[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Bug#530551: Wired network connection shuts down every 4-5min, then automaticaly restarts



reassign 530551 linux-image-2.6.26-1-686 
thanks

On Montag, 25. Mai 2009, Debian Bugs wrote:
> Package: base
> Version: 5.0
> Every 4-5 minutes the wired network connection shuts down. After a couple
> of seconds it back on again. Log text:
>
> May 25 19:22:23 Slejpner kernel: [ 3266.373370] ACPI: PCI Interrupt
> 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17 May 25 19:22:23 Slejpner
> kernel: [ 3266.373370] iwl3945: Radio disabled by HW RF Kill switch May 25
> 19:22:23 Slejpner kernel: [ 3266.373370] ACPI: PCI interrupt for device
> 0000:10:00.0 disabled May 25 19:22:23 Slejpner pppd[4761]: Modem hangup
> May 25 19:22:23 Slejpner kernel: [ 3266.378069] eth0: late interrupt.
> May 25 19:22:23 Slejpner kernel: [ 3266.380211] b44: eth0: powering down
> PHY May 25 19:22:23 Slejpner pppd[4761]: Connect time 4.6 minutes.
> May 25 19:22:23 Slejpner pppd[4761]: Sent 273611 bytes, received 1097617
> bytes. May 25 19:22:23 Slejpner pppd[4761]: Connection terminated.
> May 25 19:22:23 Slejpner kernel: [ 3266.547179] ACPI: PCI Interrupt
> 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17 May 25 19:22:23 Slejpner
> kernel: [ 3266.547179] iwl3945: Radio disabled by HW RF Kill switch May 25
> 19:22:23 Slejpner kernel: [ 3266.547179] ACPI: PCI interrupt for device
> 0000:10:00.0 disabled May 25 19:22:23 Slejpner kernel: [ 3266.553069]
> ADDRCONF(NETDEV_UP): eth0: link is not ready May 25 19:22:23 Slejpner
> kernel: [ 3266.662871] b44: eth0: powering down PHY May 25 19:22:24
> Slejpner kernel: [ 3267.870455] ADDRCONF(NETDEV_UP): eth0: link is not
> ready May 25 19:22:28 Slejpner kernel: [ 3271.219899] b44: eth0: Link is up
> at 100 Mbps, full duplex. May 25 19:22:28 Slejpner kernel: [ 3271.219909]
> b44: eth0: Flow control is off for TX and off for RX. May 25 19:22:28
> Slejpner kernel: [ 3271.220250] ADDRCONF(NETDEV_CHANGE): eth0: link becomes
> ready May 25 19:22:53 Slejpner pppd[4761]: PPP session is 3757
> May 25 19:22:53 Slejpner pppd[4761]: Using interface ppp0
> May 25 19:22:53 Slejpner pppd[4761]: Connect: ppp0 <--> eth0
> May 25 19:22:53 Slejpner pppd[4761]: CHAP authentication succeeded
> May 25 19:22:53 Slejpner pppd[4761]: CHAP authentication succeeded
> May 25 19:22:53 Slejpner pppd[4761]: peer from calling number
> 00:90:1A:A0:F4:5A authorized May 25 19:22:54 Slejpner pppd[4761]: local  IP
> address 78.54.111.171 May 25 19:22:54 Slejpner pppd[4761]: remote IP
> address 213.191.76.38 May 25 19:22:54 Slejpner pppd[4761]: primary   DNS
> address 213.191.74.19 May 25 19:22:54 Slejpner pppd[4761]: secondary DNS
> address 62.109.123.197
>
> Other stuff that might help:
>
> arne@Slejpner:~$ uname -a
> Linux Slejpner 2.6.26-1-686 #1 SMP Sat Jan 10 18:29:31 UTC 2009 i686
> GNU/Linux arne@Slejpner:~$
> arne@Slejpner:~$ ls -l /lib/libc.so.6
> lrwxrwxrwx 1 root root 11 16. Mai 00:36 /lib/libc.so.6 -> libc-2.7.so
> arne@Slejpner:~$
> arne@Slejpner:~$ dpkg -s libc6 | grep ^Version
> Version: 2.7-18
> arne@Slejpner:~$ reportbug -q --template -T none -s none -S normal -b
> --list-cc none -q base Detected character set: UTF-8
> Please change your locale if this is incorrect.
>
> Using 'Arne <MyDebian.bugs@web.de>' as your from address.
> Getting status for base...
> Will send report to Debian (per lsb_release).
>
> Content-Type: text/plain; charset="us-ascii"
> MIME-Version: 1.0
> Content-Transfer-Encoding: 7bit
> From: Arne <MyDebian.bugs@web.de>
> To: Debian Bug Tracking System <submit@bugs.debian.org>
> Subject: none
> X-Debbugs-Cc: MyDebian.bugs@web.de, none
>
> Package: base
> Severity: normal
>
>
>
> -- System Information:
> Debian Release: 5.0
>   APT prefers proposed-updates
>   APT policy: (99, 'proposed-updates'), (99, 'stable')
> Architecture: i386 (i686)
>
> Kernel: Linux 2.6.26-1-686 (SMP w/2 CPU cores)
> Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
> Shell: /bin/sh linked to /bin/bash
>
>
> The system is running on a hp nx7400 laptop with 1 GB ram and 250 GB
> Samsung Harddisk. No problems what soever while using Etch.
>
> Good Luck & thank you very much !
>
>
> __________________________________________________________________________
> Verschicken Sie SMS direkt vom Postfach aus - in alle deutschen und viele
> ausländische Netze zum gleichen Preis!
> https://produkte.web.de/webde_sms/sms


Attachment: signature.asc
Description: This is a digitally signed message part.


Reply to: