Bug#557033: linux-image-2.6.31-1-amd64: Kernel logs WARNING at hpet.c:390.
Subject: linux-image-2.6.31-1-amd64: Kernel logs WARNING at hpet.c:390.
Package: linux-2.6
Version: 2.6.31-1
Severity: normal
*** Please type your report below this line ***
syslog reports WARNING at hpet.c:390.
The system appears to run normally, except for a single message from
GNOME: "Your system had a kernel failure". However, hpet.c:390 is an
invocation
of macro WARN_ON_ONCE, so I wonder if the system might be taking a
performance hit if the fault is actually occurring many times (see below
for more information on this).
The computer is a new Intel core i7-860, Chipset P55, Gigabyte P55UD3p,
nVidia Geforce 9600GT. Two Seagate 1TB disks in mirrored RAID
configuration.
The fault initially occurred in the stable lenny distribution with
kernel 2.6.26.
I installed linux-image-2.6.31-1-amd64 from sid to see if it would go
away. It didn't.
A similar fault in linux-image-2.6.26-1-686 was reported in bug report
512617 in January 2009, and closed in July 2009.
History of my installation: Initially I installed the 32-bit version of
lenny: debian-502-i386-DVD-n.iso. When I booted the system, it wrote
WARNING messages from hpet.c at the rate of megabytes per minute. I then
installed the 64-bit version of lenny: debian-503-amd64-DVD-n.iso.
hpet.c:390 from linux-image-2.6.31-1-amd64 invokes WARN_ON_ONCE, but my
previous experience with the 32-bit distribution makes me believe that
the fault is in fact occurring many times per second, and hence I wonder
if there might be a performance hit.
-- Package-specific info:
** Version:
Linux version 2.6.31-1-amd64 (Debian 2.6.31-1) (waldi@debian.org) (gcc
version 4.3.4 (Debian 4.3.4-5) ) #1 SMP Sat Oct 24 17:50:31 UTC 2009
** Command line:
root=/dev/mapper/isw_ifdfaidbh_Volume05 ro quiet
** Tainted: W (512)
* Taint on warning.
** Kernel log:
[ 5.049081] sdb14 sdb15 >
[ 5.072861] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 5.081135] sd 4:0:0:0: Attached scsi generic sg0 type 0
[ 5.081153] sd 5:0:0:0: Attached scsi generic sg1 type 0
[ 5.081172] sr 7:0:0:0: Attached scsi generic sg2 type 5
[ 5.236070] device-mapper: uevent: version 1.0.3
[ 5.236630] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01)
initialised: dm-devel@redhat.com
[ 5.926876] PM: Starting manual resume from disk
[ 5.950589] kjournald starting. Commit interval 5 seconds
[ 5.950594] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.702415] udevd version 125 started
[ 6.978535] Monitor-Mwait will be used to enter C-1 state
[ 6.978593] Monitor-Mwait will be used to enter C-2 state
[ 6.998699] Monitor-Mwait will be used to enter C-3 state
[ 6.998762] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 6.998794] processor LNXCPU:00: registered as cooling_device0
[ 6.998799] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 6.998857] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 6.998863] ACPI: Power Button [PWRF]
[ 6.999463] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 6.999468] ACPI: Power Button [PWRB]
[ 7.002603] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 7.002624] processor LNXCPU:01: registered as cooling_device1
[ 7.002629] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 7.027097] ACPI: CPU2 (power states: C1[C1] C2[C2] C3[C3])
[ 7.027123] processor LNXCPU:02: registered as cooling_device2
[ 7.027128] ACPI: Processor [CPU2] (supports 8 throttling states)
[ 7.035724] ACPI: CPU3 (power states: C1[C1] C2[C2] C3[C3])
[ 7.035742] processor LNXCPU:03: registered as cooling_device3
[ 7.035744] ACPI: Processor [CPU3] (supports 8 throttling states)
[ 7.036353] ACPI: CPU4 (power states: C1[C1] C2[C2] C3[C3])
[ 7.036375] processor LNXCPU:04: registered as cooling_device4
[ 7.036380] ACPI: Processor [CPU4] (supports 8 throttling states)
[ 7.037120] ACPI: CPU5 (power states: C1[C1] C2[C2] C3[C3])
[ 7.037141] processor LNXCPU:05: registered as cooling_device5
[ 7.037145] ACPI: Processor [CPU5] (supports 8 throttling states)
[ 7.037775] ------------[ cut here ]------------
[ 7.037782] WARNING: at
/home/blank/debian/kernel/release/linux-2.6/linux-2.6-2.6.31/debian/build/source_amd64_none/arch/x86/kernel/hpet.c:390
hpet_next_event+0x52/0x77()
[ 7.037785] Modules linked in: button processor(+) ext3 jbd mbcache
dm_mirror dm_region_hash dm_log dm_mod sg sd_mod crc_t10dif sr_mod cdrom
ide_pci_generic ide_core ata_generic usbhid hid ahci pata_jmicron
8139too r8169 mii libata ehci_hcd scsi_mod uhci_hcd thermal fan
thermal_sys [last unloaded: scsi_wait_scan]
[ 7.037807] Pid: 0, comm: swapper Not tainted 2.6.31-1-amd64 #1
[ 7.037809] Call Trace:
[ 7.037814] [<ffffffff81032983>] ? hpet_next_event+0x52/0x77
[ 7.037818] [<ffffffff8105b3d8>] ? warn_slowpath_common+0x85/0xc8
[ 7.037822] [<ffffffff81032983>] ? hpet_next_event+0x52/0x77
[ 7.037826] [<ffffffff8108441a>] ? tick_dev_program_event+0x41/0xc2
[ 7.037829] [<ffffffff81083c80>] ?
tick_broadcast_oneshot_control+0xac/0x11c
[ 7.037834] [<ffffffff810188d1>] ? read_tsc+0xa/0x20
[ 7.037837] [<ffffffff81083364>] ? tick_notify+0x228/0x396
[ 7.037841] [<ffffffff8107afdb>] ? notifier_call_chain+0x3b/0x75
[ 7.037844] [<ffffffff81082b59>] ? clockevents_notify+0x3f/0xa7
[ 7.037852] [<ffffffffa01b4aa3>] ? acpi_idle_enter_bm+0x18c/0x2cd
[processor]
[ 7.037858] [<ffffffff812b026e>] ? menu_select+0x4f/0xc6
[ 7.037861] [<ffffffff812af1a5>] ? cpuidle_idle_call+0xd2/0x139
[ 7.037866] [<ffffffff8101009c>] ? cpu_idle+0xab/0xec
[ 7.037869] ---[ end trace 1917a4e1e6316ce1 ]---
[ 7.037982] ACPI: CPU6 (power states: C1[C1] C2[C2] C3[C3])
[ 7.038004] processor LNXCPU:06: registered as cooling_device6
[ 7.038008] ACPI: Processor [CPU6] (supports 8 throttling states)
[ 7.038873] ACPI: CPU7 (power states: C1[C1] C2[C2] C3[C3])
[ 7.038898] processor LNXCPU:07: registered as cooling_device7
[ 7.038903] ACPI: Processor [CPU7] (supports 8 throttling states)
[ 7.122137] parport_pc 00:08: reported by Plug and Play ACPI
[ 7.122185] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 7.197021] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 7.282479] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 8.203674] alloc irq_desc for 22 on node 0
[ 8.203676] alloc kstat_irqs on node 0
[ 8.203683] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low)
-> IRQ 22
[ 8.203818] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 9.237210] hda-intel: azx_get_response timeout, switching to polling
mode: last cmd=0x300f0000
[ 10.238531] hda-intel: Codec #3 probe error; disabling it...
[ 10.395179] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input6
[ 11.412062] EXT3 FS on dm-3, internal journal
[ 12.126089] loop: module loaded
[ 13.937336] kjournald starting. Commit interval 5 seconds
[ 13.937716] EXT3 FS on dm-11, internal journal
[ 13.937724] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.965423] kjournald starting. Commit interval 5 seconds
[ 13.965812] EXT3 FS on dm-12, internal journal
[ 13.965819] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.009809] kjournald starting. Commit interval 5 seconds
[ 14.010186] EXT3 FS on dm-13, internal journal
[ 14.010193] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.052662] kjournald starting. Commit interval 5 seconds
[ 14.053028] EXT3 FS on dm-10, internal journal
[ 14.053035] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.084253] kjournald starting. Commit interval 5 seconds
[ 14.084982] EXT3 FS on dm-5, internal journal
[ 14.084989] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.114298] kjournald starting. Commit interval 5 seconds
[ 14.115028] EXT3 FS on dm-4, internal journal
[ 14.115036] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.141717] Adding 15623172k swap on
/dev/mapper/isw_ifdfaidbh_Volume011. Priority:-1 extents:1
across:15623172k
[ 15.250398] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 16.903957] lp0: using parport0 (interrupt-driven).
[ 16.919208] ppdev: user-space parallel port driver
[ 25.472787] eth1: no IPv6 routers present
[ 51.106306] r8169: eth0: link down
[ 51.107683] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 65.832568] eth1: no IPv6 routers present
** Model information
not available
** Loaded modules:
Module Size Used by
ppdev 7720 0
lp 11492 0
acpi_cpufreq 9520 0
cpufreq_stats 5092 0
cpufreq_userspace 3940 0
cpufreq_powersave 1952 0
cpufreq_conservative 8624 0
loop 17404 0
snd_hda_codec_realtek 271908 1
snd_hda_intel 29128 0
snd_hda_codec 83920 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 9288 1 snd_hda_codec
snd_pcm_oss 40832 0
snd_mixer_oss 16528 1 snd_pcm_oss
snd_pcm 89240 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_midi 7536 0
snd_rawmidi 25424 1 snd_seq_midi
snd_seq_midi_event 8752 1 snd_seq_midi
snd_seq 58528 2 snd_seq_midi,snd_seq_midi_event
snd_timer 23888 2 snd_pcm,snd_seq
snd_seq_device 8324 3 snd_seq_midi,snd_rawmidi,snd_seq
i2c_i801 10896 0
i2c_core 26768 1 i2c_i801
snd 71608 11
snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
serio_raw 6564 0
pcspkr 3280 0
soundcore 8816 1 snd
evdev 11504 4
joydev 11872 0
snd_page_alloc 10768 2 snd_hda_intel,snd_pcm
parport_pc 28824 1
parport 41200 3 ppdev,lp,parport_pc
button 7072 0
processor 43164 9 acpi_cpufreq
ext3 133616 7
jbd 53624 1 ext3
mbcache 9524 1 ext3
dm_mirror 15960 1
dm_region_hash 13840 1 dm_mirror
dm_log 11364 3 dm_mirror,dm_region_hash
dm_mod 78248 38 dm_mirror,dm_log
sg 25688 0
sd_mod 37608 2
crc_t10dif 2208 1 sd_mod
sr_mod 17412 0
cdrom 36200 1 sr_mod
ide_pci_generic 5156 0
ide_core 117744 1 ide_pci_generic
ata_generic 6132 0
usbhid 41200 0
hid 43808 1 usbhid
ahci 41552 2
pata_jmicron 4240 0
8139too 26580 0
r8169 36372 0
mii 6144 2 8139too,r8169
libata 191148 3 ata_generic,ahci,pata_jmicron
ehci_hcd 37600 0
scsi_mod 173200 4 sg,sd_mod,sr_mod,libata
uhci_hcd 24048 0
thermal 17376 0
fan 5768 0
thermal_sys 17936 3 processor,thermal,fan
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth1
iface eth1 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast
state DOWN qlen 1000
link/ether 00:24:1d:d2:e6:7b brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UNKNOWN qlen 1000
link/ether 00:e0:29:72:ee:70 brd ff:ff:ff:ff:ff:ff
inet 192.168.0.104/24 brd 192.168.0.255 scope global eth1
inet6 fe80::2e0:29ff:fe72:ee70/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed
multicast|bytes packets errs drop fifo colls carrier compressed
lo: 8744 134 0 0 0 0 0 0
8744 134 0 0 0 0 0 0
eth0: 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
eth1: 2360787 9300 0 0 0 0 0 0
824883 5700 0 0 0 0 0 0
*** Protocol statistics:
Ip:
9466 total packets received
0 forwarded
0 incoming packets discarded
5852 incoming packets delivered
5754 requests sent out
Icmp:
11 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 1
echo requests: 5
echo replies: 5
26 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 16
echo request: 5
echo replies: 5
IcmpMsg:
InType0: 5
InType3: 1
InType8: 5
OutType0: 5
OutType3: 16
OutType8: 5
Tcp:
51 active connections openings
18 passive connection openings
0 failed connection attempts
2 connection resets received
1 connections established
5633 segments received
5532 segments send out
18 segments retransmited
0 bad segments received.
2 resets sent
Udp:
192 packets received
16 packets to unknown port received.
0 packet receive errors
173 packets sent
UdpLite:
TcpExt:
12 TCP sockets finished time wait in fast timer
69 delayed acks sent
88 packets directly queued to recvmsg prequeue.
102817 bytes directly received in process context from prequeue
251 packet headers predicted
61 packets header predicted and directly queued to user
305 acknowledgments not containing data payload received
26 predicted acknowledgments
18 other TCP timeouts
2 connections reset due to early user close
IpExt:
InMcastPkts: 29
OutMcastPkts: 34
InBcastPkts: 88
OutBcastPkts: 47
InOctets: 2247644
OutOctets: 744652
InMcastOctets: 5651
OutMcastOctets: 5851
InBcastOctets: 13585
OutBcastOctets: 6204
*** Device features:
eth0: 0x180
eth1: 0x829
lo: 0x13865
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Clarksfield/Lynnfield DMI
[8086:d131] (rev 11)
Subsystem: Giga-byte Technology Device [1458:5000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:03.0 PCI bridge [0604]: Intel Corporation Clarksfield/Lynnfield PCI
Express Root Port 1 [8086:d138] (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: f6000000-f9ffffff
Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:08.0 System peripheral [0880]: Intel Corporation
Clarksfield/Lynnfield System Management Registers [8086:d155] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:08.1 System peripheral [0880]: Intel Corporation
Clarksfield/Lynnfield Semaphore and Scratchpad Registers [8086:d156]
(rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:08.2 System peripheral [0880]: Intel Corporation
Clarksfield/Lynnfield System Control and Status Registers [8086:d157]
(rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:08.3 System peripheral [0880]: Intel Corporation
Clarksfield/Lynnfield Miscellaneous Registers [8086:d158] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
00:10.0 System peripheral [0880]: Intel Corporation Device [8086:d150]
(rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
00:10.1 System peripheral [0880]: Intel Corporation Device [8086:d151]
(rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
00:1a.0 USB Controller [0c03]: Intel Corporation Ibex Peak USB Universal
Host Controller [8086:3b3b] (rev 05) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at ff00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 USB Controller [0c03]: Intel Corporation Ibex Peak USB Universal
Host Controller [8086:3b3e] (rev 05) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at fe00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.2 USB Controller [0c03]: Intel Corporation Ibex Peak USB Universal
Host Controller [8086:3b3f] (rev 05) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at fd00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 USB Controller [0c03]: Intel Corporation Ibex Peak USB2 Enhanced
Host Controller [8086:3b3c] (rev 05) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Device [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fbfff000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1b.0 Audio device [0403]: Intel Corporation Ibex Peak High Definition
Audio [8086:3b56] (rev 05)
Subsystem: Giga-byte Technology Device [1458:a002]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fbff8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation Ibex Peak PCI Express Root
Port 1 [8086:3b42] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbd00000-fbdfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation Ibex Peak PCI Express Root
Port 2 [8086:3b44] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fbb00000-fbbfffff
Prefetchable memory behind bridge: 00000000fba00000-00000000fbafffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.3 PCI bridge [0604]: Intel Corporation Ibex Peak PCI Express Root
Port 4 [8086:3b48] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fbe00000-fbefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation Ibex Peak USB Universal
Host Controller [8086:3b36] (rev 05) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at fc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation Ibex Peak USB Universal
Host Controller [8086:3b37] (rev 05) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at fb00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation Ibex Peak USB Universal
Host Controller [8086:3b38] (rev 05) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at fa00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.3 USB Controller [0c03]: Intel Corporation Ibex Peak USB Universal
Host Controller [8086:3b39] (rev 05) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at f900 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation Ibex Peak USB2 Enhanced
Host Controller [8086:3b34] (rev 05) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Device [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fbffe000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge
[8086:244e] (rev a5) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fbc00000-fbcfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation Ibex Peak LPC Interface
Controller [8086:3b02] (rev 05)
Subsystem: Giga-byte Technology Device [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 RAID bus controller [0104]: Intel Corporation 82801 SATA RAID
Controller [8086:2822] (rev 05)
Subsystem: Giga-byte Technology Device [1458:b000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 34
Region 0: I/O ports at f800 [size=8]
Region 1: I/O ports at f700 [size=4]
Region 2: I/O ports at f600 [size=8]
Region 3: I/O ports at f500 [size=4]
Region 4: I/O ports at f400 [size=32]
Region 5: Memory at fbffd000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation Ibex Peak SMBus Controller
[8086:3b30] (rev 05)
Subsystem: Giga-byte Technology Device [1458:5001]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fbffc000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
01:00.0 VGA compatible controller [0300]: nVidia Corporation G94
[GeForce 9600 GT] [10de:0622] (rev a1) (prog-if 00 [VGA controller])
Subsystem: XFX Pine Group Inc. Device [1682:238a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 12
Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f6000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at af00 [size=128]
[virtual] Expansion ROM at f9000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel modules: nvidiafb
02:00.0 SATA controller [0106]: JMicron Technologies, Inc. JMicron
20360/20363 AHCI Controller [197b:2363] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Giga-byte Technology Device [1458:b000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 5: Memory at fbdfe000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
02:00.1 IDE interface [0101]: JMicron Technologies, Inc. JMicron
20360/20363 AHCI Controller [197b:2363] (rev 02) (prog-if 85 [Master
SecO PriO])
Subsystem: Giga-byte Technology Device [1458:b000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at ef00 [size=8]
Region 1: I/O ports at ee00 [size=4]
Region 2: I/O ports at ed00 [size=8]
Region 3: I/O ports at ec00 [size=4]
Region 4: I/O ports at eb00 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_jmicron
Kernel modules: ide-pci-generic, ata_generic, pata_jmicron
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
Subsystem: Giga-byte Technology Device [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 33
Region 0: I/O ports at de00 [size=256]
Region 2: Memory at fbaff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at fbaf8000 (64-bit, prefetchable) [size=16K]
[virtual] Expansion ROM at fba00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
04:00.0 SATA controller [0106]: JMicron Technologies, Inc. JMicron
20360/20363 AHCI Controller [197b:2363] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Giga-byte Technology Device [1458:b000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 5: Memory at fbefe000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
04:00.1 IDE interface [0101]: JMicron Technologies, Inc. JMicron
20360/20363 AHCI Controller [197b:2363] (rev 03) (prog-if 85 [Master
SecO PriO])
Subsystem: Giga-byte Technology Device [1458:b000]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 16
Region 0: I/O ports at cf00 [size=8]
Region 1: I/O ports at ce00 [size=4]
Region 2: I/O ports at cd00 [size=8]
Region 3: I/O ports at cc00 [size=4]
Region 4: I/O ports at cb00 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_jmicron
Kernel modules: ide-pci-generic, ata_generic, pata_jmicron
05:04.0 Ethernet controller [0200]: Accton Technology Corporation
SMC2-1211TX [1113:1211] (rev 10)
Subsystem: Accton Technology Corporation EN-1207D Fast Ethernet
Adapter [1113:1211]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at be00 [size=256]
Region 1: Memory at fbcff000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: 8139too
Kernel modules: 8139too
** USB devices:
Bus 009 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 002: ID 046d:c529 Logitech, Inc.
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 5.0.3
APT prefers stable
APT policy: (990, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.31-1-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.31-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration
management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an
initramfs
ii module-init-tools 3.4-1 tools for managing Linux
kernel mo
Versions of packages linux-image-2.6.31-1-amd64 recommends:
ii firmware-linux-free 2.6.31-1 Binary firmware for various
driver
Versions of packages linux-image-2.6.31-1-amd64 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader
(Legacy v
pn linux-doc-2.6.31 <none> (no description available)
Versions of packages linux-image-2.6.31-1-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
-- debconf information:
linux-image-2.6.31-1-amd64/prerm/removing-running-kernel-2.6.31-1-amd64:
true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.31-1-amd64/prerm/would-invalidate-boot-loader-2.6.31-1-amd64:
true
linux-image-2.6.31-1-amd64/postinst/depmod-error-initrd-2.6.31-1-amd64:
false
linux-image-2.6.31-1-amd64/postinst/missing-firmware-2.6.31-1-amd64:
linux-image-2.6.31-1-amd64/postinst/bootloader-test-error-2.6.31-1-amd64:
linux-image-2.6.31-1-amd64/postinst/bootloader-error-2.6.31-1-amd64:
Reply to: