Your message dated Sun, 10 Jan 2010 01:58:25 +0000 with message-id <1263088705.2480.211.camel@localhost> and subject line Re: Bug#561087: linux-image-2.6.32-rc8-amd64: rt61pci internet is slow with the 2.6.32-rc8 kernel has caused the Debian Bug report #561087, regarding linux-image-2.6.32-rc8-amd64: rt61pci internet is slow with the 2.6.32-rc8 kernel to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 561087: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=561087 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.32-rc8-amd64: rt61pci internet is slow with the 2.6.32-rc8 kernel
- From: Carl <erbrochendes@gmx.de>
- Date: Mon, 14 Dec 2009 11:58:52 +0100
- Message-id: <200912141158.52564.erbrochendes@gmx.de>
Package: linux-2.6 Version: 2.6.32~rc8-1~experimental.1 Severity: important Hi I am using debian testing with the debian sid kernel. When using the .32 kernel, the internet is getting slow. Some sites take over 5 minutes to load. Also i got 60% packet loss when pinging google.de With default testing kernel .30 everything works fine. With .32 kernel and USB wifi (rtl8187 chip) everything works fine I am using boot-option pci=use_crs Thanks Carl -- Package-specific info: ** Version: Linux version 2.6.32-rc8-amd64 (Debian 2.6.32~rc8-1~experimental.1) (waldi@debian.org) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sat Nov 21 22:12:25 UTC 2009 ** Command line: BOOT_IMAGE=/vmlinuz-2.6.32-rc8-amd64 root=/dev/mapper/eins-root ro quiet pci=use_crs ** Not tainted ** Kernel log: [ 3.730894] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.730920] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.731067] sda: sda1 sda2 sda3 [ 3.801149] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.807107] ide-cd driver 5.00 [ 3.810998] ide-cd: hda: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache [ 3.811005] Uniform CD-ROM driver Revision: 3.20 [ 4.072096] device-mapper: uevent: version 1.0.3 [ 4.072471] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 37.087920] Intel AES-NI instructions are not detected. [ 38.483963] PM: Starting manual resume from disk [ 38.529496] EXT4-fs (dm-1): INFO: recovery required on readonly filesystem [ 38.529503] EXT4-fs (dm-1): write access will be enabled during recovery [ 39.747550] EXT4-fs (dm-1): orphan cleanup on readonly fs [ 39.747561] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 8422 [ 39.747605] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 3142 [ 39.747619] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 7743 [ 39.747758] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 961 [ 39.747770] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 785 [ 39.747782] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 738 [ 39.747794] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 729 [ 39.747806] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 714 [ 39.747815] EXT4-fs (dm-1): 8 orphan inodes deleted [ 39.747819] EXT4-fs (dm-1): recovery complete [ 40.267658] EXT4-fs (dm-1): mounted filesystem with ordered data mode [ 41.654201] udev: starting version 146 [ 42.074558] ACPI: duty_cycle spans bit 4 [ 42.074609] processor LNXCPU:00: registered as cooling_device1 [ 42.074661] processor LNXCPU:01: registered as cooling_device2 [ 42.179749] ACPI: AC Adapter [ADP1] (on-line) [ 42.183540] ACPI: Battery Slot [BAT1] (battery absent) [ 42.315199] EDAC MC: Ver: 2.1.0 Nov 21 2009 [ 42.368047] EDAC amd64_edac: Ver: 3.2.0 Nov 21 2009 [ 42.368305] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). [ 42.368322] EDAC amd64: WARNING: ECC is disabled by BIOS. Module will NOT be loaded. [ 42.368324] Either Enable ECC in the BIOS, or set 'ecc_enable_override'. [ 42.368326] Also, use of the override can cause unknown side effects. [ 42.368349] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 42.419896] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 42.436921] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 42.438420] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 42.565703] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 42.631701] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000 [ 42.661469] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input7 [ 42.846689] cfg80211: Using static regulatory domain info [ 42.846694] cfg80211: Regulatory domain: US [ 42.846696] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 42.846700] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 42.846704] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 42.846707] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 42.846710] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 42.846713] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 42.846717] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 42.847385] cfg80211: Calling CRDA for country: US [ 42.848746] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 42.893300] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 43.148651] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input9 [ 43.167662] Error: Driver 'pcspkr' is already registered, aborting... [ 43.222954] rt61pci 0000:05:09.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 43.324767] phy0: Selected rate control algorithm 'minstrel' [ 43.325829] Registered led device: rt61pci-phy0::radio [ 43.326000] Registered led device: rt61pci-phy0::assoc [ 44.172941] loop: module loaded [ 51.020825] EXT4-fs (dm-3): mounted filesystem with ordered data mode [ 51.061906] Adding 999416k swap on /dev/mapper/eins-swap. Priority:-1 extents:1 across:999416k [ 62.807606] alloc irq_desc for 17 on node 0 [ 62.807611] alloc kstat_irqs on node 0 [ 62.807621] pci 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 62.917586] [drm] Initialized drm 1.1.0 20060810 [ 63.005715] [drm] radeon defaulting to userspace modesetting. [ 63.007688] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:05.0 on minor 0 [ 63.323192] [drm] Setting GART location based on new memory map [ 63.323744] [drm] Loading R300 Microcode [ 63.323749] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin [ 63.380219] [drm] Num pipes: 1 [ 63.380227] [drm] writeback test succeeded in 1 usecs [ 65.033194] r8169: eth0: link down [ 65.033677] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 65.045961] rt61pci 0000:05:09.0: firmware: requesting rt2561.bin [ 65.152536] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 89.583357] atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0). [ 89.583362] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known. [ 89.584619] atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0). [ 89.584623] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known. [ 265.234680] atkbd.c: Unknown key pressed (translated set 2, code 0xf6 on isa0060/serio0). [ 265.234686] atkbd.c: Use 'setkeycodes e076 <keycode>' to make it known. [ 265.235933] atkbd.c: Unknown key released (translated set 2, code 0xf6 on isa0060/serio0). [ 265.235937] atkbd.c: Use 'setkeycodes e076 <keycode>' to make it known. [ 266.220487] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 274.288109] wlan0: deauthenticating from 00:1c:2e:69:70:e9 by local choice (reason=3) [ 274.288424] wlan0: direct probe to AP 00:1c:2e:69:70:e9 (try 1) [ 274.293707] wlan0: direct probe responded [ 274.293713] wlan0: authenticate with AP 00:1c:2e:69:70:e9 (try 1) [ 274.300503] wlan0: authenticated [ 274.300531] wlan0: associate with AP 00:1c:2e:69:70:e9 (try 1) [ 274.314456] wlan0: RX AssocResp from 00:1c:2e:69:70:e9 (capab=0x21 status=0 aid=7) [ 274.314460] wlan0: associated [ 274.315305] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 274.315405] cfg80211: Calling CRDA for country: DK [ 284.456026] wlan0: no IPv6 routers present ** Model information sys_vendor: Notebook product_name: SAM2010 product_version: 1058 chassis_vendor: MICRO-STAR INT'L CO.,LTD. chassis_version: To Be Filled By O.E.M. bios_vendor: American Megatrends Inc. bios_version: A1058AM7 V7.23 board_vendor: MEDION board_name: SAM2010 board_version: ** Loaded modules: Module Size Used by radeon 448677 2 ttm 31324 1 radeon drm_kms_helper 18899 1 radeon drm 136911 5 radeon,ttm,drm_kms_helper i2c_algo_bit 4225 1 radeon ext2 52969 1 loop 11767 0 firewire_sbp2 11466 0 arc4 1274 2 ecb 1841 2 rt61pci 17604 0 rt2x00pci 4605 1 rt61pci rt2x00lib 21746 2 rt61pci,rt2x00pci snd_hda_codec_realtek 235095 1 mac80211 135311 2 rt2x00pci,rt2x00lib snd_hda_intel 17851 2 snd_pcsp 6579 1 cfg80211 101333 2 rt2x00lib,mac80211 snd_hda_codec 52900 2 snd_hda_codec_realtek,snd_hda_intel joydev 8411 0 rfkill 13012 1 cfg80211 snd_hwdep 5364 1 snd_hda_codec snd_pcm_oss 32399 0 shpchp 25928 0 eeprom_93cx6 1335 1 rt61pci snd_mixer_oss 12606 1 snd_pcm_oss snd_pcm 60615 4 snd_hda_intel,snd_pcsp,snd_hda_codec,snd_pcm_oss k8temp 3139 0 pci_hotplug 21171 1 shpchp i2c_piix4 8152 0 i2c_core 15472 4 radeon,drm,i2c_algo_bit,i2c_piix4 amd64_edac_mod 14075 0 snd_timer 15502 1 snd_pcm edac_core 29245 1 amd64_edac_mod snd 44718 15 snd_hda_codec_realtek,snd_hda_intel,snd_pcsp,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer soundcore 4614 1 snd battery 4998 0 ac 2192 0 evdev 7336 19 serio_raw 3752 0 snd_page_alloc 6217 2 snd_hda_intel,snd_pcm processor 29495 0 psmouse 35261 0 ext4 283828 2 mbcache 4970 2 ext2,ext4 jbd2 66695 1 ext4 crc16 1319 1 ext4 sha256_generic 8692 0 cryptd 5366 0 aes_x86_64 7340 2 aes_generic 25714 1 aes_x86_64 cbc 2539 1 dm_crypt 10179 1 dm_mod 53562 12 dm_crypt ide_cd_mod 24744 0 cdrom 29399 1 ide_cd_mod sd_mod 29705 3 crc_t10dif 1276 1 sd_mod ide_pci_generic 2788 0 ata_generic 2983 0 sdhci_pci 5565 0 sdhci 13966 1 sdhci_pci firewire_ohci 19228 0 sata_sil 7412 2 ohci_hcd 19196 0 libata 131671 2 ata_generic,sata_sil atiixp 2476 0 firewire_core 36560 2 firewire_sbp2,firewire_ohci crc_itu_t 1307 2 rt61pci,firewire_core mmc_core 45376 1 sdhci led_class 2401 2 rt2x00lib,sdhci video 17445 0 output 1692 1 video scsi_mod 122054 3 firewire_sbp2,sd_mod,libata ide_core 76818 3 ide_cd_mod,ide_pci_generic,atiixp ehci_hcd 30338 0 r8169 28697 0 mii 3210 1 r8169 button 4618 0 thermal 11674 0 fan 3346 0 thermal_sys 11878 4 processor,video,thermal,fan ** Network interface configuration: auto lo iface lo inet loopback ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000 link/ether 00:19:db:ee:3d:c5 brd ff:ff:ff:ff:ff:ff 3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:19:db:9c:07:a0 brd ff:ff:ff:ff:ff:ff inet 10.73.42.50/16 brd 10.73.255.255 scope global wlan0 inet6 fe80::219:dbff:fe9c:7a0/64 scope link valid_lft forever preferred_lft forever *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 8738 138 0 0 0 0 0 0 8738 138 0 0 0 0 0 0 eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 wlan0: 1133000 8264 0 0 0 0 0 0 89286 629 0 0 0 0 0 0 *** Protocol statistics: Ip: 2170 total packets received 4 with invalid addresses 0 forwarded 0 incoming packets discarded 1434 incoming packets delivered 690 requests sent out 16 outgoing packets dropped Icmp: 27 ICMP messages received 0 input ICMP message failed. ICMP input histogram: destination unreachable: 27 27 ICMP messages sent 0 ICMP messages failed ICMP output histogram: destination unreachable: 27 IcmpMsg: InType3: 27 OutType3: 27 Tcp: 85 active connections openings 1 passive connection openings 49 failed connection attempts 0 connection resets received 2 connections established 390 segments received 437 segments send out 88 segments retransmited 0 bad segments received. 44 resets sent Udp: 88 packets received 27 packets to unknown port received. 0 packet receive errors 180 packets sent UdpLite: TcpExt: 17 TCP sockets finished time wait in fast timer 9 delayed acks sent Quick ack mode was activated 10 times 101 packet headers predicted 46 acknowledgments not containing data payload received 10 predicted acknowledgments 23 congestion windows recovered without slow start after partial ack 1 timeouts after SACK recovery 54 other TCP timeouts 10 DSACKs sent for old packets 18 DSACKs received 1 connections reset due to unexpected data 13 connections aborted due to timeout TCPDSACKIgnoredOld: 7 TCPDSACKIgnoredNoUndo: 3 IpExt: InBcastPkts: 943 InOctets: 478874 OutOctets: 72604 InBcastOctets: 109883 *** Device features: eth0: 0x180 lo: 0x13865 wlan0: 0x2000 ** PCI devices: 00:00.0 Host bridge [0600]: ATI Technologies Inc RS480 Host Bridge [1002:5950] (rev 10) Subsystem: ATI Technologies Inc RS480 Host Bridge [1002:5950] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 00:01.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a3f] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 00006000-00006fff Memory behind bridge: ff200000-ff2fffff Prefetchable memory behind bridge: 00000000cdf00000-00000000ddefffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:06.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a38] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=03, sec-latency=0 I/O behind bridge: 00007000-00007fff Memory behind bridge: ff300000-ffafffff Prefetchable memory behind bridge: 00000000ddf00000-00000000dfefffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:07.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a39] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00008000-00008fff Memory behind bridge: ffb00000-ffbfffff Prefetchable memory behind bridge: 0000000080000000-00000000801fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:12.0 IDE interface [0101]: ATI Technologies Inc IXP SB400 Serial ATA Controller [1002:4379] (rev 80) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: ATI Technologies Inc IXP SB400 Serial ATA Controller [1002:4379] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 22 Region 0: I/O ports at b800 [size=8] Region 1: I/O ports at b400 [size=4] Region 2: I/O ports at b000 [size=8] Region 3: I/O ports at ac00 [size=4] Region 4: I/O ports at a800 [size=16] Region 5: Memory at ffeffc00 (32-bit, non-prefetchable) [size=512] Expansion ROM at ffe00000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: sata_sil 00:13.0 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB Host Controller [1002:4374] (rev 80) (prog-if 10 [OHCI]) Subsystem: ATI Technologies Inc IXP SB400 USB Host Controller [1002:4374] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at ffefe000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.1 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB Host Controller [1002:4375] (rev 80) (prog-if 10 [OHCI]) Subsystem: ATI Technologies Inc IXP SB400 USB Host Controller [1002:4375] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at ffefd000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.2 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB2 Host Controller [1002:4373] (rev 80) (prog-if 20 [EHCI]) Subsystem: ATI Technologies Inc IXP SB400 USB2 Host Controller [1002:4373] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at ffefc000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:14.0 SMBus [0c05]: ATI Technologies Inc IXP SB400 SMBus Controller [1002:4372] (rev 83) Subsystem: Micro-Star International Co., Ltd. Device [1462:a422] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: I/O ports at 0b00 [size=16] Region 1: Memory at 000a0000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: piix4_smbus 00:14.1 IDE interface [0101]: ATI Technologies Inc IXP SB400 IDE Controller [1002:4376] (rev 80) (prog-if 8a [Master SecP PriP]) Subsystem: ATI Technologies Inc IXP SB400 IDE Controller [1002:4376] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at ff00 [size=16] Capabilities: <access denied> Kernel driver in use: ATIIXP_IDE 00:14.2 Audio device [0403]: ATI Technologies Inc IXP SB4x0 High Definition Audio Controller [1002:437b] (rev 01) Subsystem: Micro-Star International Co., Ltd. Device [1462:a422] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin ? routed to IRQ 16 Region 0: Memory at ffef8000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 00:14.3 ISA bridge [0601]: ATI Technologies Inc IXP SB400 PCI-ISA Bridge [1002:4377] (rev 80) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:14.4 PCI bridge [0604]: ATI Technologies Inc IXP SB400 PCI-PCI Bridge [1002:4371] (rev 80) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=05, subordinate=05, sec-latency=64 Memory behind bridge: 80200000-802fffff Secondary status: 66MHz- FastB2B+ ParErr+ DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+ BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> Kernel driver in use: k8temp 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS482 [Radeon Xpress 200M] [1002:5975] (prog-if 00 [VGA controller]) Subsystem: Micro-Star International Co., Ltd. Device [1462:a422] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (2000ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at 6800 [size=256] Region 2: Memory at ff2f0000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at ff2c0000 [disabled] [size=128K] Capabilities: <access denied> 04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01) Subsystem: Micro-Star International Co., Ltd. Device [1462:a422] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at 8800 [size=256] Region 2: Memory at ffbff000 (64-bit, non-prefetchable) [size=4K] Expansion ROM at ffbc0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: r8169 05:04.0 FireWire (IEEE 1394) [0c00]: O2 Micro, Inc. Firewire (IEEE 1394) [1217:00f7] (rev 02) (prog-if 10 [OHCI]) Subsystem: O2 Micro, Inc. Firewire (IEEE 1394) [1217:00f7] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at 80208000 (32-bit, non-prefetchable) [size=4K] Region 1: Memory at 8020a000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: firewire_ohci 05:04.2 SD Host controller [0805]: O2 Micro, Inc. Integrated MMC/SD Controller [1217:7120] (rev 01) Subsystem: Micro-Star International Co., Ltd. Device [1462:0581] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 20 Region 0: Memory at 8020a800 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: sdhci-pci 05:04.3 Mass storage controller [0180]: O2 Micro, Inc. Integrated MS/xD Controller [1217:7130] (rev 01) Subsystem: Micro-Star International Co., Ltd. Device [1462:0581] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 7 Region 0: Memory at 80209000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> 05:09.0 Network controller [0280]: RaLink RT2561/RT61 rev B 802.11g [1814:0302] Subsystem: Micro-Star International Co., Ltd. Device [1462:b833] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 22 Region 0: Memory at 80200000 (32-bit, non-prefetchable) [size=32K] Capabilities: <access denied> Kernel driver in use: rt61pci ** USB devices: Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-rc8-amd64 (SMP w/2 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.32-rc8-amd64 depends on: ii debconf [debconf-2.0] 1.5.28 Debian configuration management sy ii initramfs-tools [linux-initra 0.93.4 tools for generating an initramfs ii module-init-tools 3.11-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-rc8-amd64 recommends: ii firmware-linux-free 2.6.32-1 Binary firmware for various driver Versions of packages linux-image-2.6.32-rc8-amd64 suggests: pn grub | lilo <none> (no description available) pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-rc8-amd64 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) ii firmware-linux-nonfree 0.21 Binary firmware for various driver pn firmware-qlogic <none> (no description available) ii firmware-ralink 0.18 Binary firmware for Ralink RT2561, -- debconf information: linux-image-2.6.32-rc8-amd64/prerm/removing-running-kernel-2.6.32-rc8-amd64: true linux-image-2.6.32-rc8-amd64/prerm/would-invalidate-boot-loader-2.6.32-rc8- amd64: true shared/kernel-image/really-run-bootloader: true linux-image-2.6.32-rc8-amd64/postinst/depmod-error-initrd-2.6.32-rc8-amd64: false linux-image-2.6.32-rc8-amd64/postinst/bootloader-test-error-2.6.32-rc8- amd64: * linux-image-2.6.32-rc8-amd64/postinst/missing-firmware-2.6.32-rc8-amd64: linux-image-2.6.32-rc8-amd64/postinst/bootloader-error-2.6.32-rc8-amd64:
--- End Message ---
--- Begin Message ---
- To: 561087-done@bugs.debian.org
- Subject: Re: Bug#561087: linux-image-2.6.32-rc8-amd64: rt61pci internet is slow with the 2.6.32-rc8 kernel
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Sun, 10 Jan 2010 01:58:25 +0000
- Message-id: <1263088705.2480.211.camel@localhost>
- In-reply-to: <[🔎] 201001100214.40549.erbrochendes@gmx.de>
- References: <200912141158.52564.erbrochendes@gmx.de> <200912151106.38069.erbrochendes@gmx.de> <[🔎] 1263085685.2480.166.camel@localhost> <[🔎] 201001100214.40549.erbrochendes@gmx.de>
Version: 2.6.32-4 On Sun, 2010-01-10 at 02:14 +0100, Carl wrote: > Am Sonntag 10 Januar 2010 02:08:05 schrieb Ben Hutchings: > > On Tue, 2009-12-15 at 11:06 +0100, Carl wrote: > > [...] > > > > > What can i do to isolate this bug? > > > > > > I will try to find an other wifi, and see if it's working better else > > > were. Also i can try to compile the .32 from the kernel.org source and > > > check if that works better. > > > > > > Anything else i could try? > > > > Kernel version 2.6.32 enabled some kind of automatic power-saving for > > some wireless interfaces, but it didn't work properly in the rt61 > > hardware. This may explain the poor performance you are seeing. The > > latest packaged version, 2.6.32-4, disables power-saving. Please test > > whether this fixes the problem. > > > > Ben. > > > > Testet. > looks like it works. > > Thanks Good. You're welcome. Ben. -- Ben Hutchings Theory and practice are closer in theory than in practice. - John Levine, moderator of comp.compilersAttachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---