amd64 ehci_hcd
Feb 24 12:41:29 psytux kernel: [    1.008037] usb usb2: SerialNumber: 0000:00:1d.7
Feb 24 12:41:29 psytux kernel: [    1.008084] usb usb2: configuration #1 chosen from 1 choice
Feb 24 12:41:29 psytux kernel: [    1.008110] hub 2-0:1.0: USB hub found
Feb 24 12:41:29 psytux kernel: [    1.008116] hub 2-0:1.0: 6 ports detected
Feb 24 12:41:29 psytux kernel: [    1.008397] ahci 0000:00:1f.2: version 3.0
Feb 24 12:41:29 psytux kernel: [    1.008421]   alloc irq_desc for 21 on cpu 0 node 0
Feb 24 12:41:29 psytux kernel: [    1.008423]   alloc kstat_irqs on cpu 0 node 0
Feb 24 12:41:29 psytux kernel: [    1.008428] ahci 0000:00:1f.2: PCI INT A -> GSI 21 (level, low) -> IRQ 21
Feb 24 12:41:29 psytux kernel: [    1.008499]   alloc irq_desc for 30 on cpu 0 node 0
Feb 24 12:41:29 psytux kernel: [    1.008501]   alloc kstat_irqs on cpu 0 node 0
Feb 24 12:41:29 psytux kernel: [    1.008522] ahci 0000:00:1f.2: irq 30 for MSI/MSI-X
Feb 24 12:41:29 psytux kernel: [    1.008612] ahci: SSS flag set, parallel bus scan disabled
Feb 24 12:41:29 psytux kernel: [    1.008661] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x23 impl SATA mode
Feb 24 12:41:29 psytux kernel: [    1.008664] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems 
Feb 24 12:41:29 psytux kernel: [    1.008681] ahci 0000:00:1f.2: setting latency timer to 64
Feb 24 12:41:29 psytux kernel: [    1.010066] uhci_hcd: USB Universal Host Controller Interface driver
Feb 24 12:41:29 psytux kernel: [    1.011024] scsi0 : ahci
Feb 24 12:41:29 psytux kernel: [    1.011130] scsi1 : ahci
Feb 24 12:41:29 psytux kernel: [    1.011196] scsi2 : ahci
Feb 24 12:41:29 psytux kernel: [    1.011260] scsi3 : ahci
Feb 24 12:41:29 psytux kernel: [    1.011328] scsi4 : ahci
Feb 24 12:41:29 psytux kernel: [    1.011391] scsi5 : ahci
Feb 24 12:41:29 psytux kernel: [    1.011574] ata1: SATA max UDMA/133 abar m2048@0x98904000 port 0x98904100 irq 30
Feb 24 12:41:29 psytux kernel: [    1.011584] ata2: SATA max UDMA/133 abar m2048@0x98904000 port 0x98904180 irq 30
Feb 24 12:41:29 psytux kernel: [    1.011585] ata3: DUMMY
Feb 24 12:41:29 psytux kernel: [    1.011587] ata4: DUMMY
Feb 24 12:41:29 psytux kernel: [    1.011588] ata5: DUMMY
Feb 24 12:41:29 psytux kernel: [    1.011596] ata6: SATA max UDMA/133 abar m2048@0x98904000 port 0x98904380 irq 30
Feb 24 12:41:29 psytux kernel: [    1.011695] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Feb 24 12:41:29 psytux kernel: [    1.011708] uhci_hcd 0000:00:1a.0: setting latency timer to 64
Feb 24 12:41:29 psytux kernel: [    1.011717] uhci_hcd 0000:00:1a.0: UHCI Host Controller
Feb 24 12:41:29 psytux kernel: [    1.011775] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
Feb 24 12:41:29 psytux kernel: [    1.011833] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000060c0
Feb 24 12:41:29 psytux kernel: [    1.011877] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Feb 24 12:41:29 psytux kernel: [    1.011879] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 24 12:41:29 psytux kernel: [    1.011881] usb usb3: Product: UHCI Host Controller
Feb 24 12:41:29 psytux kernel: [    1.011882] usb usb3: Manufacturer: Linux 2.6.30-2-amd64 uhci_hcd
Feb 24 12:41:29 psytux kernel: [    1.011884] usb usb3: SerialNumber: 0000:00:1a.0
Feb 24 12:41:29 psytux kernel: [    1.011923] usb usb3: configuration #1 chosen from 1 choice
Feb 24 12:41:29 psytux kernel: [    1.011950] hub 3-0:1.0: USB hub found
Feb 24 12:41:29 psytux kernel: [    1.011956] hub 3-0:1.0: 2 ports detected
Feb 24 12:41:29 psytux kernel: [    1.012353] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Feb 24 12:41:29 psytux kernel: [    1.012365] uhci_hcd 0000:00:1a.1: setting latency timer to 64
Feb 24 12:41:29 psytux kernel: [    1.012373] uhci_hcd 0000:00:1a.1: UHCI Host Controller
Feb 24 12:41:29 psytux kernel: [    1.012417] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
Feb 24 12:41:29 psytux kernel: [    1.012472] uhci_hcd 0000:00:1a.1: irq 17, io base 0x000060a0
Feb 24 12:41:29 psytux kernel: [    1.012515] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
Feb 24 12:41:29 psytux kernel: [    1.012517] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 24 12:41:29 psytux kernel: [    1.012519] usb usb4: Product: UHCI Host Controller
Feb 24 12:41:29 psytux kernel: [    1.012520] usb usb4: Manufacturer: Linux 2.6.30-2-amd64 uhci_hcd
Feb 24 12:41:29 psytux kernel: [    1.012522] usb usb4: SerialNumber: 0000:00:1a.1
Feb 24 12:41:29 psytux kernel: [    1.012566] usb usb4: configuration #1 chosen from 1 choice
Feb 24 12:41:29 psytux kernel: [    1.012588] hub 4-0:1.0: USB hub found
Feb 24 12:41:29 psytux kernel: [    1.012594] hub 4-0:1.0: 2 ports detected
Feb 24 12:41:29 psytux kernel: [    1.012860] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Feb 24 12:41:29 psytux kernel: [    1.012866] uhci_hcd 0000:00:1a.2: setting latency timer to 64
Feb 24 12:41:29 psytux kernel: [    1.012869] uhci_hcd 0000:00:1a.2: UHCI Host Controller
Feb 24 12:41:29 psytux kernel: [    1.012915] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
Feb 24 12:41:29 psytux kernel: [    1.012964] uhci_hcd 0000:00:1a.2: irq 18, io base 0x00006080
Feb 24 12:41:29 psytux kernel: [    1.013004] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
Feb 24 12:41:29 psytux kernel: [    1.013006] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 24 12:41:29 psytux kernel: [    1.013007] usb usb5: Product: UHCI Host Controller
Feb 24 12:41:29 psytux kernel: [    1.013009] usb usb5: Manufacturer: Linux 2.6.30-2-amd64 uhci_hcd
Feb 24 12:41:29 psytux kernel: [    1.013011] usb usb5: SerialNumber: 0000:00:1a.2
Feb 24 12:41:29 psytux kernel: [    1.013046] usb usb5: configuration #1 chosen from 1 choice
Feb 24 12:41:29 psytux kernel: [    1.013070] hub 5-0:1.0: USB hub found
Feb 24 12:41:29 psytux kernel: [    1.013076] hub 5-0:1.0: 2 ports detected
Feb 24 12:41:29 psytux kernel: [    1.013264] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Feb 24 12:41:29 psytux kernel: [    1.013277] uhci_hcd 0000:00:1d.0: setting latency timer to 64
Feb 24 12:41:29 psytux kernel: [    1.013285] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Feb 24 12:41:29 psytux kernel: [    1.013331] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
Feb 24 12:41:29 psytux kernel: [    1.013367] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006060
Feb 24 12:41:29 psytux kernel: [    1.013407] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
Feb 24 12:41:29 psytux kernel: [    1.013409] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 24 12:41:29 psytux kernel: [    1.013411] usb usb6: Product: UHCI Host Controller
Feb 24 12:41:29 psytux kernel: [    1.013413] usb usb6: Manufacturer: Linux 2.6.30-2-amd64 uhci_hcd
Feb 24 12:41:29 psytux kernel: [    1.013414] usb usb6: SerialNumber: 0000:00:1d.0
Feb 24 12:41:29 psytux kernel: [    1.013451] usb usb6: configuration #1 chosen from 1 choice
Feb 24 12:41:29 psytux kernel: [    1.013474] hub 6-0:1.0: USB hub found
Feb 24 12:41:29 psytux kernel: [    1.013480] hub 6-0:1.0: 2 ports detected
Feb 24 12:41:29 psytux kernel: [    1.013669]   alloc irq_desc for 22 on cpu 0 node 0
Feb 24 12:41:29 psytux kernel: [    1.013671]   alloc kstat_irqs on cpu 0 node 0
Feb 24 12:41:29 psytux kernel: [    1.013676] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
Feb 24 12:41:29 psytux kernel: [    1.013684] uhci_hcd 0000:00:1d.1: setting latency timer to 64
Feb 24 12:41:29 psytux kernel: [    1.013693] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Feb 24 12:41:29 psytux kernel: [    1.013738] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
Feb 24 12:41:29 psytux kernel: [    1.013787] uhci_hcd 0000:00:1d.1: irq 22, io base 0x00006040
Feb 24 12:41:29 psytux kernel: [    1.013822] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
Feb 24 12:41:29 psytux kernel: [    1.013824] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 24 12:41:29 psytux kernel: [    1.013825] usb usb7: Product: UHCI Host Controller
Feb 24 12:41:29 psytux kernel: [    1.013827] usb usb7: Manufacturer: Linux 2.6.30-2-amd64 uhci_hcd
Feb 24 12:41:29 psytux kernel: [    1.013829] usb usb7: SerialNumber: 0000:00:1d.1
Feb 24 12:41:29 psytux kernel: [    1.013865] usb usb7: configuration #1 chosen from 1 choice
Feb 24 12:41:29 psytux kernel: [    1.013889] hub 7-0:1.0: USB hub found
Feb 24 12:41:29 psytux kernel: [    1.013895] hub 7-0:1.0: 2 ports detected
Feb 24 12:41:29 psytux kernel: [    1.014078] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Feb 24 12:41:29 psytux kernel: [    1.014096] uhci_hcd 0000:00:1d.2: setting latency timer to 64
Feb 24 12:41:29 psytux kernel: [    1.014105] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Feb 24 12:41:29 psytux kernel: [    1.014146] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
Feb 24 12:41:29 psytux kernel: [    1.014187] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006020
Feb 24 12:41:29 psytux kernel: [    1.014227] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
Feb 24 12:41:29 psytux kernel: [    1.014229] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 24 12:41:29 psytux kernel: [    1.014231] usb usb8: Product: UHCI Host Controller
Feb 24 12:41:29 psytux kernel: [    1.014233] usb usb8: Manufacturer: Linux 2.6.30-2-amd64 uhci_hcd
Feb 24 12:41:29 psytux kernel: [    1.014234] usb usb8: SerialNumber: 0000:00:1d.2
Feb 24 12:41:29 psytux kernel: [    1.014271] usb usb8: configuration #1 chosen from 1 choice
Feb 24 12:41:29 psytux kernel: [    1.014294] hub 8-0:1.0: USB hub found
Feb 24 12:41:29 psytux kernel: [    1.014300] hub 8-0:1.0: 2 ports detected
Feb 24 12:41:29 psytux kernel: [    1.045271] eth0: Tigon3 [partno(BCM95751) rev b002] (PCI Express) MAC address 00:22:64:67:56:30
Feb 24 12:41:29 psytux kernel: [    1.045274] eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1])
Feb 24 12:41:29 psytux kernel: [    1.045276] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
Feb 24 12:41:29 psytux kernel: [    1.045278] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
Feb 24 12:41:29 psytux kernel: [    1.052006] firewire_ohci: Added fw-ohci device 0000:86:02.0, OHCI version 1.0
Feb 24 12:41:29 psytux kernel: [    1.328019] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Feb 24 12:41:29 psytux kernel: [    1.328590] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
Feb 24 12:41:29 psytux kernel: [    1.328595] ata1.00: ATA-8: FUJITSU MHZ2250BH G2, 8909, max UDMA/100
Feb 24 12:41:29 psytux kernel: [    1.328598] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
Feb 24 12:41:29 psytux kernel: [    1.329291] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
Feb 24 12:41:29 psytux kernel: [    1.329314] ata1.00: configured for UDMA/100
Feb 24 12:41:29 psytux kernel: [    1.344096] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHZ2250B 8909 PQ: 0 ANSI: 5
Feb 24 12:41:29 psytux kernel: [    1.516508] usb 1-5: new high speed USB device using ehci_hcd and address 4
Feb 24 12:41:29 psytux kernel: [    1.552049] firewire_core: created device fw0: GUID 5566779911223355, S400
Feb 24 12:41:29 psytux kernel: [    1.686820] usb 1-5: New USB device found, idVendor=04f2, idProduct=b059
Feb 24 12:41:29 psytux kernel: [    1.686823] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
Feb 24 12:41:29 psytux kernel: [    1.686825] usb 1-5: Product: CKF7037
Feb 24 12:41:29 psytux kernel: [    1.686826] usb 1-5: Manufacturer: Chicony Electronics Co., Ltd.
Feb 24 12:41:29 psytux kernel: [    1.686828] usb 1-5: SerialNumber: SN0001
Feb 24 12:41:29 psytux kernel: [    1.686875] usb 1-5: configuration #1 chosen from 1 choice
Feb 24 12:41:29 psytux kernel: [    1.936007] usb 3-1: new full speed USB device using uhci_hcd and address 2
Feb 24 12:41:29 psytux kernel: [    2.068519] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Feb 24 12:41:29 psytux kernel: [    2.081691] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
Feb 24 12:41:29 psytux kernel: [    2.081695] ata2.00: ATAPI: Optiarc DVD RW AD-7561S, AH03, max UDMA/100
Feb 24 12:41:29 psytux kernel: [    2.095477] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
Feb 24 12:41:29 psytux kernel: [    2.095500] ata2.00: configured for UDMA/100
Feb 24 12:41:29 psytux kernel: [    2.108940] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7561S  AH03 PQ: 0 ANSI: 5
Feb 24 12:41:29 psytux kernel: [    2.116028] usb 3-1: New USB device found, idVendor=03f0, idProduct=171d
Feb 24 12:41:29 psytux kernel: [    2.116030] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Feb 24 12:41:29 psytux kernel: [    2.116032] usb 3-1: Product: HP Integrated Module
Feb 24 12:41:29 psytux kernel: [    2.116034] usb 3-1: Manufacturer: Broadcom Corp
Feb 24 12:41:29 psytux kernel: [    2.116079] usb 3-1: configuration #1 chosen from 1 choice
Feb 24 12:41:29 psytux kernel: [    2.356514] usb 4-1: new full speed USB device using uhci_hcd and address 2
Feb 24 12:41:29 psytux kernel: [    2.428017] ata6: SATA link down (SStatus 0 SControl 300)
Feb 24 12:41:29 psytux kernel: [    2.448936] Driver 'sd' needs updating - please use bus_type methods
Feb 24 12:41:29 psytux kernel: [    2.449050] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
Feb 24 12:41:29 psytux kernel: [    2.449062] sd 0:0:0:0: [sda] Write Protect is off
Feb 24 12:41:29 psytux kernel: [    2.449065] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Feb 24 12:41:29 psytux kernel: [    2.449083] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Feb 24 12:41:29 psytux kernel: [    2.449164]  sda: sda1 sda2
Feb 24 12:41:29 psytux kernel: [    2.474042] sd 0:0:0:0: [sda] Attached SCSI disk
Feb 24 12:41:29 psytux kernel: [    2.475737] Driver 'sr' needs updating - please use bus_type methods
Feb 24 12:41:29 psytux kernel: [    2.480948] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Feb 24 12:41:29 psytux kernel: [    2.480952] Uniform CD-ROM driver Revision: 3.20
Feb 24 12:41:29 psytux kernel: [    2.481029] sr 1:0:0:0: Attached scsi CD-ROM sr0
Feb 24 12:41:29 psytux kernel: [    2.483941] sd 0:0:0:0: Attached scsi generic sg0 type 0
Feb 24 12:41:29 psytux kernel: [    2.483971] sr 1:0:0:0: Attached scsi generic sg1 type 5
Feb 24 12:41:29 psytux kernel: [    2.532716] usb 4-1: New USB device found, idVendor=08ff, idProduct=2810
Feb 24 12:41:29 psytux kernel: [    2.532718] usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Feb 24 12:41:29 psytux kernel: [    2.532721] usb 4-1: Product: Fingerprint Sensor
Feb 24 12:41:29 psytux kernel: [    2.532781] usb 4-1: configuration #1 chosen from 1 choice
Feb 24 12:41:29 psytux kernel: [    2.682477] device-mapper: uevent: version 1.0.3
Feb 24 12:41:29 psytux kernel: [    2.682637] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
Feb 24 12:41:29 psytux kernel: [   28.575502] Intel AES-NI instructions are not detected.
Feb 24 12:41:29 psytux kernel: [   29.279279] PM: Starting manual resume from disk
Feb 24 12:41:29 psytux kernel: [   29.333870] kjournald starting.  Commit interval 5 seconds
Feb 24 12:41:29 psytux kernel: [   29.333906] EXT3-fs: mounted filesystem with ordered data mode.
Feb 24 12:41:29 psytux kernel: [   31.639569] udev: starting version 151
Feb 24 12:41:29 psytux kernel: [   32.276611] ACPI: AC Adapter [AC] (off-line)
Feb 24 12:41:29 psytux kernel: [   32.321543] ACPI: SSDT 000000007b9c8c18 00275 (v01  PmRef  Cpu0Ist 00003000 INTL 20060912)
Feb 24 12:41:29 psytux kernel: [   32.322089] ACPI: SSDT 000000007b9c6618 0057B (v01  PmRef  Cpu0Cst 00003001 INTL 20060912)
Feb 24 12:41:29 psytux kernel: [   32.324532] ACPI Warning (processor_throttling-0844): Invalid throttling state, reset [20090320]
Feb 24 12:41:29 psytux kernel: [   32.326726] Monitor-Mwait will be used to enter C-1 state
Feb 24 12:41:29 psytux kernel: [   32.327437] Monitor-Mwait will be used to enter C-2 state
Feb 24 12:41:29 psytux kernel: [   32.327535] Monitor-Mwait will be used to enter C-3 state
Feb 24 12:41:29 psytux kernel: [   32.327543] Marking TSC unstable due to TSC halts in idle
Feb 24 12:41:29 psytux kernel: [   32.327638] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
Feb 24 12:41:29 psytux kernel: [   32.327734] processor ACPI_CPU:00: registered as cooling_device6
Feb 24 12:41:29 psytux kernel: [   32.327765] ACPI: Processor [CPU0] (supports 8 throttling states)
Feb 24 12:41:29 psytux kernel: [   32.327853] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
Feb 24 12:41:29 psytux kernel: [   32.327920] ACPI: Power Button [PWRF]
Feb 24 12:41:29 psytux kernel: [   32.328577] ACPI: SSDT 000000007b9c7e18 001D7 (v01  PmRef    ApIst 00003000 INTL 20060912)
Feb 24 12:41:29 psytux kernel: [   32.329053] ACPI: SSDT 000000007b9c8f18 0008D (v01  PmRef    ApCst 00003000 INTL 20060912)
Feb 24 12:41:29 psytux kernel: [   32.329814] ACPI Warning (processor_throttling-0844): Invalid throttling state, reset [20090320]
Feb 24 12:41:29 psytux kernel: [   32.331445] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
Feb 24 12:41:29 psytux kernel: [   32.331511] processor ACPI_CPU:01: registered as cooling_device7
Feb 24 12:41:29 psytux kernel: [   32.331540] ACPI: Processor [CPU1] (supports 8 throttling states)
Feb 24 12:41:29 psytux kernel: [   32.408042] ACPI: Battery Slot [BAT0] (battery present)
Feb 24 12:41:29 psytux kernel: [   32.408162] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
Feb 24 12:41:29 psytux kernel: [   32.408232] ACPI: Sleep Button [SLPB]
Feb 24 12:41:29 psytux kernel: [   32.408905] ACPI: Battery Slot [BAT1] (battery absent)
Feb 24 12:41:29 psytux kernel: [   32.408993] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
Feb 24 12:41:29 psytux kernel: [   32.409158] ACPI: Lid Switch [LID]
Feb 24 12:41:29 psytux kernel: [   32.411529] ACPI: WMI: Mapper loaded
Feb 24 12:41:29 psytux kernel: [   32.451098] Bluetooth: Core ver 2.15
Feb 24 12:41:29 psytux kernel: [   32.454502] NET: Registered protocol family 31
Feb 24 12:41:29 psytux kernel: [   32.454527] Bluetooth: HCI device and connection manager initialized
Feb 24 12:41:29 psytux kernel: [   32.454558] Bluetooth: HCI socket layer initialized
Feb 24 12:41:29 psytux kernel: [   32.496100] cfg80211: Using static regulatory domain info
Feb 24 12:41:29 psytux kernel: [   32.496141] cfg80211: Regulatory domain: US
Feb 24 12:41:29 psytux kernel: [   32.496170] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Feb 24 12:41:29 psytux kernel: [   32.496213] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
Feb 24 12:41:29 psytux kernel: [   32.496240] 	(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Feb 24 12:41:29 psytux kernel: [   32.496267] 	(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Feb 24 12:41:29 psytux kernel: [   32.496296] 	(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Feb 24 12:41:29 psytux kernel: [   32.496324] 	(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Feb 24 12:41:29 psytux kernel: [   32.496351] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
Feb 24 12:41:29 psytux kernel: [   32.496383] cfg80211: Calling CRDA for country: US
Feb 24 12:41:29 psytux kernel: [   32.504801] parport_pc 00:0a: reported by Plug and Play ACPI
Feb 24 12:41:29 psytux kernel: [   32.504912] parport0: PC-style at 0x378 (0x778), irq 5 [PCSPP,TRISTATE]
Feb 24 12:41:29 psytux kernel: [   32.668340] tpm_inf_pnp 00:04: Found GTPM with ID IFX0102
Feb 24 12:41:29 psytux kernel: [   32.669902] tpm_inf_pnp 00:04: TPM found: config base 0xfe00, data base 0xfe80, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2)
Feb 24 12:41:29 psytux kernel: [   32.907845] Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04711/0xa00000
Feb 24 12:41:29 psytux kernel: [   32.927395] lis3lv02d: hardware type NC673x found.
Feb 24 12:41:29 psytux kernel: [   32.928345] Bluetooth: Generic Bluetooth USB driver ver 0.5
Feb 24 12:41:29 psytux kernel: [   32.928426] usbcore: registered new interface driver btusb
Feb 24 12:41:29 psytux kernel: [   32.933282] lis3lv02d: 1-byte sensor found
Feb 24 12:41:29 psytux kernel: [   32.945582] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6
Feb 24 12:41:29 psytux kernel: [   32.947274] lis3_init_device: irq 23
Feb 24 12:41:29 psytux kernel: [   32.948925] lis3: registering device
Feb 24 12:41:29 psytux kernel: [   32.950604] Registered led device: hp::hddprotect
Feb 24 12:41:29 psytux kernel: [   32.952231] lis3lv02d driver loaded.
Feb 24 12:41:29 psytux kernel: [   32.953087] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
Feb 24 12:41:29 psytux kernel: [   33.119460] Linux video capture interface: v2.00
Feb 24 12:41:29 psytux kernel: [   33.251109] uvcvideo: Found UVC 1.00 device CKF7037 (04f2:b059)
Feb 24 12:41:29 psytux kernel: [   33.269120] input: CKF7037 as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5:1.0/input/input8
Feb 24 12:41:29 psytux kernel: [   33.270824] usbcore: registered new interface driver uvcvideo
Feb 24 12:41:29 psytux kernel: [   33.272453] USB Video Class driver (v0.1.0)
Feb 24 12:41:29 psytux kernel: [   33.529882] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
Feb 24 12:41:29 psytux kernel: [   33.531597] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Feb 24 12:41:29 psytux kernel: [   33.533341] HDA Intel 0000:00:1b.0: setting latency timer to 64
Feb 24 12:41:29 psytux kernel: [   33.540040] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
Feb 24 12:41:29 psytux kernel: [   33.541676] iwlagn: Copyright(c) 2003-2009 Intel Corporation
Feb 24 12:41:29 psytux kernel: [   33.543489] iwlagn 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Feb 24 12:41:29 psytux kernel: [   33.545184] iwlagn 0000:02:00.0: setting latency timer to 64
Feb 24 12:41:29 psytux kernel: [   33.545207] iwlagn 0000:02:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
Feb 24 12:41:29 psytux kernel: [   33.573046] iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
Feb 24 12:41:29 psytux kernel: [   33.574724]   alloc irq_desc for 31 on cpu 0 node 0
Feb 24 12:41:29 psytux kernel: [   33.574726]   alloc kstat_irqs on cpu 0 node 0
Feb 24 12:41:29 psytux kernel: [   33.574750] iwlagn 0000:02:00.0: irq 31 for MSI/MSI-X
Feb 24 12:41:29 psytux kernel: [   33.660696] phy0: Selected rate control algorithm 'iwl-agn-rs'
Feb 24 12:41:29 psytux kernel: [   34.053905] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
Feb 24 12:41:29 psytux kernel: [   35.096542] hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x011f0900
Feb 24 12:41:29 psytux kernel: [   36.600525] EXT3 FS on dm-1, internal journal
Feb 24 12:41:29 psytux kernel: [   36.934736] loop: module loaded
Feb 24 12:41:29 psytux kernel: [   36.950960] input: HP WMI hotkeys as /devices/virtual/input/input10
Feb 24 12:41:29 psytux kernel: [   40.060115] kjournald starting.  Commit interval 5 seconds
Feb 24 12:41:29 psytux kernel: [   40.060523] EXT3 FS on sda1, internal journal
Feb 24 12:41:29 psytux kernel: [   40.060526] EXT3-fs: mounted filesystem with ordered data mode.
Feb 24 12:41:29 psytux kernel: [   40.153031] kjournald starting.  Commit interval 5 seconds
Feb 24 12:41:29 psytux kernel: [   40.155341] EXT3 FS on dm-3, internal journal
Feb 24 12:41:29 psytux kernel: [   40.157264] EXT3-fs: mounted filesystem with ordered data mode.
Feb 24 12:41:29 psytux kernel: [   40.185663] Adding 2097144k swap on /dev/mapper/psytux-swap_1.  Priority:-1 extents:1 across:2097144k 
Feb 24 12:41:29 psytux kernel: [   43.207140] fuse init (API version 7.11)
Feb 24 12:41:29 psytux kernel: [   43.419035] iwlagn 0000:02:00.0: firmware: requesting iwlwifi-5000-2.ucode
Feb 24 12:41:29 psytux kernel: [   43.620459] iwlagn 0000:02:00.0: loaded firmware version 8.24.2.12
Feb 24 12:41:29 psytux kernel: [   43.633263] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input11
Feb 24 12:41:29 psytux kernel: [   43.758663] Registered led device: iwl-phy0::radio
Feb 24 12:41:29 psytux kernel: [   43.760595] Registered led device: iwl-phy0::assoc
Feb 24 12:41:29 psytux kernel: [   43.762392] Registered led device: iwl-phy0::RX
Feb 24 12:41:29 psytux kernel: [   43.764185] Registered led device: iwl-phy0::TX
Feb 24 12:41:29 psytux kernel: [   43.800842] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Feb 24 12:41:29 psytux kernel: [   48.227221] wlan0: authenticate with AP 00:24:97:84:ce:33
Feb 24 12:41:29 psytux kernel: [   48.228709] wlan0: authenticated
Feb 24 12:41:29 psytux kernel: [   48.228717] wlan0: associate with AP 00:24:97:84:ce:33
Feb 24 12:41:29 psytux kernel: [   48.230472] wlan0: RX AssocResp from 00:24:97:84:ce:33 (capab=0x421 status=0 aid=4)
Feb 24 12:41:29 psytux kernel: [   48.230478] wlan0: associated
Feb 24 12:41:29 psytux kernel: [   48.232403] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Feb 24 12:41:29 psytux rsyslogd: [origin software="rsyslogd" swVersion="4.4.2" x-pid="2334" x-info="http://www.rsyslog.com";] (re)start
Feb 24 12:41:30 psytux acpid: starting up with netlink and the input layer
Feb 24 12:41:30 psytux acpid: skipping conf file /etc/acpi/events/.
Feb 24 12:41:30 psytux acpid: skipping conf file /etc/acpi/events/..
Feb 24 12:41:31 psytux dhclient: DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7
Feb 24 12:41:31 psytux /usr/sbin/cron[2411]: (CRON) INFO (pidfile fd = 3)
Feb 24 12:41:31 psytux dhclient: DHCPOFFER from 10.9.8.7
Feb 24 12:41:31 psytux dhclient: DHCPREQUEST on wlan0 to 255.255.255.255 port 67
Feb 24 12:41:31 psytux dhclient: DHCPACK from 10.9.8.7
Feb 24 12:41:31 psytux /usr/sbin/cron[2414]: (CRON) STARTUP (fork ok)
Feb 24 12:41:31 psytux /usr/sbin/cron[2414]: (CRON) INFO (Running @reboot jobs)
X.Org X Server 1.7.4
Release Date: 2010-01-08
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.4-dsa-amd64 x86_64 Debian
Current Operating System: Linux psytux 2.6.32-trunk-amd64 #1 SMP Sun Jan 10 22:40:40 UTC 2010 x86_64
Kernel command line: BOOT_IMAGE=//vmlinuz-2.6.32-trunk-amd64 root=/dev/mapper/psytux-root ro video=i915 quiet
Build Date: 20 January 2010  11:36:07PM
xorg-server 2:1.7.4-2 (buildd@brahms.debian.org) 
Current version of pixman: 0.16.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 24 12:35:08 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section.  Using the first Screen section.
(**) |-->Screen "screen0" (0)
(**) |   |-->Monitor "<default monitor>"
(==) No device specified for screen "screen0".
	Using the first device section listed.
(**) |   |-->Device "Configured Video Device"
(==) No monitor specified for screen "screen0".
	Using a default monitor configuration.
(**) Option "DontZap" "no"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
	Entry deleted from font path.
(WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x7c1600
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 6.0
	X.Org XInput driver : 7.0
	X.Org Server Extension : 2.0
(--) using VT number 7

(--) PCI:*(0:0:2:0) 8086:2a42:103c:30dd Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0x98000000/4194304, 0x80000000/268435456, I/O @ 0x000060f0/8
(--) PCI: (0:0:2:1) 8086:2a43:103c:30dd Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0x98400000/1048576
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.7.4, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.7.4, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.7.4, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.7.4, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.7.4, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.7.4, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
	compiled for 1.7.3.902, module version = 2.9.1
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 6.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) Primary Device is: PCI 00@00:02:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
(--) intel(0): Chipset: "GM45"
(II) intel(0): Output VGA1 has no monitor section
(II) intel(0): Output LVDS1 has no monitor section
(II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
(II) intel(0): Output HDMI1 has no monitor section
(II) intel(0): Output DP1 has no monitor section
(II) intel(0): Output DP2 has no monitor section
(II) intel(0): Output TV1 has no monitor section
(II) intel(0): EDID for output VGA1
(II) intel(0): EDID for output LVDS1
(II) intel(0): Manufacturer: CMO  Model: 1520  Serial#: 0
(II) intel(0): Year: 1990  Week: 0
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 33  vert.: 20
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.626 redY: 0.354   greenX: 0.294 greenY: 0.589
(II) intel(0): blueX: 0.144 blueY: 0.097   whiteX: 0.309 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 131.5 MHz   Image Size:  331 x 207 mm
(II) intel(0): h_active: 1680  h_sync: 1771  h_sync_end 1831 h_blank_end 1978 h_border: 0
(II) intel(0): v_active: 1050  v_sync: 1056  v_sync_end 1068 v_blanking: 1108 v_border: 0
(II) intel(0):  N154Z1-L01
(II) intel(0):  CMO
(II) intel(0):  N154Z1-L01
(II) intel(0): EDID (in hex):
(II) intel(0): 	00ffffffffffff000daf201500000000
(II) intel(0): 	00000103802114780a77f1a05a4b9624
(II) intel(0): 	184f5400000001010101010101010101
(II) intel(0): 	0101010101015e33902a611a3a405b3c
(II) intel(0): 	6c004bcf10000018000000fe004e3135
(II) intel(0): 	345a312d4c30310a2020000000fe0043
(II) intel(0): 	4d4f0a202020202020202020000000fe
(II) intel(0): 	004e3135345a312d4c30310a202000f2
(II) intel(0): Not using default mode "640x350" (vrefresh out of range)
(II) intel(0): Not using default mode "320x175" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x400" (vrefresh out of range)
(II) intel(0): Not using default mode "320x200" (doublescan mode not supported)
(II) intel(0): Not using default mode "720x400" (vrefresh out of range)
(II) intel(0): Not using default mode "360x200" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (interlace mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x960" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1792x1344" (height too large for virtual size)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "1792x1344" (height too large for virtual size)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "1856x1392" (height too large for virtual size)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "1856x1392" (height too large for virtual size)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "832x624" (vrefresh out of range)
(II) intel(0): Not using default mode "416x312" (doublescan mode not supported)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1080" (height too large for virtual size)
(II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Printing probed modes for output LVDS1
(II) intel(0): Modeline "1680x1050"x60.0  131.50  1680 1771 1831 1978  1050 1056 1068 1108 -hsync -vsync (66.5 kHz)
(II) intel(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "1600x1024"x60.2  103.12  1600 1600 1656 1664  1024 1024 1029 1030 +hsync +vsync (62.0 kHz)
(II) intel(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz)
(II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
(II) intel(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz)
(II) intel(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): EDID for output HDMI1
(II) intel(0): EDID for output DP1
(II) intel(0): EDID for output DP2
(II) intel(0): EDID for output TV1
(II) intel(0): Output VGA1 disconnected
(II) intel(0): Output LVDS1 connected
(II) intel(0): Output HDMI1 disconnected
(II) intel(0): Output DP1 disconnected
(II) intel(0): Output DP2 disconnected
(II) intel(0): Output TV1 disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS1 using initial mode 1680x1050
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.7.4, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Kernel mode setting active, disabling FBC.
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) UXA(0): Driver registered support for the following operations:
(II)         solid
(II)         copy
(II)         composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): No memory allocations
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 444 x 277
(II) intel(0): Allocate new frame buffer 1680x1050 stride 1792
(II) config/udev: Adding input device "Power Button" (/dev/input/event4)
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.7.3.902, module version = 2.3.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 7.0
(**) "Power Button": always reports core events
(**) "Power Button": Device: "/dev/input/event4"
(II) "Power Button": Found keys
(II) "Power Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Power Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "Video Bus" (/dev/input/event5)
(**) "Video Bus": always reports core events
(**) "Video Bus": Device: "/dev/input/event5"
(II) "Video Bus": Found keys
(II) "Video Bus": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Video Bus"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "Sleep Button" (/dev/input/event2)
(**) "Sleep Button": always reports core events
(**) "Sleep Button": Device: "/dev/input/event2"
(II) "Sleep Button": Found keys
(II) "Sleep Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Sleep Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "CKF7037" (/dev/input/event7)
(**) "CKF7037": always reports core events
(**) "CKF7037": Device: "/dev/input/event7"
(II) "CKF7037": Found keys
(II) "CKF7037": Configuring as keyboard
(II) XINPUT: Adding extended input device ""CKF7037"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "AT Translated Set 2 keyboard" (/dev/input/event1)
(**) "AT Translated Set 2 keyboard": always reports core events
(**) "AT Translated Set 2 keyboard": Device: "/dev/input/event1"
(II) "AT Translated Set 2 keyboard": Found keys
(II) "AT Translated Set 2 keyboard": Configuring as keyboard
(II) XINPUT: Adding extended input device ""AT Translated Set 2 keyboard"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "SynPS/2 Synaptics TouchPad" (/dev/input/event8)
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
	compiled for 1.7.3.902, module version = 1.2.1
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 7.0
(II) Synaptics touchpad driver version 1.2.1
(**) Option "Device" "/dev/input/event8"
(II) "SynPS/2 Synaptics TouchPad": x-axis range 1472 - 5472
(II) "SynPS/2 Synaptics TouchPad": y-axis range 1408 - 4448
(II) "SynPS/2 Synaptics TouchPad": pressure range 0 - 255
(II) "SynPS/2 Synaptics TouchPad": finger width range 0 - 0
(II) "SynPS/2 Synaptics TouchPad": buttons: left right middle
(--) "SynPS/2 Synaptics TouchPad": touchpad found
(**) "SynPS/2 Synaptics TouchPad": always reports core events
(II) XINPUT: Adding extended input device ""SynPS/2 Synaptics TouchPad"" (type: TOUCHPAD)
(**) "SynPS/2 Synaptics TouchPad": (accel) keeping acceleration scheme 1
(**) "SynPS/2 Synaptics TouchPad": (accel) acceleration profile 0
(--) "SynPS/2 Synaptics TouchPad": touchpad found
(II) config/udev: Adding input device "SynPS/2 Synaptics TouchPad" (/dev/input/mouse1)
(**) "SynPS/2 Synaptics TouchPad": always reports core events
(**) "SynPS/2 Synaptics TouchPad": Device: "/dev/input/mouse1"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""SynPS/2 Synaptics TouchPad""
(II) config/udev: Adding input device "Macintosh mouse button emulation" (/dev/input/event0)
(**) "Macintosh mouse button emulation": always reports core events
(**) "Macintosh mouse button emulation": Device: "/dev/input/event0"
(II) "Macintosh mouse button emulation": Found 3 mouse buttons
(II) "Macintosh mouse button emulation": Found relative axes
(II) "Macintosh mouse button emulation": Found x and y relative axes
(II) "Macintosh mouse button emulation": Configuring as mouse
(**) "Macintosh mouse button emulation": YAxisMapping: buttons 4 and 5
(**) "Macintosh mouse button emulation": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Macintosh mouse button emulation"" (type: MOUSE)
(**) "Macintosh mouse button emulation": (accel) keeping acceleration scheme 1
(**) "Macintosh mouse button emulation": (accel) acceleration profile 0
(II) "Macintosh mouse button emulation": initialized for relative axes.
(II) config/udev: Adding input device "Macintosh mouse button emulation" (/dev/input/mouse0)
(**) "Macintosh mouse button emulation": always reports core events
(**) "Macintosh mouse button emulation": Device: "/dev/input/mouse0"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""Macintosh mouse button emulation""
(II) config/udev: Adding input device "HP WMI hotkeys" (/dev/input/event10)
(**) "HP WMI hotkeys": always reports core events
(**) "HP WMI hotkeys": Device: "/dev/input/event10"
(II) "HP WMI hotkeys": Found keys
(II) "HP WMI hotkeys": Configuring as keyboard
(II) XINPUT: Adding extended input device ""HP WMI hotkeys"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "ACPI Virtual Keyboard Device" (/dev/input/event11)
(**) "ACPI Virtual Keyboard Device": always reports core events
(**) "ACPI Virtual Keyboard Device": Device: "/dev/input/event11"
(II) "ACPI Virtual Keyboard Device": Found keys
(II) "ACPI Virtual Keyboard Device": Configuring as keyboard
(II) XINPUT: Adding extended input device ""ACPI Virtual Keyboard Device"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): No memory allocations
(II) intel(0): EDID vendor "CMO", prod id 5408
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0  131.50  1680 1771 1831 1978  1050 1056 1068 1108 -hsync -vsync (66.5 kHz)
(--) "SynPS/2 Synaptics TouchPad": touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CKF7037": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "HP WMI hotkeys": Device reopened after 1 attempts.
(II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): No memory allocations
(II) intel(0): EDID vendor "CMO", prod id 5408
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0  131.50  1680 1771 1831 1978  1050 1056 1068 1108 -hsync -vsync (66.5 kHz)
(--) "SynPS/2 Synaptics TouchPad": touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CKF7037": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "HP WMI hotkeys": Device reopened after 1 attempts.
(II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.
(II) intel(0): EDID vendor "CMO", prod id 5408
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0  131.50  1680 1771 1831 1978  1050 1056 1068 1108 -hsync -vsync (66.5 kHz)
(II) intel(0): EDID vendor "CMO", prod id 5408
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0  131.50  1680 1771 1831 1978  1050 1056 1068 1108 -hsync -vsync (66.5 kHz)
(II) intel(0): EDID vendor "CMO", prod id 5408
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0  131.50  1680 1771 1831 1978  1050 1056 1068 1108 -hsync -vsync (66.5 kHz)
--- Xorg.0.log	2010-02-24 12:38:28.000000000 +0100
+++ Xorg.0.log.working	2010-02-24 12:42:41.000000000 +0100
@@ -3,8 +3,8 @@ X.Org X Server 1.7.4
 Release Date: 2010-01-08
 X Protocol Version 11, Revision 0
 Build Operating System: Linux 2.6.32.4-dsa-amd64 x86_64 Debian
-Current Operating System: Linux psytux 2.6.32-trunk-amd64 #1 SMP Sun Jan 10 22:40:40 UTC 2010 x86_64
-Kernel command line: BOOT_IMAGE=//vmlinuz-2.6.32-trunk-amd64 root=/dev/mapper/psytux-root ro video=i915 quiet
+Current Operating System: Linux psytux 2.6.30-2-amd64 #1 SMP Mon Dec 7 05:21:45 UTC 2009 x86_64
+Kernel command line: BOOT_IMAGE=//vmlinuz-2.6.30-2-amd64 root=/dev/mapper/psytux-root ro video=i915 quiet
 Build Date: 20 January 2010  11:36:07PM
 xorg-server 2:1.7.4-2 (buildd@brahms.debian.org) 
 Current version of pixman: 0.16.4
@@ -13,7 +13,7 @@ Current version of pixman: 0.16.4
 Markers: (--) probed, (**) from config file, (==) default setting,
 	(++) from command line, (!!) notice, (II) informational,
 	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
-(==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 24 12:35:08 2010
+(==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 24 12:41:49 2010
 (==) Using config file: "/etc/X11/xorg.conf"
 (==) No Layout section.  Using the first Screen section.
 (**) |-->Screen "screen0" (0)
@@ -115,27 +115,93 @@ Markers: (--) probed, (**) from config f
 	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
 	4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
 (II) Primary Device is: PCI 00@00:02:0
+(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
+(II) Loading sub module "vgahw"
+(II) LoadModule: "vgahw"
+(II) Loading /usr/lib/xorg/modules/libvgahw.so
+(II) Module vgahw: vendor="X.Org Foundation"
+	compiled for 1.7.4, module version = 0.1.0
+	ABI class: X.Org Video Driver, version 6.0
+(II) Loading sub module "ramdac"
+(II) LoadModule: "ramdac"
+(II) Module "ramdac" already built-in
 drmOpenDevice: node name is /dev/dri/card0
-drmOpenDevice: open result is 9, (OK)
+drmOpenDevice: open result is 8, (OK)
 drmOpenByBusid: Searching for BusID pci:0000:00:02.0
 drmOpenDevice: node name is /dev/dri/card0
-drmOpenDevice: open result is 9, (OK)
-drmOpenByBusid: drmOpenMinor returns 9
+drmOpenDevice: open result is 8, (OK)
+drmOpenByBusid: drmOpenMinor returns 8
 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
 (==) intel(0): Depth 24, (--) framebuffer bpp 32
 (==) intel(0): RGB weight 888
 (==) intel(0): Default visual is TrueColor
 (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
 (--) intel(0): Chipset: "GM45"
-(II) intel(0): Output VGA1 has no monitor section
-(II) intel(0): Output LVDS1 has no monitor section
-(II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
-(II) intel(0): Output HDMI1 has no monitor section
-(II) intel(0): Output DP1 has no monitor section
-(II) intel(0): Output DP2 has no monitor section
-(II) intel(0): Output TV1 has no monitor section
-(II) intel(0): EDID for output VGA1
-(II) intel(0): EDID for output LVDS1
+(--) intel(0): Linear framebuffer at 0x80000000
+(--) intel(0): IO registers at addr 0x98000000 size 4194304
+(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
+(II) intel(0): No SDVO device is found in VBT
+(II) intel(0): 2 display pipes available.
+(II) Loading sub module "ddc"
+(II) LoadModule: "ddc"
+(II) Module "ddc" already built-in
+(II) Loading sub module "i2c"
+(II) LoadModule: "i2c"
+(II) Module "i2c" already built-in
+(II) intel(0): Output VGA has no monitor section
+(II) intel(0): Output LVDS has no monitor section
+(II) intel(0): I2C bus "LVDSDDC_C" initialized.
+(II) intel(0): Attempting to determine panel fixed mode.
+(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
+(II) intel(0): EDID for output LVDS
+(II) intel(0): Manufacturer: CMO  Model: 1520  Serial#: 0
+(II) intel(0): Year: 1990  Week: 0
+(II) intel(0): EDID Version: 1.3
+(II) intel(0): Digital Display Input
+(II) intel(0): Max Image Size [cm]: horiz.: 33  vert.: 20
+(II) intel(0): Gamma: 2.20
+(II) intel(0): No DPMS capabilities specified
+(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
+(II) intel(0): First detailed timing is preferred mode
+(II) intel(0): redX: 0.626 redY: 0.354   greenX: 0.294 greenY: 0.589
+(II) intel(0): blueX: 0.144 blueY: 0.097   whiteX: 0.309 whiteY: 0.329
+(II) intel(0): Manufacturer's mask: 0
+(II) intel(0): Supported detailed timing:
+(II) intel(0): clock: 131.5 MHz   Image Size:  331 x 207 mm
+(II) intel(0): h_active: 1680  h_sync: 1771  h_sync_end 1831 h_blank_end 1978 h_border: 0
+(II) intel(0): v_active: 1050  v_sync: 1056  v_sync_end 1068 v_blanking: 1108 v_border: 0
+(II) intel(0):  N154Z1-L01
+(II) intel(0):  CMO
+(II) intel(0):  N154Z1-L01
+(II) intel(0): EDID (in hex):
+(II) intel(0): 	00ffffffffffff000daf201500000000
+(II) intel(0): 	00000103802114780a77f1a05a4b9624
+(II) intel(0): 	184f5400000001010101010101010101
+(II) intel(0): 	0101010101015e33902a611a3a405b3c
+(II) intel(0): 	6c004bcf10000018000000fe004e3135
+(II) intel(0): 	345a312d4c30310a2020000000fe0043
+(II) intel(0): 	4d4f0a202020202020202020000000fe
+(II) intel(0): 	004e3135345a312d4c30310a202000f2
+(II) intel(0): EDID vendor "CMO", prod id 5408
+(II) intel(0): found backlight control method /sys/class/backlight/acpi_video0
+xf86TokenToOptinfo: table is NULL
+(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
+(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
+(II) intel(0): No SDVO device found on SDVOB
+(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
+(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
+(II) intel(0): Output HDMI-1 has no monitor section
+(II) intel(0): I2C bus "HDMIDDC_B" initialized.
+(II) intel(0): HDMI output 1 detected
+xf86TokenToOptinfo: table is NULL
+(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
+(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
+(II) intel(0): No SDVO device found on SDVOC
+(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
+(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
+(II) intel(0): Output TV has no monitor section
+(II) intel(0): EDID for output VGA
+(II) intel(0): EDID for output LVDS
 (II) intel(0): Manufacturer: CMO  Model: 1520  Serial#: 0
 (II) intel(0): Year: 1990  Week: 0
 (II) intel(0): EDID Version: 1.3
@@ -145,6 +211,7 @@ drmOpenByBusid: drmGetBusid reports pci:
 (II) intel(0): No DPMS capabilities specified
 (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
 (II) intel(0): First detailed timing is preferred mode
+(II) intel(0): GTF timings supported
 (II) intel(0): redX: 0.626 redY: 0.354   greenX: 0.294 greenY: 0.589
 (II) intel(0): blueX: 0.144 blueY: 0.097   whiteX: 0.309 whiteY: 0.329
 (II) intel(0): Manufacturer's mask: 0
@@ -164,6 +231,7 @@ drmOpenByBusid: drmGetBusid reports pci:
 (II) intel(0): 	345a312d4c30310a2020000000fe0043
 (II) intel(0): 	4d4f0a202020202020202020000000fe
 (II) intel(0): 	004e3135345a312d4c30310a202000f2
+(II) intel(0): EDID vendor "CMO", prod id 5408
 (II) intel(0): Not using default mode "640x350" (vrefresh out of range)
 (II) intel(0): Not using default mode "320x175" (doublescan mode not supported)
 (II) intel(0): Not using default mode "640x400" (vrefresh out of range)
@@ -273,7 +341,7 @@ drmOpenByBusid: drmGetBusid reports pci:
 (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
 (II) intel(0): Not using default mode "2048x1536" (height too large for virtual size)
 (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
-(II) intel(0): Printing probed modes for output LVDS1
+(II) intel(0): Printing probed modes for output LVDS
 (II) intel(0): Modeline "1680x1050"x60.0  131.50  1680 1771 1831 1978  1050 1056 1068 1108 -hsync -vsync (66.5 kHz)
 (II) intel(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
 (II) intel(0): Modeline "1600x1024"x60.2  103.12  1600 1600 1656 1664  1024 1024 1029 1030 +hsync +vsync (62.0 kHz)
@@ -286,19 +354,17 @@ drmOpenByBusid: drmGetBusid reports pci:
 (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
 (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
 (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
-(II) intel(0): EDID for output HDMI1
-(II) intel(0): EDID for output DP1
-(II) intel(0): EDID for output DP2
-(II) intel(0): EDID for output TV1
-(II) intel(0): Output VGA1 disconnected
-(II) intel(0): Output LVDS1 connected
-(II) intel(0): Output HDMI1 disconnected
-(II) intel(0): Output DP1 disconnected
-(II) intel(0): Output DP2 disconnected
-(II) intel(0): Output TV1 disconnected
+(II) intel(0): EDID for output HDMI-1
+(II) intel(0): EDID for output TV
+(II) intel(0): Output VGA disconnected
+(II) intel(0): Output LVDS connected
+(II) intel(0): Output HDMI-1 disconnected
+(II) intel(0): Output TV disconnected
 (II) intel(0): Using exact sizes for initial modes
-(II) intel(0): Output LVDS1 using initial mode 1680x1050
+(II) intel(0): Output LVDS using initial mode 1680x1050
 (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
+(II) intel(0): detected 512 kB GTT.
+(II) intel(0): detected 65532 kB stolen memory.
 (==) intel(0): video overlay key set to 0x101fe
 (==) intel(0): DPI set to (96, 96)
 (II) Loading sub module "fb"
@@ -307,15 +373,30 @@ drmOpenByBusid: drmGetBusid reports pci:
 (II) Module fb: vendor="X.Org Foundation"
 	compiled for 1.7.4, module version = 1.0.0
 	ABI class: X.Org ANSI C Emulation, version 0.4
+(II) intel(0): Comparing regs from server start up to After PreInit
+(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
+(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
+(WW) intel(0): PP_STATUS after: on, ready, sequencing on
+(WW) intel(0): Register 0x61110 (PORT_HOTPLUG_EN) changed from 0x00000120 to 0x20000120
+(WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x200c00c0 to 0x000c00c0
+(WW) intel(0): Register 0x68020 (TV_CSC_V) changed from 0x0341030c to 0x0340030c
+(WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x8000085a to 0x8000085e
+(WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x0000fa5a to 0x00028283
+(WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00007d2d to 0x00014141
+(WW) intel(0): Register 0x68100 (TV_H_LUMA_0) changed from 0x32c03000 to 0xb1403000
+(WW) intel(0): Register 0x681ec (TV_H_LUMA_59) changed from 0x00003060 to 0x0000b060
+(WW) intel(0): Register 0x321b (FBC_FENCE_OFF) changed from 0x00010600 to 0xa4024800
 (==) Depth 24 pixmap format is 32 bpp
+(II) intel(0): Kernel reported 474624 total, 1 used
+(II) intel(0): I830CheckAvailableMemory: 1898492 kB available
 (II) intel(0): [DRI2] Setup complete
-(**) intel(0): Kernel mode setting active, disabling FBC.
-(**) intel(0): Framebuffer compression disabled
+(**) intel(0): Framebuffer compression enabled
 (**) intel(0): Tiling enabled
 (**) intel(0): SwapBuffers wait enabled
 (==) intel(0): VideoRam: 262144 KB
 (II) intel(0): Attempting memory allocation with tiled buffers.
 (II) intel(0): Tiled allocation successful.
+(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
 (II) UXA(0): Driver registered support for the following operations:
 (II)         solid
 (II)         copy
@@ -323,7 +404,33 @@ drmOpenByBusid: drmGetBusid reports pci:
 (==) intel(0): Backing store disabled
 (==) intel(0): Silken mouse enabled
 (II) intel(0): Initializing HW Cursor
-(II) intel(0): No memory allocations
+(II) intel(0): Disable render standby.
+(II) intel(0): Fixed memory allocation layout:
+(II) intel(0): 0x00000000-0x001d0fff: compressed frame buffer (1860 kB, 0x000000007c000000 physical
+)
+(II) intel(0): 0x001d1000-0x001d1fff: power context (4 kB)
+(II) intel(0): 0x03fff000:            end of stolen memory
+(II) intel(0): 0x03fff000-0x0f9fefff: DRI memory manager (190464 kB)
+(II) intel(0): 0x10000000:            end of aperture
+(II) intel(0): BO memory allocation layout:
+(II) intel(0): 0x03fff000:            start of memory manager
+(II) intel(0): 0x04020000-0x04b67fff: front buffer (11552 kB) X tiled
+(II) intel(0): 0x05020000-0x05029fff: HW cursors (40 kB)
+(II) intel(0): 0x0f9ff000:            end of memory manager
+(WW) intel(0): ESR is 0x00000010, page table error
+(WW) intel(0): PGTBL_ER is 0x00100000, CS instruction GTT PTE
+(WW) intel(0): Existing errors found in hardware state.
+(II) intel(0): using SSC reference clock of 100 MHz
+(II) intel(0): Selecting standard 18 bit TMDS pixel format.
+(II) intel(0): Output configuration:
+(II) intel(0):   Pipe A is off
+(II) intel(0):   Display plane A is now disabled and connected to pipe A.
+(II) intel(0):   Pipe B is on
+(II) intel(0):   Display plane B is now enabled and connected to pipe B.
+(II) intel(0):   Output VGA is connected to pipe none
+(II) intel(0):   Output LVDS is connected to pipe B
+(II) intel(0):   Output HDMI-1 is connected to pipe none
+(II) intel(0):   Output TV is connected to pipe none
 (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
 (==) intel(0): DPMS enabled
 (==) intel(0): Intel XvMC decoder disabled
@@ -357,7 +464,8 @@ record: http://bugs.freedesktop.org/show
 (II) GLX: Initialized DRI2 GL provider for screen 0
 (II) intel(0): Setting screen physical size to 444 x 277
 (II) intel(0): Allocate new frame buffer 1680x1050 stride 1792
-(II) config/udev: Adding input device "Power Button" (/dev/input/event4)
+(II) intel(0): New front buffer at 0x5046000
+(II) config/udev: Adding input device "Power Button" (/dev/input/event3)
 (II) LoadModule: "evdev"
 (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
 (II) Module evdev: vendor="X.Org Foundation"
@@ -365,7 +473,7 @@ record: http://bugs.freedesktop.org/show
 	Module class: X.Org XInput Driver
 	ABI class: X.Org XInput driver, version 7.0
 (**) "Power Button": always reports core events
-(**) "Power Button": Device: "/dev/input/event4"
+(**) "Power Button": Device: "/dev/input/event3"
 (II) "Power Button": Found keys
 (II) "Power Button": Configuring as keyboard
 (II) XINPUT: Adding extended input device ""Power Button"" (type: KEYBOARD)
@@ -373,9 +481,9 @@ record: http://bugs.freedesktop.org/show
 (**) Option "xkb_model" "pc105"
 (**) Option "xkb_layout" "de"
 (**) Option "xkb_options" "lv3:ralt_switch"
-(II) config/udev: Adding input device "Video Bus" (/dev/input/event5)
+(II) config/udev: Adding input device "Video Bus" (/dev/input/event2)
 (**) "Video Bus": always reports core events
-(**) "Video Bus": Device: "/dev/input/event5"
+(**) "Video Bus": Device: "/dev/input/event2"
 (II) "Video Bus": Found keys
 (II) "Video Bus": Configuring as keyboard
 (II) XINPUT: Adding extended input device ""Video Bus"" (type: KEYBOARD)
@@ -383,9 +491,9 @@ record: http://bugs.freedesktop.org/show
 (**) Option "xkb_model" "pc105"
 (**) Option "xkb_layout" "de"
 (**) Option "xkb_options" "lv3:ralt_switch"
-(II) config/udev: Adding input device "Sleep Button" (/dev/input/event2)
+(II) config/udev: Adding input device "Sleep Button" (/dev/input/event4)
 (**) "Sleep Button": always reports core events
-(**) "Sleep Button": Device: "/dev/input/event2"
+(**) "Sleep Button": Device: "/dev/input/event4"
 (II) "Sleep Button": Found keys
 (II) "Sleep Button": Configuring as keyboard
 (II) XINPUT: Adding extended input device ""Sleep Button"" (type: KEYBOARD)
@@ -393,9 +501,9 @@ record: http://bugs.freedesktop.org/show
 (**) Option "xkb_model" "pc105"
 (**) Option "xkb_layout" "de"
 (**) Option "xkb_options" "lv3:ralt_switch"
-(II) config/udev: Adding input device "CKF7037" (/dev/input/event7)
+(II) config/udev: Adding input device "CKF7037" (/dev/input/event8)
 (**) "CKF7037": always reports core events
-(**) "CKF7037": Device: "/dev/input/event7"
+(**) "CKF7037": Device: "/dev/input/event8"
 (II) "CKF7037": Found keys
 (II) "CKF7037": Configuring as keyboard
 (II) XINPUT: Adding extended input device ""CKF7037"" (type: KEYBOARD)
@@ -413,7 +521,7 @@ record: http://bugs.freedesktop.org/show
 (**) Option "xkb_model" "pc105"
 (**) Option "xkb_layout" "de"
 (**) Option "xkb_options" "lv3:ralt_switch"
-(II) config/udev: Adding input device "SynPS/2 Synaptics TouchPad" (/dev/input/event8)
+(II) config/udev: Adding input device "SynPS/2 Synaptics TouchPad" (/dev/input/event7)
 (II) LoadModule: "synaptics"
 (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
 (II) Module synaptics: vendor="X.Org Foundation"
@@ -421,7 +529,7 @@ record: http://bugs.freedesktop.org/show
 	Module class: X.Org XInput Driver
 	ABI class: X.Org XInput driver, version 7.0
 (II) Synaptics touchpad driver version 1.2.1
-(**) Option "Device" "/dev/input/event8"
+(**) Option "Device" "/dev/input/event7"
 (II) "SynPS/2 Synaptics TouchPad": x-axis range 1472 - 5472
 (II) "SynPS/2 Synaptics TouchPad": y-axis range 1408 - 4448
 (II) "SynPS/2 Synaptics TouchPad": pressure range 0 - 255
@@ -481,26 +589,36 @@ record: http://bugs.freedesktop.org/show
 (II) AIGLX: Suspending AIGLX clients for VT switch
 (II) Open ACPI successful (/var/run/acpid.socket)
 (II) AIGLX: Resuming AIGLX clients after VT switch
-(II) intel(0): No memory allocations
+(II) intel(0): Fixed memory allocation layout:
+(II) intel(0): 0x00000000-0x001d0fff: compressed frame buffer (1860 kB, 0x000000007c000000 physical
+)
+(II) intel(0): 0x001d1000-0x001d1fff: power context (4 kB)
+(II) intel(0): 0x03fff000:            end of stolen memory
+(II) intel(0): 0x03fff000-0x0f9fefff: DRI memory manager (190464 kB)
+(II) intel(0): 0x10000000:            end of aperture
+(II) intel(0): BO memory allocation layout:
+(II) intel(0): 0x03fff000:            start of memory manager
+(II) intel(0): 0x04020000-0x0474dfff: front buffer (7352 kB) X tiled
+(II) intel(0): 0x04820000-0x04829fff: HW cursors (40 kB)
+(II) intel(0): 0x0f9ff000:            end of memory manager
+(WW) intel(0): ESR is 0x00000010, page table error
+(WW) intel(0): PGTBL_ER is 0x00100000, CS instruction GTT PTE
+(WW) intel(0): Existing errors found in hardware state.
+(II) intel(0): using SSC reference clock of 100 MHz
+(II) intel(0): Selecting standard 18 bit TMDS pixel format.
+(II) intel(0): Output configuration:
+(II) intel(0):   Pipe A is off
+(II) intel(0):   Display plane A is now disabled and connected to pipe A.
+(II) intel(0):   Pipe B is on
+(II) intel(0):   Display plane B is now enabled and connected to pipe B.
+(II) intel(0):   Output VGA is connected to pipe none
+(II) intel(0):   Output LVDS is connected to pipe B
+(II) intel(0):   Output HDMI-1 is connected to pipe none
+(II) intel(0):   Output TV is connected to pipe none
 (II) intel(0): EDID vendor "CMO", prod id 5408
 (II) intel(0): Printing DDC gathered Modelines:
 (II) intel(0): Modeline "1680x1050"x0.0  131.50  1680 1771 1831 1978  1050 1056 1068 1108 -hsync -vsync (66.5 kHz)
-(--) "SynPS/2 Synaptics TouchPad": touchpad found
-(II) "Power Button": Device reopened after 1 attempts.
-(II) "Video Bus": Device reopened after 1 attempts.
-(II) "Sleep Button": Device reopened after 1 attempts.
-(II) "CKF7037": Device reopened after 1 attempts.
-(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
-(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
-(II) "HP WMI hotkeys": Device reopened after 1 attempts.
-(II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.
-(II) AIGLX: Suspending AIGLX clients for VT switch
-(II) Open ACPI successful (/var/run/acpid.socket)
-(II) AIGLX: Resuming AIGLX clients after VT switch
-(II) intel(0): No memory allocations
 (II) intel(0): EDID vendor "CMO", prod id 5408
-(II) intel(0): Printing DDC gathered Modelines:
-(II) intel(0): Modeline "1680x1050"x0.0  131.50  1680 1771 1831 1978  1050 1056 1068 1108 -hsync -vsync (66.5 kHz)
 (--) "SynPS/2 Synaptics TouchPad": touchpad found
 (II) "Power Button": Device reopened after 1 attempts.
 (II) "Video Bus": Device reopened after 1 attempts.
@@ -510,12 +628,3 @@ record: http://bugs.freedesktop.org/show
 (II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
 (II) "HP WMI hotkeys": Device reopened after 1 attempts.
 (II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.
-(II) intel(0): EDID vendor "CMO", prod id 5408
-(II) intel(0): Printing DDC gathered Modelines:
-(II) intel(0): Modeline "1680x1050"x0.0  131.50  1680 1771 1831 1978  1050 1056 1068 1108 -hsync -vsync (66.5 kHz)
-(II) intel(0): EDID vendor "CMO", prod id 5408
-(II) intel(0): Printing DDC gathered Modelines:
-(II) intel(0): Modeline "1680x1050"x0.0  131.50  1680 1771 1831 1978  1050 1056 1068 1108 -hsync -vsync (66.5 kHz)
-(II) intel(0): EDID vendor "CMO", prod id 5408
-(II) intel(0): Printing DDC gathered Modelines:
-(II) intel(0): Modeline "1680x1050"x0.0  131.50  1680 1771 1831 1978  1050 1056 1068 1108 -hsync -vsync (66.5 kHz)
X.Org X Server 1.7.4
Release Date: 2010-01-08
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.4-dsa-amd64 x86_64 Debian
Current Operating System: Linux psytux 2.6.30-2-amd64 #1 SMP Mon Dec 7 05:21:45 UTC 2009 x86_64
Kernel command line: BOOT_IMAGE=//vmlinuz-2.6.30-2-amd64 root=/dev/mapper/psytux-root ro video=i915 quiet
Build Date: 20 January 2010  11:36:07PM
xorg-server 2:1.7.4-2 (buildd@brahms.debian.org) 
Current version of pixman: 0.16.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 24 12:41:49 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section.  Using the first Screen section.
(**) |-->Screen "screen0" (0)
(**) |   |-->Monitor "<default monitor>"
(==) No device specified for screen "screen0".
	Using the first device section listed.
(**) |   |-->Device "Configured Video Device"
(==) No monitor specified for screen "screen0".
	Using a default monitor configuration.
(**) Option "DontZap" "no"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
	Entry deleted from font path.
(WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x7c1600
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 6.0
	X.Org XInput driver : 7.0
	X.Org Server Extension : 2.0
(--) using VT number 7

(--) PCI:*(0:0:2:0) 8086:2a42:103c:30dd Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0x98000000/4194304, 0x80000000/268435456, I/O @ 0x000060f0/8
(--) PCI: (0:0:2:1) 8086:2a43:103c:30dd Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0x98400000/1048576
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.7.4, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.7.4, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.7.4, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.7.4, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.7.4, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.7.4, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
	compiled for 1.7.3.902, module version = 2.9.1
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 6.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) Primary Device is: PCI 00@00:02:0
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.7.4, module version = 0.1.0
	ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
(--) intel(0): Chipset: "GM45"
(--) intel(0): Linear framebuffer at 0x80000000
(--) intel(0): IO registers at addr 0x98000000 size 4194304
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(II) intel(0): No SDVO device is found in VBT
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA has no monitor section
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID for output LVDS
(II) intel(0): Manufacturer: CMO  Model: 1520  Serial#: 0
(II) intel(0): Year: 1990  Week: 0
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 33  vert.: 20
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.626 redY: 0.354   greenX: 0.294 greenY: 0.589
(II) intel(0): blueX: 0.144 blueY: 0.097   whiteX: 0.309 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 131.5 MHz   Image Size:  331 x 207 mm
(II) intel(0): h_active: 1680  h_sync: 1771  h_sync_end 1831 h_blank_end 1978 h_border: 0
(II) intel(0): v_active: 1050  v_sync: 1056  v_sync_end 1068 v_blanking: 1108 v_border: 0
(II) intel(0):  N154Z1-L01
(II) intel(0):  CMO
(II) intel(0):  N154Z1-L01
(II) intel(0): EDID (in hex):
(II) intel(0): 	00ffffffffffff000daf201500000000
(II) intel(0): 	00000103802114780a77f1a05a4b9624
(II) intel(0): 	184f5400000001010101010101010101
(II) intel(0): 	0101010101015e33902a611a3a405b3c
(II) intel(0): 	6c004bcf10000018000000fe004e3135
(II) intel(0): 	345a312d4c30310a2020000000fe0043
(II) intel(0): 	4d4f0a202020202020202020000000fe
(II) intel(0): 	004e3135345a312d4c30310a202000f2
(II) intel(0): EDID vendor "CMO", prod id 5408
(II) intel(0): found backlight control method /sys/class/backlight/acpi_video0
xf86TokenToOptinfo: table is NULL
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): Output HDMI-1 has no monitor section
(II) intel(0): I2C bus "HDMIDDC_B" initialized.
(II) intel(0): HDMI output 1 detected
xf86TokenToOptinfo: table is NULL
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output TV has no monitor section
(II) intel(0): EDID for output VGA
(II) intel(0): EDID for output LVDS
(II) intel(0): Manufacturer: CMO  Model: 1520  Serial#: 0
(II) intel(0): Year: 1990  Week: 0
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 33  vert.: 20
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): GTF timings supported
(II) intel(0): redX: 0.626 redY: 0.354   greenX: 0.294 greenY: 0.589
(II) intel(0): blueX: 0.144 blueY: 0.097   whiteX: 0.309 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 131.5 MHz   Image Size:  331 x 207 mm
(II) intel(0): h_active: 1680  h_sync: 1771  h_sync_end 1831 h_blank_end 1978 h_border: 0
(II) intel(0): v_active: 1050  v_sync: 1056  v_sync_end 1068 v_blanking: 1108 v_border: 0
(II) intel(0):  N154Z1-L01
(II) intel(0):  CMO
(II) intel(0):  N154Z1-L01
(II) intel(0): EDID (in hex):
(II) intel(0): 	00ffffffffffff000daf201500000000
(II) intel(0): 	00000103802114780a77f1a05a4b9624
(II) intel(0): 	184f5400000001010101010101010101
(II) intel(0): 	0101010101015e33902a611a3a405b3c
(II) intel(0): 	6c004bcf10000018000000fe004e3135
(II) intel(0): 	345a312d4c30310a2020000000fe0043
(II) intel(0): 	4d4f0a202020202020202020000000fe
(II) intel(0): 	004e3135345a312d4c30310a202000f2
(II) intel(0): EDID vendor "CMO", prod id 5408
(II) intel(0): Not using default mode "640x350" (vrefresh out of range)
(II) intel(0): Not using default mode "320x175" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x400" (vrefresh out of range)
(II) intel(0): Not using default mode "320x200" (doublescan mode not supported)
(II) intel(0): Not using default mode "720x400" (vrefresh out of range)
(II) intel(0): Not using default mode "360x200" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (interlace mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x960" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1792x1344" (height too large for virtual size)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "1792x1344" (height too large for virtual size)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "1856x1392" (height too large for virtual size)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "1856x1392" (height too large for virtual size)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "832x624" (vrefresh out of range)
(II) intel(0): Not using default mode "416x312" (doublescan mode not supported)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1080" (height too large for virtual size)
(II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Printing probed modes for output LVDS
(II) intel(0): Modeline "1680x1050"x60.0  131.50  1680 1771 1831 1978  1050 1056 1068 1108 -hsync -vsync (66.5 kHz)
(II) intel(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "1600x1024"x60.2  103.12  1600 1600 1656 1664  1024 1024 1029 1030 +hsync +vsync (62.0 kHz)
(II) intel(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz)
(II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
(II) intel(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz)
(II) intel(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): EDID for output HDMI-1
(II) intel(0): EDID for output TV
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output HDMI-1 disconnected
(II) intel(0): Output TV disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1680x1050
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) intel(0): detected 512 kB GTT.
(II) intel(0): detected 65532 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.7.4, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x61110 (PORT_HOTPLUG_EN) changed from 0x00000120 to 0x20000120
(WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x200c00c0 to 0x000c00c0
(WW) intel(0): Register 0x68020 (TV_CSC_V) changed from 0x0341030c to 0x0340030c
(WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x8000085a to 0x8000085e
(WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x0000fa5a to 0x00028283
(WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00007d2d to 0x00014141
(WW) intel(0): Register 0x68100 (TV_H_LUMA_0) changed from 0x32c03000 to 0xb1403000
(WW) intel(0): Register 0x681ec (TV_H_LUMA_59) changed from 0x00003060 to 0x0000b060
(WW) intel(0): Register 0x321b (FBC_FENCE_OFF) changed from 0x00010600 to 0xa4024800
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): Kernel reported 474624 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 1898492 kB available
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) UXA(0): Driver registered support for the following operations:
(II)         solid
(II)         copy
(II)         composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): Disable render standby.
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x001d0fff: compressed frame buffer (1860 kB, 0x000000007c000000 physical
)
(II) intel(0): 0x001d1000-0x001d1fff: power context (4 kB)
(II) intel(0): 0x03fff000:            end of stolen memory
(II) intel(0): 0x03fff000-0x0f9fefff: DRI memory manager (190464 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x03fff000:            start of memory manager
(II) intel(0): 0x04020000-0x04b67fff: front buffer (11552 kB) X tiled
(II) intel(0): 0x05020000-0x05029fff: HW cursors (40 kB)
(II) intel(0): 0x0f9ff000:            end of memory manager
(WW) intel(0): ESR is 0x00000010, page table error
(WW) intel(0): PGTBL_ER is 0x00100000, CS instruction GTT PTE
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output HDMI-1 is connected to pipe none
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 444 x 277
(II) intel(0): Allocate new frame buffer 1680x1050 stride 1792
(II) intel(0): New front buffer at 0x5046000
(II) config/udev: Adding input device "Power Button" (/dev/input/event3)
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.7.3.902, module version = 2.3.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 7.0
(**) "Power Button": always reports core events
(**) "Power Button": Device: "/dev/input/event3"
(II) "Power Button": Found keys
(II) "Power Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Power Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "Video Bus" (/dev/input/event2)
(**) "Video Bus": always reports core events
(**) "Video Bus": Device: "/dev/input/event2"
(II) "Video Bus": Found keys
(II) "Video Bus": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Video Bus"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "Sleep Button" (/dev/input/event4)
(**) "Sleep Button": always reports core events
(**) "Sleep Button": Device: "/dev/input/event4"
(II) "Sleep Button": Found keys
(II) "Sleep Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Sleep Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "CKF7037" (/dev/input/event8)
(**) "CKF7037": always reports core events
(**) "CKF7037": Device: "/dev/input/event8"
(II) "CKF7037": Found keys
(II) "CKF7037": Configuring as keyboard
(II) XINPUT: Adding extended input device ""CKF7037"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "AT Translated Set 2 keyboard" (/dev/input/event1)
(**) "AT Translated Set 2 keyboard": always reports core events
(**) "AT Translated Set 2 keyboard": Device: "/dev/input/event1"
(II) "AT Translated Set 2 keyboard": Found keys
(II) "AT Translated Set 2 keyboard": Configuring as keyboard
(II) XINPUT: Adding extended input device ""AT Translated Set 2 keyboard"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "SynPS/2 Synaptics TouchPad" (/dev/input/event7)
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
	compiled for 1.7.3.902, module version = 1.2.1
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 7.0
(II) Synaptics touchpad driver version 1.2.1
(**) Option "Device" "/dev/input/event7"
(II) "SynPS/2 Synaptics TouchPad": x-axis range 1472 - 5472
(II) "SynPS/2 Synaptics TouchPad": y-axis range 1408 - 4448
(II) "SynPS/2 Synaptics TouchPad": pressure range 0 - 255
(II) "SynPS/2 Synaptics TouchPad": finger width range 0 - 0
(II) "SynPS/2 Synaptics TouchPad": buttons: left right middle
(--) "SynPS/2 Synaptics TouchPad": touchpad found
(**) "SynPS/2 Synaptics TouchPad": always reports core events
(II) XINPUT: Adding extended input device ""SynPS/2 Synaptics TouchPad"" (type: TOUCHPAD)
(**) "SynPS/2 Synaptics TouchPad": (accel) keeping acceleration scheme 1
(**) "SynPS/2 Synaptics TouchPad": (accel) acceleration profile 0
(--) "SynPS/2 Synaptics TouchPad": touchpad found
(II) config/udev: Adding input device "SynPS/2 Synaptics TouchPad" (/dev/input/mouse1)
(**) "SynPS/2 Synaptics TouchPad": always reports core events
(**) "SynPS/2 Synaptics TouchPad": Device: "/dev/input/mouse1"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""SynPS/2 Synaptics TouchPad""
(II) config/udev: Adding input device "Macintosh mouse button emulation" (/dev/input/event0)
(**) "Macintosh mouse button emulation": always reports core events
(**) "Macintosh mouse button emulation": Device: "/dev/input/event0"
(II) "Macintosh mouse button emulation": Found 3 mouse buttons
(II) "Macintosh mouse button emulation": Found relative axes
(II) "Macintosh mouse button emulation": Found x and y relative axes
(II) "Macintosh mouse button emulation": Configuring as mouse
(**) "Macintosh mouse button emulation": YAxisMapping: buttons 4 and 5
(**) "Macintosh mouse button emulation": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Macintosh mouse button emulation"" (type: MOUSE)
(**) "Macintosh mouse button emulation": (accel) keeping acceleration scheme 1
(**) "Macintosh mouse button emulation": (accel) acceleration profile 0
(II) "Macintosh mouse button emulation": initialized for relative axes.
(II) config/udev: Adding input device "Macintosh mouse button emulation" (/dev/input/mouse0)
(**) "Macintosh mouse button emulation": always reports core events
(**) "Macintosh mouse button emulation": Device: "/dev/input/mouse0"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""Macintosh mouse button emulation""
(II) config/udev: Adding input device "HP WMI hotkeys" (/dev/input/event10)
(**) "HP WMI hotkeys": always reports core events
(**) "HP WMI hotkeys": Device: "/dev/input/event10"
(II) "HP WMI hotkeys": Found keys
(II) "HP WMI hotkeys": Configuring as keyboard
(II) XINPUT: Adding extended input device ""HP WMI hotkeys"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "ACPI Virtual Keyboard Device" (/dev/input/event11)
(**) "ACPI Virtual Keyboard Device": always reports core events
(**) "ACPI Virtual Keyboard Device": Device: "/dev/input/event11"
(II) "ACPI Virtual Keyboard Device": Found keys
(II) "ACPI Virtual Keyboard Device": Configuring as keyboard
(II) XINPUT: Adding extended input device ""ACPI Virtual Keyboard Device"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x001d0fff: compressed frame buffer (1860 kB, 0x000000007c000000 physical
)
(II) intel(0): 0x001d1000-0x001d1fff: power context (4 kB)
(II) intel(0): 0x03fff000:            end of stolen memory
(II) intel(0): 0x03fff000-0x0f9fefff: DRI memory manager (190464 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x03fff000:            start of memory manager
(II) intel(0): 0x04020000-0x0474dfff: front buffer (7352 kB) X tiled
(II) intel(0): 0x04820000-0x04829fff: HW cursors (40 kB)
(II) intel(0): 0x0f9ff000:            end of memory manager
(WW) intel(0): ESR is 0x00000010, page table error
(WW) intel(0): PGTBL_ER is 0x00100000, CS instruction GTT PTE
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output HDMI-1 is connected to pipe none
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): EDID vendor "CMO", prod id 5408
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0  131.50  1680 1771 1831 1978  1050 1056 1068 1108 -hsync -vsync (66.5 kHz)
(II) intel(0): EDID vendor "CMO", prod id 5408
(--) "SynPS/2 Synaptics TouchPad": touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CKF7037": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "HP WMI hotkeys": Device reopened after 1 attempts.
(II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.

Attachment: syslog.sig
Description: Binary data

Attachment: syslog.diff.sig
Description: Binary data

Attachment: syslog.working.sig
Description: Binary data

Attachment: Xorg.0.log.sig
Description: Binary data

Attachment: Xorg.0.log.diff.sig
Description: Binary data

Attachment: Xorg.0.log.working.sig
Description: Binary data


--- End Message ---
--- Begin Message ---
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256

Julien Cristau wrote:
> On Wed, Feb 24, 2010 at 12:58:54 +0100, Uli Schlachter wrote:
> 
>> Feb 24 12:34:40 psytux kernel: [    0.548357] vesafb: framebuffer at 0x80000000, mapped to 0xffffc90010980000, using 5120k, total 5120k
>> Feb 24 12:34:40 psytux kernel: [    0.548360] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
>> Feb 24 12:34:40 psytux kernel: [    0.548362] vesafb: scrolling: redraw
>> Feb 24 12:34:40 psytux kernel: [    0.548364] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>> Feb 24 12:34:40 psytux kernel: [    0.588241] Console: switching to colour frame buffer device 160x64
>> Feb 24 12:34:40 psytux kernel: [    0.628004] fb0: VESA VGA frame buffer device
> [...]
>> Feb 24 12:34:40 psytux kernel: [    0.732304] [drm] Initialized drm 1.1.0 20060810
>> Feb 24 12:34:40 psytux kernel: [    0.743618] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>> Feb 24 12:34:40 psytux kernel: [    0.743622] i915 0000:00:02.0: setting latency timer to 64
>> Feb 24 12:34:40 psytux kernel: [    0.758588]   alloc irq_desc for 29 on node -1
>> Feb 24 12:34:40 psytux kernel: [    0.758592]   alloc kstat_irqs on node -1
>> Feb 24 12:34:40 psytux kernel: [    0.758601] i915 0000:00:02.0: irq 29 for MSI/MSI-X
>> Feb 24 12:34:40 psytux kernel: [    0.758608] [drm] set up 63M of stolen space
>> Feb 24 12:34:40 psytux kernel: [    1.320148] [drm] TV-20: set mode NTSC 480i 0
>> Feb 24 12:34:40 psytux kernel: [    1.466907] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
>> Feb 24 12:34:40 psytux kernel: [    1.467017] fb1: inteldrmfb frame buffer device
> 
> Screwed up handoff from vesafb to i915.  Should be fixed with today's
> 2.6.32-9 hopefully.  Although really you shouldn't be using vesafb.

You are right, 2.6.32-9 fixes this. Thanks for the pointer and sorry for the noise.

Cheers,

Uli

- --
- - Buck, when exactly did you lose your mind?
- - Three months ago. I woke up one morning married to a pineapple.
  An ugly pineapple... But I loved her!
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)

iQEcBAEBCAAGBQJLhu3FAAoJECLkKOvLj8sGydgH/A2FOmBAxY8c8vMi0jSYAjC9
zFcs4N49Q1TEKfb3UzhB/Qq0FRMGatIhiKPNfuXBqMiRA3YbUXX0BU6NrEgd6CkB
WFNAjs0XaTQFs9uJQK8ewaSjx7nFj2G1QdZU4B0Qqz9S/DZTTQLtG+Ow4RI9Cswd
bzegY4hWk1JnAAbsbIo/s1bbcLwXkJct2clqR3UfCxlFu7ufwaJ7rTL+PS0bI+Wi
w2gmUM7sQpIP3nn+7B5Ld/qXq9vuijTeUd0ekXGhkBE3Td+M84EK78v3Ic2s2r1e
ttx7u636U1yT5Cn33a5zKD2hnUdOFOiQgDq8GIaKSpINlIMrpy0pU9dSyzFEeQo=
=gCMa
-----END PGP SIGNATURE-----


--- End Message ---

Reply to: