--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: linux-image-2.6.31-1-amd64: switching to console disables tipping on touchpad kms enabled T400
- From: Simon Danner <danner.simon@googlemail.com>
- Date: Wed, 28 Oct 2009 11:49:13 +0100
- Message-id: <1256726953.10792.1.camel@localhost>
Package: linux-2.6
Version: 2.6.31-1
Severity: normal
Hi when i start the kernel with kms enabled and switch from the
x-server to a virtual console and back, tapping with my toucpad
doesn't work anymore and i have to reenable it.
-- Package-specific info:
** Version:
Linux version 2.6.31-1-amd64 (Debian 2.6.31-1) (waldi@debian.org) (gcc
version 4.3.4 (Debian 4.3.4-5) ) #1 SMP Sat Oct 24 17:50:31 UTC 2009
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.31-1-amd64 root=/dev/mapper/debian--simon-root
ro video=i915:modeset=1
** Not tainted
** Kernel log:
[ 8127.521569] i2c-adapter i2c-4: unable to read EDID block.
[ 8127.521572] i915 0000:00:02.0: DVI-D-2: no EDID data
[ 8127.526016] i2c-adapter i2c-4: unable to read EDID block.
[ 8127.526019] i915 0000:00:02.0: DVI-D-2: no EDID data
[ 8453.048560] i2c-adapter i2c-2: unable to read EDID block.
[ 8453.048566] i915 0000:00:02.0: DVI-D-1: no EDID data
[ 8453.112552] i2c-adapter i2c-2: unable to read EDID block.
[ 8453.112557] i915 0000:00:02.0: DVI-D-1: no EDID data
[ 8453.123029] i2c-adapter i2c-4: unable to read EDID block.
[ 8453.123035] i915 0000:00:02.0: DVI-D-2: no EDID data
[ 8453.127844] i2c-adapter i2c-4: unable to read EDID block.
[ 8453.127848] i915 0000:00:02.0: DVI-D-2: no EDID data
[ 8590.848550] i2c-adapter i2c-2: unable to read EDID block.
[ 8590.848556] i915 0000:00:02.0: DVI-D-1: no EDID data
[ 8590.912549] i2c-adapter i2c-2: unable to read EDID block.
[ 8590.912552] i915 0000:00:02.0: DVI-D-1: no EDID data
[ 8590.922105] i2c-adapter i2c-4: unable to read EDID block.
[ 8590.922108] i915 0000:00:02.0: DVI-D-2: no EDID data
[ 8590.926585] i2c-adapter i2c-4: unable to read EDID block.
[ 8590.926588] i915 0000:00:02.0: DVI-D-2: no EDID data
[ 8594.444549] i2c-adapter i2c-2: unable to read EDID block.
[ 8594.444553] i915 0000:00:02.0: DVI-D-1: no EDID data
[ 8594.508547] i2c-adapter i2c-2: unable to read EDID block.
[ 8594.508550] i915 0000:00:02.0: DVI-D-1: no EDID data
[ 8594.518082] i2c-adapter i2c-4: unable to read EDID block.
[ 8594.518085] i915 0000:00:02.0: DVI-D-2: no EDID data
[ 8594.522573] i2c-adapter i2c-4: unable to read EDID block.
[ 8594.522576] i915 0000:00:02.0: DVI-D-2: no EDID data
[ 8816.744548] i2c-adapter i2c-2: unable to read EDID block.
[ 8816.744553] i915 0000:00:02.0: DVI-D-1: no EDID data
[ 8816.808549] i2c-adapter i2c-2: unable to read EDID block.
[ 8816.808552] i915 0000:00:02.0: DVI-D-1: no EDID data
[ 8816.817996] i2c-adapter i2c-4: unable to read EDID block.
[ 8816.817998] i915 0000:00:02.0: DVI-D-2: no EDID data
[ 8816.822412] i2c-adapter i2c-4: unable to read EDID block.
[ 8816.822415] i915 0000:00:02.0: DVI-D-2: no EDID data
[ 8926.832051] i2c-adapter i2c-2: unable to read EDID block.
[ 8926.832056] i915 0000:00:02.0: DVI-D-1: no EDID data
[ 8926.896048] i2c-adapter i2c-2: unable to read EDID block.
[ 8926.896051] i915 0000:00:02.0: DVI-D-1: no EDID data
[ 8926.905585] i2c-adapter i2c-4: unable to read EDID block.
[ 8926.905588] i915 0000:00:02.0: DVI-D-2: no EDID data
[ 8926.910036] i2c-adapter i2c-4: unable to read EDID block.
[ 8926.910039] i915 0000:00:02.0: DVI-D-2: no EDID data
[ 8981.548051] i2c-adapter i2c-2: unable to read EDID block.
[ 8981.548057] i915 0000:00:02.0: DVI-D-1: no EDID data
[ 8981.612049] i2c-adapter i2c-2: unable to read EDID block.
[ 8981.612054] i915 0000:00:02.0: DVI-D-1: no EDID data
[ 8981.621685] i2c-adapter i2c-4: unable to read EDID block.
[ 8981.621688] i915 0000:00:02.0: DVI-D-2: no EDID data
[ 8981.626164] i2c-adapter i2c-4: unable to read EDID block.
[ 8981.626167] i915 0000:00:02.0: DVI-D-2: no EDID data
[ 9698.000054] i2c-adapter i2c-2: unable to read EDID block.
[ 9698.000058] i915 0000:00:02.0: DVI-D-1: no EDID data
[ 9698.064049] i2c-adapter i2c-2: unable to read EDID block.
[ 9698.064052] i915 0000:00:02.0: DVI-D-1: no EDID data
[ 9698.073642] i2c-adapter i2c-4: unable to read EDID block.
[ 9698.073645] i915 0000:00:02.0: DVI-D-2: no EDID data
[ 9698.078153] i2c-adapter i2c-4: unable to read EDID block.
[ 9698.078156] i915 0000:00:02.0: DVI-D-2: no EDID data
[ 9817.260549] i2c-adapter i2c-2: unable to read EDID block.
[ 9817.260553] i915 0000:00:02.0: DVI-D-1: no EDID data
[ 9817.324546] i2c-adapter i2c-2: unable to read EDID block.
[ 9817.324549] i915 0000:00:02.0: DVI-D-1: no EDID data
[ 9817.334459] i2c-adapter i2c-4: unable to read EDID block.
[ 9817.334463] i915 0000:00:02.0: DVI-D-2: no EDID data
[ 9817.338879] i2c-adapter i2c-4: unable to read EDID block.
[ 9817.338881] i915 0000:00:02.0: DVI-D-2: no EDID data
[ 9934.592590] i2c-adapter i2c-2: unable to read EDID block.
[ 9934.592595] i915 0000:00:02.0: DVI-D-1: no EDID data
[ 9934.656551] i2c-adapter i2c-2: unable to read EDID block.
[ 9934.656556] i915 0000:00:02.0: DVI-D-1: no EDID data
[ 9934.666263] i2c-adapter i2c-4: unable to read EDID block.
[ 9934.666267] i915 0000:00:02.0: DVI-D-2: no EDID data
[ 9934.670801] i2c-adapter i2c-4: unable to read EDID block.
[ 9934.670804] i915 0000:00:02.0: DVI-D-2: no EDID data
[ 9990.976551] i2c-adapter i2c-2: unable to read EDID block.
[ 9990.976556] i915 0000:00:02.0: DVI-D-1: no EDID data
[ 9991.040551] i2c-adapter i2c-2: unable to read EDID block.
[ 9991.040555] i915 0000:00:02.0: DVI-D-1: no EDID data
[ 9991.050177] i2c-adapter i2c-4: unable to read EDID block.
[ 9991.050180] i915 0000:00:02.0: DVI-D-2: no EDID data
[ 9991.054707] i2c-adapter i2c-4: unable to read EDID block.
[ 9991.054709] i915 0000:00:02.0: DVI-D-2: no EDID data
[10129.748053] i2c-adapter i2c-2: unable to read EDID block.
[10129.748059] i915 0000:00:02.0: DVI-D-1: no EDID data
[10129.812052] i2c-adapter i2c-2: unable to read EDID block.
[10129.812057] i915 0000:00:02.0: DVI-D-1: no EDID data
[10129.821636] i2c-adapter i2c-4: unable to read EDID block.
[10129.821639] i915 0000:00:02.0: DVI-D-2: no EDID data
[10129.826132] i2c-adapter i2c-4: unable to read EDID block.
[10129.826135] i915 0000:00:02.0: DVI-D-2: no EDID data
[10417.216551] i2c-adapter i2c-2: unable to read EDID block.
[10417.216556] i915 0000:00:02.0: DVI-D-1: no EDID data
[10417.280553] i2c-adapter i2c-2: unable to read EDID block.
[10417.280558] i915 0000:00:02.0: DVI-D-1: no EDID data
[10417.290308] i2c-adapter i2c-4: unable to read EDID block.
[10417.290311] i915 0000:00:02.0: DVI-D-2: no EDID data
[10417.294873] i2c-adapter i2c-4: unable to read EDID block.
[10417.294876] i915 0000:00:02.0: DVI-D-2: no EDID data
** Model information
sys_vendor: LENOVO
product_name: 6473P1U
product_version: ThinkPad T400
chassis_vendor: LENOVO
chassis_version: Not Available
bios_vendor: LENOVO
bios_version: 7UET48WW (1.18 )
board_vendor: LENOVO
board_name: 6473P1U
board_version: Not Available
** Loaded modules:
Module Size Used by
snd_seq_dummy 3444 0
ipt_MASQUERADE 3184 1
iptable_nat 6976 1
nf_nat 21700 2 ipt_MASQUERADE,iptable_nat
nf_conntrack_ipv4 16824 4 iptable_nat,nf_nat
nf_defrag_ipv4 2496 1 nf_conntrack_ipv4
xt_state 2640 1
nf_conntrack 78496 5
ipt_MASQUERADE,iptable_nat,nf_nat,nf_conntrack_ipv4,xt_state
ipt_REJECT 3440 2
xt_tcpudp 3616 4
iptable_filter 4128 1
ip_tables 18640 2 iptable_nat,iptable_filter
x_tables 25512 6
ipt_MASQUERADE,iptable_nat,xt_state,ipt_REJECT,xt_tcpudp,ip_tables
bridge 56288 0
stp 3060 1 bridge
ppdev 7720 0
lp 11492 0
parport 41200 2 ppdev,lp
microcode 26376 0
cpufreq_conservative 8624 0
binfmt_misc 9900 1
kvm_intel 50888 0
kvm 179112 1 kvm_intel
ext2 69040 1
coretemp 7152 0
cpufreq_userspace 3940 0
cpufreq_stats 5092 0
cpufreq_powersave 1952 0
acpi_cpufreq 9520 0
loop 17404 0
firewire_sbp2 17040 0
snd_hda_codec_conexant 24576 1
snd_hda_intel 29128 5
snd_hda_codec 83920 2 snd_hda_codec_conexant,snd_hda_intel
snd_hwdep 9288 1 snd_hda_codec
snd_pcm_oss 40832 0
snd_mixer_oss 16528 1 snd_pcm_oss
arc4 2256 2
snd_pcm 89240 4 snd_hda_intel,snd_hda_codec,snd_pcm_oss
ecb 3520 2
snd_seq_midi 7536 0
joydev 11872 0
snd_rawmidi 25424 1 snd_seq_midi
snd_seq_midi_event 8752 1 snd_seq_midi
iwlagn 95680 0
snd_seq 58528 3
snd_seq_dummy,snd_seq_midi,snd_seq_midi_event
iwlcore 121552 1 iwlagn
snd_timer 23888 2 snd_pcm,snd_seq
snd_seq_device 8324 4
snd_seq_dummy,snd_seq_midi,snd_rawmidi,snd_seq
snd 71608 20
snd_hda_codec_conexant,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
mac80211 157456 2 iwlagn,iwlcore
soundcore 8816 1 snd
snd_page_alloc 10768 2 snd_hda_intel,snd_pcm
psmouse 46172 0
thinkpad_acpi 73084 0
serio_raw 6564 0
led_class 5528 2 iwlcore,thinkpad_acpi
i2c_i801 10896 0
cfg80211 98600 3 iwlagn,iwlcore,mac80211
rfkill 23544 2 thinkpad_acpi,cfg80211
evdev 11504 21
wmi 8144 0
nvram 8828 1 thinkpad_acpi
button 7072 0
battery 8288 0
ac 4128 0
processor 43164 3 acpi_cpufreq
ext3 133616 2
jbd 53624 1 ext3
mbcache 9524 2 ext2,ext3
sha256_generic 9808 0
cryptd 8744 0
aes_x86_64 9232 3
aes_generic 28128 1 aes_x86_64
cbc 4224 1
dm_crypt 14600 1
dm_mod 78248 12 dm_crypt
sg 25688 3
sd_mod 37608 3
sr_mod 17412 0
cdrom 36200 1 sr_mod
crc_t10dif 2208 1 sd_mod
uhci_hcd 24048 0
ahci 41552 4
firewire_ohci 24644 0
firewire_core 54392 2 firewire_sbp2,firewire_ohci
crc_itu_t 2432 1 firewire_core
libata 191148 1 ahci
scsi_mod 173200 5 firewire_sbp2,sg,sd_mod,sr_mod,libata
ehci_hcd 37600 0
e1000e 134016 0
thermal 17376 0
fan 5768 0
i915 226264 3
drm 191776 3 i915
i2c_algo_bit 6708 1 i915
i2c_core 26768 4 i2c_i801,i915,drm,i2c_algo_bit
video 24156 1 i915
thermal_sys 17936 4 processor,thermal,fan,video
output 3840 1 video
intel_agp 31936 1
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset
Memory Controller Hub [8086:2a40] (rev 07)
Subsystem: Lenovo Device [17aa:20e0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4
Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07)
(prog-if 00 [VGA controller])
Subsystem: Lenovo Device [17aa:20e4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 28
Region 0: Memory at f4400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 1800 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series
Chipset Integrated Graphics Controller [8086:2a43] (rev 07)
Subsystem: Lenovo Device [17aa:20e4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f4200000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:03.0 Communication controller [0780]: Intel Corporation Mobile 4
Series Chipset MEI Controller [8086:2a44] (rev 07)
Subsystem: Lenovo Device [17aa:20e6]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fc226800 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM Gigabit
Network Connection [8086:10f5] (rev 03)
Subsystem: Lenovo Device [17aa:20ee]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 29
Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fc025000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 1840 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device [17aa:20f0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 1860 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device [17aa:20f0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 1880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device [17aa:20f0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 18a0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:20f1]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at fc226c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD
Audio Controller [8086:293e] (rev 03)
Subsystem: Lenovo Device [17aa:20f2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fc020000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI
Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI
Express Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: f4300000-f43fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI
Express Port 4 [8086:2946] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=0c, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f8000000-f9ffffff
Prefetchable memory behind bridge: 00000000f4000000-00000000f40fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI
Express Port 5 [8086:2948] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0d, subordinate=14, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: fa000000-fbffffff
Prefetchable memory behind bridge: 00000000f4100000-00000000f41fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device [17aa:20f0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 18c0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device [17aa:20f0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 18e0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device [17aa:20f0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 1c00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:20f1]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 0: Memory at fc227000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=15, subordinate=18, sec-latency=32
I/O behind bridge: 00004000-00007fff
Memory behind bridge: f4800000-f7ffffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f3ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M-E LPC Interface
Controller [8086:2917] (rev 03)
Subsystem: Lenovo Device [17aa:20f5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation ICH9M/M-E SATA AHCI
Controller [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Lenovo Device [17aa:20f8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 30
Region 0: I/O ports at 1c48 [size=8]
Region 1: I/O ports at 183c [size=4]
Region 2: I/O ports at 1c40 [size=8]
Region 3: I/O ports at 1838 [size=4]
Region 4: I/O ports at 1c20 [size=32]
Region 5: Memory at fc226000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus
Controller [8086:2930] (rev 03)
Subsystem: Lenovo Device [17aa:20f9]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fc227400 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1c60 [size=32]
Kernel driver in use: i801_smbus
03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 5100
AGN [Shiloh] Network Connection [8086:4237]
Subsystem: Intel Corporation Device [8086:1211]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 31
Region 0: Memory at f4300000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlagn
15:00.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev
ba)
Subsystem: Lenovo Device [17aa:20c6]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f4800000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=15, secondary=16, subordinate=17, sec-latency=176
Memory window 0: f0000000-f3fff000 (prefetchable)
Memory window 1: 80000000-83fff000 (prefetchable)
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
15:00.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394
Controller [1180:0832] (rev 04) (prog-if 10 [OHCI])
Subsystem: Lenovo Device [17aa:20c7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f4801000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (990, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.31-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.31-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.28 Debian configuration
management sy
ii initramfs-tools [linux-initra 0.93.4 tools for generating an
initramfs
ii module-init-tools 3.11-1 tools for managing Linux
kernel mo
Versions of packages linux-image-2.6.31-1-amd64 recommends:
ii firmware-linux-free 2.6.31-1 Binary firmware for various
driver
Versions of packages linux-image-2.6.31-1-amd64 suggests:
ii grub 0.97-59 GRand Unified Bootloader
(dummy pa
pn linux-doc-2.6.31 <none> (no description available)
Versions of packages linux-image-2.6.31-1-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
ii firmware-iwlwifi 0.21 Binary firmware for Intel
Wireless
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
-- debconf information:
linux-image-2.6.31-1-amd64/prerm/removing-running-kernel-2.6.31-1-amd64:
true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.31-1-amd64/postinst/depmod-error-initrd-2.6.31-1-amd64:
false
* linux-image-2.6.31-1-amd64/postinst/missing-firmware-2.6.31-1-amd64:
linux-image-2.6.31-1-amd64/prerm/would-invalidate-boot-loader-2.6.31-1-amd64: true
linux-image-2.6.31-1-amd64/postinst/bootloader-test-error-2.6.31-1-amd64:
linux-image-2.6.31-1-amd64/postinst/bootloader-error-2.6.31-1-amd64:
--- End Message ---