Bug#567352: linux-image-2.6.32-trunk-686-bigmem: DRM failure during boot
Package: linux-2.6
Version: 2.6.32-5
Severity: important
There is a regression from linux-image-2.6.31-1-686-bigmem to linux-image-2.6.32-trunk-686-bigmem. DRM fails during boot.
here's the excerpt from dmesg:
[ 0.967942] [drm] set up 15M of stolen space
[ 0.968030] nommu_map_sg: overflow 13d800000+4096 of device mask ffffffff
[ 0.968085] [drm:drm_agp_bind_pages] *ERROR* Failed to bind AGP memory: -12
[ 0.968159] [drm:i915_driver_load] *ERROR* failed to init modeset
[ 0.973067] i915: probe of 0000:00:02.0 failed with error -28
on linux-image-2.6.32-trunk-686 drm works fine:
[ 0.973466] [drm] set up 15M of stolen space
[ 1.907642] [drm] TV-16: set mode NTSC 480i 0
[ 2.137173] [drm] LVDS-8: set mode 1280x800 1f
[ 2.193497] Console: switching to colour frame buffer device 160x50
[ 2.197435] fb0: inteldrmfb frame buffer device
[ 2.197436] registered panic notifier
[ 2.197442] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on mi
There's a bug report and patch at freedesktop.org which seems to have solved the issue: http://bugs.freedesktop.org/show_bug.cgi?id=25690
-- Package-specific info:
** Version:
Linux version 2.6.32-trunk-686-bigmem (Debian 2.6.32-5) (ben@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sun Jan 10 07:12:17 UTC 2010
** Command line:
BOOT_IMAGE=//vmlinuz-2.6.32-trunk-686-bigmem root=/dev/mapper/lnx-deb ro quiet splash
** Tainted: P (1)
* Proprietary module has been loaded.
** Kernel log:
[ 2.717089] usb 7-1: configuration #1 chosen from 1 choice
[ 2.968008] usb 7-2: new full speed USB device using uhci_hcd and address 3
[ 3.159024] usb 7-2: New USB device found, idVendor=05ac, idProduct=022a
[ 3.159027] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.159029] usb 7-2: Product: Apple Internal Keyboard / Trackpad
[ 3.159031] usb 7-2: Manufacturer: Apple Computer
[ 3.159102] usb 7-2: configuration #1 chosen from 1 choice
[ 4.851098] udev: starting version 150
[ 5.319637] ACPI: AC Adapter [ADP1] (on-line)
[ 5.390526] applesmc: Apple MacBook 4 detected:
[ 5.390528] applesmc: - Model with accelerometer
[ 5.390530] applesmc: - Model without light sensors and backlight
[ 5.390531] applesmc: - Model with 10 temperature sensors
[ 5.393953] applesmc: device has already been initialized (0xe0, 0x00).
[ 5.393955] applesmc: device successfully initialized.
[ 5.395385] applesmc: 1 fans found.
[ 5.397678] input: applesmc as /devices/platform/applesmc.768/input/input5
[ 5.397697] applesmc: driver successfully loaded.
[ 5.598854] ACPI: SSDT beecaa98 00340 (v01 APPLE Cpu0Ist 00003000 INTL 20061109)
[ 5.599125] ACPI: SSDT beec8c18 002AD (v01 APPLE Cpu0Cst 00003001 INTL 20061109)
[ 5.600686] Monitor-Mwait will be used to enter C-1 state
[ 5.600801] Monitor-Mwait will be used to enter C-2 state
[ 5.600846] Monitor-Mwait will be used to enter C-3 state
[ 5.600850] Marking TSC unstable due to TSC halts in idle
[ 5.600922] processor LNXCPU:00: registered as cooling_device0
[ 5.601235] ACPI: SSDT beec9f18 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109)
[ 5.601442] ACPI: SSDT beec8f18 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109)
[ 5.601547] Switching to clocksource hpet
[ 5.602073] processor LNXCPU:01: registered as cooling_device1
[ 5.682155] ACPI: Battery Slot [BAT0] (battery present)
[ 5.892701] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 6.058556] usb 2-4: firmware: requesting isight.fw
[ 6.186894] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 20 (level, low) -> IRQ 20
[ 6.186899] ACPI: I/O resource 0000:00:1f.3 [0xefa0-0xefbf] conflicts with ACPI region SMBI [0xefa0-0xefaf]
[ 6.186976] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.281036] appletouch: Geyser mode initialized.
[ 6.281119] input: appletouch as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.1/input/input7
[ 6.281199] usbcore: registered new interface driver appletouch
[ 6.408677] Unable to load isight firmware
[ 6.408759] usbcore: registered new interface driver isight_firmware
[ 6.471731] usbcore: registered new interface driver hiddev
[ 6.488533] input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input8
[ 6.488602] generic-usb 0003:05AC:1000.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1a.0-1/input0
[ 6.488618] usbhid 3-1:1.1: couldn't find an input interrupt endpoint
[ 6.488767] usbcore: registered new interface driver usbhid
[ 6.488769] usbhid: v2.6:USB HID core driver
[ 6.517265] usb 3-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84
[ 6.618163] apple 0003:05AC:8242.0002: hiddev96,hidraw1: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-1/input0
[ 6.622321] input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0/input/input9
[ 6.622383] apple 0003:05AC:022A.0003: input,hidraw2: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2/input0
[ 6.625090] input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.2/input/input10
[ 6.625140] apple 0003:05AC:022A.0004: input,hidraw3: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2/input2
[ 6.788098] usb 3-1: USB disconnect, address 2
[ 7.052045] usb 3-1: new full speed USB device using uhci_hcd and address 3
[ 7.246271] usb 3-1: New USB device found, idVendor=05ac, idProduct=8205
[ 7.246277] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 7.246386] usb 3-1: configuration #1 chosen from 1 choice
[ 7.736617] Bluetooth: Core ver 2.15
[ 7.736713] NET: Registered protocol family 31
[ 7.736715] Bluetooth: HCI device and connection manager initialized
[ 7.736717] Bluetooth: HCI socket layer initialized
[ 7.819553] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 7.819695] usbcore: registered new interface driver btusb
[ 8.219989] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 8.220033] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 8.311687] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
[ 9.892007] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x00cb2001
[ 10.261995] Adding 4882804k swap on /dev/sda4. Priority:-1 extents:1 across:4882804k
[ 10.568038] EXT3 FS on dm-0, internal journal
[ 10.811952] lib80211: common routines for IEEE802.11 drivers
[ 10.811954] lib80211_crypt: registered algorithm 'NULL'
[ 10.912657] wl: module license 'unspecified' taints kernel.
[ 10.912660] Disabling lock debugging due to kernel taint
[ 10.915540] wl 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.915547] wl 0000:02:00.0: setting latency timer to 64
[ 10.935949] lib80211_crypt: registered algorithm 'TKIP'
[ 10.936037] eth1: Broadcom BCM4328 802.11 Wireless Controller 5.10.91.9
[ 14.329309] sky2 eth0: enabling interface
[ 14.329785] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.229757] fuse init (API version 7.13)
[ 17.296228] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 17.296680] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 23.756135] eth1: no IPv6 routers present
[ 27.993025] eth0: no IPv6 routers present
** Model information
not available
** Loaded modules:
Module Size Used by
usb_storage 29857 0
cpufreq_powersave 602 0
cpufreq_stats 1940 0
cpufreq_conservative 4018 0
cpufreq_userspace 1444 0
fuse 43554 1
ext2 46141 1
coretemp 3225 0
acpi_cpufreq 4907 0
lib80211_crypt_tkip 6677 0
wl 1254563 0
lib80211 2834 2 lib80211_crypt_tkip,wl
snd_hda_codec_realtek 162851 1
snd_hda_intel 15347 1
snd_hda_codec 46002 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 4054 1 snd_hda_codec
snd_pcm_oss 28479 0
btusb 8001 0
snd_mixer_oss 10461 1 snd_pcm_oss
bluetooth 36259 1 btusb
snd_pcm 47518 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
rfkill 10196 1 bluetooth
snd_seq_midi 3480 0
snd_rawmidi 12313 1 snd_seq_midi
snd_seq_midi_event 3684 1 snd_seq_midi
snd_seq 35303 2 snd_seq_midi,snd_seq_midi_event
snd_timer 12258 2 snd_pcm,snd_seq
snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq
snd 33551 13 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
hid_apple 3298 0
usbhid 26836 0
soundcore 3450 1 snd
hid 50545 2 hid_apple,usbhid
snd_page_alloc 5045 2 snd_hda_intel,snd_pcm
appletouch 6513 0
i2c_i801 6446 0
isight_firmware 1509 0
pcspkr 1207 0
evdev 5609 23
battery 3782 0
processor 25811 3 acpi_cpufreq
applesmc 14306 0
led_class 1757 1 applesmc
input_polldev 1479 1 applesmc
ac 1640 0
ext3 93828 1
jbd 31965 1 ext3
mbcache 3762 2 ext2,ext3
dm_mod 45854 7
sd_mod 25717 4
crc_t10dif 1012 1 sd_mod
ata_generic 2015 0
uhci_hcd 16033 0
ata_piix 16561 3
ide_pci_generic 1924 0
libata 114048 2 ata_generic,ata_piix
ehci_hcd 27626 0
firewire_ohci 16761 0
firewire_core 30955 1 firewire_ohci
sky2 33172 0
crc_itu_t 1035 1 firewire_core
ide_core 63922 1 ide_pci_generic
scsi_mod 101077 3 usb_storage,sd_mod,libata
usbcore 98278 8 usb_storage,btusb,usbhid,appletouch,isight_firmware,uhci_hcd,ehci_hcd
nls_base 4541 1 usbcore
thermal 9206 0
fan 2586 0
i915 217471 0
drm_kms_helper 17183 1 i915
i2c_algo_bit 3497 1 i915
button 3598 1 i915
video 14605 1 i915
thermal_sys 9378 4 processor,thermal,fan,video
output 1204 1 video
drm 108143 2 i915,drm_kms_helper
i2c_core 12612 4 i2c_i801,i915,i2c_algo_bit,drm
intel_agp 20409 1
agpgart 19576 3 drm,intel_agp
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 03)
Subsystem: Apple Computer Inc. Device [106b:00a1]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 03) (prog-if 00 [VGA controller])
Subsystem: Apple Computer Inc. Device [106b:00a1]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 27
Region 0: Memory at d0100000 (64-bit, non-prefetchable) [size=1M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 6110 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a03] (rev 03)
Subsystem: Apple Computer Inc. Device [106b:00a1]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at d0200000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 04) (prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 60c0 [size=32]
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 04) (prog-if 00 [UHCI])
Subsystem: Apple Computer Inc. Device [106b:00a1]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 16
Region 4: I/O ports at 60a0 [size=32]
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 04) (prog-if 20 [EHCI])
Subsystem: Apple Computer Inc. Device [106b:00a1]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 21
Region 0: Memory at d0704c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 04)
Subsystem: Apple Computer Inc. Device [106b:00a1]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at d0700000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d0600000-d06fffff
Prefetchable memory behind bridge: 00000000d0800000-00000000d09fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: d0500000-d05fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 [8086:2849] (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: d0400000-d04fffff
Prefetchable memory behind bridge: ffffffffd0a00000-00000000d0bfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 04) (prog-if 00 [UHCI])
Subsystem: Apple Computer Inc. Device [106b:00a1]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 6080 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 04) (prog-if 00 [UHCI])
Subsystem: Apple Computer Inc. Device [106b:00a1]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 18
Region 4: I/O ports at 6060 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 04) (prog-if 00 [UHCI])
Subsystem: Apple Computer Inc. Device [106b:00a1]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 21
Region 4: I/O ports at 6040 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 04) (prog-if 20 [EHCI])
Subsystem: Apple Computer Inc. Device [106b:00a1]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 20
Region 0: Memory at d0704800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f4) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
Memory behind bridge: d0300000-d03fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 04)
Subsystem: Apple Computer Inc. Device [106b:00a1]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 04) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Apple Computer Inc. Device [106b:00a1]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at 6108 [size=8]
Region 1: I/O ports at 6124 [size=4]
Region 2: I/O ports at 6100 [size=8]
Region 3: I/O ports at 6120 [size=4]
Region 4: I/O ports at 60e0 [size=16]
00:1f.2 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller [8086:2828] (rev 04) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Apple Computer Inc. Device [106b:00a1]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 18
Region 0: I/O ports at 60f8 [size=8]
Region 1: I/O ports at 611c [size=4]
Region 2: I/O ports at 60f0 [size=8]
Region 3: I/O ports at 6118 [size=4]
Region 4: I/O ports at 6020 [size=16]
Region 5: I/O ports at 4000 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 04)
Subsystem: Apple Computer Inc. Device [106b:00a1]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 20
Region 0: Memory at d0705000 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at efa0 [size=32]
02:00.0 Network controller [0280]: Broadcom Corporation BCM4328 802.11a/b/g/n [14e4:4328] (rev 03)
Subsystem: Apple Computer Inc. Device [106b:0088]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0500000 (64-bit, non-prefetchable) [size=16K]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=1M]
Capabilities: <access denied>
Kernel driver in use: wl
03:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. Marvell Yukon 88E8058 PCI-E Gigabit Ethernet Controller [11ab:436a] (rev 13)
Subsystem: Marvell Technology Group Ltd. Device [11ab:00ba]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 28
Region 0: Memory at d0400000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at 5000 [size=256]
Expansion ROM at d0a00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: sky2
04:03.0 FireWire (IEEE 1394) [0c00]: Agere Systems FW322/323 [11c1:5811] (rev 61) (prog-if 10 [OHCI])
Subsystem: Agere Systems FW322/323 [11c1:5811]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B+ DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 248 (3000ns min, 6000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at d0300000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
** USB devices:
Bus 003 Device 003: ID 05ac:8205 Apple, Inc. Bluetooth HCI
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 0bb4:0c02 High Tech Computer Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 003: ID 05ac:022a Apple, Inc. Internal Keyboard/Trackpad (MacBook Pro) (ISO)
Bus 007 Device 002: ID 05ac:8242 Apple, Inc. IR Receiver [built-in]
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 05ac:8300 Apple, Inc. Built-in iSight (no firmware loaded)
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (990, 'testing'), (99, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-trunk-686-bigmem (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=el_GR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.32-trunk-686-bigmem depends on:
ii debconf [debconf-2.0] 1.5.28 Debian configuration management sy
ii initramfs-tools [linux-initra 0.93.4 tools for generating an initramfs
ii module-init-tools 3.11-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-trunk-686-bigmem recommends:
ii firmware-linux-free 2.6.32-5 Binary firmware for various driver
ii libc6-i686 2.10.2-2 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.32-trunk-686-bigmem suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-trunk-686-bigmem is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
ii firmware-ralink 0.22 Binary firmware for Ralink RT2561,
-- debconf information excluded
Reply to: