Bug#535131: marked as done (linux-image-2.6.30-1-686: b43 driver claims support for unsupported device)

To: maximilian attems <max@stro.at>
Subject: Bug#535131: marked as done (linux-image-2.6.30-1-686: b43 driver claims support for unsupported device)
From: owner@bugs.debian.org (Debian Bug Tracking System)
Date: Sat, 13 Feb 2010 11:21:04 +0000
Message-id: <handler.535131.D535131.12660599844286.ackdone@bugs.debian.org>
References: <20100213111913.GQ2821@stro.at> <20090629231907.3174.909.reportbug@debian.hogyros.de>

Your message dated Sat, 13 Feb 2010 12:19:13 +0100
with message-id <20100213111913.GQ2821@stro.at>
and subject line Re: Bug#535131: linux-image-2.6.30-1-686: b43 driver claims support for unsupported device
has caused the Debian Bug report #535131,
regarding linux-image-2.6.30-1-686: b43 driver claims support for unsupported device
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
535131: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=535131
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems

--- Begin Message ---

To: Debian Bug Tracking System <submit@bugs.debian.org>
Subject: linux-image-2.6.30-1-686: b43 driver claims support for unsupported device
From: Simon Richter <sjr@debian.org>
Date: Tue, 30 Jun 2009 01:19:07 +0200
Message-id: <20090629231907.3174.909.reportbug@debian.hogyros.de>

Package: linux-image-2.6.30-1-686
Version: 2.6.30-1
Severity: normal

Hi,

starting with 2.6.30, the b43 driver is autoloaded for the bcm4312 with
LP-PHY, identified by PCI Product ID 0x4315; the driver then complains that
the device is unsupported.

This shadows the declaration by the non-free broadcom-sta driver, so this
driver is no longer autoloaded, and I have to explicitly load it in order
to allow my WLAN to work.

   Simon

-- Package-specific info:
** Version:
Linux version 2.6.30-1-686 (Debian 2.6.30-1) (waldi@debian.org) (gcc version 4.3.3 (Debian 4.3.3-11) ) #1 SMP Sun Jun 14 16:11:32 UTC 2009

** Command line:
root=/dev/hda1 ro quiet

** Tainted: P (1)

** Kernel log:
[    4.218116] hda: 15005088 sectors (7682 MB), CHS=14886/16/63
[    4.218126] hda: cache flushes not supported
[    4.218238]  hda: hda1
[    4.344926] kjournald starting.  Commit interval 5 seconds
[    4.344936] EXT3-fs: mounted filesystem with ordered data mode.
[    4.862891] udev: starting version 141
[    8.408721] Linux agpgart interface v0.103
[    8.645499] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[    8.645980] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[    8.648672] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    8.949496] jmb38x_ms 0000:02:00.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    8.949515] jmb38x_ms 0000:02:00.3: setting latency timer to 64
[    8.966501] input: PC Speaker as /devices/platform/pcspkr/input/input1
[    9.069230] intel_rng: FWH not detected
[    9.112179] Bluetooth: Core ver 2.15
[    9.196650] cfg80211: Using static regulatory domain info
[    9.196658] cfg80211: Regulatory domain: US
[    9.196664] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    9.196673] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[    9.196683] 	(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    9.196691] 	(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    9.196699] 	(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    9.196708] 	(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    9.196717] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[    9.196741] cfg80211: Calling CRDA for country: US
[    9.212619] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    9.472141] NET: Registered protocol family 31
[    9.472148] Bluetooth: HCI device and connection manager initialized
[    9.472157] Bluetooth: HCI socket layer initialized
[    9.537164] Bluetooth: Generic Bluetooth USB driver ver 0.5
[    9.537361] usbcore: registered new interface driver btusb
[    9.627556] Linux video capture interface: v2.00
[    9.736764] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   10.013632] b43-phy0: Broadcom 4312 WLAN found (core revision 15)
[   10.042908] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_0.3M (064e:a102)
[   10.180922] input: Laptop_Integrated_Webcam_0.3M as /devices/pci0000:00/0000:00:1d.7/usb5/5-2/5-2:1.0/input/input2
[   10.181076] usbcore: registered new interface driver uvcvideo
[   10.181096] USB Video Class driver (v0.1.0)
[   10.344469] b43-phy0 ERROR: FOUND UNSUPPORTED PHY (Analog 6, Type 5, Revision 1)
[   10.344829] b43: probe of ssb0:0 failed with error -95
[   10.344888] Broadcom 43xx driver loaded [ Features: PMLR, Firmware-ID: FW13 ]
[   10.441923] Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04711/0xa00000
[   10.528221] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input3
[   11.695767] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[   11.695867] ACPI: Power Button [PWRF]
[   11.696063] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
[   11.697719] ACPI: Lid Switch [LID0]
[   11.697945] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6
[   11.698046] ACPI: Power Button [PWRB]
[   11.698234] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input7
[   11.698311] ACPI: Sleep Button [SLPB]
[   11.709224] ACPI: AC Adapter [ACAD] (off-line)
[   11.723911] ACPI: SSDT 3f6dcc32 00245 (v02  PmRef  Cpu0Ist 00003000 INTL 20050624)
[   11.724771] ACPI: SSDT 3f6dc5c8 005E5 (v02  PmRef  Cpu0Cst 00003001 INTL 20050624)
[   11.726013] Monitor-Mwait will be used to enter C-1 state
[   11.812052] Monitor-Mwait will be used to enter C-2 state
[   11.829048] Monitor-Mwait will be used to enter C-3 state
[   11.829091] Marking TSC unstable due to TSC halts in idle
[   11.829280] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[   11.829382] processor ACPI_CPU:00: registered as cooling_device0
[   11.829398] ACPI: Processor [CPU0] (supports 8 throttling states)
[   11.830370] ACPI: SSDT 3f6dce77 000D4 (v02  PmRef  Cpu1Ist 00003000 INTL 20050624)
[   11.831111] ACPI: SSDT 3f6dcbad 00085 (v02  PmRef  Cpu1Cst 00003000 INTL 20050624)
[   11.866151] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[   11.866246] processor ACPI_CPU:01: registered as cooling_device1
[   11.866261] ACPI: Processor [CPU1] (supports 8 throttling states)
[   11.888468] ACPI: Battery Slot [BAT1] (battery present)
[   12.005482] acpi device:02: registered as cooling_device2
[   12.006034] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input8
[   12.006160] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   13.316465] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   13.316565] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   13.648519] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[   14.602895] EXT3 FS on hda1, internal journal
[   15.720784] loop: module loaded
[   17.342634] r8169: eth0: link down
[   17.343249] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.993097] Bluetooth: L2CAP ver 2.13
[   19.993104] Bluetooth: L2CAP socket layer initialized
[   20.138219] Bluetooth: RFCOMM socket layer initialized
[   20.138259] Bluetooth: RFCOMM TTY layer initialized
[   20.138272] Bluetooth: RFCOMM ver 1.11
[   31.998063] lib80211: common routines for IEEE802.11 drivers
[   31.998080] lib80211_crypt: registered algorithm 'NULL'
[   32.065531] b43-pci-bridge 0000:03:00.0: PCI INT A disabled
[   32.304535] wl: module license 'MIXED/Proprietary' taints kernel.
[   32.304543] Disabling lock debugging due to kernel taint
[   32.309523] wl 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   32.309551] wl 0000:03:00.0: setting latency timer to 64
[   32.326537] eth1 (wl): not using net_device_ops yet
[   32.368855] lib80211_crypt: registered algorithm 'TKIP'
[   32.371446] eth1: Broadcom BCM4315 802.11 Wireless Controller 5.10.91.9
[   43.548034] eth1: no IPv6 routers present
[   81.013736] [drm] Initialized drm 1.1.0 20060810
[   81.040450] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   81.040460] pci 0000:00:02.0: setting latency timer to 64
[   81.043340] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[  486.405243] TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=f645b240
[  611.433003] TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=f645b240
[  736.358360] TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=f645b240

** Loaded modules:
Module                  Size  Used by
i915                  147532  2 
drm                   137780  3 i915
i2c_algo_bit            4868  1 i915
michael_mic             2104  4 
arc4                    1560  2 
ecb                     2368  2 
lib80211_crypt_tkip     7896  0 
wl                   1267080  0 
lib80211                6048  2 lib80211_crypt_tkip,wl
rfcomm                 30236  1 
l2cap                  18104  5 rfcomm
acpi_cpufreq            7608  0 
cpufreq_conservative     6256  0 
cpufreq_stats           3520  0 
cpufreq_powersave       1292  0 
cpufreq_userspace       2768  0 
loop                   13316  0 
snd_hda_codec_realtek   178316  1 
snd_hda_intel          22192  0 
snd_hda_codec          63520  2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep               6104  1 snd_hda_codec
snd_pcm_oss            32232  0 
snd_mixer_oss          12368  1 snd_pcm_oss
snd_pcm                62364  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_midi            5688  0 
joydev                  8576  0 
snd_rawmidi            18580  1 snd_seq_midi
snd_seq_midi_event      6212  1 snd_seq_midi
snd_seq                42436  2 snd_seq_midi,snd_seq_midi_event
video                  17980  1 i915
output                  2604  1 video
battery                 6012  0 
processor              34476  3 acpi_cpufreq
button                  5060  0 
ac                      2960  0 
snd_timer              17436  2 snd_pcm,snd_seq
snd_seq_device          6136  3 snd_seq_midi,snd_rawmidi,snd_seq
snd                    49040  11 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
serio_raw               4556  0 
uvcvideo               49296  0 
dell_laptop             3164  0 
evdev                   8028  5 
rfkill                  9668  1 dell_laptop
dcdbas                  6732  1 dell_laptop
videodev               31040  1 uvcvideo
v4l1_compat            11416  2 uvcvideo,videodev
btusb                  10276  2 
psmouse                37528  0 
soundcore               6184  1 snd
i2c_i801                8580  0 
snd_page_alloc          8180  2 snd_hda_intel,snd_pcm
bluetooth              46924  7 rfcomm,l2cap,btusb
i2c_core               20840  4 i915,drm,i2c_algo_bit,i2c_i801
pcspkr                  2104  0 
jmb38x_ms               7876  0 
memstick                8948  1 jmb38x_ms
intel_agp              22908  1 
agpgart                30788  3 drm,intel_agp
ext3                  107180  1 
jbd                    41040  1 ext3
mbcache                 6924  1 ext3
ide_gd_mod             19852  2 
piix                    5680  1 
ide_pci_generic         3632  0 
ide_core               88100  3 ide_gd_mod,piix,ide_pci_generic
ata_generic             4340  0 
mmc_block               9036  0 
libata                150624  1 ata_generic
ehci_hcd               29660  0 
uhci_hcd               19140  0 
sdhci_pci               6540  0 
sdhci                  14848  1 sdhci_pci
r8169                  27740  0 
mii                     4664  1 r8169
mmc_core               46272  2 mmc_block,sdhci
led_class               3852  1 sdhci
usbcore               125872  5 uvcvideo,btusb,ehci_hcd,uhci_hcd
scsi_mod              131604  1 libata
thermal                12572  0 
fan                     4040  0 
thermal_sys            13128  4 video,processor,thermal,fan

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GME Express Memory Controller Hub [8086:27ac] (rev 03)
	Subsystem: Dell Device [1028:02b0]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: agpgart-intel
	Kernel modules: intel-agp

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GME Express Integrated Graphics Controller [8086:27ae] (rev 03) (prog-if 00 [VGA controller])
	Subsystem: Dell Device [1028:02b0]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at f0000000 (32-bit, non-prefetchable) [size=512K]
	Region 1: I/O ports at 1800 [size=8]
	Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
	Region 3: Memory at f0300000 (32-bit, non-prefetchable) [size=256K]
	Capabilities: <access denied>
	Kernel modules: intelfb

00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
	Subsystem: Dell Device [1028:02b0]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Region 0: Memory at f0080000 (32-bit, non-prefetchable) [size=512K]
	Capabilities: <access denied>

00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02)
	Subsystem: Dell Device [1028:02b0]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 22
	Region 0: Memory at f0540000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: HDA Intel
	Kernel modules: snd-hda-intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	Memory behind bridge: f0100000-f01fffff
	Prefetchable memory behind bridge: 0000000050000000-00000000500fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	Memory behind bridge: f0200000-f02fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:1c.2 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: 50100000-501fffff
	Prefetchable memory behind bridge: 00000000f0600000-00000000f06fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Dell Device [1028:02b0]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 4: I/O ports at 1820 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Dell Device [1028:02b0]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 4: I/O ports at 1840 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Dell Device [1028:02b0]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 4: I/O ports at 1860 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Dell Device [1028:02b0]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin D routed to IRQ 16
	Region 4: I/O ports at 1880 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
	Subsystem: Dell Device [1028:02b0]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at f0544000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02)
	Subsystem: Dell Device [1028:02b0]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel modules: intel-rng, iTCO_wdt

00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 02) (prog-if 8a [Master SecP PriP])
	Subsystem: Dell Device [1028:02b0]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4 [size=1]
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374 [size=1]
	Region 4: I/O ports at 1810 [size=16]
	Kernel driver in use: PIIX_IDE
	Kernel modules: piix

00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 02)
	Subsystem: Dell Device [1028:02b0]
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin B routed to IRQ 19
	Region 4: I/O ports at 18a0 [size=32]
	Kernel driver in use: i801_smbus
	Kernel modules: i2c-i801

02:00.0 System peripheral [0880]: JMicron Technologies, Inc. Device [197b:2382]
	Subsystem: Dell Device [1028:02b0]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at f0100000 (32-bit, non-prefetchable) [size=256]
	[virtual] Expansion ROM at 50000000 [disabled] [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: sdhci-pci
	Kernel modules: sdhci-pci

02:00.2 SD Host controller [0805]: JMicron Technologies, Inc. Device [197b:2381] (prog-if 01)
	Subsystem: Dell Device [1028:02b0]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at f0100400 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel modules: sdhci-pci

02:00.3 System peripheral [0880]: JMicron Technologies, Inc. Device [197b:2383]
	Subsystem: Dell Device [1028:02b0]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at f0100800 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: jmb38x_ms
	Kernel modules: jmb38x_ms

03:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01)
	Subsystem: Broadcom Corporation Device [14e4:04b5]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at f0200000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: wl
	Kernel modules: ssb, wl

04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
	Subsystem: Dell Device [1028:02b0]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 27
	Region 0: I/O ports at 2000 [size=256]
	Region 2: Memory at f0610000 (64-bit, prefetchable) [size=4K]
	Region 4: Memory at f0600000 (64-bit, prefetchable) [size=64K]
	[virtual] Expansion ROM at f0620000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: r8169
	Kernel modules: r8169



-- System Information:
Debian Release: 5.0.2
  APT prefers stable
  APT policy: (990, 'stable'), (500, 'unstable')
Architecture: i386 (i686)

Kernel: Linux 2.6.30-1-686 (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.30-1-686 depends on:
ii  debconf [debconf-2.0]         1.5.24     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.92o      tools for generating an initramfs
ii  module-init-tools             3.4-1      tools for managing Linux kernel mo

Versions of packages linux-image-2.6.30-1-686 recommends:
ii  libc6-i686                    2.7-18     GNU C Library: Shared libraries [i

Versions of packages linux-image-2.6.30-1-686 suggests:
ii  grub                       0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn  linux-doc-2.6.30           <none>        (no description available)

-- debconf information excluded

--- End Message ---

--- Begin Message ---

To: 535131-done@bugs.debian.org

Subject: Re: Bug#535131: linux-image-2.6.30-1-686: b43 driver claims support for unsupported device

From: maximilian attems <max@stro.at>

Date: Sat, 13 Feb 2010 12:19:13 +0100

Message-id: <20100213111913.GQ2821@stro.at>

In-reply-to: <20090701133428.GA30739@honey.hogyros.de>

References: <20090629231907.3174.909.reportbug@debian.hogyros.de> <1246320550.1828.322.camel@deadeye> <20090630123758.GB14897@honey.hogyros.de> <20090630180317.GH30210@decadent.org.uk> <20090630191511.GA26609@honey.hogyros.de> <20090701082758.GJ30210@decadent.org.uk> <20090701084418.GA29625@honey.hogyros.de> <20090701093042.GL24264@wavehammer.waldi.eu.org> <20090701133428.GA30739@honey.hogyros.de>
On Wed, 01 Jul 2009, Simon Richter wrote:

> Hi,
> 
> On Wed, Jul 01, 2009 at 11:30:42AM +0200, Bastian Blank wrote:
> 
> > And why is it a bug in the kernel if an external module fails to load?
> 
> The bug is declaring support for an unsupported device.
> 
> > Please show the following information:
> 
> Will do when I'm back at that machine.
> 
> > > Autoload works with 2.6.29.
> 
> > So the wl module was not updated for 2.6.30? The kernel does not
> > consider kernel level interfaces as stable.
> 
> Define "not updated". Is there a change in the declaration syntax for PCI
> IDs? If so, the bug can be reassigned to broadcom-sta-source.
> 

closing as no follow up since.

also this seems just user error just blacklist said module
if you prefer to use out of tree binary junk.
later has no influence on what is done in linux-2.6,
also blacklisting is really easy.

fail to see a bug here.
--- End Message ---

Reply to:

Prev by Date: Bug#563607: linux-source-2.6.30: Will not boot past the beginning of the GUI in Xwindow -- Window manager dies
Next by Date: Bug#535270: marked as done (linux-image-2.6.30-1-amd64: Waiting for root file system)
Previous by thread: Bug#563607: linux-source-2.6.30: Will not boot past the beginning of the GUI in Xwindow -- Window manager dies
Next by thread: Bug#535270: marked as done (linux-image-2.6.30-1-amd64: Waiting for root file system)
Index(es):
- Date
- Thread