--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.32-trunk-amd64: After boot, the current virtual console is not TTY1
- From: Jason White <jason@jasonjgw.net>
- Date: Tue, 22 Dec 2009 11:27:15 +1100
- Message-id: <20091222002715.5429.1832.reportbug@localhost.localdomain>
Package: linux-2.6
Version: 2.6.32-2
Severity: normal
I am experiencing the problem described here:
http://article.gmane.org/gmane.linux.kernel/927536/
after upgrading to the 2.6.32 kernel.
The symptom is that after boot, the current virtual console is not tty1, but
instead, for example, tty6 or tty3 (apparently randomly).
-- Package-specific info:
** Version:
Linux version 2.6.32-trunk-amd64 (Debian 2.6.32-2) (ben@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Thu Dec 17 06:29:18 UTC 2009
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-trunk-amd64 root=UUID=7e6b3589-6e9d-49d9-845e-80bc54b055cb ro quiet
** Not tainted
** Kernel log:
[ 9.083243] mptsas: ioc0: attaching raid volume, channel 1, id 0
[ 9.083736] scsi 6:1:0:0: Direct-Access LSILOGIC Logical Volume 3000 PQ: 0 ANSI: 2
[ 9.092062] sd 6:1:0:0: [sda] 285155328 512-byte logical blocks: (145 GB/135 GiB)
[ 9.092296] sd 6:1:0:0: [sda] Write Protect is off
[ 9.092300] sd 6:1:0:0: [sda] Mode Sense: 03 00 00 08
[ 9.092695] sd 6:1:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.093693] sda: sda1
[ 9.103095] sd 6:1:0:0: [sda] Attached SCSI disk
[ 9.242615] device-mapper: uevent: version 1.0.3
[ 9.242735] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 9.267685] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 9.268689] SGI XFS Quota Management subsystem
[ 9.277879] XFS mounting filesystem sda1
[ 9.339085] Ending clean XFS mount for filesystem: sda1
[ 10.853606] udev: starting version 149
[ 11.385131] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 11.392178] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS
[ 11.392185] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88013fa3f9a0), AE_ALREADY_EXISTS
[ 11.392214] ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20090903/nspredef-336)
[ 11.392338] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.401913] ACPI: WMI: Mapper loaded
[ 11.522203] parport_pc 00:07: reported by Plug and Play ACPI
[ 11.522259] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 11.745899] RME Digi9652 (Hammerfall) 0000:01:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 11.775416] ACPI: SSDT 00000000bffe95de 008C4 (v01 COMPAQ CPU_TM2 00000001 MSFT 0100000E)
[ 11.775765] processor LNXCPU:00: registered as cooling_device0
[ 11.776026] processor LNXCPU:01: registered as cooling_device1
[ 11.776417] processor LNXCPU:02: registered as cooling_device2
[ 11.776691] processor LNXCPU:03: registered as cooling_device3
[ 11.846275] intel_rng: Firmware space is locked read-only. If you can't or
[ 11.846276] intel_rng: don't want to disable this in firmware setup, and if
[ 11.846277] intel_rng: you are certain that your system has a functional
[ 11.846279] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 11.972654] usbcore: registered new interface driver snd-usb-audio
[ 12.082608] alloc irq_desc for 21 on node -1
[ 12.082611] alloc kstat_irqs on node -1
[ 12.082619] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 12.082674] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 12.183050] EDAC MC: Ver: 2.1.0 Dec 17 2009
[ 12.232045] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 12.234922] EDAC MC0: Giving out device to 'i5000_edac.c' 'I5000': DEV 0000:00:10.0
[ 12.234943] EDAC PCI0: Giving out device to module 'i5000_edac' controller 'EDAC PCI controller': DEV '0000:00:10.0' (POLLED)
[ 13.376934] loop: module loaded
[ 13.400237] scsi 6:0:0:0: Attached scsi generic sg0 type 0
[ 13.400351] scsi 6:0:1:0: Attached scsi generic sg1 type 0
[ 13.400416] sd 6:1:0:0: Attached scsi generic sg2 type 0
[ 13.412838] smsc47b397: found SMSC SCH5307-NS (base address 0x0480, revision 0)
[ 13.412866] ACPI: I/O resource smsc47b397 [0x480-0x481] conflicts with ACPI region SIOH [0x480-0x48f]
[ 13.412921] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 13.456511] coretemp coretemp.0: Using relative temperature scale!
[ 13.456621] coretemp coretemp.1: Using relative temperature scale!
[ 13.456725] coretemp coretemp.2: Using relative temperature scale!
[ 13.456842] coretemp coretemp.3: Using relative temperature scale!
[ 13.523131] tun: Universal TUN/TAP device driver, 1.6
[ 13.523134] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 13.544796] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 14.065621] Error: Driver 'pcspkr' is already registered, aborting...
[ 14.530673] fuse init (API version 7.13)
[ 16.170234] alloc irq_desc for 33 on node -1
[ 16.170238] alloc kstat_irqs on node -1
[ 16.170455] tg3 0000:1f:00.0: irq 33 for MSI/MSI-X
[ 16.204699] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.580849] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 16.619572] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 16.619853] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 16.619855] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 16.619857] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 17.843483] tg3: eth0: Link is up at 100 Mbps, full duplex.
[ 17.843486] tg3: eth0: Flow control is off for TX and off for RX.
[ 17.844059] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 24.575775] RPC: Registered udp transport module.
[ 24.575778] RPC: Registered tcp transport module.
[ 24.575780] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 24.919045] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 24.998948] svc: failed to register lockdv1 RPC service (errno 97).
[ 24.999895] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 25.005723] NFSD: starting 90-second grace period
[ 30.466193] Bluetooth: Core ver 2.15
[ 30.466254] NET: Registered protocol family 31
[ 30.466256] Bluetooth: HCI device and connection manager initialized
[ 30.466259] Bluetooth: HCI socket layer initialized
[ 30.486892] Bluetooth: L2CAP ver 2.14
[ 30.486895] Bluetooth: L2CAP socket layer initialized
[ 30.535232] Bluetooth: RFCOMM TTY layer initialized
[ 30.535236] Bluetooth: RFCOMM socket layer initialized
[ 30.535238] Bluetooth: RFCOMM ver 1.11
[ 30.575044] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 30.575048] Bluetooth: BNEP filters: protocol multicast
[ 30.603900] Bridge firewalling registered
[ 30.660389] Bluetooth: SCO (Voice Link) ver 0.6
[ 30.660392] Bluetooth: SCO socket layer initialized
[ 32.049931] lo: Disabled Privacy Extensions
[ 33.114399] lp0: using parport0 (interrupt-driven).
[ 33.121953] ppdev: user-space parallel port driver
[ 56.164299] sd 6:1:0:0: Queue depth not changed yet
[ 56.184762] sd 6:1:0:0: Queue depth not changed yet
[ 832.996520] sd 6:1:0:0: Queue depth not changed yet
[ 837.000017] sd 6:1:0:0: Queue depth not changed yet
[ 862.336768] sd 6:1:0:0: Queue depth not changed yet
[ 4470.144433] sendmail[4435]: segfault at 7fffc4ad10d8 ip 00007f972ba8085b sp 00007fffc4ad1070 error 6 in sendmail[7f972b9ea000+ce000]
** Model information
sys_vendor: Hewlett-Packard
product_name: HP xw6400 Workstation
product_version:
chassis_vendor: Hewlett-Packard
chassis_version:
bios_vendor: Hewlett-Packard
bios_version: 786D4 v01.23
board_vendor: Hewlett-Packard
board_name: 0A04h
board_version: NA
** Loaded modules:
Module Size Used by
binfmt_misc 6399 1
ppdev 5030 0
lp 7462 0
sco 7193 2
bridge 39438 0
stp 1440 1 bridge
bnep 9331 2
rfcomm 29437 0
l2cap 24656 6 bnep,rfcomm
crc16 1319 1 l2cap
bluetooth 41731 6 sco,bnep,rfcomm,l2cap
rfkill 12932 2 bluetooth
nfsd 252902 11
lockd 57395 1 nfsd
nfs_acl 2031 1 nfsd
auth_rpcgss 33140 1 nfsd
sunrpc 160641 10 nfsd,lockd,nfs_acl,auth_rpcgss
acpi_cpufreq 5523 0
cpufreq_powersave 902 0
cpufreq_conservative 5162 0
cpufreq_stats 2659 0
cpufreq_userspace 1960 0
ipt_MASQUERADE 1554 1
iptable_nat 4267 1
nf_nat 13244 2 ipt_MASQUERADE,iptable_nat
nf_conntrack_ipv4 9817 3 iptable_nat,nf_nat
nf_conntrack 46167 4 ipt_MASQUERADE,iptable_nat,nf_nat,nf_conntrack_ipv4
nf_defrag_ipv4 1123 1 nf_conntrack_ipv4
iptable_filter 2258 0
ip_tables 13899 2 iptable_nat,iptable_filter
x_tables 12813 3 ipt_MASQUERADE,iptable_nat,ip_tables
fuse 49886 1
dm_snapshot 18377 0
dm_mirror 10891 0
dm_region_hash 6616 1 dm_mirror
dm_log 7381 2 dm_mirror,dm_region_hash
snd_pcsp 6579 0
tun 10780 2
kvm_intel 37600 6
kvm 210824 1 kvm_intel
coretemp 4165 0
sg 18696 0
loop 11735 0
snd_hda_codec_realtek 235111 1
i5000_edac 7252 0
edac_core 29245 3 i5000_edac
i5k_amb 4407 0
snd_hda_intel 17851 0
snd_usb_audio 62902 0
snd_hda_codec 52900 2 snd_hda_codec_realtek,snd_hda_intel
snd_usb_lib 13713 1 snd_usb_audio
rng_core 2990 0
processor 29415 1 acpi_cpufreq
snd_rme9652 19635 0
psmouse 35229 0
parport_pc 18839 1
parport 27938 3 ppdev,lp,parport_pc
snd_pcm_oss 32399 0
snd_mixer_oss 12606 1 snd_pcm_oss
snd_pcm 60615 6 snd_pcsp,snd_hda_intel,snd_usb_audio,snd_hda_codec,snd_rme9652,snd_pcm_oss
wmi 4307 0
shpchp 25928 0
pci_hotplug 21171 1 shpchp
snd_seq_midi 4208 0
snd_seq_midi_event 4628 1 snd_seq_midi
snd_seq 42641 2 snd_seq_midi,snd_seq_midi_event
snd_rawmidi 15291 2 snd_usb_lib,snd_seq_midi
snd_timer 15502 2 snd_pcm,snd_seq
snd_seq_device 4477 3 snd_seq_midi,snd_seq,snd_rawmidi
snd_hwdep 5364 2 snd_usb_audio,snd_hda_codec
snd 44686 14 snd_pcsp,snd_hda_codec_realtek,snd_hda_intel,snd_usb_audio,snd_hda_codec,snd_rme9652,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq,snd_rawmidi,snd_timer,snd_seq_device,snd_hwdep
soundcore 4614 1 snd
snd_page_alloc 6153 3 snd_hda_intel,snd_rme9652,snd_pcm
evdev 7336 8
serio_raw 3752 0
xfs 434172 1
exportfs 3138 2 nfsd,xfs
dm_mod 53354 3 dm_snapshot,dm_mirror,dm_log
sd_mod 29609 2
crc_t10dif 1276 1 sd_mod
ide_cd_mod 24712 0
cdrom 29399 1 ide_cd_mod
ide_pci_generic 2788 0
ata_generic 2983 0
usbhid 31068 2
hid 62681 1 usbhid
uhci_hcd 18393 0
ahci 31462 0
mptsas 28996 1
mptscsih 15832 1 mptsas
mptbase 48222 2 mptsas,mptscsih
libata 131431 2 ata_generic,ahci
tg3 95391 0
floppy 47679 0
libphy 13510 1 tg3
scsi_transport_sas 19785 1 mptsas
piix 4568 0
ide_core 76514 3 ide_cd_mod,ide_pci_generic,piix
ehci_hcd 30354 0
usbcore 121319 8 snd_usb_audio,snd_usb_lib,usbhid,uhci_hcd,ehci_hcd
scsi_mod 121685 6 sg,sd_mod,mptsas,mptscsih,libata,scsi_transport_sas
nls_base 6377 1 usbcore
button 4618 0
thermal 11674 0
fan 3346 0
thermal_sys 11878 3 processor,thermal,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 5000X Chipset Memory Controller Hub [8086:25c0] (rev 12)
Subsystem: Hewlett-Packard Company Device [103c:3014]
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Capabilities: <access denied>
00:02.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 2 [8086:25e2] (rev 12) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=10, subordinate=20, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d5200000-d76fffff
Prefetchable memory behind bridge: 00000000d0200000-00000000d03fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:03.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 3 [8086:25e3] (rev 12) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=60, subordinate=60, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:04.0 PCI bridge [0604]: Intel Corporation 5000X Chipset PCI Express x16 Port 4-7 [8086:25fa] (rev 12) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=40, subordinate=40, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: d1000000-d31fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000d01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:05.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 5 [8086:25e5] (rev 12) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=fe, subordinate=fe, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:06.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 6 [8086:25e6] (rev 12) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=fd, subordinate=fd, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:07.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 7 [8086:25e7] (rev 12) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=fc, subordinate=fc, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:10.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FSB Registers [8086:25f0] (rev 12)
Subsystem: Hewlett-Packard Company Device [103c:3014]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: i5000_edac
00:10.1 Host bridge [0600]: Intel Corporation 5000 Series Chipset FSB Registers [8086:25f0] (rev 12)
Subsystem: Hewlett-Packard Company Device [103c:3014]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:10.2 Host bridge [0600]: Intel Corporation 5000 Series Chipset FSB Registers [8086:25f0] (rev 12)
Subsystem: Hewlett-Packard Company Device [103c:3014]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:11.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset Reserved Registers [8086:25f1] (rev 12)
Subsystem: Hewlett-Packard Company Device [103c:3014]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:13.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset Reserved Registers [8086:25f3] (rev 12)
Subsystem: Hewlett-Packard Company Device [103c:3014]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:15.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FBD Registers [8086:25f5] (rev 12)
Subsystem: Hewlett-Packard Company Device [103c:3014]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:16.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FBD Registers [8086:25f6] (rev 12)
Subsystem: Hewlett-Packard Company Device [103c:3014]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1b.0 Audio device [0403]: Intel Corporation 631xESB/632xESB High Definition Audio Controller [8086:269a] (rev 09)
Subsystem: Hewlett-Packard Company Device [103c:3014]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at d0400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 1 [8086:2690] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=80, subordinate=80, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #1 [8086:2688] (rev 09) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:3014]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 3000 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #2 [8086:2689] (rev 09) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:3014]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 3020 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #3 [8086:268a] (rev 09) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:3014]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 3040 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #4 [8086:268b] (rev 09) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:3014]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 4: I/O ports at 3060 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset EHCI USB2 Controller [8086:268c] (rev 09) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:3014]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0404000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev d9) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: d4000000-d51fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 631xESB/632xESB/3100 Chipset LPC Interface Controller [8086:2670] (rev 09)
Subsystem: Hewlett-Packard Company Device [103c:3014]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.1 IDE interface [0101]: Intel Corporation 631xESB/632xESB IDE Controller [8086:269e] (rev 09) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Device [103c:3014]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 30c0 [size=16]
Kernel driver in use: PIIX_IDE
00:1f.2 RAID bus controller [0104]: Intel Corporation 631xESB/632xESB SATA RAID Controller [8086:2682] (rev 09)
Subsystem: Hewlett-Packard Company Device [103c:3014]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 30e0 [size=8]
Region 1: I/O ports at 30f8 [size=4]
Region 2: I/O ports at 30e8 [size=8]
Region 3: I/O ports at 30fc [size=4]
Region 4: I/O ports at 3080 [size=32]
Region 5: Memory at d0404400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
01:04.0 Multimedia audio controller [0401]: Xilinx Corporation RME Digi9652 (Hammerfall) [10ee:3fc4] (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=16M]
Kernel driver in use: RME Digi9652 (Hammerfall)
10:00.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Upstream Port [8086:3500] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=10, secondary=1e, subordinate=20, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d5200000-d59fffff
Prefetchable memory behind bridge: 00000000d0200000-00000000d03fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
10:00.3 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express to PCI-X Bridge [8086:350c] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Region 0: Memory at d7601000 (64-bit, non-prefetchable) [size=4K]
Bus: primary=10, secondary=11, subordinate=1d, sec-latency=32
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
1e:00.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E1 [8086:3510] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=1e, secondary=20, subordinate=20, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d5200000-d54fffff
Prefetchable memory behind bridge: 00000000d0200000-00000000d03fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
1e:01.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E2 [8086:3514] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=1e, secondary=1f, subordinate=1f, sec-latency=0
Memory behind bridge: d5500000-d57fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
1f:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5752 Gigabit Ethernet PCI Express [14e4:1600] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:3014]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 33
Region 0: Memory at d5500000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3
20:00.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic SAS1064ET PCI-Express Fusion-MPT SAS [1000:0056] (rev 02)
Subsystem: LSI Logic / Symbios Logic Device [1000:3090]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 2000 [size=256]
Region 1: Memory at d5410000 (64-bit, non-prefetchable) [size=16K]
Region 3: Memory at d5400000 (64-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at d0200000 [disabled] [size=2M]
Capabilities: <access denied>
Kernel driver in use: mptsas
40:00.0 VGA compatible controller [0300]: nVidia Corporation G71GL [Quadro FX 3500] [10de:029d] (rev a1) (prog-if 00 [VGA controller])
Subsystem: nVidia Corporation Device [10de:032b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 3
Region 0: Memory at d1000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at d2000000 (64-bit, non-prefetchable) [size=16M]
Region 5: I/O ports at 1000 [size=128]
[virtual] Expansion ROM at d0000000 [disabled] [size=128K]
Capabilities: <access denied>
** USB devices:
Bus 004 Device 002: ID 051d:0002 American Power Conversion Uninterruptible Power Supply
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 0403:fe72 Future Technology Devices International, Ltd
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 046d:c016 Logitech, Inc. M-UV69a/HP M-UV96 Optical Wheel Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 007: ID 03f0:0324 Hewlett-Packard
Bus 001 Device 006: ID 1395:0002 Sennheiser Communications
Bus 001 Device 003: ID 0424:2504 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (990, 'unstable'), (500, 'testing'), (500, 'stable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-trunk-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.32-trunk-amd64 depends on:
ii debconf [debconf-2.0] 1.5.28 Debian configuration management sy
ii initramfs-tools [linux-initra 0.93.4 tools for generating an initramfs
ii module-init-tools 3.11-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-trunk-amd64 recommends:
ii firmware-linux-free 2.6.32-2 Binary firmware for various driver
Versions of packages linux-image-2.6.32-trunk-amd64 suggests:
ii grub 0.97-59 GRand Unified Bootloader (dummy pa
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-trunk-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
-- debconf information:
linux-image-2.6.32-trunk-amd64/postinst/depmod-error-initrd-2.6.32-trunk-amd64: false
linux-image-2.6.32-trunk-amd64/prerm/would-invalidate-boot-loader-2.6.32-trunk-amd64: true
linux-image-2.6.32-trunk-amd64/postinst/bootloader-error-2.6.32-trunk-amd64:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-trunk-amd64/prerm/removing-running-kernel-2.6.32-trunk-amd64: true
linux-image-2.6.32-trunk-amd64/postinst/bootloader-test-error-2.6.32-trunk-amd64:
* linux-image-2.6.32-trunk-amd64/postinst/missing-firmware-2.6.32-trunk-amd64:
--- End Message ---