[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#513050: marked as done (linux-image-2.6.26-1-686: Kernel Oops when reconnecting external usb soundcard)

Your message dated Wed, 20 Jan 2010 13:53:07 +0000
with message-id <E1NXazb-0003V8-Bw@ries.debian.org>
and subject line Bug#513050: fixed in user-mode-linux 2.6.26-1um-2+21
has caused the Debian Bug report #513050,
regarding linux-image-2.6.26-1-686: Kernel Oops when reconnecting external usb soundcard
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
513050: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=513050
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: linux-image-2.6.26-1-686
Version: 2.6.26-13
Severity: important

Kernel Oops when switching off and on again an external soundcard
(M-Audio Audiophile USB) while pulseaudio is running. Happens
regularly because the soundcard often needs a hard reset.

[ 3401.628008] usb 2-1: USB disconnect, address 3
[ 3401.653919] BUG: unable to handle kernel NULL pointer dereference at
00000008
[ 3401.653927] IP: [<f89aacc0>] :usbcore:hcd_buffer_free+0x10/0x63
[ 3401.653963] *pde = 00000000 
[ 3401.653968] Oops: 0000 [#1] SMP 
[ 3401.653971] Modules linked in: snd_usb_audio snd_usb_lib radeon drm
ppdev lp ipv6 battery binfmt_misc cpufreq_conservative cpufreq_powersave
cpufreq_userspace cpufreq_ondemand cpufreq_stats freq_table fuse sbp2
loop sd_mod usbhid hid ff_memless snd_intel8x0 snd_mpu401 snd_ac97_codec
ac97_bus snd_cs4232 3c59x sata_sil mii snd_opl3_lib snd_hwdep
snd_cs4231_lib snd_seq_dummy snd_pcm_oss snd_mixer_oss snd_pcm
snd_mpu401_uart ns558 gameport parport_pc parport snd_seq_oss
snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq floppy pcspkr
snd_timer snd_seq_device snd ohci1394 ieee1394 soundcore snd_page_alloc
shpchp pci_hotplug forcedeth ehci_hcd ohci_hcd button usbcore
i2c_nforce2 i2c_core nvidia_agp agpgart evdev ext3 jbd mbcache
sha256_generic aes_i586 aes_generic cbc dm_crypt crypto_blkcipher
dm_mirror dm_log dm_snapshot dm_mod ide_cd_mod cdrom thermal processor
fan thermal_sys ide_disk ide_pci_generic amd74xx ide_core ata_generic
libata scsi_mod dock
[ 3401.654035] 
[ 3401.654038] Pid: 3662, comm: pulseaudio Not tainted (2.6.26-1-686 #1)
[ 3401.654042] EIP: 0060:[<f89aacc0>] EFLAGS: 00010282 CPU: 0
[ 3401.654060] EIP is at hcd_buffer_free+0x10/0x63 [usbcore]
[ 3401.654063] EAX: 00000008 EBX: 00000008 ECX: 37f84040 EDX: f7f84040
[ 3401.654066] ESI: 00000010 EDI: eda841c0 EBP: ebcb7900 ESP: ecbd3ec8
[ 3401.654069]  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[ 3401.654073] Process pulseaudio (pid: 3662, ti=ecbd2000 task=f7cdeca0
task.ti=ecbd2000)
[ 3401.654075] Stack: eda842c0 f1989000 f8c5d9c8 37f84040 eda84210
00000000 f8c5da21 eed6a24c 
[ 3401.654083]        eed6a1a0 00001fff f89f61be ecb33be0 ed50a800
f897485d 00001000 ed50a800 
[ 3401.654089]        f89748be ed50a800 ed50a800 ebcb7900 f89715a9
ed568860 f8971f90 eed6a0a0 
[ 3401.654096] Call Trace:
[ 3401.654102]  [<f8c5d9c8>] snd_usbmidi_out_endpoint_delete+0x20/0x32
[snd_usb_lib]
[ 3401.654114]  [<f8c5da21>] snd_usbmidi_free+0x15/0x34 [snd_usb_lib]
[ 3401.654123]  [<f89f61be>] snd_rawmidi_free+0x68/0x74 [snd_rawmidi]
[ 3401.654136]  [<f897485d>] snd_device_free+0x56/0x8a [snd]
[ 3401.654157]  [<f89748be>] snd_device_free_all+0x2d/0x4b [snd]
[ 3401.654171]  [<f89715a9>] snd_card_do_free+0x38/0x9c [snd]
[ 3401.654183]  [<f8971f90>] snd_card_file_remove+0xb1/0xd6 [snd]
[ 3401.654196]  [<f8a4e3a5>] snd_pcm_release+0x84/0x8e [snd_pcm]
[ 3401.654221]  [<f8971e1b>] snd_disconnect_release+0x57/0x5a [snd]
[ 3401.654233]  [<c01750f3>] __fput+0x8a/0x135
[ 3401.654244]  [<c0165794>] remove_vma+0x25/0x43
[ 3401.654254]  [<c0166124>] do_munmap+0x181/0x19b
[ 3401.654267]  [<c016616e>] sys_munmap+0x30/0x3e
[ 3401.654273]  [<c0103853>] sysenter_past_esp+0x78/0xb1
[ 3401.654295]  =======================
[ 3401.654297] Code: eb 05 bf ed ff ff ff b8 6c de 9b f8 e8 be 9b 78 c7
89 f8 5b 5e 5f 5d c3 90 90 90 56 89 d6 89 ca 85 d2 53 89 c3 8b 4c 24 0c
74 50 <8b> 00 83 b8 e8 00 00 00 00 75 15 8b 83 b0 00 00 00 f6 40 10 02 
[ 3401.654328] EIP: [<f89aacc0>] hcd_buffer_free+0x10/0x63 [usbcore]
SS:ESP 0068:ecbd3ec8
[ 3401.654348] ---[ end trace bee24b80efb66c5a ]---
[ 3408.628032] usb 2-1: new full speed USB device using ohci_hcd and
address 4
[ 3408.880544] usb 2-1: config 1 interface 5 has no altsetting 3
[ 3408.891634] usb 2-1: configuration #1 chosen from 1 choice
[ 3409.164975] usb 2-1: New USB device found, idVendor=0763,
idProduct=2003
[ 3409.164982] usb 2-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 3409.164985] usb 2-1: Product: Audiophile USB (tm)
[ 3409.164988] usb 2-1: Manufacturer: M-Audio




-- Package-specific info:
** Version:
Linux version 2.6.26-1-686 (Debian 2.6.26-13) (waldi@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Sat Jan 10 18:29:31 UTC 2009

** Command line:
BOOT_IMAGE=/vmlinuz-2.6.26-1-686 root=/dev/mapper/hda2_crypt ro

** Not tainted

** Kernel log:
[   61.788310] hub 3-0:1.0: USB hub found
[   61.788365] hub 3-0:1.0: 6 ports detected
[   61.892149] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[   61.892206] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   61.892263] usb usb3: Product: EHCI Host Controller
[   61.892309] usb usb3: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
[   61.892357] usb usb3: SerialNumber: 0000:00:02.2
[   61.892855] ACPI: PCI Interrupt Link [APCM] enabled at IRQ 21
[   61.892905] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [APCM] -> GSI 21 (level, high) -> IRQ 21
[   61.893080] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[   61.944891] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21]  MMIO=[ea084000-ea0847ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[   61.950096] usb 2-2: USB disconnect, address 3
[   62.058974] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   62.184099] parport_pc 00:0c: reported by Plug and Play ACPI
[   62.184210] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[   62.323276] gameport: NS558 PnP Gameport is pnp00:0f/gameport0, io 0x201, speed 59659kHz
[   62.623389] ACPI: PCI Interrupt Link [AP3C] enabled at IRQ 20
[   62.623445] ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [AP3C] -> GSI 20 (level, high) -> IRQ 20
[   62.623575] 3c59x: Donald Becker and others.
[   62.623625] 0000:02:01.0: 3Com PCI 3c920 Tornado at f8a18000.
[   62.664579] sata_sil 0000:01:0b.0: version 2.3
[   62.664832] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[   62.664889] ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [APC3] -> GSI 18 (level, high) -> IRQ 18
[   62.672915] scsi0 : sata_sil
[   62.682117] scsi1 : sata_sil
[   62.682232] ata1: SATA max UDMA/100 mmio m512@0xe9000000 tf 0xe9000080 irq 18
[   62.682284] ata2: SATA max UDMA/100 mmio m512@0xe9000000 tf 0xe90000c0 irq 18
[   62.770184] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[   62.770240] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 22 (level, high) -> IRQ 22
[   62.770387] PCI: Setting latency timer of device 0000:00:06.0 to 64
[   62.820058] usb 2-1: new full speed USB device using ohci_hcd and address 4
[   63.024037] ata1: SATA link down (SStatus 0 SControl 310)
[   63.165489] ohci1394: fw-host0: SelfID received outside of bus reset sequence
[   63.165586] usb 2-1: config 1 interface 5 has no altsetting 3
[   63.165669] intel8x0_measure_ac97_clock: measured 126434 usecs
[   63.165718] intel8x0: clocking to 48000
[   63.176002] usb 2-1: configuration #1 chosen from 1 choice
[   63.184003] usb 2-1: New USB device found, idVendor=0763, idProduct=2003
[   63.184003] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   63.184064] usb 2-1: Product: Audiophile USB (tm)
[   63.184110] usb 2-1: Manufacturer: M-Audio
[   63.348058] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   63.404176] ata2.00: ATA-7: ST3320620AS, 3.AAC, max UDMA/133
[   63.404231] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   63.436317] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e0180000456abb]
[   63.479144] ata2.00: configured for UDMA/100
[   63.479322] scsi 1:0:0:0: Direct-Access     ATA      ST3320620AS      3.AA PQ: 0 ANSI: 5
[   63.488053] usb 2-2: new low speed USB device using ohci_hcd and address 5
[   63.701604] usb 2-2: configuration #1 chosen from 1 choice
[   63.704670] usb 2-2: New USB device found, idVendor=045e, idProduct=0040
[   63.704726] usb 2-2: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[   63.704776] usb 2-2: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
[   63.704825] usb 2-2: Manufacturer: Microsoft
[   63.952136] usbcore: registered new interface driver snd-usb-audio
[   63.957364] usbcore: registered new interface driver hiddev
[   63.962943] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /class/input/input4
[   63.988108] input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:02.1-2
[   63.988323] usbcore: registered new interface driver usbhid
[   63.988372] usbhid: v2.6:USB HID core driver
[   64.896820] Driver 'sd' needs updating - please use bus_type methods
[   64.896995] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[   64.897066] sd 1:0:0:0: [sda] Write Protect is off
[   64.897114] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   64.897150] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   64.897279] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[   64.897346] sd 1:0:0:0: [sda] Write Protect is off
[   64.897394] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   64.897426] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   64.897489]  sda: sda1
[   64.918453] sd 1:0:0:0: [sda] Attached SCSI disk
[   66.499187] EXT3 FS on dm-0, internal journal
[   66.610078] loop: module loaded
[   74.515427] kjournald starting.  Commit interval 5 seconds
[   74.515427] EXT3 FS on hda1, internal journal
[   74.515427] EXT3-fs: mounted filesystem with ordered data mode.
[   74.542598] kjournald starting.  Commit interval 5 seconds
[   74.544172] EXT3 FS on dm-4, internal journal
[   74.544252] EXT3-fs: mounted filesystem with ordered data mode.
[   74.592744] Adding 2931336k swap on /dev/mapper/hda5_crypt.  Priority:-1 extents:1 across:2931336k
[   75.063726] fuse init (API version 7.9)
[   77.252977] NET: Registered protocol family 10
[   77.253553] lo: Disabled Privacy Extensions
[   87.484005] eth0: no IPv6 routers present
[   95.044705] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
[   96.852703] lp0: using parport0 (interrupt-driven).
[   96.897317] ppdev: user-space parallel port driver
[   97.082199] eth1:  setting half-duplex.
[   97.083232] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   98.910754] [drm] Initialized drm 1.1.0 20060810
[   98.922528] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[   98.922543] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 19
[   98.922627] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[  100.563965] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[  100.563994] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[  100.564084] agpgart: Putting AGP V3 device at 0000:03:00.0 into 8x mode
[  100.960006] [drm] Setting GART location based on new memory map
[  100.960006] [drm] Loading R300 Microcode
[  100.960006] [drm] Num pipes: 1
[  100.960006] [drm] writeback test succeeded in 1 usecs
[  111.772018] eth0: no IPv6 routers present

** Loaded modules:
Module                  Size  Used by
radeon                118688  2 
drm                    65256  3 radeon
ppdev                   6468  0 
lp                      8164  0 
battery                10180  0 
binfmt_misc             7528  1 
cpufreq_conservative     5960  0 
cpufreq_powersave       1856  0 
cpufreq_userspace       3172  0 
cpufreq_ondemand        6476  0 
cpufreq_stats           3776  0 
freq_table              4224  2 cpufreq_ondemand,cpufreq_stats
ipv6                  235300  22 
fuse                   42908  1 
sbp2                   18572  0 
loop                   12748  0 
sd_mod                 22200  2 
usbhid                 35904  0 
hid                    33184  1 usbhid
ff_memless              4392  1 usbhid
snd_usb_audio          70272  0 
snd_usb_lib            13440  1 snd_usb_audio
snd_mpu401              6152  0 
snd_intel8x0           26268  2 
snd_ac97_codec         88484  1 snd_intel8x0
ac97_bus                1728  1 snd_ac97_codec
sata_sil                7176  2 
3c59x                  35624  0 
mii                     4896  1 3c59x
snd_seq_dummy           2660  0 
snd_cs4232             11380  0 
snd_opl3_lib            9344  1 snd_cs4232
snd_hwdep               6212  2 snd_usb_audio,snd_opl3_lib
snd_cs4231_lib         20512  1 snd_cs4232
snd_pcm_oss            32800  0 
snd_mixer_oss          12320  1 snd_pcm_oss
snd_pcm                62596  5 snd_usb_audio,snd_intel8x0,snd_ac97_codec,snd_cs4231_lib,snd_pcm_oss
snd_mpu401_uart         6368  2 snd_mpu401,snd_cs4232
ns558                   3712  0 
gameport               10700  2 ns558
parport_pc             22500  1 
parport                30988  3 ppdev,lp,parport_pc
snd_seq_oss            24992  0 
snd_seq_midi            5728  0 
snd_rawmidi            18496  3 snd_usb_lib,snd_mpu401_uart,snd_seq_midi
snd_seq_midi_event      6432  2 snd_seq_oss,snd_seq_midi
snd_seq                41456  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
floppy                 47716  0 
pcspkr                  2432  0 
snd_timer              17800  4 snd_opl3_lib,snd_cs4231_lib,snd_pcm,snd_seq
snd_seq_device          6380  6 snd_seq_dummy,snd_opl3_lib,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd                    45604  21 snd_usb_audio,snd_mpu401,snd_intel8x0,snd_ac97_codec,snd_cs4232,snd_opl3_lib,snd_hwdep,snd_cs4231_lib,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_mpu401_uart,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
ohci1394               24944  0 
ieee1394               75800  2 sbp2,ohci1394
soundcore               6368  1 snd
snd_page_alloc          7816  3 snd_intel8x0,snd_cs4231_lib,snd_pcm
shpchp                 25528  0 
pci_hotplug            23460  1 shpchp
ehci_hcd               28428  0 
forcedeth              45072  0 
ohci_hcd               18500  0 
button                  6096  0 
usbcore               118160  6 usbhid,snd_usb_audio,snd_usb_lib,ehci_hcd,ohci_hcd
i2c_nforce2             5536  0 
i2c_core               19828  1 i2c_nforce2
nvidia_agp              6108  1 
agpgart                28776  2 drm,nvidia_agp
evdev                   8000  3 
ext3                  105512  3 
jbd                    39444  1 ext3
mbcache                 7108  1 ext3
sha256_generic         11360  0 
aes_i586                7744  8 
aes_generic            29256  1 aes_i586
cbc                     3264  4 
dm_crypt               11172  1 
crypto_blkcipher       15236  6 cbc,dm_crypt
dm_mirror              15104  0 
dm_log                  8452  1 dm_mirror
dm_snapshot            14340  0 
dm_mod                 46184  15 dm_crypt,dm_mirror,dm_log,dm_snapshot
ide_cd_mod             27652  0 
cdrom                  30176  1 ide_cd_mod
thermal                15228  0 
processor              32576  1 thermal
fan                     4164  0 
thermal_sys            10856  3 thermal,processor,fan
ide_disk               10496  5 
ide_pci_generic         3908  0 [permanent]
amd74xx                 7752  0 [permanent]
ide_core               96168  4 ide_cd_mod,ide_disk,ide_pci_generic,amd74xx
ata_generic             4676  0 
libata                140384  2 sata_sil,ata_generic
scsi_mod              129356  3 sbp2,sd_mod,libata
dock                    8304  1 libata

** PCI devices:
00:00.0 Host bridge [0600]: nVidia Corporation nForce2 IGP2 [10de:01e0] (rev c1)
	Subsystem: ASUSTeK Computer Inc. Device [1043:80ac]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
	Capabilities: <access denied>
	Kernel driver in use: agpgart-nvidia
	Kernel modules: nvidia-agp

00:00.1 RAM memory [0500]: nVidia Corporation nForce2 Memory Controller 1 [10de:01eb] (rev c1)
	Subsystem: ASUSTeK Computer Inc. Device [1043:80ac]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:00.2 RAM memory [0500]: nVidia Corporation nForce2 Memory Controller 4 [10de:01ee] (rev c1)
	Subsystem: ASUSTeK Computer Inc. Device [1043:80ac]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:00.3 RAM memory [0500]: nVidia Corporation nForce2 Memory Controller 3 [10de:01ed] (rev c1)
	Subsystem: ASUSTeK Computer Inc. Device [1043:80ac]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:00.4 RAM memory [0500]: nVidia Corporation nForce2 Memory Controller 2 [10de:01ec] (rev c1)
	Subsystem: ASUSTeK Computer Inc. Device [1043:80ac]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:00.5 RAM memory [0500]: nVidia Corporation nForce2 Memory Controller 5 [10de:01ef] (rev c1)
	Subsystem: ASUSTeK Computer Inc. Device [1043:80ac]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:01.0 ISA bridge [0601]: nVidia Corporation nForce2 ISA Bridge [10de:0060] (rev a4)
	Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard [1043:80ad]
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:01.1 SMBus [0c05]: nVidia Corporation nForce2 SMBus (MCP) [10de:0064] (rev a2)
	Subsystem: ASUSTeK Computer Inc. Device [1043:0c11]
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at dc00 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: nForce2_smbus
	Kernel modules: i2c-nforce2

00:02.0 USB Controller [0c03]: nVidia Corporation nForce2 USB Controller [10de:0067] (rev a4) (prog-if 10 [OHCI])
	Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard [1043:0c11]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 22
	Region 0: Memory at ea087000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: ohci_hcd
	Kernel modules: ohci-hcd

00:02.1 USB Controller [0c03]: nVidia Corporation nForce2 USB Controller [10de:0067] (rev a4) (prog-if 10 [OHCI])
	Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard [1043:0c11]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin B routed to IRQ 21
	Region 0: Memory at ea082000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: ohci_hcd
	Kernel modules: ohci-hcd

00:02.2 USB Controller [0c03]: nVidia Corporation nForce2 USB Controller [10de:0068] (rev a4) (prog-if 20 [EHCI])
	Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard [1043:0c11]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin C routed to IRQ 22
	Region 0: Memory at ea083000 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd

00:04.0 Ethernet controller [0200]: nVidia Corporation nForce2 Ethernet Controller [10de:0066] (rev a1)
	Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard onboard nForce2 Ethernet [1043:80a7]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (250ns min, 5000ns max)
	Interrupt: pin A routed to IRQ 20
	Region 0: Memory at ea086000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at e000 [size=8]
	Capabilities: <access denied>
	Kernel driver in use: forcedeth
	Kernel modules: forcedeth

00:05.0 Multimedia audio controller [0401]: nVidia Corporation nForce Audio Processing Unit [10de:006b] (rev a2)
	Subsystem: ASUSTeK Computer Inc. Device [1043:0c11]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (250ns min, 3000ns max)
	Interrupt: pin A routed to IRQ 5
	Region 0: Memory at ea000000 (32-bit, non-prefetchable) [size=512K]
	Capabilities: <access denied>

00:06.0 Multimedia audio controller [0401]: nVidia Corporation nForce2 AC97 Audio Controler (MCP) [10de:006a] (rev a1)
	Subsystem: ASUSTeK Computer Inc. nForce2 AC97 Audio Controler (MCP) [1043:8095]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (500ns min, 1250ns max)
	Interrupt: pin A routed to IRQ 22
	Region 0: I/O ports at e400 [size=256]
	Region 1: I/O ports at d000 [size=128]
	Region 2: Memory at ea080000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: Intel ICH
	Kernel modules: snd-intel8x0

00:08.0 PCI bridge [0604]: nVidia Corporation nForce2 External PCI Bridge [10de:006c] (rev a3) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
	I/O behind bridge: 00009000-0000afff
	Memory behind bridge: e8000000-e9ffffff
	Prefetchable memory behind bridge: 50000000-500fffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Kernel modules: shpchp

00:09.0 IDE interface [0101]: nVidia Corporation nForce2 IDE [10de:0065] (rev a2) (prog-if 8a [Master SecP PriP])
	Subsystem: ASUSTeK Computer Inc. Device [1043:0c11]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
	Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
	Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
	Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
	Region 4: I/O ports at f000 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: AMD_IDE
	Kernel modules: amd74xx

00:0c.0 PCI bridge [0604]: nVidia Corporation nForce2 PCI Bridge [10de:006d] (rev a3) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
	I/O behind bridge: 0000b000-0000bfff
	Memory behind bridge: e4000000-e5ffffff
	Prefetchable memory behind bridge: 50100000-501fffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Kernel modules: shpchp

00:0d.0 FireWire (IEEE 1394) [0c00]: nVidia Corporation nForce2 FireWire (IEEE 1394) Controller [10de:006e] (rev a3) (prog-if 10 [OHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:809a]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 21
	Region 0: Memory at ea084000 (32-bit, non-prefetchable) [size=2K]
	Region 1: Memory at ea085000 (32-bit, non-prefetchable) [size=64]
	Capabilities: <access denied>
	Kernel driver in use: ohci1394
	Kernel modules: ohci1394

00:1e.0 PCI bridge [0604]: nVidia Corporation nForce2 AGP [10de:01e8] (rev c1) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
	I/O behind bridge: 0000c000-0000cfff
	Memory behind bridge: e6000000-e7ffffff
	Prefetchable memory behind bridge: c0000000-dfffffff
	Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Kernel modules: shpchp

01:0b.0 RAID bus controller [0104]: Silicon Image, Inc. SiI 3112 [SATALink/SATARaid] Serial ATA Controller [1095:3112] (rev 02)
	Subsystem: Silicon Image, Inc. SiI 3112 SATARaid Controller [1095:6112]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 18
	Region 0: I/O ports at 9000 [size=8]
	Region 1: I/O ports at 9400 [size=4]
	Region 2: I/O ports at 9800 [size=8]
	Region 3: I/O ports at 9c00 [size=4]
	Region 4: I/O ports at a000 [size=16]
	Region 5: Memory at e9000000 (32-bit, non-prefetchable) [size=512]
	[virtual] Expansion ROM at 50000000 [disabled] [size=512K]
	Capabilities: <access denied>
	Kernel driver in use: sata_sil
	Kernel modules: sata_sil

02:01.0 Ethernet controller [0200]: 3Com Corporation 3C920B-EMB Integrated Fast Ethernet Controller [Tornado] [10b7:9201] (rev 40)
	Subsystem: ASUSTeK Computer Inc. A7N8X Deluxe onboard 3C920B-EMB Integrated Fast Ethernet Controller [1043:80ab]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (2500ns min, 2500ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 20
	Region 0: I/O ports at b000 [size=128]
	Region 1: Memory at e5000000 (32-bit, non-prefetchable) [size=128]
	[virtual] Expansion ROM at 50100000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: 3c59x
	Kernel modules: 3c59x

03:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV350 AP [Radeon 9600] [1002:4150] (prog-if 00 [VGA controller])
	Subsystem: Connect Components Ltd Radeon 9600 256Mb Primary [17ee:2002]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (2000ns min), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M]
	Region 1: I/O ports at c000 [size=256]
	Region 2: Memory at e7000000 (32-bit, non-prefetchable) [size=64K]
	[virtual] Expansion ROM at e6000000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel modules: radeonfb

03:00.1 Display controller [0380]: ATI Technologies Inc RV350 AP [Radeon 9600] (Secondary) [1002:4170]
	Subsystem: Connect Components Ltd Radeon 9600 256Mb (Secondary) [17ee:2003]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Region 0: Memory at d0000000 (32-bit, prefetchable) [disabled] [size=256M]
	Region 1: Memory at e7010000 (32-bit, non-prefetchable) [disabled] [size=64K]
	Capabilities: <access denied>



-- System Information:
Debian Release: 5.0
  APT prefers testing
  APT policy: (990, 'testing'), (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.26-1-686 depends on:
ii  debconf [debconf-2.0]         1.5.24     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.92o      tools for generating an initramfs
ii  module-init-tools             3.4-1      tools for managing Linux kernel mo

Versions of packages linux-image-2.6.26-1-686 recommends:
ii  libc6-i686                    2.7-18     GNU C Library: Shared libraries [i

Versions of packages linux-image-2.6.26-1-686 suggests:
ii  grub-pc [grub]          1.96+20080724-12 GRand Unified Bootloader, version 
pn  linux-doc-2.6.26        <none>           (no description available)

-- debconf information excluded

--- End Message ---
--- Begin Message --- 
Source: user-mode-linux
Source-Version: 2.6.26-1um-2+21

We believe that the bug you reported is fixed in the latest version of
user-mode-linux, which is due to be installed in the Debian FTP archive:

user-mode-linux_2.6.26-1um-2+21.diff.gz
  to main/u/user-mode-linux/user-mode-linux_2.6.26-1um-2+21.diff.gz
user-mode-linux_2.6.26-1um-2+21.dsc
  to main/u/user-mode-linux/user-mode-linux_2.6.26-1um-2+21.dsc
user-mode-linux_2.6.26-1um-2+21_i386.deb
  to main/u/user-mode-linux/user-mode-linux_2.6.26-1um-2+21_i386.deb



A summary of the changes between this version and the previous one is
attached.

Thank you for reporting the bug, which will now be closed.  If you
have further comments please address them to 513050@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.

Debian distribution maintenance software
pp.
dann frazier <dannf@debian.org> (supplier of updated user-mode-linux package)

(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@debian.org)


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Format: 1.8
Date: Tue, 19 Jan 2010 18:32:16 -0700
Source: user-mode-linux
Binary: user-mode-linux
Architecture: source i386
Version: 2.6.26-1um-2+21
Distribution: stable
Urgency: high
Maintainer: User Mode Linux Maintainers <pkg-uml-pkgs@lists.alioth.debian.org>
Changed-By: dann frazier <dannf@debian.org>
Description: 
 user-mode-linux - User-mode Linux (kernel)
Closes: 332942 444043 513050 522922 550898 552465 558426 559064
Changes: 
 user-mode-linux (2.6.26-1um-2+21) stable; urgency=high
 .
   * Rebuild against linux-source-2.6.26 (2.6.26-21):
     [ Ben Hutchings ]
     * Fix false soft lockup reports for the nohz idle loop
     * nohz: Fix two bugs that can keep a processor idle and lead to a
       system hang (may fix #496917, #538158 and others)
     * usbmidi: Fix crash when device is disconnected (Closes: #513050)
     * r8169: Apply various upstream bug fixes
     * r8169: Add support for RTL8101e (v2), RTL8102e (v1,v2,v3),
       RTL8168c/8111c (v3,v4), RTL8168cp/8111cp (v2,v3), RTL8168d (v1)
       (Closes: #552465; may fix #516187)
     * Revert patch to sanitise <linux/socket.h>, which introduced
       different build failures
     * usbnet: Set link down initially for drivers that update link state
       (Closes: #444043)
     * atl1e: Remove broken implementation of TSO for TCP/IPv6
       (Closes: #558426) and allow other hardware offloads to be disabled in
       case they are also buggy
 .
     [ dann frazier ]
     * floppy: request and release only the ports we actually use
       (Closes: #332942)
     * igb: Add 82576 MAC support (Closes: #522922), backport
       by Ben Hutchings
     * [SCSI] gdth: Prevent negative offsets in ioctl (CVE-2009-3080)
     * NFSv4: Fix a problem whereby a buggy server can oops the kernel
       (CVE-2009-3726)
     * [SCSI] megaraid_sas: remove sysfs dbg_lvl world writeable permissions
       (CVE-2009-3889)
     * isdn: hfc_usb: Fix read buffer overflow (CVE-2009-4005)
     * fuse: prevent fuse_put_request on invalid pointer (CVE-2009-4021)
     * hpilo: new PCI ID (Closes: #559064)
     * Avoid /proc/$pid/maps visibility during initial setuid ELF loading
       (CVE-2009-2691)
     * hfs: fix a potential buffer overflow (CVE-2009-4020)
     * KVM: x86 emulator: limit instructions to 15 bytes (CVE-2009-4031)
     * firewire: ohci: handle receive packets with a data length of zero
       (CVE-2009-4138)
     * ext4: Avoid null pointer dereference when decoding EROFS w/o a journal
       (CVE-2009-4308)
     * s390: dasd diag - add support for read-only minidisks (Closes: #550898)
Checksums-Sha1: 
 ad9733dc7c4cd8fdff5904c8f1961d52db3977ed 1243 user-mode-linux_2.6.26-1um-2+21.dsc
 7ac14a7b6bb60654cb8c9595b75632a115bb4758 16601 user-mode-linux_2.6.26-1um-2+21.diff.gz
 6bc0fca4ea3760d9b3612801856050adf74a0a2c 5361360 user-mode-linux_2.6.26-1um-2+21_i386.deb
Checksums-Sha256: 
 3c1b24b7e98b96388cc8286d2056cef9a05079e340dfa079ea2dba8cfc42cc1e 1243 user-mode-linux_2.6.26-1um-2+21.dsc
 2fe9ce7d52a67a16bcb3a2c55988e4e4e7563d5f2c5db54d457060fbce813d3a 16601 user-mode-linux_2.6.26-1um-2+21.diff.gz
 7133e262a90829a6545b5fb5bb9d4cdac5f6c2f9d80319d782288c967c655275 5361360 user-mode-linux_2.6.26-1um-2+21_i386.deb
Files: 
 d986558a5d4929a2134d3fab8fcf73df 1243 misc extra user-mode-linux_2.6.26-1um-2+21.dsc
 3e654c18d23bc4bb3691b755d9ad45b0 16601 misc extra user-mode-linux_2.6.26-1um-2+21.diff.gz
 d08d51158ebf10e4fe55806ddee50cb8 5361360 misc extra user-mode-linux_2.6.26-1um-2+21_i386.deb

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)

iD8DBQFLVmYZhuANDBmkLRkRAj/YAKCOa3bHPPEJ1vRltHg/9EJutiyXyACdFnj4
lVFuVqQHFe1gqZMycEr/wWg=
=I7b2
-----END PGP SIGNATURE-----

--- End Message ---
Reply to: