--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.30-2-amd64 doesn't start software raid on boot
- From: Troy Telford <ttelford.groups@gmail.com>
- Date: Fri, 16 Oct 2009 15:24:15 -0600
- Message-id: <20091016212415.4762.81323.reportbug@pilot.moya>
Package: linux-image-2.6.30-2-amd64
Version: 2.6.30-8
Severity: normal
This does not happen on 2.6.30-1-amd64, so I simply use the older kernel for now; when the older kernel boots, I do see the software raid being detected and configured.
My system uses software RAID on all of its drives, including the boot device.
linux-image-2.6.30-2-amd64 refuses to boot for me; it cannot find the root filesystem, and it appears the reason is because it can't find any of the software raids. The uuid's for the software raid devices are not present, nor are the normal /dev/md? entries. /proc/mdstat doesn't exist either.
I've taken a full log of the boot (via serial console), and dumped it to a file, which I'll include as an attachment.
-- Package-specific info:
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.30-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.30-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.27 Debian configuration management sy
ii initramfs-tools [linux-initra 0.93.4 tools for generating an initramfs
ii module-init-tools 3.10-3 tools for managing Linux kernel mo
linux-image-2.6.30-2-amd64 recommends no packages.
Versions of packages linux-image-2.6.30-2-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.30 <none> (no description available)
-- debconf information:
linux-image-2.6.30-2-amd64/preinst/bootloader-initrd-2.6.30-2-amd64: true
linux-image-2.6.30-2-amd64/preinst/initrd-2.6.30-2-amd64:
linux-image-2.6.30-2-amd64/preinst/lilo-has-ramdisk:
linux-image-2.6.30-2-amd64/postinst/kimage-is-a-directory:
linux-image-2.6.30-2-amd64/preinst/abort-install-2.6.30-2-amd64:
linux-image-2.6.30-2-amd64/postinst/depmod-error-initrd-2.6.30-2-amd64: false
linux-image-2.6.30-2-amd64/preinst/overwriting-modules-2.6.30-2-amd64: true
linux-image-2.6.30-2-amd64/postinst/old-dir-initrd-link-2.6.30-2-amd64: true
linux-image-2.6.30-2-amd64/postinst/old-system-map-link-2.6.30-2-amd64: true
linux-image-2.6.30-2-amd64/preinst/elilo-initrd-2.6.30-2-amd64: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.30-2-amd64/preinst/failed-to-move-modules-2.6.30-2-amd64:
linux-image-2.6.30-2-amd64/prerm/would-invalidate-boot-loader-2.6.30-2-amd64: true
linux-image-2.6.30-2-amd64/postinst/old-initrd-link-2.6.30-2-amd64: true
linux-image-2.6.30-2-amd64/postinst/bootloader-error-2.6.30-2-amd64:
linux-image-2.6.30-2-amd64/prerm/removing-running-kernel-2.6.30-2-amd64: true
linux-image-2.6.30-2-amd64/postinst/depmod-error-2.6.30-2-amd64: false
linux-image-2.6.30-2-amd64/preinst/lilo-initrd-2.6.30-2-amd64: true
linux-image-2.6.30-2-amd64/preinst/abort-overwrite-2.6.30-2-amd64:
linux-image-2.6.30-2-amd64/postinst/create-kimage-link-2.6.30-2-amd64: true
linux-image-2.6.30-2-amd64/postinst/bootloader-test-error-2.6.30-2-amd64:
[Linux-bzImage, setup=0x3000, size=0x21bba0]
[Initrd, addr=0x37873000, size=0x77c9c5]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.30-2-amd64 (Debian 2.6.30-8) (waldi@debian.org) (gcc version 4.3.4 (Debian 4.3.4-3) ) #1 SMP Fri Sep 25 22:16:56 UTC 2009
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.30-2-amd64 root=UUID=e5c87f98-51b3-4073-a043-3fdc532dc611 ro console=ttyS0,115200
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ac00 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
[ 0.000000] BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x7fee0 max_arch_pfn = 0x100000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] init_memory_mapping: 0000000000000000-000000007fee0000
[ 0.000000] RAMDISK: 37873000 - 37fef9c5
[ 0.000000] ACPI: RSDP 00000000000f6b40 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 000000007fee3040 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 000000007fee30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 000000007fee3180 04B25 (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 000000007fee0000 00040
[ 0.000000] ACPI: HPET 000000007fee7e00 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 000000007fee7e80 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: APIC 000000007fee7d00 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: SSDT 000000007fee7f00 0019E (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[ 0.000000] ACPI: SSDT 000000007fee8390 00275 (v01 PmRef CpuPm 00003000 INTL 20040311)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007fee0000
[ 0.000000] Bootmem setup node 0 0000000000000000-000000007fee0000
[ 0.000000] NODE_DATA [000000000000a000 - 0000000000011fff]
[ 0.000000] bootmap [0000000000012000 - 0000000000021fdf] pages 10
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 007fee0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 00007ddb0c] TEXT DATA BSS ==> [0000200000 - 00007ddb0c]
[ 0.000000] #3 [0037873000 - 0037fef9c5] RAMDISK ==> [0037873000 - 0037fef9c5]
[ 0.000000] #4 [000009ac00 - 0000100000] BIOS reserved ==> [000009ac00 - 0000100000]
[ 0.000000] #5 [00007de000 - 00007de0f6] BRK ==> [00007de000 - 00007de0f6]
[ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
[ 0.000000] found SMP MP-table at [ffff8800000f5180] f5180
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009a
[ 0.000000] 0: 0x00000100 -> 0x0007fee0
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009a000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7ff00000:70100000)
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages at ffff880001010000, static data 76256 bytes
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515126
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.30-2-amd64 root=UUID=e5c87f98-51b3-4073-a043-3fdc532dc611 ro console=ttyS0,115200
[ 0.000000] Initializing CPU#0
[ 0.000000] Experimental hierarchical RCU implementation.
[ 0.000000] Experimental hierarchical RCU init done.
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1999.994 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [ttyS0] enabled
[ 0.004000] Checking aperture...
[ 0.004000] No AGP bridge found
[ 0.004000] Memory: 2052636k/2096000k available (2784k kernel code, 408k absent, 42956k reserved, 1411k data, 560k init)
[ 0.004000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.004011] Calibrating delay loop (skipped), value calculated using timer frequency.. 3999.98 BogoMIPS (lpj=7999976)
[ 0.012085] Security Framework initialized
[ 0.016005] SELinux: Disabled at boot.
[ 0.020240] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.024892] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.028508] Mount-cache hash table entries: 256
[ 0.032172] Initializing cgroup subsys ns
[ 0.036007] Initializing cgroup subsys cpuacct
[ 0.040007] Initializing cgroup subsys devices
[ 0.044004] Initializing cgroup subsys freezer
[ 0.048003] Initializing cgroup subsys net_cls
[ 0.052029] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.056003] CPU: L2 cache: 1024K
[ 0.060004] CPU 0/0x0 -> Node 0
[ 0.063143] CPU: Physical Processor ID: 0
[ 0.064003] CPU: Processor Core ID: 0
[ 0.068010] CPU0: Thermal monitoring enabled (TM2)
[ 0.072004] using mwait in idle threads.
[ 0.076980] ACPI: Core revision 20090320
[ 0.088070] Setting APIC routing to flat
[ 0.092311] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.138362] CPU0: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz stepping 0d
[ 0.148001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 3999.97 BogoMIPS (lpj=7999946)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 1024K
[ 0.004000] CPU 1/0x1 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] CPU1: Thermal monitoring enabled (TM2)
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.237142] CPU1: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz stepping 0d
[ 0.245257] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.248026] Brought up 2 CPUs
[ 0.250998] Total of 2 processors activated (7999.96 BogoMIPS).
[ 0.252140] net_namespace: 1936 bytes
[ 0.256030] Booting paravirtualized kernel on bare hardware
[ 0.260136] regulator: core version 0.5
[ 0.264067] NET: Registered protocol family 16
[ 0.268026] ACPI: bus type pci registered
[ 0.276032] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.280003] PCI: MCFG area at f0000000 reserved in E820
[ 0.285297] PCI: Using MMCONFIG at f0000000 - f3ffffff
[ 0.288003] PCI: Using configuration type 1 for base access
[ 0.292067] bio: create slab <bio-0> at 0
[ 0.304304] ACPI: Interpreter enabled
[ 0.307973] ACPI: (supports S0 S3 S4 S5)
[ 0.312006] ACPI: Using IOAPIC for interrupt routing
[ 0.321266] ACPI: No dock devices found.
[ 0.324017] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.328079] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.332004] pci 0000:00:01.0: PME# disabled
[ 0.336382] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.340004] pci 0000:00:1b.0: PME# disabled
[ 0.344056] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.348005] pci 0000:00:1c.0: PME# disabled
[ 0.352060] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.356004] pci 0000:00:1c.3: PME# disabled
[ 0.360058] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.364005] pci 0000:00:1c.4: PME# disabled
[ 0.368402] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 0.372004] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.376004] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[ 0.380005] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[ 0.384122] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.388004] pci 0000:00:1f.2: PME# disabled
[ 0.396400] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.400006] pci 0000:04:00.0: PME# disabled
[ 0.404331] pci 0000:05:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.408005] pci 0000:05:02.0: PME# disabled
[ 0.412045] pci 0000:00:1e.0: transparent bridge
[ 0.437028] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.446270] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.454771] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
[ 0.462459] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
[ 0.470080] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.477611] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.485245] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.492692] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 0.500353] usbcore: registered new interface driver usbfs
[ 0.504020] usbcore: registered new interface driver hub
[ 0.508020] usbcore: registered new device driver usb
[ 0.512019] PCI: Using ACPI for IRQ routing
[ 0.528050] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.533225] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.556031] pnp: PnP ACPI init
[ 0.559101] ACPI: bus type pnp registered
[ 0.566429] pnp: PnP ACPI: found 13 devices
[ 0.570614] ACPI: ACPI bus type pnp unregistered
[ 0.575241] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.581594] system 00:01: ioport range 0x290-0x29f has been reserved
[ 0.587946] system 00:01: ioport range 0x800-0x87f has been reserved
[ 0.594299] system 00:01: ioport range 0x290-0x294 has been reserved
[ 0.600651] system 00:01: ioport range 0x880-0x88f has been reserved
[ 0.607009] system 00:09: ioport range 0x400-0x4bf could not be reserved
[ 0.613708] system 00:0a: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.620839] system 00:0b: iomem range 0xf0000-0xf3fff could not be reserved
[ 0.627794] system 00:0b: iomem range 0xf4000-0xf7fff could not be reserved
[ 0.634755] system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.641714] system 00:0b: iomem range 0xfc000-0xfffff could not be reserved
[ 0.648674] system 00:0b: iomem range 0x7fee0000-0x7fefffff could not be reserved
[ 0.656152] system 00:0b: iomem range 0x0-0x9ffff could not be reserved
[ 0.662765] system 00:0b: iomem range 0x100000-0x7fedffff could not be reserved
[ 0.670071] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.677551] system 00:0b: iomem range 0xfed10000-0xfed1dfff has been reserved
[ 0.684684] system 00:0b: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.691816] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.698949] system 00:0b: iomem range 0xffb00000-0xffb7ffff has been reserved
[ 0.706083] system 00:0b: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.713213] system 00:0b: iomem range 0xe0000-0xeffff has been reserved
[ 0.724773] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.730694] pci 0000:00:01.0: IO window: disabled
[ 0.735574] pci 0000:00:01.0: MEM window: 0xf4000000-0xf6ffffff
[ 0.741666] pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff
[ 0.749236] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.755151] pci 0000:00:1c.0: IO window: 0xa000-0xafff
[ 0.760465] pci 0000:00:1c.0: MEM window: disabled
[ 0.765433] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.770833] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03
[ 0.776749] pci 0000:00:1c.3: IO window: 0xb000-0xbfff
[ 0.782063] pci 0000:00:1c.3: MEM window: 0xf7000000-0xf7ffffff
[ 0.788155] pci 0000:00:1c.3: PREFETCH window: disabled
[ 0.793558] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:04
[ 0.799928] pci 0000:00:1c.4: IO window: 0xc000-0xcfff
[ 0.805248] pci 0000:00:1c.4: MEM window: 0xf8000000-0xf9ffffff
[ 0.811339] pci 0000:00:1c.4: PREFETCH window: 0x00000080000000-0x000000800fffff
[ 0.818914] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.824833] pci 0000:00:1e.0: IO window: 0xd000-0xdfff
[ 0.830146] pci 0000:00:1e.0: MEM window: 0xfa000000-0xfbffffff
[ 0.836239] pci 0000:00:1e.0: PREFETCH window: 0x00000080100000-0x000000801fffff
[ 0.843824] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.850532] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.857244] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.863955] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.870778] NET: Registered protocol family 2
[ 0.908215] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.916180] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.925630] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.932813] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.939431] TCP reno registered
[ 0.952195] NET: Registered protocol family 1
[ 0.956616] Trying to unpack rootfs image as initramfs...
[ 1.151689] Freeing initrd memory: 7666k freed
[ 1.160744] audit: initializing netlink socket (disabled)
[ 1.166178] type=2000 audit(1255726739.166:1): initialized
[ 1.172106] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.178610] VFS: Disk quotas dquot_6.5.2
[ 1.182567] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.189069] msgmni has been set to 4024
[ 1.193063] alg: No test for stdrng (krng)
[ 1.197231] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.204626] io scheduler noop registered
[ 1.208550] io scheduler anticipatory registered
[ 1.213168] io scheduler deadline registered
[ 1.217459] io scheduler cfq registered (default)
[ 1.226391] Linux agpgart interface v0.103
[ 1.230504] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.236892] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.243435] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.250572] brd: module loaded
[ 1.253711] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.261710] PNP: No PS/2 controller found. Probing ports directly.
[ 1.268252] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.273225] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.278414] mice: PS/2 mouse device common for all mice
[ 1.283695] rtc_cmos 00:04: RTC can wake from S4
[ 1.288367] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.294486] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.300876] cpuidle: using governor ladder
[ 1.304975] cpuidle: using governor menu
[ 1.308904] No iBFT detected.
[ 1.312185] TCP cubic registered
[ 1.315472] NET: Registered protocol family 10
[ 1.320354] lo: Disabled Privacy Extensions
[ 1.324796] Mobile IPv6
[ 1.327247] NET: Registered protocol family 17
[ 1.331861] registered taskstats version 1
[ 1.336133] rtc_cmos 00:04: setting system clock to 2009-10-16 20:59:00 UTC (1255726740)
[ 1.344267] Freeing unused kernel memory: 560k freed
[ 1.349423] Write protecting the kernel read-only data: 3808k
Loading, please wait...
Couldnt get a file descriptor referring to the console
KDGKBMODE: Bad file descriptor
loadkeys: error reading keyboard mode
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... [ 1.489397] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.515301] SCSI subsystem initialized
[ 1.535766] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.543223] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.548663] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.560096] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc005000
[ 1.590550] 3c59x 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.597479] 3c59x: Donald Becker and others.
[ 1.601839] 0000:05:02.0: 3Com PCI 3c905C Tornado at ffffc2000037c000.
[ 1.630469] pata_jmicron 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.631259] udev: renamed network interface eth0 to eth1
[ 1.643424] sata_sil 0000:05:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.650762] sata_sil 0000:05:01.0: Applying R_ERR on DMA activate FIS errata fix
[ 1.658423] scsi0 : pata_jmicron
[ 1.661863] scsi1 : sata_sil
[ 1.664886] scsi2 : pata_jmicron
[ 1.668932] ata1: PATA max UDMA/100 cmd 0xb000 ctl 0xb100 bmdma 0xb400 irq 19
[ 1.676305] ata2: PATA max UDMA/100 cmd 0xb200 ctl 0xb300 bmdma 0xb408 irq 19
[ 1.686461] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.692232] r8169 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.700031] eth0: RTL8168b/8111b at 0xffffc20004a42000, 00:1d:7d:e9:0b:70, XID 38000000 IRQ 28
[ 1.710060] scsi3 : sata_sil
[ 1.713083] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.719044] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.726012] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.733423] usb usb1: Product: EHCI Host Controller
[ 1.738432] usb usb1: Manufacturer: Linux 2.6.30-2-amd64 ehci_hcd
[ 1.744706] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.749515] usb usb1: configuration #1 chosen from 1 choice
[ 1.755294] hub 1-0:1.0: USB hub found
[ 1.759142] hub 1-0:1.0: 6 ports detected
[ 1.763435] scsi4 : sata_sil
[ 1.766493] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.773553] ahci: SSS flag set, parallel bus scan disabled
[ 1.779244] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 1.787669] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems
[ 1.799519] scsi5 : sata_sil
[ 1.802556] ata3: SATA max UDMA/100 mmio m1024@0xfb021000 tf 0xfb021080 irq 19
[ 1.809969] ata4: SATA max UDMA/100 mmio m1024@0xfb021000 tf 0xfb0210c0 irq 19
[ 1.817410] ata5: SATA max UDMA/100 mmio m1024@0xfb021000 tf 0xfb021280 irq 19
[ 1.824813] ata6: SATA max UDMA/100 mmio m1024@0xfb021000 tf 0xfb0212c0 irq 19
[ 1.832276] scsi6 : ahci
[ 1.834962] sata_promise 0000:05:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.842762] scsi7 : ahci
[ 1.845429] scsi8 : sata_promise
[ 1.848828] scsi9 : ahci
[ 1.851483] scsi10 : sata_promise
[ 1.854962] scsi11 : ahci
[ 1.857722] scsi12 : sata_promise
[ 1.861189] scsi13 : ahci
[ 1.863950] scsi14 : sata_promise
[ 1.867387] ata13: SATA max UDMA/133 mmio m4096@0xfb020000 ata 0xfb020380 irq 20
[ 1.874986] ata14: SATA max UDMA/133 mmio m4096@0xfb020000 ata 0xfb020280 irq 20
[ 1.882602] ata15: SATA max UDMA/133 mmio m4096@0xfb020000 ata 0xfb020200 irq 20
[ 1.890195] ata16: SATA max UDMA/133 mmio m4096@0xfb020000 ata 0xfb020300 irq 20
[ 1.897839] scsi15 : ahci
[ 1.900694] ata7: SATA max UDMA/133 abar m2048@0xfc006000 port 0xfc006100 irq 29
[ 1.908301] ata8: SATA max UDMA/133 abar m2048@0xfc006000 port 0xfc006180 irq 29
[ 1.915888] ata9: DUMMY
[ 1.918413] ata10: DUMMY
[ 1.921030] ata11: SATA max UDMA/133 abar m2048@0xfc006000 port 0xfc006300 irq 29
[ 1.928735] ata12: SATA max UDMA/133 abar m2048@0xfc006000 port 0xfc006380 irq 29
[ 1.936697] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.943860] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.949322] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.960848] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc004000
[ 1.980053] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.986010] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.992992] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.000436] usb usb2: Product: EHCI Host Controller
[ 2.005433] usb usb2: Manufacturer: Linux 2.6.30-2-amd64 ehci_hcd
[ 2.011717] usb usb2: SerialNumber: 0000:00:1d.7
[ 2.016523] usb usb2: configuration #1 chosen from 1 choice
[ 2.022283] hub 2-0:1.0: USB hub found
[ 2.026156] hub 2-0:1.0: 6 ports detected
[ 2.039131] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.045930] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.053291] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.058698] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 2.066286] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000
[ 2.072171] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.079096] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.086434] usb usb3: Product: UHCI Host Controller
[ 2.091416] usb usb3: Manufacturer: Linux 2.6.30-2-amd64 uhci_hcd
[ 2.097614] usb usb3: SerialNumber: 0000:00:1a.0
[ 2.102382] usb usb3: configuration #1 chosen from 1 choice
[ 2.108097] hub 3-0:1.0: USB hub found
[ 2.111960] hub 3-0:1.0: 2 ports detected
[ 2.118069] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.125274] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.130724] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 2.138305] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e100
[ 2.144204] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.151185] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.152546] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2.164808] usb usb4: Product: UHCI Host Controller
[ 2.169833] usb usb4: Manufacturer: Linux 2.6.30-2-amd64 uhci_hcd
[ 2.176108] usb usb4: SerialNumber: 0000:00:1a.1
[ 2.180936] usb usb4: configuration #1 chosen from 1 choice
[ 2.186709] hub 4-0:1.0: USB hub found
[ 2.190561] hub 4-0:1.0: 2 ports detected
[ 2.194314] ata3.00: ATA-8: WDC WD5001ABYS-42YNA0, 59.01D01, max UDMA/133
[ 2.194316] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.208904] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.216086] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 2.221459] ata3.00: configured for UDMA/100
[ 2.221506] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 2.221540] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e500
[ 2.221581] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.221583] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.221586] usb usb5: Product: UHCI Host Controller
[ 2.221587] usb usb5: Manufacturer: Linux 2.6.30-2-amd64 uhci_hcd
[ 2.221589] usb usb5: SerialNumber: 0000:00:1a.2
[ 2.221635] usb usb5: configuration #1 chosen from 1 choice
[ 2.221664] hub 5-0:1.0: USB hub found
[ 2.221670] hub 5-0:1.0: 2 ports detected
[ 2.221821] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.221832] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.221889] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 2.221918] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e200
[ 2.221957] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.221960] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.221962] usb usb6: Product: UHCI Host Controller
[ 2.221964] usb usb6: Manufacturer: Linux 2.6.30-2-amd64 uhci_hcd
[ 2.221965] usb usb6: SerialNumber: 0000:00:1d.0
[ 2.222006] usb usb6: configuration #1 chosen from 1 choice
[ 2.222033] hub 6-0:1.0: USB hub found
[ 2.222040] hub 6-0:1.0: 2 ports detected
[ 2.222162] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.222173] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.222220] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 2.222250] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e300
[ 2.222289] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.222291] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.222293] usb usb7: Product: UHCI Host Controller
[ 2.222295] usb usb7: Manufacturer: Linux 2.6.30-2-amd64 uhci_hcd
[ 2.222296] usb usb7: SerialNumber: 0000:00:1d.1
[ 2.222338] usb usb7: configuration #1 chosen from 1 choice
[ 2.222364] hub 7-0:1.0: USB hub found
[ 2.222370] hub 7-0:1.0: 2 ports detected
[ 2.222492] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.222502] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.222553] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 2.222582] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e400
[ 2.222619] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.222621] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.222623] usb usb8: Product: UHCI Host Controller
[ 2.222625] usb usb8: Manufacturer: Linux 2.6.30-2-amd64 uhci_hcd
[ 2.222626] usb usb8: SerialNumber: 0000:00:1d.2
[ 2.222669] usb usb8: configuration #1 chosen from 1 choice
[ 2.222695] hub 8-0:1.0: USB hub found
[ 2.222701] hub 8-0:1.0: 2 ports detected
[ 2.493417] ata13: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.500328] scsi 1:0:0:0: Direct-Access ATA WDC WD5001ABYS-4 59.0 PQ: 0 ANSI: 5
[ 2.517511] ata13.00: ATA-8: WDC WD5001ABYS-01YNA0, 59.01D01, max UDMA/133
[ 2.524503] ata13.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 2.532023] usb 5-1: new low speed USB device using uhci_hcd and address 2
[ 2.549044] ata13.00: configured for UDMA/133
[ 2.664035] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.671595] ata7.00: ATA-8: ST3500320AS, SD15, max UDMA/133
[ 2.677235] ata7.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.685789] ata7.00: configured for UDMA/133
[ 2.828075] ata4: SATA link down (SStatus 0 SControl 310)
[ 2.841582] usb 5-1: New USB device found, idVendor=051d, idProduct=0002
[ 2.848484] usb 5-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.855837] usb 5-1: Product: Back-UPS RS 1500 FW:8.g4 .D USB FW:g4
[ 2.862397] usb 5-1: Manufacturer: American Power Conversion
[ 2.868211] usb 5-1: SerialNumber: JB0316063880
[ 2.873122] usb 5-1: configuration #1 chosen from 1 choice
[ 3.152546] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 3.182782] ata5.00: ATA-8: WDC WD5001ABYS-01YNA0, 59.01D01, max UDMA/133
[ 3.189739] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.212667] ata5.00: configured for UDMA/100
[ 3.217091] scsi 4:0:0:0: Direct-Access ATA WDC WD5001ABYS-0 59.0 PQ: 0 ANSI: 5
[ 3.544545] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 3.576840] ata6.00: ATA-8: WDC WD5001ABYS-01YNA0, 59.01D01, max UDMA/133
[ 3.583754] ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.604801] ata6.00: configured for UDMA/100
[ 3.609242] scsi 5:0:0:0: Direct-Access ATA WDC WD5001ABYS-0 59.0 PQ: 0 ANSI: 5
[ 3.617640] scsi 8:0:0:0: Direct-Access ATA WDC WD5001ABYS-0 59.0 PQ: 0 ANSI: 5
[ 3.944048] ata14: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.983940] ata14.00: ATA-7: WDC WD5000YS-01MPB1, 09.02E09, max UDMA/133
[ 3.990783] ata14.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 4.013364] ata14.00: configured for UDMA/133
[ 4.017873] scsi 10:0:0:0: Direct-Access ATA WDC WD5000YS-01M 09.0 PQ: 0 ANSI: 5
[ 4.344048] ata15: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.378557] ata15.00: ATA-7: WDC WD5000YS-01MPB1, 09.02E09, max UDMA/133
[ 4.385354] ata15.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 4.408704] ata15.00: configured for UDMA/133
[ 4.413194] scsi 12:0:0:0: Direct-Access ATA WDC WD5000YS-01M 09.0 PQ: 0 ANSI: 5
[ 4.740036] ata16: SATA link down (SStatus 0 SControl 300)
[ 4.745772] scsi 6:0:0:0: Direct-Access ATA ST3500320AS SD15 PQ: 0 ANSI: 5
[ 5.640025] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.647639] ata8.00: ATA-8: ST3500320AS, SD15, max UDMA/133
[ 5.653309] ata8.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 5.661834] ata8.00: configured for UDMA/133
[ 5.680150] scsi 7:0:0:0: Direct-Access ATA ST3500320AS SD15 PQ: 0 ANSI: 5
[ 6.008526] ata11: SATA link down (SStatus 0 SControl 300)
[ 6.348026] ata12: SATA link down (SStatus 0 SControl 300)
[ 6.372637] usbcore: registered new interface driver hiddev
[ 6.380377] Uniform Multi-Platform E-IDE driver
[ 6.389895] Driver 'sd' needs updating - please use bus_type methods
[ 6.396593] sd 1:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 6.400719] sd 4:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 6.400734] sd 4:0:0:0: [sdb] Write Protect is off
[ 6.400757] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.400856] sdb: sdb1
[ 6.429047] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 6.429057] sd 5:0:0:0: [sdc] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 6.429069] sd 5:0:0:0: [sdc] Write Protect is off
[ 6.429092] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.429178] sdc:<5>sd 8:0:0:0: [sdd] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 6.429288] sd 8:0:0:0: [sdd] Write Protect is off
[ 6.429311] sd 8:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.429389] sdd:<5>sd 10:0:0:0: [sde] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 6.429450] sd 10:0:0:0: [sde] Write Protect is off
[ 6.429473] sd 10:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.429548] sde:<5>sd 1:0:0:0: [sda] Write Protect is off
[ 6.430557] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.430676] sda: sdc1
[ 6.519207] sda1<5>sd 12:0:0:0: [sdf] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 6.519735] sd 12:0:0:0: [sdf] Write Protect is off
[ 6.519758] sd 12:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.542322]
[ 6.543909] sdf: sdd1
[ 6.546491] sd 8:0:0:0: [sdd] Attached SCSI disk
[ 6.551261] sd 6:0:0:0: [sdg] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 6.559192] sde1
[ 6.561309] sd 10:0:0:0: [sde] Attached SCSI disk
[ 6.566287] sd 7:0:0:0: [sdh] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 6.574091] sd 7:0:0:0: [sdh] Write Protect is off
[ 6.578993] sd 7:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.584514] sd 6:0:0:0: [sdg] Write Protect is off
[ 6.584546] sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.584655] sdg: sdg1 sdg2 sdg3
[ 6.605931] sdh:<5>sd 6:0:0:0: [sdg] Attached SCSI disk
[ 6.611455] sd 1:0:0:0: [sda] Attached SCSI disk
[ 6.616379] sd 5:0:0:0: [sdc] Attached SCSI disk
[ 6.632421] sdh1 sdh2 sdh3
[ 6.635517] sd 7:0:0:0: [sdh] Attached SCSI disk
[ 6.667452] sdf1
[ 6.669604] sd 12:0:0:0: [sdf] Attached SCSI disk
[ 7.670728] generic-usb 0003:051D:0002.0001: hiddev96,hidraw0: USB HID v1.10 Device [American Power Conversion Back-UPS RS 1500 FW:8.g4 .D USB FW:g4 ] on usb-0000:00:1a.2-1/input0
[ 7.687001] usbcore: registered new interface driver usbhid
[ 7.692666] usbhid: v2.6:USB HID core driver
done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Waiting for root file system ... done.
Gave up waiting for root device. Common problems:
- Boot args (cat /proc/cmdline)
- Check rootdelay= (did the system wait long enough?)
- Check root= (did the system wait for the right device?)
- Missing modules (cat /proc/modules; ls /dev)
ALERT! /dev/disk/by-uuid/e5c87f98-51b3-4073-a043-3fdc532dc611 does not exist. Dropping to a shell!
BusyBox v1.14.2 (Debian 1:1.14.2-2) built-in shell (ash)
Enter 'help' for a list of built-in commands.
/bin/sh: can't access tty; job control turned off
(initramfs) ls /dev/disk/by-uuid/
4893546c-e70f-41f8-8f5b-98d4b51acee6 7286b96f-ae26-474d-a0f6-7715d065ae64
(initramfs) ls /dev/md?
ls: /dev/md?: No such file or directory
(initramfs) cat /proc/mdstat
cat: can't open '/proc/mdstat': No such file or directory
(initramfs) lsmod
/bin/sh: lsmod: not found
(initramfs) ls /dev/sd?
/dev/sda /dev/sdc /dev/sde /dev/sdg
/dev/sdb /dev/sdd /dev/sdf /dev/sdh
(initramfs)
--- End Message ---