Package:
linux-image-2.6.30-1-amd64
Version:
2.6.30-2
Severity:
normal
-- Package-specific
info:
**
Version:
Linux version 2.6.30-1-amd64 (Debian 2.6.30-2) (waldi@debian.org) (gcc
version 4.3.3 (Debian 4.3.3-13) ) #1 SMP Wed Jul 8 12:20:34 UTC
2009
** Command
line:
root=UUID=ac871eeb-c7ba-444b-b066-42c4956f3054 ro
quiet
** Not
tainted
** Kernel
log:
[ 2.652026] usb 2-1: new low speed USB device using uhci_hcd and
address
2
[ 2.688270] ide-cd driver
5.00
[ 2.690511] ide-cd: hda: ATAPI 48X DVD-ROM DVD-R/RAM CD-R/RW drive,
2048kB
Cache
[ 2.690519] Uniform CD-ROM driver Revision:
3.20
[ 2.697967] Driver 'sd' needs updating - please use bus_type
methods
[ 2.698079] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors:
(250 GB/232
GiB)
[ 2.698095] sd 0:0:0:0: [sda] Write Protect is
off
[ 2.698098] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00
00
[ 2.698121] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or
FUA
[ 2.698220] sda:ide-cd: hdb: ATAPI 48X CD-ROM CD-R/RW drive,
2048kB
Cache
[ 2.708197] sda1 sda2 < sda5>
sda3
[ 2.738064] sd 0:0:0:0: [sda] Attached SCSI
disk
[ 2.829801] usb 2-1: New USB device found, idVendor=046d,
idProduct=c505
[ 2.829804] usb 2-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 2.829807] usb 2-1: Product: USB
Receiver
[ 2.829809] usb 2-1: Manufacturer:
Logitech
[ 2.829902] usb 2-1: configuration #1 chosen from 1
choice
[ 2.840508] usbcore: registered new interface driver
hiddev
[ 2.854132] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input1
[ 2.854192] generic-usb 0003:046D:C505.0001: input,hidraw0: USB HID
v1.10 Keyboard [Logitech USB Receiver] on
usb-0000:00:1d.0-1/input0
[ 2.887310] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input2
[ 2.887367] generic-usb 0003:046D:C505.0002: input,hidraw1: USB HID
v1.10 Mouse [Logitech USB Receiver] on
usb-0000:00:1d.0-1/input1
[ 2.887384] usbcore: registered new interface driver
usbhid
[ 2.887388] usbhid: v2.6:USB HID core
driver
[ 3.317548] PM: Starting manual resume from
disk
[ 3.349793] kjournald starting. Commit interval 5
seconds
[ 3.349803] EXT3-fs: mounted filesystem with ordered data
mode.
[ 4.896275] udev: starting version
141
[ 5.247682] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 5.247691] ACPI: Power Button
[PWRF]
[ 5.247758] input: Sleep Button as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 5.247766] ACPI: Sleep Button
[SLPB]
[ 5.366486] processor ACPI_CPU:00: registered as
cooling_device0
[ 5.366491] ACPI: Processor [CPU0] (supports 8 throttling
states)
[ 5.366652] processor ACPI_CPU:01: registered as
cooling_device1
[ 5.366657] ACPI: Processor [CPU1] (supports 8 throttling
states)
[ 5.516855] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low)
-> IRQ
19
[ 5.529225] parport_pc 00:08: reported by Plug and Play
ACPI
[ 5.529304] parport0: PC-style at 0x378 (0x778), irq 7
[PCSPP,TRISTATE]
[ 5.616802] input: PC Speaker as
/devices/platform/pcspkr/input/input5
[ 5.617823] intel_rng: Firmware space is locked read-only. If you
can't
or
[ 5.617825] intel_rng: don't want to disable this in firmware setup,
and
if
[ 5.617826] intel_rng: you are certain that your system has a
functional
[ 5.617828] intel_rng: RNG, try using the 'no_fwh_detect'
option.
[ 6.292260] alloc irq_desc for 22 on cpu 0 node
0
[ 6.292264] alloc kstat_irqs on cpu 0 node
0
[ 6.292273] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low)
-> IRQ
22
[ 6.292308] HDA Intel 0000:00:1b.0: setting latency timer to
64
[ 6.372225] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input6
[ 6.572151] input: HDA Intel Line In at Ext Rear Jack as
/devices/pci0000:00/0000:00:1b.0/input/input7
[ 6.572228] input: HDA Intel Mic at Ext Front Jack as
/devices/pci0000:00/0000:00:1b.0/input/input8
[ 6.572303] input: HDA Intel Mic at Ext Rear Jack as
/devices/pci0000:00/0000:00:1b.0/input/input9
[ 6.572365] input: HDA Intel Line Out at Ext Rear Jack as
/devices/pci0000:00/0000:00:1b.0/input/input10
[ 6.572426] input: HDA Intel Line Out at Ext Rear Jack as
/devices/pci0000:00/0000:00:1b.0/input/input11
[ 6.572487] input: HDA Intel Line Out at Ext Rear Jack as
/devices/pci0000:00/0000:00:1b.0/input/input12
[ 6.572547] input: HDA Intel Line Out at Ext Rear Jack as
/devices/pci0000:00/0000:00:1b.0/input/input13
[ 6.572607] input: HDA Intel HP Out at Ext Front Jack as
/devices/pci0000:00/0000:00:1b.0/input/input14
[ 8.030754] Adding 23133560k swap on /dev/sda5. Priority:-1
extents:1
across:23133560k
[ 8.108937] EXT3 FS on sda1, internal
journal
[ 9.083721] loop: module
loaded
[ 9.140274] coretemp coretemp.0: Using relative temperature
scale!
[ 9.140325] coretemp coretemp.1: Using relative temperature
scale!
[ 9.698740] kjournald starting. Commit interval 5
seconds
[ 9.698950] EXT3 FS on sda3, internal
journal
[ 9.698955] EXT3-fs: mounted filesystem with ordered data
mode.
[ 10.878340] ADDRCONF(NETDEV_UP): eth0: link is not
ready
[ 14.804118] e100: eth0 NIC Link is Up 100 Mbps Full
Duplex
[ 14.804370] ADDRCONF(NETDEV_CHANGE): eth0: link becomes
ready
[ 18.814231] Bluetooth: Core ver
2.15
[ 18.815187] NET: Registered protocol family
31
[ 18.815190] Bluetooth: HCI device and connection manager
initialized
[ 18.815194] Bluetooth: HCI socket layer
initialized
[ 18.918278] Bluetooth: L2CAP ver
2.13
[ 18.918281] Bluetooth: L2CAP socket layer
initialized
[ 18.921003] Bluetooth: SCO (Voice Link) ver
0.6
[ 18.921006] Bluetooth: SCO socket layer
initialized
[ 18.925199] Bluetooth: RFCOMM socket layer
initialized
[ 18.925210] Bluetooth: RFCOMM TTY layer
initialized
[ 18.925212] Bluetooth: RFCOMM ver
1.11
[ 18.993925] Bluetooth: BNEP (Ethernet Emulation) ver
1.3
[ 18.993928] Bluetooth: BNEP filters: protocol
multicast
[ 19.068156] Bridge firewalling
registered
[ 19.168593] lp0: using parport0
(interrupt-driven).
[ 19.188091] ppdev: user-space parallel port
driver
[ 22.021630] [drm] Initialized drm 1.1.0
20060810
[ 22.032652] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[ 22.032658] pci 0000:00:02.0: setting latency timer to
64
[ 22.045680] alloc irq_desc for 27 on cpu 0 node
0
[ 22.045684] alloc kstat_irqs on cpu 0 node
0
[ 22.045699] pci 0000:00:02.0: irq 27 for
MSI/MSI-X
[ 22.045768] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on
minor
0
[ 25.548009] eth0: no IPv6 routers
present
[ 37.746007] CPU0 attaching NULL
sched-domain.
[ 37.746014] CPU1 attaching NULL
sched-domain.
[ 37.756077] CPU0 attaching
sched-domain:
[ 37.756081] domain 0: span 0-1 level
MC
[ 37.756084] groups: 0
1
[ 37.756090] CPU1 attaching
sched-domain:
[ 37.756093] domain 0: span 0-1 level
MC
[ 37.756096] groups: 1
0
** Loaded modules:
Module Size Used by
i915 166696 2
drm 172464 3 i915
i2c_algo_bit 5988 1 i915
video 21852 1 i915
output 3472 1 video
ppdev 7800 0
lp 10612 0
bridge 48176 0
stp 2868 1 bridge
bnep 13776 2
rfcomm 35920 0
sco 10996 2
l2cap 21136 4 bnep,rfcomm
bluetooth 54932 6 bnep,rfcomm,sco,l2cap
acpi_cpufreq 8912 0
cpufreq_stats 4660 0
cpufreq_userspace 3636 0
cpufreq_powersave 1792 0
cpufreq_conservative 7928 0
coretemp 6656 0
loop 15964 0
snd_hda_codec_idt 62460 1
snd_hda_intel 26680 3
snd_hda_codec 75168 2 snd_hda_codec_idt,snd_hda_intel
snd_hwdep 8120 1 snd_hda_codec
snd_pcm_oss 37200 0
snd_mixer_oss 15072 1 snd_pcm_oss
snd_pcm 78440 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_midi 6976 0
snd_rawmidi 22992 1 snd_seq_midi
snd_seq_midi_event 7696 1 snd_seq_midi
snd_seq 51312 2 snd_seq_midi,snd_seq_midi_event
snd_timer 21824 2 snd_pcm,snd_seq
snd_seq_device 7476 3 snd_seq_midi,snd_rawmidi,snd_seq
snd 63864 17
snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 7984 1
snd
pcspkr 2800
0
parport_pc 27080
1
serio_raw 5844
0
i2c_i801 10464
0
evdev 10448
12
snd_page_alloc 9968 2
snd_hda_intel,snd_pcm
rng_core 4872
0
i2c_core 25424 4
i915,drm,i2c_algo_bit,i2c_i801
psmouse 42156
0
parport 38224 3
ppdev,lp,parport_pc
processor 40112 1
acpi_cpufreq
button 6512
0
ext3 122736
2
jbd 48072 1
ext3
mbcache 8804 1
ext3
usbhid 37248
0
hid 41328 1
usbhid
sd_mod 33688
4
crc_t10dif 2096 1
sd_mod
ide_cd_mod 29032
0
cdrom 34360 1
ide_cd_mod
ata_generic 5924
0
ide_pci_generic 4964
0
ata_piix 25124
3
uhci_hcd 22192
0
libata 175004 2
ata_generic,ata_piix
e100 32472
0
mii 5600 1
e100
piix 7256
0
scsi_mod 158464 2
sd_mod,libata
intel_agp 28752
1
ehci_hcd 33676
0
ide_core 104992 3
ide_cd_mod,ide_pci_generic,piix
thermal 15952
0
fan 5224
0
thermal_sys 16496 4
video,processor,thermal,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82946GZ/PL/GL Memory
Controller Hub [8086:2970] (rev 02)
Subsystem: Intel Corporation Device
[8086:5354]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast>TAbort-
SERR-
Kernel driver in use:
agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 82946GZ/GL
Integrated Graphics Controller [8086:2972] (rev 02) (prog-if 00 [VGA
controller])
Subsystem: Intel Corporation Device
[8086:5354]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast>TAbort-
SERR-
[disabled]
Capabilities:
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High
Definition Audio Controller [8086:27d8] (rev 01)
Subsystem: Intel Corporation Device
[8086:a201]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-
SERR-
Kernel driver in use: HDA
Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI
Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-
SERR- TAbort-
Reset-
FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat-
DiscTmrSERREn-
Capabilities:
Kernel driver in use:
pcieport-driver
00:1c.2 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI
Express Port 3 [8086:27d4] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-
SERR- TAbort-
Reset-
FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat-
DiscTmrSERREn-
Capabilities:
Kernel driver in use:
pcieport-driver
00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI
Express Port 4 [8086:27d6] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-
SERR- TAbort-
Reset-
FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat-
DiscTmrSERREn-
Capabilities:
Kernel driver in use:
pcieport-driver
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family)
USB UHCI Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device
[8086:5354]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium>TAbort-
SERR- TAbort-
SERR- TAbort-
SERR- TAbort-
SERR- TAbort-
SERR-
Kernel driver in use:
ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge
[8086:244e] (rev e1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-
SERR- TAbort-
Reset-
FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat-
DiscTmrSERREn-
Capabilities:
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family)
LPC Interface Bridge [8086:27b8] (rev 01)
Subsystem: Intel Corporation Device
[8086:5354]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium>TAbort-
SERR-
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE
Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corporation Device
[8086:5354]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium>TAbort-
SERR- TAbort-
SERR-
Kernel driver in use:
ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus
Controller [8086:27da] (rev 01)
Subsystem: Intel Corporation Device
[8086:5354]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium>TAbort-
SERR- TAbort-
SERR-
Kernel driver in use: e100
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.30-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.30-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.27 Debian configuration
management sy
ii initramfs-tools [linux-initra 0.93.3 tools for generating an
initramfs
ii module-init-tools 3.9-2 tools for managing Linux
kernel mo
linux-image-2.6.30-1-amd64 recommends no packages.
Versions of packages linux-image-2.6.30-1-amd64 suggests:
ii grub 0.97-53 GRand Unified Bootloader
(Legacy v
pn linux-doc-2.6.30 (no description available)
-- debconf information:
linux-image-2.6.30-1-amd64/preinst/initrd-2.6.30-1-amd64:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.30-1-amd64/postinst/create-kimage-link-2.6.30-1-amd64:
true
linux-image-2.6.30-1-amd64/preinst/abort-overwrite-2.6.30-1-amd64:
linux-image-2.6.30-1-amd64/postinst/bootloader-error-2.6.30-1-amd64:
linux-image-2.6.30-1-amd64/preinst/lilo-has-ramdisk:
linux-image-2.6.30-1-amd64/postinst/old-dir-initrd-link-2.6.30-1-amd64: true
linux-image-2.6.30-1-amd64/postinst/old-initrd-link-2.6.30-1-amd64: true
linux-image-2.6.30-1-amd64/postinst/kimage-is-a-directory:
linux-image-2.6.30-1-amd64/preinst/lilo-initrd-2.6.30-1-amd64: true
linux-image-2.6.30-1-amd64/prerm/removing-running-kernel-2.6.30-1-amd64:
true
linux-image-2.6.30-1-amd64/prerm/would-invalidate-boot-loader-2.6.30-1-amd64:
true
linux-image-2.6.30-1-amd64/preinst/elilo-initrd-2.6.30-1-amd64: true
linux-image-2.6.30-1-amd64/preinst/bootloader-initrd-2.6.30-1-amd64: true
linux-image-2.6.30-1-amd64/preinst/overwriting-modules-2.6.30-1-amd64:
true
linux-image-2.6.30-1-amd64/postinst/depmod-error-2.6.30-1-amd64: false
linux-image-2.6.30-1-amd64/preinst/failed-to-move-modules-2.6.30-1-amd64:
linux-image-2.6.30-1-amd64/postinst/depmod-error-initrd-2.6.30-1-amd64:
false
linux-image-2.6.30-1-amd64/preinst/abort-install-2.6.30-1-amd64:
linux-image-2.6.30-1-amd64/postinst/bootloader-test-error-2.6.30-1-amd64:
linux-image-2.6.30-1-amd64/postinst/old-system-map-link-2.6.30-1-amd64: true
Bug's still here.
_________________________________________________________________
Naviga più semplice, più veloce e più sicuro. Scarica Internet Explorer 8 per MSN!
http://cid-16be95750dd16d04.skydrive.live.com/self.aspx/le%20PV%20in%20viaggio!/89.JPG