[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#552214: marked as done ((no subject))

Your message dated Sat, 13 Feb 2010 13:04:29 +0100
with message-id <20100213120429.GQ2821@stro.at>
and subject line Re: Bug#552214: (no subject)
has caused the Debian Bug report #552214,
regarding (no subject)
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
552214: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=552214
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Subject: linux-image-2.6.26-1-686: je n'arrive pas à avoir un affichage graphique avec ma lenny et une carte graphique ATI Radeon HD
Package: linux-image-2.6.26-1-686
Version: 2.6.26-13lenny2
Severity: critical
Justification: breaks unrelated software



-- Package-specific info:
** Version:
Linux version 2.6.26-1-686 (Debian 2.6.26-13lenny2) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Fri Mar 13 18:08:45 UTC 2009

** Command line:
root=/dev/sdc1 ro single

** Not tainted

** Kernel log:
[    6.055401] usb 5-2: configuration #1 chosen from 1 choice
[    6.063999] usb 5-2: New USB device found, idVendor=04d9, idProduct=048e
[    6.064037] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    6.064088] usbcore: registered new interface driver hiddev
[    6.096888] input: Logitech Logitech USB Keyboard as /class/input/input0
[    6.100903] input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:1d.0-1
[    6.120787] input: Logitech Logitech USB Keyboard as /class/input/input1
[    6.120787] input,hidraw1: USB HID v1.11 Device [Logitech Logitech USB Keyboard] on usb-0000:00:1d.0-1
[    6.156787] input: HID 04d9:048e as /class/input/input2
[    6.168806] ata3: SATA link down (SStatus 0 SControl 300)
[    6.172785] input,hidraw2: USB HID v1.10 Mouse [HID 04d9:048e] on usb-0000:00:1d.0-2
[    6.172785] usbcore: registered new interface driver usbhid
[    6.172785] usbhid: v2.6:USB HID core driver
[    6.538040] ata4: SATA link down (SStatus 0 SControl 300)
[    6.967549] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    6.967587] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
[    6.967622] PCI: Setting latency timer of device 0000:03:00.0 to 64
[    6.971512] scsi4 : ahci
[    6.971512] scsi5 : ahci
[    6.971512] ata5: SATA max UDMA/133 abar m8192@0xe7000000 port 0xe7000100 irq 19
[    6.971512] ata6: SATA max UDMA/133 abar m8192@0xe7000000 port 0xe7000180 irq 19
[    7.534400] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[007b0ced00001fd0]
[    7.546321] ata5: SATA link down (SStatus 0 SControl 300)
[    7.878328] ata6: SATA link down (SStatus 0 SControl 300)
[    7.898306] JMB: IDE controller (0x197b:0x2363 rev 0x02) at  PCI slot 0000:03:00.1
[    7.898306] JMicron IDE 0000:03:00.1: enabling device (0000 -> 0001)
[    7.898306] ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 16 (level, low) -> IRQ 16
[    7.898306] JMB: 100% native mode on irq 16
[    7.898306] PCI: Setting latency timer of device 0000:03:00.1 to 64
[    7.898306]     ide0: BM-DMA at 0xc400-0xc407
[    7.898306]     ide1: BM-DMA at 0xc408-0xc40f
[    7.898306] Probing IDE interface ide0...
[    9.239862] hda: TSSTcorp CDDVDW SH-S222A, ATAPI CD/DVD-ROM drive
[    9.911519] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[    9.911691] hda: drive side 80-wire cable detection failed, limiting max speed to UDMA33
[    9.911725] hda: UDMA/33 mode selected
[    9.912909] Probing IDE interface ide1...
[   10.674139] ide0 at 0xc000-0xc007,0xc102 on irq 16
[   10.680196] ide1 at 0xc200-0xc207,0xc302 on irq 16
[   11.253139] Driver 'sd' needs updating - please use bus_type methods
[   11.253139] sd 0:0:0:0: [sda] 293044655 512-byte hardware sectors (150039 MB)
[   11.253139] sd 0:0:0:0: [sda] Write Protect is off
[   11.253139] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   11.253139] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   11.253139] sd 0:0:0:0: [sda] 293044655 512-byte hardware sectors (150039 MB)
[   11.253139] sd 0:0:0:0: [sda] Write Protect is off
[   11.253139] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   11.253139] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   11.253139]  sda: sda1
[   11.257139] sd 0:0:0:0: [sda] Attached SCSI disk
[   11.257139] sd 1:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB)
[   11.257139] sd 1:0:0:0: [sdb] Write Protect is off
[   11.257139] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   11.257139] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   11.257139] sd 1:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB)
[   11.257139] sd 1:0:0:0: [sdb] Write Protect is off
[   11.257139] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   11.257139] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   11.257139]  sdb:<6>hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
[   11.261146] Uniform CD-ROM driver Revision: 3.20
[   11.265139]  sdb1
[   11.265139] sd 1:0:0:0: [sdb] Attached SCSI disk
[   11.265139] sd 1:0:1:0: [sdc] 586072368 512-byte hardware sectors (300069 MB)
[   11.265139] sd 1:0:1:0: [sdc] Write Protect is off
[   11.265139] sd 1:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[   11.265139] sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   11.265139] sd 1:0:1:0: [sdc] 586072368 512-byte hardware sectors (300069 MB)
[   11.265139] sd 1:0:1:0: [sdc] Write Protect is off
[   11.265139] sd 1:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[   11.265139] sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   11.265139]  sdc: sdc1 sdc2 < sdc5 >
[   11.283516] sd 1:0:1:0: [sdc] Attached SCSI disk
[   11.507760] PM: Starting manual resume from disk
[   11.529437] EXT3-fs: INFO: recovery required on readonly filesystem.
[   11.529437] EXT3-fs: write access will be enabled during recovery.
[   14.664001] kjournald starting.  Commit interval 5 seconds
[   14.664001] EXT3-fs: recovery complete.
[   14.664001] EXT3-fs: mounted filesystem with ordered data mode.
[   16.598039] udevd version 125 started
[   17.251541] Linux agpgart interface v0.103
[   17.370028] input: Power Button (FF) as /class/input/input3
[   17.370028] input: PC Speaker as /class/input/input4
[   17.390027] ACPI: Power Button (FF) [PWRF]
[   17.390027] input: Power Button (CM) as /class/input/input5
[   17.410045] ACPI: Power Button (CM) [PWRB]
[   17.507989] parport_pc 00:08: reported by Plug and Play ACPI
[   17.507989] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   17.515886] ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18
[   17.776256] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[   17.776256] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   17.846774] ACPI: PCI Interrupt 0000:01:00.1[B] -> GSI 17 (level, low) -> IRQ 17
[   17.846841] PCI: Setting latency timer of device 0000:01:00.1 to 64
[   18.477049] Adding 2650684k swap on /dev/sdc5.  Priority:-1 extents:1 across:2650684k
[   18.758192] EXT3 FS on sdc1, internal journal
[   18.896152] loop: module loaded
[   19.999790] NET: Registered protocol family 10
[   19.999795] lo: Disabled Privacy Extensions
[   20.490499] r8169: eth0: link up
[   20.490499] r8169: eth0: link up
[   34.161502] eth0: no IPv6 routers present

** Loaded modules:
Module                  Size  Used by
ipv6                  235300  14 
sbp2                   18572  0 
loop                   12748  0 
snd_hda_intel         324248  0 
snd_pcm_oss            32800  0 
snd_mixer_oss          12320  1 snd_pcm_oss
snd_pcm                62596  2 snd_hda_intel,snd_pcm_oss
snd_seq_dummy           2660  0 
snd_seq_oss            24992  0 
snd_seq_midi            5728  0 
snd_rawmidi            18496  1 snd_seq_midi
snd_seq_midi_event      6432  2 snd_seq_oss,snd_seq_midi
snd_seq                41456  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer              17800  2 snd_pcm,snd_seq
snd_seq_device          6380  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd                    45604  9 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
i2c_i801                7920  0 
parport_pc             22500  0 
parport                30988  1 parport_pc
i2c_core               19828  1 i2c_i801
soundcore               6368  1 snd
pcspkr                  2432  0 
button                  6096  0 
snd_page_alloc          7816  2 snd_hda_intel,snd_pcm
intel_agp              22332  0 
agpgart                28776  1 intel_agp
joydev                  8480  0 
evdev                   8000  0 
ext3                  105512  1 
jbd                    39444  1 ext3
mbcache                 7108  1 ext3
ide_cd_mod             27652  0 
cdrom                  30176  1 ide_cd_mod
sd_mod                 22200  3 
ide_pci_generic         3908  0 [permanent]
jmicron                 2208  0 [permanent]
ide_core               96168  3 ide_cd_mod,ide_pci_generic,jmicron
usbhid                 35904  0 
hid                    33184  1 usbhid
ff_memless              4392  1 usbhid
ata_piix               14180  2 
ahci                   23596  0 
ohci1394               24944  0 
ata_generic             4676  0 
ieee1394               75800  2 sbp2,ohci1394
ehci_hcd               28428  0 
libata                140384  3 ata_piix,ahci,ata_generic
scsi_mod              129356  3 sbp2,sd_mod,libata
uhci_hcd               18672  0 
dock                    8304  1 libata
r8169                  23684  0 
usbcore               118160  4 usbhid,ehci_hcd,uhci_hcd
thermal                15228  0 
processor              32576  5 thermal
fan                     4164  0 
thermal_sys            10856  3 thermal,processor,fan

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller [8086:2e20] (rev 03)
	Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5000]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel modules: intel-agp

00:01.0 PCI bridge [0604]: Intel Corporation 4 Series Chipset PCI Express Root Port [8086:2e21] (rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 0000b000-0000bfff
	Memory behind bridge: e4000000-e5ffffff
	Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:1a.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI])
	Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5004]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 4: I/O ports at e100 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1a.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI])
	Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5004]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 21
	Region 4: I/O ports at e200 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1a.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI])
	Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5004]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 4: I/O ports at e000 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1a.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI])
	Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5006]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at e7305000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd

00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller [8086:3a3e]
	Subsystem: Giga-byte Technology Device [1458:a002]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 22
	Region 0: Memory at e7300000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: HDA Intel
	Kernel modules: snd-hda-intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 1 [8086:3a40] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:1c.3 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 4 [8086:3a46] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 0000c000-0000cfff
	Memory behind bridge: e7000000-e70fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 5 [8086:3a48] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: e6000000-e6ffffff
	Prefetchable memory behind bridge: 00000000e7100000-00000000e71fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:1d.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI])
	Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5004]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 4: I/O ports at e300 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI])
	Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5004]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 4: I/O ports at e400 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI])
	Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5004]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 4: I/O ports at e500 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI])
	Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5006]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at e7304000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
	Memory behind bridge: e7200000-e72fffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIB (ICH10) LPC Interface Controller [8086:3a18]
	Subsystem: Giga-byte Technology Device [1458:5001]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller [8086:3a20] (prog-if 8a [Master SecP PriP])
	Subsystem: Giga-byte Technology Device [1458:b002]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4 [size=1]
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374 [size=1]
	Region 4: I/O ports at f000 [size=16]
	Region 5: I/O ports at f100 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: ata_piix
	Kernel modules: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller [8086:3a30]
	Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5001]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at e7306000 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at 0500 [size=32]
	Kernel driver in use: i801_smbus
	Kernel modules: i2c-i801

00:1f.5 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller [8086:3a26] (prog-if 85 [Master SecO PriO])
	Subsystem: Giga-byte Technology Device [1458:b002]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 0: I/O ports at e700 [size=8]
	Region 1: I/O ports at e800 [size=4]
	Region 2: I/O ports at e900 [size=8]
	Region 3: I/O ports at ea00 [size=4]
	Region 4: I/O ports at eb00 [size=16]
	Region 5: I/O ports at ec00 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: ata_piix
	Kernel modules: ata_piix

01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Device [1002:9498] (prog-if 00 [VGA controller])
	Subsystem: PC Partner Limited Device [174b:e920]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 10
	Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
	Region 2: Memory at e5000000 (64-bit, non-prefetchable) [size=64K]
	Region 4: I/O ports at b000 [size=256]
	[virtual] Expansion ROM at e4000000 [disabled] [size=128K]
	Capabilities: <access denied>

01:00.1 Audio device [0403]: ATI Technologies Inc Device [1002:aa38]
	Subsystem: PC Partner Limited Device [174b:aa38]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin B routed to IRQ 17
	Region 0: Memory at e5010000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: HDA Intel
	Kernel modules: snd-hda-intel

03:00.0 SATA controller [0106]: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller [197b:2363] (rev 02) (prog-if 01 [AHCI 1.0])
	Subsystem: Giga-byte Technology Device [1458:b000]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 19
	Region 5: Memory at e7000000 (32-bit, non-prefetchable) [size=8K]
	Capabilities: <access denied>
	Kernel driver in use: ahci
	Kernel modules: ahci

03:00.1 IDE interface [0101]: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller [197b:2363] (rev 02) (prog-if 85 [Master SecO PriO])
	Subsystem: Giga-byte Technology Device [1458:b000]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 16
	Region 0: I/O ports at c000 [size=8]
	Region 1: I/O ports at c100 [size=4]
	Region 2: I/O ports at c200 [size=8]
	Region 3: I/O ports at c300 [size=4]
	Region 4: I/O ports at c400 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: JMicron IDE
	Kernel modules: jmicron

04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
	Subsystem: Giga-byte Technology Device [1458:e000]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 219
	Region 0: I/O ports at d000 [size=256]
	Region 2: Memory at e7110000 (64-bit, prefetchable) [size=4K]
	Region 4: Memory at e7100000 (64-bit, prefetchable) [size=64K]
	[virtual] Expansion ROM at e7120000 [disabled] [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: r8169
	Kernel modules: r8169

05:07.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) [104c:8024] (prog-if 10 [OHCI])
	Subsystem: Giga-byte Technology Device [1458:1000]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at e7204000 (32-bit, non-prefetchable) [size=2K]
	Region 1: Memory at e7200000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: ohci1394
	Kernel modules: ohci1394



-- System Information:
Debian Release: 5.0.3
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.26-1-686 (SMP w/4 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.26-1-686 depends on:
ii  debconf [debconf-2.0]         1.5.24     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.92o      tools for generating an initramfs
ii  module-init-tools             3.4-1      tools for managing Linux kernel mo

Versions of packages linux-image-2.6.26-1-686 recommends:
ii  libc6-i686                    2.7-18     GNU C Library: Shared libraries [i

Versions of packages linux-image-2.6.26-1-686 suggests:
ii  grub                       0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn  linux-doc-2.6.26           <none>        (no description available)

-- debconf information:
  linux-image-2.6.26-1-686/preinst/abort-overwrite-2.6.26-1-686:
  shared/kernel-image/really-run-bootloader: true
  linux-image-2.6.26-1-686/postinst/bootloader-error-2.6.26-1-686:
  linux-image-2.6.26-1-686/postinst/depmod-error-initrd-2.6.26-1-686: false
  linux-image-2.6.26-1-686/prerm/removing-running-kernel-2.6.26-1-686: true
  linux-image-2.6.26-1-686/postinst/old-system-map-link-2.6.26-1-686: true
  linux-image-2.6.26-1-686/preinst/abort-install-2.6.26-1-686:
  linux-image-2.6.26-1-686/preinst/lilo-has-ramdisk:
  linux-image-2.6.26-1-686/preinst/bootloader-initrd-2.6.26-1-686: true
  linux-image-2.6.26-1-686/prerm/would-invalidate-boot-loader-2.6.26-1-686: true
  linux-image-2.6.26-1-686/preinst/elilo-initrd-2.6.26-1-686: true
  linux-image-2.6.26-1-686/postinst/kimage-is-a-directory:
  linux-image-2.6.26-1-686/postinst/old-dir-initrd-link-2.6.26-1-686: true
  linux-image-2.6.26-1-686/postinst/create-kimage-link-2.6.26-1-686: true
  linux-image-2.6.26-1-686/preinst/lilo-initrd-2.6.26-1-686: true
  linux-image-2.6.26-1-686/postinst/old-initrd-link-2.6.26-1-686: true
  linux-image-2.6.26-1-686/preinst/overwriting-modules-2.6.26-1-686: true
  linux-image-2.6.26-1-686/postinst/depmod-error-2.6.26-1-686: false
  linux-image-2.6.26-1-686/postinst/bootloader-test-error-2.6.26-1-686:
  linux-image-2.6.26-1-686/preinst/failed-to-move-modules-2.6.26-1-686:
  linux-image-2.6.26-1-686/preinst/initrd-2.6.26-1-686:

--- End Message ---
--- Begin Message --- 
On Mon, 28 Dec 2009, Moritz Muehlenhoff wrote:

> On Sat, Oct 24, 2009 at 02:38:56PM +0200, Bastian Blank wrote:
> > On Sat, Oct 24, 2009 at 01:33:14PM +0200, y wrote:
> > 
> > Who? I like to know who I'm talking with.
> > 
> > > Subject: linux-image-2.6.26-1-686: je n'arrive pas à avoir un affichage graphique avec ma lenny et une carte graphique ATI Radeon HD
> > 
> > Sorry, but we don't speak french here. And even after my try to
> > translate that, I'm unable to see what you want.
> > 
> > > Package: linux-image-2.6.26-1-686
> > > Version: 2.6.26-13lenny2
> > > Severity: critical
> > > Justification: breaks unrelated software
> > 
> > No, it does not.
> > 
> > > -- Package-specific info:
> > > ** Version:
> > > Linux version 2.6.26-1-686 (Debian 2.6.26-13lenny2) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Fri Mar 13 18:08:45 UTC 2009
> > 
> > You want to do an upgrade of that system immediately.
> > 
> > > 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Device [1002:9498] (prog-if 00 [VGA controller])
> > 
> > This is an ATI Radeon HD 4650 aka a R700. No information was available
> > for this kind of chip at the release of Lenny, so it may not work at
> > all.
> 
> Benoit,
> The next release of Debian (6.0, code name Squeeze) will be based
> on 2.6.32. Please test the current 2.6.32 from unstable and tell
> us whether the problem persists. If so, we should report it upstream
> to the kernel.org developers.
> 
> The 2.6.32 kernel is available from packages.debian.org and can
> be installed in both Debian stable, testing and unstable
> installations.
> 
> Thanks,
>         Moritz
> 

closing as no follow ups on aboves advice. Lenny can't support said
device but squeeze will. thanks for your report.

--- End Message ---
Reply to: