--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: [linux-image-2.6.25-2-amd64] can't use intel 4965 wireless
- From: taipan@omnidatagrup.ro
- Date: Tue, 29 Jul 2008 15:41:12 +0300 (EEST)
- Message-id: <27962.79.117.221.3.1217335272.squirrel@omnidatagrup.ro>
Package: linux-image-2.6.25-2-amd64
Severity: important
--- Please enter the report below this line. ---
[ 27.687230] iwl4965: Radio Frequency Kill Switch is On:
[ 27.687234] Kill switch must be turned off for wireless networking to
work.
[ 28.064564] iwl4965: WARNING: Requesting MAC access during RFKILL wakes up
NIC
[ 28.069807] iwl4965: WARNING: Requesting MAC access during RFKILL wakes up
NIC
[ 28.077775] iwl4965: WARNING: Requesting MAC access during RFKILL wakes up
NIC
[ 28.085791] iwl4965: WARNING: Requesting MAC access during RFKILL wakes up
NIC
[ 28.093787] iwl4965: WARNING: Requesting MAC access during RFKILL wakes up
NIC
[ 28.101793] iwl4965: WARNING: Requesting MAC access during RFKILL wakes up
NIC
[ 28.109786] iwl4965: WARNING: Requesting MAC access during RFKILL wakes up
NIC
[ 28.117788] iwl4965: WARNING: Requesting MAC access during RFKILL wakes up
NIC
[ 28.125777] iwl4965: WARNING: Requesting MAC access during RFKILL wakes up
NIC
[ 28.133776] iwl4965: WARNING: Requesting MAC access during RFKILL wakes up
NIC
[ 28.141791] iwl4965: WARNING: Requesting MAC access during RFKILL wakes up
NIC
[ 28.149789] iwl4965: WARNING: Requesting MAC access during RFKILL wakes up
NIC
[ 28.157777] iwl4965: WARNING: Requesting MAC access during RFKILL wakes up
NIC
[ 28.165793] iwl4965: WARNING: Requesting MAC access during RFKILL wakes up
NIC
[ 28.173778] iwl4965: WARNING: Requesting MAC access during RFKILL wakes up
NIC
[ 28.181848] iwl4965: WARNING: Requesting MAC access during RFKILL wakes up
NIC
[ 28.189843] iwl4965: WARNING: Requesting MAC access during RFKILL wakes up
NIC
[ 28.197798] iwl4965: WARNING: Requesting MAC access during RFKILL wakes up
NIC
[ 28.205832] iwl4965: WARNING: Requesting MAC access during RFKILL wakes up
NIC
[ 28.213971] ACPI: PCI interrupt for device 0000:07:00.0 disabled
On kde4 live from suse
(http://home.kde.org/~binner/kde-four-live/KDE-Four-Live.i686-1.1.0.iso)
it's working fine.
--- System information. ---
Architecture: amd64
Kernel: Linux 2.6.25-2-amd64
Debian Release: lenny/sid
500 unstable www.debian-multimedia.org
500 unstable ftp.debian.org
500 experimental www.debian-multimedia.org
1 experimental ftp.debian.org
--- Package information. ---
Depends (Version) | Installed
========================================-+-================
module-init-tools | 3.4-1
initramfs-tools (>= 0.55) | 0.92e
OR yaird (>= 0.0.12-25) |
OR linux-initramfs-tool |
--- Output from package bug script ---
** Version:
Linux version 2.6.25-2-amd64 (Debian 2.6.25-7) (maks@debian.org) (gcc
version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Mon Jul 14
11:05:23 UTC 2008
** Command line:
root=UUID=32f8bddd-0d04-4da4-934b-0a1842784213 ro quiet
** Tainted: P (1)
** Kernel log:
0.269242] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6
ACPI/GPIO/TCO
[ 0.269245] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 0.270223] PCI: Transparent bridge - 0000:00:1e.0
[ 0.270261] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.270450] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.270593] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.270718] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.270854] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.270973] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 0.271082] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.271191] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.290719] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12)
[ 0.290874] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 10 12)
[ 0.291028] ACPI: PCI Interrupt Link [LNKC] (IRQs *6)
[ 0.291181] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 12)
[ 0.291334] ACPI: PCI Interrupt Link [LNKE] (IRQs *6)
[ 0.291487] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 12)
[ 0.291643] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 12)
[ 0.291799] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 12)
[ 0.294654] ACPI Warning (tbutils-0217): Incorrect checksum in table
[ATKG] - 1A, should be 59 [20070126]
[ 0.294664] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.294687] pnp: PnP ACPI init
[ 0.294693] ACPI: bus type pnp registered
[ 0.294865] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03
(active)
[ 0.294876] 00:01: calling quirk 0xffffffff8035ba3a:
quirk_system_pci_resources+0x0/0x173()
[ 0.294917] pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.295006] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.295048] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.295144] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b
(active)
[ 0.295296] pnp 00:05: Plug and Play ACPI device, IDs SYN0a0f SYN0a00
SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[ 0.295336] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.295377] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.295585] 00:08: calling quirk 0xffffffff8035ba3a:
quirk_system_pci_resources+0x0/0x173()
[ 0.295625] pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.295825] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.295927] 00:0a: calling quirk 0xffffffff8035ba3a:
quirk_system_pci_resources+0x0/0x173()
[ 0.295967] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.296259] pnp 00:0b: Plug and Play ACPI device, IDs ITE8708 (disabled)
[ 0.296414] pnp 00:0c: Plug and Play ACPI device, IDs IFX0102 PNP0c31
(active)
[ 0.296497] 00:0d: calling quirk 0xffffffff8035ba3a:
quirk_system_pci_resources+0x0/0x173()
[ 0.296537] pnp 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.297063] 00:0e: calling quirk 0xffffffff8035ba3a:
quirk_system_pci_resources+0x0/0x173()
[ 0.297108] pnp 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.297528] pnp: PnP ACPI: found 15 devices
[ 0.297529] ACPI: ACPI bus type pnp unregistered
[ 0.297676] usbcore: registered new interface driver usbfs
[ 0.297720] usbcore: registered new interface driver hub
[ 0.297754] usbcore: registered new device driver usb
[ 0.297861] PCI: Using ACPI for IRQ routing
[ 0.297863] PCI: If a device doesn't work, try "pci=routeirq". If it
helps, post a report
[ 0.316043] PCI-GART: No AMD northbridge found.
[ 0.316048] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.316050] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.317079] ACPI: RTC can wake from S4
[ 0.332038] pnp: the driver 'system' has been registered
[ 0.332046] system 00:01: iomem range 0xfed14000-0xfed19fff has been
reserved
[ 0.332047] system 00:01: driver attached
[ 0.332053] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.332055] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.332057] system 00:08: ioport range 0x400-0x41f has been reserved
[ 0.332059] system 00:08: ioport range 0x500-0x53f has been reserved
[ 0.332061] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been
reserved
[ 0.332063] system 00:08: iomem range 0xfed20000-0xfed3ffff has been
reserved
[ 0.332065] system 00:08: iomem range 0xfed45000-0xfed89fff has been
reserved
[ 0.332068] system 00:08: iomem range 0xffb00000-0xffbfffff has been
reserved
[ 0.332070] system 00:08: iomem range 0xfff00000-0xffffffff could not
be reserved
[ 0.332071] system 00:08: driver attached
[ 0.332075] system 00:0a: ioport range 0x250-0x253 has been reserved
[ 0.332077] system 00:0a: ioport range 0x256-0x25f has been reserved
[ 0.332079] system 00:0a: iomem range 0xfec00000-0xfec00fff has been
reserved
[ 0.332081] system 00:0a: iomem range 0xfee00000-0xfee00fff could not
be reserved
[ 0.332083] system 00:0a: driver attached
[ 0.332088] system 00:0d: iomem range 0xc0000000-0xcfffffff has been
reserved
[ 0.332090] system 00:0d: driver attached
[ 0.332094] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.332096] system 00:0e: iomem range 0xc0000-0xcffff has been reserved
[ 0.332098] system 00:0e: iomem range 0xe0000-0xfffff could not be
reserved
[ 0.332100] system 00:0e: iomem range 0x100000-0xbfffffff could not be
reserved
[ 0.332102] system 00:0e: iomem range 0x0-0x0 could not be reserved
[ 0.332103] system 00:0e: driver attached
[ 0.332445] PCI: Bridge: 0000:00:01.0
[ 0.332447] IO window: 7000-9fff
[ 0.332450] MEM window: 0xfde00000-0xfdefffff
[ 0.332453] PREFETCH window: 0x00000000dbd00000-0x00000000fbcfffff
[ 0.332456] PCI: Bridge: 0000:00:1c.0
[ 0.332458] IO window: a000-afff
[ 0.332462] MEM window: 0xfdf00000-0xfdffffff
[ 0.332465] PREFETCH window: disabled.
[ 0.332469] PCI: Bridge: 0000:00:1c.2
[ 0.332471] IO window: b000-bfff
[ 0.332475] MEM window: 0xfe000000-0xfe7fffff
[ 0.332478] PREFETCH window: 0x00000000fbd00000-0x00000000fdcfffff
[ 0.332482] PCI: Bridge: 0000:00:1c.3
[ 0.332483] IO window: disabled.
[ 0.332487] MEM window: disabled.
[ 0.332489] PREFETCH window: disabled.
[ 0.332494] PCI: Bridge: 0000:00:1c.4
[ 0.332496] IO window: c000-cfff
[ 0.332499] MEM window: 0xfe800000-0xfe8fffff
[ 0.332502] PREFETCH window: disabled.
[ 0.332507] PCI: Bridge: 0000:00:1c.5
[ 0.332507] IO window: disabled.
[ 0.332511] MEM window: 0xfe900000-0xfe9fffff
[ 0.332514] PREFETCH window: disabled.
[ 0.332519] PCI: Bridge: 0000:00:1e.0
[ 0.332520] IO window: disabled.
[ 0.332523] MEM window: 0xfea00000-0xfeafffff
[ 0.332526] PREFETCH window: disabled.
[ 0.332539] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low)
-> IRQ 16
[ 0.332543] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.332557] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low)
-> IRQ 16
[ 0.332560] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.332575] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low)
-> IRQ 18
[ 0.332579] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 0.332593] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low)
-> IRQ 19
[ 0.332597] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 0.332611] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low)
-> IRQ 16
[ 0.332615] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 0.332629] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low)
-> IRQ 17
[ 0.332633] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 0.332642] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.332663] NET: Registered protocol family 2
[ 0.368149] IP route cache hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.369147] TCP established hash table entries: 524288 (order: 11,
8388608 bytes)
[ 0.373226] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.373769] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.373772] TCP reno registered
[ 0.388217] checking if image is initramfs...<6>Clockevents: could not
switch to one-shot mode:<6>Clockevents: could not switch to one-shot mode:
lapic is not functional.
[ 0.264038] Could not switch to high resolution mode on CPU 1
[ 0.504053] lapic is not functional.
[ 0.504054] Could not switch to high resolution mode on CPU 0
[ 0.627326] it is
[ 0.881391] Freeing initrd memory: 7109k freed
[ 0.884519] Simple Boot Flag at 0x52 set to 0x1
[ 0.645214] audit: initializing netlink socket (disabled)
[ 0.645231] type=2000 audit(1217326729.884:1): initialized
[ 0.645554] Total HugeTLB memory allocated, 0
[ 0.645634] VFS: Disk quotas dquot_6.5.1
[ 0.645655] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.645732] io scheduler noop registered
[ 0.645733] io scheduler anticipatory registered
[ 0.645735] io scheduler deadline registered
[ 0.645744] io scheduler cfq registered (default)
[ 0.664141] pci 0000:01:00.0: Boot video device
[ 0.664227] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.664252] assign_interrupt_mode Found MSI capability
[ 0.664275] Allocate Port Service[0000:00:01.0:pcie00]
[ 0.664304] Allocate Port Service[0000:00:01.0:pcie02]
[ 0.664366] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.664392] assign_interrupt_mode Found MSI capability
[ 0.664420] Allocate Port Service[0000:00:1c.0:pcie00]
[ 0.664447] Allocate Port Service[0000:00:1c.0:pcie02]
[ 0.664515] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 0.664542] assign_interrupt_mode Found MSI capability
[ 0.664569] Allocate Port Service[0000:00:1c.2:pcie00]
[ 0.664595] Allocate Port Service[0000:00:1c.2:pcie02]
[ 0.664663] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 0.664690] assign_interrupt_mode Found MSI capability
[ 0.664718] Allocate Port Service[0000:00:1c.3:pcie00]
[ 0.664745] Allocate Port Service[0000:00:1c.3:pcie02]
[ 0.664812] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 0.664838] assign_interrupt_mode Found MSI capability
[ 0.664866] Allocate Port Service[0000:00:1c.4:pcie00]
[ 0.664893] Allocate Port Service[0000:00:1c.4:pcie02]
[ 0.664961] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 0.664986] assign_interrupt_mode Found MSI capability
[ 0.665014] Allocate Port Service[0000:00:1c.5:pcie00]
[ 0.667035] Real Time Clock Driver v1.12ac
[ 0.667207] hpet_resources: 0xfed00000 is busy
[ 0.667262] Linux agpgart interface v0.103
[ 0.667264] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing enabled
[ 0.667476] pnp: the driver 'serial' has been registered
[ 0.668324] brd: module loaded
[ 0.668372] input: Macintosh mouse button emulation as /class/input/input0
[ 0.668444] pnp: the driver 'i8042 kbd' has been registered
[ 0.668452] i8042 kbd 00:04: driver attached
[ 0.668475] pnp: the driver 'i8042 aux' has been registered
[ 0.668485] i8042 aux 00:05: driver attached
[ 0.668512] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at
0x60,0x64 irq 1,12
[ 0.672060] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.673058] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.673061] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.673063] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.673065] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.673066] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.688112] mice: PS/2 mouse device common for all mice
[ 0.688141] cpuidle: using governor ladder
[ 0.688142] cpuidle: using governor menu
[ 0.688421] TCP cubic registered
[ 0.688431] NET: Registered protocol family 1
[ 0.688439] NET: Registered protocol family 17
[ 0.688528] registered taskstats version 1
[ 0.688641] Freeing unused kernel memory: 372k freed
[ 0.724145] input: AT Translated Set 2 keyboard as /class/input/input1
[ 0.986890] ACPI: SSDT BFFC96D0, 02C8 (r1 PmRef Cpu0Ist 3000 INTL
20051117)
[ 0.987307] ACPI: SSDT BFFC9A30, 0712 (r1 PmRef Cpu0Cst 3001 INTL
20051117)
[ 0.988194] Monitor-Mwait will be used to enter C-1 state
[ 0.988196] Monitor-Mwait will be used to enter C-2 state
[ 0.988499] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 0.988531] ACPI: ACPI0007:00 is registered as cooling_device0
[ 0.988533] ACPI: Processor [P001] (supports 8 throttling states)
[ 0.988840] ACPI: SSDT BFFC9600, 00C8 (r1 PmRef Cpu1Ist 3000 INTL
20051117)
[ 0.989104] ACPI: SSDT BFFC99A0, 0085 (r1 PmRef Cpu1Cst 3000 INTL
20051117)
[ 0.750153] ACPI: CPU1 (power states: C1[C1] C2[C2])
[ 0.750181] ACPI: ACPI0007:01 is registered as cooling_device1
[ 0.750184] ACPI: Processor [P002] (supports 8 throttling states)
[ 0.769656] ACPI: EC: non-query interrupt received, switching to
interrupt mode
[ 1.127030] ACPI: LNXTHERM:01 is registered as thermal_zone0
[ 1.128513] ACPI: Thermal Zone [THRM] (59 C)
[ 0.983862] USB Universal Host Controller Interface driver v3.0
[ 0.983899] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low)
-> IRQ 16
[ 0.983908] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 0.983911] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.984039] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus
number 1
[ 0.984067] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e080
[ 0.984194] usb usb1: configuration #1 chosen from 1 choice
[ 0.984213] hub 1-0:1.0: USB hub found
[ 0.984219] hub 1-0:1.0: 2 ports detected
[ 1.074615] No dock devices found.
[ 1.090230] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.090233] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.090235] usb usb1: Product: UHCI Host Controller
[ 1.090236] usb usb1: Manufacturer: Linux 2.6.25-2-amd64 uhci_hcd
[ 1.090238] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.090269] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low)
-> IRQ 21
[ 1.090278] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 1.090281] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.090322] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus
number 2
[ 1.090350] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e000
[ 1.090433] usb usb2: configuration #1 chosen from 1 choice
[ 1.090451] hub 2-0:1.0: USB hub found
[ 1.090457] hub 2-0:1.0: 2 ports detected
[ 1.093087] SCSI subsystem initialized
[ 1.120961] libata version 3.00 loaded.
[ 1.141313] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 1.141316] ricoh-mmc: Copyright(c) Philip Langdale
[ 1.150230] sdhci: Secure Digital Host Controller Interface driver
[ 1.150232] sdhci: Copyright(c) Pierre Ossman
[ 1.196183] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.196186] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.196187] usb usb2: Product: UHCI Host Controller
[ 1.196189] usb usb2: Manufacturer: Linux 2.6.25-2-amd64 uhci_hcd
[ 1.196190] usb usb2: SerialNumber: 0000:00:1a.1
[ 1.436414] ACPI: PCI Interrupt 0000:08:01.0[A] -> GSI 16 (level, low)
-> IRQ 16
[ 1.516113] firewire_ohci: Added fw-ohci device 0000:08:01.0, OHCI
version 1.0
[ 1.276156] sdhci: SDHCI controller found at 0000:08:01.1 [1180:0822]
(rev 22)
[ 1.276168] ACPI: PCI Interrupt 0000:08:01.1[B] -> GSI 17 (level, low)
-> IRQ 17
[ 1.276180] sdhc0:slot0: Will use DMA mode even though HW doesn't fully
claim to support it.
[ 1.276218] mmc0: SDHCI at 0xfeaff400 irq 17 DMA
[ 1.520565] ricoh-mmc: Ricoh MMC controller found at 0000:08:01.2
[1180:0843] (rev 12)
[ 1.520576] ricoh-mmc: Controller is now disabled.
[ 1.521303] Uniform Multi-Platform E-IDE driver
[ 1.521305] ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
[ 1.522309] ICH8M: IDE controller (0x8086:0x2850 rev 0x03) at PCI slot
0000:00:1f.1
[ 1.522315] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low)
-> IRQ 18
[ 1.522322] ICH8M: not 100% native mode: will probe irqs later
[ 1.522327] ICH8M: IDE port disabled
[ 1.522331] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA,
hdb:PIO
[ 1.522338] Probing IDE interface ide0...
[ 1.336109] usb 1-1: new full speed USB device using uhci_hcd and
address 2
[ 1.812247] usb 1-1: configuration #1 chosen from 1 choice
[ 1.816336] usb 1-1: New USB device found, idVendor=0b05, idProduct=1712
[ 1.816338] usb 1-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=3
[ 1.816340] usb 1-1: SerialNumber: 0194E8-5B-0002
[ 1.776165] firewire_core: created device fw0: GUID 001e8c000147009b, S400
[ 2.056147] usb 2-1: new full speed USB device using uhci_hcd and
address 2
[ 1.983503] usb 2-1: configuration #1 chosen from 1 choice
[ 2.226530] usb 2-1: New USB device found, idVendor=08ff, idProduct=1600
[ 2.226532] usb 2-1: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[ 2.226534] usb 2-1: Product: Fingerprint Sensor
[ 2.256355] hda: HL-DT-ST DVDRAM GSA-T20L, ATAPI CD/DVD-ROM drive
[ 2.592188] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 2.592472] hda: UDMA/33 mode selected
[ 2.592903] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 2.355810] ahci 0000:00:1f.2: version 3.0
[ 2.355829] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 20 (level, low)
-> IRQ 20
[ 3.360246] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps
0x7 impl SATA mode
[ 3.360249] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio
slum part
[ 3.360252] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 3.360417] scsi0 : ahci
[ 3.360459] scsi1 : ahci
[ 3.360490] scsi2 : ahci
[ 3.360591] ata1: SATA max UDMA/133 abar m2048@0xfebff800 port
0xfebff900 irq 1273
[ 3.360594] ata2: SATA max UDMA/133 abar m2048@0xfebff800 port
0xfebff980 irq 1273
[ 3.360596] ata3: SATA max UDMA/133 abar m2048@0xfebff800 port
0xfebffa00 irq 1273
[ 3.844265] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.085190] ata1.00: ATA-8: Hitachi HTS545050KTA300, BKFOC60G, max
UDMA/133
[ 4.085193] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 3.846259] ata1.00: configured for UDMA/133
[ 4.396295] ata2: SATA link down (SStatus 0 SControl 300)
[ 4.708314] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.468382] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54505
BKFO PQ: 0 ANSI: 5
[ 4.468444] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low)
-> IRQ 16
[ 5.472381] ahci 0000:06:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps
0x1 impl SATA mode
[ 5.472383] ahci 0000:06:00.0: flags: 64bit ncq pm led clo pmp pio slum
part
[ 5.472388] PCI: Setting latency timer of device 0000:06:00.0 to 64
[ 5.472454] scsi3 : ahci
[ 5.472480] ata4: SATA max UDMA/133 abar m8192@0xfe8fe000 port
0xfe8fe100 irq 16
[ 5.800397] ata4: SATA link down (SStatus 0 SControl 300)
[ 5.801410] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low)
-> IRQ 23
[ 5.801416] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 5.801419] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 5.801463] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 3
[ 5.801488] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000dc00
[ 5.801574] usb usb3: configuration #1 chosen from 1 choice
[ 5.801592] hub 3-0:1.0: USB hub found
[ 5.801599] hub 3-0:1.0: 2 ports detected
[ 6.050059] Driver 'sd' needs updating - please use bus_type methods
[ 6.051018] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors
(500108 MB)
[ 6.051028] sd 0:0:0:0: [sda] Write Protect is off
[ 6.051030] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.051044] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 6.051084] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors
(500108 MB)
[ 6.051092] sd 0:0:0:0: [sda] Write Protect is off
[ 6.051093] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.051106] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 6.051108] sda: sda1 sda2 sda3 sda4
[ 5.859187] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.908457] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.908461] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 5.908462] usb usb3: Product: UHCI Host Controller
[ 5.908464] usb usb3: Manufacturer: Linux 2.6.25-2-amd64 uhci_hcd
[ 5.908465] usb usb3: SerialNumber: 0000:00:1d.0
[ 5.908490] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low)
-> IRQ 19
[ 5.908498] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 5.908501] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 5.908541] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 4
[ 5.908570] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d880
[ 5.908652] usb usb4: configuration #1 chosen from 1 choice
[ 5.908671] hub 4-0:1.0: USB hub found
[ 5.908676] hub 4-0:1.0: 2 ports detected
[ 6.016465] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.016468] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 6.016470] usb usb4: Product: UHCI Host Controller
[ 6.016471] usb usb4: Manufacturer: Linux 2.6.25-2-amd64 uhci_hcd
[ 6.016472] usb usb4: SerialNumber: 0000:00:1d.1
[ 6.016500] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low)
-> IRQ 18
[ 6.016509] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 6.016511] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 6.016555] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 5
[ 6.016583] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
[ 6.016666] usb usb5: configuration #1 chosen from 1 choice
[ 6.016684] hub 5-0:1.0: USB hub found
[ 6.016689] hub 5-0:1.0: 2 ports detected
[ 6.120449] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.120452] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 6.120453] usb usb5: Product: UHCI Host Controller
[ 6.120455] usb usb5: Manufacturer: Linux 2.6.25-2-amd64 uhci_hcd
[ 6.120456] usb usb5: SerialNumber: 0000:00:1d.2
[ 6.360514] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low)
-> IRQ 16
[ 6.360522] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 6.360556] sky2 0000:02:00.0: v1.21 addr 0xfdffc000 irq 16 Yukon-EC
Ultra (0xb4) rev 3
[ 6.360877] sky2 eth0: addr 00:1f:c6:56:d0:21
[ 6.361616] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low)
-> IRQ 18
[ 6.361627] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 6.361630] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 6.361671] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus
number 6
[ 6.365570] ehci_hcd 0000:00:1a.7: debug port 1
[ 6.365575] PCI: cache line size of 32 is not supported by device
0000:00:1a.7
[ 6.365581] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfebff400
[ 6.134786] hda: ATAPI 63X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
[ 6.134791] Uniform CD-ROM driver Revision: 3.20
[ 6.388428] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 6.400424] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver
10 Dec 2004
[ 6.400519] usb usb6: configuration #1 chosen from 1 choice
[ 6.400539] hub 6-0:1.0: USB hub found
[ 6.400546] hub 6-0:1.0: 4 ports detected
[ 6.504493] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.504496] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 6.504498] usb usb6: Product: EHCI Host Controller
[ 6.504499] usb usb6: Manufacturer: Linux 2.6.25-2-amd64 ehci_hcd
[ 6.504501] usb usb6: SerialNumber: 0000:00:1a.7
[ 6.504532] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low)
-> IRQ 23
[ 6.504548] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 6.504551] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 6.504592] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 7
[ 6.508503] ehci_hcd 0000:00:1d.7: debug port 1
[ 6.508508] PCI: cache line size of 32 is not supported by device
0000:00:1d.7
[ 6.508514] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebff000
[ 6.524426] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver
10 Dec 2004
[ 6.524495] usb usb7: configuration #1 chosen from 1 choice
[ 6.524515] hub 7-0:1.0: USB hub found
[ 6.524520] hub 7-0:1.0: 6 ports detected
[ 6.628472] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.628474] usb usb7: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 6.628476] usb usb7: Product: EHCI Host Controller
[ 6.628477] usb usb7: Manufacturer: Linux 2.6.25-2-amd64 ehci_hcd
[ 6.628478] usb usb7: SerialNumber: 0000:00:1d.7
[ 6.431557] PM: Starting manual resume from disk
[ 6.489381] kjournald starting. Commit interval 5 seconds
[ 6.729400] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.684439] usb 3-1: device not accepting address 2, error -71
[ 6.744466] hub 3-0:1.0: unable to enumerate USB device on port 1
[ 7.128475] hub 6-0:1.0: unable to enumerate USB device on port 1
[ 7.380496] hub 6-0:1.0: unable to enumerate USB device on port 3
[ 7.380567] usb 1-1: USB disconnect, address 2
[ 7.632507] usb 1-1: new full speed USB device using uhci_hcd and
address 3
[ 8.109950] udevd version 124 started
[ 7.881732] usb 1-1: configuration #1 chosen from 1 choice
[ 7.885809] usb 1-1: New USB device found, idVendor=0b05, idProduct=1712
[ 7.885812] usb 1-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=3
[ 7.885814] usb 1-1: SerialNumber: 0194E8-5B-0002
[ 7.885829] usb 2-1: USB disconnect, address 2
[ 8.132543] usb 2-1: new full speed USB device using uhci_hcd and
address 3
[ 8.541031] usb 2-1: configuration #1 chosen from 1 choice
[ 8.544028] usb 2-1: New USB device found, idVendor=08ff, idProduct=1600
[ 8.544030] usb 2-1: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[ 8.544032] usb 2-1: Product: Fingerprint Sensor
[ 8.728582] hub 7-0:1.0: unable to enumerate USB device on port 1
[ 8.562438] Asus Laptop ACPI Extras version 0.30
[ 8.566826] unsupported model M70SA, trying default values
[ 8.566828] send /proc/acpi/dsdt to the developers
[ 8.869120] input: Power Button (FF) as /class/input/input2
[ 8.928657] ACPI: Power Button (FF) [PWRF]
[ 8.928738] input: Sleep Button (CM) as /class/input/input3
[ 8.968589] usb 7-6: new high speed USB device using ehci_hcd and
address 3
[ 8.992628] ACPI: Sleep Button (CM) [SLPB]
[ 8.992678] input: Lid Switch as /class/input/input4
[ 8.787306] ACPI: Lid Switch [LID]
[ 8.787460] ACPI: AC Adapter [AC0] (on-line)
[ 9.108107] usb 7-6: configuration #1 chosen from 1 choice
[ 9.108943] usb 7-6: New USB device found, idVendor=174f, idProduct=5a31
[ 9.108945] usb 7-6: New USB device strings: Mfr=2, Product=1,
SerialNumber=3
[ 9.108947] usb 7-6: Product: USB 2.0 Camera
[ 9.108948] usb 7-6: Manufacturer: Sonix Technology Co., Ltd.
[ 9.108950] usb 7-6: SerialNumber: SN0001
[ 9.212004] Bluetooth: Core ver 2.11
[ 9.213703] NET: Registered protocol family 31
[ 9.213704] Bluetooth: HCI device and connection manager initialized
[ 9.213708] Bluetooth: HCI socket layer initialized
[ 9.334072] ACPI: Battery Slot [BAT0] (battery present)
[ 9.348611] usb 3-1: new low speed USB device using uhci_hcd and address 4
[ 9.515485] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 9.515543] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x0860)
[ 9.515570] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 9.516797] usb 3-1: configuration #1 chosen from 1 choice
[ 9.519737] usb 3-1: New USB device found, idVendor=0461, idProduct=4d22
[ 9.519740] usb 3-1: New USB device strings: Mfr=0, Product=2,
SerialNumber=0
[ 9.519741] usb 3-1: Product: USB Optical Mouse
[ 9.340555] input: PC Speaker as /class/input/input5
[ 9.565097] Bluetooth: HCI USB driver ver 2.9
[ 9.567932] usbcore: registered new interface driver hci_usb
[ 9.843960] usbcore: registered new interface driver hiddev
[ 9.856427] pnp: the driver 'tpm_inf_pnp' has been registered
[ 9.856453] tpm_inf_pnp 00:0c: Found TPM with ID IFX0102
[ 9.856495] tpm_inf_pnp 00:0c: TPM found: config base 0x254, data base
0x4700, chip version 0x000b, vendor id 0x15d1 (Infineon), product id
0x000b (SLB 9635 TT 1.2)
[ 9.856729] tpm_inf_pnp 00:0c: driver attached
[ 9.856934] input: USB Optical Mouse as /class/input/input6
[ 9.622151] pnp: the driver 'rtc_cmos' has been registered
[ 9.622168] rtc_cmos 00:03: disabling not supported
[ 9.622172] rtc_cmos: probe of 00:03 failed with error -16
[ 9.912727] input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on
usb-0000:00:1d.0-1
[ 9.912744] usbcore: registered new interface driver usbhid
[ 9.912746] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 9.941059] ACPI: device:06 is registered as cooling_device2
[ 9.941164] input: Video Bus as /class/input/input7
[ 10.004674] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 10.027685] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for
Linux, 1.2.23ks
[ 10.027687] iwl4965: Copyright(c) 2003-2007 Intel Corporation
[ 10.027758] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 17 (level, low)
-> IRQ 17
[ 10.027766] PCI: Setting latency timer of device 0000:07:00.0 to 64
[ 10.027781] iwl4965: Detected Intel Wireless WiFi Link 4965AGN
[ 10.072630] iwl4965: Tunable channels: 13 802.11bg, 19 802.11a channels
[ 10.086381] phy0: Selected rate control algorithm 'iwl-4965-rs'
[ 10.155619] ACPI: PCI interrupt for device 0000:07:00.0 disabled
[ 9.969986] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low)
-> IRQ 22
[ 9.970009] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 10.002498] hda_codec: Unknown model for ALC883, trying auto-probe from
BIOS...
[ 10.093443] ACPI: PCI Interrupt 0000:01:00.1[B] -> GSI 17 (level, low)
-> IRQ 17
[ 10.093461] PCI: Setting latency timer of device 0000:01:00.1 to 64
[ 10.205629] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x280b1, caps:
0xb04713/0x60040d
[ 10.485795] input: SynPS/2 Synaptics TouchPad as /class/input/input8
[ 11.425464] Adding 5871748k swap on /dev/sda4. Priority:-1 extents:1
across:5871748k
[ 12.063838] EXT3 FS on sda3, internal journal
[ 12.535156] loop: module loaded
[ 13.414579] kjournald starting. Commit interval 5 seconds
[ 13.414826] EXT3 FS on sda2, internal journal
[ 13.414830] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.556206] sky2 eth0: enabling interface
[ 16.673823] sky2 eth0: Link is up at 100 Mbps, full duplex, flow
control both
[ 19.245337] NET: Registered protocol family 10
[ 19.245702] lo: Disabled Privacy Extensions
[ 26.875265] Bluetooth: L2CAP ver 2.9
[ 26.875272] Bluetooth: L2CAP socket layer initialized
[ 27.212260] Bluetooth: RFCOMM socket layer initialized
[ 27.212281] Bluetooth: RFCOMM TTY layer initialized
[ 27.212285] Bluetooth: RFCOMM ver 1.8
[ 27.167679] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 17 (level, low)
-> IRQ 17
[ 27.167772] PM: Writing back config space on device 0000:07:00.0 at
offset 1 (was 100102, writing 100106)
[ 27.502954] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 27.687230] iwl4965: Radio Frequency Kill Switch is On:
[ 27.687234] Kill switch must be turned off for wireless networking to
work.
[ 28.064564] iwl4965: WARNING: Requesting MAC access during RFKILL wakes
up NIC
[ 28.069807] iwl4965: WARNING: Requesting MAC access during RFKILL wakes
up NIC
[ 28.077775] iwl4965: WARNING: Requesting MAC access during RFKILL wakes
up NIC
[ 28.085791] iwl4965: WARNING: Requesting MAC access during RFKILL wakes
up NIC
[ 28.093787] iwl4965: WARNING: Requesting MAC access during RFKILL wakes
up NIC
[ 28.101793] iwl4965: WARNING: Requesting MAC access during RFKILL wakes
up NIC
[ 28.109786] iwl4965: WARNING: Requesting MAC access during RFKILL wakes
up NIC
[ 28.117788] iwl4965: WARNING: Requesting MAC access during RFKILL wakes
up NIC
[ 28.125777] iwl4965: WARNING: Requesting MAC access during RFKILL wakes
up NIC
[ 28.133776] iwl4965: WARNING: Requesting MAC access during RFKILL wakes
up NIC
[ 28.141791] iwl4965: WARNING: Requesting MAC access during RFKILL wakes
up NIC
[ 28.149789] iwl4965: WARNING: Requesting MAC access during RFKILL wakes
up NIC
[ 28.157777] iwl4965: WARNING: Requesting MAC access during RFKILL wakes
up NIC
[ 28.165793] iwl4965: WARNING: Requesting MAC access during RFKILL wakes
up NIC
[ 28.173778] iwl4965: WARNING: Requesting MAC access during RFKILL wakes
up NIC
[ 28.181848] iwl4965: WARNING: Requesting MAC access during RFKILL wakes
up NIC
[ 28.189843] iwl4965: WARNING: Requesting MAC access during RFKILL wakes
up NIC
[ 28.197798] iwl4965: WARNING: Requesting MAC access during RFKILL wakes
up NIC
[ 28.205832] iwl4965: WARNING: Requesting MAC access during RFKILL wakes
up NIC
[ 28.213971] ACPI: PCI interrupt for device 0000:07:00.0 disabled
[ 30.156108] fglrx: module license 'Proprietary. (C) 2002 - ATI
Technologies, Starnberg, GERMANY' taints kernel.
[ 30.194953] [fglrx] vendor: 1002 device: 9591 count: 1
[ 30.195283] [fglrx] ioport: bar 1, base 0x9000, size: 0x100
[ 30.195294] [fglrx] Maximum main memory to use for locked dma buffers:
3808 MBytes.
[ 30.197948] [fglrx] PAT is enabled successfully!
[ 30.197997] [fglrx] module loaded - fglrx 8.51.3 [Jul 3 2008] with 1
minors
[ 29.634789] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low)
-> IRQ 16
[ 31.941493] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 31.941497] [fglrx] Reserved FB block: Unshared offset:ff7f000, size:80000
[ 87.280005] sky2 eth0: rx length error: status 0x4660100 length 598
[ 90.192926] sky2 eth0: rx length error: status 0x4660100 length 598
[ 90.834751] sky2 eth0: rx length error: status 0x4660100 length 598
[ 90.593016] sky2 eth0: rx length error: status 0x4660100 length 598
[ 95.474867] CPU0 attaching NULL sched-domain.
[ 95.474878] CPU1 attaching NULL sched-domain.
[ 95.486095] CPU0 attaching sched-domain:
[ 95.486102] domain 0: span 00000003
[ 95.486109] groups: 00000001 00000002
[ 95.486120] domain 1: span 00000003
[ 95.486126] groups: 00000003
[ 95.486134] CPU1 attaching sched-domain:
[ 95.486139] domain 0: span 00000003
[ 95.486145] groups: 00000002 00000001
[ 95.486155] domain 1: span 00000003
[ 95.486161] groups: 00000003
** Loaded modules:
Module Size Used by
vboxdrv 1663024 0
fglrx 2036308 25
rfcomm 46112 0
l2cap 29696 5 rfcomm
ipv6 294120 16
acpi_cpufreq 14096 2
cpufreq_powersave 6272 0
cpufreq_stats 10528 0
cpufreq_userspace 9092 0
cpufreq_conservative 13320 0
cpufreq_ondemand 13712 0
freq_table 9728 3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand
coretemp 13056 0
loop 23044 0
firewire_sbp2 22808 0
joydev 17664 0
snd_hda_intel 414296 2
snd_pcm_oss 46752 0
snd_pcm 88072 2 snd_hda_intel,snd_pcm_oss
snd_mixer_oss 21376 1 snd_pcm_oss
arc4 6528 2
ecb 8192 2
crypto_blkcipher 24324 1 ecb
snd_seq_dummy 8580 0
snd_seq_oss 36736 0
iwl4965 116084 0
snd_seq_midi_event 12544 1 snd_seq_oss
snd_seq 58912 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_timer 29328 2 snd_pcm,snd_seq
snd_seq_device 12948 3 snd_seq_dummy,snd_seq_oss,snd_seq
firmware_class 14976 1 iwl4965
video 27412 0
snd 66888 12
snd_hda_intel,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_seq,snd_timer,snd_seq_device
mac80211 143244 1 iwl4965
rtc_cmos 15544 0
tpm_infineon 14268 0
usbhid 49632 0
hid 44736 1 usbhid
output 8704 1 video
rtc_core 24772 1 rtc_cmos
hci_usb 21148 2
ff_memless 10248 1 usbhid
soundcore 13088 1 snd
psmouse 45724 0
tpm 21824 1 tpm_infineon
tpm_bios 12160 1 tpm
pcspkr 7808 0
rtc_lib 7680 1 rtc_core
iTCO_wdt 17360 0
serio_raw 11652 0
cfg80211 25360 1 mac80211
led_class 10248 0
battery 14208 0
bluetooth 65444 7 rfcomm,l2cap,hci_usb
snd_page_alloc 15120 2 snd_hda_intel,snd_pcm
intel_agp 34160 0
ac 9344 0
button 13856 0
asus_acpi 23596 0
evdev 17408 5
ext3 139408 2
jbd 55336 1 ext3
mbcache 13956 1 ext3
ide_cd_mod 41504 0
cdrom 39464 1 ide_cd_mod
sd_mod 33728 4
ide_pci_generic 9476 0 [permanent]
piix 12808 0 [permanent]
ide_core 138160 3 ide_cd_mod,ide_pci_generic,piix
sdhci 22796 0
ricoh_mmc 8960 0
mmc_core 56416 1 sdhci
firewire_ohci 27908 0
firewire_core 45920 2 firewire_sbp2,firewire_ohci
crc_itu_t 6656 1 firewire_core
ata_generic 13572 0
ahci 36616 3
libata 166064 2 ata_generic,ahci
scsi_mod 170488 3 firewire_sbp2,sd_mod,libata
sky2 53636 0
dock 16288 1 libata
ehci_hcd 40076 0
uhci_hcd 29472 0
thermal 26656 0
processor 49388 4 acpi_cpufreq,thermal
fan 10760 0
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960
Memory Controller Hub [8086:2a00] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:1767]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information <?>
Kernel modules: intel-agp
00:01.0 PCI bridge [0604]: Intel Corporation Mobile PM965/GM965/GL960 PCI
Express Root Port [8086:2a01] (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00007000-00009fff
Memory behind bridge: fde00000-fdefffff
Prefetchable memory behind bridge: 00000000dbd00000-00000000fbcfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [88] Subsystem: Intel Corporation Mobile PM965/GM965/GL960
PCI Express Root Port [8086:2a01]
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable+
Address: fee0300c Data: 4169
Capabilities: [a0] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0
<256ns, L1 <4us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise-
Slot # 10, PowerLimit 75.000000; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB
UHCI Controller #4 [8086:2834] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:1767]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at e080 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB
UHCI Controller #5 [8086:2835] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:1767]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at e000 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2
EHCI Controller #2 [8086:283a] (rev 03) (prog-if 20)
Subsystem: ASUSTeK Computer Inc. Device [1043:1767]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at febff400 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD
Audio Controller [8086:284b] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:1763]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at febf8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0
<64ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive-
BWMgmt- ABWMgmt-
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI
Express Port 1 [8086:283f] (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fdf00000-fdffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1
unlimited
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0
<256ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+
BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 20, PowerLimit 10.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable+
Address: fee0300c Data: 4171
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device [1043:1767]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI
Express Port 3 [8086:2843] (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fe000000-fe7fffff
Prefetchable memory behind bridge: 00000000fbd00000-00000000fdcfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1
unlimited
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us,
L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 22, PowerLimit 25.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable+
Address: fee0300c Data: 4179
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device [1043:1767]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI
Express Port 4 [8086:2845] (rev 03)
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1
unlimited
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us,
L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 23, PowerLimit 25.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable+
Address: fee0300c Data: 4181
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device [1043:1767]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI
Express Port 5 [8086:2847] (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe800000-fe8fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1
unlimited
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #5, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0
<256ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+
BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 25, PowerLimit 10.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable+
Address: fee0300c Data: 4189
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device [1043:1767]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.5 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI
Express Port 6 [8086:2849] (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
Memory behind bridge: fe900000-fe9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1
unlimited
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #6, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0
<256ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+
BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable+
Address: fee0300c Data: 4191
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device [1043:1767]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB
UHCI Controller #1 [8086:2830] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:1767]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at dc00 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB
UHCI Controller #2 [8086:2831] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:1767]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at d880 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB
UHCI Controller #3 [8086:2832] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:1767]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d800 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2
EHCI Controller #1 [8086:2836] (rev 03) (prog-if 20)
Subsystem: ASUSTeK Computer Inc. Device [1043:1767]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at febff000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev f3) (prog-if 01)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=08, subordinate=08, sec-latency=32
Memory behind bridge: fea00000-feafffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: ASUSTeK Computer Inc. Device [1043:1767]
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC
Interface Controller [8086:2815] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:1767]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information <?>
Kernel modules: iTCO_wdt
00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM
(ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03) (prog-if 8a [Master
SecP PriP])
Subsystem: ASUSTeK Computer Inc. Device [1043:1767]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Kernel driver in use: PIIX_IDE
Kernel modules: ata_generic, piix, ide-pci-generic
00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM
(ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 03) (prog-if 01)
Subsystem: ASUSTeK Computer Inc. Device [1043:1767]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 1273
Region 0: I/O ports at ec00 [size=8]
Region 1: I/O ports at e880 [size=4]
Region 2: I/O ports at e800 [size=8]
Region 3: I/O ports at e480 [size=4]
Region 4: I/O ports at e400 [size=32]
Region 5: Memory at febff800 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/2
Enable+
Address: fee0300c Data: 41a9
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] SATA HBA <?>
Kernel driver in use: ahci
Kernel modules: ahci
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Mobilitiy
Radeon HD 3650 [1002:9591]
Subsystem: ASUSTeK Computer Inc. Device [1043:1633]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at 9000 [size=256]
Region 2: Memory at fdef0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at fdec0000 [disabled] [size=128K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0
<64ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable-
Address: 0000000000000000 Data: 0000
Kernel driver in use: fglrx_pci
Kernel modules: fglrx
01:00.1 Audio device [0403]: ATI Technologies Inc RV635 Audio device
[Radeon HD 3600 Series] [1002:aa20]
Subsystem: ATI Technologies Inc RV635 Audio device [Radeon HD 3600
Series] [1002:aa20]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fdeec000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0
<64ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable-
Address: 0000000000000000 Data: 0000
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8055
PCI-E Gigabit Ethernet Controller [11ab:4363] (rev 13)
Subsystem: ASUSTeK Computer Inc. Device [1043:1705]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 1272
Region 0: Memory at fdffc000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at a800 [size=256]
Expansion ROM at fdfc0000 [disabled] [size=128K]
Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data <?>
Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable+
Address: 00000000fee0300c Data: 41b9
Capabilities: [e0] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1
unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0
<256ns, L1 unlimited
ClockPM+ Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
Kernel driver in use: sky2
Kernel modules: sky2
06:00.0 SATA controller [0106]: JMicron Technologies, Inc. JMicron
20360/20363 AHCI Controller [197b:2360] (rev 02) (prog-if 01)
Subsystem: ASUSTeK Computer Inc. Device [1043:1348]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at cc00 [size=8]
Region 1: I/O ports at c880 [size=4]
Region 2: I/O ports at c800 [size=8]
Region 3: I/O ports at c480 [size=4]
Region 4: I/O ports at c400 [size=16]
Region 5: Memory at fe8fe000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Express (v1) Legacy Endpoint, MSI 01
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <1us, L1
<16us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
Kernel driver in use: ahci
Kernel modules: ahci
07:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 4965 AG
or AGN Network Connection [8086:4229] (rev 61)
Subsystem: Intel Corporation Device [8086:1101]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fe9fe000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [c8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable-
Address: 00000000fee0300c Data: 41c9
Capabilities: [e0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0
<128ns, L1 <64us
ClockPM+ Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
Kernel driver in use: iwl4965
Kernel modules: iwl4965
08:01.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394
Controller [1180:0832] (rev 05) (prog-if 10)
Subsystem: ASUSTeK Computer Inc. Device [1043:1767]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at feaff800 (32-bit, non-prefetchable) [size=2K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME+
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci
08:01.1 SD Host controller [0805]: Ricoh Co Ltd R5C822
SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 22)
Subsystem: ASUSTeK Computer Inc. Device [1043:1767]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at feaff400 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
Kernel driver in use: sdhci
Kernel modules: sdhci
08:01.2 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller
[1180:0843] (rev 12)
Subsystem: ASUSTeK Computer Inc. Device [1043:1767]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 3
Region 0: Memory at feaff000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
Kernel driver in use: ricoh-mmc
Kernel modules: ricoh_mmc
08:01.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus
Host Adapter [1180:0592] (rev 12)
Subsystem: ASUSTeK Computer Inc. Device [1043:1767]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 3
Region 0: Memory at feafec00 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
08:01.4 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller
[1180:0852] (rev ff) (prog-if ff)
!!! Unknown header type 7f
--- End Message ---