--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.26-1-686: software clock runs much too fast
- From: Jörg Ludwig <joerg.ludwig@iserv.eu>
- Date: Tue, 17 Mar 2009 11:42:15 +0100
- Message-id: <20090317104215.30229.11195.reportbug@iserv.franziskus-whv-ps.de>
Package: linux-image-2.6.26-1-686
Version: 2.6.26-13
Severity: normal
# ntpdate ptbtime1.ptb.de; while :; do sleep 100; ntpdate ptbtime1.ptb.de; done
17 Mar 10:52:18 ntpdate[29182]: step time server 192.53.103.108 offset -17.468994 sec
17 Mar 10:52:47 ntpdate[29185]: step time server 192.53.103.108 offset -71.892205 sec
17 Mar 10:53:16 ntpdate[29193]: step time server 192.53.103.108 offset -71.886435 sec
17 Mar 10:53:44 ntpdate[29195]: step time server 192.53.103.108 offset -72.197753 sec
17 Mar 10:54:14 ntpdate[29212]: step time server 192.53.103.108 offset -71.779842 sec
17 Mar 10:54:43 ntpdate[29312]: step time server 192.53.103.108 offset -71.669792 sec
17 Mar 10:55:11 ntpdate[29491]: step time server 192.53.103.108 offset -72.096492 sec
17 Mar 10:55:40 ntpdate[29592]: step time server 192.53.103.108 offset -71.670617 sec
17 Mar 10:56:09 ntpdate[29687]: step time server 192.53.103.108 offset -71.891274 sec
17 Mar 10:56:38 ntpdate[29691]: step time server 192.53.103.108 offset -71.886683 sec
17 Mar 10:57:07 ntpdate[29694]: step time server 192.53.103.108 offset -71.885346 sec
17 Mar 10:57:36 ntpdate[29703]: step time server 192.53.103.108 offset -72.007444 sec
17 Mar 10:58:04 ntpdate[29707]: step time server 192.53.103.108 offset -71.806236 sec
17 Mar 10:58:33 ntpdate[29716]: step time server 192.53.103.108 offset -71.881047 sec
17 Mar 10:59:02 ntpdate[29745]: step time server 192.53.103.108 offset -71.877985 sec
-- Package-specific info:
** Version:
Linux version 2.6.26-1-686 (Debian 2.6.26-13) (waldi@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Sat Jan 10 18:29:31 UTC 2009
** Command line:
root=/dev/hda1 ro
** Not tainted
** Kernel log:
[ 3.870061] Uniform Multi-Platform E-IDE driver
[ 3.870103] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 3.874823] No dock devices found.
[ 3.902308] usb usb1: configuration #1 chosen from 1 choice
[ 3.902371] hub 1-0:1.0: USB hub found
[ 3.902414] hub 1-0:1.0: 8 ports detected
[ 3.938154] SCSI subsystem initialized
[ 3.942745] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
[ 3.942787] Copyright (c) 1999-2006 Intel Corporation.
[ 3.974159] ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
[ 3.974219] libata version 3.00 loaded.
[ 4.006101] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.006145] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.006194] usb usb1: Product: OHCI Host Controller
[ 4.006230] usb usb1: Manufacturer: Linux 2.6.26-1-686 ohci_hcd
[ 4.006267] usb usb1: SerialNumber: 0000:00:02.0
[ 4.006628] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 10
[ 4.006666] PCI: setting IRQ 10 as level-triggered
[ 4.006669] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 10 (level, low) -> IRQ 10
[ 4.006770] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 4.006773] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 4.006829] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[ 4.006900] ehci_hcd 0000:00:02.1: debug port 1
[ 4.006938] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[ 4.006947] ehci_hcd 0000:00:02.1: irq 10, io mem 0xfe02e000
[ 4.017993] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.018112] usb usb2: configuration #1 chosen from 1 choice
[ 4.018173] hub 2-0:1.0: USB hub found
[ 4.018213] hub 2-0:1.0: 8 ports detected
[ 4.122087] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.122130] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.122179] usb usb2: Product: EHCI Host Controller
[ 4.122215] usb usb2: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
[ 4.122253] usb usb2: SerialNumber: 0000:00:02.1
[ 4.122320] NFORCE-MCP61: 0000:00:06.0 (rev a2) UDMA133 controller
[ 4.122359] NFORCE-MCP61: IDE controller (0x10de:0x03ec rev 0xa2) at PCI slot 0000:00:06.0
[ 4.122428] NFORCE-MCP61: not 100% native mode: will probe irqs later
[ 4.122470] NFORCE-MCP61: IDE port disabled
[ 4.122508] ide0: BM-DMA at 0xf000-0xf007
[ 4.122547] Probing IDE interface ide0...
[ 4.434077] hda: Maxtor 6L160P0, ATA DISK drive
[ 4.882076] hdb: HL-DT-STDVD-ROM GDR8160B, ATAPI CD/DVD-ROM drive
[ 4.938018] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 4.942349] hda: UDMA/133 mode selected
[ 4.946726] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 4.990047] hdb: UDMA/33 mode selected
[ 4.990992] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 5.075017] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 10
[ 5.075060] ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNK1] -> GSI 10 (level, low) -> IRQ 10
[ 5.885985] e1000: 0000:01:05.0: e1000_probe: (PCI:33MHz:32-bit) 00:0e:0c:b1:9f:6b
[ 6.123008] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 6.126452] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 5
[ 6.129983] ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [LNK2] -> GSI 5 (level, low) -> IRQ 5
[ 6.130374] eth1: RealTek RTL-8029 found at 0xc800, IRQ 5, 00:e0:7d:82:e6:a3.
[ 6.142100] sata_nv 0000:00:08.0: version 3.5
[ 6.142342] ACPI: PCI Interrupt Link [LSID] enabled at IRQ 11
[ 6.142382] PCI: setting IRQ 11 as level-triggered
[ 6.142386] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LSID] -> GSI 11 (level, low) -> IRQ 11
[ 6.142511] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 6.142745] scsi0 : sata_nv
[ 6.142838] scsi1 : sata_nv
[ 6.143001] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 11
[ 6.143041] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 11
[ 6.186069] hda: max request size: 512KiB
[ 6.190476] hda: 320173056 sectors (163928 MB) w/8192KiB Cache, CHS=19929/255/63
[ 6.194961] hda: cache flushes supported
[ 6.195034] hda: hda1 hda2 < hda5 >
[ 6.350389] hdb: ATAPI 48X DVD-ROM drive, 512kB Cache
[ 6.350527] Uniform CD-ROM driver Revision: 3.20
[ 6.469980] ata1: SATA link down (SStatus 0 SControl 300)
[ 6.797980] ata2: SATA link down (SStatus 0 SControl 300)
[ 7.518533] PM: Starting manual resume from disk
[ 7.730607] kjournald starting. Commit interval 5 seconds
[ 7.730654] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.174665] input: PC Speaker as /class/input/input1
[ 15.166730] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[ 15.166783] i2c-adapter i2c-1: nForce2 SMBus adapter at 0xf400
[ 15.502440] Error: Driver 'pcspkr' is already registered, aborting...
[ 15.814831] input: Power Button (FF) as /class/input/input2
[ 15.842033] ACPI: Power Button (FF) [PWRF]
[ 15.842133] input: Power Button (CM) as /class/input/input3
[ 15.874019] ACPI: Power Button (CM) [PWRB]
[ 16.734266] input: ImExPS/2 Generic Explorer Mouse as /class/input/input4
[ 16.770193] parport_pc 00:08: reported by Plug and Play ACPI
[ 16.770281] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 19.278633] Adding 995988k swap on /dev/hda5. Priority:-1 extents:1 across:995988k
[ 19.794849] EXT3 FS on hda1, internal journal
[ 23.998554] loop: module loaded
[ 24.222676] device-mapper: uevent: version 1.0.3
[ 24.226223] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 28.106384] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 28.930407] PPP generic driver version 2.4.2
[ 29.226196] NET: Registered protocol family 10
[ 29.226669] lo: Disabled Privacy Extensions
[ 33.451041] warning: `named' uses 32-bit capabilities (legacy support in use)
[ 34.578448] NET: Registered protocol family 24
[ 39.665982] eth1: no IPv6 routers present
[ 40.173985] eth0: no IPv6 routers present
[ 80.974979] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 81.407109] nf_conntrack version 0.5.0 (15360 buckets, 61440 max)
** Loaded modules:
Module Size Used by
ipt_REJECT 2784 1
xt_TCPMSS 3616 1
ipt_REDIRECT 1760 1
xt_tcpudp 2816 2
xt_mac 1728 24
nf_nat_tftp 1568 0
nf_conntrack_tftp 4180 1 nf_nat_tftp
nf_nat_sip 5440 0
nf_conntrack_sip 16092 1 nf_nat_sip
nf_nat_pptp 2880 0
nf_nat_proto_gre 2212 1 nf_nat_pptp
nf_conntrack_pptp 5476 1 nf_nat_pptp
nf_conntrack_proto_gre 4416 1 nf_conntrack_pptp
nf_nat_irc 2080 0
nf_conntrack_irc 5124 1 nf_nat_irc
nf_nat_h323 5728 0
nf_conntrack_h323 44712 1 nf_nat_h323
nf_nat_ftp 2528 0
nf_conntrack_ftp 6852 1 nf_nat_ftp
nf_nat_amanda 1824 0
ts_kmp 1824 5
nf_conntrack_amanda 3808 1 nf_nat_amanda
ipt_MASQUERADE 2592 1
iptable_nat 4680 1
nf_nat 15576 11 ipt_REDIRECT,nf_nat_tftp,nf_nat_sip,nf_nat_pptp,nf_nat_proto_gre,nf_nat_irc,nf_nat_h323,nf_nat_ftp,nf_nat_amanda,ipt_MASQUERADE,iptable_nat
nf_conntrack_ipv4 12268 3 iptable_nat,nf_nat
nf_conntrack 55508 19 nf_nat_tftp,nf_conntrack_tftp,nf_nat_sip,nf_conntrack_sip,nf_nat_pptp,nf_conntrack_pptp,nf_conntrack_proto_gre,nf_nat_irc,nf_conntrack_irc,nf_nat_h323,nf_conntrack_h323,nf_nat_ftp,nf_conntrack_ftp,nf_nat_amanda,nf_conntrack_amanda,ipt_MASQUERADE,iptable_nat,nf_nat,nf_conntrack_ipv4
iptable_mangle 2688 0
iptable_filter 2624 1
ip_tables 10160 3 iptable_nat,iptable_mangle,iptable_filter
x_tables 13284 8 ipt_REJECT,xt_TCPMSS,ipt_REDIRECT,xt_tcpudp,xt_mac,ipt_MASQUERADE,iptable_nat,ip_tables
ac 4196 0
battery 10180 0
pppoe 8672 2
pppox 3116 1 pppoe
ipv6 235300 40
ppp_generic 20028 6 pppoe,pppox
slhc 5408 1 ppp_generic
dm_snapshot 14340 0
dm_mirror 15104 0
dm_log 8452 1 dm_mirror
dm_mod 46184 3 dm_snapshot,dm_mirror,dm_log
loop 12748 0
button 6096 0
snd_pcm 62596 0
snd_timer 17800 1 snd_pcm
snd 45604 2 snd_pcm,snd_timer
soundcore 6368 1 snd
snd_page_alloc 7816 1 snd_pcm
k8temp 4064 0
i2c_nforce2 5536 0
i2c_core 19828 1 i2c_nforce2
evdev 8000 0
parport_pc 22500 0
parport 30988 1 parport_pc
serio_raw 4740 0
psmouse 32336 0
pcspkr 2432 0
ext3 105512 1
jbd 39444 1 ext3
mbcache 7108 1 ext3
ide_cd_mod 27652 0
cdrom 30176 1 ide_cd_mod
ide_disk 10496 3
sata_nv 19208 0
ata_generic 4676 0
ne2k_pci 7968 0
8390 8256 1 ne2k_pci
libata 140384 2 sata_nv,ata_generic
e1000 102624 0
amd74xx 7752 0 [permanent]
scsi_mod 129356 1 libata
dock 8304 1 libata
ehci_hcd 28428 0
ide_core 96168 3 ide_cd_mod,ide_disk,amd74xx
ohci_hcd 18500 0
usbcore 118160 3 ehci_hcd,ohci_hcd
thermal 15228 0
processor 32576 1 thermal
fan 4164 0
thermal_sys 10856 3 thermal,processor,fan
** PCI devices:
00:00.0 RAM memory [0500]: nVidia Corporation MCP61 Memory Controller [10de:03ea] (rev a1)
Subsystem: Elitegroup Computer Systems Unknown device [1019:2602]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [44] HyperTransport: Slave or Primary Interface
Command: BaseUnitID=0 UnitCnt=17 MastHost- DefDir- DUL-
Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
Revision ID: 1.03
Link Frequency 0: 1.0GHz
Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
Link Frequency 1: 200MHz
Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
Prefetchable memory behind bridge Upper: 00-00
Bus Number: 00
Capabilities: [dc] HyperTransport: MSI Mapping
00:01.0 ISA bridge [0601]: nVidia Corporation MCP61 LPC Bridge [10de:03e0] (rev a2)
Subsystem: Elitegroup Computer Systems Unknown device [1019:2602]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:01.1 SMBus [0c05]: nVidia Corporation MCP61 SMBus [10de:03eb] (rev a2)
Subsystem: Elitegroup Computer Systems Unknown device [1019:2602]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at fc00 [size=64]
Region 4: I/O ports at 1c00 [size=64]
Region 5: I/O ports at f400 [size=64]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.2 RAM memory [0500]: nVidia Corporation MCP61 Memory Controller [10de:03f5] (rev a2)
Subsystem: Elitegroup Computer Systems Unknown device [1019:2602]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:02.0 USB Controller [0c03]: nVidia Corporation MCP61 USB Controller [10de:03f1] (rev a3) (prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems Unknown device [1019:2602]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 5
Region 0: Memory at fe02f000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:02.1 USB Controller [0c03]: nVidia Corporation MCP61 USB Controller [10de:03f2] (rev a3) (prog-if 20 [EHCI])
Subsystem: Elitegroup Computer Systems Unknown device [1019:2602]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 10
Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.0 PCI bridge [0604]: nVidia Corporation MCP61 PCI bridge [10de:03f3] (rev a1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fdf00000-fdffffff
Prefetchable memory behind bridge: fd800000-fd8fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [b8] Subsystem: nVidia Corporation Unknown device [10de:cb84]
Capabilities: [8c] HyperTransport: MSI Mapping
00:06.0 IDE interface [0101]: nVidia Corporation MCP61 IDE [10de:03ec] (rev a2) (prog-if 8a [Master SecP PriP])
Subsystem: Elitegroup Computer Systems Unknown device [1019:2602]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
Region 4: I/O ports at f000 [size=16]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:08.0 IDE interface [0101]: nVidia Corporation MCP61 SATA Controller [10de:03f6] (rev a2) (prog-if 85 [Master SecO PriO])
Subsystem: Elitegroup Computer Systems Unknown device [1019:2602]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 09f0 [size=8]
Region 1: I/O ports at 0bf0 [size=4]
Region 2: I/O ports at 0970 [size=8]
Region 3: I/O ports at 0b70 [size=4]
Region 4: I/O ports at dc00 [size=16]
Region 5: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [cc] HyperTransport: MSI Mapping
00:09.0 PCI bridge [0604]: nVidia Corporation MCP61 PCI Express bridge [10de:03e8] (rev a2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fde00000-fdefffff
Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Subsystem: nVidia Corporation Unknown device [10de:0000]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Address: 00000000fee0100c Data: 4139
Capabilities: [60] HyperTransport: MSI Mapping
Capabilities: [80] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <64ns, L1 <1us
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0
Link: Latency L0s <512ns, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x16
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
Slot: Number 1, PowerLimit 75.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Off, PwrInd On, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
Capabilities: [100] Virtual Channel
00:0b.0 PCI bridge [0604]: nVidia Corporation MCP61 PCI Express bridge [10de:03e9] (rev a2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fdc00000-fdcfffff
Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Subsystem: nVidia Corporation Unknown device [10de:0000]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Address: 00000000fee0100c Data: 4141
Capabilities: [60] HyperTransport: MSI Mapping
Capabilities: [80] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <64ns, L1 <1us
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1
Link: Latency L0s <512ns, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
Slot: Number 2, PowerLimit 10.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Off, PwrInd On, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
Capabilities: [100] Virtual Channel
00:0c.0 PCI bridge [0604]: nVidia Corporation MCP61 PCI Express bridge [10de:03e9] (rev a2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: fda00000-fdafffff
Prefetchable memory behind bridge: 00000000fd900000-00000000fd9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Subsystem: nVidia Corporation Unknown device [10de:0000]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Address: 00000000fee0100c Data: 4149
Capabilities: [60] HyperTransport: MSI Mapping
Capabilities: [80] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <64ns, L1 <1us
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 2
Link: Latency L0s <512ns, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
Slot: Number 3, PowerLimit 10.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Off, PwrInd On, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
Capabilities: [100] Virtual Channel
00:0d.0 VGA compatible controller [0300]: nVidia Corporation Unknown device [10de:03d1] (rev a2) (prog-if 00 [VGA])
Subsystem: Elitegroup Computer Systems Unknown device [1019:2602]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at 50000000 [disabled] [size=128K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Capabilities: [80] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Revision ID: 1.02
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Capabilities: [f0] #0f [0010]
01:05.0 Ethernet controller [0200]: Intel Corporation 82541PI Gigabit Ethernet Controller [8086:107c] (rev 05)
Subsystem: Intel Corporation PRO/1000 GT Desktop Adapter [8086:1376]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 252 (63750ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fdfe0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fdfc0000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at cc00 [size=64]
[virtual] Expansion ROM at fd800000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [e4] PCI-X non-bridge device
Command: DPERE- ERO+ RBC=512 OST=1
Status: Dev=00:00.0 64bit- 133MHz- SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz-
01:06.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8029(AS) [10ec:8029]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at c800 [size=32]
-- System Information:
Debian Release: 4.0
APT prefers oldstable
APT policy: (500, 'oldstable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.26-1-686
Locale: LANG=de_DE.UTF-8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Versions of packages linux-image-2.6.26-1-686 depends on:
ii debconf [debconf-2.0] 1.5.11etch2 Debian configuration management sy
ii initramfs-tools [linux-initr 0.85i tools for generating an initramfs
ii module-init-tools 3.3-pre4-2 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.26-1-686 recommends:
ii libc6-i686 2.3.6.ds1-13etch9+b1 GNU C Library: Shared libraries [i
-- debconf information:
linux-image-2.6.26-1-686/preinst/abort-overwrite-2.6.26-1-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-686/postinst/bootloader-error-2.6.26-1-686:
linux-image-2.6.26-1-686/postinst/depmod-error-initrd-2.6.26-1-686: false
linux-image-2.6.26-1-686/prerm/removing-running-kernel-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/old-system-map-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/abort-install-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-686/preinst/bootloader-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/prerm/would-invalidate-boot-loader-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/elilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-686/postinst/old-dir-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/create-kimage-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/lilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/old-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/overwriting-modules-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/depmod-error-2.6.26-1-686: false
linux-image-2.6.26-1-686/postinst/bootloader-test-error-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/failed-to-move-modules-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/initrd-2.6.26-1-686:
--- End Message ---