Bug#553638: linux-image-2.6.24-etchnhalf.1-amd64: XFS crash takes filesystem offline
Package: linux-image-2.6.24-etchnhalf.1-amd64
Version: 2.6.24-6~etchnhalf.8etch3
Severity: normal
Please see the XFS crash trace included below. The summary is:
XFS internal error xfs_trans_cancel at line 1163 of file
fs/xfs/xfs_trans.c
I've not logged this to an existing ticket sice it seems to be a class
of bug rather, a symptom, so I don't feel qualified to make that call.
This happens on a fairly regular basis with a 250GB XFS filesystem which
is one of several logical volumes on a 1.36TB LVM volume group. The
underlying device is an Areca hardware RAID card.
When the fs will go offline is not predicatable but it always happens
during reasonably heavy fs activity. This particular crash happened
while I was doing 'cp -a' on a directory containing about 27GB in 812,714 files and 12,833 directories.
Please let me know if I can provide any further information.
I can do limited testing since the server is a production system. I
could possibly upgrade to a newer kernel from say backports.org if
that's a good idea.
Thanks.
Ronny
-- Package-specific info:
** Version:
Linux version 2.6.24-etchnhalf.1-amd64 (Debian 2.6.24-6~etchnhalf.8etch3) (dannf@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Sat Aug 15 20:38:41 UTC 2009
** Command line:
auto BOOT_IMAGE=Linux ro root=900
** Not tainted
** Kernel log:
Ending XFS recovery on filesystem: dm-10 (logdev: internal)
Filesystem "dm-6": Disabling barriers, not supported by the underlying device
XFS mounting filesystem dm-6
Ending clean XFS mount for filesystem: dm-6
Filesystem "dm-16": Disabling barriers, not supported by the underlying device
XFS mounting filesystem dm-16
Ending clean XFS mount for filesystem: dm-16
Filesystem "dm-7": Disabling barriers, not supported by the underlying device
XFS mounting filesystem dm-7
Ending clean XFS mount for filesystem: dm-7
Filesystem "dm-8": Disabling barriers, not supported by the underlying device
XFS mounting filesystem dm-8
Ending clean XFS mount for filesystem: dm-8
Filesystem "dm-17": Disabling barriers, not supported by the underlying device
XFS mounting filesystem dm-17
Ending clean XFS mount for filesystem: dm-17
Filesystem "dm-4": Disabling barriers, not supported by the underlying device
XFS mounting filesystem dm-4
Ending clean XFS mount for filesystem: dm-4
Filesystem "dm-3": Disabling barriers, not supported by the underlying device
XFS mounting filesystem dm-3
Ending clean XFS mount for filesystem: dm-3
Filesystem "dm-15": Disabling barriers, not supported by the underlying device
XFS mounting filesystem dm-15
Ending clean XFS mount for filesystem: dm-15
Filesystem "dm-14": Disabling barriers, not supported by the underlying device
XFS mounting filesystem dm-14
Ending clean XFS mount for filesystem: dm-14
e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
process `syslogd' is using obsolete setsockopt SO_BSDCOMPAT
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
eth0: no IPv6 routers present
Filesystem "dm-20": Disabling barriers, not supported by the underlying device
XFS mounting filesystem dm-20
Starting XFS recovery on filesystem: dm-20 (logdev: internal)
XFS resetting qflags for filesystem dm-20
Ending XFS recovery on filesystem: dm-20 (logdev: internal)
Filesystem "dm-23": Disabling barriers, not supported by the underlying device
XFS mounting filesystem dm-23
Starting XFS recovery on filesystem: dm-23 (logdev: internal)
Ending XFS recovery on filesystem: dm-23 (logdev: internal)
Filesystem "dm-26": Disabling barriers, not supported by the underlying device
XFS mounting filesystem dm-26
Starting XFS recovery on filesystem: dm-26 (logdev: internal)
Ending XFS recovery on filesystem: dm-26 (logdev: internal)
Filesystem "dm-29": Disabling barriers, not supported by the underlying device
XFS mounting filesystem dm-29
XFS resetting qflags for filesystem dm-29
Ending clean XFS mount for filesystem: dm-29
Filesystem "dm-32": Disabling barriers, not supported by the underlying device
XFS mounting filesystem dm-32
Starting XFS recovery on filesystem: dm-32 (logdev: internal)
Ending XFS recovery on filesystem: dm-32 (logdev: internal)
Filesystem "dm-35": Disabling barriers, not supported by the underlying device
XFS mounting filesystem dm-35
Starting XFS recovery on filesystem: dm-35 (logdev: internal)
Ending XFS recovery on filesystem: dm-35 (logdev: internal)
Filesystem "dm-38": Disabling barriers, not supported by the underlying device
XFS mounting filesystem dm-38
XFS resetting qflags for filesystem dm-38
Ending clean XFS mount for filesystem: dm-38
md: data-check of RAID array md0
md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for data-check.
md: using 128k window, over a total of 489856 blocks.
md: delaying data-check of md1 until md0 has finished (they share one or more physical units)
md: delaying data-check of md2 until md1 has finished (they share one or more physical units)
md: delaying data-check of md1 until md0 has finished (they share one or more physical units)
md: md0: data-check done.
md: data-check of RAID array md1
md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for data-check.
md: using 128k window, over a total of 1951808 blocks.
md: delaying data-check of md2 until md1 has finished (they share one or more physical units)
RAID1 conf printout:
--- wd:2 rd:2
disk 0, wo:0, o:1, dev:sdb1
disk 1, wo:0, o:1, dev:sdc1
md: md1: data-check done.
md: data-check of RAID array md2
md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for data-check.
md: using 128k window, over a total of 114776320 blocks.
RAID1 conf printout:
--- wd:2 rd:2
disk 0, wo:0, o:1, dev:sdb2
disk 1, wo:0, o:1, dev:sdc2
md: md2: data-check done.
RAID1 conf printout:
--- wd:2 rd:2
disk 0, wo:0, o:1, dev:sdb3
disk 1, wo:0, o:1, dev:sdc3
** Loaded modules:
Module Size Used by
nfsd 262312 17
auth_rpcgss 53408 1 nfsd
exportfs 9600 1 nfsd
ppdev 13960 0
lp 17604 0
ac 11528 0
battery 20104 0
ipv6 287144 40
nfs 259056 1
lockd 73520 3 nfsd,nfs
nfs_acl 8320 2 nfsd,nfs
sunrpc 201736 15 nfsd,auth_rpcgss,nfs,lockd,nfs_acl
loop 23044 0
e752x_edac 16912 0
iTCO_wdt 17744 0
container 9984 0
serio_raw 12036 0
parport_pc 34984 1
parport 45068 3 ppdev,lp,parport_pc
i2c_i801 14236 0
edac_core 54160 3 e752x_edac
floppy 66920 0
button 14112 0
i2c_core 30080 1 i2c_i801
psmouse 46108 0
shpchp 38684 0
pci_hotplug 35760 1 shpchp
evdev 17152 0
pcspkr 7936 0
sg 42008 0
sr_mod 23076 0
cdrom 39848 1 sr_mod
xfs 497128 16
dm_mirror 27264 0
dm_snapshot 22216 0
dm_mod 68344 36 dm_mirror,dm_snapshot
raid1 27904 3
md_mod 84764 4 raid1
ide_generic 5632 0 [permanent]
ata_generic 13188 0
sd_mod 33792 9
ata_piix 25604 6
sata_mv 28936 0
generic 9860 0 [permanent]
libata 164016 3 ata_generic,ata_piix,sata_mv
arcmsr 28800 14
ide_core 145432 2 ide_generic,generic
e1000 127680 0
uhci_hcd 30368 0
scsi_mod 170808 5 sg,sr_mod,sd_mod,libata,arcmsr
ehci_hcd 39948 0
thermal 22944 0
processor 45416 1 thermal
fan 9992 0
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation E7520 Memory Controller Hub [8086:3590] (rev 0c)
Subsystem: Super Micro Computer Inc Unknown device [15d9:6080]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: <access denied>
00:00.1 Unknown class [ff00]: Intel Corporation E7525/E7520 Error Reporting Registers [8086:3591] (rev 0c)
Subsystem: Super Micro Computer Inc Unknown device [15d9:6080]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:01.0 System peripheral [0880]: Intel Corporation E7520 DMA Controller [8086:3594] (rev 0c)
Subsystem: Super Micro Computer Inc Unknown device [15d9:6080]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 5
Region 0: Memory at dd000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:02.0 PCI bridge [0604]: Intel Corporation E7525/E7520/E7320 PCI Express Port A [8086:3595] (rev 0c) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: dd100000-dd2fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:04.0 PCI bridge [0604]: Intel Corporation E7525/E7520 PCI Express Port B [8086:3597] (rev 0c) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:06.0 PCI bridge [0604]: Intel Corporation E7520 PCI Express Port C [8086:3599] (rev 0c) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=05, subordinate=07, sec-latency=0
Memory behind bridge: dd300000-dd3fffff
Prefetchable memory behind bridge: 00000000df400000-00000000df7fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:1c.0 PCI bridge [0604]: Intel Corporation 6300ESB 64-bit PCI-X Bridge [8086:25ae] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 40, Cache Line Size: 64 bytes
Bus: primary=00, secondary=08, subordinate=08, sec-latency=48
I/O behind bridge: 00003000-00003fff
Memory behind bridge: dd400000-dd4fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort+ >Reset- FastB2B-
Capabilities: <access denied>
00:1d.0 USB Controller [0c03]: Intel Corporation 6300ESB USB Universal Host Controller [8086:25a9] (rev 02) (prog-if 00 [UHCI])
Subsystem: Super Micro Computer Inc Unknown device [15d9:6080]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 1400 [size=32]
00:1d.1 USB Controller [0c03]: Intel Corporation 6300ESB USB Universal Host Controller [8086:25aa] (rev 02) (prog-if 00 [UHCI])
Subsystem: Super Micro Computer Inc Unknown device [15d9:6080]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 1420 [size=32]
00:1d.4 System peripheral [0880]: Intel Corporation 6300ESB Watchdog Timer [8086:25ab] (rev 02)
Subsystem: Super Micro Computer Inc Unknown device [15d9:6080]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Region 0: Memory at dd001000 (32-bit, non-prefetchable) [size=16]
00:1d.5 PIC [0800]: Intel Corporation 6300ESB I/O Advanced Programmable Interrupt Controller [8086:25ac] (rev 02) (prog-if 20 [IO(X)-APIC])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: <access denied>
00:1d.7 USB Controller [0c03]: Intel Corporation 6300ESB USB2 Enhanced Host Controller [8086:25ad] (rev 02) (prog-if 20 [EHCI])
Subsystem: Super Micro Computer Inc Unknown device [15d9:6080]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at dd001400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 0a) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=09, subordinate=09, sec-latency=32
I/O behind bridge: 00004000-00004fff
Memory behind bridge: dd500000-deffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:1f.0 ISA bridge [0601]: Intel Corporation 6300ESB LPC Interface Controller [8086:25a1] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:1f.2 IDE interface [0101]: Intel Corporation 6300ESB SATA Storage Controller [8086:25a3] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Super Micro Computer Inc Unknown device [15d9:6080]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 1470 [size=16]
00:1f.3 SMBus [0c05]: Intel Corporation 6300ESB SMBus Controller [8086:25a4] (rev 02)
Subsystem: Super Micro Computer Inc Unknown device [15d9:6080]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 1100 [size=32]
01:00.0 PCI bridge [0604]: Intel Corporation 6700PXH PCI Express-to-PCI Bridge A [8086:0329] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=01, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 00002000-00002fff
Memory behind bridge: dd200000-dd2fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
01:00.1 PIC [0800]: Intel Corporation 6700/6702PXH I/OxAPIC Interrupt Controller A [8086:0326] (rev 09) (prog-if 20 [IO(X)-APIC])
Subsystem: Super Micro Computer Inc Unknown device [15d9:6080]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at dd100000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
01:00.2 PCI bridge [0604]: Intel Corporation 6700PXH PCI Express-to-PCI Bridge B [8086:032a] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=01, secondary=03, subordinate=03, sec-latency=64
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
01:00.3 PIC [0800]: Intel Corporation 6700PXH I/OxAPIC Interrupt Controller B [8086:0327] (rev 09) (prog-if 20 [IO(X)-APIC])
Subsystem: Super Micro Computer Inc Unknown device [15d9:6080]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at dd101000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
02:03.0 RAID bus controller [0104]: Marvell Technology Group Ltd. MV88SX6081 8-port SATA II PCI-X Controller [11ab:6081] (rev 03)
Subsystem: Super Micro Computer Inc Unknown device [15d9:6080]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 56
Region 0: Memory at dd200000 (64-bit, non-prefetchable) [size=1M]
Region 2: I/O ports at 2000 [size=256]
Capabilities: <access denied>
05:00.0 PCI bridge [0604]: Intel Corporation 80332 [Dobson] I/O processor (A-Segment Bridge) [8086:0330] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=05, secondary=06, subordinate=06, sec-latency=32
Memory behind bridge: dd300000-dd3fffff
Prefetchable memory behind bridge: 00000000df400000-00000000df7fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
05:00.2 PCI bridge [0604]: Intel Corporation 80332 [Dobson] I/O processor (B-Segment Bridge) [8086:0332] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=05, secondary=07, subordinate=07, sec-latency=32
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
06:0e.0 RAID bus controller [0104]: Areca Technology Corp. ARC-1220 8-Port PCI-Express to SATA RAID Controller [17d3:1220]
Subsystem: Areca Technology Corp. ARC-1220 8-Port PCI-Express to SATA RAID Controller [17d3:1220]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 32 (32000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at dd300000 (32-bit, non-prefetchable) [size=4K]
Region 2: Memory at df400000 (32-bit, prefetchable) [size=4M]
[virtual] Expansion ROM at dd310000 [disabled] [size=64K]
Capabilities: <access denied>
08:01.0 Ethernet controller [0200]: Intel Corporation 82541GI/PI Gigabit Ethernet Controller [8086:1076] (rev 05)
Subsystem: Super Micro Computer Inc Unknown device [15d9:1076]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (63750ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 24
Region 0: Memory at dd400000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at 3000 [size=64]
Capabilities: <access denied>
08:02.0 Ethernet controller [0200]: Intel Corporation 82541GI/PI Gigabit Ethernet Controller [8086:1076] (rev 05)
Subsystem: Super Micro Computer Inc Unknown device [15d9:1076]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (63750ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 25
Region 0: Memory at dd420000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at 3040 [size=64]
Capabilities: <access denied>
09:01.0 VGA compatible controller [0300]: ATI Technologies Inc Rage XL [1002:4752] (rev 27) (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc Rage XL [1002:8008]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 66 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at de000000 (32-bit, non-prefetchable) [size=16M]
Region 1: I/O ports at 4000 [size=256]
Region 2: Memory at dd500000 (32-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at dd520000 [disabled] [size=128K]
Capabilities: <access denied>
*** /home/ronny/2009-10-31_vimes_fs_crash_oops.txt
Oct 31 17:41:25 vimes kernel: Filesystem "dm-10": XFS internal error xfs_trans_cancel at line 1163 of file fs/xfs/xfs_trans.c. Caller 0xffffffff8818e897
Oct 31 17:41:25 vimes kernel: Pid: 13670, comm: cp Not tainted 2.6.24-etchnhalf.1-amd64 #1
Oct 31 17:41:25 vimes kernel:
Oct 31 17:41:25 vimes kernel: Call Trace:
Oct 31 17:41:25 vimes kernel: [<ffffffff8818e897>] :xfs:xfs_create+0x442/0x4d2
Oct 31 17:41:25 vimes kernel: [<ffffffff8818770d>] :xfs:xfs_trans_cancel+0x5b/0xf3
Oct 31 17:41:25 vimes kernel: [<ffffffff8818e897>] :xfs:xfs_create+0x442/0x4d2
Oct 31 17:41:25 vimes kernel: [<ffffffff88197fab>] :xfs:xfs_vn_mknod+0x14f/0x249
Oct 31 17:41:25 vimes kernel: [<ffffffff881976ae>] :xfs:xfs_vn_permission+0x15/0x19
Oct 31 17:41:25 vimes kernel: [<ffffffff802a0a24>] vfs_create+0xcf/0x140
Oct 31 17:41:25 vimes kernel: [<ffffffff802a2c51>] open_namei+0x19d/0x644
Oct 31 17:41:25 vimes kernel: [<ffffffff80297147>] do_filp_open+0x1c/0x3d
Oct 31 17:41:25 vimes kernel: [<ffffffff80296e34>] get_unused_fd_flags+0x72/0x11e
Oct 31 17:41:25 vimes kernel: [<ffffffff802971ae>] do_sys_open+0x46/0xc3
Oct 31 17:41:25 vimes kernel: [<ffffffff8020be2e>] system_call+0x7e/0x83
Oct 31 17:41:25 vimes kernel:
Oct 31 17:41:25 vimes kernel: xfs_force_shutdown(dm-10,0x8) called from line 1164 of file fs/xfs/xfs_trans.c. Return address = 0xffffffff88187726
Oct 31 17:41:25 vimes kernel: Filesystem "dm-10": Corruption of in-memory data detected. Shutting down filesystem: dm-10
Oct 31 17:41:25 vimes kernel: Please umount the filesystem, and rectify the problem(s)
-- System Information:
Debian Release: 4.0
APT prefers oldstable
APT policy: (500, 'oldstable')
Architecture: amd64 (x86_64)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.24-etchnhalf.1-amd64
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Versions of packages linux-image-2.6.24-etchnhalf.1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.11etch2 Debian configuration management sy
ii initramfs-tools [linux-initr 0.85i tools for generating an initramfs
ii module-init-tools 3.3-pre4-2 tools for managing Linux kernel mo
linux-image-2.6.24-etchnhalf.1-amd64 recommends no packages.
-- debconf information:
linux-image-2.6.24-etchnhalf.1-amd64/postinst/depmod-error-initrd-2.6.24-etchnhalf.1-amd64: false
linux-image-2.6.24-etchnhalf.1-amd64/postinst/kimage-is-a-directory:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.24-etchnhalf.1-amd64/postinst/old-dir-initrd-link-2.6.24-etchnhalf.1-amd64: true
linux-image-2.6.24-etchnhalf.1-amd64/preinst/lilo-has-ramdisk:
linux-image-2.6.24-etchnhalf.1-amd64/preinst/abort-overwrite-2.6.24-etchnhalf.1-amd64:
linux-image-2.6.24-etchnhalf.1-amd64/preinst/overwriting-modules-2.6.24-etchnhalf.1-amd64: true
linux-image-2.6.24-etchnhalf.1-amd64/preinst/bootloader-initrd-2.6.24-etchnhalf.1-amd64: true
linux-image-2.6.24-etchnhalf.1-amd64/preinst/lilo-initrd-2.6.24-etchnhalf.1-amd64: true
linux-image-2.6.24-etchnhalf.1-amd64/preinst/failed-to-move-modules-2.6.24-etchnhalf.1-amd64:
linux-image-2.6.24-etchnhalf.1-amd64/postinst/bootloader-test-error-2.6.24-etchnhalf.1-amd64:
linux-image-2.6.24-etchnhalf.1-amd64/postinst/create-kimage-link-2.6.24-etchnhalf.1-amd64: true
linux-image-2.6.24-etchnhalf.1-amd64/postinst/depmod-error-2.6.24-etchnhalf.1-amd64: false
linux-image-2.6.24-etchnhalf.1-amd64/preinst/abort-install-2.6.24-etchnhalf.1-amd64:
linux-image-2.6.24-etchnhalf.1-amd64/postinst/old-initrd-link-2.6.24-etchnhalf.1-amd64: true
linux-image-2.6.24-etchnhalf.1-amd64/preinst/initrd-2.6.24-etchnhalf.1-amd64:
linux-image-2.6.24-etchnhalf.1-amd64/preinst/elilo-initrd-2.6.24-etchnhalf.1-amd64: true
linux-image-2.6.24-etchnhalf.1-amd64/postinst/bootloader-error-2.6.24-etchnhalf.1-amd64:
linux-image-2.6.24-etchnhalf.1-amd64/postinst/old-system-map-link-2.6.24-etchnhalf.1-amd64: true
linux-image-2.6.24-etchnhalf.1-amd64/prerm/removing-running-kernel-2.6.24-etchnhalf.1-amd64: true
linux-image-2.6.24-etchnhalf.1-amd64/prerm/would-invalidate-boot-loader-2.6.24-etchnhalf.1-amd64: true
Reply to: