Package: linux-2.6
Version: 2.6.32-5
-------- Forwarded Message --------
From: Панов алекс <q0w1e2r3t4y5@yandex.ru>
To: debian-kernel@lists.debian.org
Subject: Kernel2.6.32-5-ADSL connection does not work
Date: Sat, 30 Jan 2010 11:47:12 +0300
System-Debian Squeeze (testing).Kernel from an adjusting disk -
2.6.30.Has adjusted ADSL-connection with the help pppoeconf (usb-modem
ZTE ZXDSL 831 series {without problems is supported by kernels, since
2.6.25}).Далее it was updated (aptitude update, aptitude upgrade). The
new kernel 2.6.32-5 was established.Has rebooted from it, all quickly,
well, but Internet connection is not present. Command ifconfig-a has
found the modem. But pppoeconf has told that is not found
ethernet-concentrators (though in the list eth which pppoeconf deduces
the first and whether asks all it has found, my interface eth1 was
present). Now I sit from 2.6.30 kernels, I do not know what to do, I
face this problem for the first time. (In 2.6.30 all works
remarkably...)
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.30-2-686 (Debian 2.6.30-8squeeze1) (dannf@debian.org) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Fri Dec 4 00:53:20 UTC 2009
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001ffc0000 (usable)
[ 0.000000] BIOS-e820: 000000001ffc0000 - 000000001ffcf000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001ffcf000 - 0000000020000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x1ffc0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] init_memory_mapping: 0000000000000000-000000001ffc0000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 001fc00000 page 2M
[ 0.000000] 001fc00000 - 001ffc0000 page 4k
[ 0.000000] kernel direct mapping tables up to 1ffc0000 @ 10000-15000
[ 0.000000] RAMDISK: 1791d000 - 1800fa1e
[ 0.000000] ACPI: RSDP 000f6990 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 1ffc0000 00038 (v01 A M I OEMRSDT 11000507 MSFT 00000097)
[ 0.000000] ACPI: FACP 1ffc0200 00084 (v02 A M I OEMFACP 11000507 MSFT 00000097)
[ 0.000000] ACPI: DSDT 1ffc0430 089E6 (v01 0AAAA 0AAAA000 00000000 INTL 02002026)
[ 0.000000] ACPI: FACS 1ffcf000 00040
[ 0.000000] ACPI: APIC 1ffc0390 00054 (v01 A M I OEMAPIC 11000507 MSFT 00000097)
[ 0.000000] ACPI: MCFG 1ffc03f0 0003C (v01 A M I OEMMCFG 11000507 MSFT 00000097)
[ 0.000000] ACPI: OEMB 1ffcf040 00040 (v01 A M I AMI_OEM 11000507 MSFT 00000097)
[ 0.000000] ACPI: SSDT 1ffc8e20 002D2 (v01 AMI CPU1PM 00000001 INTL 02002026)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1ffc0000
[ 0.000000] low ram: 0 - 1ffc0000
[ 0.000000] node 0 low ram: 00000000 - 1ffc0000
[ 0.000000] node 0 bootmap 00011000 - 00014ff8
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001ffc0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 000053fb10] TEXT DATA BSS ==> [0000100000 - 000053fb10]
[ 0.000000] #4 [001791d000 - 001800fa1e] RAMDISK ==> [001791d000 - 001800fa1e]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #6 [0000540000 - 0000542215] BRK ==> [0000540000 - 0000542215]
[ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #8 [0000011000 - 0000015000] BOOTMAP ==> [0000011000 - 0000015000]
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001ffc0
[ 0.000000] HighMem 0x0001ffc0 -> 0x0001ffc0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0001ffc0
[ 0.000000] On node 0 totalpages: 130895
[ 0.000000] free_area_init_node: node 0, pgdat c0408d40, node_mem_map c1000200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 125920 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:ded14000)
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 11 pages at c1402000, static data 22172 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129871
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.30-2-686 root=UUID=3aeef3e1-dad7-402a-b446-9a57c81c8407 ro quiet
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] NR_IRQS:1280
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1728.854 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.004000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.004000] Memory: 507160k/524032k available (2174k kernel code, 16052k reserved, 1138k data, 320k init, 0k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffe16000 - 0xfffff000 (1956 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xe07c0000 - 0xff7fe000 ( 496 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xdffc0000 ( 511 MB)
[ 0.004000] .init : 0xc0444000 - 0xc0494000 ( 320 kB)
[ 0.004000] .data : 0xc031f865 - 0xc043c2f0 (1138 kB)
[ 0.004000] .text : 0xc0100000 - 0xc031f865 (2174 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3457.70 BogoMIPS (lpj=6915416)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys devices
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] Initializing cgroup subsys net_cls
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] Intel machine check architecture supported.
[ 0.004000] Intel machine check reporting enabled on CPU#0.
[ 0.004000] Checking 'hlt' instruction... OK.
[ 0.016320] SMP alternatives: switching to UP code
[ 0.019632] Freeing SMP alternatives: 12k freed
[ 0.019640] ACPI: Core revision 20090320
[ 0.036438] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.077056] CPU0: Intel(R) Pentium(R) M processor 1.73GHz stepping 08
[ 0.080001] APIC calibration not consistent with PM-Timer: 96ms instead of 100ms
[ 0.080001] APIC delta adjusted to PM-Timer: 831246 (802279)
[ 0.080001] Brought up 1 CPUs
[ 0.080001] Total of 1 processors activated (3457.70 BogoMIPS).
[ 0.080001] CPU0 attaching NULL sched-domain.
[ 0.080001] net_namespace: 1088 bytes
[ 0.080001] Booting paravirtualized kernel on bare hardware
[ 0.080001] regulator: core version 0.5
[ 0.080001] NET: Registered protocol family 16
[ 0.080001] ACPI: bus type pci registered
[ 0.080001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.080001] PCI: Not using MMCONFIG.
[ 0.080001] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3
[ 0.080001] PCI: Using configuration type 1 for base access
[ 0.080001] bio: create slab <bio-0> at 0
[ 0.080001] ACPI: EC: Look up EC in DSDT
[ 0.102886] ACPI: Interpreter enabled
[ 0.102897] ACPI: (supports S0 S3 S4 S5)
[ 0.102923] ACPI: Using IOAPIC for interrupt routing
[ 0.103014] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.107563] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.107566] PCI: Using MMCONFIG for extended config space
[ 0.117734] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.117737] ACPI: EC: driver started in poll mode
[ 0.117841] ACPI: Power Resource [GFAN] (off)
[ 0.118089] ACPI: No dock devices found.
[ 0.118192] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.118312] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.118316] pci 0000:00:01.0: PME# disabled
[ 0.118393] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfebf8000-0xfebfbfff]
[ 0.118443] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.118448] pci 0000:00:1b.0: PME# disabled
[ 0.118498] pci 0000:00:1d.0: reg 20 io port: [0xe480-0xe49f]
[ 0.118555] pci 0000:00:1d.1: reg 20 io port: [0xe800-0xe81f]
[ 0.118612] pci 0000:00:1d.2: reg 20 io port: [0xe880-0xe89f]
[ 0.118668] pci 0000:00:1d.3: reg 20 io port: [0xec00-0xec1f]
[ 0.118730] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfebffc00-0xfebfffff]
[ 0.118788] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.118793] pci 0000:00:1d.7: PME# disabled
[ 0.118920] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.118927] pci 0000:00:1f.0: Enabled ICH6/i801 SMBus device
[ 0.118933] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.118938] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.118943] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0280-02ff
[ 0.118948] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 0a00-0a0f
[ 0.118975] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.118983] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.118991] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.118999] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.119007] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
[ 0.119075] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.119130] pci 0000:03:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
[ 0.119139] pci 0000:03:00.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff]
[ 0.119148] pci 0000:03:00.0: reg 1c 64bit mmio: [0xfc000000-0xfcffffff]
[ 0.119157] pci 0000:03:00.0: reg 30 32bit mmio: [0xfeae0000-0xfeafffff]
[ 0.119218] pci 0000:00:01.0: bridge 32bit mmio: [0xfaa00000-0xfeafffff]
[ 0.119223] pci 0000:00:01.0: bridge 32bit mmio pref: [0xbfe00000-0xdfefffff]
[ 0.119271] pci 0000:01:00.0: reg 10 32bit mmio: [0xfa9f8000-0xfa9fbfff]
[ 0.119280] pci 0000:01:00.0: reg 14 io port: [0xd800-0xd8ff]
[ 0.119311] pci 0000:01:00.0: reg 30 32bit mmio: [0xfa9c0000-0xfa9dffff]
[ 0.119339] pci 0000:01:00.0: supports D1 D2
[ 0.119341] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.119347] pci 0000:01:00.0: PME# disabled
[ 0.119388] pci 0000:01:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.119410] pci 0000:01:01.0: supports D1 D2
[ 0.119412] pci 0000:01:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.119418] pci 0000:01:01.0: PME# disabled
[ 0.119457] pci 0000:01:01.1: reg 10 32bit mmio: [0xfa9fe000-0xfa9fe7ff]
[ 0.119511] pci 0000:01:01.1: PME# supported from D0 D3hot D3cold
[ 0.119517] pci 0000:01:01.1: PME# disabled
[ 0.119556] pci 0000:01:01.2: reg 10 32bit mmio: [0xfa9fe800-0xfa9fe8ff]
[ 0.119610] pci 0000:01:01.2: supports D1 D2
[ 0.119612] pci 0000:01:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.119618] pci 0000:01:01.2: PME# disabled
[ 0.119656] pci 0000:01:01.3: reg 10 32bit mmio: [0xfa9fec00-0xfa9fecff]
[ 0.119710] pci 0000:01:01.3: supports D1 D2
[ 0.119713] pci 0000:01:01.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.119718] pci 0000:01:01.3: PME# disabled
[ 0.119766] pci 0000:01:03.0: reg 10 32bit mmio: [0xfa9ff000-0xfa9fffff]
[ 0.119823] pci 0000:01:03.0: PME# supported from D0 D3hot D3cold
[ 0.119828] pci 0000:01:03.0: PME# disabled
[ 0.119875] pci 0000:00:1e.0: transparent bridge
[ 0.119881] pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff]
[ 0.119886] pci 0000:00:1e.0: bridge 32bit mmio: [0xfa900000-0xfa9fffff]
[ 0.119918] pci_bus 0000:00: on NUMA node 0
[ 0.119928] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.120139] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.120306] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 0.125249] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12)
[ 0.125442] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 12) *11
[ 0.125633] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 12)
[ 0.125824] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 12)
[ 0.126013] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 12)
[ 0.126203] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 12) *0, disabled.
[ 0.126394] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 12)
[ 0.126583] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 12)
[ 0.126890] PCI: Using ACPI for IRQ routing
[ 0.127220] hpet clockevent registered
[ 0.127224] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.127231] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.127237] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.132083] pnp: PnP ACPI init
[ 0.132091] ACPI: bus type pnp registered
[ 0.136264] pnp: PnP ACPI: found 14 devices
[ 0.136267] ACPI: ACPI bus type pnp unregistered
[ 0.136272] PnPBIOS: Disabled by ACPI PNP
[ 0.136286] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[ 0.136289] system 00:09: ioport range 0x800-0x87f has been reserved
[ 0.136293] system 00:09: ioport range 0x400-0x41f has been reserved
[ 0.136297] system 00:09: ioport range 0x480-0x4bf has been reserved
[ 0.136301] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.136305] system 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.136309] system 00:09: iomem range 0xffb00000-0xffbfffff could not be reserved
[ 0.136315] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.136319] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.136325] system 00:0b: ioport range 0xa00-0xa0f has been reserved
[ 0.136331] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.136337] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.136341] system 00:0d: iomem range 0xc0000-0xcffff could not be reserved
[ 0.136345] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 0.136349] system 00:0d: iomem range 0x100000-0x1fffffff could not be reserved
[ 0.136353] system 00:0d: iomem range 0xfec00001-0xffffffff could not be reserved
[ 0.171800] pci 0000:00:01.0: PCI bridge, secondary bus 0000:03
[ 0.171803] pci 0000:00:01.0: IO window: disabled
[ 0.171807] pci 0000:00:01.0: MEM window: 0xfaa00000-0xfeafffff
[ 0.171812] pci 0000:00:01.0: PREFETCH window: 0x000000bfe00000-0x000000dfefffff
[ 0.171823] pci 0000:01:01.0: CardBus bridge, secondary bus 0000:02
[ 0.171826] pci 0000:01:01.0: IO window: 0x00d000-0x00d0ff
[ 0.171832] pci 0000:01:01.0: IO window: 0x00d400-0x00d4ff
[ 0.171837] pci 0000:01:01.0: PREFETCH window: 0x30000000-0x33ffffff
[ 0.171843] pci 0000:01:01.0: MEM window: 0x38000000-0x3bffffff
[ 0.171848] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[ 0.171852] pci 0000:00:1e.0: IO window: 0xd000-0xdfff
[ 0.171858] pci 0000:00:1e.0: MEM window: 0xfa900000-0xfa9fffff
[ 0.171863] pci 0000:00:1e.0: PREFETCH window: 0x00000030000000-0x00000035ffffff
[ 0.171879] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.171883] pci 0000:00:01.0: setting latency timer to 64
[ 0.171890] pci 0000:00:1e.0: setting latency timer to 64
[ 0.171900] pci 0000:01:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.171907] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.171910] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.171914] pci_bus 0000:03: resource 1 mem: [0xfaa00000-0xfeafffff]
[ 0.171917] pci_bus 0000:03: resource 2 pref mem [0xbfe00000-0xdfefffff]
[ 0.171920] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff]
[ 0.171923] pci_bus 0000:01: resource 1 mem: [0xfa900000-0xfa9fffff]
[ 0.171927] pci_bus 0000:01: resource 2 pref mem [0x30000000-0x35ffffff]
[ 0.171930] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.171933] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
[ 0.171936] pci_bus 0000:02: resource 0 io: [0xd000-0xd0ff]
[ 0.171939] pci_bus 0000:02: resource 1 io: [0xd400-0xd4ff]
[ 0.171943] pci_bus 0000:02: resource 2 pref mem [0x30000000-0x33ffffff]
[ 0.171946] pci_bus 0000:02: resource 3 mem: [0x38000000-0x3bffffff]
[ 0.171986] NET: Registered protocol family 2
[ 0.172086] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.172352] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.172449] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.172544] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.172547] TCP reno registered
[ 0.172616] NET: Registered protocol family 1
[ 0.172661] Trying to unpack rootfs image as initramfs...
[ 0.422928] Freeing initrd memory: 7114k freed
[ 0.453428] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.453925] audit: initializing netlink socket (disabled)
[ 0.453944] type=2000 audit(1264755510.452:1): initialized
[ 0.454123] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.454188] VFS: Disk quotas dquot_6.5.2
[ 0.454223] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.454281] msgmni has been set to 1005
[ 0.454432] alg: No test for stdrng (krng)
[ 0.454493] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.454497] io scheduler noop registered
[ 0.454499] io scheduler anticipatory registered
[ 0.454501] io scheduler deadline registered
[ 0.454515] io scheduler cfq registered (default)
[ 0.454628] pci 0000:03:00.0: Boot video device
[ 0.454772] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.454782] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 0.455131] isapnp: Scanning for PnP cards...
[ 0.628035] Switched to high resolution mode on CPU 0
[ 0.809082] isapnp: No Plug & Play device found
[ 0.815698] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.815878] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.817948] brd: module loaded
[ 0.818043] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.820557] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.821749] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.821755] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.821759] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.821762] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.821765] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.821915] mice: PS/2 mouse device common for all mice
[ 0.822015] rtc_cmos 00:02: RTC can wake from S4
[ 0.822142] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.822171] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.822208] cpuidle: using governor ladder
[ 0.822210] cpuidle: using governor menu
[ 0.822215] No iBFT detected.
[ 0.822584] TCP cubic registered
[ 0.822625] NET: Registered protocol family 10
[ 0.823079] lo: Disabled Privacy Extensions
[ 0.823383] Mobile IPv6
[ 0.823386] NET: Registered protocol family 17
[ 0.823395] Using IPI No-Shortcut mode
[ 0.823531] registered taskstats version 1
[ 0.823660] rtc_cmos 00:02: setting system clock to 2010-01-29 08:58:31 UTC (1264755511)
[ 0.823711] Freeing unused kernel memory: 320k freed
[ 0.823907] Write protecting the kernel text: 2176k
[ 0.823926] Write protecting the kernel read-only data: 772k
[ 0.929327] fan PNP0C0B:00: registered as cooling_device0
[ 0.929334] ACPI: Fan [FN00] (off)
[ 0.940953] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.089036] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.089045] ACPI: Thermal Zone [THRM] (48 C)
[ 1.122850] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:26/device:27/input/input1
[ 1.122860] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 1.135498] Linux agpgart interface v0.103
[ 1.167268] Uniform Multi-Platform E-IDE driver
[ 1.197788] piix 0000:00:1f.1: IDE controller (0x8086:0x266f rev 0x04)
[ 1.197809] PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.197832] piix 0000:00:1f.1: not 100% native mode: will probe irqs later
[ 1.197839] ide0: BM-DMA at 0xffa0-0xffa7
[ 1.197846] ide1: BM-DMA at 0xffa8-0xffaf
[ 1.197852] Probing IDE interface ide0...
[ 1.218174] skge 0000:01:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.218217] skge 1.13 addr 0xfa9f8000 irq 20 chip Yukon-Lite rev 9
[ 1.218855] skge eth0: addr 00:15:f2:e8:57:f0
[ 1.247861] firewire_ohci 0000:01:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 1.252449] usbcore: registered new interface driver usbfs
[ 1.252483] usbcore: registered new interface driver hub
[ 1.252521] usbcore: registered new device driver usb
[ 1.256760] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.285964] sdhci: Secure Digital Host Controller Interface driver
[ 1.285967] sdhci: Copyright(c) Pierre Ossman
[ 1.324008] firewire_ohci: Added fw-ohci device 0000:01:01.1, OHCI version 1.0
[ 1.324176] sdhci-pci 0000:01:01.2: SDHCI controller found [1180:0822] (rev 17)
[ 1.324201] sdhci-pci 0000:01:01.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 1.326254] Registered led device: mmc0::
[ 1.327277] mmc0: SDHCI controller on PCI [0000:01:01.2] using PIO
[ 1.492232] hda: FUJITSU MHV2060AT PL, ATA DISK drive
[ 1.824074] firewire_core: created device fw0: GUID 00e01800034fe27f, S400
[ 1.996007] hdb: MATSHITADVD-RAM UJ-841S, ATAPI CD/DVD-ROM drive
[ 1.996041] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 2.000006] hda: UDMA/100 mode selected
[ 2.003575] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 2.003891] hdb: UDMA/33 mode selected
[ 2.004300] Probing IDE interface ide1...
[ 2.572045] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 2.611261] ide1 at 0x170-0x177,0x376 on irq 15
[ 2.611393] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.611412] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.611416] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.611452] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.615376] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.615382] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.615397] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebffc00
[ 2.637575] SCSI subsystem initialized
[ 2.637921] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.637960] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.637964] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.637967] usb usb1: Product: EHCI Host Controller
[ 2.637970] usb usb1: Manufacturer: Linux 2.6.30-2-686 ehci_hcd
[ 2.637973] usb usb1: SerialNumber: 0000:00:1d.7
[ 2.638037] usb usb1: configuration #1 chosen from 1 choice
[ 2.638068] hub 1-0:1.0: USB hub found
[ 2.638077] hub 1-0:1.0: 8 ports detected
[ 2.641925] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.641965] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.641975] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.641979] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.642004] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.642031] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e480
[ 2.642065] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.642068] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.642071] usb usb2: Product: UHCI Host Controller
[ 2.642074] usb usb2: Manufacturer: Linux 2.6.30-2-686 uhci_hcd
[ 2.642077] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.642129] usb usb2: configuration #1 chosen from 1 choice
[ 2.642160] hub 2-0:1.0: USB hub found
[ 2.642167] hub 2-0:1.0: 2 ports detected
[ 2.642260] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.642267] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.642270] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.642291] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.642315] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e800
[ 2.642350] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.642354] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.642357] usb usb3: Product: UHCI Host Controller
[ 2.642359] usb usb3: Manufacturer: Linux 2.6.30-2-686 uhci_hcd
[ 2.642362] usb usb3: SerialNumber: 0000:00:1d.1
[ 2.642409] usb usb3: configuration #1 chosen from 1 choice
[ 2.642437] hub 3-0:1.0: USB hub found
[ 2.642442] hub 3-0:1.0: 2 ports detected
[ 2.642540] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.642546] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.642550] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.642570] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.642594] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e880
[ 2.642625] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.642628] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.642631] usb usb4: Product: UHCI Host Controller
[ 2.642634] usb usb4: Manufacturer: Linux 2.6.30-2-686 uhci_hcd
[ 2.642636] usb usb4: SerialNumber: 0000:00:1d.2
[ 2.642681] usb usb4: configuration #1 chosen from 1 choice
[ 2.642711] hub 4-0:1.0: USB hub found
[ 2.642717] hub 4-0:1.0: 2 ports detected
[ 2.642806] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 2.642812] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.642816] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.642837] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.642871] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ec00
[ 2.642902] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.642905] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.642908] usb usb5: Product: UHCI Host Controller
[ 2.642911] usb usb5: Manufacturer: Linux 2.6.30-2-686 uhci_hcd
[ 2.642914] usb usb5: SerialNumber: 0000:00:1d.3
[ 2.642962] usb usb5: configuration #1 chosen from 1 choice
[ 2.642990] hub 5-0:1.0: USB hub found
[ 2.642996] hub 5-0:1.0: 2 ports detected
[ 2.669394] libata version 3.00 loaded.
[ 2.680498] ide-cd driver 5.00
[ 2.685827] ide-gd driver 1.18
[ 2.687128] ide-cd: hdb: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
[ 2.687135] Uniform CD-ROM driver Revision: 3.20
[ 2.701829] hda: max request size: 128KiB
[ 2.701978] hda: 117210240 sectors (60011 MB) w/8192KiB Cache, CHS=65535/16/63
[ 2.706718] hda: cache flushes supported
[ 2.706772] hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 hda9 > hda4
[ 3.116012] usb 1-5: new high speed USB device using ehci_hcd and address 4
[ 3.266365] usb 1-5: New USB device found, idVendor=0402, idProduct=5602
[ 3.266370] usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.266373] usb 1-5: Product: USB2.0 Camera
[ 3.266463] usb 1-5: configuration #1 chosen from 1 choice
[ 3.504010] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 3.681440] usb 3-1: New USB device found, idVendor=0a5c, idProduct=6300
[ 3.681444] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.681447] usb 3-1: Product: USB Network Interface
[ 3.681450] usb 3-1: Manufacturer: Broadcom Corporation
[ 3.681452] usb 3-1: SerialNumber: 0019c6c4515c
[ 3.681541] usb 3-1: configuration #2 chosen from 2 choices
[ 3.872149] PM: Starting manual resume from disk
[ 3.925023] EXT4-fs: barriers enabled
[ 3.928015] usb 3-2: new low speed USB device using uhci_hcd and address 3
[ 3.945569] kjournald2 starting: pid 591, dev hda4:8, commit interval 5 seconds
[ 3.945576] EXT4-fs: delayed allocation enabled
[ 3.945578] EXT4-fs: file extents enabled
[ 3.946782] EXT4-fs: mballoc enabled
[ 3.946795] EXT4-fs: mounted filesystem hda4 with ordered data mode
[ 4.103478] usb 3-2: New USB device found, idVendor=046d, idProduct=c016
[ 4.103482] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.103485] usb 3-2: Product: Optical USB Mouse
[ 4.103488] usb 3-2: Manufacturer: Logitech
[ 4.103587] usb 3-2: configuration #1 chosen from 1 choice
[ 5.636526] udev: starting version 150
[ 5.958560] Marking TSC unstable due to TSC halts in idle
[ 5.958609] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 5.958643] processor ACPI_CPU:00: registered as cooling_device1
[ 5.958648] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 5.990257] ACPI: AC Adapter [AC0] (on-line)
[ 5.997403] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 5.997411] ACPI: Power Button [PWRF]
[ 5.997486] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 5.997578] ACPI: Lid Switch [LID]
[ 5.997633] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 5.997642] ACPI: Sleep Button [SLPB]
[ 6.090530] ACPI: Battery Slot [BAT0] (battery present)
[ 6.124017] Clocksource tsc unstable (delta = -68218140 ns)
[ 6.444316] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 6.526019] parport_pc 00:08: reported by Plug and Play ACPI
[ 6.526046] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
[ 6.700270] asus-laptop: Asus Laptop Support version 0.42
[ 6.704020] asus-laptop: A6VM model detected
[ 6.707780] input: Asus Laptop extra buttons as /devices/virtual/input/input6
[ 6.707840] Registered led device: asus::mail
[ 6.814080] lib80211: common routines for IEEE802.11 drivers
[ 6.814084] lib80211_crypt: registered algorithm 'NULL'
[ 6.862336] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 6.862339] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 6.889581] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 6.889584] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 6.889652] ipw2200 0000:01:03.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 6.889871] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 6.889920] ipw2200 0000:01:03.0: firmware: requesting ipw2200-bss.fw
[ 6.961601] ipw2200: ipw2200-bss.fw request_firmware failed: Reason -2
[ 6.961682] ipw2200: Unable to load firmware: -2
[ 6.961744] ipw2200: failed to register network device
[ 6.961855] ipw2200 0000:01:03.0: PCI INT A disabled
[ 6.961864] ipw2200: probe of 0000:01:03.0 failed with error -5
[ 6.999988] usbcore: registered new interface driver hiddev
[ 7.013053] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input7
[ 7.013139] generic-usb 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.1-2/input0
[ 7.013154] usbcore: registered new interface driver usbhid
[ 7.013157] usbhid: v2.6:USB HID core driver
[ 7.118101] yenta_cardbus 0000:01:01.0: CardBus bridge found [1043:1177]
[ 7.199983] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
[ 7.236812] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[ 7.244827] yenta_cardbus 0000:01:01.0: ISA IRQ mask 0x0c38, PCI irq 17
[ 7.244832] yenta_cardbus 0000:01:01.0: Socket status: 30000006
[ 7.244838] yenta_cardbus 0000:01:01.0: pcmcia: parent PCI bridge I/O window: 0xd000 - 0xdfff
[ 7.244842] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xd000-0xdfff: clean.
[ 7.245062] yenta_cardbus 0000:01:01.0: pcmcia: parent PCI bridge Memory window: 0xfa900000 - 0xfa9fffff
[ 7.245066] yenta_cardbus 0000:01:01.0: pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x35ffffff
[ 7.539017] Linux video capture interface: v2.00
[ 7.562728] gspca: main v2.5.0 registered
[ 7.582664] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 8.066500] intel_rng: FWH not detected
[ 8.079278] eth1: register 'cdc_ether' at usb-0000:00:1d.1-1, CDC Ethernet Device, 00:19:c6:c4:51:5c
[ 8.079300] usbcore: registered new interface driver cdc_ether
[ 8.082884] gspca: probing 0402:5602
[ 8.082890] ALi m5602: Probing for a po1030 sensor
[ 8.110593] ALi m5602: Probing for a mt9m111 sensor
[ 8.124843] ALi m5602: Probing for a s5k4aa sensor
[ 8.147718] ALi m5602: Probing for an ov9650 sensor
[ 8.161968] ALi m5602: Detected an ov9650 sensor
[ 8.161975] ALi m5602: vflip quirk active
[ 8.256410] gspca: probe ok
[ 8.256435] usbcore: registered new interface driver ALi m5602
[ 8.256439] ALi m5602: registered
[ 8.298500] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 8.299931] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[ 8.300327] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 8.300617] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 8.301230] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 8.936574] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.936603] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 9.022621] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[ 9.629734] Adding 522072k swap on /dev/hda6. Priority:-1 extents:1 across:522072k
[ 9.692860] Adding 506008k swap on /dev/hda9. Priority:-2 extents:1 across:506008k
[ 9.905591] EXT4 FS on hda4, internal journal on hda4:8
[ 10.050117] loop: module loaded
[ 10.425261] EXT4-fs: barriers enabled
[ 10.425451] kjournald2 starting: pid 1156, dev hda8:8, commit interval 5 seconds
[ 10.425729] EXT4 FS on hda8, internal journal on hda8:8
[ 10.425731] EXT4-fs: delayed allocation enabled
[ 10.425733] EXT4-fs: file extents enabled
[ 10.426080] EXT4-fs: mballoc enabled
[ 10.426095] EXT4-fs: mounted filesystem hda8 with ordered data mode
[ 11.235188] PPP generic driver version 2.4.2
[ 11.574548] NET: Registered protocol family 24
[ 12.004934] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 17.170044] lp0: using parport0 (interrupt-driven).
[ 17.187152] ppdev: user-space parallel port driver
[ 21.292021] eth1: no IPv6 routers present
[ 23.346306] skge eth0: enabling interface
[ 23.349794] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3475.220426] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3475.220442] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3475.220451] hdb: possibly failed opcode: 0xa0
[ 3475.240418] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3475.240434] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3475.240443] hdb: possibly failed opcode: 0xa0
[ 3475.260410] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3475.260425] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3475.260435] hdb: possibly failed opcode: 0xa0
[ 3475.284414] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3475.284430] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3475.284439] hdb: possibly failed opcode: 0xa0
[ 3475.284446] hdb: DMA disabled
[ 3475.332035] hdb: ATAPI reset complete
[ 3475.352376] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3475.352390] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3475.352400] hdb: possibly failed opcode: 0xa0
[ 3475.356376] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3475.356390] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3475.356399] hdb: possibly failed opcode: 0xa0
[ 3475.360403] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3475.360416] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3475.360425] hdb: possibly failed opcode: 0xa0
[ 3475.408037] hdb: ATAPI reset complete
[ 3475.416621] end_request: I/O error, dev hdb, sector 0
[ 3475.416631] Buffer I/O error on device hdb, logical block 0
[ 3475.416640] Buffer I/O error on device hdb, logical block 1
[ 3475.416650] Buffer I/O error on device hdb, logical block 2
[ 3475.416656] Buffer I/O error on device hdb, logical block 3
[ 3475.416662] Buffer I/O error on device hdb, logical block 4
[ 3475.416668] Buffer I/O error on device hdb, logical block 5
[ 3475.416674] Buffer I/O error on device hdb, logical block 6
[ 3475.416680] Buffer I/O error on device hdb, logical block 7
[ 3475.416686] Buffer I/O error on device hdb, logical block 8
[ 3475.416693] Buffer I/O error on device hdb, logical block 9
[ 3475.421099] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3475.421113] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3475.421122] hdb: possibly failed opcode: 0xa0
[ 3475.424386] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3475.424399] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3475.424408] hdb: possibly failed opcode: 0xa0
[ 3475.428389] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3475.428402] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3475.428411] hdb: possibly failed opcode: 0xa0
[ 3475.436392] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3475.436405] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3475.436414] hdb: possibly failed opcode: 0xa0
[ 3475.484042] hdb: ATAPI reset complete
[ 3475.496429] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3475.496444] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3475.496454] hdb: possibly failed opcode: 0xa0
[ 3475.500437] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3475.500451] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3475.500459] hdb: possibly failed opcode: 0xa0
[ 3475.504389] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3475.504403] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3475.504412] hdb: possibly failed opcode: 0xa0
[ 3475.552040] hdb: ATAPI reset complete
[ 3475.560668] end_request: I/O error, dev hdb, sector 0
[ 3475.702205] cdrom: This disc doesn't have any tracks I recognize!
[ 3475.741035] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3475.741050] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3475.741060] hdb: possibly failed opcode: 0xa0
[ 3475.744388] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3475.744402] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3475.744411] hdb: possibly failed opcode: 0xa0
[ 3475.748393] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3475.748406] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3475.748415] hdb: possibly failed opcode: 0xa0
[ 3475.752370] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3475.752383] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3475.752392] hdb: possibly failed opcode: 0xa0
[ 3475.800039] hdb: ATAPI reset complete
[ 3475.812391] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3475.812407] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3475.812416] hdb: possibly failed opcode: 0xa0
[ 3475.816424] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3475.816439] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3475.816448] hdb: possibly failed opcode: 0xa0
[ 3475.820386] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3475.820399] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3475.820408] hdb: possibly failed opcode: 0xa0
[ 3475.868043] hdb: ATAPI reset complete
[ 3475.876625] end_request: I/O error, dev hdb, sector 0
[ 3475.881038] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3475.881051] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3475.881061] hdb: possibly failed opcode: 0xa0
[ 3475.884385] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3475.884398] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3475.884407] hdb: possibly failed opcode: 0xa0
[ 3475.888429] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3475.888442] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3475.888451] hdb: possibly failed opcode: 0xa0
[ 3475.892396] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3475.892409] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3475.892417] hdb: possibly failed opcode: 0xa0
[ 3475.940038] hdb: ATAPI reset complete
[ 3475.952371] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3475.952385] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3475.952394] hdb: possibly failed opcode: 0xa0
[ 3475.956384] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3475.956397] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3475.956406] hdb: possibly failed opcode: 0xa0
[ 3475.960394] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3475.960407] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3475.960416] hdb: possibly failed opcode: 0xa0
[ 3476.008038] hdb: ATAPI reset complete
[ 3476.016626] end_request: I/O error, dev hdb, sector 0
[ 3476.021045] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3476.021058] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3476.021067] hdb: possibly failed opcode: 0xa0
[ 3476.024394] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3476.024406] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3476.024415] hdb: possibly failed opcode: 0xa0
[ 3476.028379] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3476.028392] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3476.028400] hdb: possibly failed opcode: 0xa0
[ 3476.032378] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3476.032390] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3476.032399] hdb: possibly failed opcode: 0xa0
[ 3476.080039] hdb: ATAPI reset complete
[ 3476.092389] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3476.092402] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3476.092411] hdb: possibly failed opcode: 0xa0
[ 3476.096377] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3476.096389] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3476.096398] hdb: possibly failed opcode: 0xa0
[ 3476.100396] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3476.100408] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3476.100417] hdb: possibly failed opcode: 0xa0
[ 3476.148037] hdb: ATAPI reset complete
[ 3476.156611] end_request: I/O error, dev hdb, sector 0
[ 3476.168110] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3476.168125] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3476.168135] hdb: possibly failed opcode: 0xa0
[ 3476.184389] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3476.184403] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3476.184413] hdb: possibly failed opcode: 0xa0
[ 3476.188370] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3476.188384] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3476.188393] hdb: possibly failed opcode: 0xa0
[ 3476.192396] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3476.192409] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3476.192417] hdb: possibly failed opcode: 0xa0
[ 3476.240040] hdb: ATAPI reset complete
[ 3476.252387] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3476.252401] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3476.252410] hdb: possibly failed opcode: 0xa0
[ 3476.256369] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3476.256382] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3476.256391] hdb: possibly failed opcode: 0xa0
[ 3476.260393] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3476.260407] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3476.260416] hdb: possibly failed opcode: 0xa0
[ 3476.308035] hdb: ATAPI reset complete
[ 3476.316625] end_request: I/O error, dev hdb, sector 0
[ 3476.365028] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3476.365045] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3476.365055] hdb: possibly failed opcode: 0xa0
[ 3476.368473] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3476.368488] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3476.368497] hdb: possibly failed opcode: 0xa0
[ 3476.372480] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3476.372496] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3476.372505] hdb: possibly failed opcode: 0xa0
[ 3476.376417] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3476.376434] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3476.376443] hdb: possibly failed opcode: 0xa0
[ 3476.424058] hdb: ATAPI reset complete
[ 3476.436393] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3476.436410] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3476.436419] hdb: possibly failed opcode: 0xa0
[ 3476.440444] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3476.440459] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3476.440468] hdb: possibly failed opcode: 0xa0
[ 3476.444395] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3476.444410] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3476.444419] hdb: possibly failed opcode: 0xa0
[ 3476.492037] hdb: ATAPI reset complete
[ 3476.500600] end_request: I/O error, dev hdb, sector 0
[ 3476.501043] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3476.501050] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3476.501055] hdb: possibly failed opcode: 0xa0
[ 3476.504367] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3476.504375] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3476.504379] hdb: possibly failed opcode: 0xa0
[ 3476.508418] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3476.508425] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3476.508429] hdb: possibly failed opcode: 0xa0
[ 3476.512373] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3476.512381] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3476.512386] hdb: possibly failed opcode: 0xa0
[ 3476.560031] hdb: ATAPI reset complete
[ 3476.572363] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3476.572372] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3476.572377] hdb: possibly failed opcode: 0xa0
[ 3476.576496] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3476.576503] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3476.576507] hdb: possibly failed opcode: 0xa0
[ 3476.580397] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3476.580404] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3476.580408] hdb: possibly failed opcode: 0xa0
[ 3476.628037] hdb: ATAPI reset complete
[ 3476.636611] end_request: I/O error, dev hdb, sector 0
[ 3476.637050] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3476.637057] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3476.637061] hdb: possibly failed opcode: 0xa0
[ 3476.640444] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3476.640457] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3476.640466] hdb: possibly failed opcode: 0xa0
[ 3476.644437] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3476.644451] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3476.644460] hdb: possibly failed opcode: 0xa0
[ 3476.648387] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3476.648400] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3476.648409] hdb: possibly failed opcode: 0xa0
[ 3476.696036] hdb: ATAPI reset complete
[ 3476.708374] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3476.708390] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3476.708399] hdb: possibly failed opcode: 0xa0
[ 3476.712376] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3476.712389] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3476.712398] hdb: possibly failed opcode: 0xa0
[ 3476.716453] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3476.716467] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3476.716476] hdb: possibly failed opcode: 0xa0
[ 3476.764037] hdb: ATAPI reset complete
[ 3476.772621] end_request: I/O error, dev hdb, sector 0
[ 3533.659370] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3533.659385] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3533.659395] hdb: possibly failed opcode: 0xa0
[ 3533.662346] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3533.662359] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3533.662368] hdb: possibly failed opcode: 0xa0
[ 3533.665385] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3533.665398] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3533.665407] hdb: possibly failed opcode: 0xa0
[ 3533.668362] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3533.668375] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3533.668384] hdb: possibly failed opcode: 0xa0
[ 3533.716037] hdb: ATAPI reset complete
[ 3533.724386] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3533.724399] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3533.724408] hdb: possibly failed opcode: 0xa0
[ 3533.728379] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3533.728392] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3533.728401] hdb: possibly failed opcode: 0xa0
[ 3533.732398] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3533.732411] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3533.732419] hdb: possibly failed opcode: 0xa0
[ 3533.780039] hdb: ATAPI reset complete
[ 3533.788616] end_request: I/O error, dev hdb, sector 0
[ 3533.788625] __ratelimit: 82 callbacks suppressed
[ 3533.788631] Buffer I/O error on device hdb, logical block 0
[ 3533.788640] Buffer I/O error on device hdb, logical block 1
[ 3533.788648] Buffer I/O error on device hdb, logical block 2
[ 3533.788655] Buffer I/O error on device hdb, logical block 3
[ 3533.788661] Buffer I/O error on device hdb, logical block 4
[ 3533.788667] Buffer I/O error on device hdb, logical block 5
[ 3533.788674] Buffer I/O error on device hdb, logical block 6
[ 3533.788680] Buffer I/O error on device hdb, logical block 7
[ 3533.788687] Buffer I/O error on device hdb, logical block 8
[ 3533.788693] Buffer I/O error on device hdb, logical block 9
[ 3533.793083] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3533.793096] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3533.793105] hdb: possibly failed opcode: 0xa0
[ 3533.796375] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3533.796388] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3533.796397] hdb: possibly failed opcode: 0xa0
[ 3533.800421] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3533.800434] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3533.800443] hdb: possibly failed opcode: 0xa0
[ 3533.804449] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3533.804462] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3533.804471] hdb: possibly failed opcode: 0xa0
[ 3533.852033] hdb: ATAPI reset complete
[ 3533.864449] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3533.864463] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3533.864473] hdb: possibly failed opcode: 0xa0
[ 3533.868393] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3533.868406] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3533.868415] hdb: possibly failed opcode: 0xa0
[ 3533.872378] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3533.872391] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3533.872400] hdb: possibly failed opcode: 0xa0
[ 3533.920044] hdb: ATAPI reset complete
[ 3533.928623] end_request: I/O error, dev hdb, sector 0
[ 3534.007557] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3534.007572] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3534.007582] hdb: possibly failed opcode: 0xa0
[ 3534.010518] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3534.010531] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3534.010540] hdb: possibly failed opcode: 0xa0
[ 3534.013495] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3534.013507] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3534.013516] hdb: possibly failed opcode: 0xa0
[ 3534.016536] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3534.016548] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3534.016557] hdb: possibly failed opcode: 0xa0
[ 3534.064035] hdb: ATAPI reset complete
[ 3534.076387] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3534.076400] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3534.076409] hdb: possibly failed opcode: 0xa0
[ 3534.080402] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3534.080415] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3534.080424] hdb: possibly failed opcode: 0xa0
[ 3534.084379] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3534.084392] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3534.084400] hdb: possibly failed opcode: 0xa0
[ 3534.132038] hdb: ATAPI reset complete
[ 3534.140623] end_request: I/O error, dev hdb, sector 0
[ 3534.141744] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3534.141758] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3534.141767] hdb: possibly failed opcode: 0xa0
[ 3534.144779] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3534.144792] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3534.144801] hdb: possibly failed opcode: 0xa0
[ 3534.148394] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3534.148406] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3534.148415] hdb: possibly failed opcode: 0xa0
[ 3534.152379] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3534.152391] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3534.152400] hdb: possibly failed opcode: 0xa0
[ 3534.200032] hdb: ATAPI reset complete
[ 3534.212387] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3534.212400] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3534.212408] hdb: possibly failed opcode: 0xa0
[ 3534.216368] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3534.216381] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3534.216390] hdb: possibly failed opcode: 0xa0
[ 3534.220376] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3534.220389] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3534.220398] hdb: possibly failed opcode: 0xa0
[ 3534.268032] hdb: ATAPI reset complete
[ 3534.276624] end_request: I/O error, dev hdb, sector 0
[ 3534.281038] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3534.281051] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3534.281060] hdb: possibly failed opcode: 0xa0
[ 3534.284378] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3534.284390] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3534.284399] hdb: possibly failed opcode: 0xa0
[ 3534.288393] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3534.288406] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3534.288414] hdb: possibly failed opcode: 0xa0
[ 3534.292394] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3534.292406] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3534.292415] hdb: possibly failed opcode: 0xa0
[ 3534.340036] hdb: ATAPI reset complete
[ 3534.424392] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3534.424407] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3534.424416] hdb: possibly failed opcode: 0xa0
[ 3534.428372] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3534.428385] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3534.428394] hdb: possibly failed opcode: 0xa0
[ 3534.432379] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3534.432391] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3534.432400] hdb: possibly failed opcode: 0xa0
[ 3534.480037] hdb: ATAPI reset complete
[ 3534.488624] end_request: I/O error, dev hdb, sector 0
[ 3534.544611] cdrom: This disc doesn't have any tracks I recognize!
[ 3534.577934] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3534.577949] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3534.577959] hdb: possibly failed opcode: 0xa0
[ 3534.580909] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3534.580922] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3534.580931] hdb: possibly failed opcode: 0xa0
[ 3534.584399] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3534.584411] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3534.584420] hdb: possibly failed opcode: 0xa0
[ 3534.588381] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3534.588393] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3534.588402] hdb: possibly failed opcode: 0xa0
[ 3534.636037] hdb: ATAPI reset complete
[ 3534.648392] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3534.648405] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3534.648414] hdb: possibly failed opcode: 0xa0
[ 3534.652395] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3534.652408] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3534.652417] hdb: possibly failed opcode: 0xa0
[ 3534.656383] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3534.656395] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3534.656404] hdb: possibly failed opcode: 0xa0
[ 3534.704035] hdb: ATAPI reset complete
[ 3534.712695] end_request: I/O error, dev hdb, sector 0
[ 3534.713140] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3534.713153] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3534.713162] hdb: possibly failed opcode: 0xa0
[ 3534.716386] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3534.716399] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3534.716408] hdb: possibly failed opcode: 0xa0
[ 3534.720383] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3534.720396] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3534.720405] hdb: possibly failed opcode: 0xa0
[ 3534.724376] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3534.724388] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3534.724397] hdb: possibly failed opcode: 0xa0
[ 3534.772035] hdb: ATAPI reset complete
[ 3534.784387] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3534.784400] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3534.784409] hdb: possibly failed opcode: 0xa0
[ 3534.788377] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3534.788390] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3534.788399] hdb: possibly failed opcode: 0xa0
[ 3534.792447] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3534.792460] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3534.792469] hdb: possibly failed opcode: 0xa0
[ 3534.840033] hdb: ATAPI reset complete
[ 3534.848622] end_request: I/O error, dev hdb, sector 0
[ 3534.890031] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3534.890046] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3534.890055] hdb: possibly failed opcode: 0xa0
[ 3534.893064] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3534.893077] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3534.893086] hdb: possibly failed opcode: 0xa0
[ 3534.896378] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3534.896391] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3534.896400] hdb: possibly failed opcode: 0xa0
[ 3534.900394] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3534.900407] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3534.900415] hdb: possibly failed opcode: 0xa0
[ 3534.948034] hdb: ATAPI reset complete
[ 3534.960380] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3534.960393] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3534.960402] hdb: possibly failed opcode: 0xa0
[ 3534.964383] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3534.964395] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3534.964404] hdb: possibly failed opcode: 0xa0
[ 3534.968386] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3534.968399] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3534.968408] hdb: possibly failed opcode: 0xa0
[ 3535.016035] hdb: ATAPI reset complete
[ 3535.024623] end_request: I/O error, dev hdb, sector 0
[ 3535.025074] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3535.025087] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3535.025096] hdb: possibly failed opcode: 0xa0
[ 3535.028369] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3535.028382] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3535.028391] hdb: possibly failed opcode: 0xa0
[ 3535.032392] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3535.032405] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3535.032414] hdb: possibly failed opcode: 0xa0
[ 3535.036395] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3535.036407] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3535.036416] hdb: possibly failed opcode: 0xa0
[ 3535.084038] hdb: ATAPI reset complete
[ 3535.096370] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3535.096384] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3535.096393] hdb: possibly failed opcode: 0xa0
[ 3535.100383] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3535.100396] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3535.100405] hdb: possibly failed opcode: 0xa0
[ 3535.104395] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3535.104408] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3535.104417] hdb: possibly failed opcode: 0xa0
[ 3535.152038] hdb: ATAPI reset complete
[ 3535.160629] end_request: I/O error, dev hdb, sector 0
[ 3535.161089] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3535.161102] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3535.161111] hdb: possibly failed opcode: 0xa0
[ 3535.164390] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3535.164402] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3535.164411] hdb: possibly failed opcode: 0xa0
[ 3535.168395] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3535.168407] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3535.168416] hdb: possibly failed opcode: 0xa0
[ 3535.172378] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3535.172391] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3535.172399] hdb: possibly failed opcode: 0xa0
[ 3535.220037] hdb: ATAPI reset complete
[ 3535.232388] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3535.232401] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3535.232410] hdb: possibly failed opcode: 0xa0
[ 3535.236391] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3535.236403] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3535.236412] hdb: possibly failed opcode: 0xa0
[ 3535.240379] hdb: cdrom_decode_status: status=0x51 { DriveReady SeekComplete Error }
[ 3535.240392] hdb: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[ 3535.240400] hdb: possibly failed opcode: 0xa0
[ 3535.288036] hdb: ATAPI reset complete
[ 3535.296639] end_request: I/O error, dev hdb, sector 0
[ 3800.204040] usb 1-1: new high speed USB device using ehci_hcd and address 5
[ 3800.338713] usb 1-1: New USB device found, idVendor=0402, idProduct=0611
[ 3800.338722] usb 1-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 3800.338729] usb 1-1: Product: Audio Player
[ 3800.338734] usb 1-1: Manufacturer: .
[ 3800.338739] usb 1-1: SerialNumber: 00367070801509000344
[ 3800.338910] usb 1-1: configuration #1 chosen from 1 choice
[ 3801.204814] Initializing USB Mass Storage driver...
[ 3801.233285] scsi0 : SCSI emulation for USB Mass Storage devices
[ 3801.233505] usbcore: registered new interface driver usb-storage
[ 3801.233509] USB Mass Storage support registered.
[ 3801.236841] usb-storage: device found at 5
[ 3801.236844] usb-storage: waiting for device to settle before scanning
[ 3806.236265] usb-storage: device scan complete
[ 3806.653907] scsi 0:0:0:0: Direct-Access Audio Player PQ: 0 ANSI: 0 CCS
[ 3806.654748] scsi 0:0:0:1: Direct-Access Micro SD/T-Flash PQ: 0 ANSI: 0 CCS
[ 3806.762735] Driver 'sd' needs updating - please use bus_type methods
[ 3806.790981] sd 0:0:0:0: [sda] 4022784 512-byte hardware sectors: (2.05 GB/1.91 GiB)
[ 3806.791601] sd 0:0:0:0: [sda] Write Protect is off
[ 3806.791609] sd 0:0:0:0: [sda] Mode Sense: 3b 00 00 00
[ 3806.791615] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 3806.794097] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 3806.794106] sda: sda1
[ 3806.795305] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 3806.819507] sd 0:0:0:1: [sdb] Attached SCSI removable disk
[ 3807.575835] __ratelimit: 146 callbacks suppressed
[ 3807.575845] devkit-disks-da[4902]: segfault at c ip 080660da sp bfc1c030 error 4 in devkit-disks-daemon[8048000+28000]
[ 3808.064243] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-trunk-686 (Debian 2.6.32-5) (ben@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sun Jan 10 06:32:16 UTC 2010 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001ffc0000 (usable) [ 0.000000] BIOS-e820: 000000001ffc0000 - 000000001ffcf000 (ACPI data) [ 0.000000] BIOS-e820: 000000001ffcf000 - 0000000020000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x1ffc0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FE0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] initial memory mapped : 0 - 01800000 [ 0.000000] init_memory_mapping: 0000000000000000-000000001ffc0000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 001fc00000 page 2M [ 0.000000] 001fc00000 - 001ffc0000 page 4k [ 0.000000] kernel direct mapping tables up to 1ffc0000 @ 10000-16000 [ 0.000000] RAMDISK: 178a2000 - 1800f8eb [ 0.000000] ACPI: RSDP 000f6990 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 1ffc0000 00038 (v01 A M I OEMRSDT 11000507 MSFT 00000097) [ 0.000000] ACPI: FACP 1ffc0200 00084 (v02 A M I OEMFACP 11000507 MSFT 00000097) [ 0.000000] ACPI: DSDT 1ffc0430 089E6 (v01 0AAAA 0AAAA000 00000000 INTL 02002026) [ 0.000000] ACPI: FACS 1ffcf000 00040 [ 0.000000] ACPI: APIC 1ffc0390 00054 (v01 A M I OEMAPIC 11000507 MSFT 00000097) [ 0.000000] ACPI: MCFG 1ffc03f0 0003C (v01 A M I OEMMCFG 11000507 MSFT 00000097) [ 0.000000] ACPI: OEMB 1ffcf040 00040 (v01 A M I AMI_OEM 11000507 MSFT 00000097) [ 0.000000] ACPI: SSDT 1ffc8e20 002D2 (v01 AMI CPU1PM 00000001 INTL 02002026) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 511MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 1ffc0000 [ 0.000000] low ram: 0 - 1ffc0000 [ 0.000000] node 0 low ram: 00000000 - 1ffc0000 [ 0.000000] node 0 bootmap 00012000 - 00015ff8 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001ffc0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0001000000 - 00014a1334] TEXT DATA BSS ==> [0001000000 - 00014a1334] [ 0.000000] #4 [00178a2000 - 001800f8eb] RAMDISK ==> [00178a2000 - 001800f8eb] [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #6 [00014a2000 - 00014a8215] BRK ==> [00014a2000 - 00014a8215] [ 0.000000] #7 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #8 [0000012000 - 0000016000] BOOTMAP ==> [0000012000 - 0000016000] [ 0.000000] found SMP MP-table at [c00ff780] ff780 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0001ffc0 [ 0.000000] HighMem 0x0001ffc0 -> 0x0001ffc0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0001ffc0 [ 0.000000] On node 0 totalpages: 130895 [ 0.000000] free_area_init_node: node 0, pgdat c138edc0, node_mem_map c14aa200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 992 pages used for memmap [ 0.000000] Normal zone: 125920 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:ded14000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1c00000 s34072 r0 d23272 u4194304 [ 0.000000] pcpu-alloc: s34072 r0 d23272 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129871 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-trunk-686 root=UUID=3aeef3e1-dad7-402a-b446-9a57c81c8407 ro quiet [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 506276k/524032k available (2414k kernel code, 16972k reserved, 1266k data, 368k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB) [ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.000000] vmalloc : 0xe07c0000 - 0xff3fe000 ( 492 MB) [ 0.000000] lowmem : 0xc0000000 - 0xdffc0000 ( 511 MB) [ 0.000000] .init : 0xc1399000 - 0xc13f5000 ( 368 kB) [ 0.000000] .data : 0xc125bb11 - 0xc1398560 (1266 kB) [ 0.000000] .text : 0xc1000000 - 0xc125bb11 (2414 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:1280 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1729.031 MHz processor. [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3458.06 BogoMIPS (lpj=6916124) [ 0.004021] Security Framework initialized [ 0.004028] SELinux: Disabled at boot. [ 0.004035] Mount-cache hash table entries: 512 [ 0.004157] Initializing cgroup subsys ns [ 0.004162] Initializing cgroup subsys cpuacct [ 0.004166] Initializing cgroup subsys devices [ 0.004169] Initializing cgroup subsys freezer [ 0.004171] Initializing cgroup subsys net_cls [ 0.004194] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004197] CPU: L2 cache: 2048K [ 0.004202] mce: CPU supports 5 MCE banks [ 0.004211] CPU0: Thermal monitoring enabled (TM2) [ 0.004220] Performance Events: p6 PMU driver. [ 0.004231] ... version: 0 [ 0.004233] ... bit width: 32 [ 0.004235] ... generic registers: 2 [ 0.004237] ... value mask: 00000000ffffffff [ 0.004240] ... max period: 000000007fffffff [ 0.004242] ... fixed-purpose events: 0 [ 0.004244] ... event mask: 0000000000000003 [ 0.004248] Checking 'hlt' instruction... OK. [ 0.020365] SMP alternatives: switching to UP code [ 0.024102] Freeing SMP alternatives: 13k freed [ 0.024108] ACPI: Core revision 20090903 [ 0.040391] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.081683] CPU0: Intel(R) Pentium(R) M processor 1.73GHz stepping 08 [ 0.084001] Brought up 1 CPUs [ 0.084001] Total of 1 processors activated (3458.06 BogoMIPS). [ 0.084001] CPU0 attaching NULL sched-domain. [ 0.084001] devtmpfs: initialized [ 0.084001] regulator: core version 0.5 [ 0.084001] NET: Registered protocol family 16 [ 0.084001] ACPI: bus type pci registered [ 0.084001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.084001] PCI: Not using MMCONFIG. [ 0.084001] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3 [ 0.084001] PCI: Using configuration type 1 for base access [ 0.084001] bio: create slab <bio-0> at 0 [ 0.084001] ACPI: EC: Look up EC in DSDT [ 0.110034] ACPI: Interpreter enabled [ 0.110051] ACPI: (supports S0 S3 S4 S5) [ 0.110077] ACPI: Using IOAPIC for interrupt routing [ 0.110152] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.113857] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.113859] PCI: Using MMCONFIG for extended config space [ 0.122455] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 0.122526] ACPI: Power Resource [GFAN] (off) [ 0.122723] ACPI: No dock devices found. [ 0.122870] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.122975] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.122979] pci 0000:00:01.0: PME# disabled [ 0.123050] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfebf8000-0xfebfbfff] [ 0.123100] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.123105] pci 0000:00:1b.0: PME# disabled [ 0.123155] pci 0000:00:1d.0: reg 20 io port: [0xe480-0xe49f] [ 0.123212] pci 0000:00:1d.1: reg 20 io port: [0xe800-0xe81f] [ 0.123269] pci 0000:00:1d.2: reg 20 io port: [0xe880-0xe89f] [ 0.123327] pci 0000:00:1d.3: reg 20 io port: [0xec00-0xec1f] [ 0.123388] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfebffc00-0xfebfffff] [ 0.123446] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.123452] pci 0000:00:1d.7: PME# disabled [ 0.123582] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 0.123589] pci 0000:00:1f.0: Enabled ICH6/i801 SMBus device [ 0.123595] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 0.123600] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO [ 0.123604] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0280-02ff [ 0.123609] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 0a00-0a0f [ 0.123636] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.123644] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.123652] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.123659] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.123667] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf] [ 0.123735] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] [ 0.123791] pci 0000:03:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff] [ 0.123800] pci 0000:03:00.0: reg 14 64bit mmio pref: [0xc0000000-0xcfffffff] [ 0.123809] pci 0000:03:00.0: reg 1c 64bit mmio: [0xfc000000-0xfcffffff] [ 0.123818] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfeae0000-0xfeafffff] [ 0.123879] pci 0000:00:01.0: bridge 32bit mmio: [0xfaa00000-0xfeafffff] [ 0.123884] pci 0000:00:01.0: bridge 32bit mmio pref: [0xbfe00000-0xdfefffff] [ 0.123933] pci 0000:01:00.0: reg 10 32bit mmio: [0xfa9f8000-0xfa9fbfff] [ 0.123942] pci 0000:01:00.0: reg 14 io port: [0xd800-0xd8ff] [ 0.123972] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfa9c0000-0xfa9dffff] [ 0.124005] pci 0000:01:00.0: supports D1 D2 [ 0.124007] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.124013] pci 0000:01:00.0: PME# disabled [ 0.124054] pci 0000:01:01.0: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.124077] pci 0000:01:01.0: supports D1 D2 [ 0.124079] pci 0000:01:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.124084] pci 0000:01:01.0: PME# disabled [ 0.124123] pci 0000:01:01.1: reg 10 32bit mmio: [0xfa9fe000-0xfa9fe7ff] [ 0.124178] pci 0000:01:01.1: PME# supported from D0 D3hot D3cold [ 0.124183] pci 0000:01:01.1: PME# disabled [ 0.124222] pci 0000:01:01.2: reg 10 32bit mmio: [0xfa9fe800-0xfa9fe8ff] [ 0.124275] pci 0000:01:01.2: supports D1 D2 [ 0.124278] pci 0000:01:01.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.124283] pci 0000:01:01.2: PME# disabled [ 0.124322] pci 0000:01:01.3: reg 10 32bit mmio: [0xfa9fec00-0xfa9fecff] [ 0.124376] pci 0000:01:01.3: supports D1 D2 [ 0.124379] pci 0000:01:01.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.124384] pci 0000:01:01.3: PME# disabled [ 0.124431] pci 0000:01:03.0: reg 10 32bit mmio: [0xfa9ff000-0xfa9fffff] [ 0.124488] pci 0000:01:03.0: PME# supported from D0 D3hot D3cold [ 0.124494] pci 0000:01:03.0: PME# disabled [ 0.124541] pci 0000:00:1e.0: transparent bridge [ 0.124546] pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff] [ 0.124551] pci 0000:00:1e.0: bridge 32bit mmio: [0xfa900000-0xfa9fffff] [ 0.124583] pci_bus 0000:00: on NUMA node 0 [ 0.124589] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.124796] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.125012] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] [ 0.129920] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12) [ 0.130076] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 12) *11 [ 0.130231] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 12) [ 0.130385] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 12) [ 0.130539] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 12) [ 0.130693] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 12) *0, disabled. [ 0.130848] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 12) [ 0.131001] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 12) [ 0.131121] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.131126] vgaarb: loaded [ 0.131185] PCI: Using ACPI for IRQ routing [ 0.131468] hpet clockevent registered [ 0.131472] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.131479] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.131484] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.136008] Switching to clocksource tsc [ 0.137440] pnp: PnP ACPI init [ 0.137451] ACPI: bus type pnp registered [ 0.140854] pnp: PnP ACPI: found 14 devices [ 0.140857] ACPI: ACPI bus type pnp unregistered [ 0.140861] PnPBIOS: Disabled by ACPI PNP [ 0.140874] system 00:09: ioport range 0x4d0-0x4d1 has been reserved [ 0.140878] system 00:09: ioport range 0x800-0x87f has been reserved [ 0.140882] system 00:09: ioport range 0x400-0x41f has been reserved [ 0.140886] system 00:09: ioport range 0x480-0x4bf has been reserved [ 0.140890] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.140894] system 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.140898] system 00:09: iomem range 0xffb00000-0xffbfffff could not be reserved [ 0.140904] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.140908] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.140914] system 00:0b: ioport range 0xa00-0xa0f has been reserved [ 0.140920] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved [ 0.140927] system 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 0.140931] system 00:0d: iomem range 0xc0000-0xcffff could not be reserved [ 0.140934] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved [ 0.140938] system 00:0d: iomem range 0x100000-0x1fffffff could not be reserved [ 0.140942] system 00:0d: iomem range 0xfec00001-0xffffffff could not be reserved [ 0.175629] pci 0000:01:00.0: BAR 6: address space collision on of device [0xfa9c0000-0xfa9dffff] [ 0.175714] pci 0000:00:01.0: PCI bridge, secondary bus 0000:03 [ 0.175716] pci 0000:00:01.0: IO window: disabled [ 0.175721] pci 0000:00:01.0: MEM window: 0xfaa00000-0xfeafffff [ 0.175725] pci 0000:00:01.0: PREFETCH window: 0xbfe00000-0xdfefffff [ 0.175735] pci 0000:01:01.0: CardBus bridge, secondary bus 0000:02 [ 0.175738] pci 0000:01:01.0: IO window: 0x00d000-0x00d0ff [ 0.175744] pci 0000:01:01.0: IO window: 0x00d400-0x00d4ff [ 0.175749] pci 0000:01:01.0: PREFETCH window: 0x20000000-0x23ffffff [ 0.175755] pci 0000:01:01.0: MEM window: 0x28000000-0x2bffffff [ 0.175760] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01 [ 0.175764] pci 0000:00:1e.0: IO window: 0xd000-0xdfff [ 0.175770] pci 0000:00:1e.0: MEM window: 0xfa900000-0xfa9fffff [ 0.175776] pci 0000:00:1e.0: PREFETCH window: 0x20000000-0x25ffffff [ 0.175789] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.175793] pci 0000:00:01.0: setting latency timer to 64 [ 0.175800] pci 0000:00:1e.0: setting latency timer to 64 [ 0.175811] pci 0000:01:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.175818] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.175821] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.175825] pci_bus 0000:03: resource 1 mem: [0xfaa00000-0xfeafffff] [ 0.175828] pci_bus 0000:03: resource 2 pref mem [0xbfe00000-0xdfefffff] [ 0.175832] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] [ 0.175835] pci_bus 0000:01: resource 1 mem: [0xfa900000-0xfa9fffff] [ 0.175838] pci_bus 0000:01: resource 2 pref mem [0x20000000-0x25ffffff] [ 0.175841] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.175844] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff] [ 0.175848] pci_bus 0000:02: resource 0 io: [0xd000-0xd0ff] [ 0.175851] pci_bus 0000:02: resource 1 io: [0xd400-0xd4ff] [ 0.175854] pci_bus 0000:02: resource 2 pref mem [0x20000000-0x23ffffff] [ 0.175857] pci_bus 0000:02: resource 3 mem: [0x28000000-0x2bffffff] [ 0.175887] NET: Registered protocol family 2 [ 0.175974] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.176243] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.176347] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 0.176446] TCP: Hash tables configured (established 16384 bind 16384) [ 0.176448] TCP reno registered [ 0.176511] NET: Registered protocol family 1 [ 0.176610] pci 0000:03:00.0: Boot video device [ 0.176658] Unpacking initramfs... [ 0.438860] Freeing initrd memory: 7606k freed [ 0.445261] audit: initializing netlink socket (disabled) [ 0.445280] type=2000 audit(1264760630.443:1): initialized [ 0.445481] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.447104] VFS: Disk quotas dquot_6.5.2 [ 0.447176] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.447265] msgmni has been set to 1004 [ 0.447473] alg: No test for stdrng (krng) [ 0.447538] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.447542] io scheduler noop registered [ 0.447544] io scheduler anticipatory registered [ 0.447546] io scheduler deadline registered [ 0.447586] io scheduler cfq registered (default) [ 0.447710] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X [ 0.447718] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.447878] isapnp: Scanning for PnP cards... [ 0.801830] isapnp: No Plug & Play device found [ 0.803277] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.803420] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.803815] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 0.806194] i8042.c: Detected active multiplexing controller, rev 1.1. [ 0.807391] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.807399] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.807428] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.807455] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.807477] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.807571] mice: PS/2 mouse device common for all mice [ 0.807603] Driver 'rtc_cmos' needs updating - please use bus_type methods [ 0.807641] rtc_cmos 00:02: RTC can wake from S4 [ 0.807679] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.807706] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs [ 0.807721] cpuidle: using governor ladder [ 0.807723] cpuidle: using governor menu [ 0.807728] No iBFT detected. [ 0.808099] TCP cubic registered [ 0.808259] NET: Registered protocol family 10 [ 0.808729] lo: Disabled Privacy Extensions [ 0.809049] Mobile IPv6 [ 0.809052] NET: Registered protocol family 17 [ 0.809073] Using IPI No-Shortcut mode [ 0.809149] registered taskstats version 1 [ 0.809463] rtc_cmos 00:02: setting system clock to 2010-01-29 10:23:51 UTC (1264760631) [ 0.809517] Freeing unused kernel memory: 368k freed [ 0.809761] Write protecting the kernel text: 2416k [ 0.809783] Write protecting the kernel read-only data: 872k [ 0.836289] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.975041] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.975051] ACPI: Thermal Zone [THRM] (66 C) [ 1.164637] Linux agpgart interface v0.103 [ 1.168906] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 1.169022] ACPI: Lid Switch [LID] [ 1.169125] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 1.169136] ACPI: Sleep Button [SLPB] [ 1.169224] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.169228] ACPI: Power Button [PWRF] [ 1.172258] Uniform Multi-Platform E-IDE driver [ 1.183569] skge 0000:01:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.183614] skge 1.13 addr 0xfa9f8000 irq 20 chip Yukon-Lite rev 9 [ 1.184343] skge eth0: addr 00:15:f2:e8:57:f0 [ 1.202531] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:24/LNXVIDEO:01/input/input4 [ 1.202541] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no) [ 1.206597] usbcore: registered new interface driver usbfs [ 1.206707] usbcore: registered new interface driver hub [ 1.209807] usbcore: registered new device driver usb [ 1.217018] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.217064] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.217083] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.217087] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.217112] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.217144] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.221029] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.236741] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebffc00 [ 1.243651] firewire_ohci 0000:01:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 1.250054] sdhci: Secure Digital Host Controller Interface driver [ 1.250057] sdhci: Copyright(c) Pierre Ossman [ 1.260010] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.260057] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.260060] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.260064] usb usb1: Product: EHCI Host Controller [ 1.260066] usb usb1: Manufacturer: Linux 2.6.32-trunk-686 ehci_hcd [ 1.260069] usb usb1: SerialNumber: 0000:00:1d.7 [ 1.260212] usb usb1: configuration #1 chosen from 1 choice [ 1.260280] hub 1-0:1.0: USB hub found [ 1.260290] hub 1-0:1.0: 8 ports detected [ 1.260361] piix 0000:00:1f.1: IDE controller (0x8086:0x266f rev 0x04) [ 1.260373] PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.260396] piix 0000:00:1f.1: not 100% native mode: will probe irqs later [ 1.260403] ide0: BM-DMA at 0xffa0-0xffa7 [ 1.260411] ide1: BM-DMA at 0xffa8-0xffaf [ 1.260417] Probing IDE interface ide0... [ 1.313851] uhci_hcd: USB Universal Host Controller Interface driver [ 1.320009] firewire_ohci: Added fw-ohci device 0000:01:01.1, OHCI version 1.0 [ 1.320123] sdhci-pci 0000:01:01.2: SDHCI controller found [1180:0822] (rev 17) [ 1.320148] sdhci-pci 0000:01:01.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 1.322194] Registered led device: mmc0:: [ 1.323218] mmc0: SDHCI controller on PCI [0000:01:01.2] using PIO [ 1.548231] hda: FUJITSU MHV2060AT PL, ATA DISK drive [ 1.748010] usb 1-5: new high speed USB device using ehci_hcd and address 4 [ 1.820083] firewire_core: created device fw0: GUID 00e01800034fe27f, S400 [ 1.898392] usb 1-5: New USB device found, idVendor=0402, idProduct=5602 [ 1.898396] usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.898399] usb 1-5: Product: USB2.0 Camera [ 1.898659] usb 1-5: configuration #1 chosen from 1 choice [ 2.052007] hdb: MATSHITADVD-RAM UJ-841S, ATAPI CD/DVD-ROM drive [ 2.052059] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 2.056036] hda: UDMA/100 mode selected [ 2.059574] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 2.059889] hdb: UDMA/33 mode selected [ 2.060298] Probing IDE interface ide1... [ 2.628071] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 2.667295] ide1 at 0x170-0x177,0x376 on irq 15 [ 2.667577] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2.667587] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.667592] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.667603] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.667629] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e480 [ 2.667669] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.667672] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.667675] usb usb2: Product: UHCI Host Controller [ 2.667678] usb usb2: Manufacturer: Linux 2.6.32-trunk-686 uhci_hcd [ 2.667681] usb usb2: SerialNumber: 0000:00:1d.0 [ 2.667759] usb usb2: configuration #1 chosen from 1 choice [ 2.667793] hub 2-0:1.0: USB hub found [ 2.667800] hub 2-0:1.0: 2 ports detected [ 2.667848] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.667855] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2.667859] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.667872] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 2.667896] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e800 [ 2.667929] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.667933] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.667936] usb usb3: Product: UHCI Host Controller [ 2.667938] usb usb3: Manufacturer: Linux 2.6.32-trunk-686 uhci_hcd [ 2.667941] usb usb3: SerialNumber: 0000:00:1d.1 [ 2.668013] usb usb3: configuration #1 chosen from 1 choice [ 2.668043] hub 3-0:1.0: USB hub found [ 2.668049] hub 3-0:1.0: 2 ports detected [ 2.668092] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.668098] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2.668102] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.668109] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 2.668133] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e880 [ 2.668167] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.668170] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.668173] usb usb4: Product: UHCI Host Controller [ 2.668175] usb usb4: Manufacturer: Linux 2.6.32-trunk-686 uhci_hcd [ 2.668178] usb usb4: SerialNumber: 0000:00:1d.2 [ 2.668239] usb usb4: configuration #1 chosen from 1 choice [ 2.668268] hub 4-0:1.0: USB hub found [ 2.668275] hub 4-0:1.0: 2 ports detected [ 2.668317] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 2.668324] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 2.668328] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 2.668335] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 2.668367] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ec00 [ 2.668401] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.668404] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.668407] usb usb5: Product: UHCI Host Controller [ 2.668409] usb usb5: Manufacturer: Linux 2.6.32-trunk-686 uhci_hcd [ 2.668412] usb usb5: SerialNumber: 0000:00:1d.3 [ 2.668473] usb usb5: configuration #1 chosen from 1 choice [ 2.668502] hub 5-0:1.0: USB hub found [ 2.668509] hub 5-0:1.0: 2 ports detected [ 2.701662] SCSI subsystem initialized [ 2.727260] libata version 3.00 loaded. [ 2.745061] ide-gd driver 1.18 [ 2.745096] hda: max request size: 128KiB [ 2.745255] hda: 117210240 sectors (60011 MB) w/8192KiB Cache, CHS=65535/16/63 [ 2.745299] ide-cd driver 5.00 [ 2.749924] hda: cache flushes supported [ 2.749970] hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 hda9 > hda4 [ 2.833090] ide-cd: hdb: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache [ 2.833097] Uniform CD-ROM driver Revision: 3.20 [ 2.980050] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 3.157925] usb 3-1: New USB device found, idVendor=0a5c, idProduct=6300 [ 3.157929] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.157932] usb 3-1: Product: USB Network Interface [ 3.157935] usb 3-1: Manufacturer: Broadcom Corporation [ 3.157937] usb 3-1: SerialNumber: 0019c6c4515c [ 3.158046] usb 3-1: configuration #2 chosen from 2 choices [ 3.276012] usb 3-2: new low speed USB device using uhci_hcd and address 3 [ 3.451918] usb 3-2: New USB device found, idVendor=046d, idProduct=c016 [ 3.451922] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.451926] usb 3-2: Product: Optical USB Mouse [ 3.451928] usb 3-2: Manufacturer: Logitech [ 3.452046] usb 3-2: configuration #1 chosen from 1 choice [ 3.468457] usbcore: registered new interface driver hiddev [ 3.481353] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input5 [ 3.481483] generic-usb 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.1-2/input0 [ 3.481504] usbcore: registered new interface driver usbhid [ 3.481586] usbhid: v2.6:USB HID core driver [ 3.832744] PM: Starting manual resume from disk [ 3.921953] EXT4-fs (hda4): mounted filesystem with ordered data mode [ 5.540282] udev: starting version 150 [ 6.060906] Marking TSC unstable due to TSC halts in idle [ 6.061789] processor LNXCPU:00: registered as cooling_device0 [ 6.061994] Switching to clocksource hpet [ 6.078022] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 6.102731] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 6.102737] ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMB0 [0x400-0x40f] [ 6.102821] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.145542] ACPI: Battery Slot [BAT0] (battery present) [ 6.145639] ACPI: AC Adapter [AC0] (on-line) [ 6.190308] asus_laptop: Asus Laptop Support version 0.42 [ 6.194019] asus_laptop: A6VM model detected [ 6.194969] input: Asus Laptop extra buttons as /devices/virtual/input/input7 [ 6.195466] Registered led device: asus::mail [ 6.529134] lib80211: common routines for IEEE802.11 drivers [ 6.529138] lib80211_crypt: registered algorithm 'NULL' [ 6.573465] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 6.573468] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com> [ 6.606174] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq [ 6.606177] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 6.606250] ipw2200 0000:01:03.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 6.606309] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 6.606357] ipw2200 0000:01:03.0: firmware: requesting ipw2200-bss.fw [ 6.651962] parport_pc 00:08: reported by Plug and Play ACPI [ 6.651989] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP] [ 7.016761] intel_rng: FWH not detected [ 7.104960] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008 [ 7.107565] ipw2200: ipw2200-bss.fw request_firmware failed: Reason -2 [ 7.107636] ipw2200: Unable to load firmware: -2 [ 7.107699] ipw2200: failed to register network device [ 7.107968] ipw2200 0000:01:03.0: PCI INT A disabled [ 7.107982] ipw2200: probe of 0000:01:03.0 failed with error -5 [ 7.146655] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8 [ 7.182749] yenta_cardbus 0000:01:01.0: CardBus bridge found [1043:1177] [ 7.308907] yenta_cardbus 0000:01:01.0: ISA IRQ mask 0x0c38, PCI irq 17 [ 7.308912] yenta_cardbus 0000:01:01.0: Socket status: 30000006 [ 7.308922] yenta_cardbus 0000:01:01.0: pcmcia: parent PCI bridge I/O window: 0xd000 - 0xdfff [ 7.308927] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xd000-0xdfff: clean. [ 7.309180] yenta_cardbus 0000:01:01.0: pcmcia: parent PCI bridge Memory window: 0xfa900000 - 0xfa9fffff [ 7.309184] yenta_cardbus 0000:01:01.0: pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x25ffffff [ 7.528432] eth1: register 'cdc_ether' at usb-0000:00:1d.1-1, CDC Ethernet Device, 00:19:c6:c4:51:5c [ 7.528470] usbcore: registered new interface driver cdc_ether [ 7.577174] Linux video capture interface: v2.00 [ 7.609665] gspca: main v2.7.0 registered [ 7.648973] gspca: probing 0402:5602 [ 7.648978] ALi m5602: Probing for a po1030 sensor [ 7.662194] ALi m5602: Probing for a mt9m111 sensor [ 7.677193] ALi m5602: Probing for a s5k4aa sensor [ 7.714194] ALi m5602: Probing for an ov9650 sensor [ 7.731815] ALi m5602: Detected an ov9650 sensor [ 7.817029] gspca: probe ok [ 7.817059] usbcore: registered new interface driver ALi m5602 [ 7.817062] ALi m5602: registered [ 7.923930] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7.923963] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 8.515537] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 8.516975] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean. [ 8.517359] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 8.517650] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 8.518271] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 8.715443] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9 [ 9.316702] Adding 522072k swap on /dev/hda6. Priority:-1 extents:1 across:522072k [ 9.382274] Adding 506008k swap on /dev/hda9. Priority:-2 extents:1 across:506008k [ 9.847118] loop: module loaded [ 10.231603] EXT4-fs (hda8): mounted filesystem with ordered data mode [ 10.878282] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 11.077523] PPP generic driver version 2.4.2 [ 16.551675] lp0: using parport0 (interrupt-driven). [ 16.558230] ppdev: user-space parallel port driver [ 22.329702] skge eth0: enabling interface [ 22.333092] ADDRCONF(NETDEV_UP): eth0: link is not ready
ping www.google.com
ping: unknown host www.google.com
sudo ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:15:f2:e8:57:f0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:20
eth1 Link encap:Ethernet HWaddr 00:19:c6:c4:51:5c
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:3 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:138 (138.0 B) TX bytes:0 (0.0 B)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:32 errors:0 dropped:0 overruns:0 frame:0
TX packets:32 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2136 (2.0 KiB) TX bytes:2136 (2.0 KiB)
sudo ifconfig ppp0
ppp0: error fetching interface information: Device not found
sudo pon dsl-provider
Plugin rp-pppoe.so loaded.
sudo poff
/usr/bin/poff: More than one pppd running and no -a option and
no arguments supplied. Nothing stopped.
sudo plog
Jan 29 08:52:44 comp pppd[1105]: Timeout waiting for PADO packets
Jan 29 08:52:44 comp pppd[1105]: Unable to complete PPPoE Discovery
Jan 29 08:53:40 comp pppd[2038]: Plugin rp-pppoe.so loaded.
Jan 29 08:53:40 comp pppd[2039]: pppd 2.4.4 started by root, uid 0
Jan 29 08:53:49 comp pppd[1105]: Timeout waiting for PADO packets
Jan 29 08:53:49 comp pppd[1105]: Unable to complete PPPoE Discovery
Jan 29 08:54:15 comp pppd[2039]: Timeout waiting for PADO packets
Jan 29 08:54:15 comp pppd[2039]: Unable to complete PPPoE DiscoveryAttachment:
interfaces
Description: Binary data
Attachment:
signature.asc
Description: This is a digitally signed message part