[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#470570: marked as done (linux-image-2.6.24: slab: cache kmem_cache error: free_objects accounting error)

Your message dated Sat, 18 Jul 2009 00:50:40 +0200
with message-id <20090717225040.GA27920@galadriel.inutil.org>
and subject line Re: Bug#470570: linux-image-2.6.24: slab: cache kmem_cache error: free_objects accounting error
has caused the Debian Bug report #470570,
regarding linux-image-2.6.24: slab: cache kmem_cache error: free_objects accounting error
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
470570: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=470570
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: linux-image-2.6.24-1-amd64
Version: 2.6.24-4
Severity: normal
File: linux-image-2.6.24


Subject line basically says it all ... I've just upgraded my otherwise
lenny install to the 2.6.24 kernel in unstable to see if it solved an
unrelated problem.

I got the error

slab: cache kmem_cache error: free_objects accounting error

twice rather soon after booting.

What I'd like to know is, should I be worried? Especially, could there
have been fs corruption or corruption at the md-raid5 layer?

Cheers,

C.


-- Package-specific info:
** Version:
Linux version 2.6.24-1-amd64 (Debian 2.6.24-4) (waldi@debian.org) (gcc version 4.1.3 20080114 (prerelease) (Debian 4.1.2-19)) #1 SMP Mon Feb 11 13:47:43 UTC 2008

** Command line:
root=/dev/mapper/sda2_crypt ro 

** Not tainted

** Kernel log:
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sde] 1953525168 512-byte hardware sectors (1000205 MB)
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sde: unknown partition table
sd 4:0:0:0: [sde] Attached SCSI disk
hda: ATAPI 40X DVD-ROM drive, 256kB Cache
Uniform CD-ROM driver Revision: 3.20
xor: automatically using best checksumming function: generic_sse
   generic_sse:  8929.000 MB/sec
xor: using function: generic_sse (8929.000 MB/sec)
async_tx: api initialized (sync-only)
raid6: int64x1   1900 MB/s
raid6: int64x2   2843 MB/s
raid6: int64x4   3222 MB/s
raid6: int64x8   2244 MB/s
raid6: sse2x1    2933 MB/s
raid6: sse2x2    4166 MB/s
raid6: sse2x4    4942 MB/s
raid6: using algorithm sse2x4 (4942 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: md0 stopped.
md: bind<sdc>
md: bind<sdd>
md: bind<sde>
md: bind<sdb>
raid5: device sdb operational as raid disk 0
raid5: device sde operational as raid disk 3
raid5: device sdd operational as raid disk 2
raid5: device sdc operational as raid disk 1
raid5: allocated 4274kB for md0
raid5: raid level 5 set md0 active with 4 out of 4 devices, algorithm 2
RAID5 conf printout:
 --- rd:4 wd:4
 disk 0, o:1, dev:sdb
 disk 1, o:1, dev:sdc
 disk 2, o:1, dev:sdd
 disk 3, o:1, dev:sde
md0: bitmap initialized from disk: read 1/1 pages, set 0 bits
created bitmap (1 pages) for device md0
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
input: Power Button (FF) as /class/input/input2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: HPC vendor_id 1022 device_id 7460 ss_vid 0 ss_did 0
shpchp: shpc_init: cannot reserve MMIO region
shpchp: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
shpchp: shpc_init: cannot reserve MMIO region
shpchp: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
shpchp: shpc_init: cannot reserve MMIO region
shpchp: HPC vendor_id 1022 device_id 7455 ss_vid 0 ss_did 0
shpchp: shpc_init: cannot reserve MMIO region
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input3
ACPI: Power Button (CM) [PWRB]
AMD768 RNG detected
input: PC Speaker as /class/input/input4
pnp: the driver 'parport_pc' has been registered
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
parport_pc 00:09: driver attached
EXT3 FS on dm-0, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
powernow-k8: Found 2 AMD Opteron(tm) Processor 254 processors (2 cpu cores) (version 2.20.00)
powernow-k8:    0 : fid 0x14 (2800 MHz), vid 0x8
powernow-k8:    1 : fid 0x12 (2600 MHz), vid 0x8
powernow-k8:    2 : fid 0x10 (2400 MHz), vid 0xa
powernow-k8:    3 : fid 0xe (2200 MHz), vid 0xc
powernow-k8:    4 : fid 0xc (2000 MHz), vid 0xe
powernow-k8:    5 : fid 0xa (1800 MHz), vid 0x10
powernow-k8:    6 : fid 0x2 (1000 MHz), vid 0x12
powernow-k8:    0 : fid 0x14 (2800 MHz), vid 0x6
powernow-k8:    1 : fid 0x12 (2600 MHz), vid 0x8
powernow-k8:    2 : fid 0x10 (2400 MHz), vid 0xa
powernow-k8:    3 : fid 0xe (2200 MHz), vid 0xc
powernow-k8:    4 : fid 0xc (2000 MHz), vid 0xe
powernow-k8:    5 : fid 0xa (1800 MHz), vid 0x10
powernow-k8:    6 : fid 0x2 (1000 MHz), vid 0x12
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3: eth0: Link is up at 1000 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
slab: cache kmem_cache error: free_objects accounting error
slab: cache kmem_cache error: free_objects accounting error
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.

** Loaded modules:
Module                  Size  Used by
xts                     8704  0 
gf128mul               13184  1 xts
twofish_x86_64         10496  0 
twofish_common         42240  1 twofish_x86_64
binfmt_misc            17292  1 
crc32c                  6528  0 
libcrc32c               7296  1 crc32c
ac                     11400  0 
battery                19976  0 
ipv6                  286248  20 
powernow_k8            18464  0 
cpufreq_userspace       9604  0 
cpufreq_stats          10528  0 
cpufreq_conservative    13320  0 
cpufreq_ondemand       13712  0 
freq_table              9728  3 powernow_k8,cpufreq_stats,cpufreq_ondemand
cpufreq_powersave       6272  0 
parport_pc             42408  0 
parport                44812  1 parport_pc
pcspkr                  7808  0 
k8temp                 10496  0 
amd_rng                 7560  0 
i2c_amd756             11396  0 
shpchp                 38428  0 
pci_hotplug            35504  1 shpchp
button                 13984  0 
i2c_amd8111            10624  0 
i2c_core               29824  2 i2c_amd756,i2c_amd8111
evdev                  17024  0 
ext3                  139024  3 
jbd                    55976  1 ext3
mbcache                13952  1 ext3
sha256_generic         13312  0 
cbc                     9088  2 
blkcipher              11780  2 xts,cbc
dm_crypt               18568  1 
dm_mod                 67832  5 dm_crypt
raid456               128544  1 
md_mod                 84380  2 raid456
async_xor               7424  1 raid456
async_memcpy            6528  1 raid456
async_tx                7168  1 raid456
xor                    10128  2 raid456,async_xor
ide_cd                 44704  0 
cdrom                  39464  1 ide_cd
generic                 9732  0 [permanent]
sd_mod                 33408  7 
amd74xx                14360  0 [permanent]
ide_core              144920  3 ide_cd,generic,amd74xx
floppy                 66664  0 
sata_sil24             22404  4 
ata_generic            13060  0 
tg3                   100612  0 
libata                162736  2 sata_sil24,ata_generic
firewire_ohci          24192  0 
firewire_core          49472  1 firewire_ohci
crc_itu_t               6656  1 firewire_core
ohci_hcd               28164  0 
thermal                22688  0 
processor              45032  2 powernow_k8,thermal
fan                     9864  0 
aes_x86_64             29992  4 
aic7xxx               163292  2 
scsi_transport_spi     31488  1 aic7xxx
scsi_mod              170296  4 sd_mod,libata,aic7xxx,scsi_transport_spi

** PCI devices:
00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-8111 PCI [1022:7460] (rev 07) (prog-if 00 [Normal decode])
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
	Memory behind bridge: fc500000-fc5fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel modules: shpchp

00:07.0 ISA bridge [0601]: Advanced Micro Devices [AMD] AMD-8111 LPC [1022:7468] (rev 05)
	Subsystem: Advanced Micro Devices [AMD] AMD-8111 LPC [1022:7468]
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:07.1 IDE interface [0101]: Advanced Micro Devices [AMD] AMD-8111 IDE [1022:7469] (rev 03) (prog-if 8a [Master SecP PriP])
	Subsystem: Advanced Micro Devices [AMD] AMD-8111 IDE [1022:7469]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32
	Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
	Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
	Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
	Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
	Region 4: I/O ports at ffa0 [size=16]
	Kernel driver in use: AMD_IDE
	Kernel modules: ata_generic, amd74xx, generic

00:07.2 SMBus [0c05]: Advanced Micro Devices [AMD] AMD-8111 SMBus 2.0 [1022:746a] (rev 02)
	Subsystem: Advanced Micro Devices [AMD] AMD-8111 SMBus 2.0 [1022:746a]
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin D routed to IRQ 9
	Region 0: I/O ports at cc00 [size=32]
	Kernel driver in use: amd8111_smbus2
	Kernel modules: i2c-amd8111

00:07.3 Bridge [0680]: Advanced Micro Devices [AMD] AMD-8111 ACPI [1022:746b] (rev 05)
	Subsystem: Advanced Micro Devices [AMD] AMD-8111 ACPI [1022:746b]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Kernel driver in use: amd756_smbus
	Kernel modules: amd-rng, i2c-amd756

00:0a.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge [1022:7450] (rev 12) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
	I/O behind bridge: 0000a000-0000afff
	Memory behind bridge: fc600000-fc6fffff
	Prefetchable memory behind bridge: 00000000ec100000-00000000ec1fffff
	Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity+ SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel modules: shpchp

00:0a.1 PIC [0800]: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC [1022:7451] (rev 01) (prog-if 10 [IO-APIC])
	Subsystem: Advanced Micro Devices [AMD] Unknown device [1022:36c0]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Region 0: Memory at fc9ff000 (64-bit, non-prefetchable) [size=4K]

00:0b.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge [1022:7450] (rev 12) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
	I/O behind bridge: 0000b000-0000bfff
	Memory behind bridge: fc700000-fc8fffff
	Prefetchable memory behind bridge: 00000000ec200000-00000000ec2fffff
	Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity+ SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel modules: shpchp

00:0b.1 PIC [0800]: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC [1022:7451] (rev 01) (prog-if 10 [IO-APIC])
	Subsystem: Advanced Micro Devices [AMD] Unknown device [1022:36c0]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Region 0: Memory at fc9fe000 (64-bit, non-prefetchable) [size=4K]

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Kernel driver in use: k8temp
	Kernel modules: k8temp

00:19.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>

00:19.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:19.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:19.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Kernel driver in use: k8temp
	Kernel modules: k8temp

01:00.0 USB Controller [0c03]: Advanced Micro Devices [AMD] AMD-8111 USB [1022:7464] (rev 0b) (prog-if 10 [OHCI])
	Subsystem: Advanced Micro Devices [AMD] AMD-8111 USB [1022:7464]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (20000ns max)
	Interrupt: pin D routed to IRQ 19
	Region 0: Memory at fc5fe000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci_hcd
	Kernel modules: ohci-hcd

01:00.1 USB Controller [0c03]: Advanced Micro Devices [AMD] AMD-8111 USB [1022:7464] (rev 0b) (prog-if 10 [OHCI])
	Subsystem: Advanced Micro Devices [AMD] AMD-8111 USB [1022:7464]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (20000ns max)
	Interrupt: pin D routed to IRQ 19
	Region 0: Memory at fc5ff000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci_hcd
	Kernel modules: ohci-hcd

01:0c.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] (prog-if 10 [OHCI])
	Subsystem: Tyan Computer Unknown device [10f1:2885]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at fc5fd800 (32-bit, non-prefetchable) [size=2K]
	Region 1: Memory at fc5f8000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: firewire_ohci
	Kernel modules: firewire-ohci

02:08.0 SCSI storage controller [0100]: Adaptec AIC-7892A U160/m [9005:0080] (rev 02)
	Subsystem: Adaptec 29160 Ultra160 SCSI Controller [9005:e2a0]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (10000ns min, 6250ns max), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 27
	BIST result: 00
	Region 0: I/O ports at a800 [disabled] [size=256]
	Region 1: Memory at fc6ff000 (64-bit, non-prefetchable) [size=4K]
	Expansion ROM at fc6c0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: aic7xxx
	Kernel modules: aic7xxx

02:09.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5703X Gigabit Ethernet [14e4:16a7] (rev 02)
	Subsystem: Tyan Computer Unknown device [10f1:2885]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (16000ns min), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 24
	Region 0: Memory at fc680000 (64-bit, non-prefetchable) [size=64K]
	Expansion ROM at fc670000 [disabled] [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: tg3
	Kernel modules: tg3

03:06.0 Mass storage controller [0180]: Silicon Image, Inc. SiI 3124 PCI-X Serial ATA Controller [1095:3124] (rev 02)
	Subsystem: Silicon Image, Inc. SiI 3124 PCI-X Serial ATA Controller [1095:3124]
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Interrupt: pin A routed to IRQ 29
	Region 0: Memory at fc8fec00 (64-bit, non-prefetchable) [size=128]
	Region 2: Memory at fc8f0000 (64-bit, non-prefetchable) [size=32K]
	Region 4: I/O ports at bc00 [size=16]
	Expansion ROM at fc800000 [disabled] [size=512K]
	Capabilities: <access denied>
	Kernel driver in use: sata_sil24
	Kernel modules: sata_sil24

04:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] AMD-8151 System Controller [1022:7454] (rev 13)
	Subsystem: Advanced Micro Devices [AMD] AMD-8151 System Controller [1022:7454]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Region 0: Memory at <ignored> (32-bit, prefetchable)
	Capabilities: <access denied>
	Kernel driver in use: agpgart-amd64

04:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-8151 AGP Bridge [1022:7455] (rev 13) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Bus: primary=04, secondary=05, subordinate=05, sec-latency=64
	Memory behind bridge: fca00000-feafffff
	Prefetchable memory behind bridge: ec400000-f43fffff
	Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Kernel modules: shpchp

05:00.0 VGA compatible controller [0300]: nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] [10de:0181] (rev a2) (prog-if 00 [VGA controller])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (1250ns min, 250ns max)
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at f0000000 (32-bit, prefetchable) [size=64M]
	Expansion ROM at feae0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel modules: nvidiafb



-- System Information:
Debian Release: lenny/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.24-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=de_AT.UTF-8, LC_CTYPE=de_AT.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.24-1-amd64 depends on:
ii  debconf [debconf-2.0]        1.5.19      Debian configuration management sy
ii  initramfs-tools [linux-initr 0.91e       tools for generating an initramfs
ii  module-init-tools            3.3-pre11-4 tools for managing Linux kernel mo

linux-image-2.6.24-1-amd64 recommends no packages.

-- debconf information:
  shared/kernel-image/really-run-bootloader: true
  linux-image-2.6.24-1-amd64/preinst/abort-overwrite-2.6.24-1-amd64:
  linux-image-2.6.24-1-amd64/postinst/old-dir-initrd-link-2.6.24-1-amd64: true
  linux-image-2.6.24-1-amd64/preinst/failed-to-move-modules-2.6.24-1-amd64:
  linux-image-2.6.24-1-amd64/postinst/bootloader-test-error-2.6.24-1-amd64:
  linux-image-2.6.24-1-amd64/preinst/lilo-initrd-2.6.24-1-amd64: true
  linux-image-2.6.24-1-amd64/postinst/create-kimage-link-2.6.24-1-amd64: true
  linux-image-2.6.24-1-amd64/postinst/depmod-error-initrd-2.6.24-1-amd64: false
  linux-image-2.6.24-1-amd64/postinst/old-system-map-link-2.6.24-1-amd64: true
  linux-image-2.6.24-1-amd64/preinst/lilo-has-ramdisk:
  linux-image-2.6.24-1-amd64/preinst/overwriting-modules-2.6.24-1-amd64: true
  linux-image-2.6.24-1-amd64/postinst/bootloader-error-2.6.24-1-amd64:
  linux-image-2.6.24-1-amd64/preinst/abort-install-2.6.24-1-amd64:
  linux-image-2.6.24-1-amd64/postinst/old-initrd-link-2.6.24-1-amd64: true
  linux-image-2.6.24-1-amd64/postinst/kimage-is-a-directory:
  linux-image-2.6.24-1-amd64/preinst/bootloader-initrd-2.6.24-1-amd64: true
  linux-image-2.6.24-1-amd64/prerm/would-invalidate-boot-loader-2.6.24-1-amd64: true
  linux-image-2.6.24-1-amd64/preinst/initrd-2.6.24-1-amd64:
  linux-image-2.6.24-1-amd64/prerm/removing-running-kernel-2.6.24-1-amd64: true
  linux-image-2.6.24-1-amd64/preinst/elilo-initrd-2.6.24-1-amd64: true
  linux-image-2.6.24-1-amd64/postinst/depmod-error-2.6.24-1-amd64: false

--- End Message ---
--- Begin Message --- 
On Sun, Dec 21, 2008 at 12:28:35AM +0100, Moritz Muehlenhoff wrote:
> On Wed, Mar 12, 2008 at 08:47:37PM +0100, Christian Pernegger wrote:
> > >  > slab: cache kmem_cache error: free_objects accounting error
> > >  >
> > >  > twice rather soon after booting.
> > >  >
> > >  > What I'd like to know is, should I be worried? Especially, could there
> > >  > have been fs corruption or corruption at the md-raid5 layer?
> > >
> > >  Is this something you see on every reboot?
> > 
> > Apparently not. It's happened once (yet), though admittedly I only
> > rebooted 3 times since then.
> > 
> > The box is due some new disks, I'll be keeping a close eye on dmesg
> > the next few days, let's see.
> 
> Does this error still occur with more recent kernel versions?

No further feedback, closing the bug.

If anyone reencounters the problem, please reopen this bug.

Cheers,
        Moritz

--- End Message ---
Reply to: