Bug#565235: PC Speaker does not work
Package: linux-2.6
Version: 2.6.32-5
Severity: normal
My speaker will not beep, as of this update. I've tried rmmod'ing and
modprobe'ing the pcspkr module multiple times, but the beep still won't
return.
-- Package-specific info:
** Version:
Linux version 2.6.32-trunk-amd64 (Debian 2.6.32-5) (ben@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sun Jan 10 22:40:40 UTC 2010
** Command line:
BOOT_IMAGE=//vmlinuz-2.6.32-trunk-amd64 root=/dev/mapper/c--68--40--176--142-root ro quiet
** Tainted: P (1)
* Proprietary module has been loaded.
** Kernel log:
[ 0.892919] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.892971] usb usb8: configuration #1 chosen from 1 choice
[ 0.892997] hub 8-0:1.0: USB hub found
[ 0.893002] hub 8-0:1.0: 2 ports detected
[ 1.131821] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 1.170365] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.170395] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.170422] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.268713] usb 1-1: New USB device found, idVendor=03f0, idProduct=5711
[ 1.268716] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.268718] usb 1-1: Product: Photosmart C4100 series
[ 1.268720] usb 1-1: Manufacturer: HP
[ 1.268722] usb 1-1: SerialNumber: MY6C8H50QK04J7
[ 1.268787] usb 1-1: configuration #1 chosen from 1 choice
[ 1.274634] Initializing USB Mass Storage driver...
[ 1.274739] scsi8 : SCSI emulation for USB Mass Storage devices
[ 1.274800] usb-storage: device found at 2
[ 1.274803] usb-storage: waiting for device to settle before scanning
[ 1.274811] usbcore: registered new interface driver usb-storage
[ 1.274814] USB Mass Storage support registered.
[ 1.323951] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.332084] ata5.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7
[ 1.332087] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.340113] ata5.00: configured for UDMA/133
[ 1.478641] ata2.00: SATA link down (SStatus 0 SControl 300)
[ 1.478653] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 1.624049] ata1.00: SATA link down (SStatus 0 SControl 300)
[ 1.624059] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.632007] usb 4-2: new low speed USB device using uhci_hcd and address 2
[ 1.640197] ata1.01: ATAPI: TSSTcorp CDDVDW SH-S203N, SB01, max UDMA/100
[ 1.656197] ata1.01: configured for UDMA/100
[ 1.657364] scsi 0:0:1:0: CD-ROM TSSTcorp CDDVDW SH-S203N SB01 PQ: 0 ANSI: 5
[ 1.813054] usb 4-2: New USB device found, idVendor=045e, idProduct=0040
[ 1.813056] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.813059] usb 4-2: Product: Microsoft Wheel Mouse Optical®
[ 1.813061] usb 4-2: Manufacturer: Microsoft
[ 1.813125] usb 4-2: configuration #1 chosen from 1 choice
[ 1.823470] scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
[ 1.824679] firewire_ohci 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.833452] Uniform Multi-Platform E-IDE driver
[ 1.840262] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.840306] sd 4:0:0:0: [sda] Write Protect is off
[ 1.840308] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.840330] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.840454] sda:sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.850092] Uniform CD-ROM driver Revision: 3.20
[ 1.850169] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 1.858721] sda1 sda2 < sda5 >
[ 1.878800] sd 4:0:0:0: [sda] Attached SCSI disk
[ 1.881710] usbcore: registered new interface driver hiddev
[ 1.884971] sr 0:0:1:0: Attached scsi generic sg0 type 5
[ 1.885049] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 1.896281] input: Microsoft Microsoft Wheel Mouse Optical® as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input4
[ 1.896337] generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical®] on usb-0000:00:1a.1-2/input0
[ 1.896368] usbcore: registered new interface driver usbhid
[ 1.896370] usbhid: v2.6:USB HID core driver
[ 1.896525] firewire_ohci: Added fw-ohci device 0000:04:02.0, OHCI version 1.10
[ 2.062461] device-mapper: uevent: version 1.0.3
[ 2.062598] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 2.276975] EXT4-fs (dm-0): mounted filesystem with ordered data mode
[ 2.397579] firewire_core: created device fw0: GUID 00508d0000b115f4, S400
[ 3.581997] udev: starting version 150
[ 4.072603] processor LNXCPU:00: registered as cooling_device0
[ 4.072699] processor LNXCPU:01: registered as cooling_device1
[ 4.072740] processor LNXCPU:02: registered as cooling_device2
[ 4.072869] processor LNXCPU:03: registered as cooling_device3
[ 4.085847] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 4.115937] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 4.440696] usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5711
[ 4.440720] usbcore: registered new interface driver usblp
[ 4.656293] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 4.656386] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 4.737972] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 6.129088] loop: module loaded
[ 6.268139] usb-storage: device scan complete
[ 6.268520] scsi 8:0:0:0: Direct-Access HP Photosmart C4180 1.00 PQ: 0 ANSI: 2
[ 6.268891] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 6.270126] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[ 7.550371] kjournald starting. Commit interval 5 seconds
[ 7.550697] EXT3 FS on sda5, internal journal
[ 7.550701] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.605811] Adding 18354168k swap on /dev/mapper/c--68--40--176--142-swap_1. Priority:-1 extents:1 across:18354168k
[ 8.799439] r8169: eth0: link up
[ 12.499038] lp: driver loaded but no devices found
[ 12.614073] ppdev: user-space parallel port driver
[ 15.189604] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 18.856504] eth0: no IPv6 routers present
[ 21.422990] nvidia: module license 'NVIDIA' taints kernel.
[ 21.422993] Disabling lock debugging due to kernel taint
[ 21.916202] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 21.916210] nvidia 0000:01:00.0: setting latency timer to 64
[ 21.916447] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 190.42 Tue Oct 20 20:25:42 PDT 2009
[ 32.103373] padlock: VIA PadLock not detected.
[ 32.164574] Intel AES-NI instructions are not detected.
[ 210.749821] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 216.512620] IPv6 over IPv4 tunneling driver
[ 216.512959] sit0: Disabled Privacy Extensions
[ 216.513708] he-ipv6: Disabled Privacy Extensions
[ 223.074588] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 481.314353] input: PC Speaker as /devices/platform/pcspkr/input/input9
** Model information
sys_vendor: OEM
product_name: OEM
product_version: OEM
chassis_vendor: OEM
chassis_version: OEM
bios_vendor: Phoenix Technologies, LTD
bios_version: 6.00 PG
board_vendor: http://www.abit.com.tw/
board_name: IP35 PRO(P35+ICH9R)
board_version: 1.x (BIOS:10)
** Loaded modules:
Module Size Used by
pcspkr 1699 0
sit 8176 0
tunnel4 1973 1 sit
tcp_diag 880 0
inet_diag 6882 1 tcp_diag
cryptd 5366 0
aes_x86_64 7340 1
aes_generic 25714 1 aes_x86_64
ecb 1841 1
ecryptfs 79329 1
nvidia 9495541 28
iptable_filter 2258 1
ip_tables 13899 1 iptable_filter
x_tables 12813 1 ip_tables
ppdev 5030 0
lp 7462 0
parport 27938 2 ppdev,lp
binfmt_misc 6431 1
ext3 106454 1
jbd 37037 1 ext3
loop 11767 0
firewire_sbp2 11450 0
snd_hda_codec_realtek 235095 1
snd_hda_intel 18147 3
snd_hda_codec 54212 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 5364 1 snd_hda_codec
snd_pcm_oss 32399 0
snd_mixer_oss 12606 1 snd_pcm_oss
snd_pcm 60615 4 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_midi 4208 0
snd_rawmidi 15291 1 snd_seq_midi
snd_seq_midi_event 4628 1 snd_seq_midi
snd_seq 42769 2 snd_seq_midi,snd_seq_midi_event
usblp 9571 0
snd_timer 15502 3 snd_pcm,snd_seq
snd_seq_device 4477 3 snd_seq_midi,snd_rawmidi,snd_seq
snd 44718 15 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 4598 1 snd
snd_page_alloc 6217 2 snd_hda_intel,snd_pcm
i2c_i801 7766 0
i2c_core 15584 2 nvidia,i2c_i801
evdev 7336 11
processor 29479 0
ext4 285067 1
mbcache 4970 2 ext3,ext4
jbd2 66855 1 ext4
crc16 1319 1 ext4
dm_mod 53658 6
sg 18728 0
usbhid 31196 0
sr_mod 12602 0
hid 62745 1 usbhid
sd_mod 29673 3
crc_t10dif 1276 1 sd_mod
cdrom 29399 1 sr_mod
ide_pci_generic 2788 0
ide_core 76802 1 ide_pci_generic
firewire_ohci 19452 0
usb_storage 38585 0
ata_generic 2983 0
uhci_hcd 18457 0
ahci 31494 0
pata_jmicron 2280 0
firewire_core 36560 2 firewire_sbp2,firewire_ohci
crc_itu_t 1307 1 firewire_core
r8169 28765 0
mii 3210 1 r8169
ata_piix 19757 2
libata 131655 4 ata_generic,ahci,pata_jmicron,ata_piix
ehci_hcd 30578 0
scsi_mod 121909 6 firewire_sbp2,sg,sr_mod,sd_mod,usb_storage,libata
intel_agp 25521 0
floppy 49087 0
button 4634 0
usbcore 121687 6 usblp,usbhid,usb_storage,uhci_hcd,ehci_hcd
nls_base 6377 1 usbcore
agpgart 24733 2 nvidia,intel_agp
thermal 11674 0
fan 3346 0
thermal_sys 11878 3 processor,thermal,fan
** Network interface configuration:
auto lo
iface lo inet loopback
allow-hotplug eth0
iface eth0 inet dhcp
iface he-ipv6 inet6 v4tunnel
address 2001:470:1f10:437::2
netmask 64
endpoint 209.51.181.2
router 2001:470:1f10:437::1
ttl 255
up ip link set mtu 1280 dev $IFACE
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000
link/ether 00:50:8d:b5:37:59 brd ff:ff:ff:ff:ff:ff
inet 68.40.183.39/21 brd 255.255.255.255 scope global eth0
inet6 fe80::250:8dff:feb5:3759/64 scope link
valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 00:50:8d:b5:37:5a brd ff:ff:ff:ff:ff:ff
4: sit0: <NOARP> mtu 1480 qdisc noop state DOWN
link/sit 0.0.0.0 brd 0.0.0.0
5: he-ipv6: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1480 qdisc noqueue state UNKNOWN
link/sit 68.40.183.39 peer 209.51.181.2
inet6 2001:470:1f11:2ba:0:50:8db5:3759/128 scope global
valid_lft forever preferred_lft forever
inet6 2001:470:1f10:2ba::2/64 scope global
valid_lft forever preferred_lft forever
inet6 fe80::4428:b727/128 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 129838 333 0 0 0 0 0 0 129838 333 0 0 0 0 0 0
eth0: 6109186 24406 0 0 0 0 0 0 347001 3333 0 0 0 0 0 0
eth1: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
sit0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
he-ipv6: 67647 115 0 0 0 0 0 0 13096 120 0 0 0 0 0 0
*** Protocol statistics:
Ip:
4800 total packets received
3 with invalid addresses
0 forwarded
0 incoming packets discarded
4797 incoming packets delivered
3657 requests sent out
Icmp:
10 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 10
1 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 1
IcmpMsg:
InType3: 10
OutType3: 1
Tcp:
82 active connections openings
22 passive connection openings
1 failed connection attempts
1 connection resets received
6 connections established
4407 segments received
3301 segments send out
36 segments retransmited
1 bad segments received.
31 resets sent
Udp:
378 packets received
1 packets to unknown port received.
0 packet receive errors
318 packets sent
UdpLite:
TcpExt:
35 TCP sockets finished time wait in fast timer
108 delayed acks sent
Quick ack mode was activated 3 times
151 packets directly queued to recvmsg prequeue.
58177 bytes directly received in process context from prequeue
3220 packet headers predicted
41 packets header predicted and directly queued to user
244 acknowledgments not containing data payload received
269 predicted acknowledgments
8 other TCP timeouts
3 DSACKs sent for old packets
1 DSACKs received
6 connections reset due to unexpected data
4 connections reset due to early user close
3 connections aborted due to timeout
TCPDSACKIgnoredOld: 1
IpExt:
InBcastPkts: 70
InOctets: 4980146
OutOctets: 429109
InBcastOctets: 23260
*** Device features:
eth0: 0x180
eth1: 0x180
he-ipv6: 0x2000
lo: 0x13865
sit0: 0x2000
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 02)
Subsystem: ABIT Computer Corp. Device [147b:1083]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port [8086:29c1] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: f8000000-fbffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI])
Subsystem: ABIT Computer Corp. Device [147b:1083]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at ff00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI])
Subsystem: ABIT Computer Corp. Device [147b:1083]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at fe00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02) (prog-if 00 [UHCI])
Subsystem: ABIT Computer Corp. Device [147b:1083]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at fd00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI])
Subsystem: ABIT Computer Corp. Device [147b:1083]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fdfff000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 02)
Subsystem: ABIT Computer Corp. Device [147b:1083]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fdff8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fdd00000-fddfffff
Prefetchable memory behind bridge: 00000000fda00000-00000000fdafffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fd900000-fd9fffff
Prefetchable memory behind bridge: 00000000fde00000-00000000fdefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI])
Subsystem: ABIT Computer Corp. Device [147b:1083]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at fc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI])
Subsystem: ABIT Computer Corp. Device [147b:1083]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at fb00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02) (prog-if 00 [UHCI])
Subsystem: ABIT Computer Corp. Device [147b:1083]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at fa00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI])
Subsystem: ABIT Computer Corp. Device [147b:1083]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fdffe000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fdc00000-fdcfffff
Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801IR (ICH9R) LPC Interface Controller [8086:2916] (rev 02)
Subsystem: ABIT Computer Corp. Device [147b:1083]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA IDE Controller [8086:2920] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ABIT Computer Corp. Device [147b:1083]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at f900 [size=8]
Region 1: I/O ports at f800 [size=4]
Region 2: I/O ports at f700 [size=8]
Region 3: I/O ports at f600 [size=4]
Region 4: I/O ports at f500 [size=16]
Region 5: I/O ports at f400 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02)
Subsystem: ABIT Computer Corp. Device [147b:1083]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 18
Region 0: Memory at fdffd000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 IDE interface [0101]: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller [8086:2926] (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: ABIT Computer Corp. Device [147b:1083]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at f200 [size=8]
Region 1: I/O ports at f100 [size=4]
Region 2: I/O ports at f000 [size=8]
Region 3: I/O ports at ef00 [size=4]
Region 4: I/O ports at ee00 [size=16]
Region 5: I/O ports at ed00 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
01:00.0 VGA compatible controller [0300]: nVidia Corporation G80 [GeForce 8800 Ultra] [10de:0194] (rev a2) (prog-if 00 [VGA controller])
Subsystem: nVidia Corporation Device [10de:0465]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at af00 [size=128]
[virtual] Expansion ROM at fb000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
03:00.0 SATA controller [0106]: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller [197b:2363] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: ABIT Computer Corp. Device [147b:1083]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 5: Memory at fd9fe000 (32-bit, non-prefetchable) [size=8K]
[virtual] Expansion ROM at fde00000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ahci
03:00.1 IDE interface [0101]: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller [197b:2363] (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: ABIT Computer Corp. Device [147b:1083]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at cf00 [size=8]
Region 1: I/O ports at ce00 [size=4]
Region 2: I/O ports at cd00 [size=8]
Region 3: I/O ports at cc00 [size=4]
Region 4: I/O ports at cb00 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_jmicron
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet [10ec:8167] (rev 10)
Subsystem: ABIT Computer Corp. Device [147b:1083]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at be00 [size=256]
Region 1: Memory at fdcff000 (32-bit, non-prefetchable) [size=256]
[virtual] Expansion ROM at fdb00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
04:01.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet [10ec:8167] (rev 10)
Subsystem: ABIT Computer Corp. Device [147b:1083]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at bc00 [size=256]
Region 1: Memory at fdcfe000 (32-bit, non-prefetchable) [size=256]
[virtual] Expansion ROM at fdb20000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
04:02.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] (prog-if 10 [OHCI])
Subsystem: ABIT Computer Corp. Device [147b:1083]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 68 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at fdcfd000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at fdcf8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
** USB devices:
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 03f0:5711 Hewlett-Packard PhotoSmart C4100 series
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-trunk-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-trunk-amd64 depends on:
ii debconf [debconf-2.0] 1.5.28 Debian configuration management sy
ii initramfs-tools [linux-initra 0.93.4 tools for generating an initramfs
ii module-init-tools 3.11-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-trunk-amd64 recommends:
ii firmware-linux-free 2.6.32-5 Binary firmware for various driver
Versions of packages linux-image-2.6.32-trunk-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-trunk-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
ii firmware-linux 0.22 Binary firmware for various driver
ii firmware-linux-nonfree 0.22 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
-- debconf information:
linux-image-2.6.32-trunk-amd64/postinst/bootloader-error-2.6.32-trunk-amd64:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-trunk-amd64/postinst/depmod-error-initrd-2.6.32-trunk-amd64: false
linux-image-2.6.32-trunk-amd64/prerm/removing-running-kernel-2.6.32-trunk-amd64: true
linux-image-2.6.32-trunk-amd64/postinst/bootloader-test-error-2.6.32-trunk-amd64:
* linux-image-2.6.32-trunk-amd64/postinst/missing-firmware-2.6.32-trunk-amd64:
linux-image-2.6.32-trunk-amd64/prerm/would-invalidate-boot-loader-2.6.32-trunk-amd64: true
Reply to: