Bug#568223: hibernate to disk crashes the system
Package: linux-2.6
Version: 2.6.32-5
Severity: critical
Justification for "critical": Crashes the complete system,
including unrelated software. If this kind of problem is
typically not considered as critical, please adjust.
With 2.6.30 hibernating to disk worked (most of the time, but
not always). With 2.6.32 the system crashes immediately when
trying to hibernate from Gnome and I have to switch off the
computer. How can I debug the problem? Are there any interesting
log files or useful shell commands?
-- Package-specific info:
** Version:
Linux version 2.6.32-trunk-686 (Debian 2.6.32-5) (ben@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sun Jan 10 06:32:16 UTC 2010
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-trunk-686 root=/dev/mapper/vg0-lv0 ro quiet
** Not tainted
** Kernel log:
[ 5.611015] sd 1:0:0:0: [sda] Write Protect is off
[ 5.611019] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.611042] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.611180] sda:
[ 5.615167] ide-cd driver 5.00
[ 5.617025] ide-cd: hda: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
[ 5.617031] Uniform CD-ROM driver Revision: 3.20
[ 5.638283] sda1 sda2 sda3
[ 5.638551] sd 1:0:0:0: [sda] Attached SCSI disk
[ 5.839180] device-mapper: uevent: version 1.0.3
[ 5.839358] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 8.684415] usb-storage: device scan complete
[ 8.686532] scsi 0:0:0:0: Direct-Access Generic STORAGE DEVICE 9407 PQ: 0 ANSI: 0
[ 8.688396] sd 0:0:0:0: [sdb] Attached SCSI removable disk
[ 26.908953] atkbd.c: Unknown key pressed (translated set 2, code 0x83 on isa0060/serio0).
[ 26.908958] atkbd.c: Use 'setkeycodes e003 <keycode>' to make it known.
[ 51.845837] PM: Starting manual resume from disk
[ 51.930463] kjournald starting. Commit interval 5 seconds
[ 51.930470] EXT3-fs: mounted filesystem with ordered data mode.
[ 58.069378] udev: starting version 150
[ 62.328333] ACPI: SSDT 7f687ee3 0027A (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 62.328878] ACPI: SSDT 7f687874 005EA (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 62.344371] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 62.376259] Monitor-Mwait will be used to enter C-1 state
[ 62.376287] Monitor-Mwait will be used to enter C-2 state
[ 62.376294] Marking TSC unstable due to TSC halts in idle
[ 62.376388] processor LNXCPU:00: registered as cooling_device2
[ 62.376857] Switching to clocksource hpet
[ 62.392296] ACPI: SSDT 7f68815d 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 62.392620] ACPI: SSDT 7f687e5e 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 62.420363] processor LNXCPU:01: registered as cooling_device3
[ 62.452139] ACPI: Battery Slot [BAT0] (battery present)
[ 62.468115] ACPI: AC Adapter [ADP1] (on-line)
[ 62.492107] ACPI: Battery Slot [BAT1] (battery absent)
[ 62.512866] parport_pc 00:09: reported by Plug and Play ACPI
[ 62.512928] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE]
[ 62.684142] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 62.684149] ACPI: I/O resource 0000:00:1f.3 [0x1c00-0x1c1f] conflicts with ACPI region SMBI [0x1c00-0x1c0f]
[ 62.707028] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 63.296264] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04753/0x200000
[ 63.329932] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
[ 63.753288] Linux video capture interface: v2.00
[ 63.938493] HDA Intel 0000:00:1b.0: enabling device (0104 -> 0106)
[ 63.938503] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 63.938546] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 64.216453] hda_codec: ALC262: BIOS auto-probing.
[ 64.217467] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 64.270869] uvcvideo: Found UVC 1.00 device FO13FF-65-1 PC-CAM (05c8:0103)
[ 64.275334] input: FO13FF-65-1 PC-CAM as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input9
[ 64.275442] usbcore: registered new interface driver uvcvideo
[ 64.275480] USB Video Class driver (v0.1.0)
[ 66.411087] EXT3 FS on dm-1, internal journal
[ 66.772449] loop: module loaded
[ 68.846173] kjournald starting. Commit interval 5 seconds
[ 68.846430] EXT3 FS on sda1, internal journal
[ 68.846435] EXT3-fs: mounted filesystem with ordered data mode.
[ 68.880327] kjournald starting. Commit interval 5 seconds
[ 68.880692] EXT3 FS on sda3, internal journal
[ 68.880696] EXT3-fs: mounted filesystem with ordered data mode.
[ 68.942335] Adding 2928632k swap on /dev/mapper/vg0-lv1. Priority:-1 extents:1 across:2928632k
[ 71.961054] sky2 eth0: enabling interface
[ 71.961266] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 72.709935] fuse init (API version 7.13)
[ 73.242563] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input10
[ 73.644310] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 73.644513] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 76.489373] apm: BIOS not found.
[ 82.833996] Bluetooth: Core ver 2.15
[ 82.834100] NET: Registered protocol family 31
[ 82.834105] Bluetooth: HCI device and connection manager initialized
[ 82.834112] Bluetooth: HCI socket layer initialized
[ 82.904515] Bluetooth: L2CAP ver 2.14
[ 82.904522] Bluetooth: L2CAP socket layer initialized
[ 82.978757] Bluetooth: RFCOMM TTY layer initialized
[ 82.978765] Bluetooth: RFCOMM socket layer initialized
[ 82.978770] Bluetooth: RFCOMM ver 1.11
[ 83.039709] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 83.039716] Bluetooth: BNEP filters: protocol multicast
[ 83.133261] Bridge firewalling registered
[ 83.200641] Bluetooth: SCO (Voice Link) ver 0.6
[ 83.200647] Bluetooth: SCO socket layer initialized
[ 84.437034] eth0: no IPv6 routers present
[ 90.080307] lp0: using parport0 (interrupt-driven).
[ 90.099755] ppdev: user-space parallel port driver
[ 94.609153] [drm] Initialized drm 1.1.0 20060810
[ 94.668336] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 94.668342] i915 0000:00:02.0: setting latency timer to 64
[ 94.673079] i915 0000:00:02.0: irq 29 for MSI/MSI-X
[ 94.673088] [drm] set up 7M of stolen space
[ 95.757981] [drm] TV-16: set mode NTSC 480i 0
[ 95.929481] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
[ 95.929580] fb1: inteldrmfb frame buffer device
[ 95.929582] registered panic notifier
[ 95.929591] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 96.024726] [drm] DAC-6: set mode 1680x1050 34
[ 96.110483] [drm] LVDS-8: set mode 1280x800 35
[ 96.888296] [drm] DAC-6: set mode 1024x768 37
[ 97.224587] [drm] LVDS-8: set mode 1024x768 38
[ 131.293427] [drm] LVDS-8: set mode 39
[ 131.683033] [drm] DAC-6: set mode 3e
** Model information
not available
** Loaded modules:
Module Size Used by
i915 217023 1
drm_kms_helper 17183 1 i915
drm 107507 3 i915,drm_kms_helper
i2c_algo_bit 3497 1 i915
ppdev 4058 0
lp 5570 0
sco 5837 2
bridge 32851 0
stp 996 1 bridge
bnep 7376 2
rfcomm 25063 0
l2cap 21677 4 bnep,rfcomm
crc16 1027 1 l2cap
bluetooth 36259 6 sco,bnep,rfcomm,l2cap
rfkill 10196 3 bluetooth
acpi_cpufreq 4907 0
cpufreq_stats 1940 0
cpufreq_conservative 4018 0
cpufreq_userspace 1444 0
cpufreq_powersave 602 0
binfmt_misc 4875 1
uinput 4796 1
fuse 43554 1
snd_pcm_oss 28479 0
snd_mixer_oss 10461 1 snd_pcm_oss
loop 9721 0
uvcvideo 45194 0
snd_hda_codec_realtek 162851 1
snd_hda_intel 15263 1
snd_hda_codec 45998 2 snd_hda_codec_realtek,snd_hda_intel
videodev 25445 1 uvcvideo
v4l1_compat 10250 2 uvcvideo,videodev
snd_hwdep 4054 1 snd_hda_codec
snd_pcm 47350 3 snd_pcm_oss,snd_hda_intel,snd_hda_codec
snd_seq 35303 0
joydev 6771 0
snd_timer 12258 2 snd_pcm,snd_seq
snd_seq_device 3673 1 snd_seq
snd 33551 12 snd_pcm_oss,snd_mixer_oss,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
soundcore 3450 1 snd
i2c_i801 6442 0
i2c_core 12612 5 i915,drm,i2c_algo_bit,videodev,i2c_i801
parport_pc 15799 1
psmouse 44409 0
snd_page_alloc 4977 2 snd_hda_intel,snd_pcm
pcspkr 1207 0
evdev 5609 24
ac 1640 0
container 1833 0
serio_raw 2916 0
parport 22554 3 ppdev,lp,parport_pc
battery 3782 0
processor 25803 3 acpi_cpufreq
ext3 93828 3
jbd 31965 1 ext3
mbcache 3762 1 ext3
sha256_generic 10748 2
aes_i586 6816 2
aes_generic 25738 1 aes_i586
cbc 2047 1
dm_crypt 9059 1
dm_mod 45854 9 dm_crypt
ide_cd_mod 21044 0
sd_mod 25717 4
crc_t10dif 1012 1 sd_mod
cdrom 26487 1 ide_cd_mod
ide_pci_generic 1924 0
ata_generic 2015 0
usb_storage 29825 0
ahci 26446 3
uhci_hcd 15953 0
video 14605 1 i915
libata 113728 2 ata_generic,ahci
intel_agp 20145 1
output 1204 1 video
agpgart 19516 2 drm,intel_agp
sky2 32849 0
button 3598 1 i915
piix 3564 0
ide_core 63850 3 ide_cd_mod,ide_pci_generic,piix
scsi_mod 101073 3 sd_mod,usb_storage,libata
ehci_hcd 27230 0
usbcore 97930 5 uvcvideo,usb_storage,uhci_hcd,ehci_hcd
nls_base 4541 1 usbcore
thermal 9206 0
fan 2586 0
thermal_sys 9378 4 processor,video,thermal,fan
** Network interface configuration:
auto lo
iface lo inet loopback
allow-hotplug eth0
iface eth0 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:a0:d1:c9:8f:f1 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.3/24 brd 192.168.1.255 scope global eth0
inet6 fe80::2a0:d1ff:fec9:8ff1/64 scope link
valid_lft forever preferred_lft forever
3: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
link/ether f2:b6:a0:93:f3:a0 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 520 8 0 0 0 0 0 0 520 8 0 0 0 0 0 0
eth0: 93694 93 0 0 0 0 0 0 17527 136 0 0 0 0 0 0
pan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
116 total packets received
2 with invalid addresses
0 forwarded
0 incoming packets discarded
114 incoming packets delivered
109 requests sent out
Icmp:
4 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 4
4 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 4
IcmpMsg:
InType3: 4
OutType3: 4
Tcp:
1 active connections openings
0 passive connection openings
0 failed connection attempts
0 connection resets received
1 connections established
80 segments received
73 segments send out
0 segments retransmited
0 bad segments received.
0 resets sent
Udp:
25 packets received
4 packets to unknown port received.
0 packet receive errors
30 packets sent
UdpLite:
TcpExt:
4 delayed acks sent
42 packets directly queued to recvmsg prequeue.
14420 bytes directly received in process context from prequeue
49 packet headers predicted
10 packets header predicted and directly queued to user
14 predicted acknowledgments
IpExt:
InMcastPkts: 20
OutMcastPkts: 22
InOctets: 95735
OutOctets: 11708
InMcastOctets: 3053
OutMcastOctets: 3133
*** Device features:
eth0: 0x10983
lo: 0x13865
pan0: 0xff3865
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 03)
Subsystem: Fujitsu Technology Solutions Device [1734:110f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 03) (prog-if 00 [VGA controller])
Subsystem: Fujitsu Technology Solutions Device [1734:110f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 29
Region 0: Memory at fc000000 (64-bit, non-prefetchable) [size=1M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 18f8 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a03] (rev 03)
Subsystem: Fujitsu Technology Solutions Device [1734:110f]
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at fc100000 (64-bit, non-prefetchable) [disabled] [size=1M]
Capabilities: <access denied>
00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 03) (prog-if 00 [UHCI])
Subsystem: Fujitsu Technology Solutions Device [1734:110f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 03) (prog-if 00 [UHCI])
Subsystem: Fujitsu Technology Solutions Device [1734:110f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 1860 [size=32]
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Fujitsu Technology Solutions Device [1734:110f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fc406000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03)
Subsystem: Fujitsu Technology Solutions Device [1734:110f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fc400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f6000000-f7ffffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f8000000-f9ffffff
Prefetchable memory behind bridge: 00000000f2000000-00000000f3ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 [8086:2843] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=07, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: fa000000-fbffffff
Prefetchable memory behind bridge: 00000000f4000000-00000000f5ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03) (prog-if 00 [UHCI])
Subsystem: Fujitsu Technology Solutions Device [1734:110f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 1880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03) (prog-if 00 [UHCI])
Subsystem: Fujitsu Technology Solutions Device [1734:110f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 18a0 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03) (prog-if 00 [UHCI])
Subsystem: Fujitsu Technology Solutions Device [1734:110f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 18c0 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03) (prog-if 20 [EHCI])
Subsystem: Fujitsu Technology Solutions Device [1734:110f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fc406400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=08, subordinate=08, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 03)
Subsystem: Fujitsu Technology Solutions Device [1734:110f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Fujitsu Technology Solutions Device [1734:110f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 1830 [size=16]
Kernel driver in use: PIIX_IDE
00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Fujitsu Technology Solutions Device [1734:110f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 28
Region 0: I/O ports at 1c50 [size=8]
Region 1: I/O ports at 1c44 [size=4]
Region 2: I/O ports at 1c48 [size=8]
Region 3: I/O ports at 1c40 [size=4]
Region 4: I/O ports at 1c20 [size=32]
Region 5: Memory at fc405000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 03)
Subsystem: Fujitsu Technology Solutions Device [1734:110f]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 19
Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1c00 [size=32]
04:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller [11ab:4363] (rev 14)
Subsystem: Fujitsu Technology Solutions Device [1734:110f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
Region 0: Memory at f8000000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at 3000 [size=256]
[virtual] Expansion ROM at f2000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: sky2
06:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5001 Wireless Network Adapter [168c:001c] (rev 04)
Subsystem: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01) [168c:3067]
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fa000000 (64-bit, non-prefetchable) [disabled] [size=64K]
Capabilities: <access denied>
** USB devices:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 05c8:0103 Cheng Uei Precision Industry Co., Ltd (Foxlink) FO13FF-65 PC-CAM
Bus 001 Device 002: ID 05e3:0715 Genesys Logic, Inc. USB 2.0 microSD Reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (990, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-trunk-686 (SMP w/2 CPU cores)
Locale: LANG=en_DK.UTF-8, LC_CTYPE=en_DK.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-trunk-686 depends on:
ii debconf [debconf-2.0] 1.5.28 Debian configuration management sy
ii initramfs-tools [linux-initr 0.93.4 tools for generating an initramfs
ii module-init-tools 3.12~pre1-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-trunk-686 recommends:
ii firmware-linux-free 2.6.32-6 Binary firmware for various driver
ii libc6-i686 2.10.2-5 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.32-trunk-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-trunk-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
ii firmware-ralink 0.22 Binary firmware for Ralink RT2561,
-- debconf information:
linux-image-2.6.32-trunk-686/postinst/bootloader-test-error-2.6.32-trunk-686:
linux-image-2.6.32-trunk-686/postinst/missing-firmware-2.6.32-trunk-686:
linux-image-2.6.32-trunk-686/prerm/would-invalidate-boot-loader-2.6.32-trunk-686: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-trunk-686/postinst/depmod-error-initrd-2.6.32-trunk-686: false
linux-image-2.6.32-trunk-686/prerm/removing-running-kernel-2.6.32-trunk-686: true
linux-image-2.6.32-trunk-686/postinst/bootloader-error-2.6.32-trunk-686:
Reply to: