Bug#564010: linux-image-2.6.32-trunk-686: fails to boot
OK, shame on me: after I wrote this bug report I decided to try to
read the kernel message in details to understand more about it and
while I was doing so the kernel booted. The explanation is that since
the realtek firmware are missing, the kernel fails to turn on the
ethernet link, and hangs there for some time, then gives up and carry
on with the boot process.
So this is no longer a critical bug. Sorry about the false alarm.
However, there is still a problem with the packaging: where are the
firmwares required?
On Thu, Jan 7, 2010 at 11:19 AM, Brice Rebsamen
<brice.brice+linux@gmail.com> wrote:
> Package: linux-2.6
> Version: 2.6.32-3
> Severity: critical
> Justification: breaks the whole system
>
> I am successfully running 2.6.31. I recently upgraded to 2.6.32 and the system does not boot any more. There was a small itch during installation: I was instructed that firmwares 'iwlagn: iwlwifi-6050-4.ucode\nr8169: rtl8168d-2.fw, rtl8168d-1.fw' would be needed. I could not find iwlwifi-6050-4.ucode (it's not on intel's website and not in the the firmware-iwlwifi package) nor the realtek firmwares... Anyway I guess that those files missing would only result in the network not working, not in the kernel not booting.
>
> I guess it would be nice to post the boot log. How can I retrieve the boot log from a kernel that fails to boot? I checked in /var/log but could not find any file with a matching creation date...
>
> >From what I can see on the screen during the boot process, there MIGHT be an issue with mounting the root partition, or accessing the HD all together. But that seems weird. I am saying this because some of the last messages I can read concern accessing sda...
>
>
> -- Package-specific info:
> ** Kernel log: boot messages should be attached
>
> ** Model information
> not available
>
> ** PCI devices:
> 00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
> Subsystem: Toshiba America Info Systems Device [1179:ff40]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
> Latency: 0
> Capabilities: <access denied>
> Kernel driver in use: agpgart-intel
>
> 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller])
> Subsystem: Toshiba America Info Systems Device [1179:ff40]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 31
> Region 0: Memory at fd800000 (64-bit, non-prefetchable) [size=4M]
> Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
> Region 4: I/O ports at b400 [size=8]
> Expansion ROM at <unassigned> [disabled]
> Capabilities: <access denied>
>
> 00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07)
> Subsystem: Toshiba America Info Systems Device [1179:ff40]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Region 0: Memory at fdc00000 (64-bit, non-prefetchable) [size=1M]
> Capabilities: <access denied>
>
> 00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
> Subsystem: Toshiba America Info Systems Device [1179:ff40]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 16
> Region 4: I/O ports at b880 [size=32]
> Capabilities: <access denied>
> Kernel driver in use: uhci_hcd
>
> 00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
> Subsystem: Toshiba America Info Systems Device [1179:ff40]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin B routed to IRQ 21
> Region 4: I/O ports at b800 [size=32]
> Capabilities: <access denied>
> Kernel driver in use: uhci_hcd
>
> 00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
> Subsystem: Toshiba America Info Systems Device [1179:ff40]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin D routed to IRQ 19
> Region 4: I/O ports at b480 [size=32]
> Capabilities: <access denied>
> Kernel driver in use: uhci_hcd
>
> 00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
> Subsystem: Toshiba America Info Systems Device [1179:ff40]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin C routed to IRQ 18
> Region 0: Memory at fddff000 (32-bit, non-prefetchable) [size=1K]
> Capabilities: <access denied>
> Kernel driver in use: ehci_hcd
>
> 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
> Subsystem: Toshiba America Info Systems Device [1179:ff41]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 22
> Region 0: Memory at fddf8000 (64-bit, non-prefetchable) [size=16K]
> Capabilities: <access denied>
> Kernel driver in use: HDA Intel
>
> 00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
> Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
> Memory behind bridge: fde00000-fdefffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
> Kernel driver in use: pcieport-driver
>
> 00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
> Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
> Memory behind bridge: fdf00000-fdffffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
> Kernel driver in use: pcieport-driver
>
> 00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 [8086:2946] (rev 03) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
> Bus: primary=00, secondary=04, subordinate=06, sec-latency=0
> I/O behind bridge: 0000d000-0000dfff
> Memory behind bridge: fe000000-feafffff
> Prefetchable memory behind bridge: 00000000fa000000-00000000fcefffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
> Kernel driver in use: pcieport-driver
>
> 00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 03) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
> Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
> I/O behind bridge: 0000e000-0000efff
> Memory behind bridge: feb00000-febfffff
> Prefetchable memory behind bridge: 00000000fcf00000-00000000fcffffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
> Kernel driver in use: pcieport-driver
>
> 00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
> Subsystem: Toshiba America Info Systems Device [1179:ff40]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 23
> Region 4: I/O ports at c080 [size=32]
> Capabilities: <access denied>
> Kernel driver in use: uhci_hcd
>
> 00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
> Subsystem: Toshiba America Info Systems Device [1179:ff40]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin B routed to IRQ 19
> Region 4: I/O ports at c000 [size=32]
> Capabilities: <access denied>
> Kernel driver in use: uhci_hcd
>
> 00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
> Subsystem: Toshiba America Info Systems Device [1179:ff40]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin C routed to IRQ 18
> Region 4: I/O ports at bc00 [size=32]
> Capabilities: <access denied>
> Kernel driver in use: uhci_hcd
>
> 00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
> Subsystem: Toshiba America Info Systems Device [1179:ff40]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 23
> Region 0: Memory at fddff400 (32-bit, non-prefetchable) [size=1K]
> Capabilities: <access denied>
> Kernel driver in use: ehci_hcd
>
> 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
> Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
>
> 00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller [8086:2919] (rev 03)
> Subsystem: Toshiba America Info Systems Device [1179:ff40]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Capabilities: <access denied>
>
> 00:1f.2 SATA controller [0106]: Intel Corporation ICH9M/M-E SATA AHCI Controller [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0])
> Subsystem: Toshiba America Info Systems Device [1179:ff40]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin B routed to IRQ 28
> Region 0: I/O ports at cc00 [size=8]
> Region 1: I/O ports at c880 [size=4]
> Region 2: I/O ports at c800 [size=8]
> Region 3: I/O ports at c480 [size=4]
> Region 4: I/O ports at c400 [size=32]
> Region 5: Memory at fddff800 (32-bit, non-prefetchable) [size=2K]
> Capabilities: <access denied>
> Kernel driver in use: ahci
>
> 02:00.0 SD Host controller [0805]: Ricoh Co Ltd Device [1180:e822] (rev 01)
> Subsystem: Toshiba America Info Systems Device [1179:ff40]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 16
> Region 0: Memory at fdeffc00 (32-bit, non-prefetchable) [size=256]
> Capabilities: <access denied>
> Kernel driver in use: sdhci-pci
>
> 02:00.1 System peripheral [0880]: Ricoh Co Ltd Device [1180:e230] (rev 01)
> Subsystem: Toshiba America Info Systems Device [1179:ff40]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
> Interrupt: pin B routed to IRQ 5
> Region 0: Memory at fdeff800 (32-bit, non-prefetchable) [size=256]
> Capabilities: <access denied>
>
> 02:00.2 System peripheral [0880]: Ricoh Co Ltd Device [1180:e852] (rev 01)
> Subsystem: Toshiba America Info Systems Device [1179:ff40]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
> Interrupt: pin C routed to IRQ 14
> Region 0: Memory at fdeff400 (32-bit, non-prefetchable) [size=256]
> Capabilities: <access denied>
>
> 03:00.0 Network controller [0280]: Intel Corporation Wireless WiFi Link 5100 [8086:4232]
> Subsystem: Intel Corporation Device [8086:1201]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 30
> Region 0: Memory at fdffe000 (64-bit, non-prefetchable) [size=8K]
> Capabilities: <access denied>
> Kernel driver in use: iwlagn
>
> 07:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
> Subsystem: Toshiba America Info Systems Device [1179:ff40]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 29
> Region 0: I/O ports at e800 [size=256]
> Region 2: Memory at fcfff000 (64-bit, prefetchable) [size=4K]
> Region 4: Memory at fcff8000 (64-bit, prefetchable) [size=16K]
> Expansion ROM at febe0000 [disabled] [size=128K]
> Capabilities: <access denied>
> Kernel driver in use: r8169
>
>
> ** USB devices:
> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 007 Device 002: ID 08ff:2550 AuthenTec, Inc.
> Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 006 Device 002: ID 093a:2510 Pixart Imaging, Inc. Hama Optical Mouse
> Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 001 Device 002: ID 04f2:b130 Chicony Electronics Co., Ltd
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>
>
> -- System Information:
> Debian Release: squeeze/sid
> APT prefers unstable
> APT policy: (500, 'unstable')
> Architecture: i386 (i686)
>
> Kernel: Linux 2.6.31-1-686 (SMP w/2 CPU cores)
> Locale: LANG=en_SG.UTF-8, LC_CTYPE=en_SG.UTF-8 (charmap=UTF-8)
> Shell: /bin/sh linked to /bin/dash
>
> Versions of packages linux-image-2.6.32-trunk-686 depends on:
> ii debconf [debconf-2.0] 1.5.28 Debian configuration management sy
> ii initramfs-tools [linux-initra 0.93.4 tools for generating an initramfs
> ii module-init-tools 3.11-1 tools for managing Linux kernel mo
>
> Versions of packages linux-image-2.6.32-trunk-686 recommends:
> ii firmware-linux-free 2.6.32-3 Binary firmware for various driver
> ii libc6-i686 2.10.2-3 GNU C Library: Shared libraries [i
>
> Versions of packages linux-image-2.6.32-trunk-686 suggests:
> ii grub-legacy [grub] 0.97-59 GRand Unified Bootloader (Legacy v
> pn linux-doc-2.6.32 <none> (no description available)
>
> Versions of packages linux-image-2.6.32-trunk-686 is related to:
> pn firmware-bnx2 <none> (no description available)
> pn firmware-bnx2x <none> (no description available)
> pn firmware-ipw2x00 <none> (no description available)
> pn firmware-ivtv <none> (no description available)
> ii firmware-iwlwifi 0.22 Binary firmware for Intel Wireless
> pn firmware-linux <none> (no description available)
> pn firmware-linux-nonfree <none> (no description available)
> pn firmware-qlogic <none> (no description available)
> pn firmware-ralink <none> (no description available)
>
> -- debconf information:
> linux-image-2.6.32-trunk-686/prerm/would-invalidate-boot-loader-2.6.32-trunk-686: true
> linux-image-2.6.32-trunk-686/postinst/bootloader-test-error-2.6.32-trunk-686:
> shared/kernel-image/really-run-bootloader: true
> linux-image-2.6.32-trunk-686/postinst/depmod-error-initrd-2.6.32-trunk-686: false
> linux-image-2.6.32-trunk-686/prerm/removing-running-kernel-2.6.32-trunk-686: true
> linux-image-2.6.32-trunk-686/postinst/bootloader-error-2.6.32-trunk-686:
> * linux-image-2.6.32-trunk-686/postinst/missing-firmware-2.6.32-trunk-686:
>
>
>
Reply to: