Bug#553441: (ämne saknas)
Getting a similar result using D-link DWA-140 USB wifi-device, using
same chipset rt2870sta.
USB device shows no activitay (ie. blinking LED).
dmesg outputs:
[ 6095.462114] Bulk Out MLME Failed, Status=-2!
[ 6097.386147] Terminate the TimerQThr_pid=2392!
[ 6097.386193] Terminate the MLMEThr_pid=2390!
[ 6097.386216] Terminate the RTUSBCmdThr_pid=2391!
[ 6097.392538] ---> RTMPFreeTxRxRingMemory
[ 6097.392625] <--- ReleaseAdapter
[ 6107.677030] usb 1-7: firmware: requesting rt2870.bin
[ 6107.972110] #
[ 6108.004110] #
[ 6108.036103] #
[ 6108.068100] #
[ 6108.100097] #
[ 6108.132094] #
[ 6108.164092] #
[ 6108.196089] #
[ 6108.228084] #
[ 6108.260082] #
[ 6108.265056] RTUSB_VendorRequest failed(-110),TxFlags=0x0,
ReqType=OUT, Req=0x2, Index=0x400
[ 6108.265062] Request Value=0x0001!
[ 6108.267129] <-- RTMPAllocTxRxRingMemory, Status=0
[ 6108.269205] -->RTUSBVenderReset
[ 6108.269327] <--RTUSBVenderReset
[ 6108.545198] --> Error 2 opening /etc/Wireless/RT2870STA/RT2870STA.dat
[ 6108.545204] 1. Phy Mode = 0
[ 6108.545209] 2. Phy Mode = 0
[ 6108.584429] 3. Phy Mode = 0
[ 6108.588804] MCS Set = 00 00 00 00 00
[ 6108.598556] <==== RTMPInitialize, Status=0
[ 6108.600212] 0x1300 = 00073200
[ 6111.674144] Bulk Out MLME Failed, Status=-2!
[ 6113.682089] Bulk Out MLME Failed, Status=-2!
[ 6115.690158] Bulk Out MLME Failed, Status=-2!
[ 6117.698100] Bulk Out MLME Failed, Status=-2!
[ 6119.464009] ra0: no IPv6 routers present
[ 6119.706166] Bulk Out MLME Failed, Status=-2!
Sys:
Debian sqeeze Official Snapshot i386 kde-CD Binary-1 20091120-01:12
kernel: 2.6.30-2-686
/Erik
Reply to: