[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#529436: marked as done (linux-image-2.6.26-2-vserver-686-bigmem: Only 3.2Gb of memory accessible out of 16gb in system)

Your message dated Fri, 12 Jun 2009 03:58:48 +0100
with message-id <1244775528.4616.27.camel@deadeye>
and subject line Re: linux-image-2.6.26-2-vserver-686-bigmem: Only 3.2Gb of memory accessible out of 16gb in system
has caused the Debian Bug report #529436,
regarding linux-image-2.6.26-2-vserver-686-bigmem: Only 3.2Gb of memory accessible out of 16gb in system
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
529436: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=529436
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: linux-image-2.6.26-2-vserver-686-bigmem
Version: 2.6.26-15lenny2
Severity: important


System is a Dell R610 with 16GB of RAM but only the first 3.2GB is
currently being detected. This is using a bigmem kernel so should expect to
see all 16GB.

Not quite sure where to start looking into this but a colleague suspects
that it may be related to some E820 patches made by Paul Jackson in May
2008. Commit refs in linux-2.6 git tree are:

c3965bd15118742d72b4bc1a290d37b3f081eb98
028b785888c523baccdf27af0cdbf1deb92edec0
6e9bcc796b120d17b08dde7ab958b82ddb899889
5b7eb2e9ef4e467a1248537b47a63bab265be3cc
69c9189320c46b14e5ae3ad4b3a0d35cc63cba20

with a later bug fix in commit:

1b72691ce35812ff865d778f303779e774d2b098

I haven't had a chance to try building this patch into the kernel yet to
see if this resolves the issue.

I've also tried using a standard bigmem kernel (no vserver) and the same
problem is reported.

-- Package-specific info:
** Version:
Linux version 2.6.26-2-vserver-686-bigmem (Debian 2.6.26-15lenny2) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Mon May 11 21:25:01 UTC 2009

** Command line:
root=/dev/mapper/vg0-root ro 

** Not tainted

** Kernel log:
[   57.137973] raid6: sse2x1    6599 MB/s
[   57.206017] raid6: sse2x2    7757 MB/s
[   57.206017] raid6: using algorithm sse2x2 (7757 MB/s)
[   57.206017] md: raid6 personality registered for level 6
[   57.206017] md: raid5 personality registered for level 5
[   57.206017] md: raid4 personality registered for level 4
[   57.213883] md: md0 stopped.
[   57.744540] md: md1 stopped.
[   57.767236] md: bind<sdb2>
[   57.767475] md: bind<sdc2>
[   57.767719] md: bind<sdd2>
[   57.767958] md: bind<sda2>
[   57.785268] raid5: device sda2 operational as raid disk 0
[   57.785268] raid5: device sdc2 operational as raid disk 2
[   57.785268] raid5: device sdb2 operational as raid disk 1
[   57.785349] raid5: allocated 3170kB for md1
[   57.785349] raid5: raid level 5 set md1 active with 3 out of 3 devices, algorithm 2
[   57.785349] RAID5 conf printout:
[   57.785349]  --- rd:3 wd:3
[   57.785349]  disk 0, o:1, dev:sda2
[   57.785349]  disk 1, o:1, dev:sdb2
[   57.785349]  disk 2, o:1, dev:sdc2
[   57.820865] md: bind<sda1>
[   57.821018] md: bind<sdc1>
[   57.821188] md: bind<sdb1>
[   57.821345] md: bind<sdd1>
[   57.842833] raid1: raid set md0 active with 4 out of 4 mirrors
[   57.913540] device-mapper: uevent: version 1.0.3
[   57.913600] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[   58.191150] PM: Starting manual resume from disk
[   58.218329] kjournald starting.  Commit interval 5 seconds
[   58.218329] EXT3-fs: mounted filesystem with ordered data mode.
[   59.156079] udevd version 125 started
[   59.618058] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   59.850599] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[   59.850599] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0860)
[   59.850599] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   59.901280] input: Power Button (FF) as /class/input/input3
[   59.925056] ACPI: Power Button (FF) [PWRF]
[   59.937917] input: PC Speaker as /class/input/input4
[   60.751806] EXT3 FS on dm-0, internal journal
[   61.206319] loop: module loaded
[   68.757434] kjournald starting.  Commit interval 5 seconds
[   68.775713] EXT3 FS on md0, internal journal
[   68.775713] EXT3-fs: mounted filesystem with ordered data mode.
[   68.778328] kjournald starting.  Commit interval 5 seconds
[   68.782095] EXT3 FS on dm-1, internal journal
[   68.782095] EXT3-fs: mounted filesystem with ordered data mode.
[   68.790485] kjournald starting.  Commit interval 5 seconds
[   68.820577] EXT3 FS on dm-2, internal journal
[   68.820577] EXT3-fs: mounted filesystem with ordered data mode.
[   68.828855] kjournald starting.  Commit interval 5 seconds
[   68.873861] EXT3 FS on dm-4, internal journal
[   68.873861] EXT3-fs: mounted filesystem with ordered data mode.
[   68.879519] kjournald starting.  Commit interval 5 seconds
[   68.897229] EXT3 FS on dm-5, internal journal
[   68.897229] EXT3-fs: mounted filesystem with ordered data mode.
[   68.905187] kjournald starting.  Commit interval 5 seconds
[   68.922797] EXT3 FS on dm-6, internal journal
[   68.922797] EXT3-fs: mounted filesystem with ordered data mode.
[   68.958636] Adding 7811064k swap on /dev/mapper/vg0-swap.  Priority:-1 extents:1 across:7811064k
[   69.644690] ip_tables: (C) 2000-2006 Netfilter Core Team
[   70.294030] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   70.734394] bnx2: eth0: using MSIX
[   70.734669] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   71.226705] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
[   71.226705] All bugs added by David S. Miller <davem@redhat.com>
[   71.307617] ADDRCONF(NETDEV_UP): eth0.1234: link is not ready
[   74.893376] bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex
[   74.893376] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   74.893376] ADDRCONF(NETDEV_CHANGE): eth0.1234: link becomes ready
[   80.207299] ipmi message handler version 39.2
[   80.284014] IPMI System Interface driver.
[   80.284014] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 0
[   80.413534] ipmi: Found new BMC (man_id: 0x0002a2,  prod_id: 0x0100, dev_id: 0x20)
[   80.413534] IPMI kcs interface initialized
[   80.431921] ipmi device interface
[   81.381714] Not cloning cgroup for unused subsystem ns
[   81.383239] Not cloning cgroup for unused subsystem ns
[   81.448114] CE: hpet increasing min_delta_ns to 15000 nsec
[   81.840777] Not cloning cgroup for unused subsystem ns
[   81.840777] Not cloning cgroup for unused subsystem ns
[   83.510514] dummy0: no IPv6 routers present
[   89.036189] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
[   89.560164] eth0: no IPv6 routers present
[   90.728597] eth0.1234: no IPv6 routers present
[  119.381735] CE: hpet increasing min_delta_ns to 22500 nsec
[ 1124.956006] CE: hpet increasing min_delta_ns to 33750 nsec
[ 6245.980812] CE: hpet increasing min_delta_ns to 50624 nsec
[ 7562.153029] usb 5-3.2: USB disconnect, address 3
[42379.491560] bnx2: eth0 NIC Copper Link is Down
[43684.428257] bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON
[43722.324028] bnx2: eth0 NIC Copper Link is Down
[43727.811074] bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON
[43729.413891] bnx2: eth0 NIC Copper Link is Down
[43732.460827] bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON
[46224.701583] bnx2: eth0 NIC Copper Link is Down
[46227.302890] bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON
[72890.868115] bnx2: eth0 NIC Copper Link is Down
[72901.047313] bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON

** Loaded modules:
Module                  Size  Used by
ipmi_devintf            6984  0 
ipmi_si                34124  0 
ipmi_msghandler        30360  2 ipmi_devintf,ipmi_si
dummy                   3232  0 
8021q                  16832  0 
ipt_MASQUERADE          3360  2 
iptable_nat             5448  1 
nf_nat                 16312  2 ipt_MASQUERADE,iptable_nat
xt_tcpudp               3584  7 
nf_conntrack_ipv4      13036  4 iptable_nat,nf_nat
xt_state                2784  1 
nf_conntrack           56308  5 ipt_MASQUERADE,iptable_nat,nf_nat,nf_conntrack_ipv4,xt_state
iptable_filter          3392  1 
ip_tables              10928  2 iptable_nat,iptable_filter
x_tables               14052  5 ipt_MASQUERADE,iptable_nat,xt_tcpudp,xt_state,ip_tables
loop                   13676  0 
serio_raw               5508  0 
pcspkr                  3200  0 
psmouse                33104  0 
button                  6864  0 
iTCO_wdt               10276  0 
evdev                   8768  0 
dcdbas                  7076  0 
ext3                  109032  7 
jbd                    40212  1 ext3
mbcache                 7876  1 ext3
dm_mirror              15872  0 
dm_log                  9252  1 dm_mirror
dm_snapshot            15108  0 
dm_mod                 47368  19 dm_mirror,dm_log,dm_snapshot
raid456               117776  1 
async_xor               3200  1 raid456
async_memcpy            2560  1 raid456
async_tx                3168  1 raid456
xor                    15464  2 raid456,async_xor
raid1                  18784  1 
md_mod                 67804  4 raid456,raid1
sg                     27732  0 
sr_mod                 14084  0 
cdrom                  30976  1 sr_mod
sd_mod                 22968  12 
ide_pci_generic         4676  0 [permanent]
ide_core               96968  1 ide_pci_generic
usbhid                 36704  0 
hid                    33952  1 usbhid
ff_memless              5160  1 usbhid
ata_generic             5444  0 
mptsas                 23976  8 
mptscsih               22624  1 mptsas
ata_piix               15012  0 
mptbase                52580  2 mptsas,mptscsih
libata                141280  2 ata_generic,ata_piix
scsi_transport_sas     26240  1 mptsas
dock                    9072  1 libata
scsi_mod              130092  7 sg,sr_mod,sd_mod,mptsas,mptscsih,libata,scsi_transport_sas
ehci_hcd               29388  0 
uhci_hcd               19504  0 
usbcore               119248  4 usbhid,ehci_hcd,uhci_hcd
bnx2                   54536  0 
firmware_class          7584  1 bnx2
thermal                15996  0 
processor              33504  17 thermal
fan                     4932  0 
thermal_sys            11624  3 thermal,processor,fan

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation QuickPath Architecture I/O Hub to ESI Port [8086:3403] (rev 13)
	Subsystem: Dell Device [1028:0236]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 15
	Capabilities: <access denied>

00:01.0 PCI bridge [0604]: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 1 [8086:3408] (rev 13) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	Memory behind bridge: d6000000-d9ffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:03.0 PCI bridge [0604]: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 3 [8086:340a] (rev 13) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	Memory behind bridge: da000000-ddffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:07.0 PCI bridge [0604]: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 7 [8086:340e] (rev 13) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:09.0 PCI bridge [0604]: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 9 [8086:3410] (rev 13) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:14.0 PIC [0800]: Intel Corporation QuickPath Architecture I/O Hub System Management Registers [8086:342e] (rev 13) (prog-if 00 [8259])
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>

00:14.1 PIC [0800]: Intel Corporation QuickPath Architecture I/O Hub GPIO and Scratch Pad Registers [8086:3422] (rev 13) (prog-if 00 [8259])
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>

00:14.2 PIC [0800]: Intel Corporation QuickPath Architecture I/O Hub Control Status and RAS Registers [8086:3423] (rev 13) (prog-if 00 [8259])
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>

00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Dell Device [1028:0236]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 17
	Region 4: I/O ports at ec40 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Dell Device [1028:0236]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 18
	Region 4: I/O ports at ec60 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI])
	Subsystem: Dell Device [1028:0236]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 19
	Region 0: Memory at df0ff800 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd

00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 0000f000-0000ffff
	Memory behind bridge: df100000-df2fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Dell Device [1028:0236]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 21
	Region 4: I/O ports at ec80 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Dell Device [1028:0236]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 20
	Region 4: I/O ports at eca0 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI])
	Subsystem: Dell Device [1028:0236]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 21
	Region 0: Memory at df0ffc00 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
	Memory behind bridge: de000000-deffffff
	Prefetchable memory behind bridge: 00000000d5800000-00000000d5ffffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801IB (ICH9) LPC Interface Controller [8086:2918] (rev 02)
	Subsystem: Dell Device [1028:0236]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel modules: iTCO_wdt

00:1f.2 IDE interface [0101]: Intel Corporation 82801IB (ICH9) 2 port SATA IDE Controller [8086:2921] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
	Subsystem: Dell Device [1028:0236]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 23
	Region 0: I/O ports at ec10 [size=8]
	Region 1: I/O ports at ec08 [size=4]
	Region 2: I/O ports at ec18 [size=8]
	Region 3: I/O ports at ec0c [size=4]
	Region 4: I/O ports at ec20 [size=16]
	Region 5: I/O ports at ec30 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: ata_piix
	Kernel modules: ata_piix

01:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet [14e4:1639] (rev 20)
	Subsystem: Dell Device [1028:0236]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 36
	Region 0: Memory at d6000000 (64-bit, non-prefetchable) [size=32M]
	Capabilities: <access denied>
	Kernel driver in use: bnx2
	Kernel modules: bnx2

01:00.1 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet [14e4:1639] (rev 20)
	Subsystem: Dell Device [1028:0236]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 48
	Region 0: Memory at d8000000 (64-bit, non-prefetchable) [size=32M]
	Capabilities: <access denied>
	Kernel driver in use: bnx2
	Kernel modules: bnx2

02:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet [14e4:1639] (rev 20)
	Subsystem: Dell Device [1028:0236]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 32
	Region 0: Memory at da000000 (64-bit, non-prefetchable) [size=32M]
	Capabilities: <access denied>
	Kernel driver in use: bnx2
	Kernel modules: bnx2

02:00.1 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet [14e4:1639] (rev 20)
	Subsystem: Dell Device [1028:0236]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 42
	Region 0: Memory at dc000000 (64-bit, non-prefetchable) [size=32M]
	Capabilities: <access denied>
	Kernel driver in use: bnx2
	Kernel modules: bnx2

03:00.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic SAS1068E PCI-Express Fusion-MPT SAS [1000:0058] (rev 08)
	Subsystem: Dell SAS 6/iR Integrated RAID Controller [1028:1f10]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 218
	Region 0: I/O ports at fc00 [size=256]
	Region 1: Memory at df2ec000 (64-bit, non-prefetchable) [size=16K]
	Region 3: Memory at df2f0000 (64-bit, non-prefetchable) [size=64K]
	Expansion ROM at df100000 [disabled] [size=1M]
	Capabilities: <access denied>
	Kernel driver in use: mptsas
	Kernel modules: mptsas

06:03.0 VGA compatible controller [0300]: Matrox Graphics, Inc. MGA G200eW WPCM450 [Hermon] - Winbond/Nuvoton [102b:0532] (rev 0a) (prog-if 00 [VGA controller])
	Subsystem: Dell Device [1028:0236]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (4000ns min, 8000ns max), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 10
	Region 0: Memory at d5800000 (32-bit, prefetchable) [size=8M]
	Region 1: Memory at de7fc000 (32-bit, non-prefetchable) [size=16K]
	Region 2: Memory at de800000 (32-bit, non-prefetchable) [size=8M]
	[virtual] Expansion ROM at de000000 [disabled] [size=64K]
	Capabilities: <access denied>


** Sound cards:

-- System Information:
Debian Release: 5.0.1
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.26-2-vserver-686-bigmem (SMP w/16 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.26-2-vserver-686-bigmem depends on:
ii  debconf [debconf-2.0]         1.5.24     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.92o      tools for generating an initramfs
ii  module-init-tools             3.4-1      tools for managing Linux kernel mo

Versions of packages linux-image-2.6.26-2-vserver-686-bigmem recommends:
ii  libc6-i686                    2.7-18     GNU C Library: Shared libraries [i

Versions of packages linux-image-2.6.26-2-vserver-686-bigmem suggests:
ii  grub                       0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn  linux-doc-2.6.26           <none>        (no description available)

-- debconf information:
  shared/kernel-image/really-run-bootloader: true
  linux-image-2.6.26-2-vserver-686-bigmem/preinst/lilo-has-ramdisk:
  linux-image-2.6.26-2-vserver-686-bigmem/postinst/bootloader-test-error-2.6.26-2-vserver-686-bigmem:
  linux-image-2.6.26-2-vserver-686-bigmem/preinst/elilo-initrd-2.6.26-2-vserver-686-bigmem: true
  linux-image-2.6.26-2-vserver-686-bigmem/preinst/abort-overwrite-2.6.26-2-vserver-686-bigmem:
  linux-image-2.6.26-2-vserver-686-bigmem/postinst/depmod-error-2.6.26-2-vserver-686-bigmem: false
  linux-image-2.6.26-2-vserver-686-bigmem/preinst/abort-install-2.6.26-2-vserver-686-bigmem:
  linux-image-2.6.26-2-vserver-686-bigmem/postinst/kimage-is-a-directory:
  linux-image-2.6.26-2-vserver-686-bigmem/preinst/initrd-2.6.26-2-vserver-686-bigmem:
  linux-image-2.6.26-2-vserver-686-bigmem/postinst/bootloader-error-2.6.26-2-vserver-686-bigmem:
  linux-image-2.6.26-2-vserver-686-bigmem/postinst/old-system-map-link-2.6.26-2-vserver-686-bigmem: true
  linux-image-2.6.26-2-vserver-686-bigmem/preinst/failed-to-move-modules-2.6.26-2-vserver-686-bigmem:
  linux-image-2.6.26-2-vserver-686-bigmem/postinst/depmod-error-initrd-2.6.26-2-vserver-686-bigmem: false
  linux-image-2.6.26-2-vserver-686-bigmem/postinst/create-kimage-link-2.6.26-2-vserver-686-bigmem: true
  linux-image-2.6.26-2-vserver-686-bigmem/postinst/old-initrd-link-2.6.26-2-vserver-686-bigmem: true
  linux-image-2.6.26-2-vserver-686-bigmem/prerm/removing-running-kernel-2.6.26-2-vserver-686-bigmem: true
  linux-image-2.6.26-2-vserver-686-bigmem/preinst/bootloader-initrd-2.6.26-2-vserver-686-bigmem: true
  linux-image-2.6.26-2-vserver-686-bigmem/postinst/old-dir-initrd-link-2.6.26-2-vserver-686-bigmem: true
  linux-image-2.6.26-2-vserver-686-bigmem/prerm/would-invalidate-boot-loader-2.6.26-2-vserver-686-bigmem: true
  linux-image-2.6.26-2-vserver-686-bigmem/preinst/overwriting-modules-2.6.26-2-vserver-686-bigmem: true
  linux-image-2.6.26-2-vserver-686-bigmem/preinst/lilo-initrd-2.6.26-2-vserver-686-bigmem: true

--- End Message ---
--- Begin Message --- 
Since this has been fixed by an BIOS update, I think this doesn't need
to be addressed in the kernel.

Ben.

-- 
Ben Hutchings
Beware of programmers who carry screwdrivers. - Leonard Brandwein

Attachment: signature.asc
Description: This is a digitally signed message part


--- End Message ---
Reply to: